Assessing the effects of elevated ozone on physiology, growth, yield and quality of soybean in the past 40 years: A meta-analysis

Production of Dichloroacetonitrile from Derivatives of Isoxaflutole Herbicide during Water Treatment

The herbicide isoxaflutole has the potential to contaminate drinking water directly, as well as upon hydrolyzing to its active form diketonitrile. Diketonitrile also may impact water quality by acting as a precursor for dichloroacetonitrile (DCAN), which is an unregulated but highly toxic disinfection byproduct (DBP). In this study, we investigated the reaction of diketonitrile with free chlorine and chloramine to form DCAN. We found that diketonitrile reacts with free chlorine within seconds but reacts with chloramine on the time scale of hours to days. In the presence of both oxidants, DCAN was generated at yields up to 100%. Diketonitrile reacted fastest with chlorine at circumneutral pH, which was consistent with base-catalyzed halogenation involving the enolate form of diketonitrile present at alkaline pH and electrophilic hypochlorous acid, which decreases in abundance above its pKa (7.5). In contrast, we found that diketonitrile reacts faster with chloramine as pH values decreased, consistent with an attack on the enolate by electrophilic protonated monochloramine that increases in abundance at acidic pH approaching its pKa (1.6). Our results indicate that increasing isoxaflutole use, particularly in light of the recent release of genetically modified isoxaflutole-tolerant crops, could result in greater occurrences of a high-yield DCAN precursor during disinfection.

Enhanced persulfate activation by ethylene glycol-mediated bimetallic sulfide for imidacloprid degradation

CuFeS2 is regarded as a promising catalyst for heterogeneous activation to remove organic contaminants in wastewater. However, effects of solvents in regulating material synthesis and catalytic activity are still not clear. Herein, we reported the role of water, ethanol, ethylene glycol (EG), glycerol, and polyethylene glycol 200 on the synthesis of CuFeS2 micro-flowers and their performance in activating persulfate (PS) to remove imidacloprid (IMI) pesticide. The results showed that the solvent had an effect on the morphology, crystallinity, yields, specific surface areas and unpaired electrons of CuFeS2 micro-flowers. The degradation experiments revealed the efficient catalytic activity of EG-mediated CuFeS2 for heterogeneous PS activation. SO4•- and •OH were identified in EG-CuFeS2/PS system and •OH (90.4%) was the dominant reactive species. Meanwhile, stable 20% of η[PMSO2] (the molar ratio of PMSO2 generation to PMSO consumption) was achieved and demonstrated that Fe(IV) was also involved in the degradation process. Moreover, S2- promoted the cycling of Fe3+/Fe2+ and Cu2+/Cu+, enhancing the synergistic activation and reusability of the catalyst. Density functional theory (DFT) calculations verified that PS was adsorbed by Fe atom and electron transfer occurred on the catalyst surface. Three possible degradation pathways of IMI were proposed by analysis of the degradation intermediates and their toxicities were evaluated by ECOSAR. This study not only provides a theoretical foundation for catalyst design, but also promotes the industrial application of bimetallic sulfide Fenton-like catalysts for water management.

Remediation technologies for neonicotinoids in contaminated environments: Current state and future prospects

Neonicotinoids (NEOs) are synthetic insecticides with broad-spectrum insecticidal activity and outstanding efficacy. However, their extensive use and persistence in the environment have resulted in the accumulation and biomagnification of NEOs, posing significant risks to non-target organisms and humans. This review provides a summary of research history, advancements, and highlighted topics in NEOs remediation technologies and mechanisms. Various remediation approaches have been developed, including physiochemical, microbial, and phytoremediation, with microbial and physicochemical remediation being the most extensively studied. Recent advances in physiochemical remediation have led to the development of innovative adsorbents, photocatalysts, and optimized treatment processes. High-efficiency degrading strains with well-characterized metabolic pathways have been successfully isolated and cultured for microbial remediation, while many plant species have shown great potential for phytoremediation. However, significant challenges and gaps remain in this field. Future research should prioritize isolating, domesticating or engineering high efficiency, broad-spectrum microbial strains for NEO degradation, as well as developing synergistic remediation techniques to enhance removal efficiency on multiple NEOs with varying concentrations in different environmental media. Furthermore, a shift from pipe-end treatment to pollution prevention strategies is needed, including the development of green and economically efficient alternatives such as biological insecticides. Integrated remediation technologies and case-specific strategies that can be applied to practical remediation projects need to be developed, along with clarifying NEO degradation mechanisms to improve remediation efficiency. The successful implementation of these strategies will help reduce the negative impact of NEOs on the environment and human health.

Synergistic activation of persulfate by FeS@SBA-15 for imidacloprid degradation: Efficiencies, activation mechanism and degradation pathways

In this work, FeS supported SBA-15 mesoporous silica catalyst (FeS@SBA-15) was synthesized successfully, characterized and first applied to persulfate (PS) activation for the degradation of imidacloprid in wastewater. The as-prepared 3.5-FeS@SBA-15 presented an impressive imidacloprid removal efficiency of 93.1% and reaction stoichiometric efficiency (RSE) of 1.82% after 5 min, ascribed to the synergetic effects of improved FeS dispersion and abundant surface sites by SBA-15. Electron paramagnetic resonance spectra and quenching experiments proved that both SO4·- and ·OH were produced in FeS@SBA-15/PS system, and SO4·- played a dominant role in the degradation process. The S2- can accelerate the cycling of Fe(III)/Fe(II) during activation and increase the steady-state concentration of Fe(II). More importantly, the constructed heterogeneous system exhibited an efficient and stable catalytic activity over a wide range of pH (3.0-9.0), temperature (283K-313K), inorganic ion (NO3-) and humic acid (1-20 mg/L). Moreover, the density functional theory calculations were conducted to predict the potential reaction sites of imidacloprid. Based on eighteen identified intermediates, four main degradation pathways were proposed: hydroxylation, dechlorination, hydrolysis, and the ring cleavage of the imidazolidine. ECOSAR analysis indicated hydroxylation and dechlorination played a key role in the detoxification of the formed compounds. These findings would provide new insights into the application of FeS@SBA-15 catalyst in wastewater treatment and the removal mechanism of imidacloprid from wastewater.

Insights into the ubiquity, persistence and microbial intervention of imidacloprid

Imidacloprid, a neonicotinoid pesticide, is employed to increase crop productivity. Meanwhile, its indiscriminate application severely affects the non-target organisms and the environment. As an eco-friendly and economically workable option, the microbial intervention has garnered much attention. This review concisely outlines the toxicity, long-term environmental repercussions, degradation kinetics, biochemical pathways, and interplay of genes implicated in imidacloprid remediation. The studies have highlighted imidacloprid residue persistence in the environment for up to 3000 days. In view of high persistence, effective intervention is highly required. Bacteria-mediated degradation has been established as a viable approach with Bacillus spp. being among the most efficient at 30 ℃ and pH 7. Further, a comparative metagenomic investigation reveals dominant neonicotinoid degradation genes in agriculture compared to forest soils with distinctive microbial communities. Functional metabolism of carbohydrates, amino acids, fatty acids, and lipids demonstrated a significantly superior relative abundance in forest soil, implying its quality and fertility. The CPM, CYP4C71v2, CYP4C72, and CYP6AY3v2 genes that synthesize cyt p450 monooxygenase enzyme play a leading role in imidacloprid degradation. In the future, a systems biology approach incorporating integrated kinetics should be utilized to come up with innovative strategies for moderating the adverse effects of imidacloprid on the environment.

Ecotoxicological effect of enrofloxacin on Spirulina platensis and the corresponding detoxification mechanism

Enrofloxacin is a widely used antibiotic targeting DNA gyrase and has become the commonly detected micropollutant in aquatic environments. Thus, the potential toxicity of enrofloxacin to Spirulina platensis which is a kind of prokaryote similar to Gram-negative bacteria has been hypothesized. However, little is known about the toxicity and degradation mechanism of enrofloxacin during the growth process of Spirulina platensis. Herein, the biomass accumulation of Spirulina platensis was stimulated to 115% of the control group by 0.1 mg L^-1 enrofloxacin (10th day), which could be removed probably through the metabolism. Further increasing the enrofloxacin level to 5.0 mg L^-1 almost inhibited the growth and remediation ability of Spirulina platensis for 35 days. Environmental stress also caused the variations of photosynthetic pigments (chlorophyll a and carotenoids) and primary biocomponents (proteins, lipids, and carbohydrates), reflecting the adaptation of Spirulina platensis for handling the negative effects of enrofloxacin. The detoxification mechanism was studied by identifying the degradation products of enrofloxacin, suggesting the occurrence of dealkylation and oxidation reactions primarily at the piperazine group. The decreased antimicrobial activity was confirmed by the reduced binding affinity of degradation products with enzymes. The obtained results could help us understand the role of enrofloxacin in the growth of Spirulina platensis, thus providing great support for employing Spirulina platensis in risk assessment and hazard reduction.

Improving the Quality of Reclaimed Water via Applying Spirulina platensis to Eliminate Residual Nitrate

The application of reclaimed water has been recognized as the key approach for alleviating water scarcity, while its low quality, such as high nitrogen content, still makes people worry about the corresponding ecological risk. Herein, we investigated the feasibility of removing residual nitrate from reclaimed water by applying Spirulina platensis. It is found that 15 mg/L total nitrogen could be decreased to 1.8 mg/L in 5 days, equaling 88.1 % removal efficiency under the optimized conditions. The deficient phosphorus at 0.5-1.0 mg/L was rapidly eliminated but was already sufficient to support nitrate removal by S. platensis. The produced ammonia is generally below 0.2 mg/L, which is much lower than the standard limit of 5 mg/L. In such a nutrient deficiency condition, S. platensis could maintain biomass growth well via photosynthesis. The variation of pigments, including chlorophyll a and carotenoids, suggested a certain degree of influences of illumination intensity and phosphorus starvation on microalgae. The background cations Cu²⁺ and Zn²⁺ exhibited significant inhibition on biomass growth and nitrate removal; thus, more attention needs to be paid to the further application of microalgae in reclaimed water. Our results demonstrated that cultivation of S. platensis should be a very promising solution to improve the quality of reclaimed water by efficiently removing nitrate and producing biomass.

Permanganate Oxidation of Organic Contaminants and Model Compounds

Permanganate oxidation is an attractive environmental remediation strategy due to its low cost, ease of use, and wide range in reactivity. Here, permanganate reactivity trends are investigated for model organic compounds and organic contaminants. Second-order permanganate reaction rate constants were compiled for 215 compounds from 82 references (journal articles, conference proceedings, master's theses, and dissertations). Additionally, we validated some phenol rate constants and contribute a few additional phenol rate constants. Commonalities between contaminant oxidation products are also discussed, and we tentatively identify several model compound oxidation products. Aromatic rings, alcohols, and ether groups had low reaction rate constants with permanganate. Alkene reaction sites had the highest reaction rate constants, followed by phenols, anilines, and benzylic carbon-hydrogen bonds. Generally, permanganate reactivity follows electrophilic substitution trends at the reaction site where electron donating groups increase the rate of reaction, while electron withdrawing groups decrease the rate of reaction. Solution conditions, specifically, buffer type and concentration, may impact the rate of reaction, which could be due to either an ionic strength effect or the buffer ions acting as ligands. The impact of these solution conditions, unfortunately, precludes the development of a quantitative structure-activity relationship for permanganate reaction rate constants with the currently available data. We note that critical experimental details are often missing in the literature, which posed a challenge when comparing rate constants between studies. Future research directions on permanganate oxidation should seek to improve our understanding of buffer effects and to identify oxidation products for model compounds so that extrapolations can be made to more complex contaminant structures.

Unveiling the mechanism of imidacloprid removal by ferrate(VI): Kinetics, role of oxidation and adsorption, reaction pathway and toxicity assessment

Imidacloprid (IMI), an emerging pollutant, has high toxicity to non-target organisms. This paper presents the kinetics of IMI removal by ferrate(VI) at different pH (6.0-9.0), molar ratios ([ferrate(VI)]:[IMI]) and added Fe(III) ions. The apparent second-order rate constant (k_app) decreased with increase in pH from pH 6.0 to 9.0 (i.e., (1.2 ± 0.1) × 10² M^-1 s^-1 to (8.3 ± 0.3) M^-1 s^-1). The species-specific rate constants were obtained as k (HFeO₄^-) = 1.3 × 10² M^-1 s^-1 and k (FeO₄^2-) = 6.9 M^-1 s^-1. The decreases in the concentration of HFeO₄^- with increase in pH caused the observed pH dependence in k_app. At pH 7.0, the removal of IMI increased with the molar ratio from 1.0 to 10.0 with complete removal at the highest ratio. The variation in pH from 6.0 to 9.0 had no obvious effect on removal of IMI. Experiments indicate that IMI removal is mainly by ferrate(VI) oxidation and to a lesser extent by Fe(III) adsorption. Mineralization of IMI was also observed (20-26%). The addition of Fe(III) ions to ferrate(VI)-IMI at pH 7.0 and 8.0 resulted in enhanced removal of IMI, but the presence of Ca²⁺, SO₄^2-, HCO₃^-, and humic acid (HA) has negative effects. The presence of coexisting substances in river water slightly decreased IMI removal by ferrate(VI) by less than 10%. Identification of products and frontier electron density (FED) calculations demonstrated involvement of opening of the five-membered heterocyclic moiety of IMI by ferrate(VI). Toxicity assessment with NIH 3T3 fibroblasts and ECOSAR analysis indicated lower toxicity of oxidized products than parent IMI.

Residual concentrations and ecological risks of neonicotinoid insecticides in the soils of tomato and cucumber greenhouses in Shouguang, Shandong Province, East China

Neonicotinoid insecticides (NNIs) are the most widely used insecticides in China and worldwide. Continuous use of NNIs can lead to their accumulation in soil, causing potential ecological risks due to their relatively long half-life. We used liquid chromatography-tandem mass spectrometry (LC-MS/MS) to investigate the residual levels of nine neonicotinoids in greenhouse soils in Shouguang, East China, at different soil depths and with different crops (tomato and cucumber) after varying periods of cultivation. Seven neonicotinoids were detected in the soils of the tomato greenhouses and six were detected in the soils of the cucumber greenhouses, with total concentrations ranging from 0.731 to 11.383 μg kg^-1 and 0.363 to 19.224 μg kg^-1, respectively. In all samples, the neonicotinoid residues in the soils cultivated for 8-9 years were lower than in those cultivated for 2 years and 14-17 years. In the tomato greenhouse soils, the residual levels of NNIs were highest in the topsoil, with progressively lower concentrations found with depth. Under cucumber cultivation, the NNI residue levels were also highest in the topsoil but there was little difference between the middle and lower soil layers. Total organic carbon (TOC) decreased with soil depth while pH showed the opposite trend, showing a significant negative correlation in both types of soils (tomato soils ρ = -0.900, p = .001; cucumber soils ρ = -0.883, p = .002). Furthermore, TOC was significantly positively correlated, and pH was negatively correlated, with total NNI concentrations in both types of soils (TOC: tomato soils ρ = 0.800, p = .010; cucumber soils ρ = 0.881, p = .004; pH: tomato soils ρ = -0.850, p = .004; cucumber soils ρ = -0.643, p = .086). The results of an ecological risk analysis showed that acetamiprid represents a particularly high toxicity risk in these soils. Based on our analysis, NNI residues in the soils of tomato greenhouses and their associated ecological risks deserve more attention than those of cucumber greenhouse soils.

Insights into the Toxicity and Degradation Mechanisms of Imidacloprid Via Physicochemical and Microbial Approaches

Imidacloprid is a neonicotinoid insecticide that has been widely used to control insect pests in agricultural fields for decades. It shows insecticidal activity mainly by blocking the normal conduction of the central nervous system in insects. However, in recent years, imidacloprid has been reported to be an emerging contaminant in all parts of the world, and has different toxic effects on a variety of non-target organisms, including human beings, due to its large-scale use. Hence, the removal of imidacloprid from the ecosystem has received widespread attention. Different remediation approaches have been studied to eliminate imidacloprid residues from the environment, such as oxidation, hydrolysis, adsorption, ultrasound, illumination, and biodegradation. In nature, microbial degradation is one of the most important processes controlling the fate of and transformation from imidacloprid use, and from an environmental point of view, it is the most promising means, as it is the most effective, least hazardous, and most environmentally friendly. To date, several imidacloprid-degrading microbes, including Bacillus, Pseudoxanthomonas, Mycobacterium, Rhizobium, Rhodococcus, and Stenotrophomonas, have been characterized for biodegradation. In addition, previous studies have found that many insects and microorganisms have developed resistance genes to and degradation enzymes of imidacloprid. Furthermore, the metabolites and degradation pathways of imidacloprid have been reported. However, reviews of the toxicity and degradation mechanisms of imidacloprid are rare. In this review, the toxicity and degradation mechanisms of imidacloprid are summarized in order to provide a theoretical and practical basis for the remediation of imidacloprid-contaminated environments.