Fluorescent labelling in living cells

Targeted Biodegradable Near-Infrared Fluorescent Nanoparticles for Colorectal Cancer Imaging

Colorectal cancer (CRC) is the third leading cause of cancer death in the U.S., and early detection and diagnosis are essential for effective treatment. Current methods are inadequate for rapid detection of early disease, revealing flat lesions, and delineating tumor margins with accuracy and molecular specificity. Fluorescence endoscopy can generate wide field-of-view images enabling detection of CRC lesions and margins; increased signal intensity and improved signal-to-noise ratios can increase both speed and sensitivity of cancer detection. For this purpose, we developed targeted near-infrared (NIR) fluorescent silica nanoparticles (FSNs). We tuned their size to 50-200 nm and conjugated their surface with an antibody to carcinoembryonic antigen (CEA) to prepare CEA-FSNs. The physicochemical properties and biodegradable profiles of CEA-FSN were characterized, and molecular targeting was verified in culture using HT29 (CEA positive) and HCT116 (CEA negative) cells. CEA-FSNs bound to the HT29 cells to a greater extent than to the HCT116 cells, and smaller CEA-FSNs were internalized into HT29 cells more efficiently than larger CEA-FSNs. After intravenous administration of CEA-FSNs, a significantly greater signal was observed from the CEA-positive HT29 than the CEA-negative HCT116 tumors in xenografted mice. In F344-PIRC rats, polyps in the intestine were detected by white-light endoscopy, and NIR fluorescent signals were found in the excised intestinal tissue after topical application of CEA-FSNs. Immunofluorescence imaging of excised tissue sections demonstrated that the particle signals coregistered with signals for both CRC and CEA. These results indicate that CEA-FSNs have potential as a molecular imaging marker for early diagnosis of CRC.

Bioorthogonal Reactions in Bioimaging

Visualization of biomolecules in their native environment or imaging-aided understanding of more complex biomolecular processes are one of the focus areas of chemical biology research, which requires selective, often site-specific labeling of targets. This challenging task is effectively addressed by bioorthogonal chemistry tools in combination with advanced synthetic biology methods. Today, the smart combination of the elements of the bioorthogonal toolbox allows selective installation of multiple markers to selected targets, enabling multicolor or multimodal imaging of biomolecules. Furthermore, recent developments in bioorthogonally applicable probe design that meet the growing demands of superresolution microscopy enable more complex questions to be addressed. These novel, advanced probes enable highly sensitive, low-background, single- or multiphoton imaging of biological species and events in live organisms at resolutions comparable to the size of the biomolecule of interest. Herein, the latest developments in bioorthogonal fluorescent probe design and labeling schemes will be discussed in the context of in cellulo/in vivo (multicolor and/or superresolved) imaging schemes. The second part focuses on the importance of genetically engineered minimal bioorthogonal tags, with a particular interest in site-specific protein tagging applications to answer biological questions.

Smart and low-cost fluorometer for identifying breast cancer malignancy based on lipid droplets accumulation

The most common cause of breast cancer-related death is tumor recurrence. To develop more effective treatments, the identification of cancer cell specific malignancy indicators is therefore critical. Lipid droplets are known as an emerging hallmark in aggressive breast tumors. A common technique that can be used for observing molecules in cancer microenvironment is fluorescence microscopy. We describe the design, development and applicability of a smart fluorometer to detect lipid droplet accumulation based on the emitted fluorescence signals from highly malignant (MDA-MB-231) and mildly malignant (MCF7) breast cancer cell lines, that are stained with BODIPY dye. This device uses a visible-range light source as an excitation source and a spectral sensor as the detector. A commercial imaging system was used to examine the fluorescent cancer cell lines before being validated in a preclinical setting with the developed prototype. The outcomes indicate that this low-cost fluorometer can effectively detect the alterations levels of lipid droplets and hence distinguish between "moderately malignant" and "highly malignant" cancer cells. In comparison to prior research that used fluorescence spectroscopy techniques to detect cancer biomarkers, this study revealed enhanced capability in classifying mildly and highly malignant cancer cell lines.

Recent advances in Zn2+ imaging: From organelles to in vivo applications

Zn2+ is involved in various physiological and pathological processes in living systems. Monitoring the dynamic spatiotemporal changes of Zn2+ levels in organelles, cells, and in vivo is of great importance for the investigation of the physiological and pathological functions of Zn2+. However, this task is quite challenging since Zn2+ in living systems is present at low concentrations and undergoes rapid dynamic changes. In this review, we summarize the design and application of fluorescent probes for Zn2+ imaging in organelles, cells, and live organisms reported over the past two years. We aim to provide inspiration for the design of novel Zn2+ probes for multi-level monitoring and deepen the understanding of Zn2+ biology.

Recent progress of self-immobilizing and self-precipitating molecular fluorescent probes for higher-spatial-resolution imaging

Flourished in the past two decades, fluorescent probe technology provides researchers with accurate and efficient tools for in situ imaging of biomarkers in living cells and tissues and may play a significant role in clinical diagnosis and treatment such as biomarker detection, fluorescence imaging-guided surgery, and photothermal/photodynamic therapy. In situ imaging of biomarkers depends on the spatial resolution of molecular probes. Nevertheless, the majority of currently available molecular fluorescent probes suffer from the drawback of diffusing from the target region. This leads to a rapid attenuation of the fluorescent signal over time and a reduction in spatial resolution. Consequently, the diffused fluorescent signal cannot accurately reflect the in situ information of the target. Self-immobilizing and self-precipitating molecular fluorescent probes can be used to overcome this problem. These probes ensure that the fluorescent signal remains at the location where the signal is generated for a long time. In this review, we introduce the development history of the two types of probes and classify them in detail according to different design strategies. In addition, we compare their advantages and disadvantages, summarize some representative studies conducted in recent years, and propose prospects for this field.

Fluorescent Investigation of Proteins Using DNA-Synthetic Ligand Conjugates

The unfathomable role that fluorescence detection plays in the life sciences has prompted the development of countless fluorescent labels, sensors, and analytical techniques that can be used to detect and image proteins or investigate their properties. Motivated by the demand for simple-to-produce, modular, and versatile fluorescent tools to study proteins, many research groups have harnessed the advantages of oligodeoxynucleotides (ODNs) for scaffolding such probes. Tight control over the valency and position of protein binders and fluorescent dyes decorating the polynucleotide chain and the ability to predict molecular architectures through self-assembly, inherent solubility, and stability are, in a nutshell, the important properties of DNA probes. This paper reviews the progress in developing DNA-based, fluorescent sensors or labels that navigate toward their protein targets through small-molecule (SM) or peptide ligands. By describing the design, operating principles, and applications of such systems, we aim to highlight the versatility and modularity of this approach and the ability to use ODN-SM or ODN-peptide conjugates for various applications such as protein modification, labeling, and imaging, as well as for biomarker detection, protein surface characterization, and the investigation of multivalency.

Chemically programmable bacterial probes for the recognition of cell surface proteins

Common methods to label cell surface proteins (CSPs) involve the use of fluorescently modified antibodies (Abs) or small-molecule-based ligands. However, optimizing the labeling efficiency of such systems, for example, by modifying them with additional fluorophores or recognition elements, is challenging. Herein we show that effective labeling of CSPs overexpressed in cancer cells and tissues can be obtained with fluorescent probes based on chemically modified bacteria. The bacterial probes (B-probes) are generated by non-covalently linking a bacterial membrane protein to DNA duplexes appended with fluorophores and small-molecule binders of CSPs overexpressed in cancer cells. We show that B-probes are exceptionally simple to prepare and modify because they are generated from self-assembled and easily synthesized components, such as self-replicating bacterial scaffolds and DNA constructs that can be readily appended, at well-defined positions, with various types of dyes and CSP binders. This structural programmability enabled us to create B-probes that can label different types of cancer cells with distinct colors, as well as generate very bright B-probes in which the multiple dyes are spatially separated along the DNA scaffold to avoid self-quenching. This enhancement in the emission signal enabled us to label the cancer cells with greater sensitivity and follow the internalization of the B-probes into these cells. The potential to apply the design principles underlying B-probes in therapy or inhibitor screening is also discussed here.

Insights into heavy metals shock on anammox systems: Cell structure-based mechanisms and new challenges

Anaerobic ammonium oxidation (anammox) as a low-carbon and energy-saving technology, has shown unique advantages in the treatment of high ammonia wastewater. However, wastewater usually contains complex heavy metals (HMs), which pose a potential risk to the stable operation of the anammox system. This review systematically re-evaluates the HMs toxicity level from the inhibition effects and the inhibition recovery process, which can provide a new reference for engineering. From the perspective of anammox cell structure (extracellular, anammoxosome membrane, anammoxosome), the mechanism of HMs effects on cellular substances and metabolism is expounded. Furthermore, the challenges and research gaps for HMs inhibition in anammox research are also discussed. The clarification of material flow, energy flow and community succession under HMs shock will help further reveal the inhibition mechanism. The development of new recovery strategies such as bio-accelerators and bio-augmentation is conductive to breaking through the engineered limitations of HMs on anammox. This review provides a new perspective on the recognition of toxicity and mechanism of HMs in the anammox process, as well as the promotion of engineering applicability.

Application of spatial transcriptome technologies to neurological diseases

Spatial transcriptome technology acquires gene expression profiles while retaining spatial location information, it displays the gene expression properties of cells in situ. Through the investigation of cell heterogeneity, microenvironment, function, and cellular interactions, spatial transcriptome technology can deeply explore the pathogenic mechanisms of cell-type-specific responses and spatial localization in neurological diseases. The present article overviews spatial transcriptome technologies based on microdissection, in situ hybridization, in situ sequencing, in situ capture, and live cell labeling. Each technology is described along with its methods, detection throughput, spatial resolution, benefits, and drawbacks. Furthermore, their applications in neurodegenerative disease, neuropsychiatric illness, stroke and epilepsy are outlined. This information can be used to understand disease mechanisms, pick therapeutic targets, and establish biomarkers.

Quantitative Analysis and Optimization of Site-Specific Protein Bioconjugation in Mammalian Cells

Despite a range of covalent protein modifications, few techniques exist for quantification of protein bioconjugation in cells. Here, we describe a novel method for quantifying in cellulo protein bioconjugation through covalent bond formation with HaloTag. This approach utilizes unnatural amino acid (UAA) mutagenesis to selectively install a small and bioorthogonally reactive handle onto the surface of a protein. We utilized the fast kinetics and high selectivity of inverse electron-demand Diels-Alder cycloadditions to evaluate reactions of tetrazine phenylalanine (TetF) with strained trans-cyclooctene-chloroalkane (sTCO-CA) and trans-cyclooctene lysine (TCOK) with tetrazine-chloroalkane (Tet-CA). Following bioconjugation, the chloroalkane ligand is exposed for labeling by the HaloTag enzyme, allowing for straightforward quantification of bioconjugation via simple western blot analysis. We demonstrate the versatility of this tool for quickly and accurately determining the bioconjugation efficiency of different UAA/chloroalkane pairs and for different sites on different proteins of interest, including EGFP and the estrogen-related receptor ERRα.

Choosing the Probe for Single-Molecule Fluorescence Microscopy

Probe choice in single-molecule microscopy requires deeper evaluations than those adopted for less sensitive fluorescence microscopy studies. Indeed, fluorophore characteristics can alter or hide subtle phenomena observable at the single-molecule level, wasting the potential of the sophisticated instrumentation and algorithms developed for advanced single-molecule applications. There are different reasons for this, linked, e.g., to fluorophore aspecific interactions, brightness, photostability, blinking, and emission and excitation spectra. In particular, these spectra and the excitation source are interdependent, and the latter affects the autofluorescence of sample substrate, medium, and/or biological specimen. Here, we review these and other critical points for fluorophore selection in single-molecule microscopy. We also describe the possible kinds of fluorophores and the microscopy techniques based on single-molecule fluorescence. We explain the importance and impact of the various issues in fluorophore choice, and discuss how this can become more effective and decisive for increasingly demanding experiments in single- and multiple-color applications.

Affinity Bioorthogonal Chemistry (ABC) Tags for Site-Selective Conjugation, On-Resin Protein-Protein Coupling, and Purification of Protein Conjugates

The site-selective functionalization of proteins has broad application in chemical biology, but can be limited when mixtures result from incomplete conversion or the formation of protein containing side products. It is shown here that when proteins are covalently tagged with pyridyl-tetrazines, the nickel-iminodiacetate (Ni-IDA) resins commonly used for His-tags can be directly used for protein affinity purification. These Affinity Bioorthogonal Chemistry (ABC) tags serve a dual role by enabling affinity-based protein purification while maintaining rapid kinetics in bioorthogonal reactions. ABC-tagging works with a range of site-selective bioconjugation methods with proteins tagged at the C-terminus, N-terminus or at internal positions. ABC-tagged proteins can also be purified from complex mixtures including cell lysate. The combination of site-selective conjugation and clean-up with ABC-tagged proteins also allows for facile on-resin reactions to provide protein-protein conjugates.

Super-multiplexing excitation spectral microscopy with multiple fluorescence bands

Fluorescence microscopy, with high molecular specificity and selectivity, is a valuable tool for studying complex biological systems and processes. However, the ability to distinguish a large number of distinct subcellular structures in a single sample is impeded by the broad spectra of molecular fluorescence. We have recently shown that excitation spectral microscopy provides a powerful means to unmix up to six fluorophores in a single fluorescence band. Here, by working with multiple fluorescence bands, we extend this approach to the simultaneous imaging of up to ten targets, with the potential for further expansions. By covering the excitation/emission bandwidth across the full visible range, an ultra-broad 24-wavelength excitation scheme is established through frame-synchronized scanning of the excitation wavelength from a white lamp via an acousto-optic tunable filter (AOTF), so that full-frame excitation-spectral images are obtained every 24 camera frames, offering superior spectral information and multiplexing capability. With numerical simulations, we validate the concurrent imaging of 10 fluorophores spanning the visible range to achieve exceptionally low (∼0.5%) crosstalks. For cell imaging experiments, we demonstrate unambiguous identification of up to eight different intracellular structures labeled by common fluorophores of substantial spectral overlap with minimal color crosstalks. We thus showcase an easy-to-implement, cost-effective microscopy system for visualizing complex cellular components with more colors and lower crosstalks.

Approaches to investigating metabolism in human neurodevelopment using organoids: insights from intestinal and cancer studies

Interrogating the impact of metabolism during development is important for understanding cellular and tissue formation, organ and systemic homeostasis, and dysregulation in disease states. To evaluate the vital functions metabolism coordinates during human brain development and disease, pluripotent stem cell-derived models, such as organoids, provide tractable access to neurodevelopmental processes. Despite many strengths of neural organoid models, the extent of their replication of endogenous metabolic programs is currently unclear and requires direct investigation. Studies in intestinal and cancer organoids that functionally evaluate dynamic bioenergetic changes provide a framework that can be adapted for the study of neural metabolism. Validation of in vitro models remains a significant challenge; investigation using in vivo models and primary tissue samples is required to improve our in vitro model systems and, concomitantly, improve our understanding of human development.

In vivo tracking of individual stem cells labeled with nanowire lasers using multimodality imaging

Emerging cell-based regenerative medicine and stem cell therapies have drawn wide attention in medical research and clinical practice to treat tissue damage and numerous incurable diseases. In vivo observation of the distribution, migration, and development of the transplanted cells is important for both understanding the mechanism and evaluating the treatment efficacy and safety. However, tracking the 3D migration trajectories for individual therapeutic cells in clinically relevant pathological environments remains technically challenging. Using a laser photocoagulation model in living rabbit eyes, this study demonstrates a multimodality imaging technology integrating optical coherence tomography (OCT), fluorescence microscopy (FM), and lasing emission for in vivo longitudinal tracking of the 3D migration trajectories of individual human retinal pigment epithelium cells (ARPE-19) labeled with CdS nanowires. With unique lasing spectra generated from the subtle microcavity differences, the surface-modified nanowires perform as distinct spectral identifiers for labeling individual ARPE-19 cells. Meanwhile, with strong optical scattering and natural fluorescence emission, CdS nanowires also served as OCT and FM contrast agents to indicate the spatial locations of the transplanted ARPE-19 cells. A longitudinal study of tracking individual ARPE-19 cells in rabbit eyes over a duration of 28 days was accomplished. This method could potentially promote an understanding of the pharmacodynamics and pharmacokinetics of implanted cells in the development of cell-based therapies.

ABCB1 can actively pump-out the background-free tame fluorescent probe CO-1 from live cells

Cell labelling using a small fluorescent probe is an important technique in biomedical sciences. We previously developed a biocompatible and membrane-permeable probe, CO-1, which has low nonspecific binding affinity towards nontarget molecules. Although this background-free tame probe has been utilized for labelling of various intracellular biomolecules in live cells, the probes'  backgroung-free staining mechanism was not fully understood. Here, we propose that Gating-Oriented Live-cell Distinction (GOLD) mechanism occurs when ABCB1 transporter removes unbound CO-1 molecules from mammalian cells and, in a minor role, DIRC2 pumps CO-1 out from lysosomes. We also showed that solute carrier transporters were not involved in carrying CO-1 inside of cells. The role of reporters in assisting the probes' influx-efflux was analyzed by the combination of CRISPR library sceenings and inhibitors test. In summary, tame probe CO-1 cellular staining occurs in a dual mechanism where the probe moves freely through the cells membrane, but its washable property can be directly related to the action of ABCB1 transporter.

When light meets biology - how the specimen affects quantitative microscopy

Fluorescence microscopy images should not be treated as perfect representations of biology. Many factors within the biospecimen itself can drastically affect quantitative microscopy data. Whereas some sample-specific considerations, such as photobleaching and autofluorescence, are more commonly discussed, a holistic discussion of sample-related issues (which includes less-routine topics such as quenching, scattering and biological anisotropy) is required to appropriately guide life scientists through the subtleties inherent to bioimaging. Here, we consider how the interplay between light and a sample can cause common experimental pitfalls and unanticipated errors when drawing biological conclusions. Although some of these discrepancies can be minimized or controlled for, others require more pragmatic considerations when interpreting image data. Ultimately, the power lies in the hands of the experimenter. The goal of this Review is therefore to survey how biological samples can skew quantification and interpretation of microscopy data. Furthermore, we offer a perspective on how to manage many of these potential pitfalls.

Multiplexed Delivery of Synthetic (Un)Conjugatable Ubiquitin and SUMO2 Enables Simultaneous Monitoring of their Localization and Function in Live Cells

Ubiquitin (Ub) and its related small Ub like modifier (SUMO) are among the most influential protein post‐translational modifications in eukaryotes. Unfortunately, visualizing these modifications in live cells is a challenging task. Chemical protein synthesis offers great opportunities in studying and further understanding Ub and SUMO biology. Nevertheless, the low cell permeability of proteins limits these studies mainly for in vitro applications. Here, we introduce a multiplexed protein cell delivery approach, termed MBL (multiplexed bead loading), for simultaneous loading of up to four differentially labeled proteins with organic fluorophores. We applied MBL to visualize ubiquitination and SUMOylation events in live and untransfected cells without fluorescent protein tags or perturbation to their endogenous levels. Our study reveals unprecedented involvements of Ub and SUMO2 in lysosomes depending on conjugation states. We envision that this approach will improve our understanding of dynamic cellular processes such as formation and disassembly of membraneless organelles.

Fluorescently visualizing the penetration of anionic surfactants across cytoplasmic membrane and the subsequent damage on human cells

The extensive application of chemically synthesized anionic surfactants would cause serious pollution of water and increase health risk to humans. However, the adverse impact of anionic surfactant on human cells has never been systematically demonstrated. In this paper, a series of fluorescent anionic surfactants containing a varying length of alkyl chain from C8 to C18 and a fixed hydrophilic head of 8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt (HPTS) were synthesized and utilized for visualizing the interaction between surfactants and cells. The obtained molecules exhibited blue fluorescence presenting a decreasing fluorescent intensity with the increasing length of alkyl chain from C8 to C18 while showed the same sequence of HPTS-C16>HPTS-C18>HPTS-C12>HPTS-C8 on either surface activity, cellular adsorption, or cytotoxicity. In opposite, HPTS which contained no hydrophobic chain and thus exhibited no surface activity showed no cellular adsorption and cytotoxicity. It seems that the ligand of the appropriate chain length (C16) onto the hydrophilic HPTS molecules could cause the largest surface activity, the most distinguished cellular adsorption as well as the most adverse cytotoxicity. As reflected by the dynamic fluorescent visualization, the surfactant molecules of HPTS-C16 initially bound with cell membrane and entered into the intracellular lumen before finally localized at the endoplasmic reticulum (ER) and damaged it into a swollen structure. It is most likely that the structure of hydrophobic chain could determine the surface activities of surfactants and hence affect their cellular uptake and cytotoxicity. This study could help us to understand the adverse impact of anionic surfactant on human cells and its correlation with the surface activities or, in another word, the hydrophobic chain length.

A Quantification of Target Protein Biomarkers in Complex Media by Faradaic Shotgun Tagging

The progressive emergence of protein biomarkers promises a revolution in the healthcare industry and a shift of focus from disease management to much earlier intervention. Here, we introduce a facile shotgun tagging of ensemble proteins in clinically relevant media prior to specific target capture at antibody-modified electrodes. This facilitates a convenient voltammetric quantification of markers down to sub-pg/mL levels and across several orders of concentration. A translation of the methodology to an automated microfluidic platform enables marker quantification from 25 μL of sample in less than 15 min, demonstrated here with a simultaneous assaying of CRP and cardiac troponin I (cTnI). The assays show a good correlation with a standard immunoassay when applied to real patient serum samples. The platform is simple, generic, highly sensitive and requires no secondary labeling/binding or amplification.

Design and Synthesis of Porphyrin-Nitrilotriacetic Acid Dyads with Potential Applications in Peptide Labeling through Metallochelate Coupling

The need to detect and monitor biomolecules, especially within cells, has led to the emerging growth of fluorescent probes. One of the most commonly used labeling techniques for this purpose is reversible metallochelate coupling via a nitrilotriacetic acid (NTA) moiety. In this study, we focus on the synthesis and characterization of three new porphyrin-NTA dyads, TPP-Lys-NTA, TPP-CC-Lys-NTA, and Py ₃ P-Lys-NTA composed of a porphyrin derivative covalently connected with a modified nitrilotriacetic acid chelate ligand (NTA), for possible metallochelate coupling with Ni²⁺ ions and histidine sequences. Emission spectroscopy studies revealed that all of the probes are able to coordinate with Ni²⁺ ions and consequently can be applied as fluorophores in protein/peptide labeling applications. Using two different histidine-containing peptides as His₆-tag mimic, we demonstrated that the porphyrin-NTA hybrids are able to coordinate efficiently with the peptides through the metallochelate coupling process. Moving one step forward, we examined the ability of these porphyrin-peptide complexes to penetrate and accumulate in cancer cells, exploring the potential utilization of our system as anticancer agents.

A Bioorthogonal Double Fluorogenic Probe to Visualize Protein–DNA Interaction

Two sets of bioorthogonally applicable, double fluorogenic probes, capable of sensing DNA–protein interactions, were prepared by installing an azide or tetrazine motif onto structurally fluorogenic, DNA sensitive frames. Installation of these bioorthogonal functions onto DNA intercalating dyes furnished these scaffolds with reactivity based fluorogenicity, rendering these probes double-fluorogenic, AND-type logic switches that require the simultaneous occurrence of a bioorthogonal reaction and interaction with DNA to trigger high intensity fluorescence. The probes were evaluated for double fluorogenic behavior in the presence/absence of DNA and a complementary bioorthogonal function. Our studies revealed that azide and tetrazine appending thiazole orange frames show remarkable double fluorogenic features. One of these probes, a membrane permeable tetrazine modified thiazole orange derivative was further tested in live cell labeling studies. Cells expressing bioorthogonalized DNA-binding proteins showed intensive fluorescence characteristics of the localization of the proteins upon treatment with our double fluorogenic probe. On the contrary, labeling similarly bioorthogonalized cytosolic proteins did not result in the appearance of the fluorescence signal. These studies suggest that such double-fluorogenic probes are indeed capable of sensing DNA–protein interactions in cells.

Application oriented bioaugmentation processes: Mechanism, performance improvement and scale-up

Bioaugmentation is an optimization method with great potential to improve the treatment effect by introducing specific strains into the biological treatment system. In this study, a comprehensive review of the mechanism of bioaugmentation from the aspect of microbial community structure, the optimization methods facilitating application as well as feasible approaches of scale-up application has been provided. The different contribution of indigenous and exogenous strains was critically analyzed, the relationship between microbial community variation and system performance was clarified. Operation regulation and immobilization technologies are effective methods to deal with the possible failure of bioaugmentation. The gradual expansion from lab-scale, pilot scale to full-scale, the transformation and upgrading of wastewater treatment plants through the combination of direct dosing and biofilm, and the application of side-stream reactors are feasible ways to realize the full-scale application. The future challenges and prospects in this field were also proposed.

Synthesis, biological evaluation and cellular localization study of fluorescent derivatives of Jiyuan Oridonin A

Jiyuan Oridonin A (JOA) is a naturally occurring ent-kaurane diterpenoid that exhibits significant potential in the field of anti-tumor drug development. However, its detailed anti-cancer mechanism of action has not been fully understood. In order to investigate its anticancer mode of action, two series of novel fluorescent derivatives of JOA conjugated with naphthalimide dyes were synthesized, and their antitumor activity against five selected cancer cell lines (MGC-803, SW1990, PC-3, TE-1 and HGC-27) was evaluated. Compared with JOA, the anti-tumor activity of the vast majority of compounds were improved. Among them, B12 exhibited promising anti-proliferative activity against HGC-27 cells with IC₅₀ value of 0.39 ± 0.09 μM. Fluorescence imaging studies demonstrated that probe B12 could enter HGC-27 cells in a dose-dependent and time-dependent manner and was mainly accumulated in mitochondria. Preliminary biological mechanism studies indicated that B12 was able to inhibit cell cloning and migration. Further studies suggested that B12-induced apoptosis was related to the mitochondrial pathway. Overall, our results provide new approaches to explore the molecular mechanism of the natural product JOA, which would contribute to its further development as an antitumor agent.

Site-Specific Labeling of Endogenous Proteins Using CoLDR Chemistry

Chemical modifications of native proteins can affect their stability, activity, interactions, localization, and more. However, there are few nongenetic methods for the installation of chemical modifications at a specific protein site in cells. Here we report a covalent ligand directed release (CoLDR) site-specific labeling strategy, which enables the installation of a variety of functional tags on a target protein while releasing the directing ligand. Using this approach, we were able to label various proteins such as BTK, K-Ras^G12C, and SARS-CoV-2 PL^pro with different tags. For BTK we have shown selective labeling in cells of both alkyne and fluorophores tags. Protein labeling by traditional affinity methods often inhibits protein activity since the directing ligand permanently occupies the target binding pocket. We have shown that using CoLDR chemistry, modification of BTK by these probes in cells preserves its activity. We demonstrated several applications for this approach including determining the half-life of BTK in its native environment with minimal perturbation, as well as quantification of BTK degradation by a noncovalent proteolysis targeting chimera (PROTAC) by in-gel fluorescence. Using an environment-sensitive “turn-on” fluorescent probe, we were able to monitor ligand binding to the active site of BTK. Finally, we have demonstrated efficient CoLDR-based BTK PROTACs (DC₅₀ < 100 nM), which installed a CRBN binder onto BTK. This approach joins very few available labeling strategies that maintain the target protein activity and thus makes an important addition to the toolbox of chemical biology.

Phosphate-Based Self-Immolative Linkers for Tuneable Double Cargo Release

Phosphorus-based self-immolative (SI) linkers offer a wide range of applications, such as smart materials and drug-delivery systems. Phosphorus SI linkers are ideal candidates for double-cargo delivery platforms because they have a higher valency than carbon. A series of substituted phosphate linkers was designed for releasing two phenolic cargos through SI followed by chemical hydrolysis. Suitable modifications of the lactate spacer increased the cargo release rate significantly, from 1 day to 2 hours or 5 minutes, as shown for linkers containing p-fluoro phenol. In turn, double cargo linkers bearing p-methyl phenol released their cargo more slowly (4 days, 4 hours, and 15 minutes) than their p-fluoro analogues. The α-hydroxyisobutyrate linker released both cargos in 25 minutes. Our study expands the current portfolio of SI constructs by providing a double cargo delivery option, which is crucial to develop universal SI platforms.

Insights on the emerging biotechnology of histidine-rich peptides

In the late 70's, the discovery of the restriction enzymes made possible the biological production of functional proteins by recombinant DNA technologies, a fact that largely empowered both biotechnological and pharmaceutical industries. Short peptides or small protein domains, with specific molecular affinities, were developed as purification tags in downstream processes to separate the target protein from the culture media or cell debris, upon breaking the producing cells. Among these tags, and by exploiting the interactivity of the imidazole ring of histidine residues, the hexahistidine peptide (H6) became a gold standard. Although initially used almost exclusively in protein production, H6 and related His-rich peptides are progressively proving a broad applicability in novel utilities including enzymatic processes, advanced drug delivery systems and diagnosis, through a so far unsuspected adaptation of their binding capabilities. In this context, the coordination of histidine residues and metals confers intriguing functionalities to His-rich sequences useable in the forward-thinking design of protein-based nano- and micro-materials and devices, through strategies that are comprehensively presented here.

Orthogonal coiled coils enable rapid covalent labelling of two distinct membrane proteins with peptide nucleic acid barcodes

Templated chemistry offers the prospect of addressing specificity challenges occurring in bioconjugation reactions. Here, we show two peptide-templated amide-bond forming reactions that enable the concurrent labelling of two different membrane proteins with two different peptide nucleic acid (PNA) barcodes. The reaction system is based on the mutually selective coiled coil interaction between two thioester-linked PNA–peptide conjugates and two cysteine peptides serving as genetically encoded peptide tags. Orthogonal coiled coil templated covalent labelling is highly specific, quantitative and proceeds within a minute. To demonstrate the usefulness, we evaluated receptor internalisation of two membranous receptors EGFR (epidermal growth factor) and ErbB2 (epidermal growth factor receptor 2) by first staining PNA-tagged proteins with fluorophore–DNA conjugates and then erasing signals from non-internalized receptors via toehold-mediated strand displacement.

A pair of orthogonal coiled coils templates highly specific live cell bioconjugation of two different proteins. PNA tagging and hybridisation with fluorophore–DNA reporters enables rapid dual receptor internalisation analysis of EGFR and ErbB2.

Cell-Permeable Nanobodies Allow Dual-Color Super-Resolution Microscopy in Untransfected Living Cells

Super‐resolution microscopy in living cells can be restricted by the availability of small molecule probes, which only exist against few targets and genetically encoded tags. Here, we expand the applicability of live‐cell STED by engineering cell‐permeable and highly fluorescent nanobodies as intracellular targeting agents. To ensure bright fluorescent signals at low concentrations we used the concept of intramolecular photostabilization by ligating a fluorophore along with the photostabilizer trolox to the nanobody using expressed protein ligation (EPL). Furthermore, these semi‐synthetic nanobodies are equipped with a cleavable cell‐penetrating peptide for efficient cellular entry, which enables super‐resolution imaging of GFP and mCherry, as well as two endogenous targets, nuclear lamins and the DNA replication and repair protein PCNA. We monitored cell division and DNA replication via confocal and STED microscopy thus demonstrating the utility of these new intracellular tools for functional analysis.

Monomethine cyanine probes for visualization of cellular RNA by fluorescence microscopy

We have studied spectral-luminescent properties of the monomethine cyanine dyes both in their free states and in the presence of either double-stranded deoxyribonucleic acids (dsDNAs) or single-stranded ribonucleic acids (RNAs). The dyes possess low fluorescence intensity in an unbound state, which is increased up to 479 times in the presence of the nucleic acids. In the presence of RNAs, the fluorescence intensity increase was stronger than that observed in the presence of dsDNA. Next, we have performed staining of live and fixed cells by all prepared dyes. The dyes proved to be cell and nuclear membrane permeant. They are photostable and brightly stain RNA-containing organelles in both live and fixed cells. The colocalization confirmed the specific nucleoli staining with anti-Ki-67 antibodies. The RNA digestion experiment has confirmed the selectivity of the dyes toward intracellular RNA. Based on the obtained results, we can conclude that the investigated monomethine cyanine dyes are useful fluorescent probes for the visualization of intracellular RNA and RNA-containing organelles such as nucleoli by using fluorescence microscopy.

Multi-label in vivo STED microscopy by parallelized switching of reversibly switchable fluorescent proteins

Despite the tremendous success of super-resolution microscopy, multi-color in vivo applications are still rare. Here we present live-cell multi-label STED microscopy in vivo and in vitro by combining spectrally separated excitation and detection with temporal sequential imaging of reversibly switchable fluorescent proteins (RSFPs). Triple-label STED microscopy resolves pre- and postsynaptic nano-organizations in vivo in mouse visual cortex employing EGFP, Citrine, and the RSFP rsEGP2. Combining the positive and negative switching RSFPs Padron and Dronpa-M159T enables dual-label STED microscopy. All labels are recorded quasi-simultaneously by parallelized on- and off-switching of the RSFPs within the fast-scanning axis. Depletion is performed by a single STED beam so that all channels automatically co-align. Such an addition of a second or third marker merely requires a switching laser, minimizing setup complexity. Our technique enhances in vivo STED microscopy, making it a powerful tool for studying multiple synaptic nano-organizations or the tripartite synapse in vivo.

Strategies for Site-Specific Labeling of Receptor Proteins on the Surfaces of Living Cells by Using Genetically Encoded Peptide Tags

Fluorescence microscopy imaging enables receptor proteins to be investigated within their biological context. A key challenge is to site-specifically incorporate reporter moieties into proteins without interfering with biological functions or cellular networks. Small peptide tags offer the opportunity to combine inducible labeling with small tag sizes that avoid receptor perturbation. Herein, we review the current state of live-cell labeling of peptide-tagged cell-surface proteins. Considering their importance as targets in medicinal chemistry, we focus on membrane receptors such as G protein-coupled receptors (GPCRs) and receptor tyrosine kinases (RTKs). We discuss peptide tags that i) are subject to enzyme-mediated modification reactions, ii) guide the complementation of reporter proteins, iii) form coiled-coil complexes, and iv) interact with metal complexes. Given our own contributions in the field, we place emphasis on peptide-templated labeling chemistry.

Genetically encoded RNA nanodevices for cellular imaging and regulation

Nucleic acid-based nanodevices have been widely used in the fields of biosensing and nanomedicine. Traditionally, the majority of these nanodevices were first constructed in vitro using synthetic DNA or RNA oligonucleotides and then delivered into cells. Nowadays, the emergence of genetically encoded RNA nanodevices has provided a promising alternative approach for intracellular analysis and regulation. These genetically encoded RNA-based nanodevices can be directly transcribed and continuously produced inside living cells. A variety of highly precise and programmable nanodevices have been constructed in this way during the last decade. In this review, we will summarize the recent advances in the design and function of these artificial genetically encoded RNA nanodevices. In particular, we will focus on their applications in regulating cellular gene expression, imaging, logic operation, structural biology, and optogenetics. We believe these versatile RNA-based nanodevices will be broadly used in the near future to probe and program cells and other biological systems.

Using a safe and effective fixative to improve the immunofluorescence staining of bacteria

The emerging and development of green chemistry has once again drawn the researchers' attention to eliminating the use and generation of hazardous materials. Here we report the use of a safe and effective fixative, chlorine dioxide (ClO₂), instead of traditional hazardous fixatives for the cross-linking of cellular proteins to improve immunofluorescence staining of bacteria. The concentration of ClO₂needed for 100% fixation is 50μg ml^-1, which is much lower than that of traditional fixatives (1000-10000μg ml^-1). The ClO₂mediated cross-linking can preserve the integrity of bacterial cells and prevent cell loss through lysis. Meanwhile, lysozyme can permeabilize the bacterial cells, allowing the labelled antibodies to diffuse to their intracellular target molecules. By usingE. coliO157:H7/RP4 as a gram-negative bacteria model, immunofluorescence staining assays for both intracellular protein and surface polysaccharide were carried out to investigate the effect of ClO₂fixation on the staining. The results demonstrated that ClO₂fixation could prevent the target antigens from cracking off the bacteria without damage on the interaction between the antibodies and antigens (either for polysaccharide or protein). As a safe and effective fixative, ClO₂has potential practical applications in immunofluorescence staining and fluorescencein situhybridization for single bacteria/cell analysis.

Genetically encoded light-up RNA aptamers and their applications for imaging and biosensing

Intracellular small ligands and biomacromolecules are playing crucial roles not only as executors but also as regulators. It is essential to develop tools to investigate their dynamics to interrogate their functions and reflect the cellular status. Light-up RNA aptamers are RNA sequences that can bind with their cognate nonfluorescent fluorogens and greatly activate their fluorescence. The emergence of genetically encoded light-up RNA aptamers has provided fascinating tools for studying intracellular small ligands and biomacromolecules owing to their high fluorescence activation degree and facile programmability. Here we review the burgeoning field of light-up RNA aptamers. We first briefly introduce light-up RNA aptamers with a focus on the photophysical properties of the fluorogens. Then design strategies of genetically encoded light-up RNA aptamer based sensors including turn-on, signal amplification and ratiometric rationales are emphasized.

Choosing Fluorescent Probes and Labeling Systems

Fluorescence microscopy is advantageous for investigating biological processes and mechanisms in living cells. One of the most important considerations when designing an experiment is the selection of an appropriate fluorescent probe. Equally important is deciding how the probe will be attached to the protein of interest. The advantages and disadvantages of different fluorescent probe types and their respective labeling methods are discussed to provide an overview on selecting appropriate fluorophores and labeling systems for fluorescence-based assays. Protocols are outlined when appropriate.

Hypothesis-driven quantitative fluorescence microscopy - the importance of reverse-thinking in experimental design

One of the challenges in modern fluorescence microscopy is to reconcile the conventional utilization of microscopes as exploratory instruments with their emerging and rapidly expanding role as a quantitative tools. The contribution of microscopy to observational biology will remain enormous owing to the improvements in acquisition speed, imaging depth, resolution and biocompatibility of modern imaging instruments. However, the use of fluorescence microscopy to facilitate the quantitative measurements necessary to challenge hypotheses is a relatively recent concept, made possible by advanced optics, functional imaging probes and rapidly increasing computational power. We argue here that to fully leverage the rapidly evolving application of microscopes in hypothesis-driven biology, we not only need to ensure that images are acquired quantitatively but must also re-evaluate how microscopy-based experiments are designed. In this Opinion, we present a reverse logic that guides the design of quantitative fluorescence microscopy experiments. This unique approach starts from identifying the results that would quantitatively inform the hypothesis and map the process backward to microscope selection. This ensures that the quantitative aspects of testing the hypothesis remain the central focus of the entire experimental design.

Dual-Functionalisation of Fluorophores for the Preparation of Targeted and Selective Probes

A key current challenge in biological research is the elucidation of the that roles chemicals and chemical reactions play in cellular function and dysfunction. Of the available cellular imaging techniques, fluorescence imaging offers a balance between sensitivity and resolution, enabling the cost-effective and rapid visualisation of model biological systems. Importantly, the use of responsive fluorescent probes in conjunction with ever-advancing microscopy and flow cytometry techniques enables the visualisation, with high spatiotemporal resolution, of both specific chemical species and chemical reactions in living cells. Ideal responsive fluorescent probes are those that contain a fluorophore tethered to both a sensing unit, to ensure selectivity of response, and a targeting group, to control the sub-cellular localisation of the probe. To date, probes that are both targeted and selective are relatively rare and most localised probes are discovered serendipitously rather than by design. A challenge in this field is therefore the identification of suitable fluorophore scaffolds that can be readily attached to both sensing and targeting groups. Here we review current strategies for dual-functionalisation of fluorophores, highlighting key examples of targeted, responsive probes.

Selective modification of sulfamidate-containing peptides

Hybrid peptides whose N-terminal residues are activated in the form of α-methylisoserine-derived cyclic sulfamidates exhibit rich reactivity as electrophiles, allowing site- and stereoselective modifications at different backbone and side chain positions. The unique properties of this scaffold allow the stereocontrolled late-stage functionalization of the peptide backbone by nucleophilic ring opening with fluorescent probes, thiocarbohydrates and tags for strain-promoted azide-alkyne cycloaddition as well as by installing labile N-terminal affinity tags (biotin) and cytotoxic drugs (chlorambucil) for pH-controlled release. Finally, an unexpected base-promoted acyl group migration from the sulfamidate N-terminus allows fast and quantitative intramolecular modification of nucleophilic side chains on the fully unprotected peptides.

Live-cell protein engineering with an ultra-short split intein

Split inteins are privileged molecular scaffolds for the chemical modification of proteins. Though efficient for in vitro applications, these polypeptide ligases have not been utilized for the semisynthesis of proteins in live cells. Here, we biochemically and structurally characterize the naturally split intein VidaL. We show that this split intein, which features the shortest known N-terminal fragment, supports rapid and efficient protein trans-splicing under a range of conditions, enabling semisynthesis of modified proteins both in vitro and in mammalian cells. The utility of this protein engineering system is illustrated through the traceless assembly of multidomain proteins whose biophysical properties render them incompatible with a single expression system, as well as by the semisynthesis of dual posttranslationally modified histone proteins in live cells. We also exploit the domain swapping function of VidaL to effect simultaneous modification and translocation of the nuclear protein HP1α in live cells. Collectively, our studies highlight the VidaL system as a tool for the precise chemical modification of cellular proteins with spatial and temporal control.

Engineering Orthogonal, Plasma Membrane-Specific SLIPT Systems for Multiplexed Chemical Control of Signaling Pathways in Living Single Cells

Most cell behaviors are the outcome of processing information from multiple signals generated upon cell stimulation. Thus, a systematic understanding of cellular systems requires methods that allow the activation of more than one specific signaling molecule or pathway within a cell. However, the construction of tools suitable for such multiplexed signal control remains challenging. In this work, we aimed to develop a platform for chemically manipulating multiple signaling molecules/pathways in living mammalian cells based on self-localizing ligand-induced protein translocation (SLIPT). SLIPT is an emerging chemogenetic tool that controls protein localization and cell signaling using synthetic self-localizing ligands (SLs). Focusing on the inner leaflet of the plasma membrane (PM), where there is a hub of intracellular signaling networks, here we present the design and engineering of two new PM-specific SLIPT systems based on an orthogonal eDHFR and SNAP-tag pair. These systems rapidly induce translocation of eDHFR- and SNAP-tag-fusion proteins from the cytoplasm to the PM specifically in a time scale of minutes upon addition of the corresponding SL. We then show that the combined use of the two systems enables chemically inducible, individual translocation of two distinct proteins in the same cell. Finally, by integrating the orthogonal SLIPT systems with fluorescent reporters, we demonstrate simultaneous multiplexed activation and fluorescence imaging of endogenous ERK and Akt activities in a single cell. Collectively, orthogonal PM-specific SLIPT systems provide a powerful new platform for multiplexed chemical signal control in living single cells, offering new opportunities for dissecting cell signaling networks and synthetic cell manipulation.

A Fluorescence-Based Wireless Capsule Endoscopy System for Detecting Colorectal Cancer

Wireless capsule endoscopy (WCE) has been widely used in gastrointestinal (GI) diagnosis that allows the physicians to examine the interior wall of the human GI tract through a pain-free procedure. However, there are still several limitations of the technology, which limits its functionality, ultimately limiting its wide acceptance. Its counterpart, the wired endoscopic system is a painful procedure that demotivates patients from going through the procedure, and adversely affects early diagnosis. Furthermore, the current generation of capsules is unable to automate the detection of abnormality. As a result, physicians are required to spend longer hours to examine each image from the endoscopic capsule for abnormalities, which makes this technology tiresome and error-prone. Early detection of cancer is important to improve the survival rate in patients with colorectal cancer. Hence, a fluorescence-imaging-based endoscopic capsule that automates the detection process of colorectal cancer was designed and developed in our lab. The proof of concept of this endoscopic capsule was tested on porcine intestine and liquid phantom. The proposed WCE system offers great possibilities for future applicability in selective and specific detection of other fluorescently labelled cancers.

Synthesis and Structural Optimization of Iridium(III) Solvent Complex for Electrochemiluminescence Labeling of Histidine-Rich Protein and Immunoassay Applications for CRP Detection

The reaction between an iridium(III) solvent complex and the histidine site of biomolecules as one kind of novel bioconjugation approaches has received much attention during the past few years. To extend this novel bioconjugation approach into electrochemiluminescence (ECL) immunoassay and optimize the performances, three iridium(III) solvent complexes with different C^∧N bidentate main ligands have been designed and synthesized in this work. Bovine serum albumin (BSA) as the standard histidine-rich protein is initially employed to evaluate the labeling performances by comparing the ECL intensity of the same amount of BSA labeled by different iridium(III) solvent complexes. Importantly, a magnetic beads-based sandwich immunoassay platform using Ir-dmpq (iridium(III) acetonitrile complex with 2-(3,5-dimethylphenyl)quinoline as the main ligand) as a structurally optimized labeling agent has been successfully constructed to detect C-reactive protein (CRP, an important biomarker of systemic inflammation in clinic), and the limit of detection based on this novel labeling agent could reach below 1 ng/mL, which may further pave the way for applications of the iridium(III) solvent complex in histidine-rich protein ECL labeling beyond fluorescence labeling.

Optimized aqueous Kinugasa reactions for bioorthogonal chemistry applications

Kinugasa reactions hold potential for bioorthogonal chemistry in that the reagents can be biocompatible. Unlike other bioorthogonal reaction products, β-lactams are potentially reactive, which can be useful for synthesizing new biomaterials. A limiting factor for applications consists of slow reaction rates. Herein, we report an optimized aqueous copper(i)-catalyzed alkyne-nitrone cycloaddition involving rearrangement (CuANCR) with rate accelerations made possible by the use of surfactant micelles. We have investigated the factors that accelerate the aqueous CuANCR reaction and demonstrate enhanced modification of a model membrane-associated peptide. We discovered that lipids/surfactants and alkyne structure have a significant impact on the reaction rate, with biological lipids and electron-poor alkynes showing greater reactivity. These new findings have implications for the use of CuANCR for modifying integral membrane proteins as well as live cell labelling and other bioorthogonal applications.

A chemical covalent tactic for bio-thiol sensing and protein labeling agent design

A chemical covalent tactic was developed for bio-thiol sensing and protein labeling agent design by the installation of a sulfoxide scaffold onto the skeleton of various fluorophores.

Predicting reactivity for bioorthogonal cycloadditions involving nitrones

Nitrones are useful dipoles in both synthesis and in bioorthogonal transformations to report on biological phenomena. In bioorthogonal reactions, nitrones are both small and relatively easy to incorporate into biomolecules, while providing versatility in their ability to harbor different substituents that tune their reactivity. Herein, we examine the reactivities of some common and useful nitrone cycloadditions using density functional theory (DFT) and the distortion/interaction (D/I) model. The data show that relative reactivities can be predicted using these approaches, and useful insights gained further enchancing reactivities of both nitrones and their dipolarophile reaction partners. We find that D/I is a useful guide to understanding and predicting reactivities of cycloadditions involving nitrones.

Nitrones are useful dipoles in both synthesis and in bioorthogonal transformations to report on biological phenomena.

Electron Microscopic Detection of Single Membrane Proteins by a Specific Chemical Labeling

Electron microscopy (EM) is a technology that enables visualization of single proteins at a nanometer resolution. However, current protein analysis by EM mainly relies on immunolabeling with gold-particle-conjugated antibodies, which is compromised by large size of antibody, precluding precise detection of protein location in biological samples. Here, we develop a specific chemical labeling method for EM detection of proteins at single-molecular level. Rational design of α-helical peptide tag and probe structure provided a complementary reaction pair that enabled specific cysteine conjugation of the tag. The developed chemical labeling with gold-nanoparticle-conjugated probe showed significantly higher labeling efficiency and detectability of high-density clusters of tag-fused G protein-coupled receptors in freeze-fracture replicas compared with immunogold labeling. Furthermore, in ultrathin sections, the spatial resolution of the chemical labeling was significantly higher than that of antibody-mediated labeling. These results demonstrate substantial advantages of the chemical labeling approach for single protein visualization by EM.