Effects of different metal ions (Ca, Cu, Pb, Cd) on formation of cyanobacterial blooms

Impact of butylparaben on growth dynamics and microcystin-LR production in Microcystis aeruginosa

The presence of butylparaben (BP), a prevalent pharmaceutical and personal care product, in surface waters has raised concerns regarding its impact on aquatic ecosystems. Despite its frequent detection, the toxicity of BP to the cyanobacterium Microcystis aeruginosa remains poorly understood. This study investigates the influence of BP on the growth and physiological responses of M. aeruginosa. Results indicate that low concentrations of BP (below 2.5 mg/L) have negligible effects on M. aeruginosa growth, whereas higher concentrations (5 mg/L and 10 mg/L) lead to significant growth inhibition. This inhibition is attributed to the severe disruption of photosynthesis, evidenced by decreased Fv/Fm values and chlorophyll a content. BP exposure also triggers the production of reactive oxygen species (ROS), resulting in elevated activity of antioxidant enzymes. Excessive ROS generation stimulates the production of microcystin-LR (MC-LR). Furthermore, lipid peroxidation and cell membrane damage indicate that high BP concentrations cause cell membrane rupture, facilitating the release of MC-LR into the environment. Transcriptome analysis reveals that BP disrupts energy metabolic processes, particularly affecting genes associated with photosynthesis, carbon fixation, electron transport, glycolysis, and the tricarboxylic acid cycle. These findings underscore the profound physiological impact of BP on M. aeruginosa and highlight its role in stimulating the production and release of MC-LR, thereby amplifying environmental risks in aquatic systems.

Quantitative modelling reservoir microalgae proliferation in response to water-soluble anions and cations influx

Atmospheric precipitation deposits acid-forming substances into surface water. However, the effects of water-soluble components on microalgae proliferation are poorly understood. This study analysed the growth characteristics of three microalgae bioindicators of water quality: Scenedesmus quadricauda, Chlorella vulgaris, and Scenedesmus obliquus, adopting on-site monitoring, culture experiments simulating 96 types of water by supplementing anions and cations, and predictive modelling. The result quantified pH > 3.0 rain with dominant Ca2+, Mg2+, and K+ cations, together with anions of NO3- and SO42-. The presence of Ca2+ of up to 0.1 mM and Mg2+ concentrations (>0.5 mM) suppressed Scenedesmus quadricauda growth. Soluble ions, luminosity, and pH had significant impacts (p ≤ 0.01) on increased microalgae proliferation. A newly proposed microalgae growth model predicted a 10.7-fold increase in cell density six days post-incubation in the case of rainfall. The modelling supports algal outbreaks and delays prediction during regional water cycles.

The interfacial interaction between typical microplastics and Pb2+ and their combined toxicity to Chlorella pyrenoidosa

Microplastics (MPs), a new type of pollutant, have attracted much attention worldwide. MPs are often complexed with other pollutants such as heavy metals, resulting in combined toxicity to organisms in the environment. Studies on the combined toxicity of MPs and heavy metals have usually focused on the marine, while on the freshwater are lacking. In order to understand the combined toxic effects of MPs and heavy metals in the freshwater, five typical MPs (PVC, PE, PP, PS, PET) were selected to investigate the adsorption characteristics of MPs to Pb2+ before and after the MPs aging by ultraviolet (UV) irradiation through static adsorption tests. The results showed that UV aging enhanced adsorption of Pb2+ by MPs. It is noteworthy that MPs-PET had the highest adsorption capacity for Pb2+, and the interaction between MPs-PET and Pb2+ was the strongest. We specifically selected MPs-PET to study its combined toxicity with Pb2+ to Chlorella pyrenoidosa. In the combined toxicity test, MPs-PET and Pb2+ had significant toxic effects on Chlorella pyrenoidosa in the individual exposure, and the toxicity of individual Pb2+ exposure was greater than that of individual MPs-PET exposure. In the combined exposure, when MPs-PET and Pb2+ without adsorption (MPs-PET/Pb2+), MPs-PET and Pb2+ had a synergistic effect, which would produce strong physical and chemical stress on Chlorella pyrenoidosa simultaneously, and the toxic effect was the most significant. After the adsorption of MPs-PET and Pb2+ (MPs-PET@Pb2+), the concentration and activity of Pb2+ decreased due to the adsorption and fixation of MPs-PET, and the chemical stress on Chlorella pyrenoidosa was reduced, but the physical stress of MPs-PET still existed and posed a serious threat to the survival of Chlorella pyrenoidosa. This study has provided a theoretical basis for further assessment of the potential environmental risks of MPs in combination with other pollutants such as heavy metals.

Micro- and nanoplastics interact with conventional pollutants on microalgae: Synthesis through meta-analysis

Micro- and nanoplastics (MNPs) have been found to occur intensively in aquatic environments, along with other conventional pollutants (Po) such as heavy metals, pesticides, pharmaceuticals, etc. However, our understanding of how MNPs and Po interact on aquatic primary producers is fragmented. We performed a quantitative meta-analysis based on 933 published experimental assessments from 44 studies to examine the coupled effects of MNPs and Po on microalgae. Although the results based on interaction type frequency (the proportion of each interaction type in all results) revealed dominantly additive interactions (56%) for overall physiological performance, an overall antagonistic effect was observed based on the mean interaction effect sizes. A higher proportion of antagonistic interaction type frequency was found in marine species compared to fresh species. The antagonistic effects were particularly significant for growth, oxidative responses, and photosynthesis, which could be attributed to the adsorption effect of MNPs on Po and thus the decreasing concentrations of pollutants in the medium. Larger-sized, negatively charged or uncharged and aged MNPs had higher proportions of antagonistic effects compared to smaller-sized, positively charged and virgin MNPs, due to their stronger adsorption capacity to Po. This study provides a comprehensive insight into the interactive effects of MNPs and Po on microalgae.

Exploring the molecular mechanism of Chlorella vulgaris in response to androstenedione exposure based on genes continuously up-regulated in transcription analysis

Androstenedione (ADSD) is one of the widely detected androgens in diverse aquatic environments. However, there were few reports on the molecular mechanism of Chlorella vulgaris exposure to ADSD. In our previous research, we have investigated the genes associated with chlorophyll metabolism in Chlorella vulgaris response to ADSD. In this study, we focus on continuously up-regulated genes to explore the mechanism underlying Chlorella vulgaris resistance to ADSD toxicity. Chlorella vulgaris was exposed to ADSD with five concentration gradients. The continuously up-regulated genes were enriched by Series Test of Cluster (STC) analysis and verified by qRT-PCR. Microalgae Super Oxidase Dimutase (SOD) and Microalgae Malonic dialdehyde (MDA), two indicators of oxidative stress, were determined by ELISA after exposure to ADSD. The results showed that ADSD can stimulate the production of extracellular polymeric substances (EPS) and lead to enlargement in the cell body of Chlorella vulgaris. In addition, steroid biosynthesis and oxidoreductase activity processes were consistently up-regulated upon exposure to ADSD. In conclusion, our study highlighted the crucial role of phenotypic modification, hormone synthesis, and redox mechanisms in protecting Chlorella vulgaris cells from the harmful effects of ADSD contamination.

Effects of biochar on the manganese enrichment and oxidation by a microalga Scenedesmus quadricauda in the aquatic environment

Microalgae play a significant impact in the biogeochemical cycle of Mn(II) in the aquatic ecosystem. Meanwhile, the inflow of biochar into the water bodies is bound to impact the aquatic organisms. However, the influence of biochar on the manganese transformation in algae-rich water has not drawn much attention. Thus, we studied the effects of rice straw biochar on manganese enrichment and oxidation by a common type of algae in freshwater (Scenedesmus quadricauda). The results showed that Mn(II) was absorbed intracellularly and adsorbed extracellularly by active algal cells. A significant portion of enriched Mn(II) was oxidized to amorphous precipitates MnO2, MnOOH, and Mn2O3. Moreover, the extracellular bound Mn(II) content in the coexistent system of algae and biochar increased compared with the pure Scenedesmus quadricauda system. Nevertheless, the intracellular Mn content was continually lowered as the biochar dose rose from an initial 0.2 to 2.0 g·L-1, suggesting that Mn assimilation of the cell was suppressed. It was calculated that the total enrichment ability of Scenedesmus quadricauda in the algae-biochar coexistent system was 0.31- 15.32 mg Mn/g biomass, more than that in the pure algae system. More importantly, with biochar in the algae system, the amount of generated MnOx increased, and more Mn(II) was oxidized into highly-charged Mn(IV). This was probably because the biochar could relieve the stress of massive Mn(II) on algae and support the MnOx precipitates. In brief, moderate biochar promoted the Mn(II) accumulation by algal cells and its oxidation activity. This study offers deeper insight into the bioconversion of Mn(II) by algae and the potential impact of biochar application to the aquatic system.

Response of two cyanobacterial strains to non-biodegradable glitter particles

Microplastic pollution is a growing concern mainly in aquatic environments due to its deleterious effects. Some types of microplastics, such as glitter, remain overlooked. Glitter particles are artificial reflective microplastics used by different consumers within arts and handcraft products. In nature, glitter can physically affect phytoplankton by causing shade or acting as a sunlight-reflective surface, influencing primary production. This study aimed to evaluate the effects of five concentrations of non-biodegradable glitter particles in two bloom-forming cyanobacterial strains, Microcystis aeruginosa CENA508 (unicellular) and Nodularia spumigena CENA596 (filamentous). Cellular growth rate, estimated by optical density (OD), demonstrated that the applied highest glitter dosage decreases cyanobacterial growth rate with a more evident effect on M. aeruginosa CENA508. The cellular biovolume of N. spumigena CENA596 increased following the application of high concentrations of glitter. Still, no significant difference was detected in chlorophyll-a and carotenoids' contents for both strains. These results suggest that environmental concentrations of glitter, similar to the highest dosage tested (>200 mg _glitter L^-1), may negatively influence susceptible organisms of the aquatic ecosystems, as observed with M. aeruginosa CENA508 and N. spumigena CENA596.

Efficient control of cyanobacterial blooms with calcium peroxide: Threshold and mechanism

This study explored the feasibility and mechanism of cyanobacterial blooms control by calcium peroxide (CaO₂). The obtained results demonstrated a strong inhibitory effect of CaO₂ on cyanobacterial growth. The removal chlorophyll-a rate reached 31.4 %, while optimal/maximal quantum yield of PSII (Fv/Fm) decreased to 50 % after CaO₂ treatment at a concentration of 100 mg L^-1 for 96 h. Two main mechanisms were involved in the treatment of cyanobacterial bloom with CaO₂, namely oxidative damage and cyanobacterial colony formation. It was found that CaO₂ released reactive oxygen species (ROS), namely hydroxyl radicals (·OH), singlet oxygen (¹O₂), and superoxide radicals (·O₂^-), inhibiting the activity of antioxidant enzymes in cyanobacterial cells and resulting in intracellular oxidation imbalance. Cyanobacteria can resist oxidative damage by releasing extracellular polymeric substances (EPS). These EPS can combine with CaO₂-derived Ca, forming large cyanobacterial aggregates and, consequently, accelerating cell sedimentation. In addition, CaO₂ caused programmed cell death (PCD) of cyanobacteria and irreversible damage to the ultrastructure characteristic of the cyanobacterial cells. The apoptotic rate was greatly improved at 100 mg L^-1 CaO₂. On the other hand, the results obtained using qRT-PCR analysis confirmed the contribution of CaO₂ to the down-regulation of photosynthesis-related genes (rbcL and psaB), the up-regulation of microcystins (mcyA and mcyD), the up-regulation of the oxidation system: peroxiredoxin (prx) through oxidative mechanisms. The present study proposes a novel treatment method for water-containing cyanobacterial blooms using CaO₂.

Widespread formation of intracellular calcium carbonates by the bloom-forming cyanobacterium Microcystis

The formation of intracellular amorphous calcium carbonates (iACC) has been recently observed in a few cultured strains of Microcystis, a potentially toxic bloom-forming cyanobacterium found worldwide in freshwater ecosystems. If iACC-forming Microcystis are abundant within blooms, they may represent a significant amount of particulate Ca. Here, we investigate the significance of iACC biomineralization by Microcystis. First, the presence of iACC-forming Microcystis cells has been detected in several eutrophic lakes, indicating that this phenomenon occurs under environmental conditions. Second, some genotypic (presence/absence of ccyA, a marker gene of iACC biomineralization) and phenotypic (presence/absence of iACC) diversity have been detected within a collection of strains isolated from one single lake. This illustrates that this trait is frequent but also variable within Microcystis even at a single locality. Finally, one-third of publicly available genomes of Microcystis were shown to contain the ccyA gene, revealing a wide geographic and phylogenetic distribution within the genus. Overall, the present work shows that the formation of iACC by Microcystis is common under environmental conditions. While its biological function remains undetermined, this process should be further considered regarding the biology of Microcystis and implications on the Ca geochemical cycle in freshwater environments.

Responses and tolerance mechanisms of microalgae to heavy metal stress: A review

Microalgae, the primary producers in water ecosystems, are the main food of fish and shrimp. Microalgae have a great capacity to absorb heavy metals, and low concentrations of heavy metals can promote the growth of them. But high concentrations have a strong influence on the physiological and biochemical processes in algae, such as growth, photosynthesis, cell ultrastructure, protein content and fatty acid composition. Heavy metals may also induce the formation of reactive oxygen species (ROS), which causes the oxidation damage of protein, lipid and thiol peptides, and activates the antioxidant system. Heavy metals can be removed or converted into another state by biosorption of cell surface, accumulation in cells, combining with antioxidant enzymes and so on. This review summarized the responses of microalgae to heavy metals and comprehensively described the removal and tolerance mechanisms by extracellular adsorption and intracellular accumulation, which are helpful to treat pollution and improve the culture of microalgae.

Shift of calcium-induced Microcystis aeruginosa colony formation mechanism: From cell adhesion to cell division

Colony formation is an essential stage of cyanobacterial blooms. High calcium concentration can promote Microcystis aeruginosa aggregation behavior, but the mechanism of colony formation caused by calcium has rarely been reported. In this study, high calcium-induced colony formation was identified as a shift from cell adhesion to cell division, rather than only cell adhesion as previously thought. Algae responded to this calcium-induced environmental pressure by aggregating and forming colonies. Algal cells initially secreted large quantities of extracellular polysaccharides (EPS) and rapidly aggregated by cell adhesion. The highest aggregation proportion was up to 68.93%. However, high calcium concentrations cannot completely inhibit algal cell growth, but only delay the algae into the rapid growth phase. With adaption to calcium and existing high EPS content, the daughter cells reduced EPS synthesis and the aggregation proportion decreased. The increasing growth rate was also responsible for the decreased xylose content in EPS. The mechanism of colony formation changed to cell division. The downregulation of genes related to EPS secretion also supported this hypothesis. Overall, these results can benefit for our understanding of cyanobacterial bloom formation.

Genomic and proteomic insights into the heavy metal bioremediation by cyanobacteria

Heavy metals (HMs) pose a global ecological threat due to their toxic effects on aquatic and terrestrial life. Effective remediation of HMs from the environment can help to restore soil's fertility and ecological vigor, one of the key Sustainable Development Goals (SDG) set by the United Nations. The cyanobacteria have emerged as a potential option for bioremediation of HMs due to their unique adaptations and robust metabolic machineries. Generally, cyanobacteria deploy multifarious mechanisms such as biosorption, bioaccumulation, activation of metal transporters, biotransformation and induction of detoxifying enzymes to sequester and minimize the toxic effects of heavy metals. Therefore, understanding the physiological responses and regulation of adaptation mechanisms at molecular level is necessary to unravel the candidate genes and proteins which can be manipulated to improve the bioremediation efficiency of cyanobacteria. Chaperons, cellular metabolites (extracellular polymers, biosurfactants), transcriptional regulators, metal transporters, phytochelatins and metallothioneins are some of the potential targets for strain engineering. In the present review, we have discussed the potential of cyanobacteria for HM bioremediation and provided a deeper insight into their genomic and proteomic regulation of various tolerance mechanisms. These approaches might pave new possibilities of implementing genetic engineering strategies for improving bioremediation efficiency with a future perspective.

Potassium supplement enhanced cadmium removal in a Microcystis aeruginosa photobioreactor: Evidence from actual and simulated wastewater

In this study, a Microcystis aeruginosa-based photobioreactor (M. aeruginosa-based PBR) was developed for the removal of cadmium (Cd²⁺) from diluted actual mine wastewater (DW) and Cd²⁺-contained simulated wastewater (SW), with a uniform Cd²⁺ concentration of 0.5 mg/L. For the DW and SW, both K⁺ -abundant (DWA & SWA) and K⁺-insufficient (DWB & SWB) treatments were conducted. It was found that continuous supplementation of K⁺ benefited Cd²⁺ removal. The Cd²⁺ removal efficiency in SWA reached 70% during the 41 days of operation, which was 20% higher than that in the SWB. The K⁺ addition triggered great higher Cd²⁺ removal efficiency (90%) in the DWA in comparison to the SWA. The Cd²⁺ assimilation by M. aeruginosa and Cd²⁺ retention on M. aeruginosa surface were the primary processes involved in the PBR system. The K⁺ starvation triggered a 45% and 43% loss of M. aeruginosa biomass in the DWA and the DWB, respectively. Hence, the Cd²⁺ removal efficiency in DWB increased significantly, and this was attributed to the increased abundance of non-living cells and enhanced bioretention of Cd²⁺. The results revealed that continuous K⁺ supplementation enhanced the Cd²⁺ removal efficiency in the M. aeruginosa-based PBR jointly by prompting algal cell growth, Cd²⁺ assimilation and biosorption, as well as Cd²⁺ retention on the algal cells.

Effects of different fluid fields on the formation of cyanobacterial blooms

Cyanobacterial blooms have been attracting more and more attention, and the mechanism is widely studied. However, the effects of fluid fields on the bloom formation were rarely reported. In this study, the effects of fluid fields formed under different external conditions were investigated. The results indicated that low wind speed (3 m/s) was conducive to the formation of cyanobacterial blooms, while high wind speed (6 m/s) was adverse. For low wind speed, an upward fluid field was detected by particle image velocimetry. This fluid field accelerated the algal growth by 58.6%, and improved the buoyancy by up-regulating the genes involved in the synthesis of gas vesicles and extracellular polymeric substances. In addition, the boundary shear stress induced the colony formation of cyanobacteria and improved the aggregation proportion significantly (p < 0.05), which was beneficial to bloom formation. As a result, cyanobacterial blooms are more likely to form on the lake shore under moderate breeze. When wind speed increased to 6 m/s, a downward fluid field was formed, causing algal cells to gather at the bottom and hindering the bloom formation. These results provided a theoretical basis for field researches related to the formation of cyanobacterial blooms and the treatment of cyanobacteria.

Humic acid inhibits colony formation of the cyanobacterium Microcystis at high level of iron

Colony formation is a key process for the occurrence of Microcystis blooms. In order to inhibit colony formation of Microcystis at high level of iron using humic acid, unicellular Microcystis aeruginosa was cultivated in laboratory treated with varying concentrations of iron and humic acid. Our results showed that the extracellular polysaccharides (EPS) content and average colony size increased from 0.57 pg cells^-1 and 4.0 μm to 0.93 pg cells^-1 and 26.1 μm, respectively, while iron concentration increased from 0.68 mg L^-1 to 6.8 mg L^-1, suggesting that high level of iron stimulated EPS secretion and induced unicellular Microcystis to form colonies. Transcriptome analysis showed that two genes described as glycosyltransferases (BH695-2217 and BH695-3696) were significantly up-regulated while EPS content increased with increasing iron concentration indicating that iron may regulate the expression of genes involved in polysaccharide synthesis. When treated with 10 mg C L^-1 humic acid at high level of iron, the EPS content and average colony size decreased by 35.5% and 56.3%, respectively, revealing that humic acid inhibited EPS secretion under high level of iron condition, and ultimately inhibited colony formation of Microcystis. Our results suggested that humic acid could be used as an agentia inhibiting large colony formation of Microcystis and thereby reducing the occurrence of Microcystis blooms.

The influence of a static magnetic field on a Chlorella vulgaris - Bacillus licheniformis consortium and its sewage treatment effect

In this study, the influence of a static magnetic field (SMF) on a Chlorella vulgaris-Bacillus licheniformis consortium and the subsequent effect of this algal-bacterial consortium on sewage treatment were explored. Accordingly, the algal density, Fv/Fm, algal aggregation percentage, extracellular polymeric substances (EPS) content, dissolved organic matter distribution, enzymatic activity, metabolites, microbial community diversity and nutrient removal were investigated. For the treatment group exposed to an SMF of 150 mT, the total phosphorus removal rate reached 82.21%, which was 19.10% higher than the control group. On the last day, the algal density of the 150 mT group was the highest, being 56.01% greater than the control group. The high intensity SMF promoted the anti-oxidative stress response in C. vulgaris. It also affected EPS secretion, subsequently influencing the algal aggregation percentage and bacterial growth. Bacillus accounted for the largest proportion of the overall microbial community in the 150 mT group, which was conducive to rapid formation of the C. vulgaris-B. licheniformis consortium. In short, the SMF was conducive to the rapid formation of a C. vulgaris-B. licheniformis consortium. The use of an SMF can promote the efficiency of the algal-bacterial consortium, thereby shortening the processing time.

A Novel Jumbo Phage PhiMa05 Inhibits Harmful Microcystis sp

Microcystis poses a concern because of its potential contribution to eutrophication and production of microcystins (MCs). Phage treatment has been proposed as a novel biocontrol method for Microcystis. Here, we isolated a lytic cyanophage named PhiMa05 with high efficiency against MCs-producing Microcystis strains. Its burst size was large, with approximately 127 phage particles/infected cell, a short latent period (1 day), and high stability to broad salinity, pH and temperature ranges. The PhiMa05 structure was composed of an icosahedral capsid (100 nm) and tail (120 nm), suggesting that the PhiMa05 belongs to the Myoviridae family. PhiMa05 inhibited both planktonic and aggregated forms of Microcystis in a concentration-dependent manner. The lysis of Microcystis resulted in a significant reduction of total MCs compared to the uninfected cells. A genome analysis revealed that PhiMa05 is a double-stranded DNA virus with a 273,876 bp genome, considered a jumbo phage. Out of 254 predicted open reading frames (ORFs), only 54 ORFs were assigned as putative functional proteins. These putative proteins are associated with DNA metabolisms, structural proteins, host lysis and auxiliary metabolic genes (AMGs), while no lysogenic, toxin and antibiotic resistance genes were observed in the genome. The AMGs harbored in the phage genome are known to be involved in energy metabolism [photosynthesis and tricarboxylic acid cycle (TCA)] and nucleotide biosynthesis genes. Their functions suggested boosting and redirecting host metabolism during viral infection. Comparative genome analysis with other phages in the database indicated that PhiMa05 is unique. Our study highlights the characteristics and genome analysis of a novel jumbo phage, PhiMa05. PhiMa05 is a potential phage for controlling Microcystis bloom and minimizing MC occurrence.

Single and combined effects of microplastics and lead on the freshwater algae Microcystis aeruginosa

Recently, the pollution of microplastics (MPs) in the global freshwater environment has become increasingly problematic, but there are few studies on the freshwater environment risks of MPs. The present study, therefore, has investigated the single and combined effects of MPs and lead (Pb) on the freshwater algal Microcystis aeruginosa. Results showed that Pb-only (>0.05 mg·L^-1) promoted the growth of algal cells, while MPs-only (1 mg L^-1) resulted in growth inhibition. However, compared with the corresponding concentration of Pb-only groups, the growth of algal cells was promoted in MPs + Pb treatments. MPs-only and Pb-only (0.5 mg L^-1) both reduced the content of photosynthetic pigments and affected algal photosynthesis. The MPs-only treatment and MPs + Pb²⁺ (no pretreatment, 0.5 mg L^-1 Pb²⁺) treatments showed significant cell aggregation. At the same time, MPs-only caused a significant increase in bound extracellular polysaccharides (bEPS), while 0.5 mg L^-1 Pb reduced bEPS. Furthermore, under high Pb stress (0.5 mg L^-1), the effects of combined MPs and Pb on chlorophyll content, antioxidant enzyme activity (peroxidase (POD), catalase (CAT)), and damage to algal cells were less compared to individual effects, and the combination of MPs and Pb had a synergistic effect on promoting aggregations of M. aeruginosa. These results demonstrate that single and combined effects of MPs and Pb can induce differential responses in the freshwater algal M. aeruginosa, which can have a significant impact on aquatic ecosystems.

Progress in our understanding of plant responses to the stress of heavy metal cadmium

Heavy metal pollution is a major environmental stress affecting plant growth and development. The heavy metal cadmium inhibits various physiological processes in plants, including seed germination and seedling growth, photosynthesis, and antioxidation. Extensive research has been conducted on the toxic effects of Cd²⁺ on plants and the mechanisms of Cd²⁺ tolerance. Here, we review recent advancements in our understanding of the absorption, transport, and accumulation of Cd²⁺ in plants and the mechanisms of Cd²⁺ tolerance.

A possible environmental-friendly removal of Microcystis aeruginosa by using pyroligneous acid

Cyanobacteria blooms are crucial environmental issues by threatening both aquatic ecosystem and human health. A biomass by-product with antimicrobial activity, pyroligneous acid (PA) was tested for its suitability for removal of the cyanobacteria Microcystis aeruginosa (M. aeruginosa) in this work. Results show that the removal efficiency could reach up to 90% in the presence of 0.45% of PA and the inhibition to M. aeruginosa growth could extend to at least 40 days. The removal mechanism was studied. Both organic acids and phenols are functional content in M. aeruginosa removal and acetic acid is the most important one. Zeta potential analysis and morphology study show that the damage of cells dominates the flocculation and sedimentation of M. aeruginosa under low PA concentration (<0.7%), and increasing PA (≥0.7%) resulted in a trend of zeta potential to zero, thus removing any "shield" and triggering flocculation. Finally, study on the phenols residual after M. aeruginosa treatment shows that it could be close to 0 in 70 h. Therefore, this work proposes a possible method for world-wide treatment of cyanobacteria bloom and a new way for further utilization of PA.

Co-Occurrence of Cyanobacteria and Cyanotoxins with Other Environmental Health Hazards: Impacts and Implications

Toxin-producing cyanobacteria in aquatic, terrestrial, and aerial environments can occur alongside a wide range of additional health hazards including biological agents and synthetic materials. Cases of intoxications involving cyanobacteria and cyanotoxins, with exposure to additional hazards, are discussed. Examples of the co-occurrence of cyanobacteria in such combinations are reviewed, including cyanobacteria and cyanotoxins plus algal toxins, microbial pathogens and fecal indicator bacteria, metals, pesticides, and microplastics. Toxicity assessments of cyanobacteria, cyanotoxins, and these additional agents, where investigated in bioassays and in defined combinations, are discussed and further research needs are identified.