Negative capacitance or inductive loop? – A general assessment of a common low frequency impedance feature

Hysteresis in memristors produces conduction inductance and conduction capacitance effects

Memristors are devices in which the conductance state can be alternately switched between a high and a low value by means of a voltage scan. In general, systems involving a chemical inductor mechanism as solar cells, asymmetric nanopores in electrochemical cells, transistors, and solid state memristive devices, exhibit a current increase and decrease over time that generates hysteresis. By performing small signal ac impedance spectroscopy, we show that memristors, or any other system with hysteresis relying on the conductance modulation effect, display intrinsic dynamic inductor-like and capacitance-like behaviours in specific input voltage ranges. Both the conduction inductance and the conduction capacitance originate in the same delayed conduction process linked to the memristor dynamics and not in electromagnetic or polarization effects. A simple memristor model reproduces the main features of the transition from capacitive to inductive impedance spectroscopy spectra, which causes a nonzero crossing of current-voltage curves.

Anticorrosive properties of chitosan-derivatives coatings on Mg AZ31 alloy in Hank's Balanced Salt Solution

This study describes the preparation of chitosan-derivatives coatings on AZ31 Mg alloy for corrosion protection in Hank's Balanced Salt Solution (HBSS). The derivatives were prepared by reacting chitosan with natural aldehydes (vanillin, benzaldehyde and cinnamaldehyde) and the coatings were characterized by means of water contact angle, scanning electron microscopy and swelling essays. The corrosion behavior of the samples was investigated using potentiodynamic polarization, electrochemical impedance spectroscopy and hydrogen evolution essays. All derivatives present superior corrosion protection than neat chitosan and the best performance is observed for the vanillin derivative with the highest modification degree, which present hydrogen evolution rate of 0.05 mL cm-2 day-1, below the tolerance limit for biomedical application, and |Z|max in the order of 104.6 Ω cm2 even after 14 days of exposure to the corrosive solution.

High-Performance and Stable Perovskite X-ray Detection and Imaging Based on a Ti Cathode

High-energy radiation detectors with a good imaging resolution, fast response, and high sensitivity are desired to operate at a high electric field. However, strong ion migration triggered by electrochemical reactions at the interface between a high-potential electrode and an organic-inorganic hybrid perovskite limits the stability of radiation detectors under a high electric field. Herein, we demonstrate that such ion migration could be effectively suppressed in devices with a Ti cathode, even at a high electric field of 50 V mm-1, through time-of-flight secondary-ion mass spectrometry. X-ray photoelectron spectroscopy illustrates that Ti-N bonds formed at the interface of MAPbBr3 perovskite single crystals/Ti electrode effectively inhibit the electrochemical reaction in organic-inorganic hybrid perovskite devices and ultimately improve the operating stability under a high electric field. The device with a Ti electrode reaches a high sensitivity of 96 ± 1 mC Gyair-1 cm-2 and a low detection limit of 2.8 ± 0.3 nGy s-1 under hard X-ray energy.

A New Family of Layered Metal-Organic Semiconductors: Cu/V-Organophosphonates

Herein, we report the design and synthesis of a layered redox-active, antiferromagnetic metal organic semiconductor crystals with the chemical formula [Cu(H2 O)2 V(µ-O)(PPA)2 ] (where PPA is phenylphosphonate). The crystal structure of [Cu(H2 O)2 V(µ-O)(PPA)2 ] shows that the metal phosphonate layers are separated by phenyl groups of the phenyl phosphonate linker. Tauc plotting of diffuse reflectance spectra indicates that [Cu(H2 O)2 V(µ-O)(PPA)2 ] has an indirect band gap of 2.19 eV. Photoluminescence (PL) spectra indicate a complex landscape of energy states with PL peaks at 1.8 and 2.2 eV. [Cu(H2 O)2 V(µ-O)(PPA)2 ] has estimated hybrid ionic and electronic conductivity values between 0.13 and 0.6 S m-1 . Temperature-dependent magnetization measurements show that [Cu(H2 O)2 V(µ-O)(PPA)2 ] exhibits short range antiferromagnetic order between Cu(II) and V(IV) ions. [Cu(H2 O)2 V(µ-O)(PPA)2 ] is also photoluminescent with photoluminescence quantum yield of 0.02%. [Cu(H2 O)2 V(µ-O)(PPA)2 ] shows high electrochemical, and thermal stability.

Natural Assembly of Electroactive Metallopolymers on the Electrode Surface: Enhanced Electrocatalytic Production of Hydrogen by [2Fe-2S] Metallopolymers in Neutral Water

A molecular catalyst attached to an electrode surface can offer the advantages of both homogeneous and heterogeneous catalysis. Unfortunately, some molecular catalysts constrained to a surface lose much or all of their solution performance. In contrast, we found that when a small molecule [2Fe-2S] catalyst is incorporated into metallopolymers of the form PDMAEMA-g-[2Fe-2S] (PDMAEMA = poly(2-dimethylamino)ethyl methacrylate) and adsorbed to the surface, the observed rate of hydrogen production increases to k_obs > 10⁵ s^-1 per active site with lower overpotential, increased lifetime, and tolerance to oxygen. Herein, the electrocatalytic performances of these metallopolymers with different length polymer chains are compared to reveal the factors that lead to this high performance. It was anticipated that smaller metallopolymers would have faster rates due to faster electron and proton transfers to more accessible active sites, but the experiments show that the rates of catalysis per active site are independent of the polymer size. Molecular dynamics modeling reveals that the high performance is a consequence of adsorption of these metallopolymers on the surface with natural assembly that brings the [2Fe-2S] catalytic sites into close contact with the electrode surface while maintaining exposure of the sites to protons in solution. The assembly is conducive to fast electron transfer, fast proton transfer, and a high rate of catalysis regardless of the polymer size. These results offer a guide to enhancing the performance of other electrocatalysts with incorporation into a polymer that provides an optimal interaction of the catalyst with the electrode and solution.

Mechanistic Study of Fast Performance Decay of PtCu Alloy-based Catalyst Layers for Polymer Electrolyte Fuel Cells through Electrochemical Impedance Spectroscopy

In the past, platinum-copper catalysts have proven to be highly active for the oxygen reduction reaction (ORR), but transferring the high activities measured in thin-film rotating disk electrodes (TF-RDEs) to high-performing membrane electrode assemblies (MEAs) has proven difficult due to stability issues during operation. High initial performance can be achieved. However, fast performance decay on a timescale of 24 h is induced by repeated voltage load steps with H₂/air supplied. This performance decay is accelerated if high relative humidity (>60% RH) is set for a prolonged time and low voltages are applied during polarization. The reasons and possible solutions for this issue have been investigated by means of electrochemical impedance spectroscopy and distribution of relaxation time analysis (EIS-DRT). The affected electrochemical sub-processes have been identified by comparing the PtCu electrocatalyst with commercial Pt/C benchmark materials in homemade catalyst-coated membranes (CCMs). The proton transport resistance (R_pt) increased by a factor of ~2 compared to the benchmark materials. These results provide important insight into the challenges encountered with the de-alloyed PtCu/KB electrocatalyst during cell break-in and operation. This provides a basis for improvements in the catalysts' design and break-in procedures for the highly attractive PtCu/KB catalyst system.

Anion Intercalation into Graphite Drives Surface Wetting

The unique layered structure of graphite with its tunable interlayer distance establishes almost ideal conditions for the accommodation of ions into its structure. The smooth and chemically inert nature of the graphite surface also means that it is an ideal substrate for electrowetting. Here, we combine these two unique properties of this material by demonstrating the significant effect of anion intercalation on the electrowetting response of graphitic surfaces in contact with concentrated aqueous and organic electrolytes as well as ionic liquids. The structural changes during intercalation/deintercalation were probed using in situ Raman spectroscopy, and the results were used to provide insights into the influence of intercalation staging on the rate and reversibility of electrowetting. We show, by tuning the size of the intercalant and the stage of intercalation, that a fully reversible electrowetting response can be attained. The approach is extended to the development of biphasic (oil/water) systems that exhibit a fully reproducible electrowetting response with a near-zero voltage threshold and unprecedented contact angle variations of more than 120° within a potential window of less than 2 V.

Electrical Charge Coupling Dominates the Hysteresis Effect of Halide Perovskite Devices

Hysteresis effects in ionic-electronic devices are a valuable resource for the development of switching memory devices that can be used in information storage and brain-like computation. Halide perovskite devices show frequent hysteresis in current-voltage curves that can be harnessed to build effective memristors. These phenomena can be often described by a set of highly nonlinear differential equations that involve current, voltage, and internal state variables, in the style of the famous Hodgkin-Huxley model that accounts for the initiation and temporal response of action potentials in biological neurons. Here we extend the neuron-style models that lead to chemical inductors by introducing a capacitive coupling in the slow relaxation variable. The extended model is able to explain naturally previous observations concerning the transition from capacitor to inductor in impedance spectroscopy of MAPbBr solar cells and memristors in the dark. The model also generates new types of oscillating systems by the generation of a truly negative capacitance distinct from the usual inductive effect.

Influence of Long-Period Stacked Ordered Phases on Inductive Impedance of Mg-Gd-Y-Zn-Zr-Ag Alloys

In this paper, the influence of long-period stacked ordered (LPSO) phases on the electrochemical impedance spectroscopy (EIS) of a Mg-Gd-Y-Zn-Zr-Ag alloy in 0.9 wt.% NaCl was investigated. The Mg-6Gd-3Y-1Zn-0.5Zr-0.3Ag (wt.%) alloy samples with and without LPSO phases in the grain interior (HOMO and LPSO, respectively) were prepared using different heat treatments. The EIS results showed that both the HOMO and LPSO samples' Nyquist diagrams contained two inductive loops. However, in the Nyquist plots of the LPSO samples, the inductive loops at 1.71-0.67 Hz appeared in the first quadrant rather than the fourth quadrant. Analysis of the fitting parameters illustrated that the abnormal shape of the inductive loops is related to greater values of the surface film capacitance C_f and double layer capacitance C_dl in the LPSO samples. Further investigations through corrosion morphology observation indicated that the greater values of C_f and C_dl in the LPSO samples resulted from the existence of intragranular LPSO phases that created more film-free areas. The above results show that a better understanding of the relationship between the inductive impedance and corrosion morphology of a Mg-6Gd-3Y-1Zn-0.5Zr-0.3Ag alloy in 0.9 wt.% NaCl solution was attained.

Q-lipid-containing membranes show high in-plane conductivity using a membrane-on-a-chip setup

The light-driven reactions of photosynthesis as well as the mitochondrial power supply are located in specialized membranes containing a high fraction of redox-active lipids. In-plane charge transfer along such cell membranes is currently thought to be facilitated by the diffusion of redox lipids and proteins. Using a membrane on-a-chip setup, we show here that redox-active model membranes can sustain surprisingly high currents (mA) in-plane at distances of 25 μm. We also show the same phenomenon in free-standing monolayers at the air-water interface once the film is compressed such that the distance between redox centers is below 1 nm. Our data suggest that charge transfer within cell walls hosting electron transfer chains could be enabled by the coupling of redox-lipids via simultaneous electron and proton in-plane hopping, similar to conductive polymers. This has major implications for our understanding of the role of lipid membranes, suggesting that Q-lipid-containing membranes may be essential for evolving the complex redox machineries of life.

Deep mantle origin of large igneous provinces and komatiites

Large igneous provinces (LIPs) resulted from intraplate magmatic events mobilizing volumes of magma up to several million cubic kilometers. LIPs and lavas with deep mantle sources have compositions ranging from komatiites found in Archean greenstone belts to basalts and picrites in Phanerozoic flood basalt and recent oceanic islands. In this study, we identify the mantle conditions appropriate to each type of lava based on an experimental study of the melting of pyrolite. The depth of the mantle source decreases from 600 to 700 km for the oldest komatiites to 100 to 300 km for picrites and basalts, and the extent of mantle melting ranges from 10 to 50%. We develop a geodynamical model that explains the origin of the hot mantle plumes capable of generating these melting P-T conditions. Within a superadiabatic temperature gradient persisting in the deep mantle, the ascent of hot mantle plumes creates excess temperatures up to 250 to 300 K by adiabatic decompression.

Understanding equivalent circuits in perovskite solar cells. Insights from drift-diffusion simulation

Perovskite solar cells (PSCs) have reached impressively high efficiencies in a short period of time; however, the optoelectronic properties of halide perovskites are surprisingly complex owing to the coupled ionic-electronic charge carrier dynamics. Electrical impedance spectroscopy (EIS) is a widely used characterization tool to elucidate the mechanisms and kinetics governing the performance of PSCs, as well as of many other semiconductor devices. In general, equivalent circuits are used to evaluate EIS results. Oftentimes these are justified via empirical constructions and the real physical meaning of the elements remains disputed. In this perspective, we use drift-diffusion numerical simulations of typical thin-film, planar PSCs to generate impedance spectra avoiding intrinsic experimental difficulties such as instability and low reproducibility. The ionic and electronic properties of the device, such as ion vacancy density, diffusion coefficients, recombination mechanism, etc., can be changed individually in the simulations, so their effects can be directly observed. We evaluate the resulting EIS spectra by comparing two commonly used equivalent circuits with series and parallel connections respectively, which result in two signals with significantly different time constants. Both circuits can fit the EIS spectra and by extracting the values of the elements of one of the circuits, the values of the elements of the other circuit can be unequivocally obtained. Consequently, both can be used to analyse the EIS of a PSC. However, the physical meaning of each element in each circuit could differ. EIS can produce a broad range of physical information. We analyse the physical interpretation of the elements of each circuit and how to correlate the elements of one circuit with the elements of the other in order to have a direct picture of the physical processes occurring in the device.

Chemical Inductor

A multitude of chemical, biological, and material systems present an inductive behavior that is not electromagnetic in origin. Here, it is termed a chemical inductor. We show that the structure of the chemical inductor consists of a two-dimensional system that couples a fast conduction mode and a slowing down element. Therefore, it is generally defined in dynamical terms rather than by a specific physicochemical mechanism. The chemical inductor produces many familiar features in electrochemical reactions, including catalytic, electrodeposition, and corrosion reactions in batteries and fuel cells, and in solid-state semiconductor devices such as solar cells, organic light-emitting diodes, and memristors. It generates the widespread phenomenon of negative capacitance, it causes negative spikes in voltage transient measurements, and it creates inverted hysteresis effects in current-voltage curves and cyclic voltammetry. Furthermore, it determines stability, bifurcations, and chaotic properties associated to self-sustained oscillations in biological neurons and electrochemical systems. As these properties emerge in different types of measurement techniques such as impedance spectroscopy and time-transient decays, the chemical inductor becomes a useful framework for the interpretation of the electrical, optoelectronic, and electrochemical responses in a wide variety of systems. In the paper, we describe the general dynamical structure of the chemical inductor and we comment on a broad range of examples from different research areas.

Evaluating the Capacitive Response in Metal Halide Perovskite Solar Cells

The perovskites solar cells (PSCs) is composed of multifaceted device architecture and involve complex charge extraction (both electronic and ionic), this makes the task demanding to unlock the origin of the different physical process that occurs in a PSC. The capacitance in PSCs depends on several external perturbations including frequency, illumination, temperature, applied bias, and importantly on the interface modification of perovskites/charge selective contact. Arguably, different features including interfacial and bulk; ionic, and electronic charge transport in PSCs occur at different time scales. Capacitance spectroscopy is a prevailing technique to unravel the various physical phenomenon that occurs in a PSC at different time scales. A deeper knowledge of the capacitive response of a PSCs is essential to understand the charge carrier kinetics and unlock the device physics. This work highlights the capacitive response of PSCs and its application to unlock the device physics which is essential for the further optimization and improvement of the device performance.

Impedance Spectroscopy of Metal Halide Perovskite Solar Cells from the Perspective of Equivalent Circuits

Impedance spectroscopy (IS) provides a detailed understanding of the dynamic phenomena underlying the operation of photovoltaic and optoelectronic devices. Here we provide a broad summary of the application of IS to metal halide perovskite materials, solar cells, electrooptic and memory devices. IS has been widely used to characterize perovskite solar cells, but the variability of samples and the presence of coupled ionic-electronic effects form a complex problem that has not been fully solved yet. We summarize the understanding that has been obtained so far, the basic methods and models, as well as the challenging points still present in this research field. Our approach emphasizes the importance of the equivalent circuit for monitoring the parameters that describe the response and providing a physical interpretation. We discuss the possibilities of models from the general perspective of solar cell behavior, and we describe the specific aspects and properties of the metal halide perovskites. We analyze the impact of the ionic effects and the memory effects, and we describe the combination of light-modulated techniques such as intensity modulated photocurrent spectroscopy (IMPS) for obtaining more detailed information in complex cases. The transformation of the frequency to time domain is discussed for the consistent interpretation of time transient techniques and the prediction of features of current-voltage hysteresis. We discuss in detail the stability issues and the occurrence of transformations of the sample coupled to the measurements.

The Influence Catalyst Layer Thickness on Resistance Contributions of PEMFC Determined by Electrochemical Impedance Spectroscopy

Electrochemical impedance spectroscopy is an important tool for fuel-cell analysis and monitoring. This study focuses on the low-AC frequencies (2–0.1 Hz) to show that the thickness of the catalyst layer significantly influences the overall resistance of the cell. By combining known models, a new equivalent circuit model was generated. The new model is able to simulate the impedance signal in the complete frequency spectrum of 105–10−2 Hz, usually used in experimental work on polymer electrolyte fuel cells (PEMFCs). The model was compared with experimental data and to an older model from the literature for verification. The electrochemical impedance spectra recorded on different MEAs with cathode catalyst layer thicknesses of approx. 5 and 12 µm show the appearance of a third semicircle in the low-frequency region that scales with current density. It has been shown that the ohmic resistance contribution (Rmt) of this third semicircle increases with the catalyst layer’s thickness. Furthermore, the electrolyte resistance is shown to decrease with increasing catalyst-layer thickness. The cause of this phenomenon was identified to be increased water retention by thicker catalyst layers.

Corrosion Behavior of AA2055 Aluminum-Lithium Alloys Anodized in the Presence of Sulfuric Acid Solution

The aim of this work was to evaluate the corrosion behavior of the AA2055 Aluminum-lithium alloy anodized in a sulfuric acid (H2SO4) bath, varying the current density of 0.19 and 1 A·cm−2 and why the sealing solution was water (H2O) and sodium dichromate (Na2Cr2O7). Anodized samples were exposed to a 10 vol.% H2SO4 solution and the electrochemical technique used was electrochemical impedance spectroscopy. Scanning electron microscopy and X-ray photoelectron spectroscopy were employed to characterization of the anodizing layer, determinate morphology and thickness of coatings. The Na2Cr2O7 sealing solution tends to increase the charge transfer resistance and produces a more homogeneous and compact passive oxide layer, and imparts a corrosion inhibition protection to the AA2055. SEM observations indicated that the morphology and thickness of the anodic films formed on AA2055 aluminum-lithium alloy anodized have the best results for both current densities.

Impedance Spectroscopy Dynamics of Biological Neural Elements: From Memristors to Neurons and Synapses

Understanding the operation of neurons and synapses is essential to reproducing biological computation. Building artificial neuromorphic networks opens the door to a new generation of faster and low-energy-consuming electronic circuits for computation. The main candidates to imitate the natural biocomputation processes, such as the generation of action potentials and spiking, are memristors. Generally, the study of the performance of material neuromorphic elements is done by the analysis of time transient signals. Here, we present an analysis of neural systems in the frequency domain by small-amplitude ac impedance spectroscopy. We start from the constitutive equations for the conductance and memory effect, and we derive and classify the impedance spectroscopy spectra. We first provide a general analysis of a memristor and demonstrate that this element can be expressed as a combination of simple parts. In particular, we derive a basic equivalent circuit where the memory effect is represented by an RL branch. We show that this ac model is quite general and describes the inductive/negative capacitance response in many systems such as halide perovskites and organic LEDs. Thereafter, we derive the impedance response of the integrate-and-fire exponential adaptative neuron model that introduces a negative differential resistance and a richer set of spectra. On the basis of these insights, we provide an interpretation of the varied spectra that appear in the more general Hodgkin-Huxley neuron model. Our work provides important criteria to determine the properties that must be found in material realizations of neuronal elements. This approach has the great advantage that the analysis of highly complex phenomena can be based purely on the shape of experimental impedance spectra, avoiding the need for specific modeling of rather involved material processes that produce the required response.

Theory of Hysteresis in Halide Perovskites by Integration of the Equivalent Circuit

Perovskite solar cells show a number of internal electronic-ionic effects that produce hysteresis in the current-voltage curves and a dependence of the temporal response on the conditions of the previous stimulus applied to the sample. There are many models and explanations in the literature, but predictive methods that may lead to an assessment of the solar cell behavior based on independent measurements are needed. Here, we develop a method to predict time domain response starting from the frequency domain response measured by impedance spectroscopy over a collection of steady states. The rationale of the method is to convert the impedance response into a set of differential equations, in which the internal state variables emerge naturally and need not be predefined in terms of a physical (drift/diffusion/interfaces) model. Then, one solves (integrates) the evolution for a required external perturbation such as voltage sweep at a constant rate (cyclic voltammetry). Using this method, we solve two elementary but relevant equivalent circuit models for perovskite solar cells and memristors, and we show the emergence of hysteresis in terms of the relevant time and energy constants that can be fully obtained from impedance spectroscopy. We demonstrate quantitatively a central insight in agreement with many observations: regular hysteresis is capacitive, and inverted hysteresis is inductive. Analysis of several types of perovskite solar cells shows excellent correlation of the type of equivalent circuit and the observed hysteresis. A new phenomenon of transformation from capacitive to inductive hysteresis in the course of the current-voltage curve is reported.

Mechanistic origin and unlocking of negative capacitance in perovskites solar cells

We have unlocked the mechanistic behavior of negative capacitance in perovskite solar cells (PSCs) by analyzing impedance spectra at variable photovoltage and applied bias, temperature-dependent capacitance versus frequency (C-f) spectra, and current-voltage (J-V) characteristics. We noted that p-i-n type PSCs having PEDOT:PSS or PTAA as hole transport layer display negative capacitance feature at low and intermediate frequencies. The activation energies (E_a) for the observance of negative capacitance were found to be in a similar order of magnitude required for the ionic migration. Moreover, the kinetic relaxation time (τ_kin) estimated to be in the same order of magnitude required to activate the halide ion migration. Our investigation suggests that the primary reason for the appearance of negative capacitance in PSCs with a p-i-n configuration is associated with the migration of halide ions and vacancies in the perovskite layers.

•

Negative capacitance in p-i-n device was unraveled from immittance spectroscopy

•

Under external bias, halide ions/vacancies migrate toward HTL/perovskites interface

•

Charge carriers discharge in trap states leading to the negative capacitance

•

In p-i-n devices PTAA-based HTL display improved charge transport compared with PEDOT:PSS

Beyond Impedance Spectroscopy of Perovskite Solar Cells: Insights from the Spectral Correlation of the Electrooptical Frequency Techniques

Small perturbation techniques have proven to be useful tools for the investigation of perovskite solar cells. A correct interpretation of the spectra given by impedance spectroscopy (IS), intensity-modulated photocurrent spectroscopy (IMPS), and intensity-modulated photovoltage spectroscopy (IMVS) is key for the understanding of device operation. The utilization of a correct equivalent circuit to extract real parameters is essential to make this good interpretation. In this work, we present an equivalent circuit, which is able to reproduce the general and the exotic behaviors found in impedance spectra. From the measurements, we demonstrate that the midfrequency features that may appear to depend on the active layer thickness, and we also prove the spectral correlation of the three techniques that has been suggested theoretically.

Negative Capacitance and Inverted Hysteresis: Matching Features in Perovskite Solar Cells

Negative capacitance in the low-frequency domain and inverted hysteresis are familiar features in perovskite solar cells, which origin is still under discussion. Here we use impedance spectroscopy to analyze these responses in methylammonium lead bromide cells treated with lithium cations at the electron-selective layer/perovskite interface and in iodide devices exposed to different relative humidity conditions. Employing the surface polarization model, we obtain a time constant associated with the kinetics of the interaction of ions/vacancies with the surface, τ_kin, in the range of 10⁰-10² s for all the cases exhibiting both features. These interactions lead to a decrease in the overall recombination resistance, modifying the low-frequency perovskite response and yielding a flattening of the cyclic voltammetry. As a consequence of these results we find that negative capacitance and inverted hysteresis lead to a decrease in the fill factor and photovoltage values.

The Durability of an Organic-Inorganic Sol-Gel Interlayer in Al-GFRP-CFRP Laminates in a Saline Environment

The aim of the study was to assess the selected properties of a hybrid organic-inorganic silane sol-gel coating (HSG) used in hybrid fiber metal laminates (FML) in a corrosion environment. The HSG coating on the aluminum alloy was produced using 3M™ AC130-2 formulation consisting of 3-glycidoxypropyl-trimethoxysilane (GPTMS) and tetra-n-propoxyzirconium (zirconium(IV) propoxide) (TPOZ). Laminates consisted of aluminum alloy AA2024-T3 sheets, with carbon fiber reinforced polymers (CFRPs) and a glass fiber reinforced metal-composite structure (GFRP). Potentiodynamic and polarization curve and impedance (EIS) tests were carried out on HSG at ambient temperatures after 1 h and 150 h of soaking. Neutral 0.5 M NaCl and 0.8 M NaCl solutions were used for open circuit potential (OCP) and potentiodynamic tests, and 0.5 NaCl was used for the EIS test. A neutral salt spray (NSS) test was applied to laminates with a 12 week exposure period. The results obtained revealed that the HSG coating did not provide sufficient protection against corrosion of the aluminum alloy in direct contact with an aggressive environment but was effective as an interlayer. Local aluminum sheet perforation did not lead to delamination at the metal-composite interface regardless of the type or configuration of the composite. This confirms the durability of HSG used in FMLs.

Detecting and identifying reversible changes in perovskite solar cells by electrochemical impedance spectroscopy

Reversible changes in perovskite solar cells (PSC) are detected and analysed by electrochemical impedance spectroscopy (EIS).