BODIPYs to the rescue: Potential applications in photodynamic inactivation

Dialdehyde cellulose films covalently crosslinked with porphyrin-based covalent organic polymers for photodynamic sterilization

Foodborne pathogens result in a great harm to human, which is an urgent problem to be addressed. Herein, a novel cellulose-based packaging films with excellent anti-bacterial properties under visible light were prepared. A porphyrin-based covalent organic polymer (Por-COPs) was constructed, then covalently grafted onto dialdehyde cellulose (DAC). The addition of Por-COPs enhanced the mechanical, hydrophobicity, and water resistance of the DAC-based composite films. DAC/Por-COP-2.5 film exhibited outstanding properties for the photodynamic inactivation of bacteria under visible light irradiation, delivering inactivation efficiencies of 99.90 % and 99.45 % towards Staphylococcus aureus and Escherichia coli within 20 min. The DAC/Por-COPs films efficiently generated •O2- and 1O2 under visible light, thereby causing oxidative stress to cell membranes for bacterial inactivation. The prepared composite film forms a protective barrier against bacterial contamination. Results guide the development of high performance and more sustainable packaging films for the food sector.

Porphyrin-BODIPY Dyad: Enhancing Photodynamic Inactivation via Antenna Effect

A porphyrin-BODIPY dyad (P-BDP) was obtained through covalent bonding, featuring a two-segment design comprising a light-harvesting antenna system connected to an energy acceptor unit. The absorption spectrum of P-BDP resulted from an overlap of the individual spectra of its constituent parts, with the fluorescence emission of the BODIPY unit experiencing significant quenching (96 %) due to the presence of the porphyrin unit. Spectroscopic, computational, and redox investigations revealed a competition between photoinduced energy and electron transfer processes. The dyad demonstrated the capability to sensitize both singlet molecular oxygen and superoxide radical anions. Additionally, P-BDP effectively induced the photooxidation of L-tryptophan. In suspensions of Staphylococcus aureus cells, the dyad led to a reduction of over 3.5 log (99.99 %) in cell survival following 30 min of irradiation with green light. Photodynamic inactivation caused by P-BDP was also extended to the individual bacterium level, focusing on bacterial cells adhered to a surface. This dyad successfully achieved the total elimination of the bacteria upon 20 min of irradiation. Therefore, P-BDP presents an interesting photosensitizing structure that takes advantage of the light-harvesting antenna properties of the BODIPY unit combined with porphyrin, offering potential to enhance photoinactivation of bacteria.

Theranostic Fluorescent Probes

The ability to gain spatiotemporal information, and in some cases achieve spatiotemporal control, in the context of drug delivery makes theranostic fluorescent probes an attractive and intensely investigated research topic. This interest is reflected in the steep rise in publications on the topic that have appeared over the past decade. Theranostic fluorescent probes, in their various incarnations, generally comprise a fluorophore linked to a masked drug, in which the drug is released as the result of certain stimuli, with both intrinsic and extrinsic stimuli being reported. This release is then signaled by the emergence of a fluorescent signal. Importantly, the use of appropriate fluorophores has enabled not only this emerging fluorescence as a spatiotemporal marker for drug delivery but also has provided modalities useful in photodynamic, photothermal, and sonodynamic therapeutic applications. In this review we highlight recent work on theranostic fluorescent probes with a particular focus on probes that are activated in tumor microenvironments. We also summarize efforts to develop probes for other applications, such as neurodegenerative diseases and antibacterials. This review celebrates the diversity of designs reported to date, from discrete small-molecule systems to nanomaterials. Our aim is to provide insights into the potential clinical impact of this still-emerging research direction.

Defective copper-based metal-organic frameworks for the efficient extraction of organosulfur compounds from garlic-processing wastewater

Organosulfur compounds (OSCs) in garlic-processing wastewater are decomposed and generated to toxic and harmful substances with unpleasant odors under anaerobic conditions. Herein, were report the successful development of novel copper-based metal organic framework (Cu-MOF) adsorbents with high adsorption capacities for OSCs in aqueous media. Defect-rich Cu-MOF-X samples, with particle sizes between 360 and 750 nm, synthesized hydrothermal in the presence of acetic acid (where X denotes the molar ratio of acetic acid relative to the pentadentate MOF linker H4PPYD). OSC adsorption experiments using allicin, ajoene and 2-ethenyl-4H-1,3-dithiine (2-VDT) showed that Cu-MOF-200 delivered fast adsorption kinetics and high OSC adsorption capacities (149.02-171.33 mg g-1) owing to the pore accessibility and range of adsorption sites in the MOF. FT-IR, Raman, and XPS analyses, together with density functional theory (DFT) calculations, verified the strong yet reversible adsorption of OSCs in Cu-MOF-200. Results guide the development of improved adsorbents for OSC capture from garlic-processing wastewater.

Porphyrin-based covalent organic polymers with customizable photoresponses for photodynamic inactivation of bacteria

Porphyrin-linked covalent organic polymers (COPs) provide a reliable photocatalytic platform, while photodynamic inactivation (PDI) induced by reliable porphyrin-based COPs is considered to be an effective method to resist microbial contamination. Herein, three tunable porphyrin-based covalent organic polymers (H2-Por-COPs, OH-Por-COPs, and Zn-Por-COPs) are designed and employed for the PDI of Staphylococcus aureus and Escherichia coli under visible light illumination. Interestingly, singlet oxygen (1O2) generation by the Por-COPs can be manipulated via intramolecular regulation with the order Zn-Por-COP > OH-Por-COP > H2-Por-COP. With rationally tune, the Zn-Por-COP demonstrated remarkable antibacterial activity against Staphylococcus aureus (kill percentage 99.65 % ± 0.24 %) and Escherichia coli (kill percentage 97.25 % ± 1.78 %) in only 15 min under visible-light irradiation. Density functional theory (DFT) calculations and photophysical tests showed that the presence of electron-donating -OH groups on the aromatic linkers and Zn2+ ions in porphyrin units narrowed the HOMO-LUMO gap, enhancing both light absorption, intersystem crossing (ISC) and 1O2 generation for more efficient bacteria inactivation. This work can be applied to efficiently screen suitable photosensitizers and provides a rational regulatory strategy for PDI of pathogenic bacteria.

Cyanoarylporphyrazine dyes: multimodal compounds for personalised photodynamic therapy

Photodynamic therapy is known as an effective primary and adjuvant anticancer treatment. Compounds with improved properties or additional modalities are still needed to create an 'ideal' photosensitizer. In this article, we review cyanoarylporphyrazine dyes for photodynamic (anticancer) therapy that we have synthesised to date. The review provides information on the chemistry of cyanoarylporphyrazines, photophysical properties, cellular uptake features and the use of various carriers for selective delivery of cyanoarylporphyrazines to the tumour. The potential of cyanoarylporphyrazines as photodynamic anti-tumour agents also has been evaluated. The most interesting feature of cyanoarylporphyrazines is the dependence of the fluorescence quantum yield and excited state lifetime on the viscosity of the medium, which makes it possible to use them as viscosity sensors in photodynamic therapy. In the future, we expect that the unique combination of photosensitizer and viscosity sensor properties of cyanoarylporphyrazines will provide a tool for dosimetry and tailoring treatment regimens in photodynamic therapy to the individual characteristics of each patient.

8(meso)-Pyridyl-BODIPYs: Effects of 2,6-Substitution with Electron-Withdrawing Nitro, Chloro, and Methoxycarbonyl Groups

The introduction of electron-withdrawing groups on 8(meso)-pyridyl-BODIPYs tends to increase the fluorescence quantum yields of this type of compound due to the decrease in electronic charge density on the BODIPY core. A new series of 8(meso)-pyridyl-BODIPYs bearing a 2-, 3-, or 4-pyridyl group was synthesized and functionalized with nitro and chlorine groups at the 2,6-positions. The 2,6-methoxycarbonyl-8-pyridyl-BODIPYs analogs were also synthesized by condensation of 2,4-dimethyl-3-methoxycarbonyl-pyrrole with 2-, 3-, or 4-formylpyridine followed by oxidation and boron complexation. The structures and spectroscopic properties of the new series of 8(meso)-pyridyl-BODIPYs were investigated both experimentally and computationally. The BODIPYs bearing 2,6-methoxycarbonyl groups showed enhanced relative fluorescence quantum yields in polar organic solvents due to their electron-withdrawing effect. However, the introduction of a single nitro group significantly quenched the fluorescence of the BODIPYs and caused hypsochromic shifts in the absorption and emission bands. The introduction of a chloro substituent partially restored the fluorescence of the mono-nitro-BODIPYs and induced significant bathochromic shifts.

Identification of a luminescent platinum(II) complex with BODIPY derivative as novel photodynamic therapy agent for triple negative breast cancer cells

Triple-negative breast cancer (TNBC) is one of the most malignant breast tumors for its poor prognosis and high tumor recurrence. It is urgent to develop new strategy or effective agents to overcome resistance and improve therapeutic effectiveness. Boron-dipyrromethene (BODIPY) based photosensitizers possess exciting photophysical features suitable for theranostic applications, namely, photodynamic therapy (PDT). We have designed a luminescent monofunctional platinum(II) complex with BODIPY derivative, namely I₂BC-Pt, as novel high PDT agent against triple negative breast cancer (TNBC). The di-iodinated BODIPY complex I₂BC-Pt showed excellent PDT effect against TNBC cells in green light (520 nm) giving IC₅₀ values of 0.11-0.13 μM in MDA-MB-231 and MDA-MB-468 cells. I₂BC-Pt predominately aggregated in the mitochondria of MDA-MB-231 cells and emitted green fluorescence. Besides, the anticancer mechanism studies demonstrated that I₂BC-Pt could help DNA repair through attenuating RAD51, FoxM1 and BRCA1/2, and induce p53-mediated apoptosis of TNBC cells. Taken together, I₂BC-Pt could be potentially developed as a BODIPY-based photosensitizers for TNBC therapy.

Bromo- and glycosyl-substituted BODIPYs for application in photodynamic therapy and imaging

The introduction of heavy atoms into the BODIPY-core structure has proven to be a straightforward strategy for optimizing the design of such dyes towards enhanced generation of singlet oxygen rendering them suitable as photosensitizers for photodynamic therapy (PDT). In this work, BODIPYs are presented by combining the concept of bromination with nucleophilic aromatic substitution (S_NAr) of a pentafluorophenyl or a 4-fluoro-3-nitrophenyl moiety to introduce functional groups, thus improving the phototoxic effect of the BODIPYs as well as their solubility in the biological environment. The nucleophilic substitution enabled functionalization with various amines and alcohols as well as unprotected thiocarbohydrates. The phototoxic activity of these more than 50 BODIPYs has been assessed in cellular assays against four cancer cell lines in order to more broadly evaluate their PDT potential, thus accounting for the known variability between cell lines with respect to PDT activity. In these investigations, dibrominated polar-substituted BODIPYs, particularly dibrominated glyco-substituted compounds, showed promising potential as photomedicine candidates. Furthermore, the cellular uptake of the glycosylated BODIPYs has been confirmed via fluorescence microscopy.

Tuning the Molecular Structure of Corroles to Enhance the Antibacterial Photosensitizing Activity

The increase in the antibiotic resistance of bacteria is a serious threat to public health. Photodynamic inactivation (PDI) of micro-organisms is a reliable antimicrobial therapy to treat a broad spectrum of complex infections. The development of new photosensitizers with suitable properties is a key factor to consider in the optimization of this therapy. In this sense, four corroles were designed to study how the number of cationic centers can influence the efficacy of antibacterial photodynamic treatments. First, 5,10,15-Tris(pentafluorophenyl)corrole (Co) and 5,15-bis(pentafluorophenyl)-10-(4-(trifluoromethyl)phenyl)corrole (Co-CF₃) were synthesized, and then derivatized by nucleophilic aromatic substitution with 2-dimethylaminoethanol and 2-(dimethylamino)ethylamine, obtaining corroles Co-3NMe₂ and Co-CF₃-2NMe₂, respectively. The straightforward synthetic strategy gave rise to macrocycles with different numbers of tertiary amines that can acquire positive charges in an aqueous medium by protonation at physiological pH. Spectroscopic and photodynamic studies demonstrated that their properties as chromophores and photosensitizers were unaffected, regardless of the substituent groups on the periphery. All tetrapyrrolic macrocycles were able to produce reactive oxygen species (ROS) by both photodynamic mechanisms. Uptake experiments, the level of ROS produced in vitro, and PDI treatments mediated by these compounds were assessed against clinical strains: methicillin-resistant Staphylococcus aureus and Klebsiella pneumoniae. In vitro experiments indicated that the peripheral substitution significantly affected the uptake of the photosensitizers by microbes and, consequently, the photoinactivation performance. Co-3NMe₂ was the most effective in killing both Gram-positive and Gram-negative bacteria (inactivation > 99.99%). This work lays the foundations for the development of new corrole derivatives having pH-activable cationic groups and with plausible applications as effective broad-spectrum antimicrobial photosensitizers.

Photoinactivation of Planktonic Cells, Pseudohyphae, and Biofilms of Candida albicans Sensitized by a Free-Base Chlorin and Its Metal Complexes with Zn(II) and Pd(II)

Invasive candidiasis is an important cause of morbidity and mortality, and its occurrence is increasing due to the growing complexity of patients. In particular, Candida albicans exhibits several virulence factors that facilitate yeast colonization in humans. In this sense, the photodynamic inactivation of yeasts is a promising new alternative to eliminate fungal infections. Herein, the photodynamic activity sensitized by a free-base chlorin (TPCF₁₆) and its complexes with Zn(II) (ZnTPCF₁₆) and Pd(II) (PdTPCF₁₆) was investigated in order to eliminate C. albicans under different forms of cell cultures. A decrease in cell survival of more than 5 log was found in planktonic cells incubated with 5 μM TPCF₁₆ or ZnTPCF₁₆ upon 15 min of white-light irradiation. The mechanism of action mainly involved a type II pathway in the inactivation of C. albicans cells. In addition, the photodynamic action induced by these chlorins was able to suppress the growth of C. albicans in a culture medium. These photosensitizers were also effective to photoinactivate C. albicans pseudohyphae suspended in PBS. Furthermore, the biofilms of C. albicans that incorporated the chlorins during the proliferation stage were completely eradicated using 5 μM TPCF₁₆ or ZnTPCF₁₆ after 60 min of light irradiation. The studies indicated that these chlorins are effective photosensitizing agents to eliminate C. albicans as planktonic cells, pseudohyphae, and biofilms.

Porphyrin Polymers Bearing N,N'-Ethylene Crosslinkers as Photosensitizers against Bacteria

The appearance of microbes resistant to antibiotics requires the development of alternative therapies for the treatment of infectious diseases. In this work two polymers, PTPPF₁₆-EDA and PZnTPPF₁₆-EDA, were synthesized by the nucleophilic aromatic substitution of 5,10,15,20-tetrakis(pentafluorophenyl)porphyrin and its Zn(II) complex with ethylenediamine, respectively. In these structures, the tetrapyrrolic macrocycles were N,N'-ethylene crosslinked, which gives them greater mobility. The absorption spectra of the polymers showed a bathochromic shift of the Soret band of ~10 nm with respect to the monomers. This effect was also found in the red fluorescence emission peaks. Furthermore, both polymeric materials produced singlet molecular oxygen with high quantum yields. In addition, they were capable of generating superoxide anion radicals. Photodynamic inactivation sensitized by these polymers was tested in Staphylococcus aureus and Escherichia coli bacteria. A decrease in cell viability greater than 7 log (99.9999%) was observed in S. aureus incubated with 0.5 μM photosensitizer upon 30 min of irradiation. Under these conditions, a low inactivation of E. coli (0.5 log) was found. However, when the cells were treated with KI, the elimination of the Gram-negative bacteria was achieved. Therefore, these polymeric structures are interesting antimicrobial photosensitizing materials for the inactivation of pathogens.

Photodynamic inactivation of Staphylococcus aureus in the presence of aggregation-prone photosensitizers based on BODIPY used at submicromolar concentrations

Two new brominated BODIPYs (1 and 2) bearing amino acid-based chains (l-valine for 1, and dimethyl-l-lysine for 2) were synthesized and characterized. In organic solvents, 1 and 2 were fully soluble and showed the photophysical properties expected for brominated BODIPY dyes, including efficient generation of singlet oxygen (¹O₂), upon irradiation. In contrast, in aqueous media, both compounds were prone to aggregation and the photo-induced generation of ¹O₂ was halted. Despite the lack of generation of this reactive species in aqueous media (in cuvette), both 1 and 2 have positive antimicrobial Photodynamic Inactivation (aPDI) effect. The activity against gram-positive Staphylococcus aureus and gram-negative Escherichia coli was determined through the inactivation curves, with a total energy dose of 5.3 J/cm² (white light LED used as an energy source). Compound 2 was highly active against both gram-positive and gram-negative bacteria (3 log CFU/mL reduction was obtained at 0.16 μM for S. aureus and 2.5-5.0 μM for E. coli), whereas 1 was less effective to kill S. aureus (3 log CFU/mL at 0.32 μM) and ineffective for E. coli. The higher efficiency of 2, as compared to 1, to reduce the population of bacteria, can reside in the presence of a protonatable residue in 2, allowing a more effective interaction of this molecule with the cell walls of the microorganisms. In order to explain the lack of reactivity in pure aqueous media (in cuvette) and the contrasting good activity in the presence of bacterial cells it can be hypothesized that upon interaction with the walls of the microorganisms, the aggregated photosensitizers suffer a disaggregation process restoring the ability to generate ¹O₂, and hence leading to efficient photodynamic activity against these pathogenic microorganisms, in agreement with the similar effect observed recently for porphyrinoid photosensitizers.

Microwave-assisted direct synthesis of BODIPY dyes and derivatives

A microwave-assisted one-pot synthesis of BODIPY dyes from pyrroles and acyl chlorides is reported. This protocol features short reaction times, low temperatures, minimum amount of solvent, scalability, versatility, and good yields of the products. These simple, efficient and sustainable conditions can be also applied to the synthesis of derivatives such as BOPHY, BOAHY and BOPAHY.

Sweet light o' mine: Photothermal and photodynamic inactivation of tenacious pathogens using conjugated polymers

Each year a rising number of infections can not be successfully treated owing to the increasing pandemic of antibiotic resistant pathogens. The global shortage of innovative antibiotics fuels the emergence and spread of drug resistant microbes. Basic research, development, and applications of alternative therapies are urgently needed. Since the 90´s, light-mediated therapies have promised to be the next frontier combating multidrug-resistance microbes. These platforms have demonstrated to be a reliable, rapid, and efficient alternative to eliminate tenacious pathogens while avoiding the emergence of resistance mechanisms. Among the materials showing antimicrobial activity triggered by light, conjugated polymers (CPs) have risen as the most promising option to tackle this complex situation. These materials present outstanding characteristics such as high absorption coefficients, great photostability, easy processability, low cytotoxicity, among others, turning them into a powerful class of photosensitizer (PS)/photothermal agent (PTA) materials. Herein, we summarize and discuss the advances in the field of CPs with applications in photodynamic inactivation and photothermal therapy towards bacteria elimination. Additionally, a section of current challenges and needs in terms of well-defined benchmark experiments and conditions to evaluate the efficiency of phototherapies is presented.

Nonbenzenoid BODIPY Analogues: Synthesis, Structural Organization, Photophysical Studies, and Cell Internalization of Biocompatible N-Alkyl-Aminotroponyl Difluoroboron (Alkyl-ATB) Complexes

The alkyl-BODIPY derivatives are lipid types of fluorescent molecules that exhibit a unique structure and functions including sensing of hydrophobic microenvironments in living cells. Their synthesis involves multisteps from the core structure dipyrromethene scaffold. The alkyl-BODIPY analogues are sought to derivatize with minimal synthetic steps even by altering the core structures derived from benzenoid aromatic moiety. Recently, the nonbenzenoid scaffold (aminotropone) has been explored to synthesize troponyl-BODIPY analogues, which are fluorescent. In the repertoire of nonbenzenoid analogue, N-alkyl-aminotroponyl difluoroboron (alkyl-ATB) is rationally designed comprising long-chain hydrocarbons to explore the lipid type of fluorescent molecules. This report describes the synthesis, photophysical studies, structural organization, and biocompatibilities of ATB derivatives containing different lengths of alkyl chain at 2-aminotropone scaffold. The photophysical studies of ATB derivatives reveal their fluorescence behaviors in organic solvents (CH₃OH/CH₃CN) with a quantum yield of ∼10 to 15%. These ATB derivatives also exhibit fluorescence characters in the solid state though their quantum yield is relatively low. Cell permeability and cytotoxicity studies reveal that alkyl-ATB derivatives are permeable to HeLa/HEK293T cell lines and show negligible cytotoxicity. The biocompatibility of alkyl-ATB derivatives is studied and confirmed by cell viability (MTT) assay to the HeLa/HEK293T cell lines. Importantly, the cell internalization studies of the representative alkyl-ATB molecule by fluorescence microscopy show that octyl-ATB is efficiently detectable at the cytoplasmic membrane and cellular nucleus in HeLa cells. Hence, alkyl-ATB derivatives are potential fluorescent molecules for developing probes to visualize cellular components under a fluorescence microscope.

Application of Fullerenes as Photosensitizers for Antimicrobial Photodynamic Inactivation: A Review

Antimicrobial photodynamic inactivation (aPDI) is a newly emerged treatment approach that can effectively address the issue of multidrug resistance resulting from the overuse of antibiotics. Fullerenes can be used as promising photosensitizers (PSs) for aPDI due to the advantages of high triplet state yields, good photostability, wide antibacterial spectrum, and permissibility of versatile functionalization. This review introduces the photodynamic activities of fullerenes and the up-to-date understanding of the antibacterial mechanisms of fullerene-based aPDI. The most recent works on the functionalization of fullerenes and the application of fullerene derivatives as PSs for aPDI are also summarized. Finally, certain remaining challenges are emphasized to provide guidance on future research directions for achieving clinical application of fullerene-based aPDI.

Red fluorescent BODIPY molecular rotor for high microviscosity environments

Microviscosity has a strong impact for diffusion-controlled processes in biological environments. BODIPY molecular rotors are viscosity-sensitive fluorophores that provide a simple and non-invasive way to visualise microviscosity. Although green fluorescent probes are already well developed for imaging, thick biological samples require longer wavelengths for investigation. This work focuses on the examination of novelβ-substitutedmeso-phenyl-BODIPYs possessing a red emission. We report a new red fluorescent BODIPY-based probe BP-Vinyl-NO₂suitable for sensing microviscosity in rigid environments of over 100 000 cP viscosities. Furthermore, we demonstrate that changing the methyl position fromorthotometaon theβ-phenyl-substituted conjugate BP-PH-m2M-NO₂redshifts absorbance and fluorescence spectra while maintaining viscosity sensitivity. Finally, we show that nitro-substitution ofmeso-phenyl is a versatile approach to improve the sensitivity to viscosity while suppressing sensitivity to polarity and temperature of such derivatives. In summary, we present two nitro-substituted red fluorescent probes that could be used as lifetime-based microviscosity sensors.

Design, Spectral Characteristics, Photostability, and Possibilities for Practical Application of BODIPY FL-Labeled Thioterpenoid

This paper presents the design and a comparative analysis of the structural and solvation factors on the spectral and biological properties of the BODIPY biomarker with a thioterpene fragment. Covalent binding of the thioterpene moiety to the butanoic acid residue of meso-substituted BODIPY was carried out to find out the membranotropic effect of conjugate to erythrocytes, and to assess the possibilities of its practical application in bioimaging. The molecular structure of the conjugate was confirmed via X-ray, UV/vis-, NMR-, and MS-spectra. It was found that dye demonstrates high photostability and high fluorescence quantum yield (to ~100%) at 514–519 nm. In addition, the marker was shown to effectively penetrate the erythrocytes membrane in the absence of erythrotoxicity. The conjugation of BODIPY with thioterpenoid is an excellent way to increase affinity dyes to biostructures, including blood components.

Searching for antimicrobial photosensitizers among a panel of BODIPYs

In recent years, antimicrobial Photodynamic Therapy (aPDT) gained increasing attention for its potential to inhibit the growth and spread of microorganisms, both as free-living cells and/or embedded in biofilm communities. In this scenario, compounds belonging to the family of boron-dipyrromethenes (BODIPYs) represent a very promising class of photosensitizers for applications in antimicrobial field. In this study, twelve non-ionic and three cationic BODIPYs were assayed for the inactivation of Staphylococcus aureus, Pseudomonas aeruginosa and Candida albicans. As expected, S. aureus showed to be very sensitive to BODIPYs and mild conditions were sufficient to reach good rates of photoinactivation with both neutral and monocationic ones. Surprisingly, one neutral compound (named B9 in this study) resulted the best BODIPY to photoinactivate P. aeruginosa PAO1. The photoinactivation of C. albicans was reached with both neutral and mono-cationic BODIPYs. Furthermore, biofilms of the three model microorganisms were challenged with BODIPYs in light-based antimicrobial technique. S. aureus biofilms were successfully inhibited with milder conditions than those applied to P. aeruginosa and C. albicans. Notably, it was possible to eradicate 24-h-old biofilms of both S. aureus and P. aeruginosa. In conclusion, this study supports the potential of neutral BODIPYs as pan-antimicrobial PSs.

Rational design and synthesis of a novel BODIPY-based probe for selective imaging of tau tangles in human iPSC-derived cortical neurons

Numerous studies have shown a strong correlation between the number of neurofibrillary tangles of the tau protein and Alzheimer's disease progression, making the quantitative detection of tau very promising from a clinical point of view. However, the lack of highly reliable fluorescent probes for selective imaging of tau neurofibrillary tangles is a major challenge due to sharing similar β–sheet motifs with homologous Amyloid-β fibrils. In the current work, we describe the rational design and the in silico evaluation of a small-size focused library of fluorescent probes, consisting of a BODIPY core (electron acceptor) featuring highly conjugated systems (electron donor) with a length in the range 13–19 Å at C3. Among the most promising probes in terms of binding mode, theoretical affinity and polarity, BT1 has been synthesized and tested in vitro onto human induced pluripotent stem cells derived neuronal cell cultures. The probe showed excellent photophysical properties and high selectivity allowing in vitro imaging of hyperphosphorylated tau protein filaments with minimal background noise. Our findings offer new insight into the structure-activity relationship of this class of tau selective fluorophores, paving the way for boosting tau tangle detection in patients possibly through retinal spectral scans.

Conjugate of meso-carboxysubstituted-BODIPY with thioterpenoid as an effective fluorescent probe: Synthesis, structure, spectral characteristics, and molecular docking

This paper is devoted to the design of a fluorescent probe based on meso-carboxysubstituted-BODIPY with a thioterpene fragment. The functional replacement of the methoxy group in the BODIPY molecule on a thioterpene fragment was carried out in order to find out the antiplatelet and anticoagulant action mechanisms of thioterpenoids and to assess the membrane and receptor factors contributions. The molecular structure of the conjugate was confirmed via UV/vis-, NMR- and MS-spectra. It is found that the probe is a high fluorescence quantum yield (to ∼ 100%) in the blue-green region at 509-516 nm. Molecular docking of all studied molecules showed that the BODIPY with terpenoid conjugation is an excellent way to increase their affinity to platelet receptor P2Y₁₂.

Antimicrobial Photosensitizing Material Based on Conjugated Zn(II) Porphyrins

The widespread use of antibiotics has led to a considerable increase in the resistance of microorganisms to these agents. Consequently, it is imminent to establish new strategies to combat pathogens. An alternative involves the development of photoactive polymers that represent an interesting strategy to kill microbes and maintain aseptic surfaces. In this sense, a conjugated polymer (PZnTEP) based on Zn(II) 5,10,15,20-tetrakis-[4-(ethynyl)phenyl]porphyrin (ZnTEP) was obtained by the homocoupling reaction of terminal alkyne groups. PZnTEP exhibits a microporous structure with high surface areas allowing better interaction with bacteria. The UV-visible absorption spectra show the Soret and Q bands of PZnTEP red-shifted by about 18 nm compared to those of the monomer. Also, the conjugate presents the two red emission bands, characteristic of porphyrins. This polymer was able to produce singlet molecular oxygen and superoxide radical anion in the presence of NADH. Photocytotoxic activity sensitized by PZnTEP was investigated in bacterial suspensions. No viable Staphylococcus aureus cells were detected using 0.5 µM PZnTEP and 15 min irradiation. Under these conditions, complete photoinactivation of Escherichia coli was observed in the presence of 100 mM KI. Likewise, no survival was detected for E. coli incubated with 1.0 µM PZnTEP after 30 min irradiation. Furthermore, polylactic acid surfaces coated with PZnTEP were able to kill efficiently these bacteria. This surface can be reused for at least three photoinactivation cycles. Therefore, this conjugated photodynamic polymer is an interesting antimicrobial photoactive material for designing and developing self-sterilizing surfaces.

Evolution of Phthalocyanine Structures as Photodynamic Agents for Bacteria Inactivation

Phthalocyanine derivatives have been proposed as photosensitizers for the treatment of several microbial infections. In this review, the progress in the structures of phthalocyanines was analyzed, considering that these compounds can easily functionalize and can form complexes with various metal ions. In this sense, different substituents were used to increase the interaction with the microorganisms, improving their photodynamic inactivation. Furthermore, these photosensitizers absorb strongly at phototherapeutic window, emit red fluorescence, and efficiently produce the formation of reactive oxygen species. Subsequently, the influence of binding, bacteria types, cell density, washing effect, and media on photoinactivation was remarked to elimination of microbes. Finally, photokilling of bacterial biofilm by phthalocyanines and the mechanism of action were discussed. Therefore, this review brings together the main features of phthalocyanines as antimicrobial phototherapeutic agents.

Discovery of Meso-(meta-Pyridinium) BODIPY Photosensitizers: In Vitro and In Vivo Evaluations for Antimicrobial Photodynamic Therapy

Antimicrobial photodynamic therapy (aPDT) has emerged as a novel and promising approach for the treatment of pathogenic microorganism infections. The efficacy of aPDT depends greatly on the behavior of the photosensitizer. Herein, we report the design, preparation, antimicrobial photodynamic activities, as well as structure-activity relationships of a series of photosensitizers modified at the meso position of a 1,3,5,7-tetramethyl BODIPY scaffold with various pyridinyl and pyridinium moieties. The photodynamic antimicrobial activities of all photosensitizers have been tested against Staphylococcus aureus, Escherichia coli, Candida albicans, and Methicillin-resistant S. aureus (MRSA). The methyl meso-(meta-pyridinium) BODIPY photosensitizer (3c) possessed the highest phototoxicity against these pathogens at minimal inhibitory concentrations (MIC) ranging from 0.63 to 1.25 μM with a light dose of 81 J/cm². Furthermore, 3c exhibited an impressive antimicrobial efficacy in S. aureus-infected mice wounds. Taken together, these findings suggest that 3c is a promising candidate as the antimicrobial photosensitizer for combating pathogenic microorganism infections.

Potentiation Effect of Iodine Species on the Antimicrobial Capability of Surfaces Coated with Electroactive Phthalocyanines

The spreading of different infections can occur through direct contact with glass surfaces in commonly used areas. Incorporating the use of alternative therapies in these materials seems essential to reduce and also avoid bacterial resistance. In this work, the capability to kill microbes of glass surfaces coated with two electroactive metalated phthalocyanines (ZnPc-EDOT and CuPc-EDOT) is assessed. The results show that both of these materials are capable of producing reactive oxygen species; however, the polymer with Zn(II) (ZnPc-PEDOT) has a singlet oxygen quantum yield 8-fold higher than that of the Cu(II) containing analogue. This was reflected in the in vitro experiments where the effectiveness of the surfaces was tested in bacterial suspensions, monitoring single microbe inactivation upon attachment to the polymers, and eliminating mature biofilms. Furthermore, we evaluated the use of an inorganic salt (KI) to potentiate the photodynamic inactivation mediated by an electropolymerized surface. The addition of the salt improved the efficiency of phototherapy at least two times for both polymers; nevertheless, the material coated with ZnPc-PEDOT was the only one capable of eliminating >99.98% of the initial microbes loading under different circumstances.

BOPHY-Fullerene C60 Dyad as a Photosensitizer for Antimicrobial Photodynamic Therapy

A novel BOPHY-fullerene C₆₀ dyad (BP-C₆₀ ) was designed as a heavy-atom-free photosensitizer (PS) with potential uses in photodynamic treatment and reactive oxygen species (ROS)-mediated applications. BP-C₆₀ consists of a BOPHY fluorophore covalently attached to a C₆₀ moiety through a pyrrolidine ring. The BOPHY core works as a visible-light-harvesting antenna, while the fullerene C₆₀ subunit elicits the photodynamic action. This fluorophore-fullerene cycloadduct, obtained by a straightforward synthetic route, was fully characterized and compared with its individual counterparts. The restricted rotation around the single bond connecting the BOPHY and pyrrolidine moieties led to the formation of two atropisomers. Spectroscopic, electrochemical, and computational studies disclose an efficient photoinduced energy/electron transfer process from BOPHY to fullerene C₆₀ . Photodynamic studies indicate that BP-C₆₀ produces ROS by both photomechanisms (type I and type II). Moreover, the dyad exhibits higher ROS production efficiency than its individual constitutional components. Preliminary screening of photodynamic inactivation on bacteria models (Staphylococcus aureus and Escherichia coli) demonstrated the ability of this dyad to be used as a heavy-atom-free PS. To the best of our knowledge, this is the first time that not only a BOPHY-fullerene C₆₀ dyad is reported, but also that a BOPHY derivative is applied to photoinactivate microorganisms. This study lays the foundations for the development of new BOPHY-based PSs with plausible applications in the medical field.

Latest trends on photodynamic disinfection of Gram-negative bacteria: photosensitizer's structure and delivery systems

Antimicrobial resistance is threatening to overshadow last century's medical advances. Etiological agents of previously eradicated infectious diseases are now resurgent as multidrug-resistant strains, especially for Gram-negative strains. Finding new therapeutic solutions is a real challenge for our society. In this framework, Photodynamic Antimicrobial ChemoTherapy relies on the generation of toxic reactive oxygen species in the presence of light, oxygen, and a photosensitizer molecule. The use of reactive oxygen species is common for disinfection processes, using chemical agents, such as chlorine and hydrogen peroxide, and as they do not have a specific molecular target, it decreases the potential of tolerance to the antimicrobial treatment. However, light-driven generated reactive species result in an interesting alternative, as reactive species generation can be easily tuned with light irradiation and several PSs are known for their low environmental impact. Over the past few years, this topic has been thoroughly studied, exploring strategies based on single-molecule PSs (tetrapyrrolic compounds, dipyrrinate derivatives, metal complexes, etc.) or on conjunction with delivery systems. The present work describes some of the most relevant advances of the last 6 years, focusing on photosensitizers design, formulation, and potentiation, aiming for the disinfection of Gram-negative bacteria.

Charge density distribution effect in pyrrolidine-fused chlorins on microbial uptake and antimicrobial photoinactivation of microbial pathogens

Two novels structurally related pyrrolidine-fused chlorins were synthesized from 5,10,15,20-tetrakis(pentafluorophenyl)chlorin by nucleophilic aromatic substitution of the para-fluoro groups. The reaction with 2-dimethylaminoethanol produced TPCF₁₆-NMe₂ in 77% yield, while TPCF₁₆-NBu was obtained using butylamine in 87% yield. The latter was extensively methylated to form TPCF₁₆-N⁺Bu in 92% yield. The synthetic strategy was designed to compare the effect of charge density distribution on chlorin in the efficacy to induce photodynamic inactivation of pathogens. TPCF₁₆-NMe₂ has five tertiary amines that can acquire positive charges in aqueous medium by protonation. Furthermore, four of the cationic groups are located in amino groups linked to the chlorine macrocycle by an aliphatic structure of two carbon atoms, which gives it greater movement capacity. In contrast, TPCF₁₆-N⁺Bu presents intrinsic positive charges on aromatic rings. Absorption and fluorescence emission properties were not affected by the peripheral substitution on the chlorin macrocycle. Both photosensitizers (PSs) were able to form singlet molecular oxygen and superoxide anion radical in solution. Uptake and photodynamic inactivation mediated by these chlorins were examined on Staphylococcus aureus and Escherichia coli. Both phototherapeutic agents produced efficient photoinactivation of S. aureus. However, only TPCF₁₆-NMe₂ was rapidly bound to E. coli cells and this chlorin was effective to photoinactivate both strains of bacteria using lower concentrations and shorter irradiation periods. Our outcomes reveal that the charge density distribution is a key factor to consider in the development of new PSs. Accordingly, this work stands out as a promising starting point for the design of new tetrapyrrolic macrocycles with application in PDI.

Mito-Bomb: Targeting Mitochondria for Cancer Therapy

Cancer has been one of the most common life-threatening diseases for a long time. Traditional cancer therapies such as surgery, chemotherapy (CT), and radiotherapy (RT) have limited effects due to drug resistance, unsatisfactory treatment efficiency, and side effects. In recent years, photodynamic therapy (PDT), photothermal therapy (PTT), and chemodynamic therapy (CDT) have been utilized for cancer treatment owing to their high selectivity, minor resistance, and minimal toxicity. Accumulating evidence has demonstrated that selective delivery of drugs to specific subcellular organelles can significantly enhance the efficiency of cancer therapy. Mitochondria-targeting therapeutic strategies are promising for cancer therapy, which is attributed to the essential role of mitochondria in the regulation of cancer cell apoptosis, metabolism, and more vulnerable to hyperthermia and oxidative damage. Herein, the rational design, functionalization, and applications of diverse mitochondria-targeting units, involving organic phosphine/sulfur salts, quaternary ammonium (QA) salts, peptides, transition-metal complexes, guanidinium or bisguanidinium, as well as mitochondria-targeting cancer therapies including PDT, PTT, CDT, and others are summarized. This review aims to furnish researchers with deep insights and hints in the design and applications of novel mitochondria-targeting agents for cancer therapy.

The tumor phototherapeutic application of nanoparticles constructed by the relationship between PTT/PDT efficiency and 2,6- and 3,5-substituted BODIPY derivatives

BODIPY dyes have recently been used for photothermal and photodynamic therapy of tumors. However, complex multi-material systems, multiple excitation wavelengths and the unclear relationship between BODIPY structures and their PTT/PDT efficiency are still major issues. In our study, nine novel BODIPY near-infrared dyes were designed and successfully synthesized and then, the relationships between BODIPY structures and their PTT/PDT efficiency were investigated in detail. The results showed that modifications at position 3,5 of the BODIPY core with conjugated structures have better effects on photothermal and photodynamic efficiency than the modifications at position 2,6 with halogen atoms. Density functional theory (DFT) calculations showed that this is mainly due to the extension of the conjugated chain and the photoinduced electron transfer (PET) effect. By encapsulating BDPX-M with amphiphilic DSPE-PEG₂₀₀₀-RGD and lecithin, the obtained NPs not only show good water solubility and biological stability, but also could act as superior agents for photothermal and photodynamic synergistic therapy of tumors. Finally, we obtained BODIPY NPs that exhibited excellent photothermal and photodynamic effects at the same time under single irradiation with an 808 nm laser (photothermal conversion efficiency: 42.76%, A/A₀: ∼0.05). In conclusion, this work provides a direction to design and construct phototherapeutic nanoparticles based on BODIPY dyes for tumor treatment.

Pyrrole-based photosensitizers for photodynamic therapy — a Thomas Dougherty award paper

Photodynamic therapy (PDT) is a therapeutic modality that uses light to treat malignant or benign diseases. A photosensitizer, light, and oxygen are the three main components needed to generate a cytotoxic effect. Pyrrole-based photosensitizers have been widely used for PDT. Many of the photosensitizers within this class are macrocyclic. This is particularly true for systems that have received regulatory approval or been the subject of clinical trials. However, in recent years, a number of boron dipyrromethanes (BODIPY) have been studied as photosensitizers. Herein, we review examples of some of the most relevant pyrrole-based photosensitizers.

Tautomeric equilibrium, proton affinity and mass spectrometry fragmentation of flexible hydrogen-bonded precursors and rigid [Formula: see text] fluorescent dyes

The stability of two groups of conformationally locked molecules, similar in topology, but differing only by the type of the bridge rigidifying their structure, is studied. The series of the less-rigid 2-phenacylheterocyclic compounds and their stiff difluoroboranyl derivatives are investigated for the determination of the effect of [Formula: see text]/S/O replacement in a five-membered heterocyclic ring and the presence of a strong electron-donating group on the tautomeric equilibrium, protonation affinity, and fragmentation pattern observed in the structural elucidation by means of mass spectrometry technique. The results of the [Formula: see text]B97X-D/6-311++G(d,p) calculations, the topological analysis of electron density as well as the experimental MS measurements show the importance of the number of heteroatoms, their properties, and location in the molecule for the rational design of the systems of desired stable tautomers or the favorable protonation sites. The obtained data allow for the understanding of the fundamentals of the novel highly fluorescent difluoroborates fragmentation behavior, vital for their structural elucidation with the application of high-resolution tandem mass spectrometry methods.

Eu(III)-DO3A and BODIPY dyad as a chemosensor for anthrax biomarker

The sensitive and selective determination of Bacillus anthracis spores before the infection is vital for human health and safety. Dipicolinic acid (DPA) is an excellent biomarker due to its presence in the nucleus of bacterial spores at high concentrations (up to 1 M, about 15% dry weight). In the present work, a new molecular chemosensor 1, based on europium(III)-DO3A and BODIPY dyad, is developed to detect DPA in phosphate-buffered saline (PBS) buffered solution and tap water samples. Also, 1 can be used as a ratiometric optical chemosensor to track DPA.

Amphiphilic tricationic Zn(II)phthalocyanine provides effective photodynamic action to eradicate broad-spectrum microorganisms

A novel tricationic Zn(II)phthalocyanine derivative, (NCH₃)₃ZnPc³⁺, was synthesized by ring expansion reaction of boron(III) [2,9(10),16(17)-trinitrosubphthalocyaninato]chloride. First, the reaction of this subphthalocyanine with 2,3-naphthalenedicarbonitrile and Zn(CH₃COO)₂ catalyzed by 8-diazabicyclo[5.4.0]undec-7-ene was used to obtain the A₃B-type nitrophthalocyanine. After reduction of nitro groups with Na₂S and exhaustive methylation of amino groups, (NCH₃)₃ZnPc³⁺ was formed in good yields. In addition, the tetracationic analog (NCH₃)₄ZnPc⁴⁺ was synthesized to compare their properties. The absorption and fluorescence spectra showed the Q-bands and the red emission, respectively, which are characteristic of the Zn(II)phthalocyanine derivatives in N,N-dimethylformamide. Furthermore, photodynamic activity sensitized by these compounds was studied in the presence of different molecular probes to sense the formation of reactive oxygen species. (NCH₃)₃ZnPc³⁺ efficiently produced singlet molecular oxygen and also it sensitized the formation of superoxide anion radical in the presence of NADH, while the photodynamic activity of (NCH₃)₄ZnPc⁴⁺ was very poor, possibly due to the partial formation of aggregates. Furthermore, the decomposition of L-tryptophan induced by (NCH₃)₃ZnPc³⁺ was mainly mediated by a type II mechanism. Antimicrobial photodynamic inactivation sensitized by these phthalocyanines was evaluated in Staphylococcus aureus, Escherichia coli, and Candida albicans, as representative microbial cells. In cell suspensions, (NCH₃)₃ZnPc³⁺ was rapidly bound to microbial cells, showing bioimages with red fluorescence emission. After 5 min of irradiation with visible light, (NCH₃)₃ZnPc³⁺ was able to completely eliminate S. aureus, E. coli and C. albicans, using 1.0, 2.5 and 5.0 μM phthalocyanine, respectively. In contrast, a low photoinactivation activity was found with (NCH₃)₄ZnPc⁴⁺ as a photosensitizer. Therefore, the amphiphilic tricationic phthalocyanine (NCH₃)₃ZnPc³⁺ is a promising photosensitizing structure for application as a broad-spectrum antimicrobial phototherapeutic agent.

Tuning Photodynamic Properties of BODIPY Dyes, Porphyrins' Little Sisters

The photodynamic properties of a series of non-halogenated, dibrominated and diiodinated BODIPYs with a phthalimido or amino end modification on the phenoxypentyl and phenoxyoctyl linker in the meso position were investigated. Halogen substitution substantially increased the singlet oxygen production based on the heavy atom effect. This increase was accompanied by a higher photodynamic activity against skin melanoma cancer cells SK-MEL-28, with the best compound reaching an EC50 = 0.052 ± 0.01 µM upon light activation. The dark toxicity (toxicity without light activation) of all studied dyes was not detected up to the solubility limit in cell culture medium (10 µM). All studied BODIPY derivatives were predominantly found in adiposomes (lipid droplets) with further lower signals colocalized in either endolysosomal vesicles or the endoplasmic reticulum. A detailed investigation of cell death indicated that the compounds act primarily through the induction of apoptosis. In conclusion, halogenation in the 2,6 position of BODIPY dyes is crucial for the efficient photodynamic activity of these photosensitizers.

BOSHPY Fluorophores: BODIPY Analogues with Single Atom Controlled Aggregation

The reaction of diiminoisoindoline and iminoxoisoindoline with aminoazoles results in the formation of bidentate chelates that can be considered a semihemiporphyrazine. These chelates react with BF₃ to produce fluorescent compounds that are structurally analogous to the BODIPY dyes. These difluoroboron semihemiporphyrazines (BOSHPYs) aggregate, and the type of aggregation (H or J) is determined by a single atom at the periphery of the ligand (O or N). Notably, the imine terminated compounds remain fluorescent upon aggregation.

Photosensitizing Antivirals

Antiviral action of various photosensitizers is already summarized in several comprehensive reviews, and various mechanisms have been proposed for it. However, a critical consideration of the matter of the area is complicated, since the exact mechanisms are very difficult to explore and clarify, and most publications are of an empirical and "phenomenological" nature, reporting a dependence of the antiviral action on illumination, or a correlation of activity with the photophysical properties of the substances. Of particular interest is substance-assisted photogeneration of highly reactive singlet oxygen (1O2). The damaging action of 1O2 on the lipids of the viral envelope can probably lead to a loss of the ability of the lipid bilayer of enveloped viruses to fuse with the lipid membrane of the host cell. Thus, lipid bilayer-affine 1O2 photosensitizers have prospects as broad-spectrum antivirals against enveloped viruses. In this short review, we want to point out the main types of antiviral photosensitizers with potential affinity to the lipid bilayer and summarize the data on new compounds over the past three years. Further understanding of the data in the field will spur a targeted search for substances with antiviral activity against enveloped viruses among photosensitizers able to bind to the lipid membranes.

Photochemical Properties and Stability of BODIPY Dyes

The present study is devoted to the combined experimental and theoretical description of the photophysical properties and photodegradation of the new boron-dipyrromethene (BODIPY) derivatives obtained recently for biomedical applications, such as bacteria photoinactivation (Piskorz et al., Dyes and Pigments 2020, 178, 108322). Absorption and emission spectra for a wide group of solvents of different properties for the analyzed BODIPY derivatives were investigated in order to verify their suitability for photopharmacological applications. Additionally, the photostability of the analyzed systems were thoroughly determined. The exposition to the UV light was found first to cause the decrease in the most intensive absorption band and the appearance of the hypsochromically shifted band of similar intensity. On the basis of the chromatographic and computational study, this effect was assigned to the detachment of the iodine atoms from the BODIPY core. After longer exposition to UV light, photodegradation occurred, leading to the disappearance of the intensive absorption bands and the emergence of small intensity signals in the strongly blue-shifted range of the spectrum. Since the most intensive bands in original dyes are ascribed to the molecular core bearing the BF₂ moiety, this result can be attributed to the significant cleavage of the BF₂ ring. In order to fully characterize the obtained molecules, the comprehensive computational chemistry study was performed. The influence of the intermolecular interactions for their absorption in solution was analyzed. The theoretical data entirely support the experimental outcomes.

Tuning the Polarity of Fullerene C60 Derivatives for Enhanced Photodynamic Inactivation†

In this article, four novel fulleropyrrolidines derivatives were synthesized to study how the effect of polarity and positive charge distribution can influence the efficacy of photodynamic inactivation treatments to kill bacteria. The design of the photosensitizers was based on DFT calculations that allowed us to estimate the dipolar moment of the molecules. Neutral compounds bearing N-methyl bis-acetoxy-ethyl (1) and bis-hydroxyethyl (2) amine were the starting material to obtain the dicationic analogs N,N-dimethyl bis-methoxyethyl (3), and bis-acetoxy-ethyl) (4) methylammonio. As expected from fullerene C₆₀ derivatives, compounds 1-4 absorb in the UV region, with a peak at 430 nm, a broader range of absorption up to 710 nm, and exhibit weak fluorescence emission in toluene and reverse micelles. In the biomimetic AOT micellar system, the highest singlet oxygen photosensitization was found for compounds 1, followed by 3, 2, and 4. Whereas 4 was the most effective reducing nitro blue tetrazolium in the presence of β-NADH. The influence of type I and type II mechanism on the photodynamic activity of compounds 3 and 4 was further examined in the presence of L-tryptophan and two reactive oxygen species scavengers. In vitro experiments indicated that the compounds with the highest dipolar moments, 3 (37.19 D) and 4 (38.46 D), inactivated methicillin-resistant Staphylococcus aureus and Escherichia coli bacteria using an energy dose <2.4 J cm^-2 . No inactivation was observed for the neutral analogs with the lowest dipolar moments. These findings help to optimize sensitizer structures to improve photodynamic inactivation.

Impact of iodine loading and substitution position on intersystem crossing efficiency in a series of ten methylated-meso-phenyl-BODIPY dyes

Four core and six distyryl-extended methylated-meso-phenyl-BODIPY dyes with varying iodine content were synthesized. The influence of iodine loading and substitution position on the photophysical properties of these chromophores was evaluated. Selective iodine insertion at the 2- and 6-positions of the methylated-meso-phenyl-BODIPY core, rather than maximum iodine content, resulted in the highest intersystem crossing efficiency. Iodination of the distyryl-extended BODIPY core afforded intersystem crossing quantum yields comparable to 2,6-diiodo-BODIPY. Inclusion of an iodine at the para-meso-phenyl position generally enhanced non-radiative decay in the BODIPY excited-state, leading to lower fluorescence and intersystem crossing quantum yield values. Iodine substitution at the styryl-positions resulted in negligible changes to the excited-state dynamics. This study highlights: (1) the rate of radiative decay is similar in all ten derivatives (on the order of 1 × 108 s-1), (2) iodination of the 2,6-positions results in the greatest enhancement of intersystem crossing efficiency, (3) care must be taken when modifying the para-meso-phenyl position as it could have detrimental effects on the excited-state dynamics, (4) the excited-state is negligibly affected by iodination of the styryl groups, potentially enabling orthogonal functionalization without modifying the molecular photophysics, (5) distyryl extension of the chromophore core diminishes rates of non-radiative decay and intersystem crossing, resulting in higher fluorescence quantum yields and lower intersystem crossing yields in the π-extended derivatives compared to the core BDP derivatives, and (6) DFT calculations provide insight into the electronic and structural factors regulating intersystem crossing and vibrational relaxation in these molecules.

Conjugation-regulating synthesis of high photosensitizing activity porphyrin-based covalent organic frameworks for photodynamic inactivation of bacteria

Preparation of porphyrin-based covalent organic frameworks (Por-COFs) with high photosensitizing activity for photodynamic inactivation of bacteria is of great challenge, but significant for economy and human health. Herein, we show a conjugation-regulating strategy to design and synthesize Por-COFs with high photosensitizing activity for the photodynamic inactivation of bacteria. Terephthalaldehyde (Da), 2,5-Dihydroxyterephthalaldehyde (Dha), and 2,5-Diethoxyterephthalaldehyde (Deta) with different conjugation degrees are selected to condense with 5,10,15,20-Tetrakis(4-aminophenyl)porphyrin (Tph) to synthesize COF-366, DhaTph, and JNU-2, respectively. The higher conjugation of Dha and Deta than Da leads to the higher conjugation of DhaTph and JNU-2, respectively. Moreover, the hydroxyl group in Dha and the ethoxy group in Deta further expand the conjugation of DhaTph and JNU-2 via the formation of intralayer extended π-cloud delocalization and p-π conjunction, respectively. The extension of conjugation for DhaTph and JNU-2 results in the increase of intersystem crossing process and significantly improves their photosensitizing activity. Furthermore, JNU-2 with the highest photosensitizing activity exhibits superior antibacterial effects toward Staphylococcus aureus (99.1%) and Escherichia coli (96.8%). This study offers a new conjugation-regulating strategy for designing high photosensitizing activity of Por-COFs for the inactivation of bacteria.

Facile mitochondria localized fluorescent probe for viscosity detection in living cells

Fluorescent probes act as a powerful tool to understand the function of intracellular viscosity, which are closely associated with many functional disorders and diseases. Herein we report a boron-dipyrromethene (4,4-difluoro-4-borata-3a,4a-diaza-s-indacene, BODIPY) group based new fluorescent probe (BV-1), which was synthesized facilely by a one-step Knoevenagel-type condensation reaction, to detect viscosity in living cells with high selectivity and sensitivity. DFT calculation demonstrated that the unsaturated moiety at the meso-position of BODIPY suppressed the fluorescence via twisted intramolecular charge transfer (TICT) mechanism in low viscosity media. By restricting the rotation of the molecular rotor, the fluorescence would be enhanced significantly with redshift in emission wavelength in high viscosity conditions. The fluorescence intensity ratio (log (I/I₀)) at 570 nm showed a good linearity (R² = 0.991) with the viscosity (log η) in the range of 2-868 cP. And the limit of detection (LOD) and limit of quantification (LOQ) for viscosity were calculated to be 0.16 cP and 0.54 cP, respectively. BV-1 was demonstrated to be mitochondria localized with low cytotoxicity. Utilizing the new probe BV-1, the changes in mitochondrial viscosity caused by monensin or nystatin have been monitored successfully in real time. This work will provide new efficient ways for the development of viscosity probes, which are expected to be used for the study of intracellular viscosity properties and functions.