Microtubule-Mediated Wall Anisotropy Contributes to Leaf Blade Flattening

Arabidopsis floral buds are locked through stress-induced sepal tip curving

In most plant species, sepals-the outermost floral organs-provide a protective shield for reproductive organs. How the floral bud becomes sealed is unknown. In Arabidopsis, we identified a small region at the sepal tip that is markedly curved inward early on and remains curved even after anthesis. Through modelling and quantitative growth analysis, we find that this hook emerges from growth arrest at the tip at a stage when cortical microtubules align with growth-derived tensile stress. Depolymerizing microtubules specifically at young sepal tips hindered hook formation and resulted in open floral buds. Mutants with defective growth pattern at the tip failed to curve inwards, whereas mutants with enhanced alignment of cortical microtubules at the tip exhibited a stronger hook. We propose that floral buds are locked due to a stress-derived growth arrest event curving the sepal tip and forming a rigid hook early on during flower development.

A transient radial cortical microtubule array primes cell division in Arabidopsis

Although the formation of new walls during plant cell division tends to follow maximal tensile stress direction, analyses of individual cells over time reveal a much more variable behavior. The origin of such variability as well as the exact role of interphasic microtubule behavior before cell division have remained mysterious so far. To approach this question, we took advantage of the Arabidopsis stem, where the tensile stress pattern is both highly anisotropic and stable. Although cortical microtubules (CMTs) generally align with maximal tensile stress, we detected a specific time window, ca. 3 h before cell division, where cells form a radial pattern of CMTs. This microtubule array organization preceded preprophase band (PPB) formation, a transient CMT array predicting the position of the future division plane. It was observed under different growth conditions and was not related to cell geometry or polar auxin transport. Interestingly, this cortical radial pattern correlated with the well-documented increase of cytoplasmic microtubule accumulation before cell division. This radial organization was prolonged in cells of the trm678 mutant, where CMTs are unable to form a PPB. Whereas division plane orientation in trm678 is noisier, we found that cell division symmetry was in contrast less variable between daughter cells. We propose that this "radial step" reflects a trade-off in robustness for two essential cell division attributes: symmetry and orientation. This involves a "reset" stage in G2, where an increased cytoplasmic microtubule accumulation transiently disrupts CMT alignment with tissue stress.

Spatiotemporally distinct responses to mechanical forces shape the developing seed of Arabidopsis

Organ morphogenesis depends on mechanical interactions between cells and tissues. These interactions generate forces that can be sensed by cells and affect key cellular processes. However, how mechanical forces, together with biochemical signals, contribute to the shaping of complex organs is still largely unclear. We address this question using the seed of Arabidopsis as a model system. We show that seeds first experience a phase of rapid anisotropic growth that is dependent on the response of cortical microtubule (CMT) to forces, which guide cellulose deposition according to shape-driven stresses in the outermost layer of the seed coat. However, at later stages of development, we show that seed growth is isotropic and depends on the properties of an inner layer of the seed coat that stiffens its walls in response to tension but has isotropic material properties. Finally, we show that the transition from anisotropic to isotropic growth is due to the dampening of cortical microtubule responses to shape-driven stresses. Altogether, our work supports a model in which spatiotemporally distinct mechanical responses control the shape of developing seeds in Arabidopsis.

Male Germ Cell Specification in Plants

Germ cells (GCs) serve as indispensable carriers in both animals and plants, ensuring genetic continuity across generations. While it is generally acknowledged that the timing of germline segregation differs significantly between animals and plants, ongoing debates persist as new evidence continues to emerge. In this review, we delve into studies focusing on male germ cell specifications in plants, and we summarize the core gene regulatory circuits in germ cell specification, which show remarkable parallels to those governing meristem homeostasis. The similarity in germline establishment between animals and plants is also discussed.

Spinach genomes reveal migration history and candidate genes for important crop traits

Spinach (Spinacia oleracea) is an important leafy crop possessing notable economic value and health benefits. Current genomic resources include reference genomes and genome-wide association studies. However, the worldwide genetic relationships and the migration history of the crop remained uncertain, and genome-wide association studies have produced extensive gene lists related to agronomic traits. Here, we re-analysed the sequenced genomes of 305 cultivated and wild spinach accessions to unveil the phylogeny and history of cultivated spinach and to explore genetic variation in relation to phenotypes. In contrast to previous studies, we employed machine learning methods (based on Extreme Gradient Boosting, XGBoost) to detect variants that are collectively associated with agronomic traits. Variant-based cluster analyses revealed three primary spinach groups in the Middle East, Asia and Europe/US. Combining admixture analysis and allele-sharing statistics, migration routes of spinach from the Middle East to Europe and Asia are presented. Using XGBoost machine learning models we predict genomic variants influencing bolting time, flowering time, petiole color, and leaf surface texture and propose candidate genes for each trait. This study enhances our understanding of the history and phylogeny of domesticated spinach and provides valuable information on candidate genes for future genetic improvement of the crop.

Growth and tension in explosive fruit

Exploding seed pods of the common weed Cardamine hirsuta have the remarkable ability to launch seeds far from the plant. The energy for this explosion comes from tension that builds up in the fruit valves. Above a critical threshold, the fruit fractures along its dehiscence zone and the two valves coil explosively, ejecting the seeds. A common mechanism to generate tension is drying, causing tissues to shrink. However, this does not happen in C. hirsuta fruit. Instead, tension is produced by active contraction of growing exocarp cells in the outer layer of the fruit valves. Exactly how growth causes the exocarp tissue to contract and generate pulling force is unknown. Here we show that the reorientation of microtubules in the exocarp cell cortex changes the orientation of cellulose microfibrils in the cell wall and the consequent cellular growth pattern. We used mechanical modeling to show how tension emerges through growth due to the highly anisotropic orientation of load-bearing cellulose microfibrils and their effect on cell shape. By explicitly defining the cell wall as multi-layered in our model, we discovered that a cross-lamellate pattern of cellulose microfibrils further enhances the developing tension in growing cells. Therefore, the interplay of cell wall properties with turgor-driven growth enables the fruit exocarp to generate sufficient tension to power explosive seed dispersal.

Cell layer-specific expression of the homeotic MADS-box transcription factor PhDEF contributes to modular petal morphogenesis in petunia

Floral homeotic MADS-box transcription factors ensure the correct morphogenesis of floral organs, which are organized in different cell layers deriving from distinct meristematic layers. How cells from these distinct layers acquire their respective identities and coordinate their growth to ensure normal floral organ morphogenesis is unresolved. Here, we studied petunia (Petunia × hybrida) petals that form a limb and tube through congenital fusion. We identified petunia mutants (periclinal chimeras) expressing the B-class MADS-box gene DEFICIENS in the petal epidermis or in the petal mesophyll, called wico and star, respectively. Strikingly, wico flowers form a strongly reduced tube while their limbs are almost normal, while star flowers form a normal tube but greatly reduced and unpigmented limbs, showing that petunia petal morphogenesis is highly modular. These mutants highlight the layer-specific roles of PhDEF during petal development. We explored the link between PhDEF and petal pigmentation, a well-characterized limb epidermal trait. The anthocyanin biosynthesis pathway was strongly downregulated in star petals, including its major regulator ANTHOCYANIN2 (AN2). We established that PhDEF directly binds to the AN2 terminator in vitro and in vivo, suggesting that PhDEF might regulate AN2 expression and therefore petal epidermis pigmentation. Altogether, we show that cell layer-specific homeotic activity in petunia petals differently impacts tube and limb development, revealing the relative importance of the different cell layers in the modular architecture of petunia petals.

Microtubules as a signal hub for axon growth in response to mechanical force

Microtubules are highly polar structures and are characterized by high anisotropy and stiffness. In neurons, they play a key role in the directional transport of vesicles and organelles. In the neuronal projections called axons, they form parallel bundles, mostly oriented with the plus-end towards the axonal termination. Their physico-chemical properties have recently attracted attention as a potential candidate in sensing, processing and transducing physical signals generated by mechanical forces. Here, we discuss the main evidence supporting the role of microtubules as a signal hub for axon growth in response to a traction force. Applying a tension to the axon appears to stabilize the microtubules, which, in turn, coordinate a modulation of axonal transport, local translation and their cross-talk. We speculate on the possible mechanisms modulating microtubule dynamics under tension, based on evidence collected in neuronal and non-neuronal cell types. However, the fundamental question of the causal relationship between these mechanisms is still elusive because the mechano-sensitive element in this chain has not yet been identified.

Forces on and in the cell walls of living plants

Environmental influences and differential growth subject plants to mechanical forces. Forces on the whole plant resolve into tensile forces on its primary cell walls and both tensile and compression forces on the secondary cell wall layers of woody tissues. Forces on cell walls are further resolved into forces on cellulose microfibrils and the noncellulosic polymers between them. Many external forces on plants oscillate, with time constants that vary from seconds to milliseconds. Sound waves are a high-frequency example. Forces on the cell wall lead to responses that direct the oriented deposition of cellulose microfibrils and the patterned expansion of the cell wall, leading to complex cell and tissue morphology. Recent experiments have established many of the details of which cell wall polymers associate with one another in both primary and secondary cell walls, but questions remain about which of the interconnections are load bearing, especially in primary cell walls. Direct cellulose-cellulose interactions appear to have a more important mechanical role than was previously thought, and some of the noncellulosic polymers may have a role in keeping microfibrils apart rather than cross-linking them as formerly envisaged.

The dynamics and biophysics of shape formation: Common themes in plant and animal morphogenesis

The emergence of tissue form in multicellular organisms results from the complex interplay between genetics and physics. In both plants and animals, cells must act in concert to pattern their behaviors. Our understanding of the factors sculpting multicellular form has increased dramatically in the past few decades. From this work, common themes have emerged that connect plant and animal morphogenesis-an exciting connection that solidifies our understanding of the developmental basis of multicellular life. In this review, we will discuss the themes and the underlying principles that connect plant and animal morphogenesis, including the coordination of gene expression, signaling, growth, contraction, and mechanical and geometric feedback.

Pick a side: Integrating gene expression and mechanical forces to polarize aerial organs

How organs acquire their shapes is a central question in developmental biology. In plants, aerial lateral organs such as leaves initiate at the flanks of the growing meristem as dome-shaped primordia. These simple structures then grow out along multiple polarity axes to achieve a dizzying array of final shapes. Many of the hormone signaling pathways and genetic interactions that influence growth along these axes have been identified in the past few decades. Open questions include how and when initial gene expression patterns are set in organ primordia, and how these patterns are translated into the physical outcomes observed at the cellular and tissue levels. In this review, we highlight recent studies into the auxin signaling and gene expression dynamics that govern adaxial-abaxial patterning, and the contributions of mechanical forces to the development of flattened structures.

Microtubule-associated protein SlMAP70 interacts with IQ67-domain protein SlIQD21a to regulate fruit shape in tomato

Tomato (Solanum lycopersicum) fruit shape is related to microtubule organization and the activity of microtubule-associated proteins (MAPs). However, insights into the mechanism of fruit shape formation from a cell biology perspective remain limited. Analysis of the tissue expression profiles of different microtubule regulators revealed that functionally distinct classes of MAPs, including members of the plant-specific MICROTUBULE-ASSOCIATED PROTEIN 70 (MAP70) and IQ67 DOMAIN (IQD, also named SUN in tomato) families, are differentially expressed during fruit development. SlMAP70-1-3 and SlIQD21a are highly expressed during fruit initiation, which relates to the dramatic microtubule pattern rearrangements throughout this developmental stage of tomato fruits. Transgenic tomato lines overexpressing SlMAP70-1 or SlIQD21a produced elongated fruits with reduced cell circularity and microtubule anisotropy, while their loss-of-function mutants showed the opposite phenotype, harboring flatter fruits. Fruits were further elongated in plants coexpressing both SlMAP70-1 and SlIQD21a. We demonstrated that SlMAP70s and SlIQD21a physically interact and that the elongated fruit phenotype is likely due to microtubule stabilization induced by the SlMAP70-SlIQD21a interaction. Together, our results identify SlMAP70 proteins and SlIQD21a as important regulators of fruit elongation and demonstrate that manipulating microtubule function during early fruit development provides an effective approach to alter fruit shape.

Regiospecific Cellulose Orientation and Anisotropic Mechanical Property in Plant Cell Walls

Cellulose microfibrils (CMFs) are a major load-bearing component in plant cell walls. Thus, their structures have been studied extensively with spectroscopic and microscopic characterization methods, but the findings from these two approaches were inconsistent, which hampers the mechanistic understanding of cell wall mechanics. Here, we report the regiospecific assembly of CMFs in the periclinal wall of plant epidermal cells. Using sum frequency generation spectroscopic imaging, we found that CMFs are highly aligned in the cell edge region where two cells form a junction, whereas they are mostly isotropic on average throughout the wall thickness in the flat face region of the epidermal cell. This subcellular-level heterogeneity in the CMF alignment provided a new perspective on tissue-level anisotropy in the tensile modulus of cell wall materials. This finding also has resolved a previous contradiction between the spectroscopic and microscopic imaging studies, which paves a foundation for better understanding of the cell wall architecture, especially structure-geometry relationships.

Stiffness transitions in new walls post-cell division differ between Marchantia polymorpha gemmae and Arabidopsis thaliana leaves

Plant morphogenesis is governed by the mechanics of the cell wall-a stiff and thin polymeric box that encloses the cells. The cell wall is a highly dynamic composite material. New cell walls are added during cell division. As the cells continue to grow, the properties of cell walls are modulated to undergo significant changes in shape and size without breakage. Spatial and temporal variations in cell wall mechanical properties have been observed. However, how they relate to cell division remains an outstanding question. Here, we combine time-lapse imaging with local mechanical measurements via atomic force microscopy to systematically map the cell wall's age and growth, with their stiffness. We make use of two systems, Marchantia polymorpha gemmae, and Arabidopsis thaliana leaves. We first characterize the growth and cell division of M. polymorpha gemmae. We then demonstrate that cell division in M. polymorpha gemmae results in the generation of a temporary stiffer and slower-growing new wall. In contrast, this transient phenomenon is absent in A. thaliana leaves. We provide evidence that this different temporal behavior has a direct impact on the local cell geometry via changes in the junction angle. These results are expected to pave the way for developing more realistic plant morphogenetic models and to advance the study into the impact of cell division on tissue growth.

Cell signaling in the shoot apical meristem

Distinct from animals, plants maintain organogenesis from specialized tissues termed meristems throughout life. In the shoot apex, the shoot apical meristem (SAM) produces all aerial organs, such as leaves, from its periphery. For this, the SAM needs to precisely balance stem cell renewal and differentiation, which is achieved through dynamic zonation of the SAM, and cell signaling within functional domains is key for SAM functions. The WUSCHEL-CLAVATA feedback loop plays a key role in SAM homeostasis, and recent studies have uncovered new components, expanding our understanding of the spatial expression and signaling mechanism. Advances in polar auxin transport and signaling have contributed to knowledge of the multifaceted roles of auxin in the SAM and organogenesis. Finally, single-cell techniques have expanded our understanding of the cellular functions within the shoot apex at single-cell resolution. In this review, we summarize the most up-to-date understanding of cell signaling in the SAM and focus on the multiple levels of regulation of SAM formation and maintenance.

RHO GTPase of plants regulates polarized cell growth and cell division orientation during morphogenesis

Cell polarity-broadly defined as the asymmetric distribution of cellular activities and subcellular components within a cell-determines the geometry of cell growth and division during development. RHO GTPase proteins regulate the establishment of cell polarity and are conserved among eukaryotes. RHO of plant (ROP) proteins are a subgroup of RHO GTPases that are required for cellular morphogenesis in plants. However, how ROP proteins modulate the geometry of cell growth and division during the morphogenesis of plant tissues and organs is not well understood. To investigate how ROP proteins function during tissue development and organogenesis, we characterized the function of the single-copy ROP gene of the liverwort Marchantia polymorpha (MpROP). M. polymorpha develops morphologically complex three-dimensional tissues and organs exemplified by air chambers and gemmae, respectively. Mprop loss-of-function mutants form defective air chambers and gemmae, indicating ROP function is required for tissue development and organogenesis. During air chamber and gemma development in wild type, the MpROP protein is enriched to sites of polarized growth at the cell surface and accumulates at the expanding cell plate of dividing cells. Consistent with these observations, polarized cell growth is lost and cell divisions are misoriented in Mprop mutants. We propose that ROP regulates both polarized cell growth and cell division orientation in a coordinated manner to orchestrate tissue development and organogenesis in land plants.

Mechano-chemical regulation of complex cell shape formation: Epidermal pavement cells-A case study

All plant cells are encased by walls, which provide structural support and control their morphology. How plant cells regulate the deposition of the wall to generate complex shapes is a topic of ongoing research. Scientists have identified several model systems, the epidermal pavement cells of cotyledons and leaves being an ideal platform to study the formation of complex cell shapes. These cells indeed grow alternating protrusions and indentations resulting in jigsaw puzzle cell shapes. How and why these cells adopt such shapes has shown to be a challenging problem to solve, notably because it involves the integration of molecular and mechanical regulation together with cytoskeletal dynamics and cell wall modifications. In this review, we highlight some recent progress focusing on how these processes may be integrated at the cellular level along with recent quantitative morphometric approaches.

Diversification of ranunculaceous petals in shape supports a generalized model for plant lateral organ morphogenesis and evolution

Peltate organs, such as the prey-capturing traps of carnivorous plants and nectary-bearing petals of ranunculaceous species, are widespread in nature and have intrigued and perplexed scientists for centuries. Shifts in the expression domains of adaxial/abaxial genes have been shown to control leaf peltation in some carnivorous plants, yet the mechanisms underlying the generation of other peltate organs remain unclear. Here, we show that formation of various peltate ranunculaceous petals was also caused by shifts in the expression domains of adaxial/abaxial genes, followed by differentiated regional growth sculpting the margins and/or other parts of the organs. By inducing parameters to specify the time, position, and degree of the shifts and growth, we further propose a generalized modeling system, through which various unifacial, bifacial, and peltate organs can be simulated. These results demonstrate the existence of a hierarchical morphospace system and pave the way to understand the mechanisms underlying plant organ diversification.

Anisotropic cell growth at the leaf base promotes age-related changes in leaf shape in Arabidopsis thaliana

Plants undergo extended morphogenesis. The shoot apical meristem (SAM) allows for reiterative development and the formation of new structures throughout the life of the plant. Intriguingly, the SAM produces morphologically different leaves in an age-dependent manner, a phenomenon known as heteroblasty. In Arabidopsis thaliana, the SAM produces small orbicular leaves in the juvenile phase, but gives rise to large elliptical leaves in the adult phase. Previous studies have established that a developmental decline of microRNA156 (miR156) is necessary and sufficient to trigger this leaf shape switch, although the underlying mechanism is poorly understood. Here we show that the gradual increase in miR156-targeted SQUAMOSA PROMOTER BINDING PROTEIN-LIKE transcription factors with age promotes cell growth anisotropy in the abaxial epidermis at the base of the leaf blade, evident by the formation of elongated giant cells. Time-lapse imaging and developmental genetics further revealed that the establishment of adult leaf shape is tightly associated with the longitudinal cell expansion of giant cells, accompanied by a prolonged cell proliferation phase in their vicinity. Our results thus provide a plausible cellular mechanism for heteroblasty in Arabidopsis, and contribute to our understanding of anisotropic growth in plants.

Revisiting the relationship between turgor pressure and plant cell growth

Growth is central to plant morphogenesis. Plant cells are encased in rigid cell walls, and they must overcome physical confinement to grow to specific sizes and shapes. Cell wall tension and turgor pressure are the main mechanical components impacting plant cell growth. Cell wall mechanics has been the focus of most plant biomechanical studies, and turgor pressure was often considered as a constant and largely passive component. Nevertheless, it is increasingly accepted that turgor pressure plays a significant role in plant growth. Numerous theoretical and experimental studies suggest that turgor pressure can be both spatially inhomogeneous and actively modulated during morphogenesis. Here, we revisit the pressure-growth relationship by reviewing recent advances in investigating the interactions between cellular/tissular pressure and growth.

Microtubule Regulation in Plants: From Morphological Development to Stress Adaptation

Microtubules (MTs) are essential elements of the eukaryotic cytoskeleton and are critical for various cell functions. During cell division, plant MTs form highly ordered structures, and cortical MTs guide the cell wall cellulose patterns and thus control cell size and shape. Both are important for morphological development and for adjusting plant growth and plasticity under environmental challenges for stress adaptation. Various MT regulators control the dynamics and organization of MTs in diverse cellular processes and response to developmental and environmental cues. This article summarizes the recent progress in plant MT studies from morphological development to stress responses, discusses the latest techniques applied, and encourages more research into plant MT regulation.

Patterned proliferation orients tissue-wide stress to control root vascular symmetry in Arabidopsis

Symmetric tissue alignment is pivotal to the functions of plant vascular tissue, such as long-distance molecular transport and lateral organ formation. During the vascular development of the Arabidopsis roots, cytokinins initially determine cell-type boundaries among vascular stem cells and subsequently promote cell proliferation to establish vascular tissue symmetry. Although it is unknown whether and how the symmetry of initially defined boundaries is progressively refined under tissue growth in plants, such boundary shapes in animal tissues are regulated by cell fluidity, e.g., cell migration and intercalation, lacking in plant tissues. Here, we uncover that cell proliferation during vascular development produces anisotropic compressive stress, smoothing, and symmetrizing cell arrangement of the vascular-cell-type boundary. Mechanistically, the GATA transcription factor HANABA-TARANU cooperates with the type-B Arabidopsis response regulators to form an incoherent feedforward loop in cytokinin signaling. The incoherent feedforward loop fine-tunes the position and frequency of vascular cell proliferation, which in turn restricts the source of mechanical stress to the position distal and symmetric to the boundary. By combinatorial analyses of mechanical simulations and laser cell ablation, we show that the spatially constrained environment of vascular tissue efficiently entrains the stress orientation among the cells to produce a tissue-wide stress field. Together, our data indicate that the localized proliferation regulated by the cytokinin signaling circuit is decoded into a globally oriented mechanical stress to shape the vascular tissue symmetry, representing a reasonable mechanism controlling the boundary alignment and symmetry in tissue lacking cell fluidity.

BrCWM Mutation Disrupted Leaf Flattening in Chinese Cabbage (Brassica rapa L. ssp. pekinensis)

Leaf flattening plays a vital role in the establishment of plant architecture, which is closely related to plant photosynthesis and, thus, influences the product yield and quality of Chinese cabbage. In this study, we used the doubled haploid line ‘FT’ of Chinese cabbage as the wild type for ethyl methanesulfonate (EMS) mutagenesis and obtained a mutant cwm with stably inherited compact and wrinkled leaves. Genetic analysis revealed that the mutated trait was controlled by a single recessive nuclear gene, Brcwm. Brcwm was preliminarily mapped to chromosome A07 based on bulked segregant RNA sequencing (BSR-seq) and fine-mapped to a 205.66 kb region containing 39 genes between Indel12 and Indel21 using SSR and Indel analysis. According to the whole-genome re-sequencing results, we found that there was only one nonsynonymous single nucleotide polymorphism (SNP) (C to T) within the target interval on exon 4 of BraA07g021970.3C, which resulted in a proline to serine amino acid substitution. The mutated trait co-segregated with the SNP. Quantitative reverse transcriptase polymerase chain reaction (qRT-PCR) revealed that BraA07g021970.3C expression was dramatically higher in ‘FT’ leaves than that in cwm leaves. BraA07g021970.3C is homologous to AT3G55000 encoding a protein related to cortical microtubule organization. A similar phenotype of dwarfism and wrinkled leaves was observed in the recessive homozygous mutant cwm-f1 of AT3G55000, and its T3 transgenic lines were restored to the Arabidopsis wild-type phenotype through ectopic overexpression of BraA07g021970.3C. These results verified that BraA07g021970.3C was the target gene essential for leaf flattening in Chinese cabbage.

Morphogenesis of leaves: from initiation to the production of diverse shapes

The manner by which plant organs gain their shape is a longstanding question in developmental biology. Leaves, as typical lateral organs, are initiated from the shoot apical meristem that harbors stem cells. Leaf morphogenesis is accompanied by cell proliferation and specification to form the specific 3D shapes, with flattened lamina being the most common. Here, we briefly review the mechanisms controlling leaf initiation and morphogenesis, from periodic initiation in the shoot apex to the formation of conserved thin-blade and divergent leaf shapes. We introduce both regulatory gene patterning and biomechanical regulation involved in leaf morphogenesis. How phenotype is determined by genotype remains largely unanswered. Together, these new insights into leaf morphogenesis resolve molecular chains of events to better aid our understanding.

Noninvasive Long-Term Imaging of the Cytoskeleton in Arabidopsis Seedlings

The preparation of biological samples, especially for live-cell microscopy, remains a major experimental challenge in the lab despite technological advances. In addition, high-resolution microscopy techniques require higher sample quality and uniformity, which is difficult to ensure during manual preparation while maintaining "ideal" growth conditions. In this protocol, we provide a way out by growing Arabidopsis thaliana seedlings directly in an imaging chamber, which eliminates invasive sample preparation directly before imaging. This method hinges on the precise placement of seeds into imaging chambers, which can be grown in conventional climate chambers. We detail three methods to grow hypocotyls, cotyledons, leaves, and roots for high-resolution and long-term imaging of the plant cytoskeleton. Furthermore, we show that the growth and development of seedlings inside the chambers can be externally manipulated by the addition of chemicals.

The mechanics of plant morphogenesis

Understanding the mechanism by which patterned gene activity leads to mechanical deformation of cells and tissues to create complex forms is a major challenge for developmental biology. Plants offer advantages for addressing this problem because their cells do not migrate or rearrange during morphogenesis, which simplifies analysis. We synthesize results from experimental analysis and computational modeling to show how mechanical interactions between cellulose fibers translate through wall, cell, and tissue levels to generate complex plant tissue shapes. Genes can modify mechanical properties and stresses at each level, though the values and pattern of stresses differ from one level to the next. The dynamic cellulose network provides elastic resistance to deformation while allowing growth through fiber sliding, which enables morphogenesis while maintaining mechanical strength.

Polar auxin transport modulates early leaf flattening

The flattened leaf form is an important adaptation for efficient photosynthesis, and the developmental process of flattened leaves has been intensively studied. Classic microsurgery studies in potato and tomato suggest that the shoot apical meristem (SAM) communicates with the leaf primordia to promote leaf blade formation. More recently, it was found that polar auxin transport (PAT) could mediate this communication. However, it is unclear how the expression of leaf patterning genes is tailored by PAT routes originating from SAM. By combining experimental observations and computer model simulations, we show that microsurgical incisions and local inhibition of PAT in tomato interfere with auxin transport toward the leaf margins, reducing auxin response levels and altering the leaf blade shape. Importantly, oval auxin responses result in the bipolar expression of SlLAM1 that determines leaf blade formation. Furthermore, wounding caused by incisions promotes degradation of SlREV, a known regulator of leaf polarity. Additionally, computer simulations suggest that local auxin biosynthesis in early leaf primordia could remove necessity for external auxin supply originating from SAM, potentially explaining differences between species. Together, our findings establish how PAT near emerging leaf primordia determines spatial auxin patterning and refines SlLAM1 expression in the leaf margins to guide leaf flattening.

Mechanosensing, from forces to structures

Sessile plants evolve diverse structures in response to complex environmental cues. These factors, in essence, involve mechanical stimuli, which must be sensed and coordinated properly by the plants to ensure effective growth and development. While we have accumulated substantial knowledge on plant mechanobiology, how plants translate mechanical information into three-dimensional structures is still an open question. In this review, we summarize our current understanding of plant mechanosensing at different levels, particularly using Arabidopsis as a model plant system. We also attempt to abstract the mechanosensing process and link the gaps from mechanical cues to the generation of complex plant structures. Here we review the recent advancements on mechanical response and transduction in plant morphogenesis, and we also raise several questions that interest us in different sections.

Spatiotemporal imaging clarifies leaf primordium patterning

The first step in organ morphogenesis is the subdivision of a primordium into discrete regions by patterning genes. Recently, Burian et al. used live imaging and cell-lineage tracing to illuminate early patterning events during the establishment of leaf primordium adaxial-abaxial (dorsoventral) polarity, which clarifies controversies in the field.

Differential growth dynamics control aerial organ geometry

How gene activities and biomechanics together direct organ shapes is poorly understood. Plant leaf and floral organs develop from highly similar initial structures and share similar gene expression patterns, yet they gain drastically different shapes later-flat and bilateral leaf primordia and radially symmetric floral primordia, respectively. We analyzed cellular growth patterns and gene expression in young leaves and flowers of Arabidopsis thaliana and found significant differences in cell growth rates, which correlate with convergence sites of phytohormone auxin that require polar auxin transport. In leaf primordia, the PRESSED-FLOWER-expressing middle domain grows faster than adjacent adaxial domain and coincides with auxin convergence. In contrast, in floral primordia, the LEAFY-expressing domain shows accelerated growth rates and pronounced auxin convergence. This distinct cell growth dynamics between leaf and flower requires changes in levels of cell-wall pectin de-methyl-esterification and mechanical properties of the cell wall. Data-driven computer model simulations at organ and cellular levels demonstrate that growth differences are central to obtaining distinct organ shape, corroborating in planta observations. Together, our study provides a mechanistic basis for the establishment of early aerial organ symmetries through local modulation of differential growth patterns with auxin and biomechanics.

Root twisting drives halotropism via stress-induced microtubule reorientation

Plants have evolved signaling mechanisms that guide growth away from adverse environments that can cause yield losses. Root halotropism is a sodium-specific negative tropism that is crucial for surviving and thriving under high salinity. Although root halotropism was discovered some years ago, the underlying molecular and cellular mechanisms remain unknown. Here, we show that abscisic acid (ABA)-mediated root twisting determines halotropism in Arabidopsis. An ABA-activated SnRK2 protein kinase (SnRK2.6) phosphorylates the microtubule-associated protein SP2L at Ser406, which induces a change in the anisotropic cell expansion at the root transition zone and is required for root twisting during halotropism. Salt stress triggers SP2L-mediated cortical microtubule reorientation, which guides cellulose microfibril patterns. Our findings thus outline the molecular mechanism of root halotropism and indicate that anisotropic cell expansion through microtubule reorientation and microfibril deposition has a central role in mediating tropic responses.

Tethering of cellulose synthase to microtubules dampens mechano-induced cytoskeletal organization in Arabidopsis pavement cells

Mechanical forces control development in plants and animals, acting as cues in pattern formation and as the driving force of morphogenesis. In mammalian cells, molecular assemblies residing at the interface of the cell membrane and the extracellular matrix play an important role in perceiving and transmitting external mechanical signals to trigger physiological responses. Similar processes occur in plants, but there is little understanding of the molecular mechanisms and their genetic basis. Here, we show that the number and movement directions of cellulose synthase complexes (CSCs) at the plasma membrane vary during initial stages of development in the cotyledon epidermis of Arabidopsis, closely mirroring the microtubule organization. Uncoupling microtubules and CSCs resulted in enhanced microtubule co-alignment as caused by mechanical stimuli driven either by cell shape or by tissue-scale physical perturbations. Furthermore, micromechanical perturbation resulted in depletion of CSCs from the plasma membrane, suggesting a possible link between cellulose synthase removal from the plasma membrane and microtubule response to mechanical stimuli. Taken together, our results suggest that the interaction of cellulose synthase with cortical microtubules forms a physical continuum between the cell wall, plasma membrane and the cytoskeleton that modulates the mechano-response of the cytoskeleton.

Cotton (Gossypium hirsutum) VIRMA as an N6-Methyladenosine RNA Methylation Regulator Participates in Controlling Chloroplast-Dependent and Independent Leaf Development

N6-methyladenosine (m⁶A) is one of the most abundant internal modifications of mRNA, which plays important roles in gene expression regulation, and plant growth and development. Vir-like m⁶A methyltransferase associated (VIRMA) serves as a scaffold for bridging the catalytic core components of the m⁶A methyltransferase complex. The role of VIRMA in regulating leaf development and its related mechanisms have not been reported. Here, we identified and characterized two upland cotton (Gossypium hirsutum) VIRMA genes, named as GhVIR-A and GhVIR-D, which share 98.5% identity with each other. GhVIR-A and GhVIR-D were ubiquitously expressed in different tissues and relatively higher expressed in leaves and main stem apexes (MSA). Knocking down the expression of GhVIR genes by the virus-induced gene silencing (VIGS) system influences leaf cell size, cell shape, and total cell numbers, thereby determining cotton leaf morphogenesis. The dot-blot assay and colorimetric experiment showed the ratio of m⁶A to A in mRNA is lower in leaves of GhVIR-VIGS plants compared with control plants. Messenger RNA (mRNA) high-throughput sequencing (RNA-seq) and a qRT-PCR experiment showed that GhVIRs regulate leaf development through influencing expression of some transcription factor genes, tubulin genes, and chloroplast genes including photosystem, carbon fixation, and ribosome assembly. Chloroplast structure, chlorophyll content, and photosynthetic efficiency were changed and unsuitable for leaf growth and development in GhVIR-VIGS plants compared with control plants. Taken together, our results demonstrate GhVIRs function in cotton leaf development by chloroplast dependent and independent pathways.

Tissue-targeted inorganic pyrophosphate hydrolysis in a fugu5 mutant reveals that excess inorganic pyrophosphate triggers developmental defects in a cell-autonomous manner

Excess PPi triggers developmental defects in a cell-autonomous manner. The level of inorganic pyrophosphate (PPi) must be tightly regulated in all kingdoms for the proper execution of cellular functions. In plants, the vacuolar proton pyrophosphatase (H+-PPase) has a pivotal role in PPi homeostasis. We previously demonstrated that the excess cytosolic PPi in the H+-PPase loss-of-function fugu5 mutant inhibits gluconeogenesis from seed storage lipids, arrests cell division in cotyledonary palisade tissue, and triggers a compensated cell enlargement (CCE). Moreover, PPi alters pavement cell (PC) shape, stomatal patterning, and functioning, supporting specific yet broad inhibitory effects of PPi on leaf morphogenesis. Whereas these developmental defects were totally rescued by the expression of the yeast soluble pyrophosphatase IPP1, sucrose supply alone canceled CCE in the palisade tissue but not the epidermal developmental defects. Hence, we postulated that the latter are likely triggered by excess PPi rather than a sucrose deficit. To formally test this hypothesis, we adopted a spatiotemporal approach by constructing and analyzing fugu5-1 PDF1 pro ::IPP1, fugu5-1 CLV1 pro ::IPP1, and fugu5-1 ICL pro ::IPP1, whereby PPi was removed specifically from the epidermis, palisade tissue cells, or during the 4 days following seed imbibition, respectively. It is important to note that whereas PC defects in fugu5-1 PDF1 pro ::IPP1 were completely recovered, those in fugu5-1 CLV1 pro ::IPP1 were not. In addition, phenotypic analyses of fugu5-1 ICL pro ::IPP1 lines demonstrated that the immediate removal of PPi after seed imbibition markedly improved overall plant growth, abolished CCE, but only partially restored the epidermal developmental defects. Next, the impact of spatial and temporal removal of PPi was investigated by capillary electrophoresis time-of-flight mass spectrometry (CE-TOF MS). Our analysis revealed that the metabolic profiles are differentially affected among all the above transgenic lines, and consistent with an axial role of central metabolism of gluconeogenesis in CCE. Taken together, this study provides a conceptual framework to unveil metabolic fluctuations within leaf tissues with high spatio-temporal resolution. Finally, our findings suggest that excess PPi exerts its inhibitory effect in planta in the early stages of seedling establishment in a tissue- and cell-autonomous manner.

BrAN contributes to leafy head formation by regulating leaf width in Chinese cabbage (Brassica rapa L. ssp. pekinensis)

Leafy head is an important agronomic trait that determines the yield and quality of Chinese cabbage. The molecular mechanism underlying heading in Chinese cabbage has been the focus of research, and wide leaves are a prerequisite for leafy head formation. In our study, two allelic leafy heading-deficient mutants (lhd1 and lhd2) with narrow leaf phenotypes were screened in an ethyl methanesulfonate mutagenized population from a heading Chinese cabbage double haploid line 'FT'. Genetic analysis revealed that the mutant trait was controlled by a recessive nuclear gene, which was found to be BraA10g000480.3C by MutMap and Kompetitive allele-specific PCR analyses. As BraA10g000480.3C was the ortholog of ANGUSTIFOLIA in Arabidopsis, which has been found to regulate leaf width by controlling cortical microtubule arrangement and pavement cell shape, we named it BrAN. BrAN in mutant lhd1 carried an SNP (G to A) on intron 2 that co-segregated with the mutant phenotype, and disrupted the exon-intron splice junction generating intron retention and a putative truncated protein. BrAN in mutant lhd2 carried an SNP (G to A) on exon 4 leading to a premature stop codon. The ectopic overexpression of BrAN restored normal leaf phenotype due to abnormal cortical microtubule arrangement and pavement cell shape in the Arabidopsis an-t1 mutant. However, transformation of Bran did not rescue the an-t1 phenotype. These results indicate that BrAN contributes to leafy head formation of Chinese cabbage.

Molecular mechanisms underlying leaf development, morphological diversification, and beyond

The basic mechanisms of leaf development have been revealed through a combination of genetics and intense analyses in select model species. The genetic basis for diversity in leaf morphology seen in nature is also being unraveled through recent advances in techniques and technologies related to genomics and transcriptomics, which have had a major impact on these comparative studies. However, this has led to the emergence of new unresolved questions about the mechanisms that generate the diversity of leaf form. Here, we provide a review of the current knowledge of the fundamental molecular genetic mechanisms underlying leaf development with an emphasis on natural variation and conserved gene regulatory networks involved in leaf development. Beyond that, we discuss open questions/enigmas in the area of leaf development, how recent technologies can best be deployed to generate a unified understanding of leaf diversity and its evolution, and what untapped fields lie ahead.

Leaf morphogenesis: The multifaceted roles of mechanics

Plants produce a rich diversity of biological forms, and the diversity of leaves is especially notable. Mechanisms of leaf morphogenesis have been studied in the past two decades, with a growing focus on the interactive roles of mechanics in recent years. Growth of plant organs involves feedback by mechanical stress: growth induces stress, and stress affects growth and morphogenesis. Although much attention has been given to potential stress-sensing mechanisms and cellular responses, the mechanical principles guiding morphogenesis have not been well understood. Here we synthesize the overarching roles of mechanics and mechanical stress in multilevel and multiple stages of leaf morphogenesis, encompassing leaf primordium initiation, phyllotaxis and venation patterning, and the establishment of complex mature leaf shapes. Moreover, the roles of mechanics at multiscale levels, from subcellular cytoskeletal molecules to single cells to tissues at the organ scale, are articulated. By highlighting the role of mechanical buckling in the formation of three-dimensional leaf shapes, this review integrates the perspectives of mechanics and biology to provide broader insights into the mechanobiology of leaf morphogenesis.

Coactivation of antagonistic genes stabilizes polarity patterning during shoot organogenesis

Spatiotemporal patterns of gene expression are instrumental to morphogenesis. A stable pattern interface, often between reciprocal-inhibiting morphogens, must be robustly maintained after initial patterning cues diminish, organ growth, or organ geometry changes. In plants, floral and leaf primordia obtain the adaxial-abaxial pattern at the shoot apical meristem periphery. However, it is unknown how the pattern is maintained after primordia have left the shoot apex. Here, through a combination of computational simulations, time-lapse imaging, and genetic analysis, we propose a model in which auxin simultaneously promotes both adaxial and abaxial domains of expression. Furthermore, we identified multilevel feedback regulation of auxin signaling to refine the spatiotemporal patterns. Our results demonstrate that coactivation by auxin determines and stabilizes antagonistic adaxial-abaxial patterning during aerial organ formation.

Looking beyond the gene network - metabolic and mechanical cell drivers of leaf morphogenesis

The above-ground organs in plants display a rich diversity, yet they grow to characteristic sizes and shapes. Organ morphogenesis progresses through a sequence of key events, which are robustly executed spatiotemporally as an emerging property of intrinsic molecular networks while adapting to various environmental cues. This Review focuses on the multiscale control of leaf morphogenesis. Beyond the list of known genetic determinants underlying leaf growth and shape, we focus instead on the emerging novel mechanisms of metabolic and biomechanical regulations that coordinate plant cell growth non-cell-autonomously. This reveals how metabolism and mechanics are not solely passive outcomes of genetic regulation but play instructive roles in leaf morphogenesis. Such an integrative view also extends to fluctuating environmental cues and evolutionary adaptation. This synthesis calls for a more balanced view on morphogenesis, where shapes are considered from the standpoints of geometry, genetics, energy and mechanics, and as emerging properties of the cellular expression of these different properties.

Mathematical models of neuronal growth

The establishment of a functioning neuronal network is a crucial step in neural development. During this process, neurons extend neurites-axons and dendrites-to meet other neurons and interconnect. Therefore, these neurites need to migrate, grow, branch and find the correct path to their target by processing sensory cues from their environment. These processes rely on many coupled biophysical effects including elasticity, viscosity, growth, active forces, chemical signaling, adhesion and cellular transport. Mathematical models offer a direct way to test hypotheses and understand the underlying mechanisms responsible for neuron development. Here, we critically review the main models of neurite growth and morphogenesis from a mathematical viewpoint. We present different models for growth, guidance and morphogenesis, with a particular emphasis on mechanics and mechanisms, and on simple mathematical models that can be partially treated analytically.

Imaging the living plant cell: From probes to quantification

At the center of cell biology is our ability to image the cell and its various components, either in isolation or within an organism. Given its importance, biological imaging has emerged as a field of its own, which is inherently highly interdisciplinary. Indeed, biologists rely on physicists and engineers to build new microscopes and imaging techniques, chemists to develop better imaging probes, and mathematicians and computer scientists for image analysis and quantification. Live imaging collectively involves all the techniques aimed at imaging live samples. It is a rapidly evolving field, with countless new techniques, probes, and dyes being continuously developed. Some of these new methods or reagents are readily amenable to image plant samples, while others are not and require specific modifications for the plant field. Here, we review some recent advances in live imaging of plant cells. In particular, we discuss the solutions that plant biologists use to live image membrane-bound organelles, cytoskeleton components, hormones, and the mechanical properties of cells or tissues. We not only consider the imaging techniques per se, but also how the construction of new fluorescent probes and analysis pipelines are driving the field of plant cell biology.

Small but Mighty: An Update on Small Molecule Plant Cellulose Biosynthesis Inhibitors

Cellulose is one of the most abundant biopolymers on Earth. It provides mechanical support to growing plant cells and important raw materials for paper, textiles and biofuel feedstocks. Cellulose biosynthesis inhibitors (CBIs) are invaluable tools for studying cellulose biosynthesis and can be important herbicides for controlling weed growth. Here, we review CBIs with particular focus on the most widely used CBIs and recently discovered CBIs. We discuss the effects of these CBIs on plant growth and development and plant cell biology and summarize what is known about the mode of action of these different CBIs.

Genomic analyses provide insights into spinach domestication and the genetic basis of agronomic traits

Spinach is a nutritious leafy vegetable belonging to the family Chenopodiaceae. Here we report a high-quality chromosome-scale reference genome assembly of spinach and genome resequencing of 305 cultivated and wild spinach accessions. Reconstruction of ancestral Chenopodiaceae karyotype indicates substantial genome rearrangements in spinach after its divergence from ancestral Chenopodiaceae, coinciding with high repeat content in the spinach genome. Population genomic analyses provide insights into spinach genetic diversity and population differentiation. Genome-wide association studies of 20 agronomical traits identify numerous significantly associated regions and candidate genes for these traits. Domestication sweeps in the spinach genome are identified, some of which are associated with important traits (e.g., leaf phenotype, bolting and flowering), demonstrating the role of artificial selection in shaping spinach phenotypic evolution. This study provides not only insights into the spinach evolution and domestication but also valuable resources for facilitating spinach breeding.

Spinach is a nutritious leafy vegetable growing worldwide. Here, the authors report a high-quality chromosome-scale reference genome assembly of spinach and genome resequencing of 305 accessions, and provide insights into spinach domestication and the genetic basis of agronomic traits.

Sculpting the surface: Structural patterning of plant epidermis

Plant epidermis are multifunctional surfaces that directly affect how plants interact with animals or microorganisms and influence their ability to harvest or protect from abiotic factors. To do this, plants rely on minuscule structures that confer remarkable properties to their outer layer. These microscopic features emerge from the hierarchical organization of epidermal cells with various shapes and dimensions combined with different elaborations of the cuticle, a protective film that covers plant surfaces. Understanding the properties and functions of those tridimensional elements as well as disentangling the mechanisms that control their formation and spatial distribution warrant a multidisciplinary approach. Here we show how interdisciplinary efforts of coupling modern tools of experimental biology, physics, and chemistry with advanced computational modeling and state-of-the art microscopy are yielding broad new insights into the seemingly arcane patterning processes that sculpt the outer layer of plants.

Integration of Core Mechanisms Underlying Plant Aerial Architecture

Over the last decade or so important progress has been made in identifying and understanding a set of patterning mechanisms that have the potential to explain many aspects of plant morphology. These include the feedback loop between mechanical stresses and interphase microtubules, the regulation of plant cell polarity and the role of adaxial and abaxial cell type boundaries. What is perhaps most intriguing is how these mechanisms integrate in a combinatorial manner that provides a means to generate a large variety of commonly seen plant morphologies. Here, I review our current understanding of these mechanisms and discuss the links between them.

From genes to networks: The genetic control of leaf development

Substantial diversity exists for both the size and shape of the leaf, the main photosynthetic organ of flowering plants. The two major forms of leaf are simple leaves, in which the leaf blade is undivided, and compound leaves, which comprise several leaflets. Leaves form at the shoot apical meristem from a group of undifferentiated cells, which first establish polarity, then grow and differentiate. Each of these processes is controlled by a combination of transcriptional regulators, microRNAs and phytohormones. The present review documents recent advances in our understanding of how these various factors modulate the development of both simple leaves (focusing mainly on the model plant Arabidopsis thaliana) and compound leaves (focusing mainly on the model legume species Medicago truncatula).

Mechanobiology of cell division in plant growth

Cell division in plants is particularly important as cells cannot rearrange. It therefore determines the arrangement of cells (topology) and their size and shape (geometry). Cell division reduces mechanical stress locally by producing smaller cells and alters mechanical properties by reinforcing the mechanical wall network, both of which can alter overall tissue morphology. Division orientation is often regarded as following geometric rules, however recent work has suggested that divisions align with the direction of maximal tensile stress. Mechanical stress has already been shown to feed into many processes of development including those that alter mechanical properties. Such an alignment may enable cell division to selectively reinforce the cell wall network in the direction of maximal tensile stress. Therefore there exists potential feedback between cell division, mechanical stress and growth. Improving our understanding of this topic will help to shed light on the debated role of cell division in organ scale growth.

Leaf Shape Diversity: From Genetic Modules to Computational Models

Plant leaves display considerable variation in shape. Here, we introduce key aspects of leaf development, focusing on the morphogenetic basis of leaf shape diversity. We discuss the importance of the genetic control of the amount, duration, and direction of cellular growth for the emergence of leaf form. We highlight how the combined use of live imaging and computational frameworks can help conceptualize how regulated cellular growth is translated into different leaf shapes. In particular, we focus on the morphogenetic differences between simple and complex leaves and how carnivorous plants form three-dimensional insect traps. We discuss how evolution has shaped leaf diversity in the case of complex leaves, by tinkering with organ-wide growth and local growth repression, and in carnivorous plants, by modifying the relative growth of the lower and upper sides of the leaf primordium to create insect-digesting traps.

Stable establishment of organ polarity occurs several plastochrons before primordium outgrowth in Arabidopsis

In many species, leaves are initiated at the flanks of shoot meristems. Subsequent growth usually occurs mainly in the plane of the leaf blade, which leads to the formation of a bifacial leaf with dorsoventral identities. In a classical set of surgical experiments in potato meristems, Sussex provided evidence that dorsoventrality depends on a signal emanating from the meristem center. Although these results could be reproduced in tomato, this concept has been debated. We revisited these experiments in Arabidopsis, in which a range of markers are available to target the precise site of ablation. Using specific markers for organ founder cells and dorsoventral identity, we were unable to perturb the polarity of leaves and sepals long before organ outgrowth. Although results in Solanaceae suggested that dorsoventral patterning was unstable during early development, we found that, in Arabidopsis, the local information contained within and around the primordium is able to withstand major invasive perturbations, long before polarity is fully established.

Summary: We revisited classical surgical experiments in Solanaceae, using precise laser ablations to show that dorsoventral patterning in vegetative and floral meristems in Arabidopsis is robustly programmed in primordia some time before polarity is completely established.