Human cornea construct HCC-an alternative for in vitro permeation studies? A comparison with human donor corneas

An in vitro 3-dimensional Collagen-based Corneal Construct with Innervation Using Human Corneal Cell Lines

Purpose

To develop a 3-dimensional corneal construct suitable for in vitro studies of disease conditions and therapies.

Design

In vitro human corneal constructs were created using chemically crosslinked collagen and chondroitin sulfate extracellular matrix and seeded with 3 human corneal cell types (epithelial, stromal, and endothelial) together with neural cells. The neural cells were derived from hybrid neuroblastoma cells and the other cells used from immortalized human corneal cell lines. To check the feasibility and characterize the constructs, cytotoxicity, cell proliferation, histology, and protein expression studies were performed.

Results

Optimized culture condition permitted synchronized viability across the cell types within the construct. The construct showed a typical appearance for different cellular layers, including healthy appearing, phenotypically differentiated neurons. The expected protein expression profiles for specific cell types within the construct were confirmed with western blotting.

Conclusions

An in vitro corneal construct was successfully developed with maintenance of individual cell phenotypes with anatomically correct cellular loci. The construct may be useful in evaluation of specific corneal disorders and in developing different corneal disease models. Additionally, the construct can be used in evaluating drug targeting and/or penetration to individual corneal layers, testing novel therapeutics for corneal diseases, and potentially reducing the necessity for animals in corneal research at the early stages of investigation.

Financial Disclosures

Proprietary or commercial disclosure may be found in the Footnotes and Disclosures at the end of this article.

Cannabidiol nanoemulsion for eye treatment - Anti-inflammatory, wound healing activity and its bioavailability using in vitro human corneal substitute

Cannabidiol (CBD) is the non-psychoactive component of the plant Cannabis sativa (L.) that has great anti-inflammatory benefits and wound healing effects. However, its high lipophilicity, chemical instability, and extensive metabolism impair its bioavailability and clinical use. Here, we report on the preparation of a human cornea substitute in vitro and validate this substitute for the evaluation of drug penetration. CBD nanoemulsion was developed and evaluated for stability and biological activity. The physicochemical properties of CBD nanoemulsion were maintained during storage for 90 days under room conditions. In the scratch assay, nanoformulation showed significantly ameliorated wound closure rates compared to the control and pure CBD. Due to the lower cytotoxicity of nanoformulated CBD, a higher anti-inflammatory activity was demonstrated. Neither nanoemulsion nor pure CBD can penetrate the cornea after the four-hour apical treatment. For nanoemulsion, 94 % of the initial amount of CBD remained in the apical compartment while only 54 % of the original amount of pure CBD was detected in the apical medium, and 7 % in the cornea, the rest was most likely metabolized. In summary, the nanoemulsion developed in this study enhanced the stability and biological activity of CBD.

In vitro reconstructed 3D corneal tissue models for ocular toxicology and ophthalmic drug development

Testing of all manufactured products and their ingredients for eye irritation is a regulatory requirement. In the last two decades, the development of alternatives to the in vivo Draize eye irritation test method has substantially advanced due to the improvements in primary cell isolation, cell culture techniques, and media, which have led to improved in vitro corneal tissue models and test methods. Most in vitro models for ocular toxicology attempt to reproduce the corneal epithelial tissue which consists of 4-5 layers of non-keratinized corneal epithelial cells that form tight junctions, thereby limiting the penetration of chemicals, xenobiotics, and pharmaceuticals. Also, significant efforts have been directed toward the development of more complex three-dimensional (3D) equivalents to study wound healing, drug permeation, and bioavailability. This review focuses on in vitro reconstructed 3D corneal tissue models and their utilization in ocular toxicology as well as their application to pharmacology and ophthalmic research. Current human 3D corneal epithelial cell culture models have replaced in vivo animal eye irritation tests for many applications, and substantial validation efforts are in progress to verify and approve alternative eye irritation tests for widespread use. The validation of drug absorption models and further development of models and test methods for many ophthalmic and ocular disease applications is required.

The Human Tissue-Engineered Cornea (hTEC): Recent Progress

Each day, about 2000 U.S. workers have a job-related eye injury requiring medical treatment. Corneal diseases are the fifth cause of blindness worldwide. Most of these diseases can be cured using one form or another of corneal transplantation, which is the most successful transplantation in humans. In 2012, it was estimated that 12.7 million people were waiting for a corneal transplantation worldwide. Unfortunately, only 1 in 70 patients received a corneal graft that same year. In order to provide alternatives to the shortage of graftable corneas, considerable progress has been achieved in the development of living corneal substitutes produced by tissue engineering and designed to mimic their in vivo counterpart in terms of cell phenotype and tissue architecture. Most of these substitutes use synthetic biomaterials combined with immortalized cells, which makes them dissimilar from the native cornea. However, studies have emerged that describe the production of tridimensional (3D) tissue-engineered corneas using untransformed human corneal epithelial cells grown on a totally natural stroma synthesized by living corneal fibroblasts, that also show appropriate histology and expression of both extracellular matrix (ECM) components and integrins. This review highlights contributions from laboratories working on the production of human tissue-engineered corneas (hTECs) as future substitutes for grafting purposes. It overviews alternative models to the grafting of cadaveric corneas where cell organization is provided by the substrate, and then focuses on their 3D counterparts that are closer to the native human corneal architecture because of their tissue development and cell arrangement properties. These completely biological hTECs are therefore very promising as models that may help understand many aspects of the molecular and cellular mechanistic response of the cornea toward different types of diseases or wounds, as well as assist in the development of novel drugs that might be promising for therapeutic purposes.

Three-Dimensional Human Cell Culture Models to Study the Pathophysiology of the Anterior Eye

In recent decades, the establishment of complex three-dimensional (3D) models of tissues has allowed researchers to perform high-quality studies and to not only advance knowledge of the physiology of these tissues but also mimic pathological conditions to test novel therapeutic strategies. The main advantage of 3D models is that they recapitulate the spatial architecture of tissues and thereby provide more physiologically relevant information. The eye is an extremely complex organ that comprises a large variety of highly heterogeneous tissues that are divided into two asymmetrical portions: the anterior and posterior segments. The anterior segment consists of the cornea, conjunctiva, iris, ciliary body, sclera, aqueous humor, and the lens. Different diseases in these tissues can have devastating effects. To study these pathologies and develop new treatments, the use of cell culture models is instrumental, and the better the model, the more relevant the results. Thus, the development of sophisticated 3D models of ocular tissues is a significant challenge with enormous potential. In this review, we present a comprehensive overview of the latest advances in the development of 3D in vitro models of the anterior segment of the eye, with a special focus on those that use human primary cells.

A proposed eye ex vivo permeation approach to evaluate pesticides: Case dimethoate

This study aims to propose different ex vivo methodologies for pesticide evaluation when in contact with ocular mucosa. The first ex vivo study was performed using vertical Franz cells with fresh and refrigerated excised bovine corneas. The second evaluated the permeation through the cornea by using fresh, refrigerated and damaged whole bovine eyes. Both experiments were evaluated by applying 50 μl (of 5 mg/ml solution) of an emulsifiable pesticide formulation (Dimetoato 500 EC®). In the first study, dimethoate profiles and permeation fluxes showed no statistical differences (p < .05) between fresh and refrigerated excised corneas, probably due to the excision procedure generating damage to the cornea by altering stromal structure, irrespective of the refrigeration procedure. In relation to the results obtained for developed ex vivo permeation method in whole eyes, there was a statistical difference (p < .05) between experiments performed with fresh eyes and those performed with refrigerated/damaged eyes. Damage generated by both the refrigeration process and exposure to irritant products led to a five-fold reduction in the amount of corneal-permeated pesticide as well as a two-fold increase in retention. Thus, the ex vivo permeation approach with whole eyes seems to be a simple and reproducible method to evaluate pesticides. It is evident that further evaluations need to be performed using other pesticides with distinct physicochemical characteristics.

Development of In Vitro Methodologies to Investigate Binding by Sodium Hyaluronate in Eye Drops to Corneal Surfaces

PURPOSE

To develop in vitro methods to assess binding by sodium hyaluronate in eye drops to corneal surfaces.

METHODS

Two different, complementary corneal binding set-ups were developed. In a dynamic in vitro model, confluent corneal epithelial cells (HCE-T) were assembled in chamber slides and a declining channel. A static model was constructed with ex vivo porcine corneas clamped in Franz cells. To test the predictive capacity of models, four different eye drops containing sodium hyaluronate were spiked with tritium-labeled sodium hyaluronate to standardize quantification. In both settings, eye drops were applied for 5 min and physiological conditions were mimicked by flushing with artificial tear fluid. Spreading experiments on HCE-T next to synthetic membranes were used for further characterization.

RESULTS

Binding was more pronounced in dynamic HCE-T model. Three of the four eye drops demonstrated sigmoidal elution of sodium hyaluronate, suggesting pronounced binding. One solution eluted distinctly faster, likewise the buffer control. The static method produced a similar ranking but at lower levels. When eye drops in which phosphate buffer was replaced by citrate buffer (i.e., to prevent calcification) were used, binding was not influenced. All eye drops spread immediately when placed on HCE-T and at the same order of magnitude on glass and polyethylene terephthalate surfaces.

CONCLUSION

Dynamic and static models performed on different corneal sources were used to determine sodium hyaluronate binding kinetics in solutions under physiological conditions. These methodologies resulted in a ranking of the capacity of sodium hyaluronate to bind in vitro to corneal surfaces.

Improved in vitro models for preclinical drug and formulation screening focusing on 2D and 3D skin and cornea constructs

The present overview deals with current approaches for the improvement of in vitro models for preclinical drug and formulation screening which were elaborated in a joint project at the Center of Pharmaceutical Engineering of the TU Braunschweig. Within this project a special focus was laid on the enhancement of skin and cornea models. For this reason, first, a computation-based approach for in silico modeling of dermal cell proliferation and differentiation was developed. The simulation should for example enhance the understanding of the performed 2D in vitro tests on the antiproliferative effect of hyperforin. A second approach aimed at establishing in vivo-like dynamic conditions in in vitro drug absorption studies in contrast to the commonly used static conditions. The reported Dynamic Micro Tissue Engineering System (DynaMiTES) combines the advantages of in vitro cell culture models and microfluidic systems for the emulation of dynamic drug absorption at different physiological barriers and, later, for the investigation of dynamic culture conditions. Finally, cryopreserved shipping was investigated for a human hemicornea construct. As the implementation of a tissue-engineering laboratory is time-consuming and cost-intensive, commercial availability of advanced 3D human tissue is preferred from a variety of companies. However, for shipping purposes cryopreservation is a challenge to maintain the same quality and performance of the tissue in the laboratory of both, the provider and the customer.

Human corneal cell culture models for drug toxicity studies

In vivo toxicity and absorption studies of topical ocular drugs are problematic, because these studies involve invasive tissue sampling and toxic effects in animal models. Therefore, different human corneal models ranging from simple monolayer cultures to three-dimensional models have been developed for toxicological prediction with in vitro models. Each system has its own set of advantages and disadvantages. Use of non-corneal cells, inadequate characterization of gene-expression profiles, and accumulation of genomic aberrations in human corneal models are typical drawbacks that decrease their reliability and predictive power. In the future, further improvements are needed for verifying comparable expression profiles and cellular properties of human corneal models with their in vivo counterparts. A rapidly expanding stem cell technology combined with tissue engineering may give future opportunities to develop new tools in drug toxicity studies. One approach may be the production of artificial miniature corneas. In addition, there is also a need to use large-scale profiling approaches such as genomics, transcriptomics, proteomics, and metabolomics for understanding of the ocular toxicity.

* Ethical Issues in the Use of Animal Models for Tissue Engineering: Reflections on Legal Aspects, Moral Theory, Three Rs Strategies, and Harm-Benefit Analysis

Animal experimentation requires a solid and rational moral foundation. Objective and emphatic decision-making and protocol evaluation by researchers and ethics committees remain a difficult and sensitive matter. This article presents three perspectives that facilitate a consideration of the minimally acceptable standard for animal experiments, in particular, in tissue engineering (TE) and regenerative medicine. First, we review the boundaries provided by law and public opinion in America and Europe. Second, we review contemporary moral theory to introduce the Neo-Rawlsian contractarian theory to objectively evaluate the ethics of animal experiments. Third, we introduce the importance of available reduction, replacement, and refinement strategies, which should be accounted for in moral decision-making and protocol evaluation of animal experiments. The three perspectives are integrated into an algorithmic and graphic harm-benefit analysis tool based on the most relevant aspects of animal models in TE. We conclude with a consideration of future avenues to improve animal experiments.

Topical ocular delivery to laser-induced choroidal neovascularization by dual internalizing RGD and TAT peptide-modified nanoparticles

A nanoparticle (NP) was developed to target choroidal neovascularization (CNV) via topical ocular administration. The NPs were prepared through conjugation of internalizing arginine-glycine-aspartic acid RGD (iRGD; Ac-CCRGDKGPDC) and transactivated transcription (TAT) (RKKRRQRRRC) peptide to polymerized ethylene glycol and lactic-co-glycolic acid. The iRGD sequence can specifically bind with integrin α_vβ₃, while TAT facilitates penetration through the ocular barrier. ¹H nuclear magnetic resonance and high-performance liquid chromatography demonstrated that up to 80% of iRGD and TAT were conjugated to poly(ethylene glycol)– poly(lactic-co-glycolic acid). The resulting particle size was 67.0±1.7 nm, and the zeta potential of the particles was −6.63±0.43 mV. The corneal permeation of iRGD and TAT NPs increased by 5.50- and 4.56-fold compared to that of bare and iRGD-modified NPs, respectively. Cellular uptake showed that the red fluorescence intensity of iRGD and TAT NPs was highest among primary NPs and iRGD- or TAT-modified NPs. CNV was fully formed 14 days after photocoagulation in Brown Norway (BN) rats as shown by optical coherence tomography and fundus fluorescein angiography analyses. Choroidal flat mounts in BN rats showed that the red fluorescence intensity of NPs followed the order of iRGD and TAT NPs > TAT-modified NPs > iRGD-modified NPs > primary NPs. iRGD and TAT dual-modified NPs thus displayed significant targeting and penetration ability both in vitro and in vivo, indicating that it is a promising drug delivery system for managing CNV via topical ocular administration.

Keratoconus: tissue engineering and biomaterials

Keratoconus (KC) is a bilateral, asymmetric, corneal disorder that is characterized by progressive thinning, steepening, and potential scarring. The prevalence of KC is stated to be 1 in 2000 persons worldwide; however, numbers vary depending on size of the study and regions. KC appears more often in South Asian, Eastern Mediterranean, and North African populations. The cause remains unknown, although a variety of factors have been considered. Genetics, cellular, and mechanical changes have all been reported; however, most of these studies have proven inconclusive. Clearly, the major problem here, like with any other ocular disease, is quality of life and the threat of vision loss. While most KC cases progress until the third or fourth decade, it varies between individuals. Patients may experience periods of several months with significant changes followed by months or years of no change, followed by another period of rapid changes. Despite the major advancements, it is still uncertain how to treat KC at early stages and prevent vision impairment. There are currently limited tissue engineering techniques and/or "smart" biomaterials that can help arrest the progression of KC. This review will focus on current treatments and how biomaterials may hold promise for the future.

Development of a curved, stratified, in vitro model to assess ocular biocompatibility

PURPOSE

To further improve in vitro models of the cornea, this study focused on the creation of a three-dimensional, stratified, curved epithelium; and the subsequent characterization and evaluation of its suitability as a model for biocompatibility testing.

METHODS

Immortalized human corneal epithelial cells were grown to confluency on curved cellulose filters for seven days, and were then differentiated and stratified using an air-liquid interface for seven days before testing. Varying concentrations of a commercial ophthalmic solution containing benzalkonium chloride (BAK), a known cytotoxic agent, and two relevant ocular surfactants were tested on the model. A whole balafilcon A lens soaked in phosphate buffered saline (BA PBS) was also used to assess biocompatibility and verify the validity of the model. Viability assays as well as flow cytometry were performed on the cells to investigate changes in cell death and integrin expression.

RESULTS

The reconstructed curved corneal epithelium was composed of 3-5 layers of cells. Increasing concentrations of BAK showed dose-dependent decreased cell viability and increased integrin expression and cell death. No significant change in viability was observed in the presence of the surfactants. As expected, the BA PBS combination appeared to be very biocompatible with no adverse change in cell viability or integrin expression.

CONCLUSIONS

The stratified, curved, epithelial model proved to be sensitive to distinct changes in cytotoxicity and is suitable for continued assessment for biocompatibility testing of contact lenses. Our results showed that flow cytometry can provide a quantitative measure of the cell response to biomaterials or cytotoxic compounds for both the supernatant and adherent cell populations. As a specifically designed in vitro model of the corneal epithelium, this quantitative model for biocompatibility at the ocular surface may help improve our understanding of cell-material interactions and reduce the use of animal testing.

Tissue engineering of the corneal endothelium: a review of carrier materials

Functional impairment of the human corneal endothelium can lead to corneal blindness. In order to meet the high demand for transplants with an appropriate human corneal endothelial cell density as a prerequisite for corneal function, several tissue engineering techniques have been developed to generate transplantable endothelial cell sheets. These approaches range from the use of natural membranes, biological polymers and biosynthetic material compositions, to completely synthetic materials as matrices for corneal endothelial cell sheet generation. This review gives an overview about currently used materials for the generation of transplantable corneal endothelial cell sheets with a special focus on thermo-responsive polymer coatings.

Keeping an eye on decellularized corneas: a review of methods, characterization and applications

The worldwide limited availability of suitable corneal donor tissue has led to the development of alternatives, including keratoprostheses (Kpros) and tissue engineered (TE) constructs. Despite advances in bioscaffold design, there is yet to be a corneal equivalent that effectively mimics both the native tissue ultrastructure and biomechanical properties. Human decellularized corneas (DCs) could offer a safe, sustainable source of corneal tissue, increasing the donor pool and potentially reducing the risk of immune rejection after corneal graft surgery. Appropriate, human-specific, decellularization techniques and high-resolution, non-destructive analysis systems are required to ensure reproducible outputs can be achieved. If robust treatment and characterization processes can be developed, DCs could offer a supplement to the donor corneal pool, alongside superior cell culture systems for pharmacology, toxicology and drug discovery studies.

Thinking inside the box: keeping tissue-engineered constructs in vitro for use as preclinical models

Tissue engineers have made great strides toward the creation of living tissue replacements for a wide range of tissue types and applications, with eventual patient implantation as the primary goal. However, an alternate use of tissue-engineered constructs exists: as in vitro preclinical models for purposes such as drug screening and device testing. Tissue-engineered preclinical models have numerous potential advantages over existing models, including cultivation in three-dimensional geometries, decreased cost, increased reproducibility, precise control over cultivation conditions, and the incorporation of human cells. Over the past decade, a number of researchers have developed and used tissue-engineered constructs as preclinical models for testing pharmaceuticals, gene therapies, stents, and other technologies, with examples including blood vessels, skeletal muscle, bone, cartilage, skin, cardiac muscle, liver, cornea, reproductive tissues, adipose, small intestine, neural tissue, and kidney. The focus of this article is to review accomplishments toward the creation and use of tissue-engineered preclinical models of each of these different tissue types.

Development of a serum-free human cornea construct for in vitro drug absorption studies: the influence of varying cultivation parameters on barrier characteristics

The increased use of ophthalmic products in recent years has led to an increased demand for in vitro and in vivo transcorneal drug absorption studies. Cell-culture models of the human cornea can avoid several of the disadvantages of widely used animal experimental models, including ethical concerns and poor standardisation. This study describes the development of a serum-free cultivated, three-dimensional human cornea model (Hemicornea, HC) for drug absorption experiments. The impact of varying cultivation conditions on the corneal barrier function was analysed and compared with excised rabbit and porcine corneas. The HC was cultivated on permeable polycarbonate filters using immortalised human keratocytes and a corneal epithelial cell line. The equivalence to native tissue was investigated through absorption studies using model substances with a wide range of molecular characteristics, including hydrophilic sodium fluorescein, lipophilic rhodamine B and fluorescein isothiocyanate (FITC)-labelled macromolecule dextran. To study the intra-laboratory repeatability and construct cultivation, the permeation studies were performed independently by different researchers. The HC exhibited a permeation barrier in the same range as excised animal corneas, high reproducibility and a lower standard deviation. Therefore, the HC could be a promising in vitro alternative to ex vivo corneal tissues in preclinical permeation studies.

In vitro cell culture models to study the corneal drug absorption

INTRODUCTION

Many diseases of the anterior eye segment are treated using topically applied ophthalmic drugs. For these drugs, the cornea is the main barrier to reaching the interior of the eye. In vitro studies regarding transcorneal drug absorption are commonly performed using excised corneas from experimental animals. Due to several disadvantages and limitations of these animal experiments, establishing corneal cell culture models has been attempted as an alternative.

AREAS COVERED

This review summarizes the development of in vitro models based on corneal cell cultures for permeation studies during the last 20 years, starting with simple epithelial models and moving toward complex organotypical 3D corneal equivalents.

EXPERT OPINION

Current human 3D corneal cell culture models have the potential to replace excised animal corneas in drug absorption studies. However, for widespread use, the contemporary validation of existent systems is required.

Examining the suitability of riboflavin/UVA treatment for strengthening the stromal bioequivalent of a human cornea construct

PURPOSE

To improve the mechanical stability of a tissue-engineered human cornea construct, which is used as an in vitro model for drug absorption studies, the collagen matrix of this construct is to be strengthened by collagen cross-linking. A suitable method to induce photooxidative cross-linking of collagen fibrils is UVA irradiation combined with riboflavin as a photosensitizer.

MATERIALS AND METHODS

After riboflavin/UVA treatment, the viscoelastic properties of the collagen matrix and the molecular weight of its proteins, as well as cell viability of the human corneal keratocytes (HCK) incorporated in the stromal matrix, were analyzed depending on the dose of irradiation. In addition, the cell damage to the HCKs after riboflavin/UVA treatment was also analyzed in monolayer cultures. Various luminescent cell assays were performed to clarify whether the decrease of cell viability was a consequence of apoptosis or necrosis. Furthermore, fluorescent double staining was carried out using an apoptotic/necrotic cells detection kit.

RESULTS

The improvement of mechanical properties was low, whereas resultant cell damage was considerable and enduring. When lower doses of irradiation were used, the reduction of cell viability was triggered by apoptosis while necrosis supervened for increased doses of irradiation.

CONCLUSION

We conclude that in contrast to clinical applications, the riboflavin/UVA treatment does not seem to be a suitable method to obtain a sufficiently firm stromal matrix including vital keratocytes to build a tissue-engineered human cornea construct to be used as an in vitro model for drug absorption studies.

Solid lipid nanoparticles for ocular drug delivery

Ocular drug delivery remains challenging because of the complex nature and structure of the eye. Conventional systems, such as eye drops and ointments, are inefficient, whereas systemic administration requires high doses resulting in significant toxicity. There is a need to develop novel drug delivery carriers capable of increasing ocular bioavailability and decreasing both local and systemic cytotoxicity. Nanotechnology is expected to revolutionize ocular drug delivery. Many nano-structured systems have been employed for ocular drug delivery and yielded some promising results. Solid lipid nanoparticles (SLNs) have been looked at as a potential drug carrier system since the 1990s. SLNs do not show biotoxicity as they are prepared from physiological lipids. SLNs are especially useful in ocular drug delivery as they can enhance the corneal absorption of drugs and improve the ocular bioavailability of both hydrophilic and lipophilic drugs. SLNs have another advantage of allowing autoclave sterilization, a necessary step towards formulation of ocular preparations. This review outlines in detail the various production, characterization, sterilization, and stabilization techniques for SLNs. In-vitro and in-vivo methods to study the drug release profile of SLNs have been explained. Special attention has been given to the nature of lipids and surfactants commonly used for SLN production. A summary of previous studies involving the use of SLNs in ocular drug delivery is provided, along with a critical evaluation of SLNs as a potential ocular delivery system.

A review of three-dimensional in vitro tissue models for drug discovery and transport studies

The use of animal models in drug discovery studies presents issues with feasibility and ethical concerns. To address these limitations, in vitro tissue models have been developed to provide a means for systematic, repetitive, and quantitative investigation of drugs. By eliminating or reducing the need for animal subjects, these models can serve as platforms for more tightly controlled, high-throughput screening of drugs and for pharmacokinetic and pharmacodynamic analyses of drugs. The focus of this review is three-dimensional (3D) tissue models that can capture cell-cell and cell-matrix interactions. Compared to the 2D culture of cell monolayers, 3D models more closely mimic native tissues since the cellular microenvironment established in the 3D models often plays a significant role in disease progression and cellular responses to drugs. A growing body of research has been published in the literature, which highlights the benefits of the 3D in vitro models of various tissues. This review provides an overview of some successful 3D in vitro models that have been developed to mimic liver, breast, cardiac, muscle, bone, and corneal tissues as well as malignant tissues in solid tumors.

Evaluation of active and passive transport processes in corneas extracted from preserved rabbit eyes

In vitro transcorneal permeability studies are an important screening tool in drug development. The objective of this research is to examine the feasibility of using corneas isolated from preserved rabbit eyes as a model for permeability evaluation. Eyes from male New Zealand White rabbits were used immediately or were stored overnight in phosphate-buffered saline (PBS) or Hanks balanced salt solution (HBSS) over wet ice. Integrity of isolated corneas was evaluated by measuring the TEER and by determining the permeability of paracellular and transcellular markers. Active transport was assessed by measuring transcorneal permeability of selected amino acids. Esterase activity was estimated using p-nitrophenyl assay. In all cases, corneas from freshly enucleated eyes were compared to those isolated from the day-old preserved eyes. Transcellular and paracellular passive diffusion was not affected by the storage medium and observed to be similar in the fresh and preserved eye models. However, amino acid transporters demonstrated lower functional activity in corneas excised from eyes preserved in PBS. Moreover, preserved eyes displayed almost 1.5-fold lower esterase activity in the corneal tissue. Thus, corneas isolated from day-old eyes, preserved in HBSS, closely mimics freshly excised rabbit corneas in terms of both active and passive transport characteristics but possesses slightly reduced enzymatic activity.

Sustained release and permeation of timolol from surface-modified solid lipid nanoparticles through bioengineered human cornea

PURPOSE

The aim of the study was to formulate and evaluate surface-modified solid lipid nanoparticles sustained delivery system of timolol hydrogen maleate, a prototype ocular drug using a human cornea construct.

MATERIALS AND METHODS

Surface-modified solid lipid nanoparticles containing timolol with and without phospholipid were formulated by melt emulsification with high-pressure homogenization and characterized by particle size, wide-angle X-ray diffraction, encapsulation efficiency, and in vitro drug release. Drug transport studies through cornea bioengineered from human donor cornea cells were carried out using a modified Franz diffusion cell and drug concentration analyzed by high-performance liquid chromatography.

RESULTS

Results show that surface-modified solid lipid nanoparticles possessed very small particles (42.9 +/- 0.3 nm, 47.2 +/- 0.3 nm, 42.7 +/- 0.7 nm, and 37.7 +/- 0.3 nm, respectively for SM-SLN 1, SM-SLN 2, SM-SLN 3, and SM-SLN 4) with low polydispersity indices, increased encapsulation efficiency (> 44%), and sustained in vitro release compared with unmodified lipid nanoparticles whose particles were greater than 160 nm. Permeation of timolol hydrogen maleate from the surface-modified lipid nanoparticles across the cornea construct was sustained compared with timolol hydrogen maleate solution in distilled water.

CONCLUSIONS

Surface-modified solid lipid nanoparticles could provide an efficient way of improving ocular bioavailability of timolol hydrogen maleate.

[A comparative in vitro analysis of primary and immortalized keratocytes]

BACKGROUND

The cultivation of primary keratocytes (HCKp) is difficult and influenced by a multitude of factors. In this study it was examined if immortalized keratocytes (HCKi) can replace HCKp in experiments and be useful in the development of a cornea construct.

METHODS

HCKp and HCKi were cultivated and incubated for 72 h with benzalkonium chloride (BAC) or cetrimide at concentrations of 40-0.1 microg/ml or 100-0.01 microg/ml. The vitality and the doubling time (tv) were measured.

RESULTS

Treatment with 40 or 4 microg/ml BAC as well as 100 or 10 microg/ml cetrimide led to cell death. The tv was shortened in HCKi especially in cells that were treated with BAC, but only HCKp showed a significant loss of vitality. In cells treated with cetrimide the tv increased significantly in both cell lines and no loss of vitality was detected from 0.1 microg/ml onwards in both cell lines.

CONCLUSION

HCKi are more resistant and proliferative than HCKp but they can be used in preliminary experiments as an alternative to primary cells in for example toxicity studies if the detectable differences between the two cell lines, such as the capacity for proliferation and reaction to agents are taken into consideration.

Characterization of human corneal epithelial cell model as a surrogate for corneal permeability assessment: metabolism and transport

The recently introduced Clonetics human corneal epithelium (cHCE) cell line is considered a promising in vitro permeability model, replacing excised animal cornea to predict corneal permeability of topically administered compounds. The purpose of this study was to further characterize cHCE as a corneal permeability model from both drug metabolism and transport aspects. First, good correlation was found in the permeability values (P(app)) obtained from cHCE and rabbit corneas for various ophthalmic drugs and permeability markers. Second, a previously established real-time quantitative polymerase chain reaction method was used to profile mRNA expression of drug-metabolizing enzymes (major cytochromes P450 and UDP glucuronosyltransferase 1A1) and transporters in cHCE in comparison with human cornea. Findings indicated that 1) the mRNA expression of most metabolizing enzymes tested was lower in cHCE than in excised human cornea, 2) the mRNA expression of efflux transporters [multidrug resistant-associated protein (MRP) 1, MRP2, MRP3, and breast cancer resistance protein], peptide transporters (PEPT1 and PEPT2), and organic cation transporters (OCTN1, OCTN2, OCT1, and OCT3) could be detected in cHCE as in human cornea. However, multidrug resistance (MDR) 1 and organic anion transporting polypeptide 2B1 was not detected in cHCE; 3) cHCE was demonstrated to possess both esterase and ketone reductase activities known to be present in human cornea; and 4) transport studies using probe substrates suggested that both active efflux and uptake transport may be limited in cHCE. As the first detailed report to delineate drug metabolism and transport characteristics of cHCE, this work shed light on the usefulness and potential limitations of cHCE in predicting the corneal permeability of ophthalmic drugs, including ester prodrugs, and transporter substrates.

Cell culture models of the human cornea - a comparative evaluation of their usefulness to determine ocular drug absorption in-vitro

Cell culture models of the cornea are continually developed to replace the isolated animal cornea for transcorneal drug absorption studies. The aim of this study was to determine and compare epithelial tightness and permeability of currently available corneal cell culture models to avoid interlaboratory variability and to assess their usefulness for in-vitro permeation studies. Pure epithelial cell culture models (CEPI, SIRC and HCE-T cell lines), primary cultures of human corneal epithelium (HCEpiC) and the two commercially available models (RHC and Epiocular), as well as organotypic human cornea constructs (HCC, HCC-HCE-T), were investigated and data were compared with those obtained from the excised bovine cornea. Barrier properties were assessed by measurements of transepithelial electrical resistance (TEER) and permeability of three passively absorbed substances (mannitol, testosterone and timolol maleate) with different physico-chemical properties. TEER experiments revealed weak barrier functions for all of the investigated epithelial models (<or=100-200 Omega cm2), except the HCE-T cell line. Transport studies confirmed TEER results insofar that models showing low TEER values also had higher permeation rates in comparison with the excised bovine cornea. However, models based on HCE-T cells demonstrated similar barrier properties to isolated corneal tissue. The corneal models investigated in our laboratory show clear differences in epithelial barrier function. In-vitro systems comprising the HCE-T cell line seem to be most appropriate to replace excised animal cornea for assessing corneal permeability.

A Comparative Evaluation of Corneal Epithelial Cell Cultures for Assessing Ocular Permeability

The purpose of this study was to evaluate the potential value of different epithelial cell culture systems as in vitro models for studying corneal permeability. Transformed human corneal epithelial (HCE-T) cells and Statens Serum Institut rabbit corneal (SIRC) cells were cultured on permeable filters. SkinEthic human corneal epithelium (S-HCE) and Clonetics human corneal epithelium (C-HCE) were received as ready-to-use systems. Excised rabbit corneas (ERCs) and human corneas (EHCs) were mounted in Ussing chambers, and used as references. Barrier properties were assessed by measuring transepithelial electrical resistance, and by determining the apparent permeability of markers with different physico–chemical properties, namely, fluorescein, sodium salt; propranolol hydrochloride; moxaverine hydrochloride; timolol hydrogenmaleate; and rhodamine 123. SIRC cells and the S-HCE failed to develop epithelial barrier properties, and hence were unable to distinguish between the permeation markers. Barrier function and the power to differentiate compound permeabilities were evident with HCE-T cells, and were even more pronounced in the case of C-HCE, corresponding very well with data from ERCs and EHCs. A net secretion of rhodamine 123 was not observed with any of the models, suggesting that P-glycoprotein or similar efflux systems have no significant effects on corneal permeability. Currently available corneal epithelial cell culture systems show differences in epithelial barrier function. Systems lacking functional cell–cell contacts are of limited value for assessing corneal permeability, and should be critically evaluated for other purposes.

Morphological characteristics and proliferation of keratocytes cultured under simulated microgravity

This study probed the changes of keratocytes cultured under simulated microgravity. Keratocytes were isolated from rabbit corneas using collagenase digestion method. Cells were seeded in a 55-mL capacity high-aspect-ratio vessel (HARV) of rotary cell culture system (RCCS) at a density of 1 x 10(4) cells/mL. Dehydrated bovine acellular corneal stroma (5 x 5 x 1 mm, n = 30) was used as a carrier for keratocyte culture. Rotational speed was set at 15, 20, and 30 rpm in the first, second, and third week of culture, respectively. Histological evaluation showed that keratocytes in simulated microgravity culture grew into carriers, but those under conventional gravity grew on the surface of carriers. Scanning electron microscopic evaluation showed that after 19 days in culture, keratocytes on the carriers were spherical and spread in the spaces among the collagen fibers. Cells were dendritic or spindle shaped, and they developed many foot processes linked with surrounding cells. The absorbance values of the simulated microgravity group were significantly higher (P < 0.01) than that of the conventional group from 10 to 19 days of culture. The RCCS obviously enhanced the proliferation of rabbit keratocytes and facilitated the cells' growth into or on the dehydrated bovine acellular corneal stroma. Cells showed more natural morphology.

Influence of keratocytes and retinal pigment epithelial cells on the mechanical properties of polyester-based tissue engineering micropatterned films

In this paper the mechanical properties of micropatterned polyester films prepared to serve as tissue engineering scaffolds of cornea were examined. Films were prepared by solvent casting of blends of poly(l-lactide-co-d,l-lactide) and poly(3-hydroxybutyric acid-co-3-hydroxyvaleric acid), on a micropatterned silicon template. They were seeded with keratocytes or retinal pigment epithelial cells and subjected to tensile testing to assess the contribution of cells and the deposited extra-cellular matrix (ECM) to the mechanical properties of the scaffold. In all the tests, the films used were wet and the cells were not fixed. Cell-free scaffolds showed a gradual deterioration in strength upon incubation in the cell culture medium at 37 degrees C; the deterioration rate was highest in the first week and decreased significantly over the second and third weeks. The ultimate strength of the cell-free scaffolds decreased from 0.99 to 0.42N/mm after 21 days of incubation. Cell seeded scaffolds showed a more complicated mechanical strength profile. Their response was found to depend both on the extent of surface coverage and on the cell type. The results were examined after dividing the data into two groups of lower and higher stiffness. For keratocyte seeded scaffolds, the strength of the high stiffness groups continued to increase as the incubation period increased while the lower stiffness groups did not show a distinct change. For the keratocyte seeded scaffolds, tensile strength increased from 0.65N/mm on Day 7 to 0.73N/mm on Day 21. On the other hand, the scaffolds seeded with retinal pigment epithelial cells showed a gradual deterioration over time in both the higher and lower stiffness groups. For epithelial cell seeded scaffolds this was 0.98N/mm on Day 7 and decreased to 0.77N/mm on Day 21 still an improvement over the unseeded scaffolds. This most probably was a result of a lower rate of ECM secretion in comparison to keratocytes and the newly secreted ECM could not compensate for the influence of scaffold degradation on the mechanical properties. It could, therefore, be concluded that cell seeding plays a positive role in strengthening a tissue engineered construct, and cell type has a significant influence on the extent of this improvement.

Expression of ABC-transporters in human corneal tissue and the transformed cell line, HCE-T

PURPOSE

The aim of this study was to elucidate the expression pattern of transport proteins relevant to drug absorption in human cornea and to assess the human corneal epithelial cell line, HCE-T, regarding its use as an in vitro model for drug-absorption studies.

METHODS

Human corneal tissue and HCE-T cells were examined for the expression of P-glycoprotein (P-gp/MDR1), multidrug resistance-associated protein 1 (MRP1), multidrug resistance-associated protein 2 (MRP2), lung resistance-related protein (LRP), and breast cancer-resistance protein (BCRP), using reverse transcriptase-polymerase chain reaction and immunofluorescence microscopy. Moreover, transporter activity was measured by bi-directional flux studies across excised human cornea and HCE-T cell layers using a P-gp/MDR1 substrate, rhodamine 123 (Rh123).

RESULTS

Transport studies of Rh123 revealed no significant differences in fluxes in the apical-to-basolateral and basolateral-to-apical directions across excised human corneas or HCE-T cell layers, suggesting the absence or insignificant, if any, participation of P-gp/MDR1 to Rh123 fluxes. Of all the transporter proteins under investigation, only LRP was found in human cornea. By contrast, a signal for LRP was not found in HCE-T, but the expression of MRP1, MRP2, and BCRP could be confirmed. Of note is the lack of P-gp/MDR1 expression in any of the specimens we examined.

CONCLUSIONS

Only a limited array of ABC-transporters is functionally expressed in human cornea. The expression pattern of HCE-T cells appears to be widely different from that of the native corneal tissue. Hence, the in vitro model of human cornea, HCE-T, should be used with much caution when predicting transport rates across the human corneal epithelial barrier in vivo.

In Vitro Diffusion of the Immunosuppressant Tacrolimus Through Human and Rabbit Corneas

PURPOSE

The aim of this study was to investigate the in vitro diffusion kinetics of tacrolimus (TAC) through rabbit and human corneas, and to evaluate the suitability of rabbit cornea as an in vitro permeability model for human cornea.

METHODS

A flow-through diffusion apparatus was used for all permeability experiments. The percentage of total (3)H-TAC diffusing across the corneas was determined over 24 h and fractions collected twice-hourly (20 degrees C; 1.5 mL/h). An F test was used for whole-curve comparisons, with a significance level of 5%.

RESULTS

Steady-state values for TAC across both types of corneas were not reached. Although the percentage of TAC diffusing across rabbit cornea was higher than that found for human cornea up to 18 h, there were no statistically significant differences. The percentages of total TAC diffusing across human and rabbit cornea at the 24-h time points were 0.38% +/- 0.02% and 0.36% +/- 0.01%, respectively.

CONCLUSIONS

Percentages of total TAC at the 24-h time points were approximately 4.9x and 4.1x higher than those found previously for cyclosporin A across human and rabbit corneas, respectively. Rabbit corneas are a suitable model for human corneas in in vitro permeability studies.

Drug release and permeation studies of nanosuspensions based on solidified reverse micellar solutions (SRMS)

Solidified reverse micellar solutions (SRMS), i.e. mixtures of lecithin and triglycerides, offer high solubilisation capacities for different types of drugs in contrast to simple triglyceride systems [Friedrich, I., Müller-Goymann, C.C., 2003. Characterisation of SRMS and production development of SRMS-based nanosuspensions. Eur. J. Pharm. Biopharm. 56, 111-119]. Nanosuspensions based on SRMS were prepared by homogenisation close to the melting point of the SRMS matrix. In a first step the SRMS matrices of 1:1 (w/w) ratios of lecithin and triglycerides were loaded with 17beta-estradiol-hemihydrate (EST), hydrocortisone (HC) or pilocarpine base (PB), respectively, and subsequently ground in liquid nitrogen to minimise drug diffusion later on. The powder was then dispersed in a polysorbate 80 solution using high pressure homogenisation. The drug loading capacities of the nanosuspensions were very high in the case of poorly water-soluble EST (99% of total 0.1%, w/w, EST) and HC (97% of total 0.5%, w/w, HC) but not sufficient with the more hydrophilic PB (37-40% of total 1.0%, w/w, PB). These findings suggest SRMS-based nanosuspensions to be promising aqueous drug carrier systems for poorly soluble drugs like EST and HC. Furthermore, in vitro drug permeation from the different drug-loaded nanosuspensions was performed across human cornea construct (HCC) as an organotypical cell culture model. PB permeation did not differ from the nanosuspension and an aqueous solution whereas the permeation coefficients of HC-loaded nanosuspensions were reduced in comparison to aqueous and oily solutions of HC. However, the permeated amount was higher from the nanosuspensions due to a much lower HC concentration in the solution than that in the nanosuspension (solution 0.02%, w/w, versus nanosuspension 0.5%, w/w). The high drug load of the nanoparticles provides prolonged HC release. Permeated amounts of EST were reduced in comparison to HC and only detectable with an ELISA technique. The EST release from nanosuspensions and different EST-loaded systems revealed a prolonged EST release from the nanoparticulate systems in contrast to a faster release of an oily solution of an equal EST concentration. With regard to an aqueous EST suspension of similar concentration which represents a depot system the release rate from the nanosuspensions revealed the same order of magnitude which points again to a prolonged release potential of the nanosuspensions.

Esteraseaktivität eines organotypischen humanen Kornea-Konstrukts (HCC) als In-vitro-Modell für Permeationsuntersuchungen

Organotypic cornea equivalents are used as in vitro models for permeation studies. Many ophthalmic drugs are applied as ester prodrugs to achieve a higher bioavailability. The esterase activity of three corneal human cell lines (epithelial, stromal, endothelial cells) as well as of excised porcine cornea, human donor cornea and human cornea construct (HCC) was investigated and compared. Esterase activity was determined using p-nitrophenyl acetate and hydrocortisone acetate (HCA) as esterase substrates. Hydrocortisone acetate permeation across porcine cornea, human donor cornea and HCC was studied in vitro using Franz-diffusion cells. Corneal epithelial cells showed the highest esterase activity and only small differences to keratocytes and endothelial cells were detectable. The permeation barrier properties of the different corneal tissues were very similar in the case of HCA permeation whereas HCA metabolism rates were in the ranking order of porcine cornea > HCC > human donor cornea. Permeation and metabolism studies indicate that the in vitro permeation model HCC is able to adequately convert hydrocortisone acetate to hydrocortisone.