Effect of electrochemically-driven technologies on the treatment of endocrine disruptors in synthetic and real urban wastewater

Electrolysis of HTL-AP for nutrient recovery by converting cyclic nitrogen to nitrate-N fertilizer

Valorization of hydrothermal liquefaction aqueous phase (HTL-AP) can be achieved through its use as a nutrient source for lettuce production in hydroponic systems after being treated to reduce the nutrient imbalance. Removing nitrogen cyclic compounds in HTL-AP may impact the availability of some nutrients, such as nitrate-N, that are necessary for plant growth. Previous studies indicate that electrolysis enables nitrate-N accumulation in algal-HTL-AP. In this study, HTL-AP derived from food waste was electrolyzed to convert available nitrogenous compounds into nitrogen forms that are preferred by plants such as nitrate-N. Biochemical properties were assessed for the HTL-AP samples before and after two years of storage. Results from this study show that it is viable to convert heterocyclic amines in HTL-AP into inorganic nitrogen forms such as nitrite-N, nitrate-N, ammonia-N, and fatty acids. Specifically, this study showed that accumulation of 609 mg/L of nitrate-N in the HTL-AP with an initial concentration of 25 mg/L was achieved at the lowest current density. Additionally, electrolysis treatment removed 48%-61% of COD from the HTL-AP at different current densities. Furthermore, water quality characterization before and after storage for two years showed decreased organic matter in the HTL-AP, leading to reduced inorganic nitrogen recovery. Overall, this study indicates that electrolysis can increase the concentration of inorganic nitrogen in the HTL-AP both before and after long-term storage.

The recent development of innovative photoelectro-Fenton processes for the effective and cost-effective remediation of organic pollutants in waters

Wastewaters with toxic and recalcitrant organic contaminants are poorly remediated in conventional wastewater treatment plants. So, powerful processes need to be developed to destroy such organic pollutants to preserve the quality of the aquatic environment. This critical and comprehensive review presents the recent innovative development of photoelectro-Fenton (PEF) covering the period 2019-September 2024. This emerging photo-assisted Fenton-based electrochemical advanced oxidation process (EAOP) is an efficient and cost-effective treatment for water remediation. It possesses a great oxidation power because the in-situ generated hydroxyl radical as oxidant is combined with the photolysis of the organic by-products under UV or sunlight irradiation. The review is initiated by a brief description of the characteristics of the PEF process to stand out in the role of generated oxidizing agents. Further, the homogeneous PEF. PEF-like, solar PEF (SPEF), and SPEF-like processes with iron catalysts are discussed, taking examples of their application to the removal and mineralization of solutions of industrial chemicals, herbicides, dyes, pharmaceuticals, and direct real wastewaters. Novel heterogeneous PEF treatments of such pollutants with solid iron catalysts or functionalized cathodes are analyzed. Finally, novel hybrid processes including PEF/photocatalysis and PEF/photoelectrocatalysis, followed by novel and potent sequential processes like electrocoagulation-PEF and persulfate-PEF, are discussed. Throughout the manuscript, special attention was made to the total operating cost of PEF, which is more expensive than conventional electro-Fenton due to the high electric cost of the UV lamp, pointing to consider the much more cost-effective SPEF as a preferable alternative in practice.

Electrochemical degradation of acetaminophen in urine matrices: Unraveling complexity and implications for realistic treatment strategies

Urine has an intricate composition with high concentrations of organic compounds like urea, creatinine, and uric acid. Urine poses a formidable challenge for advanced effluent treatment processes following urine diversion strategies. Urine matrix complexity is heightened when dealing with pharmaceutical residues like acetaminophen (ACT) and metabolized pharmaceuticals. This work explores ACT degradation in synthetic, fresh real, and hydrolyzed real urines using electrochemical oxidation with a dimensional stable anode (DSA). Analyzing drug concentration (2.5 - 40 mg L-1) over 180 min at various current densities in fresh synthetic effluent revealed a noteworthy 75% removal at 48 mA cm-2. ACT degradation kinetics and that of the other organic components followed a pseudo-first-order reaction. Uric acid degradation competed with ACT degradation, whereas urea and creatinine possessed higher oxidation resistance. Fresh real urine presented the most challenging scenario for the electrochemical process. Whereas, hydrolyzed real urine achieved higher ACT removal than fresh synthetic urine. Carboxylic acids like acetic, tartaric, maleic, and oxalic were detected as main by-products. Inorganic ionic species nitrate, nitrite, and ammonium ions were released to the medium from N-containing organic compounds. These findings underscore the importance of considering urine composition complexities and provide significant advancements in strategies for efficiently addressing trace pharmaceutical contamination.

Insights into electrochemical oxidation of tris(2-butoxyethyl) phosphate (TBOEP) in aquatic media: Degradation performance, mechanisms and toxicity changes of intermediate products

Tris (2-butoxyethyl) phosphate (TBOEP) has gained significant attention due to its widespread presence and potential toxicity in the environment. In this study, the degradation of TBOEP in aquatic media was investigated using electrochemical oxidation technology. The anode Ti/SnO2-Sb/La-PbO2 demonstrated effective degradation performance, with a reaction constant (k) of 0.6927 min-1 and energy consumption of 1.24 kW h/m3 at 10 mA/cm2. CV tests, EPR tests, and quenching experiments confirmed that indirect degradation is the main degradation mechanism and ·OH radicals were the predominant reactive species, accounting for up to 93.8%. The presence of various factors, including Cl-, NO3-, HCO3- and humic acid (HA), inhibited the degradation of TBOEP, with the inhibitory effect dependent on the concentrations. A total of 13 intermediates were identified using UPLC-Orbitrap-MS/MS, and subsequent reactions led to their further degradation. Two main degradation pathways involving bond breaking, hydroxylation, and oxidation were proposed. Both Flow cytometry and the ECOSAR predictive model indicated that the intermediates exhibited lower toxic than the parent compound, resulting in a high detoxification rate of 95.9% for TBOEP. Although the impact of TBOEP on the phylum-level microbial community composition was found to be insignificant, substantial alterations in bacterial abundance were noted when examining the genus level. The dominant genus Methylotenera, representing 17.4% in the control group, decreased to 6.9% in the presence of TBOEP and slightly increased to 8.7% in the 4-min exposure group of degradation products. Electrochemical oxidation demonstrated its effectiveness for the degradation and detoxification of TBOEP in aqueous solutions, while it is essential to consider the potential impact of degradation products on sediment microbial communities.

Riverine antibiotic occurrence and potential ecological risks in a low-urbanized and rural basin of the middle Yangtze River: Socioeconomic, land use, and seasonal effects

This study firstly investigated the effects of season, land use, and socioeconomic on the spatiotemporal changes of riverine antibiotic concentrations in a low urbanized and rural watershed. In the dry and wet seasons, water samples were collected and analyzed for 15 antibiotics. The results indicated that 14 antibiotics, excluding leucomycin, were detected. Monsoon led to significantly lower total antibiotic concentrations in the wet season (22.0ngL^-1) than in the dry season (51.2ngL^-1). Total antibiotic concentrations were dominated by amoxicillin (below limit of detection (<LOD)-34.7ngL^-1)), erythromycin-H₂O (<LOD-14.7ngL^-1), roxithromycin (<LOD-27.9ngL^-1), and trimethoprim (<LOD-6.34ngL^-1). The total antibiotic concentrations were usually higher in the downstream areas of urban land than in the river reaches of forest land and agricultural land. At county or city scales, total antibiotic concentrations in the dry season were significantly correlated with the rural population, public budget, husbandry product and output, effluent volume, fishery product and output, and hospital number, which generally depend on land use in the basin. Amoxicillin poses a high ecological risk to aquatic algae, whereas erythromycin-H₂O, ofloxacin, and norfloxacin pose medium ecological risks. However, trimethoprim poses a medium ecological risk to mollusks. These results provide improved insights into the characteristics of antibiotic occurrence and ecological risks in the waters of low-urbanized and rural areas in China and can be extrapolated worldwide.

Formation of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) in the electrochemical oxidation of polluted waters with pharmaceuticals used against COVID-19

The COVID-19 pandemic has produced a huge impact on our lives, increasing the consumption of certain pharmaceuticals, and with this, contributing to the intensification of their presence in wastewater and in the environment. This situation demands the implementation of efficient remediation technologies, among them, electrochemical oxidation (ELOX) is one the most applied. This work studies the application of ELOX with the aim of eliminate pharmaceuticals used in the fight against COVID-19, assessing its degradation rate, as well as the risk of formation of toxic trace by-products, such as unintentional POPs like polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). To this end, model solutions containing 10 mg L^-1 of dexamethasone (DEX), paracetamol (PAR), amoxicillin (AMX), and sertraline (STR) with two different electrolytes (NaCl and Na₂SO₄) have been evaluated. However, electrochemical systems that contain chloride ions in solution together with PCDD/Fs precursor molecules may lead to the formation of these highly toxic by-products. So, PCDD/Fs were quantified under conditions of complete degradation of the drugs. Furthermore, the presence of PCDD/Fs precursors such as chlorophenols was determined, as well as the role of Cl^-, Cl^• and SO 4 • - radicals in the formation of the by-products and PCDD/Fs. The maximum measured concentration of PCDD/Fs was around 2700 pg L^-1 for the amoxicillin case in NaCl medium. The obtained results emphasise the importance of not underestimating the potential formation of these highly toxic trace by-products, in addition to the correct selection of oxidation processes and operation variables, in order to avoid final higher toxicity in the medium.

Electrochemical oxidation of fipronil pesticide is effective under environmental relevant concentrations

Pesticide overuse has posed a threat to agricultural community as well as for the environment. In order to treat this pollution at its source, decentralized and selective technologies such as electrochemical processes appear especially relevant to avoid the possible generation of toxic degradation products. Electrochemical oxidation (ECO) is a promising electrochemically-driven process, but most studies evaluate performance under pollutant concentrations that are orders of magnitude higher than environmental relevant conditions. This work explores ECO treatment of fipronil using boron-doped diamond (BDD) as anode and titanium plate as cathode at small concentrations found in agricultural run-off. The effect of applied current density and initial contaminant concentrations were also studied. For a current density of 20 mA cm^-2 the decrease of COD and fipronil were about 97% and 100% after 360 min of electrolysis, respectively. Engineering figures of merit were evaluated to assess competitiveness of ECO decentralized propositions. Results suggest effective and feasible treatment of fipronil by ECO.

Decontamination of wastewater containing contaminants of emerging concern by electrooxidation and Fenton-based processes - A review on the relevance of materials and methods

In recent years, there has been an increasingly growing interest regarding the use of electrochemical advanced oxidation processes (EAOPs) which are considered highly promising alternative treatment techniques for addressing environmental issues related to pollutants of emerging concern. In EAOPs, electrogenerated oxidizing agents, such as hydroxyl radical (HO^•), can react non-selectively with a wide range of organic compounds, degrading and mineralizing their structures to unharmful molecules like CO₂, H₂O, and inorganic ions. To this date, a broad spectrum of advanced electrocatalysts have been developed and applied for the treatment of compounds of interest in different matrices, specifically aiming at enhancing the degradation performance. New combined methods have also been employed as alternative treatment techniques targeted at circumventing the major obstacles encountered in Fenton-based processes, such as high costs and energy consumption, which still contribute significantly toward inhibiting the large-scale application of these processes. First, some fundamental aspects of EAOPs will be presented. Further, we will provide an overview of electrode materials which have been recently developed and reported in the literature, highlighting different anode and cathode structures employed in EAOPs, their main advantages and disadvantages, as well as their contribution to the performance of the treatment processes. The influence of operating parameters, such as initial concentrations, pH effect, temperature, supporting electrolyte, and radiation source, on the treatment processes were also studied. Finally, hybrid techniques which have been reported in the literature and critically assess the most recent techniques used for evaluating the degradation efficiency of the treatment processes.

An efficient Fe2+ assisted UV/electrogenerated-chlorine process for carbamazepine degradation: The role of Fe(IV)

To improve the performance and solve the restrictions of UV/chlorine process (e.g., the narrow pH application range and high disinfection by-products (DBPs) formation), a Fe²⁺ assisted advanced oxidation process with electrochemically generated chlorine (UV/E-Cl/Fe²⁺) was proposed for carbamazepine (CBZ) degradation, which eliminated CBZ (5 mg/L) within 4 min under the optimal conditions. Compared with UV/electro-generated chlorine (UV/E-Cl) and anodic oxidation-chlorination/Fe²⁺ (AO-Cl/Fe²⁺) processes, the apparent first-order kinetics constant in UV/E-Cl/Fe²⁺ increased by 2.56 and 3.18 times respectively, and the energy consumption was lower (1.15 kWh/m³-log). Simultaneously, the pH application range could be expanded to 9, and DBPs formed in this process were 17.1% less than those in UV/E-Cl. Through quenching tests, electron paramagnetic resonance (EPR) experiments, measurement of ^•OH concentration, quantification of methyl phenyl sulfoxide (PMSO) and benzosulfone (PMSO₂) and processes comparison, possible CBZ degradation pathways and mechanism of UV/E-Cl/Fe²⁺ were proposed, in which Fe(IV) played the dominant role in the early stage, while the production of radicals (i.e., ^•OH and Cl^•) was enhanced with the increase of chlorine generation, accelerating the CBZ removal. Furthermore, this process demonstrated wide application prospect in treating various contaminants and real wastewaters. In conclusion, this study offers an effective and energy-efficient method for organic pollutants degradation.

Overcoming barriers for nitrate electrochemical reduction: By-passing water hardness

Water matrix composition impacts water treatment performance. However, matrix composition impacts have rarely been studied for electrochemical water treatment processes, and the correlation between the composition and the treatment efficiency is lacking. This work evaluated the electrochemical reduction of nitrate (ERN) using different complex water matrices: groundwater, brackish water, and reverse osmosis (RO) concentrate/brine. The ERN was conducted using a tin (Sn) cathode because of the high selectivity towards nitrogen evolution reported for Sn electrocatalysts. The co-existence of calcium (Ca2+), magnesium (Mg2+), and carbonate (CO32-) ions in water caused a 4-fold decrease in the nitrate conversion into innocuous nitrogen gas due to inorganic scaling formation on the cathode surface. XRF and XRD analysis of fouled catalyst surfaces detected brucite (Mg(OH)2), calcite (CaCO3), and dolomite (CaMg(CO3)2) mineral scales formed on the cathode surface. Surface scaling created a physical barrier on the electrode that decreased the ERN efficiency. Identifying these main sources of ERN inhibition was key to devising potential fouling mitigation strategies. For this reason, the chemical softening pre-treatment of a real brackish water was conducted and this significantly increased nitrate conversion and faradaic efficiency during subsequent ERN treatment, leading to a lower electric energy consumption per order. Understanding the ionic foulant composition responsible for influencing electrochemically-driven technologies are the first steps that must be taken to move towards niche applications such as decentralized ERN. Thus, we propose either direct ERN implementation in regions facing high nitrate levels in soft waters, or a hybrid softening/nitrate removal system for those regions where high nitrate and high-water hardness appear simultaneously.

Highly porous seeding-free boron-doped ultrananocrystalline diamond used as high-performance anode for electrochemical removal of carbaryl from water

Boron-doped diamond (BDD) electrodes are regarded as the most promising catalytic materials that are highly efficient and suitable for application in advanced electrochemical oxidation processes targeted at the removal of recalcitrant contaminants in different water matrices. Improving the synthesis of these electrodes through the enhancement of their morphology, structure and stability has become the goal of the material scientists. The present work reports the use of an ultranano-diamond electrode with a highly porous structure (B-UNCD_WS/TDNT/Ti) for the treatment of water containing carbaryl. The application of the proposed electrode at current density of 75 mA cm^-2 led to the complete removal of the pollutant (carbaryl) from the synthetic medium in 30 min of electrolysis with an electric energy per order of 4.01 kWh m^-3 order^-1. The results obtained from the time-course analysis of the carboxylic acids and nitrogen-based ions present in the solution showed that the concentrations of nitrogen-based ions were within the established maximum levels for human consumption. Under optimal operating conditions, the proposed electrode was successfully employed for the complete removal of carbaryl in real water. Thus, the findings of this study show that the unique, easy-to-prepare BDD-based electrode proposed in this study is a highly efficient tool which has excellent application potential for the removal of recalcitrant pollutants in water.

A critical review on paracetamol removal from different aqueous matrices by Fenton and Fenton-based processes, and their combined methods

Paracetamol (PCT), also known as acetaminophen, is a drug used to treat fever and mild to moderate pain. After consumption by animals and humans, it is excreted through the urine to the sewer systems, wastewater treatment plants, and other aquatic/natural environments. It has been detected in trace amounts in effluents of wastewater plant treatments, sewage sludge, hospital wastewaters, surface waters, and drinking water. PCT can cause genetic code damage, oxidative degradation of lipids, and denaturation of protein in cells, and its toxicity has been well-proven in bacteria, algae, macrophytes, protozoan, and fishes. To avoid its harmful health problems over living beings, powerful Fenton and Fenton-based treatments as pre-eminent advanced oxidation processes (AOPs) have been developed because of the inefficient treatment by conventional treatments. This paper presents a comprehensive and critical review over the application of such Fenton technologies to remove PCT from natural waters, synthetic wastewaters, and real wastewaters. The characteristics and main results obtained using Fenton, photo-Fenton, electro-Fenton, and photoelectro-Fenton are described, making special emphasis in the oxidative action of the generated reactive oxygen species. Hybrid processes based on the coupling with ultrasounds, gamma radiation, photocatalysis, photoelectrocatalysis, zero-valent iron-activated persulfate, adsorption, and microbial fuel cells, are analyzed. Sequential treatments involving the initiation with plasma gliding arc discharge and post-biological process are detailed. Comparative results with other available AOPs are also described and discussed. Finally, 13 aromatic by-products and 9 short-linear aliphatic carboxylic acid detected during the PCT removal by Fenton and Fenton-based processes are reported, with the proposal of three parallel pathways for its initial degradation.

Solar-driven photoelectrocatalytic degradation of anticancer drugs using TiO2 nanotubes decorated with SnS quantum dots

In recent years, the growing interest in applying photoelectrocatalysis (PEC) to decompose organic pollutants has resulted in the need to search for new photoelectrode materials with high activity under visible light radiation. The presented research showed an increased photoelectrocatalytic activity under sunlight of Ti/TiO₂ sensitized with SnS quantum dots, obtained by the successive ionic layer adsorption and reaction (SILAR) method. The presence of SnS caused the enhanced absorption of visible irradiation and the reduction of recombination of generated charges by a p-n heterojunction created with the TiO₂. The highest efficiency of photoelectrocatalytic degradation of anticancer drugs (ifosfamide, 5-fluorouracil, imatinib) was achieved for the SnS-Ti/TiO₂ photoelectrode with a SnS quantum dot size from 4 to 10 nm. In addition, a decrease of IF PEC degradation efficiency was observed with increasing pH and with the presence of Cl^-, NO₃^-, HCO₃^- and organic matter in the treated solution. Studies of the PEC mechanism have shown that drug degradation occurs mainly as a result of the direct and indirect action of photogenerated holes on the SnS-Ti/TiO₂ photoelectrode, and the identified degradation products allowed for the presentation of the degradation pathway of IF, 5-FU and IMB. Duckweed (Lemna minor) growth inhibition tests showed no toxicity of the drug solutions after treatment.

Electrochemical oxidation of ciprofloxacin in different aqueous matrices using synthesized boron-doped micro and nano-diamond anodes

The present work investigates the electrocatalytic performance of two different morphologies of boron doped-diamond film electrode (microcrystalline diamond - MCD, and nanocrystalline diamond - NCD) used in electrochemical oxidation for the removal of the antibiotic ciprofloxacin (CIP). A thorough study was conducted regarding the formation of the MCD and NCD films through the adjustment of methane in CH₄/H₂ gas mixture, and the two films were compared in terms of crystalline structure, apparent doping level, and electrochemical properties. The physicochemical results showed that the NCD film had higher sp² carbon content and greater doping level; this contributed to improvements in its surface roughness, as well as its specific capacitance and charge transfer, which consequently enhanced its electrocatalytic activity in comparison with the MCD. The results obtained from CIP removal and mineralization assays performed in sulfate medium also showed that the NCD was more efficient than the MCD under all the current densities investigated. The effects of CIP concentration and the evolution of the final by-products, including short-chain carboxylic acids and inorganic ions, were also investigated. The electrochemical performance of the NCD was evaluated in different aqueous matrices, including chloride medium, real wastewater and simulated urine. The application of the NCD led to complete or almost complete CIP degradation, regardless of the medium employed. The kinetic constant rates obtained under the different media investigated were as follows: synthetic urine (0.0416 min^-1 - R² = 0.991) < real wastewater (0.0923 min^-1 R² = 0.997) < synthetic matrix containing chloride (0.1992 min^-1 - R² = 0.995); this shows that the pollutant degradation was affected by the type of aqueous matrix and the oxidants that were electrogenerated in situ. The results obtained from the analysis of electrical energy per order (EE/O) showed that the treatment of simulated urine spkiked with required the highest energy consumption, followed by the real effluent and synthetic matrix containing chloride. The present study proves the viability of electrocatalytic nanostructured materials to the treatment of antibiotics in complex matrices.

Preparation of Tin-Antimony anode modified with carbon nanotubes for electrochemical treatment of coking wastewater

To improve the electrocatalytic activity, carbon nanotubes (CNTs) were used to modify a titanium-supported tin-antimony anode (Ti/SnO₂-Sb). Compared to a Ti/SnO₂-Sb anode, the Ti/SnO₂-Sb-CNTs anode exhibited a higher oxygen evolution potential (1.62 V), smaller crystalline volume (71.23 Å³), larger active surface area (0.371 mC cm^-2), lower charge transfer resistance (8.24 Ω), and longer service life (291 h). The CNTs provided the Ti/SnO₂-Sb anode with effective electrocatalytic activity, conductivity and stability. To evaluate its performance, the Ti/SnO₂-Sb-CNTs anode was utilized for the treatment of coking wastewater. The chemical oxygen demand (COD) and total organic carbon (TOC) removal yields of the coking wastewater reached 83.05% and 74.56% under the optimal current density of 25 mA m^-2, Na₂SO₄ concentration of 35 mM, and plate spacing of 10 mm. UV₂₅₄, ultraviolet-visible absorption spectroscopy, excitation-emission matrix spectra spectroscopy, and Fourier-transform infrared spectroscopy analyses showed that the aromatic and nitrogenous compounds in the coking wastewater were degraded. Furthermore, the electrochemical treatment could effectively reduce the toxicity of the coking wastewater. The energy consumption of the coking wastewater treatment was reduced to 396.56 kWh (kg COD)^-1. This study provides a basis engineering application of the electrochemical oxidation of coking wastewater.

Electrochemically-driven regeneration of iron (II) enhances Fenton abatement of pesticide cartap

Cartap is a carbamate insecticide intended to protect crops such as rice, tea, and sugarcane. Cartap in the environment presents a serious threat to non-target organisms through direct exposure or via biomagnification. Electro-assisted Fenton technology taps the potential of Fenton reagents to degrade cartap. Electrochemical reduction of iron accelerates catalyst regeneration. Cartap degradation was first investigated by varying reaction pH, as well as the initial H₂O₂ and Fe²⁺ dosage, followed by optimization studies using central composite design. Parametric results indicate the highest cartap removal of 98.10% was achieved at 1.6 pH, 3.0 mM Fe²⁺_, and 40 mM H₂O₂ at I = 1.0 A and t = 30 min. These results notoriously surpass conventional Fenton that only achieved 53.8% cartap removal under similar conditions. The hybridization of Fenton process through electrochemical regeneration enhances removal and increases degradation kinetic up to a pseudo-first-order rate constant value of 21.30 × 10^-4 s^-1. Effects of coexisting inorganic salts PO₄^3-, NO₃^-, and Cl^- at 1 mM and 10 mM concentrations were investigated. These results demonstrate that Fenton electrification as process intensification alternative can enhance the performance and competitiveness of conventional Fenton by ensuring higher availability of iron catalyst while minimizing sludge production.