Four typical personal care products in a municipal wastewater treatment plant in China: Occurrence, removal efficiency, mass loading and emission

Occurrence, removal, and prioritization of organic micropollutants in four full-scale wastewater treatment plants in Korea

This study investigated the occurrence, removal rate, and potential risks of 43 organic micropollutants (OMPs) in four municipal wastewater treatment plants (WWTPs) in Korea. Results from two-year intensive monitoring confirmed the presence of various OMPs in the influents, including pharmaceuticals such as acetaminophen (pain relief), caffeine (stimulants), cimetidine (H2-blockers), ibuprofen (non-steroidal anti-inflammatory drugs- NSAIDs), metformin (antidiabetics), and naproxen (NSAIDs) with median concentrations of >1 μg/L. Some pharmaceuticals (carbamazepine-anticonvulsants, diclofenac-NSAIDs, propranolol-β-blockers), corrosion inhibitors (1H-benzotriazole-BTR, 4-methyl-1H-benzotriazole-4-TTR), and perfluorinated compounds (PFCs) were negligibly removed during WWTP treatment. The OMP concentrations in the influents and effluents were mostly lower in August than those of other months (p-value <0.05) possibly due to wastewater dilution by high precipitation or enhanced biodegradation under high-temperature conditions. The anaerobic-anoxic-oxic process (A2O) with a membrane bioreactor exhibited higher OMP removal than other processes, such as A2O with sedimentation or the conventional activated sludge process (p-value <0.05). Pesticides (DEET and atrazine), corrosion inhibitors (4-TTR and BTR), and metformin were selected as priority OMPs in toxicity-driven prioritization, whereas PFCs were determined as priority OMPs given their persistence and bioaccumulation properties. Overall, our results contribute to an important database on the occurrence, removal, and potential risks of OMPs in Korean WWTPs.

Parabens, Triclosan and Bisphenol A in Surface Waters and Sediments of Baiyang Lake, China: Occurrence, Distribution, and Potential Risk Assessment

The extensive use of the parabens triclosan (TCS) and bisphenol A (BPA) has potential adverse effects on human health and aquatic organisms. However, their monitoring information in freshwater lakes is still limited. This study simultaneously summarized the concentrations, spatial distribution characteristics, and correlations of four types of parabens, TCS, and BPA in the surface water and sediment of Baiyang Lake. Finally, the potential risks of target pollutants were evaluated from two aspects: human health risks and ecological risks. The average contaminations of target compounds in surface water and sediment-BPA, TCS, and ∑4 parabens-was 33.1, 26.1, 0.7 ng/L and 24.5, 32.5, 2.5 ng/g, respectively. The total concentration of target compounds at the inlet of the upstream Fu River and Baigouyin River is significantly higher than that near Hunan and the outlet. In addition, Spearman's correlation analysis showed a significant positive correlation between compounds. The health hazards of target compounds in surface water were all within safe limits. However, the risk quotient results indicate that in some locations in surface water, TCS poses a high risk to algae and a moderate risk to invertebrates and fish, and appropriate attention should be paid to these areas.

Parabens as environmental contaminants of aquatic systems affecting water quality and microbial dynamics

Among different pollutants of emerging concern, parabens have gained rising interest due to their widespread detection in water sources worldwide. This occurs because parabens are used in personal care products, pharmaceuticals, and food, in which residues are generated and released into aquatic environments. The regulation of the use of parabens varies across different geographic regions, resulting in diverse concentrations observed globally. Concentrations of parabens exceeding 100 μg/L have been found in wastewater treatment plants and surface waters while drinking water (DW) sources typically exhibit concentrations below 6 μg/L. Despite their low levels, the presence of parabens in DW is a potential exposure route for humans, raising concerns for both human health and environmental microbiota. Although a few studies have reported alterations in the functions and characteristics of microbial communities following exposure to emerging contaminants, the impact of the exposure to parabens by microbial communities, particularly biofilm colonizers, remains largely understudied. This review gathers the most recent information on the occurrence of parabens in water sources, as well as their effects on human health and aquatic organisms. The interactions of parabens with microbial communities are reviewed for the first time, filling the knowledge gaps on the effects of paraben exposure on microbial ecosystems and their impact on disinfection tolerance and antimicrobial resistance, with potential implications for public health.

Antibiotic, Heavy Metal, and Biocide Concentrations in a Wastewater Treatment Plant and Its Receiving Water Body Exceed PNEC Limits: Potential for Antimicrobial Resistance Selective Pressure

Although the rise in antimicrobial resistance has been attributed mainly to the extensive and indiscriminate use of antimicrobials such as antibiotics and biocides in humans, animals and on plants, studies investigating the impact of this use on water environments in Africa are minimal. This study quantified selected antibiotics, heavy metals, and biocides in an urban wastewater treatment plant (WWTP) and its receiving water body in Kwazulu-Natal, South Africa, in the context of the predicted no-effect concentrations (PNEC) for the selection of antimicrobial resistance (AMR). Water samples were collected from the WWTP effluent discharge point and upstream and downstream from this point. Heavy metals were identified and quantified using the United States Environmental Protection Agency (US EPA) method 200.7. Biocides and antibiotic residues were determined using validated ultra-high-performance liquid chromatography with tandem mass spectrometry-based methods. The overall highest mean antibiotic, metal and biocide concentrations were observed for sulfamethoxazole (286.180 µg/L), neodymium (Nd; 27.734 mg/L), and benzalkonium chloride (BAC 12) (7.805 µg/L), respectively. In decreasing order per sampling site, the pollutant concentrations were effluent > downstream > upstream. This implies that the WWTP significantly contributed to the observed pollution in the receiving water. Furthermore, most of the pollutants measured recorded values exceeding the recommended predicted no-effect concentration (PNEC) values, suggesting that the microbes in such water environments were at risk of developing resistance due to the selection pressure exerted by these antimicrobials. Further studies are required to establish such a relationship.

Associations between urinary parabens and lung cancer

Parabens are a family of endocrine-disrupting chemicals. Environmental estrogens may play a vital role in the development of lung cancer. To date, the association between parabens and lung cancer is unknown. Based on the 189 cases and 198 controls recruited between 2018 and 2021 in Quzhou, China, we measured 5 urinary parabens concentrations and examined the association between urinary concentrations of parabens and lung cancer risk. Cases showed significantly higher median concentrations of methyl-paraben (MeP) (2.1 versus 1.8 ng/mL), ethyl-paraben (0.98 versus 0.66 ng/mL), propyl-paraben (PrP) (2.2 versus 1.4 ng/mL), and butyl-paraben (0.33 versus 0.16 ng/mL) than controls. The detection rates of benzyl-paraben were only 8 and 6% in the control and case groups, respectively. Therefore, the compound was not considered in the further analysis. The significant correlation between urinary concentrations of PrP and the risk of lung cancer (odds ratio (OR)_adjusted = 2.22, 95% confidence interval (CI): 1.76, 2.75; P_trend < 0.001) was identified in the adjusted model. In the stratification analysis, we found that urinary concentrations of MeP were significantly associated with lung cancer risk (OR = 1.16, 95% CI: 1.01, 1.27 for the highest quartile group). Besides, comparing the second, third, and fourth quartile groups with the lowest group of PrP, we also observed urinary PrP concentrations associated with lung cancer risk, with the adjusted OR of 1.52 (95% CI: 1.29, 1.65, P_trend = 0.007), 1.39 (95% CI: 1.15, 1.60, P_trend = 0.010), and 1.85 (95% CI: 1.53, 2.30, P_trend = 0.001), respectively. MeP and PrP exposure, reflected in urinary concentrations of parabens, may be positively associated with the risk of lung cancer in adults.

Comparative toxicogenomics of benzotriazole ultraviolet stabilizers at environmental concentrations in Asian clam (Corbicula fluminea): Insight into molecular networks and behavior

Benzotriazole ultraviolet stabilizers (BUVSs) are widespread emerging pollutants, which can pose exposure risks to benthic organisms. However, the toxicity and mechanisms of BUVSs congeners in benthic clams are far from elucidated. In this study, Asian clams (Corbicula fluminea) were exposed to one of UV-234, UV-326, UV-329, or UV-P at environmentally relevant levels (0.1, 1, and 10 μg/L) for 21 days. Filtration rate (FR) was increased in clams exposed to all BUVSs and there were notable histopathologic changes, including irregular digestive lumen, lipid droplet vacuolation, and degraded epithelial cells. To determine the molecular underpinnings following BUVSs exposure, the transcriptome responses in digestive glands were compared. Differentially expressed genes shared among BUVSs treatments were associated with focal adhesion, TNF-α/NF-κB proinflammatory pathways, and apoptosis. Following this, biochemical analysis of biomarkers related to apoptosis were conducted to further validate response. Exposure to BUVSs inhibited anti-oxidant enzyme activity and induced oxidative stress. Heat shock proteins were also triggered with exposure, and there was an induction of caspase-3 and caspase-9 activity. Molecular responses were not identical in the digestive gland of C. fluminea when comparing responses to BUVSs; nevertheless conserved mechanism (impairment of the oxidative defense system, immune system disruption, and induction of apoptosis) among BUVSs congeners was noted. This study provides novel insight into the toxicity and hazards of BUVSs in benthic organisms.

Seafood consumption as a source of exposure to high production volume chemicals: A comparison between Catalonia and the Canary Islands

Seafood plays an important role in diet because of its health benefits. However, the fact that chemical compounds such as high production volume chemicals may be present in seafood means that its consumption can be a potential risk for population. To assess the occurrence of HPVs and estimate the exposure and risk associated with their consumption, specimens of the most consumed seafood species in Catalonia and the Canary Islands, Spain, were collected and analysed. Results showed higher levels of HPVs in samples from Catalonia and a prevalence of phthalate esters and benzenesulfonamides over the other target compounds in samples from both locations. Multivariate analysis showed spatial differences between the mean concentration profiles of HPVs for the samples from Catalonia and the Canary Islands. Exposures were higher for the samples from Catalonia, although the intake of HPVs via seafood was not of any real concern in either of the locations.

Assessing the Effects of Ozonation on the Concentrations of Personal Care Products and Acute Toxicity in Sludges of Wastewater Treatment Plants

The aim of this study was to understand the distribution of the personal care products nonylphenol (NP), triclosan (TCS), benzophenone-3 (BP-3), and caffeine in the sludges from three wastewater treatment plants (WWTP-A, -B, and -C) in southern Taiwan. The four compounds were analyzed from activated sludge and dewatered sludge samples, and then the samples were treated with pressure-assisted ozonation under different conditions and removal efficiencies. All four target compounds were detected, especially NP, which was detected in the highest concentrations in the activated sludges of WWTP-A and dewatered sludges of WWTP-C at 17.19 ± 4.10 and 2.41 ± 1.93 µg/g, respectively. TCS was dominant in dewatered sludges from WWTP-B, and the highest detected concentration was 13.29 ± 6.36 µg/g. Removals of 70% and 90% were attained under 150 psi at 40 cycles for NP and TCS, respectively, with 5 min of ozonation reaction time, a solid/water ratio of 1:20, and 2% ozone concentration. Ecological risk quotients (RQs) were calculated by the ratios of the 10-day Hyalella azteca (freshwater amphipod) LC50 to the environmental concentrations of the target compounds. High RQs were found to be >10 for NP, TCS, and BP-3 in untreated sludges, resulting in significant ecological risks to aquatic organisms when the sludges are arbitrarily disposed. However, the toxic effects on Hyalella azteca were not significantly different among ozone sludge treatments. The reason for this may be related to the formation of toxic oxidation by-products and incomplete mineralization of organic compounds. This could also be true for unknown intermediates. The relatively high detection frequencies of these emerging compounds in WWTP sludges requires further applications and treatments.

Synthesis of biochar-CoFe2O4 nanocomposite for adsorption of methylparaben from wastewater under full factorial experimental design

The presence of endocrine-disrupting chemicals in municipal wastewater has emerged as a threat to human health and the environment. Therefore, this study aimed to develop biochar-cobalt ferrite (BCF) nanocomposite for the removal of methylparaben from water under the full factorial experimental design of 4 factors with 3 levels (3⁴). The biochar-CoFe₂O₄ nanocomposite was developed by co-precipitation method from cobalt ferrite and biochar of Eucalyptus tree bark. Adsorbent surface morphology and functional and elemental composition were carried out by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and energy-dispersive X-ray spectroscopy (EDS) techniques which showed the presence of cracks with a rough surface, reasonable surface chemical composition, and many chemical functional groups, respectively. The experimental and predicted adsorption efficiencies ranged from 25.3 to 85.6% and 21.8 to 80.3%, respectively. The maximum adsorption performance (85.6%) reduced the methylparaben concentration from 27.5 to 4.0 mg/L at the optimum condition of adsorbent dose of 55 mg/100 mL, pH 6, contact time 90 min, and the initial methylparaben concentration of 27.5 mg/L. However, the adsorbent dose was the most influential main factor whereas the least influential was the interaction between solution pH and contact time under the regression model. The model also showed that 69% methylparaben removal was described by the regression model. The experimental data best fitted with the Freundlich model indicate multilayer adsorption which is the implication of physisorption. The sorption mechanism is attributed to Vander Waals forces, H-bonding, and dipole interaction. This BCF nanocomposite adsorbent appears to be promising for the removal of methylparaben from wastewater, but a further optimization process is essential to boost the treatment performance.

Sequential biological and solar photocatalytic treatment system for greywater treatment

In this study, sequencing batch reactor (SBR) using anaerobic/aerobic/anoxic process was coupled to a solar photocatalytic reactor (SPCR) for greywater treatment. The greywater effluent from SBR (operated at the optimal condition: 6.8 h hydraulic retention time (HRT), 0.7 Volumetric exchange ratio (VER) and 7.94 d solids retention time (SRT) with optimal corn cob adsorbent dosage (0.5 g/L)) was fed to the SPCR (operated at optimal conditions: pH - 3, H₂O₂ dosage - 1 g/L, catalyst dosage - 5 g/L). Chemical oxygen demand (COD) removal of 92.8±0.5% and ∼100% were achieved in SBR and SBR-SPCR, respectively. Similarly, total organic carbon (TOC) removal of 91±0.9% and ∼100% were observed in SBR and SBR-SPCR, respectively. After SBR treatment, average total nitrogen (TN) removal of 84% was found and this TN removal increased to 93% after combined SBR-SPCR treatment. The maximum PO₄^3-_P reduction of 80±1.5% % was achieved with SBR-adsorption system. In addition, a maximum of 87±0.9% of net PO₄^3-_P removal was reached after SBR-SPCR treatment. 58.9±2.3% BP (benzophenone-3) removal was obtained in the SBR while the integration of SBR and SPCR treatment was resulted in 100% BP removal. An effective anionic surfactant (AS) removal rate (80.1±2.2%) was observed in the SBR phase, which further improved to 94.9±1% at the end of 4 h SPCR treatment.

Concentration profiles of a typical ultraviolet filter benzophenone-3 and its derivatives in municipal sewage sludge in China: Risk assessment in sludge-amended soil

The widespread occurrence of benzophenones in various environmental matrices is a public health concern due to their endocrine-disrupting effects. Nevertheless, information on the exposure and health risk of benzophenones derived from sludge-amended soil is scarce. Herein, we measured a typical ultraviolet filter benzophenone-3 (BP-3) and its four derivatives in sewage sludges from different regions of China. BP-3 was the most abundant benzophenone analog in sludge (range: 0.581-305 ng/g dw), whereas no difference was found for BP-3 in sludge from different regions (p > 0.05). The sum concentration range of the four BP-3 derivatives in sludge was 0.128-74.2 ng/g dw. The mass loading and per capita daily release were calculated to determine the environmental release of benzophenones. The highest mass loading of benzophenones was found in Eastern China (20.9 kg/yr), followed by Northeast China (8.41 kg/yr) and Northwest China (8.13 kg/yr). The per capita daily release value of benzophenones via sludge was estimated as 100 ng/day/person. Calculation of the risk quotients (RQs) of BP-3 and its derivatives showed that benzophenones in sludge-amended soils had low environmental risks (RQs < 0.1) in all geographic regions. This nationwide study provides information outlining the environmental release of benzophenones through sludge composting and potential ecological risk from sludge-amended soil.

A review on emerging micropollutants: sources, environmental concentration and toxicity

Every minute, the environment is filled with pollutants of various types, including physical, chemical, and biological. A new threat has emerged in recent years due to human activity, which is of significant concern. These pollutants are not like conventional pollutants but can alter the physiology of living things, and hence these are named emerging pollutants. The pollutant sources include crop protection chemicals, personal care products, antimicrobial mixtures, active pharmaceutical ingredients (API). These compounds are biologically crucial because their minute quantity can also disrupt an individual's endocrine system, and hence they are also called endocrine disruptors. This current work reviews many aspects, including source, problems, and legislative solutions that have been farmed to cope with the current situation of emerging micropollutants.

Parabens as chemicals of emerging concern in the environment and humans: A review

Parabens are one of the most widely used preservatives in food, pharmaceuticals and personal care products (PCPs) because of their advantageous properties and low toxicity based on the early assessments. However, recent research indicates that parabens may act as endocrine-disrupting chemicals (EDCs) and thus, are considered as chemicals of emerging concern that have adverse human health effects. To provide the basis for future human health studies, we reviewed relevant literature, published between 2005 and 2020, regarding the levels of parabens in the consumer products (pharmaceuticals, PCPs and food), environmental matrices and humans, including susceptible populations, such as pregnant women and children. The analysis showed that paraben detection rates in consumer products, environmental compartments and human populations are high, while the levels vary greatly by country and paraben type. The concentrations of parabens reported in pregnant women (~20-120 μg/L) were an order of magnitude higher than in the general population. Paraben concentrations in food and pharmaceuticals were at the ng/g level, while the levels in PCPs reached mg/g levels. Environmental concentrations ranged from ng/L-μg/L in surface waters to tens of μg/g in wastewater and indoor dust. The levels of human exposure to parabens appear to be higher in the U.S. and EU countries than in China and India, which may change with the increasing production of parabens in the latter countries. The review provides context for future studies to connect paraben exposure levels with human health effects.

PbO2 electrode modified by graphene oxide to boost electrodegradation of 4-hydroxybenzophenone

4-Hydroxybenzophenone (4-OH-BP), a highly toxic and widely used pharmaceutical and personal care products (PPCPs), has been obtained growing concern recently. Electrochemical anodic oxidation technology has been confirmed efficient in eliminating organics from aqueous solution. In this work, we constructed two novel PbO₂ electrodes by modifying the middle or active layer with graphene oxide (GO) to degrade aquatic 4-OH-BP. Compared with the pristine PbO₂ electrode, the modification by GO could enhance the anchor of the active layer (PbO₂ particles) onto the middle layer and improve the isolation of the titanium matrix from the active layer and solution. Therefore, we might obtain the better performance of PbO₂ electrodes after modification. Under the experimental conditions optimized by the Box-Behnken design model, as we expected, two novel electrodes (with modified middle layer: 99.85%; with modified active layer: 100%) outperformed the pristine electrode (95.46%) for 4-OH-BP degradation. We proposed the catalytic mechanism of GO-modified electrodes for 4-OH-BP and the degradation pathway of 4-OH-BP and evaluated the toxicity of intermediates based on the quantitative structure-activity relationship model. Furthermore, two GO-modified PbO₂ electrodes consumed less energy than commercial boron-doped diamond electrode, reflecting the prominent practicability of GO-modified PbO₂ electrode.

Occurrence of pharmaceutical residues, personal care products, lifestyle chemicals, illicit drugs and metabolites in wastewater and receiving surface waters of Krakow agglomeration in South Poland

This is the first study of broad range of chemical classes CECs conducted in the upper Wisla river catchment including the biggest WWTPs in this region and surface waters. The list of compounds is extensive and the paper provides, for the first time, better understanding of environmental burden from PCPCs in Poland. Cumulative contribution of hypertension pharmaceuticals, nonsteroidal anti-inflammatory drugs (NSAIDs) and lifestyle chemicals was 89% and 95% in wastewater influent, and 75% in wastewater effluent at both WWTPs. Significant removal efficiencies, exceeding 90%, were found for parabens, UV filters, NSAIDs, steroid estrogens, plasticizers, antibacterials/antibiotics, stimulants and metabolites and lifestyle chemicals. The comparison of the average mass loads of CECs between the influent and effluent, has shown that 27% and 29% of all detected CECs were removed by less than 50%. An increase of concentrations of CECs in the effluent was observed for 18% and 20% of all detected CECs in Kujawy and Plaszow WWTPs, respectively. Negative mass balances of fexofenadine, venlafaxine, o-desmethyltramadol, ketamine and temazepam were noted within WWTPs, which are a result of dissolution of persistent contaminants accumulated in aggregates and/or back-transformation or de-conjugation of metabolites into parent compounds. 44 CECs were detected in surface waters located upstream and downstream of the WWTPs. The concentrations of compounds were largely dependent on the dilution factor of WWTP discharge. The risk quotation (RQ) values for compounds present in surface waters were calculated in relation to their potential for bioaccumulation. Among compounds with high potential for bioaccumulation, with log K_OW ≥ 4.5, diclofenac, atorvastatin and triclosan were found to be of high risk. Many CECs with high, moderate or even low environmental impact have shown high potential for bioaccumulation and should be considered as priority at the same risk level. Moreover, possible synergistic action is still of concern.

Environmental Distribution of Personal Care Products and Their Effects on Human Health

Personal care products (PCPs) are generally used for personal hygiene, cleaning, grooming, and beautification. These include hair and skin care products, baby care products, UV blocking creams, facial cleansers, insect repellents, perfumes, fragrances, soap, detergents, shampoos, conditioners, toothpaste, etc., thus exposing humans easily. Personal preferences related to PCPs usage frequency are highly variable and depend on socioeconomic status and lifestyle factors. The increasing availability and diversity of PCPs from the retailer outlets consequently result in higher loading of PCPs into wastewater systems and, therefore, the environment. These compounds persistently and continuously release biologically active and inactive ingredients in the atmosphere, biosphere, geosphere, and demonstrating adverse effects on human, wild, and marine life. Advanced techniques such as granular activated carbon filtration and algae-based system may help biotransformation and remove PCP contaminants from water with improved efficiency. Additionally, harmony among PCPs related regulations of different countries may encourage standard checks to control their manufacturing, sale, and distribution across the borders to ensure consumers' safety. Furthermore, all intended ingredients, their concentrations, and instructions for frequency of use as per age groups may be clearly labeled on packages of PCPs. In conclusion, the emerging environmental contaminants of PCPs and their association with the growing risks of negative effects on human health and globally on the environment emphasize the chemical-free simple lifestyle.

Occurrence, distribution, and health risk assessment of 20 personal care products in indoor and outdoor swimming pools

The distribution of 20 personal care products (PCPs), including seven preservatives, six UV filters, five anticorrosion agents, and two antimicrobials, were determined in 40 swimming pools using solid phase extraction followed by liquid chromatography-tandem mass spectrometry. Among 14 targets detected, 1H-benzotriazole and triclocarban were observed in all samples. The detected concentrations of preservatives, UV filters, anticorrosion agents, and antimicrobials were in the ranges of not detected (nd)-179 ng L^-1, nd-289 ng L^-1, nd-58.4 ng L^-1, and nd-56.9 ng L^-1, respectively. The presence of preservatives, UV filters and antimicrobials in pool waters might be mainly brought in by human activities while anticorrosion agents were mainly from the source water. Furthermore, the concentrations of methylparaben, ethylparaben, 1H-benzotriazole, 5-methyl-1H-benzotriazole, 5-chloro-1H-benzotriazole, and 5,6-dimethyl-1H-benzotriazole in indoor pools were found higher than those in outdoor pools. The longer opening time and weaker light intensity for indoor pools might cause the difference. The redundancy analysis showed significantly negative correlations between the concentrations of parabens and the contents of residual chlorine in the pool waters. A higher chlorine residue may promote the decomposition of parabens. Health risk assessment showed that skin penetration would be the main approach for the intake of PCPs by swimmers while swimming. Compared with the non-athletic swimmers, the athletic swimmers might be more sensitive, but the health risks for both groups of swimmers could be negligible.

Occurrence of benzotriazole UV stabilizers in coastal fishes

Chemicals added in personal care products are of emerging concern because their fate and their effect on the environment is not completely known. Benzotriazole UV stabilizers (BUVSs) are compounds used in different cosmetic products, which may reach the marine environment through marine discharge from treated waters or directly from bathing areas. Once released into the aquatic ecosystem, BUVSs can be bioaccumulated by aquatic organisms. To identify the human exposure risk, it is important to have suitable analytical methods to determine the presence of BUVSs in these organisms. Because of the complexity of such a biological matrix, selective extraction and detection techniques are required to isolate and quantify these kinds of pollutants at trace levels. In the present work, we optimized a method based on microwave-assisted extraction combined with ultra-high performance liquid chromatography and mass spectrometry detection to determine six benzotriazole compounds in fish samples. The absolute extraction yields provided by the proposed method were higher than 40% for most compounds, with intra-day and inter-day relative standard deviations ranging from 0.27 to 6.06 and 1.12-21.3%, respectively. The limits of quantification were in the range of 1.13-9.66 ng g^-1 (dry weight). The method was applied to the study of three species of fish (Boops boops, Sphyraena viridensis, Sphoeroides marmoratus) that were collected close to three marine outfalls of treated waters on the Gran Canaria Island (Spain) for two years. Four of the six studied compounds, UV-326, UV-328, UV-329 and UV-360, were found with concentrations ranging from 1.34 ng g^-1 to 45.6 ng g^-1 (dry weight).