Enhanced generation of H 2 O 2 and radicals on Co 9 S 8 /partly-graphitized carbon cathode for degradation of bio-refractory organic wastewater

Highly selective electrosynthesis of H2O2 by N, O co-doped graphite nanosheets for efficient electro-Fenton degradation of p-nitrophenol

The activity and selectivity of the cathode towards electrosynthesis of H₂O₂ are critical for electro-Fenton process. Herein, nickel-foam modified with N, O co-doped graphite nanosheets (NO-GNSs/Ni-F) was developed as a cathode for highly efficient and selective electrosynthesis of H₂O₂. Expectedly, the accumulation of H₂O₂ at pH= 3 reached 494.2 mg L^-1 h^-1, with the selectivity toward H₂O₂ generation reaching 93.0%. The synergistic effect of different oxygen-containing functional groups and N species on the performance and selectivity of H₂O₂ electrosynthesis was investigated by density functional theory calculations, and the combination of epoxy and graphitic N (EP + N) was identified as the most favorable configuration with the lowest theoretical overpotential for H₂O₂ generation. Moreover, NO-GNSs/Ni-F was applied in the electro-Fenton process for p-nitrophenol degradation, resulting in 100% removal within 15 min with the kinetic rate constant of 0.446 min^-1 and 97.6% mineralization within 6 h. The efficient removal was mainly attributed to the generation of bulk ·OH. Furthermore, NO-GNSs/Ni-F exhibited excellent stability. This work provides a workable option for the enhancement of H₂O₂ accumulation and the efficient degradation of pollutants in electro-Fenton system.

A Comparative Study of Biomimetic Synthesis of EDOT-Pyrrole and EDOT-Aniline Copolymers by Peroxidase-like Catalysts: Towards Tunable Semiconductive Organic Materials

It has been two decades since biomimetic synthesis of conducting polymers were first reported, however, the systematic investigation of how catalysts influence the properties of the conducting polymers has not been reported yet. In this paper, we report a comparative study between peroxidase-like catalyst, dopants, and their effect on the properties of poly (3,4-ethylenedioxythiophene) (PEDOT), polypyrrole (PPY), and polyaniline (PANI). We also investigate the EDOT-Pyrrole and EDOT-Aniline copolymerization by enzymomimetic synthesis using two catalysts (Ferrocene and Hematin). It was found that, chemically, there are no detectable effects, only having small contributions in molar ratios greater than 0.7–0.3. Spectroscopic data provide solid evidence concerning the effect in the variation of the molar fractions, finding that, as the molar fraction of EDOT decreases, changes associated with loss of the conjugation of the structure and the oxidation state of the chains were observed. The electrical conductivity was considerably modified depending on the type of catalyst. Hematin produces conductive homopolymers and copolymers when doped with p-toluene sulfonic acid (TSA), while ferrocene produces low conductive copolymers under the same conditions. The mole fraction affects conductivity significantly, showing that as the EDOT fraction decreases, the conductivity drops drastically for both EDOT-PY and EDOT-ANI copolymers. The type of dopant also notably affects conductivity; the best values were obtained by doping with TSA, while the lowest were obtained when doping with polystyrene sulfonate (PSS). We also draw a biomimetic route to tailor the fundamental properties of conducting homopolymers and copolymers for their design and scaled-up production, as they have recently been found to have use in a broad range of applications.

Flower-like molybdenum disulfide decorated ZIF-8-derived nitrogen-doped dodecahedral carbon for electro-catalytic degradation of phenol

In this work, flower-like molybdenum disulfide was constructed on the surface of ZIF-8-derived nitrogen-doped dodecahedral carbon (ZNC) for the electrocatalytic degradation of phenol. The flower-like nanostructure of MoS₂@ZNC contributed to the exposure of more edge-active sites of MoS₂. At the same time, Mo⁴⁺ and Mo⁶⁺ co-existed in MoS₂@ZNC, which promoted the generation of H₂O₂ and •OH, and improved the catalytic activity of composite materials. In addition, electrochemical performance analysis showed that MoS₂ loaded on the surface of ZNC significantly improved the redox capacity of the material, and the composite ratio of MoS₂ and ZNC affected the structure and properties of MoS₂@ZNC composites. Moreover, the electrochemical performance of prepared MoS₂@ZNC was evaluated by the generation of hydroxyl (•OH) and the degradation efficiency of phenol. The results showed that MoS₂@ZNC-2 had an excellent phenol degradation efficiency (98.8%) and COD removal efficiency (86.8%) within 120 min. Furthermore, MoS₂@ZNC cathode still maintained good performance after being experimented with 20 times, indicated the excellent stability of MoS₂@ZNC.

Co9S8 nanoparticles-embedded porous carbon: A highly efficient sorbent for mercury capture from nonferrous smelting flue gas

In this study, a novel Co₉S₈ nanoparticles-embedded porous carbon (Co₉S₈-PC) was designed as an effective reusable sorbent for Hg⁰ capture from smelting flue gas. Some flue gas components can create more active sites on Co₉S₈-PC for Hg⁰ adsorption, but compete with Hg⁰ for the same sulfur sites over nano Co_1-xS/Co₃S₄ (CoS) and Co_1-xS/Co₃S₄ embedded porous carbon (CoS-PC), which can be ascribed to the difference in crystal structure between Co₉S₈ and Co_1-xS/Co₃S₄. Therefore, Co₉S₈-PC shows much better Hg⁰ capture ability than CoS and CoS-PC under smelting flue gas. O₂, SO₂ and HCl improve Hg⁰ adsorption on Co₉S₈-PC mainly through creating Co³⁺ site, but H₂O has neglectable effect on Hg⁰ capture. Co₉S₈-PC shows a remarkably large Hg⁰ adsorption capacity of 43.18 mg/g, which is greatly higher than the representative metal sulfides for Hg⁰ removal from smelting flue gas. During Hg⁰ adsorption, Co³⁺ is the primary site to directly interact with Hg⁰, and the adsorbed mercury exists as HgS. Co₉S₈-PC exhibits an excellent recyclability for capturing Hg⁰, which is mainly assigned to the replenishment of consumed Co³⁺ site by O₂, SO₂ and HCl. Therefore, Co₉S₈ nanoparticles-embedded porous carbon is an efficient, sustainable and highly recyclable sorbent for Hg⁰ recovery from smelting flue gas.

Preparation of CeO2-doped carbon nanotubes cathode and its mechanism for advanced treatment of pig farm wastewater

The effluent from conventional treatment process (including anaerobic digestion and anoxic-oxic treatment) for pig farm wastewater was difficult to treat due to its low ratio of biochemical oxygen demand to chemical oxygen demand (BOD₅/COD_Cr) (<0.1). In the present study, electro-Fenton (EF) was used to improve the biodegradability of the mentioned effluent and the properties of self-prepared CeO₂-doped multi-wall carbon nanotubes (MWCNTs) electrodes were also studied. An excellent H₂O₂ production (165 mg L^-1) was recorded, after an 80-min electrolysis, when the mass ratio of MWCNTs, CeO₂ and pore-forming agent (NH₄HCO₃) was 6:1:1. Results of scanning electron microscopy (SEM), transmission electron microscope (TEM) and x-ray photoelectron spectroscopy (XPS) showed that addition of NH₄HCO₃ and the doping of CeO₂ could increase the superficial area of the electrode as well as the oxygen reduction reaction (ORR) electro-catalytic performance. The BOD₅/COD_Cr of the wastewater from the first stage AO process increased from 0.08 to 0.45 and COD_Cr reduced 71.5% after an 80-min electrolysis, with 0.3 mM Fe²⁺ solution. The non-biodegradable chemical pollutants from the first stage AO process were degraded by EF. The non-biodegradable pollutants identified by LC-MS/MS in the effluent from AO process including aminopyrine, oxadixyl and 3-methyl-2-quinoxalinecarboxylic acid could be degraded by EF process, with the removal rates of 81.86%, 34.39% and 7.13% in 80 min, and oxytetracycline with the removal rate of 100% in 20 min. Therefore, electro-Fenton with the new CeO₂-doped MWCNTs cathode electrode will be a promising supplement for advanced treatment of pig farm wastewater.

An Electrochemical Process Comparison of As(III) in Simulated Groundwater at Low Voltage in Mixed and Divided Electrolytic Cells

A relatively low voltage can be favor of e- transfer and peroxide generation from dominant 2e--reduction of O2 on carbon materials as cathode, with low energy loss. In this study the conversion of As(III) in simulated high arsenic groundwater at low voltage was compared in a mixed and a anode–cathode separated electrolytic system. With applied voltages (the potential difference between cathode and anode) from 0.1 V to 0.8 V, As(III) was found to be efficiently converted to As(V) in the mixed electrolytic cells and in separated anodic cells. The complete oxidation of As(III) to As(V) at 0.1–0.8 V was also achieved on graphite in divided cathodic cells which could be long-running. The As(III) conversion process in mixed electrolytic cells, anodic cells and cathodic cells all conformed to the pseudo first-order kinetics equation. The energy consumed by As(III) conversion was decreased as the applied voltage declined. Low voltage electrolysis is of great significance for saving energy consumption and improving the current efficiency and can be applied to in-situ electrochemical pre-oxidation for As(III) in high arsenic groundwater.

Hydrothermal Synthesis of Cobalt Ruthenium Sulfides as Promising Pseudocapacitor Electrode Materials

In this paper, we report the successful synthesis of cobalt ruthenium sulfides by a facile hydrothermal method. The structural aspects of the as-prepared cobalt ruthenium sulfides were characterized using X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy. All the prepared materials exhibited nanocrystal morphology. The electrochemical performance of the ternary metal sulfides was investigated by cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy techniques. Noticeably, the optimized ternary metal sulfide electrode exhibited good specific capacitances of 95 F g−1 at 5 mV s−1 and 75 F g−1 at 1 A g−1, excellent rate capability (48 F g−1 at 5 A g−1), and superior cycling stability (81% capacitance retention after 1000 cycles). Moreover, this electrode demonstrated energy densities of 10.5 and 6.7 Wh kg−1 at power densities of 600 and 3001.5 W kg−1, respectively. These attractive properties endow proposed electrodes with significant potential for high-performance energy storage devices.

Three-Dimensional Hierarchical Porous Carbon Cathode Derived from Waste Tea Leaves for the Electrocatalytic Degradation of Phenol

Tea leaves have been explored as an economically viable and environmentally friendly source of biomass carbon. Tea leaf porous carbon (TPC) with a three-dimensional (3D) structure was prepared by a potassium hydroxide pretreatment and high-temperature calcination method, and the preparation process was simple and self-templating. The prepared TPC has a large specific surface area (1620.05 m² g^-1), three-dimensional multilayer pore structure, uniform pore size, and high oxygen content (15.51%). Both the calcination temperature and the activation level have an effect on the structure and performance of the TPC. The TPC electrode can generate a large amount of hydrogen peroxide in the initial stage of the degradation process, thereby increasing the amount of hydroxyl radicals generated and removing organic pollutants. Therefore, phenol was used to test the degradation effects and evaluate the degradation performance of TPC. Under suitable degradation conditions, TPC-800-2 showed a 95.41% degradation rate after 120 min of degradation, which is superior to that of other calcination temperatures and activation levels. The removal efficiency of chemical oxygen demand after 180 min was 90.0% and showed good stability after being used 20 times. Our work illustrates that a simple, high-performance self-templating synthetic strategy for producing novel 3D-TPC from biomass sources can play a significant role in the actual wastewater treatment of other biomass materials.

Confined Co9S8 into a defective carbon matrix as a bifunctional oxygen electrocatalyst for rechargeable zinc–air batteries

CE-Co₉S₈@N,S-CM shows remarkable performance as a bi-functional electrocatalyst, and shows potential in the practical application of zinc–air batteries.

Preparation of RuO2-TiO2/Nano-graphite composite anode for electrochemical degradation of ceftriaxone sodium

Graphite-like material is widely used for preparing various electrodes for wastewater treatment. To enhance the electrochemical degradation efficiency of Nano-graphite (Nano-G) anode, RuO₂-TiO₂/Nano-G composite anode was prepared through the sol-gel method and hot-press technology. RuO₂-TiO₂/Nano-G composite was characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy and N₂ adsorption-desorption. Results showed that RuO₂, TiO₂ and Nano-G were composited successfully, and RuO₂ and TiO₂ nanoparticles were distributed uniformly on the surface of Nano-G sheet. Specific surface area of RuO₂-TiO₂/Nano-G composite was higher than that of TiO₂/Nano-G composite and Nano-G. Electrochemical performances of RuO₂-TiO₂/Nano-G anode were investigated by cyclic voltammetry, electrochemical impedance spectroscopy. RuO₂-TiO₂/Nano-G anode was applied to electrochemical degradation of ceftriaxone. The generation of hydroxyl radical (OH) was measured. Results demonstrated that RuO₂-TiO₂/Nano-G anode displayed enhanced electrochemical degradation efficiency towards ceftriaxone and yield of OH, which is derived from the synergetic effect between RuO₂, TiO₂ and Nano-G, which enhance the specific surface area, improve the electrochemical oxidation activity and lower the charge transfer resistance. Besides, the possible degradation intermediates and pathways of ceftriaxone sodium were identified. This study may provide a viable and promising prospect for RuO₂-TiO₂/Nano-G anode towards effective electrochemical degradation of antibiotics from wastewater.