TiO2 nanoparticles dose, application method and phosphorous levels influence genotoxicity in Rice (Oryza sativa L.), soil enzymatic activities and plant growth

Alleviated lead toxicity in rice plant by co-augmented action of genome doubling and TiO2 nanoparticles on gene expression, cytological and physiological changes

Lead is a very toxic and futile heavy metal for rice plants because of its injurious effects on plant growth and metabolic processes. Polyploidy or whole genome doubling increases the ability of plants to withstand biotic and abiotic stress. Considering the beneficial effects of nanoparticles and tetraploid rice, this research was conducted to examine the effectiveness of tetraploid and titanium dioxide nanoparticles (TiO2 NPs) in mitigating the toxic effects of lead. A diploid (E22-2x) and it's tetraploid (T-42) rice line were treated with Pb (200 μM) and TiO2 NPs (15 mg L-1). Lead toxicity dramatically reduced shoot length (16 % and 4 %) and root length (17 % and 9 %), biological yield (55 % and 36 %), and photosynthetic activity, as evidenced by lower levels of chlorophyll a and b (30 % and 9 %) in E-22 and T-42 rice cultivars compared to the control rice plants, respectively. Furthermore, lead toxicity amplified the levels of reactive oxygen species (ROS), such as malondialdehyde and H2O2, while decreasing activities of all antioxidant enzymes, such as superoxidase, peroxidase, and glutathione predominately in the diploid cultivar. Transmission electron microscopy and semi-thin section observations revealed that Pb-treated cells in E22-2x had more cell abnormalities than T-42, such as irregularly shaped mitochondria, cell wall, and reduced root cell size. Polyploidy and TiO2 reduced Pb uptake in rice cultivars and expression levels of metal transporter genes such as OsHMA9 and OsNRAMP5. According to the findings, genome doubling alleviates Pb toxicity by reducing Pb accumulation, ROS, and cell damage. Tetraploid rice can withstand the toxic effect of Pb better than diploid rice, and TiO2 NPs can alleviate the toxic impact of Pb. Our study findings act as a roadmap for future research endeavours, directing the focus toward risk management and assessing long-term impacts to balance environmental sustainability and agricultural growth.

Less is more: The hormetic effect of titanium dioxide nanoparticles on plants

Titanium dioxide nanoparticles have attracted considerable attention due to their extensive applications; however, their multifaceted influence on plant physiology and the broader environment remains a complex subject. This review systematically synthesizes recent studies on the hormetic effects of TiO2 nanoparticles on plants - a phenomenon characterized by dual dose-response behavior that impacts various plant functions. It provides crucial insights into the molecular mechanisms underlying these hormetic effects, encompassing their effects on photosynthesis, oxidative stress response and gene regulation. The significance of this article consists in its emphasis on the necessity to establish clear regulatory frameworks and promote international collaboration to standardize the responsible adoption of nano-TiO2 technology within the agricultural sector. The findings are presented with the intention of stimulating interdisciplinary research and serving as an inspiration for further exploration and investigation within this vital and continually evolving field.

Photosynthesis governed by nanoparticulate titanium dioxide. The Pisum sativum L. case study

Wide availability of anthropogenic TiO2 nanoparticles facilitates their penetration into environment and prompts interactions with plants. They alter plants growth and change their nutritional status. In particular, metabolic processes are affected. In this work the effect of nanometric TiO2 on photosynthesis efficiency in green pea (Pisum sativum L.) was studied. Hydroponic cultivations with three Ti levels (10; 50 and 100 mg L-1) were applied. At all concentrations nanoparticles penetrated into plant tissues and were detected by the single particle ICP-MS/MS method. Nanoparticles altered the CO2 assimilation rate and gas exchange parameters (i.e. transpiration, stomatal conductance, sub-stomatal CO2 concentration). The most pronounced effects were observed for Ti 50 mg L-1 cultivation where photosynthesis efficiency, transpiration and stomatal conductance were increased by 14.69%, 4.58% and 8.92%, respectively. They were further confirmed by high maximum ribulose 1,5-bisphosphate carboxylation rate (27.40% increase), maximum electron transport rate (21.51% increase) and the lowest CO2 compensation point (45.19% decrease). Furthermore, concentrations of Cu, Mn, Zn, Fe, Mg, Ca, K and P were examined with the most pronounced changes observed for elements directly involved in photosynthesis (Cu, Zn, Mn, and Fe). The Cu concentrations in roots, stems and leaves for Ti 50 mg L-1 cultivation were below the control by 33.15%, 38.28% and 10.76%, respectively. The Zn content in analogous treatment and organs decreased by 30.24%, 26.69% and 13.35%. The Mn and Fe levels in leaves were increased by 72.22% and 50.32%, respectively. Our results indicated that plant defence mechanisms which restrain the water uptake have been overcome in pea by photocatalytic activity of nanoparticulate TiO2 which stimulated photosynthesis. On the contrary to the substantial stomatal conductance, the transpiration has been reduced because exceptional part of water flow was already consumed in chloroplasts and could not have been freed to the atmosphere.

Co-application of TiO2 nanoparticles and hyperaccumulator Brassica juncea L. for effective Cd removal from soil: Assessing the feasibility of using nano-phytoremediation

Nano-phytoremediation is anticipated as a potential technology for the remediation of heavy metals from soil sites. This study evaluated the feasibility of using titanium dioxide nanoparticles (TiO2 NPs) at various concentrations (0, 100, 250, 500 mg/kg) along with a hyperaccumulator, Brassica juncea L., for effective removal of Cadmium (Cd) from the soil. Plants were grown for a whole life cycle in soil containing 10 mg/kg of Cd and spiked TiO2 NPs. We analyzed the plants for Cd tolerance, phytotoxicity, Cd removal, and translocation. Brassica plants displayed high Cd tolerance with a significant increase in plant growth, biomass, and photosynthetic activity in a concentration-dependent manner. Cd removal from the soil at TiO2 NPs concentrations of 0, 100, 250, and 500 mg/kg treatment was 32.46%, 11.62%, 17.55%, and 55.11%, respectively. The translocation factor for Cd was found to be 1.35, 0.96, 3.73, and 1.27 for 0, 100, 250, and 500 mg/kg concentrations. The results of this study indicate that TiO2 NPs applications in the soil can minimize Cd stress in plants and lead to its efficient removal from soil. Thus, the association of nanoparticles with the phytoremediation process can lead to good application prospects for the remediation of contaminated soil.

Nanotoxicity assessment in plants: an updated overview

Nanotechnology is rapidly emerging and innovative interdisciplinary field of science. The application of nanomaterials in agricultural biotechnology has been exponentially increased over the years that could be attributed to their uniqueness, versatility, and flexibility. The overuse of nanomaterials makes it crucial to determine their fate and distribution in the in vitro (in cell and tissue cultures) and in vivo (in living species) biological environments by investigating the nano-biointerface. The literature states that the beneficial effects of nanoparticles come along with their adverse effects, subsequently leading to an array of short-term and long-term toxicities. It has been evident that the interplay of nanoparticles with abiotic and biotic communities produces several eco-toxicological effects, and the physiology and biochemistry of crops are greatly influenced by the metabolic alterations taking place at cellular, sub-cellular, and molecular levels. Numerous risk factors affect nanoparticle's accumulation, translocation, and associated cytogenotoxicity. This review article summarizes the contributing factors, possible mechanisms, and risk assessment of hazardous effects of various types of nanoparticles to plant health. The methods for evaluating the plant nanotoxicity parameters have been elaborated. Conclusively, few recommendations are put forward for designing safer, high-quality nanomaterials to protect and maintain environmental safety for smarter agriculture demanded by researchers and industrialists.

Bio-fabrication of zinc oxide nanoparticles from Picea smithiana and their potential antimicrobial activities against Xanthomonas campestris pv. Vesicatoria and Ralstonia solanacearum causing bacterial leaf spot and bacterial wilt in tomato

Due to an inevitable disadvantage of chemical or physical synthesis routes, biosynthesis approach to nanoparticles, especially metallic oxide is attractive nowadays. Metallic oxides nanoparticles present a new approach to the control of plant pathogens. ZnO nanoparticles (ZNPs) have very important role in phytopathology. In current study, biosynthesized ZNPs were tested against two devastating bacterial pathogens including Xanthomonas campestris pv. vesicatoria and Ralstonia solanacearum causing bacterial leaf spot and bacterial wilt in tomato. ZNPs were produced using a new extract from the plant Picea smithiana using an environmentally friendly, cost-effective and simple procedure. Zinc acetate was added to P. smithiana extract, stirred and heated to 200 °C. The white precipitation at the bottom were clear indication of synthesis of nanoparticles, which were further dried by subjecting them at 450 °C. X-ray diffraction pattern determined that the ZNPs had a crystallite size of about 26 nm, Fourier transform infrared spectroscopy indicated a peak between 450 and 550 cm^-1 and the particle size estimated by dynamic light scattering was about 25 nm on average. Scanning electron microscopic analysis indicated that the particles were hexagonal in shape 31 nm in diameter. Antibacterial tests showed ZNPs synthesized by P. smithiana resulted in clear inhibition zones of 20.1 ± 1.5 and 18.9 ± 1.5 mm and 44.74 and 45.63% reduction in disease severity and 78.40 and 80.91% reduction in disease incidence in X. compestris pv. vesicatoria and R. solanacearum respectively at concentration of 100 µg/ml. Our findings reveal that the concentration of ZNPs was important for their efficient antibacterial activity. Overall, the biosynthesized ZNPs have been found to have effective antimicrobial activities against bacterial wilt and bacterial leaf spot in tomato.

Phytoaccumulation of cadmium by Pelargonium × hortorum - tolerance and metal recovery

The main aim of the present study was to assess the removal of cadmium (Cd) from contaminated soil by using Pelargonium × hortorum - an ornamental plant. Furthermore, the genotoxic impacts of Cd on plant was evaluated, and accumulated Cd in shoots were recovered as Cd-nanoparticles. For this purpose, a pot experiment was carried out with Cd (0-150 mg/kg) spiked soil. P. hortorum was grown for 24 weeks in a greenhouse. Subsequently, harvested root/shoot biomass and Cd concentration in root/shoot were determined. The micronucleus assay was performed to assess the genotoxicity of Cd within the selected plant. Accumulated Cd in shoots was recovered as Cd-nanoparticles and was characterized by SEM and XRD. Exposure to Cd exhibited a phytotoxic impact by reducing the plant biomass, but plant survived at higher Cd concentrations and the tolerance index was greater than 60% at a higher Cd level (150 mg/kg). Moreover, 257 mg/kg of Cd in aerial parts was observed, and maximum Cd uptake (120 mg plant^-1) by P. hortorum was found at 150 mg/kg Cd. Plants exposed to Cd exhibited genotoxic impact by increasing the number of micronuclei by 59% at a higher Cd level (150 mg/kg) and the mitotic index was reduced by 20%. Furthermore, recovered nanoparticles were spherically shaped with an average size of 36.2-355 nm. The plant has potential for the removal of Cd and has exhibited good tolerance.

Potential Effects of Metal Oxides on Agricultural Production of Rice: A Mini Review

The extensive usage of metal oxide nanoparticles has aided in the spread and accumulation of these nanoparticles in the environment, potentially endangering both human health and the agroecological system. This research describes in detail the hazardous and advantageous impacts of common metal oxide nanomaterials, such as iron oxide, copper oxide, and zinc oxide, on the life cycle of rice. In-depth analyses are conducted on the transport patterns of nanoparticles in rice, the plant's reaction to stress, the reduction of heavy metal stress, and the improvement of rice quality by metal oxide nanoparticles, all of which are of significant interest in this subject. It is emphasized that from the perspective of advancing the field of nanoagriculture, the next stage of research should focus more on the molecular mechanisms of the effects of metal oxide nanoparticles on rice and the effects of combined use with other biological media. The limitations of the lack of existing studies on the effects of metal oxide nanomaterials on the entire life cycle of rice have been clearly pointed out.

TiO2 Nanoparticles and Their Effects on Eukaryotic Cells: A Double-Edged Sword

Nanoparticulate TiO₂ (TiO₂ NPs) is a widely used material, whose potential toxicity towards eukaryotic cells has been addressed by multiple studies. TiO₂ NPs are considered toxic due to their production of reactive oxygen species (ROS), which can, among others, lead to cellular damage, inflammatory responses, and differences in gene expression. TiO₂ NPs exhibited toxicity in multiple organs in animals, generating potential health risks also in humans, such as developing tumors or progress of preexisting cancer processes. On the other hand, the capability of TiO₂ NPs to induce cell death has found application in photodynamic therapy of cancers. In aquatic environments, much has been done in understanding the impact of TiO₂ on bivalves, in which an effect on hemocytes, among others, is reported. Adversities are also reported from other aquatic organisms, including primary producers. These are affected also on land and though some potential benefit might exist when it comes to agricultural plants, TiO₂ can also lead to cellular damage and should be considered when it comes to transfer along the food chain towards human consumers. In general, much work still needs to be done to unravel the delicate balance between beneficial and detrimental effects of TiO₂ NPs on eukaryotic cells.

Prediction models on biomass and yield of rice affected by metal (oxide) nanoparticles using nano-specific descriptors

The use of in silico tools to investigate the interactions between metal (oxide) nanoparticles (NPs) and plant biological responses is preferred because it allows us to understand molecular mechanisms and improve prediction efficiency by saving time, labor, and cost. In this study, four models (C5.0 decision tree, discriminant function analysis, random forest, and stepwise multiple linear regression analysis) were applied to predict the effect of NPs on rice biomass and yield. Nano-specific descriptors (size-dependent molecular descriptors and image-based descriptors) were introduced to estimate the behavior of NPs in plants to appropriately represent the wide space of NPs. The results showed that size-dependent molecular descriptors (e.g., E-state and connectivity indices) and image-based descriptors (e.g., extension, area, and minimum ferret diameter) were associated with the behavior of NPs in rice. The performance of the constructed models was within acceptable ranges (correlation coefficient ranged from 0.752 to 0.847 for biomass and from 0.803 to 0.905 for yield, while the accuracy ranged from 64% to 77% for biomass and 81% to 89% for yield). The developed model can be used to quickly and efficiently evaluate the impact of NPs under a wide range of experimental conditions and sufficient training data.

Titanium and Zinc Based Nanomaterials in Agriculture: A Promising Approach to Deal with (A)biotic Stresses?

Abiotic stresses, such as those induced by climatic factors or contaminants, and biotic stresses prompted by phytopathogens and pests inflict tremendous losses in agriculture and are major threats to worldwide food security. In addition, climate changes will exacerbate these factors as well as their negative impact on crops. Drought, salinity, heavy metals, pesticides, and drugs are major environmental problems that need deep attention, and effective and sustainable strategies to mitigate their effects on the environment need to be developed. Besides, sustainable solutions for agrocontrol must be developed as alternatives to conventional agrochemicals. In this sense, nanotechnology offers promising solutions to mitigate environmental stress effects on plants, increasing plant tolerance to the stressor, for the remediation of environmental contaminants, and to protect plants against pathogens. In this review, nano-sized TiO₂ (nTiO₂) and ZnO (nZnO) are scrutinized, and their potential to ameliorate drought, salinity, and xenobiotics effects in plants are emphasized, in addition to their antimicrobial potential for plant disease management. Understanding the level of stress alleviation in plants by these nanomaterials (NM) and relating them with the application conditions/methods is imperative to define the most sustainable and effective approaches to be adopted. Although broad-spectrum reviews exist, this article provides focused information on nTiO₂ and nZnO for improving our understanding of the ameliorative potential that these NM show, addressing the gaps in the literature.

Mixed Nanocomposite Fertilizers Influencing Endophytic Symbiosis and Nutritional and Antioxidant Properties of Oryza sativa as a Sustainable Alternative for Commercial Fertilizers

This study investigated the comparative effects of mixed nanocomposite (MNC) fertilizers as an alternative to commercial fertilizers (CFs) on endophytic symbiosis and nutritional properties of rice grains. We synthesized MNC fertilizers with different concentrations and characterized them by using scanning electron microscopy and Fourier transform infrared spectroscopy. The CF was applied as per the method followed by local farmers; however, for MNC fertilizers both foliar and soil applications were done. Comparative analysis of growth and development, rice-endophyte symbiosis, and nutritional properties of rice grains was conducted. The panicles per hill, length of panicles, grain per panicles, 1000-grain weight, and dry matter of rice plants treated with MNC fertilizers were found to be not statistically (p > 0.05) different compared to those of CF. However, growth parameters were significantly (p < 0.05) higher in MNC fertilizer-treated crops than in CF-treated crops. Several predominant endophytes such as Penicillium spp., Aspergillus fumigatus, Rhizopus spp., and Fusarium spp. that could have significant effects on the enhancement of growth and nutritional properties of rice grains were identified in rice plants treated with MNC fertilizers at different concentrations. Contrarily, stem-associated Cercospora spp. was found in the CF-treated field and fission yeast was observed in the blank-treated field. In addition, the contents of proteins, fibers, carbohydrates, energy-yielding components, vitamin A, and minerals were significantly increased in rice plants treated with MNC fertilizers. Thus, we would like to conclude that MNC fertilizers could be one of the most potential alternatives to CFs for achieving better rice-endophyte symbiosis as well as nutritional improvements in rice grains for sustainable production.

Explicating the cross-talks between nanoparticles, signaling pathways and nutrient homeostasis during environmental stresses and xenobiotic toxicity for sustainable cultivation of cereals

Precision farming using nanoparticles is a cutting-edge technology for safe cultivation of crop plants in marginal areas afflicted with environmental/climatic stresses like salinity, drought, extremes of temperature, ultraviolet B stress or polluted with xenobiotics like toxic heavy metals and fluoride. Major cereal crops like rice, wheat, maize, barley, sorghum and millets which provide the staple food for the entire global population are mainly glycophytes and are extremely susceptible to abiotic stress-induced oxidative injuries. Nanofertilization/exogenous spraying of beneficial nanoparticles alleviates the oxidative damages in cereals by altering the homeostasis of phytohormones like abscisic acid, gibberellins, cytokinins, auxins, salicylic acid, jasmonic acid and melatonin and by triggering the synthesis of gasotransmitter nitric oxide. Signaling cross-talks of nanoparticles with plant growth regulators enable activation of the defence machinery, comprising of antioxidants, thiol-rich compounds and glyoxalases and restrict xenobiotic mobilization by suppressing the expression of associated transporters. Accelerated nutrient uptake and grain biofortification under the influence of nanoparticles result in optimum crop productivity under sub-optimal conditions. However, over-dosing of even beneficial nanoparticles promotes severe phytotoxicity. Hence, the concentration of nanoparticles and mode of administering need to be thoroughly standardized before large-scale field applications, to ensure sustainable cereal cultivation with minimum ecological imbalance.

Removal of levofloxacin from aqueous solution by green synthesized magnetite (Fe3O4) nanoparticles using Moringa olifera: Kinetics and reaction mechanism analysis

Levofloxacin antibiotic is frequently being detected in the environment and regarded as an emerging contaminant. The present study was focused on the green synthesis of magnetite (Fe₃O₄ - gINPs) nanoparticles from Moringa olifera and its efficiency for removal of levofloxacin from aqueous solution. The adsorbent magnetite nanoparticles (Fe₃O₄) were prepared by green synthesis using Moringa olifera and coprecipitation method. Characterizations analyses of both chemically and green synthesized nanoparticles were performed by SEM, XRD, and FTIR. The average crystallite size of gINPs was 14.34 nm and chemically synthesized was 18.93 nm. The performance of the synthesized product was evaluated by adsorption capacity and removal efficiency. The parameters considered included adsorbent (gINPs) dosage, initial concentration of adsorbate, pH, contact time, and temperature. The obtained data were fitted to kinetic and isotherm models to determine the mechanism. Adsorption batch experiments were conducted to determine the reaction mechanism by studying kinetics while fitting isotherm models for samples analyzed using HPLC at 280 nm. Results showed that 86.15% removal efficiency of 4 mg L^-1 levofloxacin was achieved by 100 mg L^-1 gINPs in 24 h contact time when all other parameters (pH 7, temperature 25 °C) were kept constant. The maximum adsorption capacity achieved at equilibrium was 22.47 mg/g. Further, it was identified as a pseudo-second-order model with R² = 0.965 for adsorption kinetics while isotherm data better fitted to the Freundlich model compared to Langmuir isotherm with R² = 0.994. The potential pathway determined for levofloxacin removal was chemisorption with minor diffusion, multilayer, spontaneous and exothermic processes on the gINPs (Fe₃O₄). Reusability experiments were conducted in four cycles and removal efficiency varied from 85.35% to 80.47%, indicating very high potential of the adsorbent for re-use.

Graphene quantum dot and iron co-doped TiO2 photocatalysts: Synthesis, performance evaluation and phytotoxicity studies

The present study reports the synthesis, photocatalytic decolorization of reactive black 5 dye and phytotoxicity of graphene quantum dots (GQDs) and iron co-doped TiO₂ photocatalysts via modified sol gel method. GQDs were synthesized by direct pyrolysis of citric acid (CA). Scanning electron microscopy (SEM) and energy dispersion spectroscopy (EDS), Raman spectroscopy, atomic force microscopy (AFM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), diffuse reflectance spectroscopy (DRS), Brunauer-Emmett-Teller (BET) and photoluminescence spectroscopy (PL) were used to determine the physicochemical properties of the best performing photocatalysts. The results indicated improved physicochemical properties of GQD-0.1Fe-TiO₂-300 with root mean square roughness (Rz) (33.82 nm), higher surface area (170.79 m² g^-1), pore volume (0.08 cm³ g^-1), and bandgap (2.94 eV). Moreover, GQD-0.1Fe co-doping of TiO₂ greatly improved the photocatalytic decolorization efficiency for RB5 dye. The photocatalytic reaction followed the pseudo first order reaction with gradual decrease in K_app values for increment in RB5 concentration. The K_C value was obtained as 2.45 mg L^-1 min^-1 while the K_LH value was 0.45 L mg^-1 indicating the heterogeneous reaction system followed the Langmuir-Hinshelwood isotherm and simultaneously occurring adsorption and photocatalytic processes. Photocatalytic reaction mechanism studies exhibited the holes and OH radicals as the main active species in the GQD-0.1Fe-TiO₂-300 responsible for the decolorization of RB5. The proposed reaction pathway showed that both Fe-TiO₂ and GQDs play important role in generation of electrons and holes. Additionally, GQD-0.1Fe-TiO₂-300 were durable up to four cycles. Phytotoxicity assay displayed that treated water and best performing photocatalysts had no effect on Lycopersicon esculentum seed germination. Therefore, the proposed system can pave a viable solution for safe usage of dye loaded wastewater and effluent for irrigation after treatment.

Comparative Study between Traditional and Nano Calcium Phosphate Fertilizers on Growth and Production of Snap Bean (Phaseolus vulgaris L.) Plants

Recently, nanofertilizers are being tested as a new technology, either for soil or foliar applications, to improve food production and with a reduced environmental impact. Nano calcium phosphate (NCaP) was successfully synthesized, characterized and applied in this study. A pot experiment was carried out in two successive seasons in 2016 and 2017 on (Phaseolus vulgaris L.) plants to obtain the best phosphorus treatments. The results were applied in a field experiment during the 2018-2019 season. Single superphosphate (SSP) at 30 and 60 kg P₂O₅ fed^-1 and NCaP at 10%, 20% and 30% from the recommended dose were applied to the soil. Foliar application involved both monoammonium phosphate (MAP) at one rate of 2.5 g L^-1 and NCaP at 5% and 10% from the MAP rate. The results of all experiments showed that NCaP significantly increased the shoot and root dry weights, the nutrient content in the shoot and root, the yield components, the nutrient concentration and crude protein percentage in pods of the snap bean plants compared with traditional P. The greatest increase was obtained from a 20% NCaP soil application in combination with a 5% NCaP foliar application. The present study recommends using NCaP as an alternative source of P to mitigate the negative effects of traditional sources.

Biosynthesis and characterization of titanium dioxide nanoparticles and its effects along with calcium phosphate on physicochemical attributes of wheat under drought stress

Drought stress is reducing the production of crops globally. This research was designed to evaluate the role of titanium dioxide (TiO₂ NPs) nanoparticles and calcium phosphate on wheat facing drought stress. TiO₂ NPs were prepared by green synthesis and their characterization (by UV-visible spectroscopy, scanning electron microscopy (SEM), and energy-dispersive X-ray (EDX)) was also done. The results showed that TiO₂ NPs worked efficiently and improved plant growth under drought. However, the best results were obtained from combined applications of 40 ppm TiO₂ NPs and 40 ppm calcium phosphate on plants. They increased root length (33%), shoot length (53%), fresh weight (48%), and dry weight (44%) of wheat as compared to control. The physiological parameters including chlorophyll content, relative water content, membrane stability index, and osmolyte content (proline and sugar) were also improved. The increase in superoxide dismutase, peroxidase and, catalase activity by the combined application of TiO₂ NPs and calcium phosphate was 83% and 78%, 74% and 52%, 81%, and 67% in Pakistan-13 and Zincol-16 respectively, as compared to untreated drought exposed plants. They also enhanced the nutrients uptake (including potassium, phosphorus, and nitrogen) that ultimately improved plant biomass. They also maintained the level of growth hormones in plants. These hormones regulate cellular processes and are responsible for germination, development, and plant reaction in drought stress. The increase in the yield was also significant, hence it is recommended that the 40 ppm concentration of TiO₂ NPs along with calcium phosphate improves the productivity of wheat under drought stress.

Multi-element uptake and growth responses of Rice (Oryza sativa L.) to TiO2 nanoparticles applied in different textured soils

The aim of present work was to evaluate the effects of titanium dioxide nanoparticles (TiO₂ NPs) on rice's growth (Oryza sativa L.) and nutrient availability under different soil textures. Greenhouse experiment was carried out with three soil textures (sandy loam, silt loam and silty clay loam) and two concentrations of TiO₂ NPs (500, 750 mg kg^-1). Control (without TiO₂ NPs) was also maintained for the comparison. Growth parameters including chlorophyll content, root/shoot length, fresh/dry biomass and nutrients' uptake including calcium (Ca), copper (Cu), iron (Fe), magnesium (Mg), phosphorous (P), potassium (K) and zinc (Zn) were determined. The results revealed that application of 500 mg kg^-1 TiO₂ NPs in silty clay loam soil increased the chlorophyll content (3.3-folds), root length (49%), shoot length (31%), root and shoot biomass (41% & 39%, respectively) as compared to other soil textures. The maximum plant growth was observed in silty clay loam > silt loam > sandy loam. Concentration of Cu, Fe, P and Zn in shoot was increased by 8 - , 2.3 - , 0.4 - , 0.05 -folds in silty clay loam upon 500 mg kg^-1 TiO₂ NPs application as compared to the control. Backward selection method to model the parameters (nutrients in soil) for the response variables (root/shoot length and biomass) showed that Ca, Fe, P are the main nutrients responsible for the increase in plant length and biomass. Overall, the growth of rice was better in silty clay loam at 500 mg kg^-1 of TiO₂ NPs.