Design and development of dry powder sulfobutylether-β-cyclodextrin complex for pulmonary delivery of fisetin

Natural Products-Based Inhaled Formulations for Treating Pulmonary Diseases

Given the unique physiological and pathological characteristics of the lung, the direct, inhalable route is more conducive to pulmonary drug delivery and disease control than traditional systemic drug delivery, significantly circumventing drug loss, off-target effects, systemic and organ toxicity, etc., and is widely regarded as the preferred regimen for pulmonary drug delivery. However, very few lung diseases are currently treated with the preferred inhaled formulations, such as asthma, chronic obstructive pulmonary disease and pulmonary hypertension. And there is a lack of appropriate inhaled formulations for other critical lung diseases, such as lung cancer and pulmonary fibrosis, due to the fact that the physicochemical properties of the drugs and their pharmacokinetic profiles do not match the physiology of the lung, and conventional inhalation devices are unable to deliver them to the specific parts of the lung. Phytochemicals of natural origin, due to their wide availability and clear safety profile, hold great promise for the preparation of inhalable formulations to improve the current dilemma in the treatment of lung diseases. In particular, the preparation of inhalable formulations based on nano- and microparticulate carriers for drug delivery to deep lung tissues, which overcome the shortcomings of conventional inhalation therapies while targeting the drug activity directly to a specific part of the lung, may be the best approach to change the current dilemma of lung disease treatment. In this review, we discuss recent advances in nano- and micron-carrier-based inhalation formulations for the delivery of natural products for the treatment of pulmonary diseases, which may represent an opportunity for practical clinical translation of natural products.

Preparation and Characterisation of Zinc Diethyldithiocarbamate-Cyclodextrin Inclusion Complexes for Potential Lung Cancer Treatment

Zinc diethyldithiocarbamate (Zn (DDC)2), a disulfiram metabolite (anti-alcoholism drug), has shown a strong anti-cancer activity in vitro. However, its application was limited by its low aqueous solubility and rapid metabolism. In this study, the solubility enhancement of Zn (DDC)2 is investigated by forming inclusion complexes with cyclodextrins. The inclusion complexes were prepared using two different types of beta-cyclodextrins, SBE-CD and HP-CD. Phase solubility diagrams for the resulting solutions were assessed; subsequently, the solutions were freeze-dried for further characterisation studies using DSC, TGA, XRD, and FTIR. The cytotoxic activity of the produced inclusion complexes was evaluated on human lung carcinoma cells using the MTT assay. The solubility of Zn (DDC)2 increased significantly upon adding beta-cyclodextrins, reaching approximately 4 mg/mL for 20% w/w CD solutions. The phase solubility diagram of Zn (DDC)2 was of the Ap-type according to the Higuchi and Connors model. Characterisation studies confirmed the inclusion of the amorphous drug in the CD-Zn (DDC)2 complexes. The cytotoxicity of Zn (DDC)2 was enhanced 10-fold by the inclusion complexes compared to the free drug. Overall, the resulting CD-Zn (DDC)2 inclusion complexes have a potential for treatment against lung cancer.

Inhaled Medicines for Targeting Non-Small Cell Lung Cancer

Throughout the years, considerable progress has been made in methods for delivering drugs directly to the lungs, which offers enhanced precision in targeting specific lung regions. Currently, for treatment of lung cancer, the prevalent routes for drug administration are oral and parenteral. These methods, while effective, often come with side effects including hair loss, nausea, vomiting, susceptibility to infections, and bleeding. Direct drug delivery to the lungs presents a range of advantages. Notably, it can significantly reduce or even eliminate these side effects and provide more accurate targeting of malignancies. This approach is especially beneficial for treating conditions like lung cancer and various respiratory diseases. However, the journey towards perfecting inhaled drug delivery systems has not been without its challenges, primarily due to the complex structure and functions of the respiratory tract. This comprehensive review will investigate delivery strategies that target lung cancer, specifically focusing on non-small-cell lung cancer (NSCLC)-a predominant variant of lung cancer. Within the scope of this review, active and passive targeting techniques are covered which highlight the roles of advanced tools like nanoparticles and lipid carriers. Furthermore, this review will shed light on the potential synergies of combining inhalation therapy with other treatment approaches, such as chemotherapy and immunotherapy. The goal is to determine how these combinations might amplify therapeutic results, optimizing patient outcomes and overall well-being.

Inhalation Dosage Forms: A Focus on Dry Powder Inhalers and Their Advancements

In this review, an extensive analysis of dry powder inhalers (DPIs) is offered, focusing on their characteristics, formulation, stability, and manufacturing. The advantages of pulmonary delivery were investigated, as well as the significance of the particle size in drug deposition. The preparation of DPI formulations was also comprehensively explored, including physico-chemical characterization of powders, powder processing techniques, and formulation considerations. In addition to manufacturing procedures, testing methods were also discussed, providing insights into the development and evaluation of DPI formulations. This review also explores the design basics and critical attributes specific to DPIs, highlighting the significance of their optimization to achieve an effective inhalation therapy. Additionally, the morphology and stability of 3 DPI capsules (Spiriva, Braltus, and Onbrez) were investigated, offering valuable insights into the properties of these formulations. Altogether, these findings contribute to a deeper understanding of DPIs and their development, performance, and optimization of inhalation dosage forms.

Preparation and evaluation of βcyclodextrin-based nanosponges loaded with Budesonide for pulmonary delivery

Budesonide (BUD) is a glucocorticosteroid used to treat chronic obstructive pulmonary disease. Despite this, it is a hydrophobic compound with low bioavailability. To address these hurdles, non-toxic and biocompatible βcyclodextrin-based nanosponges (βCD-NS) were attempted. BUD was loaded on five different βCD-NS at four different ratios. NS with 1,1'-carbonyldiimidazole (CDI) as a crosslinking agent, presented a higher encapsulation efficiency ( ̴ 80%) of BUD at 1:3 BUD: βCD-NS ratio (BUD-βCD-NS). The optimized formulations were characterized by Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), water absorption capacity (WAC), scanning electron microscopy (SEM), X-ray powder diffraction studies (XRD), particle size, zeta potential, encapsulation efficiency, in vitro and in vivo release studies, acute toxicity study, solid-state characterization, and aerosol performance. In vitro-in vivo correlation and cytotoxicity of the formulations on alveolar cells in vitro were further determined. In vitro and in vivo studies showed almost complete drug release and drug absorption from the lungs in the initial 2 h for pure BUD, which were sustained up to 12 h from BUD loaded into nanosponges (BUD-βCD-NS). Acute toxicity studies and in vitro cytotoxicity studies on alveolar cells proved the safety of BUD-βCD-NS. Several parameters, including particle size, median mass aerodynamic diameter, % fine particle fraction, and % emitted dose, were evaluated for aerosol performance, suggesting the capability of BUD-βCD-NS to formulate as a dry powder inhaler (DPI) with a suitable diluent. To sum up, this research will offer new insights into the future advancement of βCD-NS as drug delivery systems for providing controlled release of therapeutic agents against pulmonary disease.

Fisetin-In Search of Better Bioavailability-From Macro to Nano Modifications: A Review

As secondary plant metabolites, polyphenols are abundant in fruits and vegetables. They are in high demand because of their many health benefits. However, their low bioavailability makes them complex compounds to use for therapeutic purposes. Due to the limited solubility of phytocompounds, dietary supplements made from them may only be partially effective. Such molecules include fisetin, found in strawberries, and have shown great promise in treating Alzheimer's disease and cancer. Unfortunately, because of their limited water solubility, low absorption, and poor bioavailability, the assistance of nanotechnology is required to allow them to fulfil their potential fully. Here, we provide evidence that nanodelivery methods and structure modifications can improve fisetin bioavailability, which is linked to improvements in therapeutic efficacy. An open question remains as to which nanocarrier should be chosen to meet the abovementioned requirements and be able to enhance fisetin's therapeutic potential to treat a particular disease.

Enhancing bioavailability of natural extracts for nutritional applications through dry powder inhalers (DPI) spray drying: technological advancements and future directions

Natural ingredients have many applications in modern medicine and pharmaceutical projects. However, they often have low solubility, poor chemical stability, and low bioavailability in vivo. Spray drying technology can overcome these challenges by enhancing the properties of natural ingredients. Moreover, drug delivery systems can be flexibly designed to optimize the performance of natural ingredients. Among the various drug delivery systems, dry powder inhalation (DPI) has attracted much attention in pharmaceutical research. Therefore, this review will focus on the spray drying of natural ingredients for DPI and discuss their synthesis and application.

Instant Formulation of Inhalable Beclomethasone Dipropionate-Gamma-Cyclodextrin Composite Particles Produced Using Supercritical Assisted Atomization

Medical composites derived from Gamma-cyclodextrin (γ-CD) and beclomethasone dipropionate-gamma-cyclodextrin (BDP-γ-CD) are synthesized over supercritical-assisted atomization (SAA) herein. Carbon dioxide, which serves the dual function of spraying medium and co-solute, is incorporated in this process along with the ethanolic solvent. Results indicate that, for fine spherical particles, optimized aerosol performance could be obtained with 50.0% (w/w) ethanolic solvent, precipitator, and saturator at 373.2 K and 353.2 K, respectively, and carbon dioxide-to-γ-CD flow ratio of 1.8 in the presence of 10 wt% leucine (LEU) as dispersion enhancer. It is also noted that γ-CD solution at low concentration typically renders better aerosol performance of the particles. During drug particle-derivation, the solubility of drug BDP elevated considerably due to the formation of inclusion complexes, further assisted by the ethanolic solvent which increases the lipophilicity of BDP. Meanwhile, the in vitro aerosolization and dissolution performance of drug composites derived from varied γ-CD-to-BDP mass ratio (Z) were also evaluated. It was found that high Z promises higher fine particle fraction in the obtained drug composite while the dissolution rate of active ingredient (BDP) exhibits positive correlation to the content of water-soluble excipient (γ-CD) in the formulation. This study offers a new avenue for instant drug formulation with promising pulmonary delivery over the SAA technique.

Allyl isothiocyanate dry powder inhaler based on cyclodextrin-metal organic frameworks for pulmonary delivery

In this study, allyl isothiocyanate (AITC) was prepared as the dry powder inhalation by loading cyclodextrin metal-organic framework (CD-MOF) to enhance pulmonary delivery. β-CD-MOF and γ-CD-MOF both could be used to carry AITC with the optimal loading conditions (50˚C, n _CD: n _AITC = 1:7, 7 h). Compared with β-CD-MOF, γ-CD-MOF had more advantages in AITC loading due to its high drug loading and stable crystal morphology. The particle size and the mass median aerodynamic diameter of γ-CD-MOF-AITC were accorded with the aerodynamic characteristics of lung inhalation. γ-CD-MOF-AITC might be deposited effectively in the deep lung, and the release rate of AITC reached over 90% within 5 min. Meanwhile, it had good pulmonary local tolerance, permeability, and no significant toxicity. Such results indicated that γ-CD-MOF could be used as a dry powder inhaler carrier to deliver safely AITC to lung and increase its pulmonary absorption.

Formulation, Characterization, Anti-Inflammatory and Cytotoxicity Study of Sesamol-Laden Nanosponges

Sesamol (SES) possesses remarkable chemotherapeutic activity, owing to its anti-inflammatory and antioxidant potential. However, the activity of SES is mainly hampered by its poor physicochemical properties and stability issues. Hence, to improve the efficacy of this natural anti-inflammatory and cytotoxic agent, it was loaded into β-cyclodextrin nanosponges (NS) prepared using different molar ratios of polymer and crosslinker (diphenyl carbonate). The particle size of SES-laden NS (SES-NS) was shown to be in the nano range (200 to 500 nm), with a low polydispersity index, an adequate charge (-17 to -26 mV), and a high payload. Field emission scanning electron microscopy, thermogravimetric analysis, and Fourier transform infrared spectroscopy were used to characterize the bioactive-loaded selected batch (SES-NS6). This batch of nanoformulations showed improved solubilization efficacy (701.88 µg/mL) in comparison to bare SES (244.36 µg/mL), polymer (β-CD) (261.43 µg/mL), and other fabricated batches. The drug release data displayed the controlled release behavior of SES from NS. The findings of the egg albumin denaturation assay revealed the enhanced anti-inflammatory potential of SES-NS as compared to bare SES. Further, the cytotoxicity assay showed that SES-NS was more effective against B16F12 melanoma cell lines than the bioactive alone. The findings of this assay demonstrated a reduction in the IC₅₀ values of SES-NS (67.38 μg/mL) in comparison to SES (106 μg/mL). The present investigation demonstrated the in vitro controlled release pattern and the enhanced anti-inflammatory and cytotoxic activity of SES-NS, suggesting its potential as a promising drug delivery carrier for topical delivery.

Antinociceptive effects of bupivacaine and its sulfobutylether-β-cyclodextrin inclusion complex in orofacial pain

Bupivacaine hydrochloride (BVC) represents an option to produce long-lasting analgesia, and complexation in cyclodextrins has shown improvements in biopharmaceutical properties. This study aimed to characterize and test the cytotoxicity and antinociceptive effects of BVC complexed in sulfobutylether-β-cyclodextrin (SBEβCD). The kinetics and stoichiometry of complexation and BVC-SBEβCD association constant were evaluated by phase solubility study and Job's plot. Evidence of the BVC-SBEβCD complex formation was obtained from scanning electron microscopy (SEM), infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). The cytotoxicity was evaluated in keratinocyte (HaCaT) and neuroblastoma (SH-SY5Y). Antinociceptive effects were registered via orofacial pain models: the formalin test, carrageenan-induced hyperalgesia, and postoperative pain (intraoral incision). The complex formation occurred at a 1:1 BVC-SBEβCD molar ratio, with a low association constant (13.2 M^-1). SEM, DSC, and FTIR results demonstrated the host-guest interaction. The IC_50% values determined in SH-SY5Y were 216 µM and 149 µM for BVC and BVC-SBEβCD, respectively (p < 0.05). There was no difference in HaCaT IC_50%. In orofacial pain model, BVC-SBEβCD significantly prolonged antinociceptive effect, in about 2 h, compared to plain BVC. SBEβCD can be used as a drug delivery system for bupivacaine, whereas the complex showed long-lasting analgesic effects.

Immediate Release Formulation of Inhaled Beclomethasone Dipropionate-Hydroxypropyl-Beta-Cyclodextrin Composite Particles Produced Using Supercritical Assisted Atomization

In this study, the enhanced solubilization performance of a poorly soluble drug, beclomethasone dipropionate (BDP), was investigated using hydroxypropyl-β-cyclodextrin (HP-β-CD) and ethanol. The enhanced solubility of the drug was determined using the phase solubility method and correlated as a function of both HP-β-CD and ethanol concentrations. The effective progress of drug solubility originated from the formation of cyclodextrin and BDP inclusion complexes and increase in the lipophilicity of the medium, by aqueous ethanol, for hydrophobic BDP. BDP and HP-β-CD composite particles were produced using supercritical assisted atomization (SAA) with carbon dioxide as the spraying medium, 54.2% (w/w) aqueous ethanol as the solvent, and an optimal amount of the dispersion enhancer leucine. The effect of the mass ratio of HP-β-CD to BDP (Z) on the in vitro aerosolization and in vitro dissolution performance of BDP-HP-β-CD composite particles was evaluated. The aerosolization performance showed that the fine particles fraction (FPF) of the composite particles increased with increasing mass ratio. The water-soluble excipient (HP-β-CD) effectively enhance the dissolution rate of BDP from composite particles. This study suggests that BDP-HP-β-CD composite particles produced using SAA can be employed in immediate-release drug formulations for pulmonary delivery.

Recent Updates on Supramolecular-Based Drug Delivery - Macrocycles and Supramolecular Gels

Supramolecules-based drug delivery has attracted significant recent research attention as it could enhance drug solubility, retention time, targeting, and stimuli responsiveness. Among the different supramolecules and assemblies, the macrocycles and the supramolecular hydrogels are the two important categories investigated to a greater extent. Here, we provide the most recent advancements in these categories. Under macrocycles, reports on drug delivery by cyclodextrins, cucurbiturils, calixarenes/pillararenes, crown ethers and porphyrins are detailed. The second category discusses the supramolecular hydrogels of macrocycles/polymers and low molecular weight gelators. The updated information provided could be helpful to advance R & D in this vital area.

Pulmonary delivery of resveratrol-β-cyclodextrin inclusion complexes for the prevention of zinc chloride smoke-induced acute lung injury

Smoke bombs are often used in military/fire training, which can produce a large amount of zinc chloride (ZnCl₂) smoke. Inhalation of ZnCl₂ smoke usually causes acute lung injury (ALI) that would likely develop to acute respiratory distress syndrome (ARDS). However, there is no effective prevention or treatment strategy for the smoke-induced ALI. Resveratrol (RES) is a natural polyphenol with good anti-inflammatory and anti-apoptotic activities, but its low solubility, stability, and bioavailability restrict its clinical application. In this study, an inhalable RES formulation composed of RES-β-cyclodextrin inclusion complexes (RES-β-CD) was prepared for the prevention of ZnCl₂ smoke-induced ALI. RES-β-CD powders had a small mass median aerodynamic diameter of 3.61 μm and a high fine particle fraction of 38.84%, suitable for pulmonary inhalation. RES-β-CD exhibited low BEAS-2B cytotoxicity. Pulmonary delivery of RES-β-CD to mice remarkably prevented the smoke-induced ALI with downregulation of TNF-α, IL-1β, STAT3, and GATA3, and upregulation of T-bet and Foxp3. RES-β-CD protected the respiratory function, percutaneous oxygen saturation, physical activity, lung capillary integrity, and lung liquid balance, alleviating inflammation and apoptosis. Pulmonary delivery of the positive drug, budesonide (BUD), also alleviated the smoke-induced ALI by reduction of inflammation and cell apoptosis. RES-β-CD exhibited the regulation of the Th1/Th2 and Treg/Th17 balances, while BUD did not show any effect on immune balances. In conclusion, pulmonary delivery of RES-β-CD is a promising anti-inflammatory and anti-apoptosis strategy for the prevention of ZnCl₂ smoke-induced ALI by direct lung drug distribution and regulation of immune balance.

Fabrication and application of dimyristoyl phosphatidylcholine biomaterial-based nanocochleates dry powder inhaler for controlled release resveratrol delivery

Background

Resveratrol, a bioactive phytoconstituent, is used to treat chronic respiratory diseases. However, its clinical application was hampered due to its poor bioavailability. In the present study, controlled release of resveratrol loaded nanocochleate-based dry powder inhaler was investigated to improve its biopharmaceutical properties for pulmonary drug delivery. The in vivo toxicity study was performed in the healthy male albino Wistar rats by intracheal administration.

Results

Resveratrol loaded nanocochleate-based dry powder inhaler was prepared by lyophilizing the resveratrol loaded dimyristoylphosphatidylcholine sodium and calcium ion-based nanocochleates using mannitol as cryoprotectant. Resveratrol loaded nanocochleates showed a particle size and encapsulation efficiency of 329.18 ± 9.43 nm and 76.35 ± 3.65%, respectively. Resveratrol loaded nanocochleate-based dry powder exhibited a particle size of 102.21 ± 9.83 μm and satisfactory flowability with initial burst release followed by extended release up to 96 h. The in vitro drug deposition pattern using multistage cascade impactor showed 1.28-fold improvement in fine particle dose, and the in vivo toxicity potential by histopathological study in albino rats revealed safety of formulation.

Conclusions

Resveratrol loaded nanocochleate-based dry powder inhaler could serve as an efficient delivery system for the treatment of chronic respiratory diseases.

Graphical abstract

Liposomal remdesivir inhalation solution for targeted lung delivery as a novel therapeutic approach for COVID-19

Strong infectivity enables coronavirus disease 2019 (COVID-19) to rage throughout the world. Moreover, the lack of drugs with definite therapeutic effects further aggravates the spread of the pandemic. Remdesivir is one of the most promising anti-severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) drugs. However, the limited clinical effects make its therapeutic effect controversial, which may result from the poor accumulation and activation of remdesivir in the lung. Therefore, we developed lyophilized remdesivir liposomes (Rdv-lips) which can be reconstituted as liposomal aerosol for pulmonary delivery to improve the in vivo behavior of existing remdesivir cyclodextrin conclusion compound (Rdv-cyc) injections. Liposome encapsulation endowed remdesivir with much higher solubility and better biocompatibility. The in vitro liposomal aerosol characterization demonstrated that Rdv-lips possessed a mass median aerodynamic diameter of 4.118 µm and fine particle fraction (<5 µm) higher than 50%, indicating good pulmonary delivery properties. Compared to the Rdv-cyc intravenous injection group, the Rdv-lips inhalation group displayed a nearly 100-fold increase in the remdesivir-active metabolite nucleotide triphosphate (NTP) concentration and better NTP accumulation in the lung than the Rdv-cyc inhalation group. A faster transition from remdesivir to NTP of Rdv-lips (inhalation) could also be observed due to better cell uptake. Compared to other preparations, the superiority of Rdv-lips was further evidenced by the results of an in vivo safety study, with little possibility of inducing inflammation. In conclusion, Rdv-lips for pulmonary delivery will be a potent formulation to improve the in vivo behavior of remdesivir and exert better therapeutic effects in COVID-19 treatment.

Rational formulation engineering of fraxinellone utilizing 6-O-α-D-maltosyl-β-cyclodextrin for enhanced oral bioavailability and hepatic fibrosis therapy

Although Fraxinellone (Frax) isolated from Dictamnus albus L. possessed excellent anti-hepatic fibrosis activity, oral administration of Frax suffered from the inefficient therapeutic outcome in vivo due to negligible oral absorption. At present, the oral formulation of Frax is rarely exploited. For rational formulation design, we evaluated preabsorption risks of Frax and found that Frax was rather stable while poorly dissolved in the gastrointestinal tract (78.88 μg/mL), which predominantly limited its oral absorption. Further solubility test revealed the outstanding capacity of cyclodextrin derivatives (CDs) to solubilize Frax (6.8-12.8 mg/mL). This led us to study the inclusion complexes of Frax with a series of CDs and holistically explore their drug delivery performance. Characterization techniques involving ¹H-NMR, FT-IR, DSC, PXRD, and molecular docking confirmed the most stable binding interactions when Frax complexed with 6-O-α-D-maltosyl-β-cyclodextrin (G₂-β-CD-Frax). Notably, G₂-β-CD-Frax exhibited the highest solubilizing capacity, fast dissolution rate, and superior Caco-2 cell internalization with no obvious toxicity. Pharmacokinetic studies demonstrated markedly higher oral bioavailability of G₂-β-CD-Frax (5.8-fold that of free drug) than other Frax-CDs. Further, long-term administration of G₂-β-CD-Frax (5 mg/kg) efficiently inhibited CCl₄-induced hepatic fibrosis in the mouse without inducing any toxicity. Our results will inspire the continued advancement of optimal oral Frax formulations for anti-fibrotic therapy.

Characterization and Aerosolization Performance of HydroxyPropyl-Beta-Cyclodextrin Particles Produced Using Supercritical Assisted Atomization

In this study, hydroxypropyl-beta-cyclodextrin (HP-β-CD) particles were produced using supercritical assisted atomization (SAA) with carbon dioxide as the spraying medium or co-solute and aqueous ethanol solution as the solvent. The effects of several key factors on the morphology and size of the HP-β-CD particles were investigated. These factors included the solvent effect, temperatures of the precipitator and saturator, concentration of the HP-β-CD solution, and flow rate ratio of carbon dioxide to the HP-β-CD solution. The conducive conditions for producing fine spherical particles were 54.2% (w/w) aqueous ethanol as the solvent; precipitator and saturator temperatures of 373.2 K and 353.2 K, respectively; a flow rate ratio of carbon dioxide to HP-β-CD solution of 1.8; and low concentrations of HP-β-CD solution. The addition of leucine (LEU) enhanced the aerosol performance of the HP-β-CD particles, and the fine particle fraction (FPF) of the HP-β-CD particles with the addition of 13.0 mass% LEU was 1.8 times higher than that of the HP-β-CD particles without LEU. This study shows that LEU can act as a dispersion enhancer and that HP-β-CD particles produced using SAA can be used as pulmonary drug carriers.

Leucine as an excipient in spray dried powder for inhalation

Leucine is a promising excipient with several applications in the development of inhalable spray-dried powder of high- and low-dose drugs. The addition of leucine has exhibited significant enhancing effects on the aerosolization and physical stability of the produced particles. Here, we focus not only on the applications of leucine in inhalable spray-drying powders, but also on the underlying mechanisms by which the formulation and processing parameters dictate the behavior of leucine during the drying process and, therefore, its functionalities within the dried powder. Additionally, we highlight the current regulatory status of leucine. Such insights are important for more efficient utilization of leucine in the future, both for dry powder inhaler formulations and other pharmaceutical applications.

A homogenous nanoporous pulmonary drug delivery system based on metal-organic frameworks with fine aerosolization performance and good compatibility

Pulmonary drug delivery has attracted increasing attention in biomedicine, and porous particles can effectively enhance the aerosolization performance and bioavailability of drugs. However, the existing methods for preparing porous particles using porogens have several drawbacks, such as the inhomogeneous and uncontrollable pores, drug leakage, and high risk of fragmentation. In this study, a series of cyclodextrin-based metal-organic framework (CD-MOF) particles containing homogenous nanopores were delicately engineered without porogens. Compared with commercial inhalation carrier, CD-MOF showed excellent aerosolization performance because of the homogenous nanoporous structure. The great biocompatibility of CD-MOF in pulmonary delivery was also confirmed by a series of experiments, including cytotoxicity assay, hemolysis ratio test, lung function evaluation, in vivo lung injury markers measurement, and histological analysis. The results of ex vivo fluorescence imaging showed the high deposition rate of CD-MOF in lungs. Therefore, all results demonstrated that CD-MOF was a promising carrier for pulmonary drug delivery. This study may throw light on the nanoporous particles for effective pulmonary administration.

Cyclodextrin-based metal-organic frameworks for pulmonary delivery of curcumin with improved solubility and fine aerodynamic performance

Pulmonary drug delivery has attracted considerable attention in recent years. However, it is still a major challenge to deliver poorly water-soluble drugs to lungs with good solubility and fine aerodynamic performance. In this study, curcumin was loaded into cyclodextrin-based metal-organic frameworks (CD-MOFs) for pulmonary delivery. Compared with micronized curcumin prepared by jet milling, curcumin-loaded CD-MOFs (Cur-CD-MOFs) exhibited excellent aerodynamic performance, which was attributed to the unique porous structure and lower density of CD-MOFs. The dissolution test showed that the drug release rate of Cur-CD-MOFs was much faster than that of micronized curcumin. The all-atom molecular dynamic simulation showed that curcumin molecules were loaded into the hydrophobic cavities of CD-MOFs or entered into the large hydrophilic cavities to form nanoclusters. The elevated wettability of Cur-CD-MOFs and the unique spatial distribution feature of curcumin in porous interior of CD-MOFs might be favorable for the improved dissolution rate. The DPPH radical scavenging test showed that Cur-CD-MOFs had prominent antioxidant activities. Therefore, CD-MOFs were expected to be promising carriers for pulmonary delivery of poorly water-soluble drugs.

Technological evolution of cyclodextrins in the pharmaceutical field

We herein disclose how global cyclodextrin-based pharmaceutical technologies have evolved since the early 80s through a 1998 patents dataset retrieved from Derwent Innovation Index. We used text-mining techniques based on the patents semantic content to extract the knowledge contained therein, to analyze technologies related to the principal attributes of CDs: solubility, stability, and taste-masking enhancement. The majority of CDs pharmaceutical technologies are directed toward parenteral aqueous solutions. The development of oral and ocular formulations is rapidly growing, while technologies for nasal and pulmonary routes are emerging and seem to be promising. Formulations for topical, transdermal, vaginal, and rectal routes do not account for a high number of patents, but they may be hiding a great potential, representing opportunity research areas. Certainly, the progress in materials sciences, supramolecular chemistry, and nanotechnology, will influence the trend of that, apparently neglected, research. The bottom line, CDs pharmaceutical technologies are still increasing, and this trend is expected to continue in the coming years.

Patent monitoring allows the identification of relevant technologies and trends to prioritize research, development, and investment in both, academia and industry. We expect the scope of this approach to be applied in the pharmaceutical field beyond CDs technological applications.

Inclusion Complex of Docetaxel with Sulfobutyl Ether β-Cyclodextrin: Preparation, In Vitro Cytotoxicity and In Vivo Safety

Docetaxel (DTX), as a first-line anti-tumor drug, has been studied for decades for its diverse bioactivities. However, DTX presents poor solubility in water, low bioavailability and serious toxic side effects which has hindered its application in the clinic. To address these problems, docetaxel-sulfobutyl ether-β-cyclodextrin inclusion complex (DTX-SBE-β-CD) was prepared successfully by saturated aqueous solution method. Sulfobutyl ether β-cyclodetrin (SBE-β-CD) is used as delivery material. For this study, the inclusion complex of docetaxel with sulfobutyl ether β-cyclodetrin (DTX-SBE-β-CD) was prepared and optimized its properties to enhance the cytotoxicity of cancer cells. A large number of physical characterization results showed that DTX-SBE-β-CD inclusion complex was successfully prepared by saturated aqueous solution method. DTX-SBE-β-CD inclusion complex was optimized by Central Composite Design. DTX-SBE-β-CD had an inhibitory effect on the in vitro determination of MCF-7 and HepG2 cells by MTT assay. Pharmacokinetic studies were carried out on male Sprague–Dawley rats by tail injection, including the distribution, metabolism and elimination of DTX-SBE-β-CD in vivo. In the experimental study of inhibition of cancer cells, DTX and DTX-SBE-β-CD showed apparent concentration-dependent inhibitory actions on tumor cells and the inhibition of DTX-SBE-β-CD group was more obvious.

Cyclodextrin Complexation for Enhanced Stability and Non-invasive Pulmonary Delivery of Resveratrol-Applications in Non-small Cell Lung Cancer Treatment

Pulmonary drug delivery is a noninvasive therapeutic approach that offers many advantages including localized drug delivery and higher patient compliance. As with all formulations, the low aqueous solubility of a drug often poses a challenge in the formulation development. Thus, strategies such as cyclodextrin (CD) complexation have been utilized to overcome this challenge. Resveratrol (RES), a natural stilbene, has shown abundant anti-cancer properties. Due to many drawbacks of conventional chemotherapeutics, RES has been proposed as an emerging alternative with promising pharmacological effects. However, RES has limited therapeutic applications due to low water solubility, chemical stability, and bioavailability. This study was aimed at developing an inhalable therapy that would increase the aqueous solubility and stability of RES by complexation with sulfobutylether-β-cyclodextrin (SBECD). Phase solubility profiles indicated an optimal stoichiometric inclusion complex at 1:1 (SBECD:RES) ratio for formulation considerations. Physiochemical characterizations were performed to analyze CD-RES. Stability studies at pH 7.4 and in plasma indicated significant improvement in RES stability after complexation, with a much longer half-life. The mass median aerodynamic diameter (MMAD) of CD-RES was 2.6 ± 0.7 μm and fine particle fraction (FPF) of 83.4 ± 3.0% are suitable for pulmonary delivery and efficient deposition. Lung cancer was selected as the respiratory model disease, owing to its high relevance as the major cause of cancer deaths worldwide. Cell viability studies in 5 non-small-cell-lung-cancer (NSCLC) cell lines suggest CD-RES retained significant cytotoxic potential of RES. Taken together, CD-RES proves to be a promising inhalation treatment for NSCLC.

Development and physicochemical characterization of chitosan hydrochloride/sulfobutyl ether-β-cyclodextrin nanoparticles for cinnamaldehyde entrapment

In this work, the cinnamaldehyde (CA) loaded nanoparticles were synthesized by directly cross-linking chitosan hydrochloride (CSH) and sulfobutyl ether-β-cyclodextrin (SBE-β-CD). The CA/SBE-β-CD inclusion complex was firstly prepared, and its highest encapsulation efficiency (EE) was 86.34%. Field Emission Scanning Electron Microscope results indicated that the inclusion complex showed massive aggregates with a coarse and fluffy texture and irregular surface. Then, the inclusion complex interacted with CSH to form nanoparticles. The EE of CA in nanoparticles was improved. Atomic force microscopy showed the nanoparticles had regular and spherical morphology. Fourier transform infrared spectroscopy analysis demonstrated that CA was mainly encapsulated in the inner place of CSH/SBE-β-CD nanoparticles (CSNs). The enhanced thermal stability of the nanoparticles was found in differential scanning calorimeter. X-ray diffraction implied that CA-CSNs existed in the amorphous state. CA-CSNs had excellent slow release property. Further, the bacteriostatic effect of CA-CSNs was much better than that of CA and CSNs. All the results indicated that CSNs can be used as a promising carrier to encapsulate CA. PRACTICAL APPLICATIONS: CA is an effective antimicrobial and generally recognized as Safe-GRAS. CA also exhibits many other bioactivities and has been commonly used for digestive, cardiovascular and immune system diseases. However, CA is easy to be oxidized and volatilized during storage for poor water solubility. The nanoencapsulations display the capacities of enhancing solubility of bioactive compounds, protecting them from degradation, and prolonging their residence. In this manuscript, CA loaded nanoparticles were investigated. The results suggested that the nanoencapsulation could benefit for improving water solubility and stability of CA. This strategy could be helpful for its application and development in food preservation.

Inhalation of Tetrandrine-hydroxypropyl-β-cyclodextrin Inclusion Complexes for Pulmonary Fibrosis Treatment

Pulmonary fibrosis (PF) is a kind of interstitial lung disease with the features of progressive and often fatal dyspnea. Tetrandrine (TET) is the major active constituent of Chinese herbal Stephania tetrandra S. Moore, which has already applied clinically to treat rheumatism, lung cancer, and silicosis. In this work, a tetrandrine-hydroxypropyl-β-cyclodextrin inclusion compound (TET-HP-β-CD) was developed for the treatment of pulmonary fibrosis via inhalation administration. TET-HP-β-CD was prepared by the freeze-drying method and identified using the cascade impactor, differential scanning calorimetry (DSC), X-ray diffraction (XRD), and Fourier transform infrared spectrum (FT-IR). A bleomycin-induced pulmonary fibrosis rat model was used to assess the effects of inhaled TET and TET-HP-β-CD. Animal survival, hydroxyproline content in the lungs, and lung histology were detected. The results showed that inhalation of TET-HP-β-CD alleviated inflammation and fibrosis, limited the accumulation of hydroxyproline in the lungs, regulated protein expression in PF development, and improved postoperative survival. Moreover, nebulized delivery of TET-HP-β-CD accumulated chiefly in the lungs and limited systemic distribution compared with intravenous administration. The present results indicated that inhalation of TET-HP-β-CD is an attractive candidate for the treatment of pulmonary fibrosis.

Characterization, in Vitro and in Vivo Evaluation of Naringenin-Hydroxypropyl-ß-Cyclodextrin Inclusion for Pulmonary Delivery

Naringenin, a flavonoid compound which exists abundantly in Citrus fruits, is proven to possess excellent antitussive and expectorant effects. However, the clinical applications of naringenin are restricted by its poor solubility and low local concentration by oral administration. The aim of the present study is to prepare a naringenin-hydroxypropyl-β-cyclodextrin (naringenin-HPβCD) inclusion as an inhalation solution for pulmonary delivery. The naringenin-HPβCD inclusion was characterized by phase solubility study, XRD, differential scanning calorimetry (DSC), proton nuclear magnetic resonance (¹HNMR), and two-dimensional rotating frame Overhauser effect spectroscopy (2D ROESY). The in vitro permeability of the inclusion was evaluated on Calu-3 cells and the pharmacokinetic profile of pulmonary delivery was investigated in Sprague-Dawley (SD) rats. Based on the linear model of phase solubility study, the relationship between naringenin and HPβCD was identified as A^L type with a 1:1 stoichiometry. XRD, DSC, and NMR studies indicated that the entire naringenin molecule is encapsulated into the cavity of HPβCD. HPβCD could increase the concentration of naringenin in the epithelium-lining fluid (ELF) of Calu-3 cells and act as a sustained release system for naringenin. The pharmacokinetic profile of naringenin-HPβCD inclusion showed rapid response and higher local concentration by pulmonary delivery. In conclusion, pulmonary delivery of naringenin-HPβCD inclusion is a promising formulation strategy, which could provide a new possibility for the clinical application of naringenin.

Characterization and Formulation of Isoniazid for High-Dose Dry Powder Inhalation

Tuberculosis is a major health problem and remains one of the main causes of mortality. In recent years, there has been an increased interest in the pulmonary delivery of antibiotics to treat tuberculosis. Isoniazid is one of these antibiotics. In this study, we aimed to characterize isoniazid and formulate it into a dry powder for pulmonary administration with little or no excipient, and for use in the disposable Twincer^® inhaler. Isoniazid was jet milled and spray dried with and without the excipient l-leucine. Physiochemical characterization showed that isoniazid has a low Tg of −3.99 ± 0.18 °C and starts to sublimate around 80 °C. Milling isoniazid with and without excipients did not result in a suitable formulation, as it resulted in a low and highly variable fine particle fraction. Spray drying pure isoniazid resulted in particles too large for pulmonary administration. The addition of 5% l-leucine resulted in a fraction <5 µm = 89.61% ± 1.77% from spray drying, which dispersed well from the Twincer^®. However, storage stability was poor at higher relative humidity, which likely results from dissolution-crystallization. Therefore, follow up research is needed to further optimize this spray dried formulation.

Phytoconstituent based dry powder inhalers as biomedicine for the management of pulmonary diseases

Pulmonary disease represents a major global health issue. They are commonly treated by various synthetic molecules. But, frequent high-dose of oral and injectable drugs may lead to severe side effects and this juncture demands inhaled formulations that facilitate effective drug delivery to the lower airways with negligible side effects. Natural phytoconstituents or phytoalexin (i.e. plant antibiotics) have showed an unique treatment array with minimum side effects and great capability to treat intrapulmonary and extrapulmonary diseases compared to synthetic drugs. Moreover, the progress of disciplines such as nanotechnology, material science and particle engineering allows further improvement of the treatment capability and efficiency. This article review and analyze literatures on inhaled phytoconstituents which were published in the last 10 years. Additionally, it will also offer the researcher with some basic background information for phytoconstituents profile, formulation requirements and drug delivery systems.

A review on recent technologies for the manufacture of pulmonary drugs

This review discusses recent developments in the manufacture of inhalable dry powder formulations. Pulmonary drugs have distinct advantages compared with other drug administration routes. However, requirements of drugs properties complicate the manufacture. Control over crystallization to make particles with the desired properties in a single step is often infeasible, which calls for micronization techniques. Although spray drying produces particles in the desired size range, a stable solid state may not be attainable. Supercritical fluids may be used as a solvent or antisolvent, which significantly reduces solvent waste. Future directions include application areas such as biopharmaceuticals for dry powder inhalers and new processing strategies to improve the control over particle formation such as continuous manufacturing with in-line process analytical technologies.

Challenges for pulmonary delivery of high powder doses

In recent years there is an increasing interest in the pulmonary delivery of large cohesive powder doses, i.e. drugs with a low potency such as antibiotics or drugs with a high potency that need a substantial fraction of excipient(s) such as vaccines stabilized in sugar glasses. The pulmonary delivery of high powder doses comes with unique challenges. For low potency drugs, the use of excipients should be minimized to limit the powder mass to be inhaled as much as possible. To achieve this objective the inhaler design should be adapted to the properties of the API in order to achieve a compatible combination of the drug formulation and inhaler device. The inhaler should have an appropriate powder dosing principle for which prefilled compartments seem most appropriate. The drug formulation should not only allow for accurate filling of these compartments but also enable efficient compartment emptying during inhalation. The dispersion principle must have the capacity to disperse considerable amounts of powder in a short time frame that allows the powder to reach the deep lung. Last, but not least, the inhaler should be simple and intuitive in use, be cost-effective and exhibit accurate and consistent, preferably patient independent, pulmonary delivery performance.

Low density, good flowability cyclodextrin-raffinose binary carrier for dry powder inhaler: anti-hygroscopicity and aerosolization performance enhancement

BACKGROUND

The hygroscopicity of raffinose carrier for dry powder inhaler (DPI) was the main obstacle for its further application. Hygroscopicity-induced agglomeration would cause deterioration of aerosolization performance of raffinose, undermining the delivery efficiency.

METHODS

Cyclodextrin-raffinose binary carriers (CRBCs) were produced by spray-drying so as to surmount the above issue. Physicochemical attributes and formation mechanism of CRBCs were explored in detail. The flow property of CRBCs was examined by FT4 Powder Rheometer. Hygroscopicity of CRBCs was elucidated by dynamic vapor sorption study. Aerosolization performance was evaluated by in vitro deposition profile and in vivo pharmacokinetic profile of CRBC based DPI formulations.

RESULTS

The optimal formulation of CRBC (R₄) was proven to possess anti-hygroscopicity and aerosolization performance enhancement properties. Concisely, the moisture uptake of R₄ was c.a. 5% which was far lower than spray-dried raffinose (R₀, c.a. 65%). R₄ exhibited a high fine particle fraction value of 70.56 ± 0.61% and it was 3.75-fold against R₀. The pulmonary and plasmatic bioavailability of R₄ were significantly higher than R₀ (p < 0.05).

CONCLUSION

CRBC with anti-hygroscopicity and aerosolization performance enhancement properties was a promising approach for pulmonary drug delivery, which could provide new possibilities to the application of hygroscopic carriers for DPI.

Complex Formation of Resorufin and Resazurin with Β-Cyclodextrins: Can Cyclodextrins Interfere with a Resazurin Cell Viability Assay?

Resazurin (or Alamar Blue) is a poorly fluorescent dye. During the cellular reduction of resazurin, its highly fluorescent product resorufin is formed. Resazurin assay is a commonly applied method to investigate viability of bacterial and mammalian cells. In this study, the interaction of resazurin and resorufin with β-cyclodextrins was investigated employing spectroscopic and molecular modeling studies. Furthermore, the influence of β-cyclodextrins on resazurin-based cell viability assay was also tested. Both resazurin and resorufin form stable complexes with the examined β-cyclodextrins (2.0–3.1 × 10³ and 1.3–1.8 × 10³ L/mol were determined as binding constants, respectively). Cells were incubated for 30 and 120 min and treated with resazurin and/or β-cyclodextrins. Our results suggest that cyclodextrins are able to interfere with the resazurin-based cell viability assay that presumably results from the following mechanisms: (1) inhibition of the cellular uptake of resazurin and (2) enhancement of the fluorescence signal of the formed resorufin.

Fisetin: A bioactive phytochemical with potential for cancer prevention and pharmacotherapy

A wide variety of chronic diseases, such as neurodegenerative and cardiovascular disorders, diabetes mellitus, osteoarthtitis, obesity and various cancers, are now being treated with cost effective phytomedicines. Since synthetic medicines are very expensive, concerted efforts are being made in developing and poor countries to discover cost effective medicines for the treatment of non-communicable diseases (NCDs). Understanding the underlying mechanisms of bioactive medicines from natural sources would not only open incipient avenues for the scientific community and pharmaceutical industry to discover new drug molecules for the therapy of NCDs, but also help to garner knowledge for alternative therapeutic approaches for the management of chronic diseases. Fisetin is a polyphenolic molecule of flavonoids class, and belongs to the bioactive phytochemicals that have potential to block multiple signaling pathways associated with NCDs such as cell division, angiogenesis, metastasis, oxidative stress, and inflammation. The emerging evidence suggests that fisetin may be useful for the prevention and management of several types of human malignancies. Efforts are being made to enhance the bioavailability of fisetin after oral administration to prevent and/or treat cancer of the liver, breast, ovary and other organs. The intent of this review is to highlight the in vitro and in vivo activities of fisetin and to provide up-to-date information about the molecular interactions of fisetin with its cellular targets involved in cancer initiation, promotion and progression as well as to focus on strategies underway to increase the bioavailability and reduce the risk of deleterious effects, if any, associated with fisetin administration.

Pulmonary delivery of tea tree oil-β-cyclodextrin inclusion complexes for the treatment of fungal and bacterial pneumonia

Objectives

Bacterial pneumonia is a common cause of death worldwide. Tea tree oil (TTO) is a potent antimicrobial natural product, which is formulated in dry powder inhalers (DPIs) for the treatment of fungal and bacterial pneumonia.

Methods

Tea tree oil-β-cyclodextrin inclusion complexes (TTO-β-CD) were prepared and characterized. Aerodynamic properties of TTO-β-CD powders were measured. The rat models of fungal (Candida albicans) and bacterial (Acinetobacter baumannii) pneumonia were prepared. Saline, TTO, TTO-β-CD and the positive drug (fluconazole or penicillin) were directly delivered to the rat lungs. Pathological and biological assays were conducted.

Key findings

Tea tree oil-β-CD powders had an appropriate aerodynamic diameter of 5.59 μm and the fine particle fraction of 51.22%, suitable for pulmonary delivery. TTO-β-CD showed higher and similar antipneumonic effects on the rat models than fluconazole and penicillin, respectively. The effects of TTO-β-CD were higher than TTO alone. The antipneumonic mechanisms involved blocking the recruitment of leucocytes and neutrophils, eliminating the microbes, downregulating pro-inflammatory cytokines (including tumour necrosis factor-α, interleukin-1β and interleukin-6), suppressing cyclooxygenase 2 expression, and further reducing lung injury.

Conclusions

Inhaled TTO-β-CD powders have the advantages of portability, high stability, self-administration, high lung deposition and good antipneumonic effect. It is a promising DPI for the treatment of fungal and bacterial pneumonia.