The complex of whey protein and pectin: Interactions, functional properties and applications in food colloidal systems - A review

Efficacy of almond gum for coacervation with whey protein isolate- optimization, functionality and characterization: A comparison with high-methoxyl pectin

Complex coacervates of whey protein isolate (WPI) and two polysaccharides (almond gum (AG) and high methoxyl pectin (HMP)) under the different pHs (2.5-6.0) and biopolymer mass ratios (1:1-6:1) were prepared to achieve the maximum coacervate yield (CY). The optimum pH and mixing ratio to obtain the maximum CY of WPI-AG (75.93 %) and WPI-HMP (53.0 %) coacervates were 4.3 and 2:1, and 3.5 and 3:1, respectively. Although higher serum layers in emulsions stabilized by WPI-AG/HMP coacervates were detected at the 90 °C, remarkable heat stability under processing temperatures was obtained in ex-situ emulsions with both complex coacervates. Significantly more cold-storage and ionic stabilities were observed for emulsions formulated with WPI-AG than WPI-HMP. Peak shifts in FTIR spectra in the WPI-AG coacervate compared to the individual WPI and AG biopolymers revealed strong electrostatic interactions between these biopolymers. The absence of crystalline peaks for AG and HMP in X-ray diffraction (XRD) spectra confirmed the complexation of AG and HMP with WPI. Thermogravimetric and microstructural analyses showed that porous, loose mesh-like WPI-AG coacervates had superior thermal stability and structural integrity compared to WPI-HMP coacervates and individual biopolymers, which evidenced a more gradual weight loss pattern. WPI-AG coacervates would be promising for efficient emulsion-based delivery systems.

The non-covalent and covalent interactions of whey proteins and saccharides: influencing factor and utilization in food

During the application of Whey proteins (WPs), they often have complex interactions with saccharides (Ss), another important biopolymer in food substrate. The texture and sensory qualities of foods containing WPs and Ss are largely influenced by the interactions of WPs-Ss. Moreover, the combination of WPs and Ss is possible to produce many excellent functional properties including emulsifying properties and thermal stability. However, the interactions between WPs-Ss are complex and susceptible to some processing conditions. In addition, with different interaction ways, they can be applied in different fields. Therefore, the non-covalent interaction mechanisms between WPs-Ss are firstly summarized in detail, including electrostatic interaction, hydrogen bond, hydrophobic interaction, van der Waals force. Furthermore, the existence modes of WPs-Ss are introduced, including complex coacervates, soluble complexes, segregation, and co-solubility. The covalent interactions of WPs-Ss in food applications are often formed by Maillard reaction (dry or wet heat reaction) and occasionally through enzyme induction. Then, two common influencing factors, pH and temperature, on non-covalent/covalent bonds are introduced. Finally, the applications of WPs-Ss complexes and conjugations in improving WP stability, delivery system, and emulsification are described. This review can improve our understanding of the interactions between WPs-Ss and further promote their wider application.

Effect of apple high-methoxyl pectin on heat-induced gelation of silver carp myofibrillar protein

The effect of adding apple high-methoxy pectin (HMP) (0-3 mg∙mL-1) on heat-induced gel characteristics of low concentration silver carp myofibrillar protein (MP) (15 mg∙mL-1) was studied. It was found that the hardness of gel increased by 20.6 times with adding 2 mg∙mL-1 HMP. Besides, HMP aided in the development of disulfide bonds and the aggregation of hydrophobic groups. During gel formation, the maximal storage modulus (G') of samples supplemented with 2 mg·mL-1 HMP was raised by a factor of 2.7. Of note, the images of SEM showed that protein and water were tightly combined with a proper amount of HMP and made its pores more uniform and dense. Meantime, the addition of moderate amounts of HMP enabled the formation of gels with favorable texture and performance at low concentration of MP was identified, which could provide a theoretical reference for the design and production of flesh low-calorie food gel.

Oleogel classification, physicochemical characterization methods, and typical cases of application in food: a review

The harmful effects of trans and saturated fatty acids have attracted worldwide attention. Edible oleogels, which can structure liquid oils, are promising healthy alternatives to traditional fats. Active research on oleogels is focused on the interaction between unsaturated oils with different fatty acid compositions and low molecular weight or polymer oleogels. The unique network structure inside oleogels has facilitated their application in candies, spreads, meat, and other products. However, the micro- and macro-properties, as well as the functional properties of oleogels vary by preparation method and the system composition. This review discusses the characteristics of oleogels, serving as a reference for the application of oleogels in food products. Specifically, it (i) classifies oleogels and explains the influence of gelling factors on their gelation, (ii) describes the methods for measuring the physicochemical properties of oleogels, and (iii) discusses the current applications of oleogels in food products.

Combined techniques for revealing the mechanism beneath the inhibition effects of pectin on gluten digestibility using static in vitro gastro-duodenal protocols

In the current study, how pectin retards the digestibility of wheat gluten was investigated using a static in vitro gastric-duodenal model. The degree of protein hydrolysis was estimated using the o-phthaldialdehyde method, while the in vitro digestograms were mathematically fitted using a single first-order kinetics model. Peptides' profile, free amino acids compositions, gluten-pectin interactions and their effects on enzymatic activities of proteolytic enzymes as well as on the gluten secondary structures under digestive conditions were studied using combined techniques. Results showed that pectin could retard gluten digestibility through 1). preferential absorption to insoluble gluten aggregates by electrostatic interactions; 2). increasing the helix and reducing the β-sheet content of the solubilized gluten protein fractions in terms of their secondary molecular structures; 3). reducing pepsin activity by forming negatively charged pectin-gluten mixtures which then interacted with the positively charged pepsin molecules. The deeper insight into gluten-pectin interactions and their influences on gluten digestibility under gastrointestinal conditions provides important clues for developing effective forms of dietary fiber to improve the nutritional benefits of plant protein in individuals.

Effect of Callus Cell Immobilization on the Textural and Rheological Properties, Loading, and Releasing of Grape Seed Extract from Pectin Hydrogels

The purpose of the present study was to prepare pectin hydrogels with immobilized Lemna minor callus cells and to identify the effect of cell immobilization on the textural, rheological, and swelling properties; loading; and releasing of grape seed extract (GSE) from the hydrogels. Hardness, adhesiveness, elasticity, the strength of linkage, and complex viscosity decreased with increasing cell content in the hydrogels based on pectin with a degree of methyl esterification (DM) of 5.7% (TVC) and during incubation in gastrointestinal fluids. An increase in the rheological properties and fragility of pectin/callus hydrogels based on pectin with a DM of 33.0% (CP) was observed at a cell content of 0.4 g/mL. TVC-based pectin/callus beads increased their swelling in gastrointestinal fluids as cell content increased. TVC-based beads released GSE very slowly into simulated gastric and intestinal fluids, indicating controlled release. The GSE release rate in colonic fluid decreased with increasing cell content, which was associated with the accumulation of GSE in cells. CP-based beads released GSE completely in the intestinal fluid due to weak textural characteristics and rapid degradation within 10 min. Pectin/callus hydrogels have the ability to preserve GSE for a long time and may have great potential for the development of proanthocyanidin delivery systems due to their novel beneficial physicochemical and textural properties.

Characterization and emulsifying ability evaluation of whey protein-pectin conjugates formed by glycosylation

Glycosylation is a method that enhances the functional properties of proteins by covalently attaching sugars to them. This study aimed at preparing three conjugates (WP-HG, WP-SBP, and WP-RGI) by dry heating method to research the influence of different pectin structures on the functional properties of WP and characterize properties and structures of these conjugates. The research results manifested that the degree of glycosylation (DG) of HG, SBP and RGI were 13.13 % ± 0.07 %, 23.27 % ± 0.3 % and 36.39 % ± 0.3 % respectively, suggesting that the increase of the number of branch chains promoted the glycosylation reaction. The formation of the conjugate was identified by the FT-IR spectroscopy technique. And SEM showed that WP could covalently bind to pectin, resulting in a smoother and denser surface of the conjugates. The circular dichroism analysis exhibited that the glycosylation reaction altered the secondary structure of WP and decreased the α-Helix content. This structural change in the protein spatial conformation led to a decrease in the hydrophobicity of protein surface. But the addition of pectin further regulated the hydrophilic-hydrophobic ratio on the surface of the protein, thus improving the emulsification properties of WP. In addition, the glycosylation could improve the stability of the emulsion, giving it a smaller droplet size, higher Zeta-potential and more stable properties. In a word, this study pointed out the direction for the application of different pectin structures in the development of functional properties of glycosylation products in food ingredients.

Advances in protein-based microcapsules and their applications: A review

Due to their excellent emulsification, biocompatibility, and biological activity, proteins are widely used as microcapsule wall materials for encapsulating drugs, natural bioactive substances, essential oils, probiotics, etc. In this review, we summarize the protein-based microcapsules, discussing the types of proteins utilized in microcapsule wall materials, the preparation process, and the main factors that influence their properties. Additionally, we conclude with examples of the vital role of protein-based microcapsules in advancing the food industry from primary processing to deep processing and their potential applications in the biomedical, chemical, and textile industries. However, the low stability and controllability of protein wall materials lead to degraded performance and quality of microcapsules. Protein complexes with polysaccharides or modifications to proteins are often used to improve the thermal instability, pH sensitivity, encapsulation efficiency and antioxidant capacity of microcapsules. In addition, factors such as wall material composition, wall material ratio, the ratio of core to wall material, pH, and preparation method all play critical roles in the preparation and performance of microcapsules. The application area and scope of protein-based microcapsules can be further expanded by optimizing the preparation process and studying the microcapsule release mechanism and control strategy.

Effect of pectin concentration on emulsifying properties of black soldier fly (Hermetia illucens) larvae albumin modified by pH-shifting and ultrasonication

The effect of pectin concentration on the structural and emulsifying properties of black soldier fly larvae albumin (BSFLA) modified by pH-shifting (pH12) and ultrasound (US) was studied. The results (intrinsic fluorescence, surface hydrophobicity, Fourier transform infrared spectrum, and disulfide bonds) showed that modified BSFLA samples, especially pH12-US, were more likely to bind to pectin through hydrogen bonding, electrostatic interactions, and hydrophobic interactions due to the unfolding of BSFLA, the collapse of disulfide bonds and exposure of hydrophobic groups. Thus, a BSFLA-pectin complex with smaller particle size, more negative charges, and a relatively loose structure was formed. The emulsifying activity (EAI) and stability index (ESI) of pH12-US modified BSFLA were significantly enhanced by the addition of pectin, reaching the highest values (associated with 174.41 % and 643.22 % increase, respectively) at pectin concentration of 1.0 %. Furthermore, the interface modulus of the emulsion prepared by the modified BSFLA was mainly viscous, and had higher apparent viscosity, smaller particle size and droplet size, contributing to higher EAI and ESI. The study findings suggest the addition of pectin to pH12-US treated BSFLA could be used in industry to prepare BSFLA-pectin emulsion with exceptional/desirable properties.

Recent Highlights in Sustainable Bio-Based Edible Films and Coatings for Fruit and Vegetable Applications

The present review paper focuses on recent developments in edible films and coatings made of base compounds from biological sources, namely plants, animals, algae, and microorganisms. These sources include by-products, residues, and wastes from agro-food industries and sea products that contribute to sustainability concerns. Chitosan, derived from animal biological sources, such as crustacean exoskeletons, has been the most studied base compound over the past three years. Polysaccharides typically constitute no more than 3-5% of the film/coating base solution, with some exceptions, like Arabic gum. Proteins and lipids may be present in higher concentrations, such as zein and beeswax. This review also discusses the enrichment of these bio-based films and coatings with various functional and/or bioactive compounds to confer or enhance their functionalities, such as antimicrobial, antioxidant, and anti-enzymatic properties, as well as physical properties. Whenever possible, a comparative analysis among different formulations was performed. The results of the applications of these edible films and coatings to fruit and vegetable products are also described, including shelf life extension, inhibition of microbial growth, and prevention of oxidation. This review also explores novel types of packaging, such as active and intelligent packaging. The potential health benefits of edible films and coatings, as well as the biodegradability of films, are also discussed. Finally, this review addresses recent innovations in the edible films and coatings industry, including the use of nanotechnologies, aerogels, and probiotics, and provides future perspectives and the challenges that the sector is facing.

Nano casein-pectin complex: exploring physicochemical, organoleptic properties, and LAB viability in skimmed milk and low-fat yoghurt

Protein complexes with a nutritional value, heat stability, and gelling properties with no negative impact on culture viability have promising application prospects in the fermentation industry. The aim of the study was to investigate the possibility of applying physical modification seeking high-protein-fortified yoghurt production using the nano casein-pectin NCP complex as an active colloidal system with enhanced structural and thermal properties and monitor the quality properties of the physicochemical, heat stability, rheological, starter culture viability and sensory evaluation of fortified products comparing with the plain control throughout the cold storage. High-energy ball milling (HEBM) technique was used to produce nanoparticles of casein powder and smaller particles of pectin individually, and particle size and zeta potential was assessed. Deferent Nano casein-pectin (NCP) complex formulations were prepared, their physicochemical properties were assessed including protein quality via Amino Acid Analyzer (AAA), viscosity, thermogravimetric analysis (TGA), and then used in fortification of skimmed milk and low-fat yoghurt to monitor the fortification effects. The particle sizes showed to be ≈166 nm and 602.6 nm for nano-casein and pectin, respectively. Milk fortification with the NCP complex has significantly increased the nutritional value represented in increased protein content (7.19 g/100 g in NCP5); Ca, P, and S content (2,193.11, 481.21, and 313.77 ppm); and amino acid content with first limiting amino acids; histidine (0.89 mg/g), methionine (0.89 mg/g), and low content of hydrophobic amino acids (HAAs) may cause aggregation. NPC fortification enhanced physicochemical properties announced in enhanced viscosity (62. mP.s in NCP5) and heat stability (up to 200°C) compared with control skimmed milk (SM). NCP yoghurt fortification significantly increased protein content to 11 mg/100 g in T5, enhanced viscosity to 48.44 mP.s in T3, decreased syneresis to 16% in T5, and enhanced LAB viability which was translated in preferable sensorial properties. Applying fortification with nanoparticles of the casein-pectin (NCP) complex balanced the amino acid content and improved physicochemical, rheological, nutritional, and sensorial properties and LAB viability, which can be recommended further in functional food applications.

Dynamic Light Scattering and Its Application to Control Nanoparticle Aggregation in Colloidal Systems: A Review

Colloidal systems and their control play an essential role in daily human activities, but several drawbacks lead to an avoidance of their extensive application in some more productive areas. Some roadblocks are a lack of knowledge regarding how to influence and address colloidal forces, as well as a lack of practical devices to understand these systems. This review focuses on applying dynamic light scattering (DLS) as a powerful tool for monitoring and characterizing nanoparticle aggregation dynamics. We started by outlining the core ideas behind DLS and how it may be used to examine colloidal particle size distribution and aggregation dynamics; then, in the last section, we included the options to control aggregation in the chemically processed toner. In addition, we pinpointed knowledge gaps and difficulties that obstruct the use of DLS in real-world situations. Although widely used, DLS has limits when dealing with complicated systems, including combinations of nanoparticles, high concentrations, and non-spherical particles. We discussed these issues and offered possible solutions and the incorporation of supplementary characterization approaches. Finally, we emphasized how critical it is to close the gap between fundamental studies of nanoparticle aggregation and their translation into real-world applications, recognizing challenges in colloidal science.

Whey-pectin microcapsules improve the stability of grape marc phenolics during digestion

Grape marc (GM) is an agri-food residue from the wine industry valuable for its high content of phenolic compounds. This study aimed to develop an encapsulation system for GM extract (GME) using food-grade biopolymers resistant to gastric conditions for its potential use as a nutraceutical. For this purpose, a hydroalcoholic GME was prepared with a total phenolics content of 219.62 ± 11.50 mg gallic acid equivalents (GAE)/g dry extract and 1389.71 ± 97.33 µmol Trolox equivalents/g dry extract antioxidant capacity, assessed through ABTS (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) assay. Moreover, the extract effectively neutralized reactive oxygen species in Caco-2 cells, demonstrating an intracellular antioxidant capacity comparable to Trolox. The GME was encapsulated using whey protein isolate and pectin through nano spray drying (73% yield), resulting in spherical microparticles with an average size of 1 ± 0.5 µm and a polydispersity of 0.717. The encapsulation system protected the microcapsules from simulated gastrointestinal digestion (GID), where at the end of the intestinal phase, 82% of the initial phenolics were bioaccessible compared to 54% in the free GME. Besides, the encapsulated GME displayed a higher antioxidant activity by the ferric reducing antioxidant power assay than the free extract after GID. These results show the potential of this encapsulation system for applying GME as a nutraceutical with a high antioxidant capacity and protective effect against cellular oxidation.

Evaluation of amidated pectin as fat substitutes for minced chicken breast: Physicochemical properties and edible quality

An investigation was conducted to assess the gelation characteristics of amino acid amidated pectin and its subsequent influence on the quality of minced chicken breast (MCB) when employed as a lipid substitute. Through experimentation, it was evidenced that amidated pectin, such as glycine amidated pectin (AP@Gly), glutamic amidated pectin (AP@Glu), and lysine amidated pectin (AP@Lys), demonstrated superior viscosity and gelation capacity in comparison to their native pectin (PE) counterpart. In contrast to PE, amidated pectin samples exhibited the potential to form high-strength hydrogels under conditions of minimal restriction. Additionally, evaluations conducted on all samples established that MCB samples enriched with pectin and amidated pectin demonstrated superior water retention capability. Before thermal processing, MCB samples fortified with amidated pectin showcased higher hardness and L* values in comparison to PE and the control group. However, upon thermal processing, no significant divergence was found in the chroma and texture profile analysis (TPA) attributes across all MCB samples, and the electronic tongue sensory evaluation was closely aligned with the control group. This evidence substantiates the effectiveness of amidated pectin samples as viable lipid substitutes in MCB products.

Black garlic particles as a natural pigment and emulsifier in a Pickering emulsion based low fat innovative mayonnaise: Improved rheology and bioactivity

Black garlic is rich in brown pigments and Maillard reaction products are known for antioxidant activity and health promoting effects. In the present investigation, we report a facile strategy for fabricating low-fat innovative mayonnaise (IM) using black garlic particles (BGP) as a natural pigment, and a functional ingredient. Whey protein concentrate and high methoxyl pectin at optimized concentrations were utilized for fabricating an IM which served as a control. IM5 and IM10 were ternary composites constituting whey protein, high methoxyl pectin along with BGP (@5 and 10% respectively). The formulation IM10 (BGP @10%) showed high firmness and low spreadability quotient, hence IM5 was taken forward for fabrication for two more variants namely IM-J (using low methoxyl pectin (LMP) from jackfruit peels) and IM-C (LMP from citrus). The effect of BGP and LMP on the functional quality of IM was confirmed through zeta potential, antioxidant activity, textural, rheological, and microscopic evaluation. Fluorescence microscopy confirmed the presence of solid particles over the fat phase of IM, while interaction of pectin and whey proteins was demonstrated through fluorescence emission spectroscopy which clearly displayed stabilization of IM through the formation of Pickering emulsion. Pronounced difference in color and flavor score with BGP established high sensory scores in IM5, IM-J, and IM-C. Rheology supported the stabilizing effects of LMP in IM-J and IM-C in terms of speedy recovery of thixotropy, with recovering storage modulus (G'). Enhanced viscosity of IM-C and IM-J further corroborated the dual effect of LMP and BGP in improving emulsifying and functional quality of IM. Enhanced oxidative stability of IM was established by reduced peroxide and Totox values. Overall our results suggest the promising applications of black garlic as functional ingredient in protein and pectin based Pickering emulsions.

Pectin Hydrogels: Gel-Forming Behaviors, Mechanisms, and Food Applications

Pectin hydrogels have garnered significant attention in the food industry due to their remarkable versatility and promising properties. As a naturally occurring polysaccharide, pectin forms three-dimensional (3D) hydrophilic polymer networks, endowing these hydrogels with softness, flexibility, and biocompatibility. Their exceptional attributes surpass those of other biopolymer gels, exhibiting rapid gelation, higher melting points, and efficient carrier capabilities for flavoring and fat barriers. This review provides an overview of the current state of pectin gelling mechanisms and the classification of hydrogels, as well as their crosslinking types, as investigated through diverse research endeavors worldwide. The preparation of pectin hydrogels is categorized into specific gel types, including hydrogels, cryogels, aerogels, xerogels, and oleogels. Each preparation process is thoroughly discussed, shedding light on how it impacts the properties of pectin gels. Furthermore, the review delves into the various crosslinking methods used to form hydrogels, with a focus on physical, chemical, and interpenetrating polymer network (IPN) approaches. Understanding these crosslinking mechanisms is crucial to harnessing the full potential of pectin hydrogels for food-related applications. The review aims to provide valuable insights into the diverse applications of pectin hydrogels in the food industry, motivating further exploration to cater to consumer demands and advance food technology. By exploiting the unique properties of pectin hydrogels, food formulations can be enhanced with encapsulated bioactive substances, improved stability, and controlled release. Additionally, the exploration of different crosslinking methods expands the horizons of potential applications.

Physical modification of vegetable protein by extrusion and regulation mechanism of polysaccharide on the unique functional properties of extruded vegetable protein: a review

Development and utilization of high quality vegetable protein resources has become a hotspot. Food extrusion as a key technology can efficiently utilize vegetable protein. By changing the extrusion conditions, vegetable protein can obtain unique functional properties, which can meet the different needs of food processing. However, extrusion of single vegetable protein also exposes many disadvantages, such as low degree functional properties, poor quality stability and lower tissue fibrosis. Therefore, addition of polysaccharide has become a new development trend to compensate for the shortcomings of extruded vegetable protein. The unique functional properties of vegetable protein-polysaccharide conjugates (Maillard reaction products) can be achieved after extrusion due to regulation of polysaccharides and adjustment of extrusion parameters. However, the physicochemical changes caused by the intermolecular interactions between protein and polysaccharide during extrusion are complex, so control of these changes is still challenging, and further studies are needed. This review summarizes extrusion modification of vegetable proteins or polysaccharides. Next, the effect of different types of polysaccharides on vegetable proteins and its regulation mechanism during extrusion is mainly introduced, including the extrusion of starch polysaccharide-vegetable protein, and non-starch polysaccharide-vegetable protein. Finally, it also outlines the development perspectives of extruded vegetable protein-polysaccharide.

Plant-based meat analogs and fat substitutes, structuring technology and protein digestion: A review

There is currently an increasing trend in the consumption of meat analogs and fat substitutes due to the health hazards by excessive consumption of meat. Simulating the texture and mouthfeel of meat through structured plant-derived polymers has become a popular processing method. In this review, the mechanical structuring technology of plant polymers for completely replacing real meat is mainly introduced in this review, which mainly focuses on the parameters and principles of mechanical equipment for the production of vegan meat. The difference in composition between plant meat and real meat is mainly reflected in the protein, and particular attention should be paid to the digestive characteristics of plant meat protein in the gastrointestinal tract. Therefore, the differences in the protein digestibility properties of meat analogs and real meat is discussed in this review, focusing primarily on protein digestibility and peptide/amino acid composition of mechanically structured vegan meats. In terms of fat substitutes for meat products, the types of plant polymer colloidal systems used for meat fat substitutes is comprehensively introduced, including emulsion, hydrogel and oleogel.

Interaction of preheated whey protein isolate with rose anthocyanin extracts in beverage model system: Influence on color stability, astringency and mechanism

Preheating proteins have the potential to improve anthocyanin stability. Our aim was to investigate the effect of preheated whey protein isolate (WPI) on the color stability and astringency of the beverage model system in the presence of rose anthocyanin extracts (RAEs), and to explore the mechanism of interaction between preheated WPI and RAEs. The secondary structure, particle size and transparency of WPI were obviously changed by preheating. WPI preheated at 100°C  (WPI100) could effectively improve the color stability of RAEs in the beverage model system. Importantly, the WPI100-RAEs in the beverage model system exhibited the smallest particle size and the weakest astringency effect. In addition, different preheated WPIs could interact with RAEs non-covalently, and the interaction forces are hydrogen bonding and van der Waals forces, among which WPI100 had the strongest binding ability to RAEs. These results will provide a new insight into the development of protein-anthocyanin beverages.

Effect of different NaCl concentration on the structure-function relationship of citrus peel pectins modified by electrochemistry

In this study, the modified citrus peel pectins (CPPs) were successfully produced by electrochemistry with varying NaCl concentrations of 0, 0.01 % and 0.1 % w/v using an H-type cell at 40 mA current. After 4 h, the pH and oxidation-reduction potential (ORP) of oxidized CPP solution in the anodic region were 2.00- 2.52 and 371.17- 564.45 mV, respectively, due to the electrolysis of water, whereas those of reduced CPP solution in cathodic region were 9.46- 10.84 and - 202.77 ~ -230.57 mV. The modified CPPs in the anodic region (A-0, A-0.01, and A-0.1) exhibited significantly higher weight-average molecular weights and methyl esterification degrees than those in the cathodic region (C-0, C-0.01 and C-0.1). In contrast, the K⁺, Mg²⁺, and Ca²⁺ contents of A-0, A-0.01, and A-0.1 were lower than those of C-0, C-0.01 and C-0.1 due to the electrophoretic migration. Furthermore, the antioxidant activities of A-0 and A-0.01 solutions were stronger than those of the C-0, C-0.01, and C-0.1, while rheological and texture properties of their hydrogels showed contradictory results. Finally, the potential structure-function relationships of CPPs were explored by combining PCA and correlation analysis. Overall, this study introduced a potential approach for pectin purification and functional low-methoxyl pectin manufacturing.

Exploring the pH Sensitivity of Ion-Pair Interactions on a Self-Assembled Monolayer by Scanning Electrochemical Microscopy

Insights into the chemical essence of weak interactions on the surface of biomacromolecules may help to regulate biological processes. In this work, the pH sensitivity of ion-pair interactions occurring on a cysteine self-assembled monolayer (Cys SAM) that simulates the local surface of a protein was probed by scanning electrochemical microscopy (SECM). Cys SAM and the ion-pair interactions subsequently formed with the introduced aspartic acid (Asp) were both pH-sensitive, as confirmed by the tip current changes in the feedback mode. After continuous pH measurements, the most significant negative feedback was observed at pH 5.50, indicating the most robust ion-pair interactions, which were simultaneously identified by voltammetry. In this case, the extra addition of the inorganic cation (i.e., Ca²⁺) did not disrupt the existing ion-pair interactions, and the binding constant (K) and Gibbs free energy (ΔG^o) of the ion pair were finally determined to be 6.44 × 10⁵ M^-1 and -33.14 kJ mol^-1, respectively. Overall, the pH sensitivity of ion-pair interactions was found to be mainly attributable to pH-induced changes in the deprotonated/protonated states of the α-amino acid moieties, which may provide insights into the artificial manipulation of complex binding events at the molecular level on the biological surface.

Development of iron-vitamin multilayer encapsulates using 3 fluid nozzle spray drying

Considering the growing concern of iron and folic acid deficiency, encapsulation of these nutrients and fortification into foods is emerging as an effective counter-strategy. The present work focuses on a scalable approach for the production of iron, ascorbic acid, and folic acid core-shell encapsulates using novel 3-fluid nozzle (3FN) spray drying with whey protein as core and either pectin or hydroxypropyl methylcellulose (HPMC) as shell polymers. The effect of shell formation was observed by comparing core-shell encapsulates with conventional 2-fluid nozzle (2FN) encapsulates. Also, the effect of pH of whey protein on the color of encapsulates is noteworthy; reducing the pH to 4.0 significantly improved the lightness value (52.91 ± 0.13) when compared with the encapsulates with native pH (38.91 ± 0.58). Furthermore, sample with pectin as shell polymer exhibited fair flowability with lowest values of Hausner ratio (1.25 ± 0.04) and Carr's index (20.06 ± 2.71) and highest encapsulation efficiency for folic acid (86.07 ± 5.24%). Whereas, encapsulates having HPMC as shell polymer showed highest lightness value (60.80 ± 0.32) and highest encapsulation efficiency for iron (87.28 ± 4.15%). The formation of core-shell structure was confirmed by evaluation of the surface composition which showed reduced amine bonds and increased aliphatic and carbonyl bonds in the encapsulates prepared by 3FN spray drying. The encapsulates prepared without adjusting whey protein pH showed the least release (∼51 % in 24 h) and bioaccessibility (∼56%) of iron indicating the iron-whey protein complex formation. Based on appearance, smooth surface morphology, flowability, and release behavior, a combination of whey protein and pectin is recommended for co-encapsulation of iron, folic acid and ascorbic acid.

W/O/W emulsions stabilized with whey protein concentrate and pectin: Effects on storage, pasteurization, and gastrointestinal viability of Lacticaseibacillus rhamnosus

Probiotics have demonstrated various bioactive functions but poor storage and application stability, and encapsulation a promising method of increasing its viability. In this study, whey protein concentrate (WPC) and pectin (PEC) formed non-covalent complexes through electrostatic interaction at pH 3.0. The formed WPC-PEC complexes showed superior particle size, absolute potential, emulsification properties, and structural changes when PEC concentration was >0.8 % (w/v). This made them appropriate as a hydrophilic emulsifier to stabilize W/O/W emulsions. Then, Lacticaseibacillus rhamnosus, one representative of probiotics, was encapsulated in the internal aqueous phase of W/O/W emulsions. We obtained higher encapsulation efficiency (78.49 %) and smaller D_4,3 (9.72 μm) with 0.8 % (w/v) PEC concentration. Encapsulation of Lacticaseibacillus rhamnosus in W/O/W emulsions improved its viability under harsh conditions, including 28 days storage at 4 °C, simulated pasteurization, and simulated gastrointestinal digestion. W/O/W emulsions stabilized by WPC-PEC non-covalent complexes further improved the survival of Lacticaseibacillus rhamnosus against various adverse conditions as compared to WPC. These findings suggest that the studied W/O/W emulsions systems have the potential to deliver probiotics in food substrates to enhance their viability during production processing, storage transportation, and digestion.

Protein-Based Fat Replacers: A Focus on Fabrication Methods and Fat-Mimic Mechanisms

The increasing occurrence of obesity and other non-communicable diseases has shifted the human diet towards reduced calorie intake. This drives the market to develop low-fat/non-fat food products with limited deterioration of textural properties. Thus, developing high-quality fat replacers which can replicate the role of fat in the food matrix is essential. Among all the established types of fat replacers, protein-based ones have shown a higher compatibility with a wide range of foods with limited contribution to the total calories, including protein isolate/concentrate, microparticles, and microgels. The approach to fabricating fat replacers varies with their types, such as thermal-mechanical treatment, anti-solvent precipitation, enzymatic hydrolysis, complexation, and emulsification. Their detailed process is summarized in the present review with a focus on the latest findings. The fat-mimic mechanisms of fat replacers have received little attention compared to the fabricating methods; attempts are also made to explain the underlying principles of fat replacers from the physicochemical prospect. Finally, a future direction on the development of desirable fat replacers in a more sustainable way was also pointed out.

Antioxidant activity and interactions between whey protein and polysaccharides from different parts of Houttuynia cordata

Houttuynia cordata polysaccharides (PSY) are known to exhibit a variety of beneficial activities, but these are currently not specifically utilized in food. Hence, using the two edible parts of Houttuynia cordata, a herbaceous plant native to Southeast Asia, this study developed polysaccharides of a stem (HCPS)-whey protein concentrate (WPC) complex and a leaf (HCPL)-WPC complex, and studied their stability, structure and antioxidant activity. The results showed that stability differed in complexes with different proportions, exhibiting only relative stability in the two complexes in which the ratio of HCPS-WPC and HCPL-WPC was 1:4, but increased stability in the HCPL-WPC complex (ζ-potential of HCPL-WPC: | -21.87 mv| >ζ-potential of HCPS-WPC: | -21.70 mv|). Structural characterization showed that there was electrostatic interaction between HCPS and WPC and between HCPL and WPC. The HCPL-WPC was found to have better antioxidant activity. The findings of this study, thus, provide a reference for the development of Houttuynia cordata polysaccharide applications in food.

Liquid-liquid and liquid-solid separation in self-assembled chitosan-alginate and chitosan-pectin complexes

The complexation between two oppositely charged polyelectrolytes (PE) can lead liquid-liquid (complex coacervates, CC) or liquid-solid (solid precipitates, SP) phase separations. Herein, the effect of pH (2-11) and ionic strength (I, 0.05-1.0 M KCl) on the associative interactions between chitosan (QL)-alginate (SA) and QL-Pectin (Pec), polysaccharides widely used in biotechnology field, is described. pH and I, exhibited significant effect on the structure and phase transitions by modifying the ionization degree (α), pk_a, and associative interactions between PE. Onset of binding was established at pH_c 9, while continued acidification (pH_τ 5.8) led to simultaneous CC and SP exhibiting a maximum turbidity in both systems. At pH_δ 4.0, QL-Pec showed preferably CC structures whereas QL-SA maintained the CC and SP structures. At pH_ω 2, the associative interactions were suppressed due to the low ionization of Pec and SA. I (1.0 M) significantly diminished the interactions in QL-Pec due to charge screening. Molecular weight, second virial coefficient, hydrodynamic size, ionizable groups, and persistence length of polyion, influenced on the phase behavior of QL-Pec and QL-SA systems. Therefore, CC and SP are found simultaneously in both systems, their transitions can be modulated by intrinsic and environmental conditions, expanding the functional properties of complexed polysaccharides.