Micro- and nanoplastic transfer, accumulation, and toxicity in humans

Microplastics in the diet of Hermetia illucens: Implications for development and midgut bacterial and fungal microbiota

In a world with a population exceeding 8 billion people and continuing to grow, pollution from food and plastic waste is causing long-term issues in ecosystems. Potential solutions may be found by exploiting insect-based bioconversion. In this context, we investigated the impact of polyvinyl chloride microparticles (PVC-MPs) on the development of Hermetia illucens (black soldier fly; BSF) and its midgut bacterial and fungal microbiota. The impact of PVC-MPs was evaluated feeding BSF larvae with a PVC-MPs-supplemented diet. The larvae exposed to different PVC-MPs concentrations (2.5%, 5%, 10% and 20% w/w) developed into adults with no significant increase in pupal mortality. Faster development and smaller pupae were observed when 20% PVC-MPs was provided. The BSF larvae ingest PVC-MPs, resulting in a reduction in MPs size. Larvae exposed to PVC-MPs did not exhibit differences in gut morphology. Regarding the impact of PVC-MPs on the structure of both bacterial and fungal communities, the overall alpha- and beta-diversity did not exhibit significant changes. However, the presence of PVC-MPs significantly affected the relative abundances of Enterobacteriaceae and Paenibacillaceae among the bacteria and of Dipodascaceae and Plectospharellaceae among the fungi (including yeast and filamentous life forms), suggesting that PVC-MP contamination has a taxa-dependent impact. These results indicate that BSF larvae can tolerate PVC-MPs in their diet, supporting the potential use of these insects in organic waste management, even in the presence of high levels of PVC-MP contamination.

Harnessing Magnetic Nanoparticles for the Effective Removal of Micro- and Nanoplastics: A Critical Review

The spread of micro- (MPs) and nanoplastics (NPs) in the environment has become a significant environmental concern, necessitating effective removal strategies. In this comprehensive scientific review, we examine the use of magnetic nanoparticles (MNPs) as a promising technology for the removal of MPs and NPs from water. We first describe the issues of MPs and NPs and their impact on the environment and human health. Then, the fundamental principles of using MNPs for the removal of these pollutants will be presented, emphasizing that MNPs enable the selective binding and separation of MPs and NPs from water sources. Furthermore, we provide a short summary of various types of MNPs that have proven effective in the removal of MPs and NPs. These include ferromagnetic nanoparticles and MNPs coated with organic polymers, as well as nanocomposites and magnetic nanostructures. We also review their properties, such as magnetic saturation, size, shape, surface functionalization, and stability, and their influence on removal efficiency. Next, we describe different methods of utilizing MNPs for the removal of MPs and NPs. We discuss their advantages, limitations, and potential for further development in detail. In the final part of the review, we provide an overview of the existing studies and results demonstrating the effectiveness of using MNPs for the removal of MPs and NPs from water. We also address the challenges that need to be overcome, such as nanoparticle optimization, process scalability, and the removal and recycling of nanoparticles after the completion of the process. This comprehensive scientific review offers extensive insights into the use of MNPs for the removal of MPs and NPs from water. With improved understanding and the development of advanced materials and methods, this technology can play a crucial role in addressing the issues of MPs and NPs and preserving a clean and healthy environment. The novelty of this review article is the emphasis on MNPs for the removal of MPs and NPs from water and a detailed review of the advantages and disadvantages of various MNPs for the mentioned application. Additionally, a review of a large number of publications in this field is provided.

Microplastics removal efficiency and risk analysis of wastewater treatment plants in Oman

Microplastics (MPs) have recently been documented as an emerging pollutant that poses a critical threat to environment. Wastewater treatment plants (WWTPs) are commonly regarded as significant contributors to the presence of MPs. This study aimed to assess the MPs load of three wastewater treatment facilities in Oman using various treatments, including MBR, SBR, and CAS. Wastewater samples from influent, effluent, and sludge were collected and analyzed to determine the concentration, morphology, size, color, and polymer type of the MPs. A set of sieves with a mesh size range of 1 mm-45 μm was used to for filtration. Oxidation treatment was applied for all samples using Fenton's reagent, followed by density separation by sodium chloride solution. The Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (ATR- FTIR) method was utilized to test 10% from each sampling point to confirm the polymer types of the MPs. The pollution load index (PLI) and hazard index (HI) have been employed to assess the risk associated with the chemical toxicity and concentration of detected particles. The PROMETHEE method was used to rank the risk of sampling sites based on different criteria that posed potential ecological and human health risks. The results indicate that the average concentrations of 0.99 MP/L, 1.38 MP/L, and 0.93 MP/L were detected in the final treated effluent of WWTP A, WWTP B, and WWTP C, respectively. These concentrations correspond to overall removal efficiencies of 82.5%, 77.4%, and 79.2% for WWTP A, WWTP B, and WWTP C, respectively Most MPs found in tertiary effluent were smaller particles (425 μm) and fiber-shaped. The major types of MPs were polypropylene (PP), low-density polyethylene (LDPE), polyurethane (PU), polyethylene terephthalate (PET), and Polyvinyl chloride (PVC). This study showed that treated effluent and sludge release significant MPs into the environment.

Microplastics suspended in dust from different indoor environments in Barranquilla, Colombia: Predominant microparticles?

Considering that microplastics (MPs) are classified as ubiquitous pollutants, that air quality affects human health, and that people remain indoors most of the time, the need has arisen to evaluate the exposure to MPs within the suspended dust in indoor environments. With this objective, the present study carried out passive sampling to analyze the precipitation of microparticles in some indoor residential environments (2 apartments) and workplaces (an office, a pastry shop, a gift shop, and a paint shop) in Barranquilla, Colombia. The quantification and physical characterization of microparticles were carried out under a stereomicroscope, and the chemical characterization was carried out by infrared microspectroscopy (μFTIR). The highest average concentration of MPs in the apartments was found in the air-conditioned rooms (1.1 × 104 MP/m2/day), and concerning the workplaces, the gift shop and the paint shop were the spaces with a higher proportion of MPs (6.0-6.1 × 103 MP/m2/day), with polyesters being the main synthetic polymers, but being semi-synthetic particles the predominant among the samples. Regarding its morphology, fibers were the most abundant shape (>90%), grouping mainly in the 1000-5000 μm range, while the few fragments found were mostly grouped below 50 μm. Exposure by inhalation of MPs in adults was estimated between 1.7 × 102-1.6 × 103 MP/kg/day, while by ingestion it ranged between 2.7 × 102-2.4 × 103 MPs/kg/day. On the other hand, within our research, a significant presence of non-plastic microparticles was found, which reached up to 69% in analyzed samples, corresponding mainly to cotton and cellulose, so we suggest that these should also be included in future studies that aim to estimate potential health implications from exposure to suspended micropollutants.

Microplastic Human Dietary Uptake from 1990 to 2018 Grew across 109 Major Developing and Industrialized Countries but Can Be Halved by Plastic Debris Removal

Microplastics (MPs), plastic particles smaller than 5 mm, are now a growing environmental and public health issue, as they are detected pervasively in freshwater and marine environments, ingested by organisms, and then enter the human body. Industrial development drives this environmental burden caused by MP formation and human uptake by elevating plastic pollution levels and shaping the domestic dietary structure. We map the MP human uptake across 109 global countries on five continents from 1990 to 2018, focusing on the world's major coastlines that are affected by plastic pollution that affects the United Nations' Sustainable Development Goals (SDGs): SDG 6 (Clean Water and Sanitation), SDG 14 (Life Below Water), and SDG 15 (Life on Land). Amid rapid industrial growth, Indonesia tops the global per capita MP dietary intake at 15 g monthly. In Asian, African, and American countries, including China and the United States, airborne and dietary MP uptake increased over 6-fold from 1990 to 2018. Eradicating 90% of global aquatic plastic debris can help decrease MP uptake by more than 48% in Southeast Asian countries that peak MP uptake. To reduce MP uptake and potential public health risks, governments in developing and industrialized countries in Asia, Europe, Africa, and North and South America should incentivize the removal of free plastic debris from freshwater and saltwater environments through advanced water treatment and effective solid waste management practices.

Biomimetic microfluidic chips for toxicity assessment of environmental pollutants

Various types of pollutants widely present in environmental media, including synthetic and natural chemicals, physical pollutants such as radioactive substances, ultraviolet rays, and noise, as well as biological organisms, pose a huge threat to public health. Therefore, it is crucial to accurately and effectively explore the human physiological responses and toxicity mechanisms of pollutants to prevent diseases caused by pollutants. The emerging toxicological testing method biomimetic microfluidic chips (BMCs) exhibit great potential in environmental pollutant toxicity assessment due to their superior biomimetic properties. The BMCs are divided into cell-on-chips and organ-on-chips based on the distinctions in bionic simulation levels. Herein, we first summarize the characteristics, emergence and development history, composition and structure, and application fields of BMCs. Then, with a focus on the toxicity mechanisms of pollutants, we review the applications and advances of the BMCs in the toxicity assessment of physical, chemical, and biological pollutants, respectively, highlighting its potential and development prospects in environmental toxicology testing. Finally, the opportunities and challenges for further use of BMCs are discussed.

Differences in toxicity induced by the various polymer types of nanoplastics on HepG2 cells

The problem of microplastics (MPs) contamination in food has gradually come to the fore. MPs can be transmitted through the food chain and accumulate within various organisms, ultimately posing a threat to human health. The concentration of nanoplastics (NPs) exposed to humans may be higher than that of MPs. For the first time, we studied the differences in toxicity, and potential toxic effects of different polymer types of NPs, namely, polyethylene terephthalate (PET), polyvinyl chloride (PVC), and polystyrene (PS) on HepG2 cells. In this study, PET-NPs, PVC-NPs, and PS-NPs, which had similar particle size, surface charge, and shape, were prepared using nanoprecipitation and emulsion polymerization. The results of the CCK-8 assay showed that the PET-NPs and PVC-NPs induced a decrease in cell viability in a concentration-dependent manner, and their lowest concentrations causing significant cytotoxicity were 100 and 150 μg/mL, respectively. Moreover, the major cytotoxic effects of PET-NPs and PVC-NPs at high concentrations may be to induce an increase in intracellular ROS, which in turn induces cellular damage and other toxic effects. Notably, our study suggested that PET-NPs and PVC-NPs may induce apoptosis in HepG2 cells through the mitochondrial apoptotic pathway. However, no relevant cytotoxicity, oxidative damage, and apoptotic toxic effects were detected in HepG2 cells with exposure to PS-NPs. Furthermore, the analysis of transcriptomics data suggested that PET-NPs and PVC-NPs could significantly inhibit the expression of DNA repair-related genes in the p53 signaling pathway. Compared to PS-NPs, the expression levels of lipid metabolism-related genes were down-regulated to a greater extent by PET-NPs and PVC-NPs. In conclusion, PET-NPs and PVC-NPs were able to induce higher cytotoxic effects than PS-NPs, in which the density and chemical structure of NPs of different polymer types may be the key factors causing the differences in toxicity.

Polystyrene microplastic-induced extracellular vesicles cause kidney-related effects in the crosstalk between tubular cells and fibroblasts

Plastic waste accumulation and its degradation into microplastics (MPs) and nanoplastics (NPs) pose environmental concerns. Previous studies have indicated that polystyrene (PS)-MPs harm living animals. Extracellular vesicles (EVs) are associated with metabolic reprogramming and mitochondrial dysfunction in various kidney diseases. In this article, we evaluated how PS-MPs affected tubular cells and fibroblasts. The results demonstrated that PS-MPs increased EV production in human tubular cells and caused endoplasmic reticulum (ER) stress-related proteins without inducing inflammation-related proteins in human tubular cells. The uptake of PS-MPs and incubation with the conditioned medium of PS-MPs induced reactive oxygen species (ROS) production and ER stress-related proteins in fibroblast cells. The fibroblast cells treated with the conditioned medium of PS-MPs also increased the expression of fibrosis-related proteins. Our findings suggested that the expression of EV-related markers increased in tubular cells via Beclin 1 after PS-MP treatment. In addition, PS-MPs induced ROS production in vitro and in vivo. We found that PS-MPs also altered the expression of EV markers in urine, and CD63 expression was also increased in vitro and in vivo after PS-MP treatment. In conclusion, PS-MP-induced EVs lead to ER stress-related proteins, ROS production and fibrosis-related proteins in tubular cells and fibroblasts.

Limits of the detection of microplastics in fish tissue using stimulated Raman scattering microscopy

We demonstrate the detection sensitivity of microplastic beads within fish tissue using stimulated Raman scattering (SRS) microscopy. The intrinsically provided chemical contrast distinguishes different types of plastic compounds within fish tissue. We study the size-dependent signal-to-noise ratio of the microplastic beads and determine a lower boundary for the detectable size. Our findings demonstrate how SRS microscopy can serve as a complementary modality to conventional Raman scattering imaging in order to detect and identify microplastic particles in fish tissue.

Smart carbon-based sensors for the detection of non-coding RNAs associated with exposure to micro(nano)plastics: an artificial intelligence perspective

Micro(nano)plastics (MNPs) are pervasive environmental pollutants that individuals eventually consume. Despite this, little is known about MNP's impact on public health. In this article, we assess the evidence for potentially harmful consequences of MNPs in the human body, concentrating on molecular toxicity and exposure routes. Since MNPs are present in various consumer products, foodstuffs, and the air we breathe, exposure can occur through ingestion, inhalation, and skin contact. MNPs exposure can cause mitochondrial oxidative stress, inflammatory lesions, and epigenetic modifications, releasing specific non-coding RNAs in circulation, which can be detected to diagnose non-communicable diseases. This article examines the most fascinating smart carbon-based nanobiosensors for detecting circulating non-coding RNAs (lncRNAs and microRNAs). Carbon-based smart nanomaterials offer many advantages over traditional methods, such as ease of use, sensitivity, specificity, and efficiency, for capturing non-coding RNAs. In particular, the synthetic methods, conjugation chemistries, doping, and in silico approach for the characterization of synthesized carbon nanodots and their adaptability to identify and measure non-coding RNAs associated with MNPs exposure is discussed. Furthermore, the article provides insights into the use of artificial intelligence tools for designing smart carbon nanomaterials.

Polyethylene nanoplastics cause reproductive toxicity associated with activation of both estrogenic hormone receptor NHR-14 and DNA damage checkpoints in C. elegans

As the most commercial polymer, the polyethylene nanoparticle (PE-NP) has been discharged into the environment and poses potential risks to organisms. However, the possible reproductive toxicity of PE-NP and underlying mechanisms remain largely unknown. In this study, Caenorhabditis elegans was employed as the animal model to effects of PE-NP (100 nm) and their leachates on reproduction and underlying mechanisms. Nematodes were exposed to PE-NP at 0.1-100 μg/L from L1-larvae to adult day 1 (approximately 4.5 days). Both brood size and number of fertilized eggs in uterus were decreased by 10 and 100 μg/L PE-NP, but could not be affected by their leachates. In addition, number of mitotic cells, length, and area of gonad were reduced by 10 and 100 μg/L PE-NP, but were not altered by their leachates. Accompanied with alteration in expressions of genes (egl-1, ced-9, ced-4, and ced-3) governing cell apoptosis, germline apoptosis was enhanced by PE-NP. Meanwhile, DNA damage was involved in the enhancement germline apoptosis after PE-NP exposure. PE-NP further increased expression of nhr-14 encoding estrogenic hormone receptor, and RNAi of nhr-14 suppressed PE-NP reproductive toxicity. Moreover, RNAi of nhr-14 decreased expression of egl-1, ced-4, ced-3, and mrt-2 in PE-NP exposed nematodes. Therefore, exposure to PE-NPs rather than in their leachates potentially caused reproductive toxicity by activating both estrogenic hormone receptor NHR-14 and DNA damage checkpoints (CLK-2, HUS-1, and MRT-2) in nematodes. These findings provide important insights into the exposure risk of PE-NPs on reproduction of environmental organisms.

Polystyrene nanoplastics exposure causes inflammation and death of esophageal cell

Nanoplastics (NPs) are widely detected in food and drinking water, and human exposure to NPs is ubiquitous. The digestive tract is the main route of exposure to NPs in humans, and the esophagus is one of the main target organs for NPs exposure. However, the toxicological effects of polystyrene nanoplastics (PS-NPs) on the esophagus are not fully understood. Here, we used two esophageal cell lines as models to explore the effects of NPs exposure on esophageal cells and the underlying molecular mechanisms. Western blot analysis, indirect immunofluorescence assay, and enzyme-linked immunosorbent assay revealed that NPs exposure caused inflammatory responses and cell death. Mechanistic investigations showed that PS-NPs exposure induced iron overload in esophageal cells, leading to the accumulation of mitochondrial reactive oxygen species and promoting inflammatory responses and cell death. Additionally, PS-NPs treatment suppressed mitochondrial autophagy, which exacerbated NP-induced cell inflammation and death. Collectively, our experimental findings provide new evidence for the toxicological effects of PS-NPs and offer new insights and avenues for future research.

Risks Associated with the Presence of Polyvinyl Chloride in the Environment and Methods for Its Disposal and Utilization

Plastics have recently become an indispensable part of everyone's daily life due to their versatility, durability, light weight, and low production costs. The increasing production and use of plastics poses great environmental problems due to their incomplete utilization, a very long period of biodegradation, and a negative impact on living organisms. Decomposing plastics lead to the formation of microplastics, which accumulate in the environment and living organisms, becoming part of the food chain. The contamination of soils and water with poly(vinyl chloride) (PVC) seriously threatens ecosystems around the world. Their durability and low weight make microplastic particles easily transported through water or air, ending up in the soil. Thus, the problem of microplastic pollution affects the entire ecosystem. Since microplastics are commonly found in both drinking and bottled water, humans are also exposed to their harmful effects. Because of existing risks associated with the PVC microplastic contamination of the ecosystem, intensive research is underway to develop methods to clean and remove it from the environment. The pollution of the environment with plastic, and especially microplastic, results in the reduction of both water and soil resources used for agricultural and utility purposes. This review provides an overview of PVC's environmental impact and its disposal options.

Unraveling the in vivo fate of inhaled micro- and nanoplastics with PET imaging

Microplastics and nanoplastics have become ubiquitous environmental pollutants. The threat these plastics pose to human health has fueled research focused on their pathophysiology and toxicology, yet many of their fundamental properties - for example, their in vivo pharmacokinetics - remain poorly understood. In this investigation, we have harnessed positron emission tomography (PET) to track the in vivo fate of micro- and nanoplastics administered to mice intratracheally and intravenously. To this end, 1 μm and 20 nm diameter amine-functionalized polystyrene particles were modified with an isothiocyanate-bearing variant of desferrioxamine (DFO) and radiolabeled with the positron-emitting radiometal [89Zr]Zr4+. Both radioplastics - [89Zr]Zr-DFO-PS1000 and [89Zr]Zr-DFO-PS20 - were produced in ∼95% radiochemical yield and found to be >85% stable to demetallation over one week at 37 °C in human serum and simulated lung fluid. The incubation of [89Zr]Zr-DFO-PS1000 and [89Zr]Zr-DFO-PS20 with MH-S cells revealed that the majority of the former were phagocytosed by alveolar macrophages within 4 h, while the latter largely evaded consumption. Finally, the in vivo behavior of the radioplastics was interrogated in mice upon intravenous and intratracheal administration. PET imaging and biodistribution experiments revealed that the intravenously injected plastics accumulated primarily in the liver and spleen, yielding hepatic radioactivity concentrations of 101 ± 48 %ID/g and 92 ± 22 %ID/g at 168 h post-injection for [89Zr]Zr-DFO-PS1000 and [89Zr]Zr-DFO-PS20, respectively. In contrast, the mice that received the radioplastics via intratracheal installation displayed the highest uptake in the lungs at the end of one week: 4 ± 2 %ID/g for [89Zr]Zr-DFO-PS1000 and 32 ± 6 %ID/g for [89Zr]Zr-DFO-PS20. Ultimately, this work illustrates the critical role that the route of exposure plays in the bioaccumulation of plastic particles, reveals that size dramatically influences the pulmonary retention of inhaled particles, and underscores the value of PET imaging as a tool for studying the pharmacokinetics of environmental pollutants.

Nano polystyrene induced changes in anxiety and learning behaviour are mediated through oxidative stress and gene disturbance in mouse brain regions

It is widely reported now that nanoplastic particles have potential neurotoxic effects and may disturb central nervous system (CNS) function. However, the mechanism behind these toxic effects still needs to be elucidated. In the current study, we investigated the effects of polystyrene nanoplastics (PS-NPs) on changes in learning, memory, and anxiety-related behavior in mice based on some selected biochemical, molecular, and histopathological changes in three important brain regions (Cortex, Hypothalamus, and Hippocampus). Male mice were orally administered daily with two doses of 50 nm PS-NPs (0.2 mg/ml and 1 mg/ml) for 8 weeks. We observed decreased expression of neurotransmitter-related genes (VAChT, GAD, and SYP) in the cortex, hypothalamus, and hippocampus areas of the mouse brain. Other biochemical variables including, antioxidant enzymes, biomarkers for oxidative stress, and acetylcholinesterase activity showed significant alterations in all three brain regions. Molecular and neurochemical data thus suggest significant neurobehavioral changes following sub-chronic exposure to PS-NPs which may lead to enhanced anxiety-related and spatial learning and memory-related impairments by affecting limbic areas of the brain.

Application of spectrochemical analysis with chemometrics to profile biochemical alterations in nanoplastic-exposed HepG2 cells

Humans are routinely exposed to nanoplastics (NPs) in various ways, and this exposure presents a significant health risk. Nevertheless, there remain gaps in our knowledge, particularly in the mechanisms of toxicity of NPs with different surface charges at very low environmental concentrations. Herein, a spectrochemical approach was used to profile the cytotoxicity of NPs with different surface charges in HepG2 cells. It was found that all three NPs can cause some biomolecular alterations in cells, affecting cellular lipids, proteins, amino acids, and genetic material. Of these, PS and PS-COOH led to a non-linear dose-response, which may be related to a biphasic dose-response, whereas PS-NH2 led to a linear dose-response with a gradual increase in toxicity with increasing exposure concentration. In addition, the spectroscopic results showed that surface modifications led to cellular biochemical changes and caused adverse biological effects, with PS-NH2 exhibiting higher toxicity compared to PS or PS-COOH along with an inhibition of cell proliferation. Surprisingly PS-COOH, although considered the least toxic NP, appears to cause DNA damage. Overall, the toxic effects of different surface-modified NPs in cells were detected for the first time by applying spectrochemical techniques, and these findings provide important data towards understanding the emerging widespread environmental pollution of NPs and their effects on humans.

Recent innovations in microplastics and nanoplastics removal by coagulation technique: Implementations, knowledge gaps and prospects

Recently, microplastics (MPs) and nanoplastics (NPs) contamination is a worldwide problem owing to the immense usage of plastic commodities. Thus, the environmental risks by MPs and NPs demand the application of innovative, efficient, and sustainable technologies to control the pollution of plastic particles. Regarding this, numerous technologies, including adsorption, coagulation, filtration, bioremediation, chemical precipitation, and photocatalysis, have been engaged to eradicate MPs and NPs from contaminated waters. However, the coagulation technique is getting much attention owing to its simplicity, higher removal performance, low carbon footprint, and low operational and maintenance cost. Therefore, this paper has been designed to critically summarize the recent innovations on the application of coagulation process to eradicate MPs and NPs from both synthetic and real sewage. More importantly, the effect of pertinent factors, including characteristics of coagulants, MPs/NPs, and environmental medium on the elimination performances and mechanisms of MPs/NPs have been critically investigated. Further, the potential of coagulation technology in eliminating MPs and NPs from real sewage has been critically elucidated for the first time, for better execution of this technique at commercial levels. Finally, this critical review also presents current research gaps and future outlooks for the improvement of coagulation process for eradicating MPs and NPs from water and real sewage. Overall, the current review will offer valuable knowledge to scientists in selecting a suitable technique for controlling plastic pollution.

Self-reported behaviours and measures related to plastic waste reduction: European citizens' perspective

Consumer attitudes and behaviour regarding consumption of plastic goods and proper waste management are of importance for reducing plastic and microplastic (MP) pollution. Therefore, based on Eurobarometer survey, this study aims to analyse European attitudes and behaviour related to plastic pollution reduction. Europeans acknowledge marine and river pollution as important environmental problems and are worried about plastics and MP environmental impacts. However, this does not translate into related plastic reduction behaviours. Regression analysis show that analysed behaviours are likely to be undertaken by women, younger, with higher incomes respondents and by those who express higher worry about plastic and MP environmental impacts. Industry and big companies are seen as having the main role in reducing plastic waste and littering, chargers for single use plastics being less important. Respondents also stress the role of education. Hence, focus on concrete steps to reduce plastic waste, highlighting the interaction of individual actions and environment should be given.

Molecular Imaging, Radiochemistry, and Environmental Pollutants

The worldwide proliferation of persistent environmental pollutants is accelerating at an alarming rate. Not surprisingly, many of these pollutants pose a risk to human health. In this review, we examine recent literature in which molecular imaging and radiochemistry have been harnessed to study environmental pollutants. Specifically, these techniques offer unique ways to interrogate the pharmacokinetic profiles and bioaccumulation patterns of pollutants at environmentally relevant concentrations, thereby helping to determine their potential health risks.

Immunodysregulatory potentials of polyethylene or polytetrafluorethylene microplastics to mice subacutely exposed via intragastric intubation

Microplastics (MPs) have been recently recognized as posing a risk to human health. The adverse health effects of MP exposure have been recently reported, especially via the oral exposure route. The present study investigated whether subacute (4 week) exposure to polyethylene (PE) or polytetrafluorethylene (PTFE) MPs via gastric intubation caused immunotoxicity. Two different sizes of PE MPs (6.2 or 27.2 μm) and PTFE MPs (6.0 or 30.5 μm) were administered to 6-week-old mice of both sexes at 0 (corn oil vehicle control), 500, 1000, or 2000 mg/kg/day (n = 4/group). No significant differences were observed between groups in the major thymic or splenic immune cell populations, including thymic CD4+, CD8+, CD4+/CD8+ T lymphocytes, and splenic helper T cells, cytotoxic T cells, and B cells. The ratio of interferon-gamma (IFNγ) to interleukin-4 (IL-4) in culture supernatants from polyclonally activated splenic mononuclear cells ex vivo (48 h) was dose-dependently decreased in female mice that received small- and large-size PTFE MPs. The IFNγ/IL-4 ratio was also decreased in the female mice dosed with large-size PE MPs. The serum IgG2a/IgG1 ratio was dose-dependently increased in male and female animals dosed with small-size PE MPs, in female animals dosed with large-size PTFE MPs, and in male animals dosed with small-size PTFE MPs. The present study implies that immune functions could be affected in animals exposed to MPs via gastric intubation. These effects are dependent on MP size, MP dose, MP polymer type, and mouse sex. Further investigations with longer exposure periods could be necessary to more clearly define the immunotoxic effects of MPs.

Supplementary Information

The online version contains supplementary material available at 10.1007/s43188-023-00172-6.

Do drinking water plants retain microplastics? An exploratory study using Raman micro-spectroscopy

The retainment of microplastics (MPs) down to 1 μm by a Danish drinking water plant fed with groundwater was quantified using Raman micro-spectroscopy (μRaman). The inlet and outlet were sampled in parallel triplicates over five consecutive days of normal activity. For each triplicate, approximately 1 m³ of drinking water was filtered with a custom-made device employing 1 μm steel filters. The MP abundance was expressed as MP counts per liter (N/L) and MP mass per liter (pg/L), the latter being estimated from the morphological parameters provided by the μRaman analysis. Hence the treated water held on average 1.4 MP counts/L, corresponding to 4 pg/L. The raw water entering the sand filters held a higher MP abundance, and the overall efficiency of the treatment was 43.2% in terms of MP counts and 75.1% in terms of MP mass. The reason for the difference between count-based and mass-based efficiencies was that 1-5 μm MP were retained to a significantly lower degree than larger ones. Above 10 μm, 79.6% of all MPs were retained by the filters, while the efficiency was only 41.1% below 5 μm. The MP retainment was highly variable between measurements, showing an overall decreasing tendency over the investigated period. Therefore, the plastic elements of the plant (valves, sealing components, etc.) likely released small-sized MPs due to the mechanical stress experienced during the treatment. The sub-micron fraction (0.45-1 μm) of the samples was also qualitatively explored, showing that nanoplastics (NPs) were present and that at least part hereof could be detected by μRaman.

Microplastic pollution in the Himalayas: Occurrence, distribution, accumulation and environmental impacts

Microplastics have been reported from various ecosystems including lakes, ponds, wetlands, mountains, and forests globally. Recent research works showed microplastic deposition and accumulation in the Himalayan mountains and adjoining ecosystems, rivers and streams. Fine particles of microplastic originating from different anthropogenic sources can travel long distances, even upwards (altitudinally) through atmospheric transport and can pollute remote and pristine locations situated in the Himalayas. Precipitation also plays a vital role in influencing deposition and fallout of microplastics in the Himalayas. Microplastics can be trapped in the snow in glaciers for a long time and can be released into freshwater rivers by snow melting. Microplastic pollution in Himalayan rivers such as the Ganga, Indus, Brahmaputra, Alaknanda, and Kosi has been researched on both the upper and lower catchments. Additionally, Himalayan region draws many domestic and international tourists throughout the year, resulting in generation of massive and unmanageable volume of plastics wastes and finally ending up in the open landscapes covering forests, river streams and valley. Fragmentation of these plastic wastes can lead to microplastic formation and accumulation in the Himalayas. This paper discusses and explains occurrence and distribution of microplastics in the Himalayan landscapes, possible adverse effects of microplastic on local ecosystems and human population and policy intervention needed to mitigate microplastic pollution in the Himalayas. A knowledge gap was noticed regarding the fate of microplastics in the freshwater ecosystems and their control mechanisms in the Indian Himalayas. Regulatory approaches for microplastics management in the Himalayas sit within the broader plastics/solid waste management and can be implemented effectively by following integrated approaches.

Atmospheric microplastic and nanoplastic: The toxicological paradigm on the cellular system

The increasing demand for plastic in our daily lives has led to global plastic pollution. The improper disposal of plastic has resulted in a massive amount of atmospheric microplastics (MPs), which has further resulted in the production of atmospheric nanoplastics (NPs). Because of its intimate relationship with the environment and human health, microplastic and nanoplastic contamination is becoming a problem. Because microplastics and nanoplastics are microscopic and light, they may penetrate deep into the human lungs. Despite several studies demonstrating the abundance of microplastics and nanoplastics in the air, the potential risks of atmospheric microplastics and nanoplastics remain unknown. Because of its small size, atmospheric nanoplastic characterization has presented significant challenges. This paper describes sampling and characterization procedures for atmospheric microplastics and nanoplastics. This study also examines the numerous harmful effects of plastic particles on human health and other species. There is a significant void in research on the toxicity of airborne microplastics and nanoplastics upon inhalation, which has significant toxicological potential in the future. Further study is needed to determine the influence of microplastic and nanoplastic on pulmonary diseases.

Effects of microplastics in aquatic environments on inflammatory bowel disease

The incidence of inflammatory bowel disease (IBD) has been increasing in recent years, particularly in newly industrialized nations. Environmental factors have been identified as playing a crucial role in IBD pathogenesis. Microplastics (MPs), a novel class of environmental pollutants, are a significant global pollution concern. MPs are found in almost all aquatic environments. MPs in the environment may pose health risks, specifically concerning the intestinal system, due to prolonged exposure through the consumption of aquatic foods and drinking water. In this review, we aimed to provide a comprehensive overview of the current knowledge on the impact of MPs in water resources on the occurrence and progression of IBD. Our systematic analysis of in vitro and in vivo studies found that MPs induce intestinal barrier dysfunction, imbalance in the intestinal microbiome, and metabolic abnormalities, ultimately leading to IBD. In addition, MP exposure causes greater harm to individuals with preexisting gastrointestinal disorders than those without them. Our analysis of this literature review highlights the need for further research to improve the understanding of the complex relationship between MP exposure and IBD.

NLRP3 inflammasome as a sensor of micro- and nanoplastics immunotoxicity

Micro- and nanoplastics (MNPs) are emerging pollutants with scarcely investigated effects on human innate immunity. If they follow a similar course of action as other, more thoroughly investigated particulates, MNPs may penetrate epithelial barriers, potentially triggering a cascade of signaling events leading to cell damage and inflammation. Inflammasomes are intracellular multiprotein complexes and stimulus-induced sensors critical for mounting inflammatory responses upon recognition of pathogen- or damage-associated molecular patterns. Among these, the NLRP3 inflammasome is the most studied in terms of activation via particulates. However, studies delineating the ability of MNPs to affect NLRP3 inflammasome activation are still rare. In this review, we address the issue of MNPs source and fate, highlight the main concepts of inflammasome activation via particulates, and explore recent advances in using inflammasome activation for assessment of MNP immunotoxicity. We also discuss the impact of co-exposure and MNP complex chemistry in potential inflammasome activation. Development of robust biological sensors is crucial in order to maximize global efforts to effectively address and mitigate risks that MNPs pose for human health.

Mechanism of nanoplastics capture by jellyfish mucin and its potential as a sustainable water treatment technology

The accumulation of nanoplastics (NPs) in the environment has raised concerns about their impact on human health and the biosphere. The main aim of this study is to understand the mechanism that governs the capture of NPs by jellyfish mucus extracted from the jellyfish Aurelia sp. (A.a.) and compare the capture/removal efficiency to that of conventional coagulants and mucus from other organisms. The efficacy of A.a mucus to capture polystyrene and acrylic NPs (∼100 nm) from spiked wastewater treatment plant (WWTP) effluent was evaluated. The mucus effect on capture kinetics and destabilization of NPs of different polymer compositions, sizes and concentrations was quantified by means of fluorescent NPs, dynamic light scattering and zeta potential measurements and visualized by scanning electron microscopy. A dosing of A.a. mucus equivalent to protein concentrations of ∼2-4 mg L^-1 led to a rapid change in zeta potential from a baseline of -30 mV to values close to 0 mV, indicating a marked change from a stable to a non-stable dispersion leading to a rapid (<10 min) and significant removal of NPs (60 %-90 %) from a stable suspension. The A.a. mucus outperformed all other mucus types (0-37 %) and coagulants (0 %-32 % for ferric chloride; 23-40 % for poly aluminum chlorohydrate), highlighting the potential for jellyfish mucus to be used as bio-flocculant. The results indicate a mucus-particle interaction consisting of adsorption-bridging and "mesh" filtration. Further insight is provided by carbohydrate composition and protein disruption analysis. Total protein disruption resulted in a complete loss of the A.a. mucus capacity to capture NPs, while the breaking of disulfide bonds and protein unfolding resulted in improved capture capacity. The study demonstrates that natural jellyfish mucin can capture and remove NPs in water and wastewater treatment systems more efficiently than conventional coagulants, highlighting the potential for development of a new type of bio-flocculant.

Radiolabelling and in vivo radionuclide imaging tracking of emerging pollutants in environmental toxicology: A review

Emerging pollutants (EPs) have become a global concern, attracting tremendous attention because of serious threats to human and animal health. EP diversity emanates from their behaviour and ability to enter the body via multiple pathways and exhibit completely different distribution, transport, and excretion. To better understand the in vivo behaviour of EPs, we reviewed radiolabelling and in vivo radionuclide imaging tracking of various EPs, including micro- and nano-plastics, perfluoroalkyl substances, metal oxides, pharmaceutical and personal care products, and so on. Because this accurate and quantitative imaging approach requires the labelling of radionuclides onto EPs, the main strategies for radiolabelling were reviewed, such as synthesis with radioactive precursors, element exchange, proton beam activation, and modification. Spatial and temporal biodistribution of various EPs was summarised in a heat map, revealing that the absorption, transport, and excretion of EPs are markedly related to their type, size, and pathway into the body. These findings implicate the potential toxicity of diverse EPs in organs and tissues. Finally, we discussed the potential and challenges of radionuclide imaging tracking of EPs, which can be considered in future EPs studies.

Polystyrene microplastics significantly facilitate influenza A virus infection of host cells

Microplastics (MPs) are emerging pollutants which exist in various environments and pose a potential threat to human health. However, the effect of MP on respiratory pathogens-infected organisms is unknown. In order to explore the effect of MP on respiratory pathogen infection, we studied the effect of polystyrene microplastics (PS) on influenza A virus (IAV)-infected A549 cells. Western blot, qPCR, and viral plaque assay demonstrated that PS could promote IAV infection. Further study by bioluminescence imaging showed that a large number of IAV could be enriched on PS and entered cells through endocytosis. Meanwhile, the expression of IFITM3 in cells was significantly reduced. In addition, our results showed that PS down-regulated IRF3 and its active form P-IRF3 by down-regulating RIG-I and inhibiting TBK1 phosphorylation activation, which then significantly reduced IFN-β expression and affected the cellular innate antiviral immune system. Taken together, our results indicate the potential threat of MPs to respiratory diseases caused by IAV and provide new insights into human health protection.

Atmospheric microplastics: exposure, toxicity, and detrimental health effects

Microplastics (MPs) are micro-particulate pollutants present in all environments whose ubiquity leads humans to unavoidable exposure. Due to low density, MPs also accumulate in the atmosphere, where they are easily transported worldwide and come into direct contact with the human body by inhalation or ingestion, causing detrimental health effects. This literature review presents the sources of atmospheric MPs pollution, transport routes, physicochemical characteristics, and environmental interactions. The document also explains the implications for human health and analyzes the risk of exposure based on the potential toxicity and the concentration in the atmosphere. MPs' toxicity lies in their physical characteristics, chemical composition, environmental interactions, and degree of aging. The abundance and concentration of these microparticles are associated with nearby production sources and their displacement in the atmosphere. The above elements are presented in an integrated way to facilitate a better understanding of the associated risk. The investigation results encourage the development of future research that delves into the health implications of exposure to airborne MPs and raises awareness of the risks of current plastic pollution to promote the establishment of relevant mitigation policies and procedures.

The effect and a mechanistic evaluation of polystyrene nanoplastics on a mouse model of type 2 diabetes

Nanoplastics have become ubiquitous in the global environment and have attracted increasing attention. However, whether there is an influence between exposure to nanoplastics and diabetes is unclear. To determine the effects of exposure to Polystyrene nanoplastics (PS-NPs) and evaluate the underlying mechanisms, mice were orally exposed to PS-NPs at dosages of 1, 10, 30 mg/kg/day for 8 weeks, alone or combined with a high fat diet and streptozocin (STZ) injection. Our data showed that exposure to 30 mg/kg/day PS-NPs alone induced a significant increase in blood glucose, glucose intolerance and insulin resistance. Combined with a high fat diet and STZ injection, PS-NPs exposure markedly aggravated oxidative stress, glucose intolerance, insulin tolerance and insulin resistance, and induced lesions in the liver and pancreas. PS-NPs exposure could decrease the phosphorylation of AKT and GSK3β, and treatment with SC79, a selective AKT activator, could increase the level of AKT and GSK3β phosphorylation, effectively alleviating the increase in ROS levels in the liver or pancreas, and slightly attenuating the increase in fasting blood glucose levels and insulin resistance induced by PS-NPs exposure. This showed that exposure to PS-NPs aggravated type 2 diabetes and the underlying mechanism partly involved in the inhibition of AKT/GSK3β phosphorylation.

Alteration in Wnt signaling mediates induction of transgenerational toxicity of polystyrene nanoplastics in C. elegans

Polystyrene nanoparticles (PS-NPs) have a potential toxicity on offspring after the exposure. However, the molecular basis for PS-NP in inducing transgenerational toxicity remains largely unknown. In this study, the role and the underlying mechanism of germline Wnt signaling in regulating transgenerational toxicity of PS-NPs were determined using an in vivo animal model of Caenorhabditis elegans. Exposure to PS-NP (1-100 μg/L) increased expression of Wnt ligand LIN-44 and decreased expression of Wnt receptor MIG-1. After the exposure, the transgenerational PS-NP toxicity on locomotion behavior and brood size were inhibited in lin-44(RNAi) nematodes, while enhanced in mig-1(RNAi) nematodes. The resistance to transgenerational PS-NP toxicity induced by RNAi of lin-44 in P0 generation (P0-G) was inhibited by RNAi of mig-1 in F1-G. In addition, after PS-NP exposure, germline RNAi of lin-44 at P0-G could increase the mig-1 expression in F1-G. Exposure to PS-NP (1-100 μg/L) further decreased expressions of Dishevelled proteins of DSH-1/2, increased APC complex component APR-1, and decreased expression of BAR-1/β-catenin. Meanwhile, transgenerational PS-NP toxicity was enhanced by RNAi of dsh-1, dsh-2, or bar-1 and inhibited by RNAi of apr-1, suggesting that the DSH-1/2-APR-1-BAR-1 signaling cascade acted downstream of Wnt receptor MIG-1 to control transgenerational PS-NP toxicity. Moreover, BAR-1 acted upstream of DVE-1 to activate mitochondrial unfolded protein response (mt UPR) against the transgenerational PS-NP toxicity. Our data highlights the potential link between alteration in germline Wnt signaling and induction of transgenerational nanoplastic toxicity in organisms.

Nanoplastics cause transgenerational toxicity through inhibiting germline microRNA mir-38 in C. elegans

Nanoplastic exposure potentially caused the induction of transgenerational toxicity. Nevertheless, the molecular basis for nanoplastic exposure-induced transgenerational toxicity remains largely unclear. Using Caenorhabditis elegans as an animal model, we examined the role of germline microRNA (miRNA) mir-38 in regulating the transgenerational toxicity of polystyrene nanoparticles (PS-NPs). After the exposure, 1-100 μg/L PS-NP decreased expression of germline mir-38. Meanwhile, germline mir-38 overexpression conferred a resistance to transgenerational PS-NP toxicity, which suggested that the decrease in germline mir-38 mediated the induction of transgenerational PS-NP toxicity. In the germline, mir-38 regulated transgenerational PS-NP toxicity by inhibiting activity of downstream targets (NDK-1, NHL-2, and WRT-3). Among these three downstream targets, germline NDK-1 further controlled transgenerational PS-NP toxicity by suppressing the function of KSR-1/2, two kinase suppressors of Ras. Therefore, in the germline, the decrease in mir-38 mediated induction of transgenerational PS-NP toxicity by at least inhibiting signaling cascade of NDK-1-KSR-1/2 in nematodes. The findings in this study are helpful for providing relevantly molecular endpoints to assess potential transgenerational toxicity of nanoplastics.

Assessment, characterization, and quantification of microplastics from river sediments

Microplastic (MP), as a pollutant, is currently posing a biological hazard to the aquatic environment. The study aims to isolate, quantify, and characterize the MP pollutants in sediment samples from 14 study sites at Kaveri River, Killa Chinthamani, Tiruchirappalli, South India. With Sediment-MP Isolation (SMI) unit, density separation was done with a hydrogen peroxide solution. Four forms of MPs namely, fragments, films, foams, and fibers with orange, white, green, and saffron red were observed. The plenitude and distribution of four forms of MPs and natural substrates were geometrically independent, with large amounts of microfragments within the research region accounting for 79.72% variation by Principal Component Analysis. FT-IR analyses of MPs showed the presence of polyamide, polyethylene, polyethylene glycol, polyethylene terephthalate, polypropylene, and polystyrene. Additionally, the scanning electron microscopic analysis revealed that the MPs have differential surface morphology with rough surfaces, porous structures, fissures, and severe damage. Most MPs comprised Si, Mg, Cu, and Al, according to energy dispersive X-ray analyses. The combined SMI, instrumental analyses and evaluation (heat map) of MPs in river sediments help assess contamination levels and types of MPs. The findings might provide an insight into the status of MPs in Kavery River sediments that could help in formulating regulations for MPs reduction and contamination in rivers eventually to protect the environment.