Formate dehydrogenases for CO2 utilization

Substrate-dependent oxidative inactivation of a W-dependent formate dehydrogenase involving selenocysteine displacement

Metal-dependent formate dehydrogenases are very promising targets for enzyme optimization and design of bio-inspired catalysts for CO2 reduction, towards innovative strategies for climate change mitigation. For effective application of these enzymes, the catalytic mechanism must be better understood, and the molecular determinants clarified. Despite numerous studies, several doubts persist, namely regarding the role played by the possible dissociation of the SeCys ligand from the Mo/W active site. Additionally, the oxygen sensitivity of these enzymes must also be understood as it poses an important obstacle for biotechnological applications. This work presents a combined biochemical, spectroscopic, and structural characterization of Desulfovibrio vulgaris FdhAB (DvFdhAB) when exposed to oxygen in the presence of a substrate (formate or CO2). This study reveals that O2 inactivation is promoted by the presence of either substrate and involves forming a different species in the active site, captured in the crystal structures, where the SeCys ligand is displaced from tungsten coordination and replaced by a dioxygen or peroxide molecule. This form was reproducibly obtained and supports the conclusion that, although W-DvFdhAB can catalyse the oxidation of formate in the presence of oxygen for some minutes, it gets irreversibly inactivated after prolonged O2 exposure in the presence of either substrate.

Electrocatalysis of CO2 Reduction by Immobilized Formate Dehydrogenase without a Metal Redox Center

Nicotinamide adenine dinucleotide-dependent formate dehydrogenase from Candida boidinii was immobilized in a 1,2-dimyristoyl-sn-glycero-3-phosphocholine/cholesterol floating lipid bilayer on the gold surface as a biocatalyst for electrochemical CO2 reduction. We report that, in contrast to common belief, the enzyme can catalyze the electrochemical reduction of CO2 to formate without the cofactor protonated nicotinamide adenine dinucleotide. The electrochemical data indicate that the enzyme-catalyzed reduction of CO2 is diffusion-controlled and is a reversible reaction. The orientation and conformation of the enzyme were investigated by surface-enhanced infrared reflection absorption spectroscopy. The α-helix of the enzyme adopts an orientation nearly parallel to the surface, bringing its active center close to the gold surface. This orientation allows direct electron transfer between CO2 and the gold electrode. The results in this paper provide a new method for the development of enzymatic electrocatalysts for CO2 reduction.

Medium Chain Length Polyhydroxyalkanoate Production by Engineered Pseudomonas gessardii Using Acetate-formate as Carbon Sources

Production of medium chain length polyhydroxyalkanoate (mcl-PHA) was attempted using Pseudomonas gessardii NIBRBAC000509957, which was isolated from Sunchang, Jeollabuk-do, Republic of Korea (35°24'27.7"N, 127°09'13.0"E) and effectively utilized acetate and formate as carbon sources. We first evaluated the utilization of acetate as a carbon source, revealing optimal growth at 5 g/L acetate. Then, formate was supplied to the acetate minimal medium as a carbon source to enhance cell growth. After overexpressing the acetate and formate assimilation pathway enzymes, this strain grew at a significantly higher rate in the medium. As this strain naturally produces PHA, it was further engineered metabolically to enhance mcl-PHA production. The engineered strain produced 0.40 g/L of mcl-PHA with a biomass content of 30.43% in fed-batch fermentation. Overall, this strain can be further developed to convert acetate and formate into valuable products.

Systems metabolic engineering of Corynebacterium glutamicum to assimilate formic acid for biomass accumulation and succinic acid production

Formate as an ideal mediator between the physicochemical and biological realms can be obtained from electrochemical reduction of CO2 and used to produce bio-chemicals. Yet, limitations arise when employing natural formate-utilizing microorganisms due to restricted product range and low biomass yield. This study presents a breakthrough: engineered Corynebacterium glutamicum strains (L2-L4) through modular engineering. L2 incorporates the formate-tetrahydrofolate cycle and reverse glycine cleavage pathway, L3 enhances NAD(P)H regeneration, and L4 reinforces metabolic flux. Metabolic modeling elucidates C1 assimilation, guiding strain optimization for co-fermentation of formate and glucose. Strain L4 achieves an OD600 of 0.5 and produces 0.6 g/L succinic acid. 13C-labeled formate confirms C1 assimilation, and further laboratory evolution yields 1.3 g/L succinic acid. This study showcases a successful model for biologically assimilating formate in C. glutamicum that could be applied in C1-based biotechnological production, ultimately forming a formate-based bioeconomy.

Substrate Promiscuity of Thermoplasma acidophilum Malic Enzyme for CO2 Fixation Reaction

CO2 fixation technology has gained attention as a method to effectively utilize the abundant CO2 in the atmosphere by converting it into useful chemicals. However, since CO2 is a highly stable molecule, many of the currently developed methods for chemical CO2 fixation require harsh conditions and reactive reagents. The establishment of efficient and sustainable processes is eagerly awaited. In this study, we investigated a biocatalytic process and achieved a carboxylation reaction under mild conditions (37 °C, 0.1 MPa CO2) using a biocatalyst, Thermoplasma acidophilum NADP+-malic enzyme (TaME), and gaseous CO2 by coupling enzymatic coenzyme regeneration. We also demonstrated for the first time that the carboxylation reaction by ME proceeds not only with pyruvate, a natural substrate, but also with 2-ketoglutarate.

Structural and biochemical characterization of the M405S variant of Desulfovibrio vulgaris formate dehydrogenase

Molybdenum- or tungsten-dependent formate dehydrogenases have emerged as significant catalysts for the chemical reduction of CO2 to formate, with biotechnological applications envisaged in climate-change mitigation. The role of Met405 in the active site of Desulfovibrio vulgaris formate dehydrogenase AB (DvFdhAB) has remained elusive. However, its proximity to the metal site and the conformational change that it undergoes between the resting and active forms suggests a functional role. In this work, the M405S variant was engineered, which allowed the active-site geometry in the absence of methionine Sδ interactions with the metal site to be revealed and the role of Met405 in catalysis to be probed. This variant displayed reduced activity in both formate oxidation and CO2 reduction, together with an increased sensitivity to oxygen inactivation.

Biocatalysis of CO2 and CH4: Key enzymes and challenges

Mitigating greenhouse gas emissions is a critical challenge for promoting global sustainability. The utilization of CO2 and CH4 as substrates for the production of valuable products offers a promising avenue for establishing an eco-friendly economy. Biocatalysis, a sustainable process utilizing enzymes to facilitate biochemical reactions, plays a significant role in upcycling greenhouse gases. This review provides a comprehensive overview of the enzymes and associated reactions involved in the biocatalytic conversion of CO2 and CH4. Furthermore, the challenges facing the field are discussed, paving the way for future research directions focused on developing robust enzymes and systems for the efficient fixation of CO2 and CH4.

Highly Efficient Carbon Dioxide Electroreduction via DNA-Directed Catalyst Immobilization

Electrochemical reduction of carbon dioxide (CO2) is a promising route to up-convert this industrial byproduct. However, to perform this reaction with a small-molecule catalyst, the catalyst must be proximal to an electrode surface. Efforts to immobilize molecular catalysts on electrodes have been stymied by the need to optimize the immobilization chemistries on a case-by-case basis. Taking inspiration from nature, we applied DNA as a molecular-scale "Velcro" to investigate the tethering of three porphyrin-based catalysts to electrodes. This tethering strategy improved both the stability of the catalysts and their Faradaic efficiencies (FEs). DNA-catalyst conjugates were immobilized on screen-printed carbon and carbon paper electrodes via DNA hybridization with nearly 100% efficiency. Following immobilization, a higher catalyst stability at relevant potentials is observed. Additionally, lower overpotentials are required for the generation of carbon monoxide (CO). Finally, high FE for CO generation was observed with the DNA-immobilized catalysts as compared to the unmodified small-molecule systems, as high as 79.1% FE for CO at -0.95 V vs SHE using a DNA-tethered catalyst. This work demonstrates the potential of DNA "Velcro" as a powerful strategy for catalyst immobilization. Here, we demonstrated improved catalytic characteristics of molecular catalysts for CO2 valorization, but this strategy is anticipated to be generalizable to any reaction that proceeds in aqueous solutions.

A Multienzyme Cascade Pathway Immobilized in a Hydrogen-Bonded Organic Framework for the Conversion of CO2

The reduction of carbon dioxide to valuable chemicals through enzymatic processes is regarded as a promising approach for the reduction of carbon dioxide emissions. In this study, an in vitro multi-enzyme cascade pathway is constructed for the conversion of CO2 into dihydroxyacetone (DHA). This pathway, known as FFFP, comprises formate dehydrogenase (FDH), formaldehyde dehydrogenase (FaldDH), formolase (FLS), and phosphite dehydrogenase (PTDH), with PTDH serving as the critical catalyst for regenerating the coenzyme NADH. Subsequently, the immobilization of the FFFP pathway within the hydrogen-bonded organic framework (HOF-101) is accomplished in situ. A 1.8-fold increase in DHA yield is observed in FFFP@HOF-101 compared to the free FFFP pathway. This enhancement can be explained by the fact that within FFFP@HOF-101, enzymes are positioned sufficiently close to one another, leading to the elevation of the local concentration of intermediates and an improvement in mass transfer efficiency. Moreover, FFFP@HOF-101 displays a high degree of stability. In addition to the establishment of an effective DHA production method, innovative concepts for the tailored synthesis of fine compounds from CO2 through the utilization of various multi-enzyme cascade developments are generated by this work.

Structural basis for peroxidase encapsulation inside the encapsulin from the Gram-negative pathogen Klebsiella pneumoniae

Encapsulins are self-assembling protein nanocompartments capable of selectively encapsulating dedicated cargo proteins, including enzymes involved in iron storage, sulfur metabolism, and stress resistance. They represent a unique compartmentalization strategy used by many pathogens to facilitate specialized metabolic capabilities. Encapsulation is mediated by specific cargo protein motifs known as targeting peptides (TPs), though the structural basis for encapsulation of the largest encapsulin cargo class, dye-decolorizing peroxidases (DyPs), is currently unknown. Here, we characterize a DyP-containing encapsulin from the enterobacterial pathogen Klebsiella pneumoniae. By combining cryo-electron microscopy with TP and TP-binding site mutagenesis, we elucidate the molecular basis for cargo encapsulation. TP binding is mediated by cooperative hydrophobic and ionic interactions as well as shape complementarity. Our results expand the molecular understanding of enzyme encapsulation inside protein nanocompartments and lay the foundation for rationally modulating encapsulin cargo loading for biomedical and biotechnological applications.

Creating new-to-nature carbon fixation: A guide

Synthetic biology aims at designing new biological functions from first principles. These new designs allow to expand the natural solution space and overcome the limitations of naturally evolved systems. One example is synthetic CO2-fixation pathways that promise to provide more efficient ways for the capture and conversion of CO2 than natural pathways, such as the Calvin Benson Bassham (CBB) cycle of photosynthesis. In this review, we provide a practical guideline for the design and realization of such new-to-nature CO2-fixation pathways. We introduce the concept of "synthetic CO2-fixation", and give a general overview over the enzymology and topology of synthetic pathways, before we derive general principles for their design from their eight naturally evolved analogs. We provide a comprehensive summary of synthetic carbon-assimilation pathways and derive a step-by-step, practical guide from the theoretical design to their practical implementation, before ending with an outlook on new developments in the field.

Structure of recombinant formate dehydrogenase from Methylobacterium extorquens (MeFDH1)

Formate dehydrogenase (FDH) is critical for the conversion between formate and carbon dioxide. Despite its importance, the structural complexity of FDH and difficulties in the production of the enzyme have made elucidating its unique physicochemical properties challenging. Here, we purified recombinant Methylobacterium extorquens AM1 FDH (MeFDH1) and used cryo-electron microscopy to determine its structure. We resolved a heterodimeric MeFDH1 structure at a resolution of 2.8 Å, showing a noncanonical active site and a well-embedded Fe-S redox chain relay. In particular, the tungsten bis-molybdopterin guanine dinucleotide active site showed an open configuration with a flexible C-terminal cap domain, suggesting structural and dynamic heterogeneity in the enzyme.

Synergistic effect of K and Zn on Fe-based catalysts for efficient CO2 hydrogenation

Excessive emission of CO2 into the atmosphere has severely impacted the global ecological environment. Converting CO2 into valuable chemicals and fuels is of great significance for sustainable development. However, low activity and undesirable selectivity often result from the inherent inertness of CO2. Herein, K- or/and Zn-modified Fe-based catalysts were prepared by an incipient-wetness impregnation method for CO2 hydrogenation via a cascade reaction. The results indicate that K species exist as K2O while Zn species exist as ZnFe2O4. In the CO2 hydrogenation pathway, K2O facilitates the adsorption of CO2 and restrains the adsorption of H2, accelerating the transformation of CO2 into C2-C4 olefins rather than paraffins while Zn species promote the dispersion of Fe species, leading to improved activity. Synergistically, a K- and Zn-modified Fe-based catalyst (2Zn-10K-Fe/Al) shows excellent catalytic CO2 hydrogenation activity, achieving a CO2 conversion of 77% which is 1.8 times that (42%) of the unmodified Fe-based catalyst (Fe/Al). Our catalyst also shows a significantly promoted selectivity to C2-C4 olefins of 17% in comparison with the Fe/Al catalyst (0%). It is envisioned that such a binary effect of elements might contribute to the low-cost and industrial production of Fe-based catalysts for selective CO2 conversion.

Integration of Enzyme and Covalent Organic Frameworks: From Rational Design to Applications

Manufacturing is undergoing profound transformations, among which green biomanufacturing with low energy consumption, high efficiency, and sustainability is becoming one of the major trends. However, enzymes, as the "core chip" of biomanufacturing, are often handicapped in their application by their high cost, low operational stability, and nonreusability. Immobilization of enzymes is a technology that binds or restricts enzymes in a certain area with solid materials, allows them to still carry out their unique catalytic reaction, and allows them to be recycled and reused. Compared with free enzymes, immobilized enzymes boast numerous advantages such as enhanced storage stability, ease of separation, reusability, and controlled operation. Currently, commonly used supports for enzyme immobilization (e.g., mesoporous silica, sol-gel hydrogels, and porous polymer) can effectively improve enzyme stability and reduce product inhibition. However, they still face drawbacks such as potential leaching or conformational change during immobilization and poor machining performance. Especially, most enzyme carrier solid materials possess disordered structures, inevitably introducing deficiencies such as low loading capacity, hindered mass transfer, and unclear structure-property relationships. Additionally, it remains a notable challenge to meticulously design immobilization systems tailored to the specific characteristics of enzyme/reaction. Therefore, there is a significant demand for reliable solid materials to overcome the above challenges. Crystalline porous materials, particularly covalent organic frameworks (COFs), have garnered significant interest as a promising platform for immobilizing enzymes due to their unique properties, such as their crystalline nature, high porosity, accessible active sites, versatile synthetic conditions, and tunable structure. COFs create a stabilizing microenvironment that protects enzymes from denaturation and significantly enhances reusability. Nevertheless, some challenges still remain, including difficulties in loading large enzymes, reduced enzyme activities, and the limited functionality of carriers. Therefore, it is essential to develop innovative carriers and novel strategies to broaden the methods of immobilizing enzymes, enabling their application across a more diverse array of fields.The integration of enzymes with advanced porous materials for intensified performance and diverse applications is still in its infancy, and our group has done a series of pioneering works. This Account presents a comprehensive overview of recent research progress made by our group, including (i) the development of innovative enzyme immobilization strategies utilizing COFs to make the assembly and integration of enzymes and carriers more effective; (ii) rational design and construction of functional carriers for enzyme immobilization using COFs; and (iii) extensions of immobilized enzyme applications based on COFs from industrial catalysis to biomedicine and chiral separation. The integration of enzymes with functional crystalline materials offers mutual benefits and results in a performance that surpasses what either component can achieve individually. Additionally, immobilized enzymes exhibit enhanced functionality and intriguing characteristics that differ from those of free enzymes. Consistent with our research philosophy centered on integration, platform development, and engineering application, this Account addresses the critical challenges associated with enzyme immobilization using COFs while extending the applications of COFs and proposing future design principles for biomanufacturing and enzyme industry.

A high catalytic efficiency and chemotolerant formate dehydrogenase from Bacillus simplex

NAD+ -dependent formate dehydrogenase (FDH) catalyzes the conversion of formate and NAD+ to produce carbon dioxide and NADH. The reaction is biotechnologically important because FDH is widely used for NADH regeneration in various enzymatic syntheses. However, major drawbacks of this versatile enzyme in industrial applications are its low activity, requiring its utilization in large amounts to achieve optimal process conditions. Here, FDH from Bacillus simplex (BsFDH) was characterized for its biochemical and catalytic properties in comparison to FDH from Pseudomonas sp. 101 (PsFDH), a commonly used FDH in various biocatalytic reactions. The data revealed that BsFDH possesses high formate oxidizing activity with a kcat value of 15.3 ± 1.9 s-1 at 25°C compared to 7.7 ± 1.0 s-1 for PsFDH. At the optimum temperature (60°C), BsFDH exhibited 6-fold greater activity than PsFDH. The BsFDH displayed higher pH stability and a superior tolerance toward sodium azide and H2 O2 inactivation, showing a 200-fold higher Ki value for azide inhibition and remaining stable in the presence of 0.5% H2 O2 compared to PsFDH. The application of BsFDH as a cofactor regeneration system for the detoxification of 4-nitrophenol by the reaction of HadA, which produced a H2 O2 byproduct was demonstrated. The biocatalytic cascades using BsFDH demonstrated a distinct superior conversion activity because the system tolerated H2 O2 well. Altogether, the data showed that BsFDH is a robust enzyme suitable for future application in industrial biotechnology.

Lactic Acid from CO2: A Carbon Capture and Utilization Strategy Based on a Biocatalytic Approach

The EU low-carbon economy aims to reduce the level of CO2 emission in the EU to 80% by 2050. High efforts are required to achieve this goal, where successful CCU (Carbon Capture and Utilization) technologies will have a high impact. Biocatalysts offer a greener alternative to chemical catalysts for the development of CCU strategies since biocatalysis conforms 10 of the 12 principles of green chemistry. In this study, a multienzymatic system, based on alcohol dehydrogenase (ADH), pyruvate decarboxylase (PDC), and lactate dehydrogenase (LDH), that converts CO2 and ethanol into lactic acid leading to a 100% atom economy was studied. The system allows cofactor regeneration, thus reducing the process cost. Through reaction media engineering and enzyme ratio study, the performance of the system was able to produce up to 250 μM of lactic acid under the best conditions using 100% CO2, corresponding to the highest concentration of lactic acid obtained up to date using this multienzymatic approach. For the first time, the feasibility of the system to be applied under a real industrial environment has been tested using synthetic gas mimicking real blast furnace off-gases composition from the iron and steel industry. Under these conditions, the system was also capable of producing lactic acid, reaching 62 μM.

Characterization and Application of a Novel Glucose Dehydrogenase with Excellent Organic Solvent Tolerance for Cofactor Regeneration in Carbonyl Reduction

An efficient cofactor regeneration system has been developed to provide a hydride source for the preparation of optically pure alcohols by carbonyl reductase-catalyzed asymmetric reduction. This system employed a novel glucose dehydrogenase (BcGDH90) from Bacillus cereus HBL-AI. The gene encoding BcGDH90 was found through the genome-wide functional annotation. Homology-built model study revealed that BcGDH90 was a homo-tetramer, and each subunit was composed of βD-αE-αF-αG-βG motif, which was responsible for substrate binding and tetramer formation. The gene of BcGDH90 was cloned and expressed in Escherichia coli. The recombinant BcGDH90 exhibited maximum activity of 45.3 U/mg at pH 9.0 and 40 °C. BcGDH90 showed high stability in a wide pH range of 4.0-10.0 and was stable after the incubation at 55 °C for 5 h. BcGDH90 was not a metal ion-dependent enzyme, but Zn2+ could seriously inhibit its activity. BcGDH90 displayed excellent tolerance to 90% of acetone, methanol, ethanol, n-propanol, and isopropanol. Furthermore, BcGDH90 was applied to regenerate NADPH for the asymmetric biosynthesis of (S)-(+)-1-phenyl-1,2-ethanediol ((S)-PED) from hydroxyacetophenone (2-HAP) with high concentration, which increased the final efficiency by 59.4%. These results suggest that BcGDH90 is potentially useful for coenzyme regeneration in the biological reduction.

Redox Characterization of the Complex Molybdenum Enzyme Formate Dehydrogenase from Cupriavidus necator

The oxygen-tolerant and molybdenum-dependent formate dehydrogenase FdsDABG from Cupriavidus necator is capable of catalyzing both formate oxidation to CO2 and the reverse reaction (CO2 reduction to formate) at neutral pH, which are both reactions of great importance to energy production and carbon capture. FdsDABG is replete with redox cofactors comprising seven Fe/S clusters, flavin mononucleotide, and a molybdenum ion coordinated by two pyranopterin dithiolene ligands. The redox potentials of these centers are described herein and assigned to specific cofactors using combinations of potential-dependent continuous wave and pulse EPR spectroscopy and UV/visible spectroelectrochemistry on both the FdsDABG holoenzyme and the FdsBG subcomplex. These data represent the first redox characterization of a complex metal dependent formate dehydrogenase and provide an understanding of the highly efficient catalytic formate oxidation and CO2 reduction activity that are associated with the enzyme.

Changing the Electron Acceptor Specificity of Rhodobacter capsulatus Formate Dehydrogenase from NAD+ to NADP. Int J Mol Sci 2023;24:16067. [PMID: 38003259 PMCID: PMC10671435 DOI: 10.3390/ijms242216067] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

Formate dehydrogenases catalyze the reversible oxidation of formate to carbon dioxide. These enzymes play an important role in CO2 reduction and serve as nicotinamide cofactor recycling enzymes. More recently, the CO2-reducing activity of formate dehydrogenases, especially metal-containing formate dehydrogenases, has been further explored for efficient atmospheric CO2 capture. Here, we investigate the nicotinamide binding site of formate dehydrogenase from Rhodobacter capsulatus for its specificity toward NAD+ vs. NADP+ reduction. Starting from the NAD+-specific wild-type RcFDH, key residues were exchanged to enable NADP+ binding on the basis of the NAD+-bound cryo-EM structure (PDB-ID: 6TG9). It has been observed that the lysine at position 157 (Lys157) in the β-subunit of the enzyme is essential for the binding of NAD+. RcFDH variants that had Glu259 exchanged for either a positively charged or uncharged amino acid had additional activity with NADP+. The FdsBL279R and FdsBK276A variants also showed activity with NADP+. Kinetic parameters for all the variants were determined and tested for activity in CO2 reduction. The variants were able to reduce CO2 using NADPH as an electron donor in a coupled assay with phosphite dehydrogenase (PTDH), which regenerates NADPH. This makes the enzyme suitable for applications where it can be coupled with other enzymes that use NADPH.

Structural analysis of wild-type and Val120Thr mutant Candida boidinii formate dehydrogenase by X-ray crystallography

Candida boidinii NAD+-dependent formate dehydrogenase (CbFDH) has gained significant attention for its potential application in the production of biofuels and various industrial chemicals from inorganic carbon dioxide. The present study reports the atomic X-ray crystal structures of wild-type CbFDH at cryogenic and ambient temperatures, as well as that of the Val120Thr mutant at cryogenic temperature, determined at the Turkish Light Source `Turkish DeLight'. The structures reveal new hydrogen bonds between Thr120 and water molecules in the active site of the mutant CbFDH, suggesting increased stability of the active site and more efficient electron transfer during the reaction. Further experimental data is needed to test these hypotheses. Collectively, these findings provide invaluable insights into future protein-engineering efforts that could potentially enhance the efficiency and effectiveness of CbFDH.

Design and Construction of Artificial Biological Systems for One-Carbon Utilization

The third-generation (3G) biorefinery aims to use microbial cell factories or enzymatic systems to synthesize value-added chemicals from one-carbon (C1) sources, such as CO2, formate, and methanol, fueled by renewable energies like light and electricity. This promising technology represents an important step toward sustainable development, which can help address some of the most pressing environmental challenges faced by modern society. However, to establish processes competitive with the petroleum industry, it is crucial to determine the most viable pathways for C1 utilization and productivity and yield of the target products. In this review, we discuss the progresses that have been made in constructing artificial biological systems for 3G biorefineries in the last 10 years. Specifically, we highlight the representative works on the engineering of artificial autotrophic microorganisms, tandem enzymatic systems, and chemo-bio hybrid systems for C1 utilization. We also prospect the revolutionary impact of these developments on biotechnology. By harnessing the power of 3G biorefinery, scientists are establishing a new frontier that could potentially revolutionize our approach to industrial production and pave the way for a more sustainable future.

Rate of dilution and redox ratio influence the refolding efficiency of recombinant fungal dehydrogenases

Dehydrogenases from fungi are attracting attention as industrial biocatalysts due to their high activity and chiral selectivity. However, these enzymes form insoluble aggregates when overexpressed in E. coli, limiting their industrial application. In the present study, we report the systematic development of a refolding process for selected, industrially relevant fungal dehydrogenases, viz., formate dehydrogenase from Candida boidinii (CbFDH) and formate and alcohol dehydrogenases from Geotrichum candium (GcFDH and GcADH, respectively). We first employed a screen to evaluate the effects of different variables on refolding including the buffer system, additives, and rate of dilution. The extent of refolding was determined by enzyme assays, circular dichroism, and tryptophan fluorescence. Our results showed that glycerol and reducing environment are essential for refolding of these dehydrogenases. Further, slow dilution of solubilized protein over 16 h dramatically improved the recovery of refolded enzymes compared to rapid dilution. The importance of slow dilution was further confirmed in a 10-fold scaled-up refolding trial. Overall, we demonstrate a robust method for refolding of fungal dehydrogenases, thus improving their availability for various biocatalytic applications.

Structural basis for peroxidase encapsulation in a protein nanocompartment

Encapsulins are self-assembling protein nanocompartments capable of selectively encapsulating dedicated cargo proteins, including enzymes involved in iron storage, sulfur metabolism, and stress resistance. They represent a unique compartmentalization strategy used by many pathogens to facilitate specialized metabolic capabilities. Encapsulation is mediated by specific cargo protein motifs known as targeting peptides (TPs), though the structural basis for encapsulation of the largest encapsulin cargo class, dye-decolorizing peroxidases (DyPs), is currently unknown. Here, we characterize a DyP-containing encapsulin from the enterobacterial pathogen Klebsiella pneumoniae. By combining cryo-electron microscopy with TP mutagenesis, we elucidate the molecular basis for cargo encapsulation. TP binding is mediated by cooperative hydrophobic and ionic interactions as well as shape complementarity. Our results expand the molecular understanding of enzyme encapsulation inside protein nanocompartments and lay the foundation for rationally modulating encapsulin cargo loading for biomedical and biotechnological applications.

Renewable Hydrogen Production and Storage Via Enzymatic Interconversion of CO2 and Formate with Electrochemical Cofactor Regeneration

The urgent need to reduce CO2 emissions has motivated the development of CO2 capture and utilization technologies. An emerging application is CO2 transformation into storage chemicals for clean energy carriers. Formic acid (FA), a valuable product of CO2 reduction, is an excellent hydrogen carrier. CO2 conversion to FA, followed by H2 release from FA, are conventionally chemically catalyzed. Biocatalysts offer a highly specific and less energy-intensive alternative. CO2 conversion to formate is catalyzed by formate dehydrogenase (FDH), which usually requires a cofactor to function. Several FDHs have been incorporated in bioelectrochemical systems where formate is produced by the biocathode and the cofactor is electrochemically regenerated. H2 production from formate is also catalyzed by several microorganisms possessing either formate hydrogenlyase or hydrogen-dependent CO2 reductase complexes. Combination of these two processes can lead to a CO2 -recycling cycle for H2 production, storage, and release with potentially lower environmental impact than conventional methods.

Structure and function relationship of formate dehydrogenases: an overview of recent progress

Formate dehydrogenases (FDHs) catalyze the two-electron oxidation of formate to carbon dioxide. FDHs can be divided into several groups depending on their subunit composition and active-site metal ions. Metal-dependent (Mo- or W-containing) FDHs from prokaryotic organisms belong to the superfamily of molybdenum enzymes and are members of the dimethylsulfoxide reductase family. In this short review, recent progress in the structural analysis of FDHs together with their potential biotechnological applications are summarized.

Biochemical and structural insight into the chemical resistance and cofactor specificity of the formate dehydrogenase from Starkeya novella

Formate dehydrogenases (Fdhs) mediate the oxidation of formate to carbon dioxide and concomitant reduction of nicotinamide adenine dinucleotide (NAD+ ). The low cost of the substrate formate and importance of the product NADH as a cellular source of reducing power make this reaction attractive for biotechnological applications. However, the majority of Fdhs are sensitive to inactivation by thiol-modifying reagents. In this study, we report a chemically resistant Fdh (FdhSNO ) from the soil bacterium Starkeya novella strictly specific for NAD+ . We present its recombinant overproduction, purification and biochemical characterization. The mechanistic basis of chemical resistance was found to be a valine in position 255 (rather than a cysteine as in other Fdhs) preventing the inactivation by thiol-modifying compounds. To further improve the usefulness of FdhSNO as for generating reducing power, we rationally engineered the protein to reduce the coenzyme nicotinamide adenine dinucleotide phosphate (NADP+ ) with better catalytic efficiency than NAD+ . The single mutation D221Q enabled the reduction of NADP+ with a catalytic efficiency kCAT /KM of 0.4 s-1 ·mm-1 at 200 mm formate, while a quadruple mutant (A198G/D221Q/H379K/S380V) resulted in a fivefold increase in catalytic efficiency for NADP+ compared with the single mutant. We determined the cofactor-bound structure of the quadruple mutant to gain mechanistic evidence behind the improved specificity for NADP+ . Our efforts to unravel the key residues for the chemical resistance and cofactor specificity of FdhSNO may lead to wider use of this enzymatic group in a more sustainable (bio)manufacture of value-added chemicals, as for instance the biosynthesis of chiral compounds.

Light-Driven Hydrogen Evolution Reaction Catalyzed by a Molybdenum-Copper Artificial Hydrogenase

Orange protein (Orp) is a small bacterial metalloprotein of unknown function that harbors a unique molybdenum/copper (Mo/Cu) heterometallic cluster, [S₂MoS₂CuS₂MoS₂]^3-. In this paper, the performance of Orp as a catalyst for the photocatalytic reduction of protons into H₂ has been investigated under visible light irradiation. We report the complete biochemical and spectroscopic characterization of holo-Orp containing the [S₂MoS₂CuS₂MoS₂]^3- cluster, with docking and molecular dynamics simulations suggesting a positively charged Arg, Lys-containing pocket as the binding site. Holo-Orp exhibits excellent photocatalytic activity, in the presence of ascorbate as the sacrificial electron donor and [Ru(bpy)₃]Cl₂ as the photosensitizer, for hydrogen evolution with a maximum turnover number of 890 after 4 h irradiation. Density functional theory (DFT) calculations were used to propose a consistent reaction mechanism in which the terminal sulfur atoms are playing a key role in promoting H₂ formation. A series of dinuclear [S₂MS₂M'S₂MS₂]^(4n)- clusters, with M = Mo^VI, W^VI and M'⁽ⁿ⁺⁾ = Cu^I, Fe^I, Ni^I, Co^I, Zn^II, Cd^II were assembled in Orp, leading to different M/M'-Orp versions which are shown to display catalytic activity, with the Mo/Fe-Orp catalyst giving a remarkable turnover number (TON) of 1150 after 2.5 h reaction and an initial turnover frequency (TOF°) of 800 h^-1 establishing a record among previously reported artificial hydrogenases.

Revealing holistic metabolic responses associated with lipid and docosahexaenoic acid (DHA) production in Aurantiochytrium sp. SW1

Aurantiochytrium sp. SW1, a marine thraustochytrid, has been regarded as a potential candidate as a docosahexaenoic acid (DHA) producer. Even though the genomics of Aurantiochytrium sp. are available, the metabolic responses at a systems level are largely unknown. Therefore, this study aimed to investigate the global metabolic responses to DHA production in Aurantiochytrium sp. through transcriptome and genome-scale network-driven analysis. Of a total of 13,505 genes, 2527 differentially expressed genes (DEGs) were identified in Aurantiochytrium sp., unravelling the transcriptional regulations behinds lipid and DHA accumulation. The highest number of DEG were found for pairwise comparison between growth phase and lipid accumulating phase where a total of 1435 genes were down-regulated with 869 genes being up-regulated. These uncovered several metabolic pathways that contributing in DHA and lipid accumulation including amino acid and acetate metabolism which involve in the generation of crucial precursors. Upon applying network-driven analysis, hydrogen sulphide was found as potential reporter metabolite that could be associated with the genes related to acetyl-CoA synthesis for DHA production. Our findings suggest that the transcriptional regulation of these pathways is a ubiquitous feature in response to specific cultivation phases during DHA overproduction in Aurantiochytrium sp. SW1.

Applications of Metal-Organic Frameworks and Their Derivatives in Electrochemical CO2 Reduction

Electrochemically reducing CO2 to more reduced chemical species is a promising way that not only enables the conversion of intermittent energy resources to stable fuels, but also helps to build a closed-loop anthropogenic carbon cycle. Among various electrocatalysts for electrochemical CO2 reduction, multifunctional metal-organic frameworks (MOFs) have been employed as highly efficient and selective heterogeneous electrocatalysts due to their ultrahigh porosity and topologically diverse structures. Up to now, great progress has been achieved in the design and synthesis of highly active and selective MOF-related catalysts for electrochemical CO2 reduction reaction (CO2RR), and their corresponding reaction mechanisms have been thoroughly studied. In this review, we summarize the recent progress of applying MOFs and their derivatives in CO2RR, with a focus on the design strategies for electrocatalysts and electrolyzers. We first discussed the reaction mechanisms for different CO2RR products and introduced the commonly applied electrolyzer configurations in the current CO2RR system. Then, an overview of several categories of products (CO, HCOOH, CH4, CH3OH, and multi-carbon chemicals) generated from MOFs or their derivatives via CO2RR was discussed. Finally, we offer some insights and perspectives for the future development of MOFs and their derivatives in electrochemical CO2 reduction. We aim to provide new insights into this field and further guide future research for large-scale applications.

Recent Advances of Indium Oxide-Based Catalysts for CO2 Hydrogenation to Methanol: Experimental and Theoretical

Methanol synthesis from the hydrogenation of carbon dioxide (CO₂) with green H₂ has been proven as a promising method for CO₂ utilization. Among the various catalysts, indium oxide (In₂O₃)-based catalysts received tremendous research interest due to the excellent methanol selectivity with appreciable CO₂ conversion. Herein, the recent experimental and theoretical studies on In₂O₃-based catalysts for thermochemical CO₂ hydrogenation to methanol were systematically reviewed. It can be found that a variety of steps, such as the synthesis method and pretreatment conditions, were taken to promote the formation of oxygen vacancies on the In₂O₃ surface, which can inhibit side reactions to ensure the highly selective conversion of CO₂ into methanol. The catalytic mechanism involving the formate pathway or carboxyl pathway over In₂O₃ was comprehensively explored by kinetic studies, in situ and ex situ characterizations, and density functional theory calculations, mostly demonstrating that the formate pathway was extremely significant for methanol production. Additionally, based on the cognition of the In₂O₃ active site and the reaction path of CO₂ hydrogenation over In₂O₃, strategies were adopted to improve the catalytic performance, including (i) metal doping to enhance the adsorption and dissociation of hydrogen, improve the ability of hydrogen spillover, and form a special metal-In₂O₃ interface, and (ii) hybrid with other metal oxides to improve the dispersion of In₂O₃, enhance CO₂ adsorption capacity, and stabilize the key intermediates. Lastly, some suggestions in future research were proposed to enhance the catalytic activity of In₂O₃-based catalysts for methanol production. The present review is helpful for researchers to have an explicit version of the research status of In₂O₃-based catalysts for CO₂ hydrogenation to methanol and the design direction of next-generation catalysts.

Paving the way for synthetic C1 - Metabolism in Pseudomonas putida through the reductive glycine pathway

One-carbon (C1) compounds such as methanol, formate, and CO₂ are alternative, sustainable microbial feedstocks for the biobased production of chemicals and fuels. In this study, we engineered the carbon metabolism of the industrially important bacterium Pseudomonas putida to modularly assimilate these three substrates through the reductive glycine pathway. First, we demonstrated the functionality of the C1-assimilation module by coupling the growth of auxotrophic strains to formate assimilation. Next, we extended the module in the auxotrophic strains from formate to methanol-dependent growth using both NAD and PQQ-dependent methanol dehydrogenases. Finally, we demonstrated, for the first time, engineered CO₂-dependent formation of part of the biomass through CO₂ reduction to formate by the native formate dehydrogenase, which required short-term evolution to rebalance the cellular NADH/NAD ⁺ ratio. This research paves the way to further engineer P. putida towards full growth on formate, methanol, and CO₂ as sole feedstocks, thereby substantially expanding its potential as a sustainable and versatile cell factory.

Bioelectrocatalysis for CO2 reduction: recent advances and challenges to develop a sustainable system for CO2 utilization

Activation and turning CO₂ into value added products is a promising orientation to address environmental issues caused by CO₂ emission. Currently, electrocatalysis has a potent well-established role for CO₂ reduction with fast electron transfer rate; but it is challenged by the poor selectivity and low faradic efficiency. On the other side, biocatalysis, including enzymes and microbes, has been also employed for CO₂ conversion to target C_n products with remarkably high selectivity; however, low solubility of CO₂ in the liquid reaction phase seriously affects the catalytic efficiency. Therefore, a new synergistic role in bioelectrocatalysis for CO₂ reduction is emerging thanks to its outstanding selectivity, high faradic efficiency, and desirable valuable C_n products under mild condition that are surveyed in this review. Herein, we comprehensively discuss the results already obtained for the integration craft of enzymatic-electrocatalysis and microbial-electrocatalysis technologies. In addition, the intrinsic nature of the combination is highly dependent on the electron transfer. Thus, both direct electron transfer and mediated electron transfer routes are modeled and concluded. We also explore the biocompatibility and synergistic effects of electrode materials, which emerge in combination with tuned enzymes and microbes to improve catalytic performance. The system by integrating solar energy driven photo-electrochemical technics with bio-catalysis is further discussed. We finally highlight the significant findings and perspectives that have provided strong foundations for the remarkable development of green and sustainable bioelectrocatalysis for CO₂ reduction, and that offer a blueprint for C_n valuable products originate from CO₂ under efficient and mild conditions.

Enzymatic Conversion of CO2: From Natural to Artificial Utilization

Enzymatic carbon dioxide fixation is one of the most important metabolic reactions as it allows the capture of inorganic carbon from the atmosphere and its conversion into organic biomass. However, due to the often unfavorable thermodynamics and the difficulties associated with the utilization of CO₂, a gaseous substrate that is found in comparatively low concentrations in the atmosphere, such reactions remain challenging for biotechnological applications. Nature has tackled these problems by evolution of dedicated CO₂-fixing enzymes, i.e., carboxylases, and embedding them in complex metabolic pathways. Biotechnology employs such carboxylating and decarboxylating enzymes for the carboxylation of aromatic and aliphatic substrates either by embedding them into more complex reaction cascades or by shifting the reaction equilibrium via reaction engineering. This review aims to provide an overview of natural CO₂-fixing enzymes and their mechanistic similarities. We also discuss biocatalytic applications of carboxylases and decarboxylases for the synthesis of valuable products and provide a separate summary of strategies to improve the efficiency of such processes. We briefly summarize natural CO₂ fixation pathways, provide a roadmap for the design and implementation of artificial carbon fixation pathways, and highlight examples of biocatalytic cascades involving carboxylases. Additionally, we suggest that biochemical utilization of reduced CO₂ derivates, such as formate or methanol, represents a suitable alternative to direct use of CO₂ and provide several examples. Our discussion closes with a techno-economic perspective on enzymatic CO₂ fixation and its potential to reduce CO₂ emissions.

Enzyme mediated transformation of CO2 into calcium carbonate using purified microbial carbonic anhydrase

In this study, a bacterial carbonic anhydrase (CA) was purified from Corynebacterium flavescens for the CO₂ conversion into CaCO₃. The synthesized CaCO₃ can be utilized in the papermaking industry as filler material, construction material and in steel industry. Herein, the CA was purified by using a Sephadex G-100 column chromatography having 29.00 kDa molecular mass in SDS-PAGE analysis. The purified CA showed an optimal temperature of 35 °C and pH 7.5. In addition, a kinetic study of CA using p-NPA as substrate showed V_max (166.66 μmoL/mL/min), K_m (5.12 mM), and K_cat (80.56 sec^-1) using Lineweaver Burk plot. The major inhibitors of CA activity were Na²⁺, K⁺, Mn²⁺, and Al³⁺, whereas Zn²⁺ and Fe²⁺ slightly enhanced it. The purified CA showed a good efficacy to convert the CO₂ into CaCO₃ with a total conversion rate of 65.05 mg CaCO₃/mg of protein. In silico analysis suggested that the purified CA has conserved Zn²⁺ coordinating residues such as His 111, His 113, and His 130 in the active site center. Further analysis of the CO₂ binding site showed conserved residues such as Val 132, Val 142, Leu 196, Thr 197, and Val 205. However, a substitution has been observed where Trp 208 of its closest structural homolog T. ammonificans CA is replaced with Arg 207 of C. flavescens. The presence of a hydrophilic mutation in the CO₂ binding hydrophobic region is a further subject of investigation.

Improving the Enzymatic Cascade of Reactions for the Reduction of CO2 to CH3OH in Water: From Enzymes Immobilization Strategies to Cofactor Regeneration and Cofactor Suppression

The need to decrease the concentration of CO2 in the atmosphere has led to the search for strategies to reuse such molecule as a building block for chemicals and materials or a source of carbon for fuels. The enzymatic cascade of reactions that produce the reduction of CO2 to methanol seems to be a very attractive way of reusing CO2; however, it is still far away from a potential industrial application. In this review, a summary was made of all the advances that have been made in research on such a process, particularly on two salient points: enzyme immobilization and cofactor regeneration. A brief overview of the process is initially given, with a focus on the enzymes and the cofactor, followed by a discussion of all the advances that have been made in research, on the two salient points reported above. In particular, the enzymatic regeneration of NADH is compared to the chemical, electrochemical, and photochemical conversion of NAD+ into NADH. The enzymatic regeneration, while being the most used, has several drawbacks in the cost and life of enzymes that suggest attempting alternative solutions. The reduction in the amount of NADH used (by converting CO2 electrochemically into formate) or even the substitution of NADH with less expensive mimetic molecules is discussed in the text. Such an approach is part of the attempt made to take stock of the situation and identify the points on which work still needs to be conducted to reach an exploitation level of the entire process.

Bioinspired Metalation of the Metal-Organic Framework MIL-125-NH2 for Photocatalytic NADH Regeneration and Gas-Liquid-Solid Three-Phase Enzymatic CO2 Reduction

Coenzyme NADH regeneration is crucial for sustained photoenzymatic catalysis of CO₂ reduction. However, light-driven NADH regeneration still suffers from the low regeneration efficiency and requires the use of a homogeneous Rh complex. Herein, a Rh complex-based electron transfer unit was chemically attached onto the linker of the MIL-125-NH₂ . The coupling between the light-harvesting iminopyridine unit and electron-transferring Rh-complex facilitated the photo-induced electron transfer for the NADH regeneration with the yield of 66.4 % in 60 mins for 5 cycles. The formate dehydrogenase was further deposited onto the hydrophobic layer of the membrane by a reverse filtering technique, which forms the gas-liquid-solid reaction interface around the enzyme site. It gave an enhanced formic acid yield of 9.5 mM in 24 hours coupled with the in situ regenerated NADH. The work could shed light on the construction of integrated inorganic-enzyme hybrid systems for artificial photosynthesis.

Strategies for overcoming the limitations of enzymatic carbon dioxide reduction

The overexploitation of fossil fuels has led to a significant increase in atmospheric carbon dioxide (CO₂) concentrations, thereby causing problems, such as the greenhouse effect. Rapid global climate change has caused researchers to focus on utilizing CO₂ in a green and efficient manner. One of the ways to achieve this is by converting CO₂ into valuable chemicals via chemical, photochemical, electrochemical, or enzymatic methods. Among these, the enzymatic method is advantageous because of its high specificity and selectivity as well as the mild reaction conditions required. The reduction of CO₂ to formate, formaldehyde, and methanol using formate dehydrogenase (FDH), formaldehyde dehydrogenase (F_aldDH), and alcohol dehydrogenase (ADH) are attractive routes, respectively. In this review, strategies for overcoming the common limitations of enzymatic CO₂ reduction are discussed. First, we present a brief background on the importance of minimizing of CO₂ emissions and introduce the three bottlenecks limiting enzymatic CO₂ reduction. Thereafter, we explore the different strategies for enzyme immobilization on various support materials. To solve the problem of cofactor consumption, different state-of-the-art cofactor regeneration strategies as well as research on the development of cofactor substitutes and cofactor-free systems are extensively discussed. Moreover, aiming at improving CO₂ solubility, biological, physical, and engineering measures are reviewed. Finally, conclusions and future perspectives are presented.

A Review on the Design and Performance of Enzyme-Aided Catalysis of Carbon Dioxide in Membrane, Electrochemical Cell and Photocatalytic Reactors

Multi-enzyme cascade catalysis involved three types of dehydrogenase enzymes, namely, formate dehydrogenase (FDH), formaldehyde dehydrogenase (FaldDH), alcohol dehydrogenase (ADH), and an equimolar electron donor, nicotinamide adenine dinucleotide (NADH), assisting the reaction is an interesting pathway to reduce thermodynamically stable molecules of CO₂ from the atmosphere. The biocatalytic sequence is interesting because it operates under mild reaction conditions (low temperature and pressure) and all the enzymes are highly selective, which allows the reaction to produce three basic chemicals (formic acid, formaldehyde, and methanol) in just one pot. There are various challenges, however, in applying the enzymatic conversion of CO₂, namely, to obtain high productivity, increase reusability of the enzymes and cofactors, and to design a simple, facile, and efficient reactor setup that will sustain the multi-enzymatic cascade catalysis. This review reports on enzyme-aided reactor systems that support the reduction of CO₂ to methanol. Such systems include enzyme membrane reactors, electrochemical cells, and photocatalytic reactor systems. Existing reactor setups are described, product yields and biocatalytic productivities are evaluated, and effective enzyme immobilization methods are discussed.