Green synthesis of copper oxide nanoparticles using Punica granatum peels extract: Effect on green peach Aphid

Antifungal activity of copper oxide nanoparticles derived from Zizyphus spina leaf extract against Fusarium root rot disease in tomato plants

Incorporating green chemistry concepts into nanotechnology is an important focus area in nanoscience. The demand for green metal oxide nanoparticle production has grown in recent years. The beneficial effects of using nanoparticles in agriculture have already been established. Here, we highlight some potential antifungal properties of Zizyphus spina leaf extract-derived copper oxide nanoparticles (CuO-Zs-NPs), produced with a spherical shape and defined a 13-30 nm particle size. Three different dosages of CuO-Zs-NPs were utilized and showed promising antifungal efficacy in vitro and in vivo against the selected fungal strain of F. solani causes tomato root rot disease, which was molecularly identified with accession number (OP824846). In vivo  results indicated that, for all CuO-Zs-NPs concentrations, a significant reduction in Fusarium root rot disease occurred between 72.0 to 88.6% compared to 80.5% disease severity in the infected control. Although treatments with either the chemical fungicide (Kocide 2000) showed a better disease reduction and incidence with (18.33% and 6.67%) values, respectively, than CuO-Zs-NPs at conc. 50 mg/l, however CuO-Zs-NPs at 250 mg/l conc. showed the highest disease reduction (9.17 ± 2.89%) and lowest disease incidence (4.17 ± 3.80%). On the other hand, CuO-Zs-NPs at varied values elevated the beneficial effects of tomato seedling vigor at the initial stages and plant growth development compared to either treatment with the commercial fungicide or Trichoderma Biocide. Additionally, CuO-Zs-NPs treatments introduced beneficial results for tomato seedling development, with a significant increase in chlorophyll pigments and enzymatic activity for CuO-Zs-NPs treatments. Additionally, treatment with low concentrations of CuO-Zs-NPs led to a rise in the number of mature pollen grains compared to the immature ones.  however the data showed that CuO-Zs-NPs have a unique antifungal mechanism against F. solani, they  subsequently imply that CuO-Zs-NPs might be a useful environmentally friendly controlling agent for the Fusarium root rot disease that affects tomato plants.

Biosynthesis of green CuO@C nanocomposite using Combretum indicum flower extract for organic dye removal: adsorption performance, modeling, and recyclability studies

Water contamination becomes one of the most high-priority environmental concerns, calling for the efficient treatment techniques. Bionanocomposites can be robust adsorbents, but the synthesis requires toxic chemicals or energy consuming and cause the secondary pollution. Green nanocomposites can be biogenically synthesized using the plant extract to end up with a critically safe strategy. Herein, we used the flower extract of Combretum indicum plant as a bio-based reductant and carbonaceous source for the green CuO@C nanocomposite. This green nanoadsorbent obtained a specific surface area of 17.33 m2/g, good crystallinity, and functional group-containing surface, i.e., -OH and -CONH-. We also conducted the optimization of parameters, i.e., concentration, CuO@C dose, pH, time, and temperature, and reached removal efficiencies towards malachite green (MG, 83.23%), Congo red (CR, 84.60%), brilliant blue (BB, 71.39%), and methylene blue (MB, 23.67%). The maximum adsorption capacities were found as ordered, MG (46.387 mg/g) > MB (23.154 mg/g) > BB (22.8 mg/g) > CR dye (11.063 mg/g). Through the intra-particle diffusion kinetic model, MG and BB adsorption endured a three-step process, while CR and MB adsorption was a two-step process. The recyclability of the green CuO@C nanocomposite was three cycles with 67.54% for the final cycle of BB removal. Moreover, the nanoadsorbent displayed a high stability, checked by X-ray diffraction, FT-IR analysis, EDX spectra, and SEM images. It is recommended that the green CuO@C nanocomposite biosynthesized using the Combretum indicum flower extract can be a good alternative for the dye treatment from wastewater.

Fabrication and response optimization of Moringa oleifera-functionalized nanosorbents for the removal of diesel range organics from contaminated water

The purpose of this research is to synthesize environmentally friendly nanosorbents for the novel adsorption of diesel range organics (DRO) from contaminated water. Central composite design (CCD) analysis of response surface methodology (RSM) was employed in a model fitting of the variables predicting the adsorption efficiency of Moringa oleifera-functionalized zerovalent iron particles (ZINPs) for the removal of DRO. The effects of the reaction parameters on the response were screened using 2⁴ factorial designs to determine the statistically significant independent variables. A quadratic model predicting the DRO adsorption efficiency of ZINPs with an F value of 276.84 (p value < 0.0001) was developed. Diagnostic plots show that the predicted values were in excellent agreement with actual experimental values (R² = 0.99). The maximum percentage removal of DRO of 92.6% was achieved after optimization, using the synthesized ZINPs after 8 h of contact between DRO substrates and ZINPs at pH of 8, the temperature of 25 °C, with an adsorbent dosage of 2 g/L and at composite desirability of 1. Characterization of ZINPs revealed the formation of quasi nanospheres and nanocubes with an average particle diameter of 50.9 ± 9.7, a crystallite size of 15.31 nm, a crystallinity index of 32.47% and a pore width of 75.69-88.59 nm. The adsorption equilibrium data modelling of ZINPs for adsorption of DRO was best described by Langmuir isotherm with the maximum monolayer coverage capacity of 7.194 mg/g. The separation factor [Formula: see text], indicated favourable adsorption. The adsorption kinetic data were consistent with pseudo-second-order kinetics indicating probable chemisorption.

Synthesis, biomedical applications, and toxicity of CuO nanoparticles

Versatile nature of copper oxide nanoparticles (CuO NPs) has made them an imperative nanomaterial being employed in nanomedicine. Various physical, chemical, and biological methodologies are in use for the preparation of CuO NPs. The physicochemical and biological properties of CuO NPs are primarily affected by their method of fabrication; therefore, selectivity of a synthetic technique is immensely important that makes these NPs appropriate for a specific biomedical application. The deliberate use of CuO NPs in biomedicine questions their biocompatible nature. For this reason, the present review has been designed to focus on the approaches employed for the synthesis of CuO NPs; their biomedical applications highlighting antimicrobial, anticancer, and antioxidant studies; and most importantly, the in vitro and in vivo toxicity associated with these NPs. This comprehensive overview of CuO NPs is unique and novel as it emphasizes on biomedical applications of CuO NPs along with its toxicological assessments which would be useful in providing core knowledge to researchers working in these domains for planning and conducting futuristic studies. KEY POINTS: • The recent methods for fabrication of CuO nanoparticles have been discussed with emphasis on green synthesis methods for different biomedical approaches. • Antibacterial, antioxidant, anticancer, antiparasitic, antidiabetic, and antiviral properties of CuO nanoparticles have been explained. • In vitro and in vivo toxicological studies of CuO nanoparticles exploited along with their respective mechanisms.

A green and environmental sustainable approach to synthesis the Mn oxide nanomaterial from Punica granatum leaf extracts and its in vitro biological applications

Pathogenic fungal infections in fruit cause economic losses and have deleterious effects on human health globally. Despite the low pH and high water contents of vegetables and fresh, ripened fruits, they are prone to fungal and bacterial diseases. The ever-increasing resistance of phytopathogens toward pesticides, fungicides and bactericides has resulted in substantial threats to plant growth and production in recent years. However, plant-mediated nanoparticles are useful tools for combating parasitic fungi and bacteria. Herein, we synthesized biogenic manganese oxide nanoparticles (MnONPs) from an extract of Punica granatum (P. granatum), and these nanoparticles showed significant antifungal and antibacterial activities. The production of MnONPs from plant extracts was confirmed by infrared spectroscopy (FTIR), X-ray diffraction (XRD) and UV visible spectroscopy (UV). The surface morphology and shape of the nanoparticles were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Using a detached fruit method, the MnONPs were shown to exhibit significant antimicrobial activities against two bacterial strains, E. coli and S. aureus, and against the fungal species P. digitatum. The results revealed that the MnONPs had a minimum antimicrobial activity at 25 µg/mL and a maximum antimicrobial activity at 100 µg/mL against bacterial strains in lemon (citrus). Furthermore, the MnONPs exhibited significant ROS scavenging activity. Finally, inconclusive results from the green-synthesized MnONPs magnified their significant synergetic effects on the shelf life of tomatoes (Lycopercicum esculantum) and indicated that they could be used to counteract the phytopathological effects of postharvest fungal diseases in fruits and vegetables. Overall, this method of MnONPs synthesis is inexpensive, rapid and ecofriendly. MnONPs can be used as potential antimicrobial agents against different microbial species.

New Green Approaches in Nanoparticles Synthesis: An Overview

Nanotechnology is constantly expanding, with nanomaterials being more and more used in common commercial products that define our modern life. Among all types of nanomaterials, nanoparticles (NPs) occupy an important place, considering the great amount that is produced nowadays and the diversity of their applications. Conventional techniques applied to synthesize NPs have some issues that impede them from being appreciated as safe for the environment and health. The alternative to these might be the use of living organisms or biological extracts that can be involved in the green approach synthesis of NPs, a process that is free of harmful chemicals, cost-effective and a low energy consumer. Several factors, including biological reducing agent concentration, initial precursor salt concentration, agitation, reaction time, pH, temperature and light, can influence the characteristics of biologically synthesized NPs. The interdependence between these reaction parameters was not explored, being the main impediment in the implementation of the biological method on an industrial scale. Our aim is to present a brief review that focuses on the current knowledge regarding how the aforementioned factors can control the size and shape of green-synthesized NPs. We also provide an overview of the biomolecules that were found to be suitable for NP synthesis. This work is meant to be a support for researchers who intend to develop new green approaches for the synthesis of NPs.

Biogenic Synthesis of Copper-Based Nanomaterials Using Plant Extracts and Their Applications: Current and Future Directions

Plants have been used for multiple purposes over thousands of years in various applications such as traditional Chinese medicine and Ayurveda. More recently, the special properties of phytochemicals within plant extracts have spurred researchers to pursue interdisciplinary studies uniting nanotechnology and biotechnology. Plant-mediated green synthesis of nanomaterials utilises the phytochemicals in plant extracts to produce nanomaterials. Previous publications have demonstrated that diverse types of nanomaterials can be produced from extracts of numerous plant components. This review aims to cover in detail the use of plant extracts to produce copper (Cu)-based nanomaterials, along with their robust applications. The working principles of plant-mediated Cu-based nanomaterials in biomedical and environmental applications are also addressed. In addition, it discusses potential biotechnological solutions and new applications and research directions concerning plant-mediated Cu-based nanomaterials that are yet to be discovered so as to realise the full potential of the plant-mediated green synthesis of nanomaterials in industrial-scale production and wider applications. This review provides readers with comprehensive information, guidance, and future research directions concerning: (1) plant extraction, (2) plant-mediated synthesis of Cu-based nanomaterials, (3) the applications of plant-mediated Cu-based nanomaterials in biomedical and environmental remediation, and (4) future research directions in this area.

Green synthesis of copper oxide and manganese oxide nanoparticles from watermelon seed shell extract for enhanced photocatalytic reduction of methylene blue

In the current study, copper oxide (CuO) and manganese oxide (MnO) nanoparticles (NPs) were synthesized through a simple, cost-efficient, and green method using watermelon seed shell extract as a stabilizing and reducing agent. The synthesized CuO and MnO NPs were characterized by using scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR) and Ultraviolet spectroscopy (UV). The particle sizes of CuO and MnO NPs were determined to be in the range of 15-97 and 6-51 nm, respectively, by TEM and XRD analysis. The photocatalytic performance of the CuO and MnO NPs used as catalysts were investigated for the photocatalytic reduction of methylene blue in an aqueous solution. In the photocatalytic reduction of methylene blue, sodium borohydride (NaBH₄) was used as the reducing agent. The CuO and MnO NPs were capable to remove 96.58% (in 70 min) and 96.60% (in 140 min) of methylene blue from aqueous media, respectively. Besides, the kinetics of the photocatalytic reaction was investigated by a pseudo-first order model, and the reaction rate coefficient for methylene blue with CuO and MnO NPs were calculated as 0.0426 and 0.0235 min^-1, respectively. The results demonstrated that the synthesized CuO and MnO NPs through the green method were promising catalysts to improve the photocatalytic reduction performance of methylene blue.

Central Composite Design (CCD) for the Optimisation of Ethosomal Gel Formulation of Punica granatum Extract: In Vitro and In Vivo Evaluations

This research manuscript’s objective was to develop the Punica granatum extract ethosome gel. The use of nanotechnology can improve transdermal drug delivery permeation of its major bioactive compound β-sitosterol. The optimised and developed formulations were further studied in vitro and in vivo. The assessment of the anti-inflammatory activity of the gel was performed in Albino rats. Methanolic extract was prepared and developed into an ethosome suspension and an ethosome gel. To optimise the formulation’s response in terms of particle size (nm) and entrapment efficiency (%), the central composite design (CCD) was used in 2² levels. The effects of factors such as lecithin (%) and ethanol (mL) in nine formulations were observed. Characterisation of ethosome gel was performed and the results showed the particle size (516.4 nm) and mean zeta potential (−45.4 mV). Evaluations of the gel formulation were performed. The results were good in terms of pH (7.1), viscosity (32,158 cps), spreadability (31.55 g cm/s), and no grittiness. In an in vitro study, the percentages of β-sitosterol release of ethosome gel (91.83%), suspension (82.74%), and extracts (68.15%) at 279 nm were recorded. The effects of the formulated gel on formalin-induced oedema in Albino rats showed good results in terms of anti-inflammatory activity. The comparative anti-inflammatory activity of Punica granatum extract and gel showed that the gel action was good for their topical application.

Biosynthesis and biophysical elucidation of CuO nanoparticle from Nyctanthes arbor-tristis Linn Leaf

Copper oxide nanoparticles (CuO NPs) synthesis using an environmentally benign approach, as well as their antibacterial properties. Copper sulphate pentahydrate (CuSO₄.5H₂O) of different concentrations (2 mM, 5 mM and 10 mM) and aqueous Nyctanthes arbor-tristis leaf extract were used to make the CuO NPs. The synthesised CuO NPs are characterised by UV-vis spectroscopy, X-ray diffractometer (XRD), Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). UV-vis spectroscopy confirmed the presence of CuO NPs. The functional groups of the active components were identified using the FTIR spectra of the control (leaf extract) and CuO NPs. SEM pictures revealed that the particles were rectangular, truncated triangle and spherical in shape, with sizes ranging between 4.9 nm, 18.4 nm and 23.8 nm determined using X-ray diffraction. The antibacterial activity of the produced CuO NPs was further evaluated using the well diffusion method. By observing inhibition zones around each well, the nanoparticles were revealed to have broad antibacterial action against human pathogenic bacterial strains Escherichia coli and Staphylococcus aureus withs the 7 ± 0.70-mm and 7 ± 0.21-mm inhibitory zone size respectively followed by 08 μg/mL and 2.5 μg/mL MIC respectively. Thus, these outputs concluded that the CuO NPs exhibited miraculous effect and it might be boon towards nanomedical science, pharmaceuticals and health industries. KEY POINTS: • Biosynthesis of CuO nanoparticle • Multifaceted utilization • Broad spectrum antimicrobial activity.

Enhanced photocatalytic activity of novel Canthium coromandelicum leaves based copper oxide nanoparticles for the degradation of textile dyes

The present study focused to synthesize the copper oxide nanoparticles (CuONPs) using novel Canthium coromandelicum leaves in a cost-effective, easy, and sustainable approach. The obtained Canthium coromandelicum-copper oxide nanoparticles (CC-CuONPs) were characterized using UV-Visible spectroscopy, FT-IR analysis, FESEM, HR-TEM imaging, and XRD study. The XRD pattern verified the development of crystalline CC-CuONPs with an average size of 33 nm. The biosynthesized CC-CuONPs were roughly spherical, according to HR-TEM and FESEM analyses. FT-IR research verified the existence of functional groups involved in CC-CuONPs production. Cu and O₂ have high-energy signals of 78.32% and 12.78%, respectively, according to data from EDX. The photocatalytic evaluation showed that synthesized CC-CuONPs have the efficiency of degrading methylene blue (MB) and methyl orange (MO) by 91.32%, 89.35% respectively. The findings showed that biosynthesized CC-CuONPs might effectively remove contaminants in an environmentally acceptable manner.

Green Synthesis of Metal Oxides Semiconductors for Gas Sensing Applications

During recent decades, metal oxide semiconductors (MOS) have sparked more attention in various applications and industries due to their excellent sensing characteristics, thermal stability, abundance, and ease of synthesis. They are reliable and accurate for measuring and monitoring environmentally important toxic gases, such as NO₂, NO, N₂O, H₂S, CO, NH₃, CH₄, SO₂, and CO₂. Compared to other sensing technologies, MOS sensors are lightweight, relatively inexpensive, robust, and have high material sensitivity with fast response times. Green nanotechnology is a developing branch of nanotechnology and aims to decrease the negative effects of the production and application of nanomaterials. For this purpose, organic solvents and chemical reagents are not used to prepare metal nanoparticles. On the contrary, the synthesis of metal or metal oxide nanoparticles is done by microorganisms, either from plant extracts or fungi, yeast, algae, and bacteria. Thus, this review aims at illustrating the possible green synthesis of different metal oxides such as ZnO, TiO₂, CeO₂, SnO₂, In₂O₃, CuO, NiO, WO_3, and Fe₃O₄, as well as metallic nanoparticles doping.

Green Metallic Nanoparticles: Biosynthesis to Applications

Current advancements in nanotechnology and nanoscience have resulted in new nanomaterials, which may pose health and environmental risks. Furthermore, several researchers are working to optimize ecologically friendly procedures for creating metal and metal oxide nanoparticles. The primary goal is to decrease the adverse effects of synthetic processes, their accompanying chemicals, and the resulting complexes. Utilizing various biomaterials for nanoparticle preparation is a beneficial approach in green nanotechnology. Furthermore, using the biological qualities of nature through a variety of activities is an excellent way to achieve this goal. Algae, plants, bacteria, and fungus have been employed to make energy-efficient, low-cost, and nontoxic metallic nanoparticles in the last few decades. Despite the environmental advantages of using green chemistry-based biological synthesis over traditional methods as discussed in this article, there are some unresolved issues such as particle size and shape consistency, reproducibility of the synthesis process, and understanding of the mechanisms involved in producing metallic nanoparticles via biological entities. Consequently, there is a need for further research to analyze and comprehend the real biological synthesis-dependent processes. This is currently an untapped hot research topic that required more investment to properly leverage the green manufacturing of metallic nanoparticles through living entities. The review covers such green methods of synthesizing nanoparticles and their utilization in the scientific world.

Evaluation of Zebrafish Toxicology and Biomedical Potential of Aeromonas hydrophila Mediated Copper Sulfide Nanoparticles

The present study deals with extracellular synthesis and characterization of copper sulfide (CuS) nanoparticles using Aeromonas hydrophila, and the biological applications of the synthesized CuS like antibacterial, anti-inflammatory, and antioxidant activity were reported. Further, the toxicological effects of the CuS were evaluated using zebrafish as an animal model. The primary step of the synthesis was carried out by adding the precursor copper sulfates to the culture supernatant of Aeromonas hydrophila. The UV-visible spectrophotometer was used to characterize the synthesized nanoparticles, and the peak was obtained at 307 nm through the reduction process. Fourier transform infrared spectroscopy (FTIR) was involved to find out the functional groups (carboxylic acid, alcohols, alkanes, and nitro compounds) associated with copper sulfide nanoparticles (CuS-NPs). Atomic force microscopy (AFM) was used to characterize the CuS topographically, and a scanning electron microscope (SEM) revealed about 200 nm sized CuS nanoparticles with agglomerated structures. Overall, the characterized nanoparticles can be considered as a potential candidate with therapeutic proficiencies as antibacterial, antioxidant, and anti-inflammatory mediator/agents.

New frontiers in the plant extract mediated biosynthesis of copper oxide (CuO) nanoparticles and their potential applications: A review

Copper oxide nanoparticles (CuO NPs) are one of the most widely used nanomaterials nowadays. CuO NPs have numerous applications in biological processes, medicine, energy devices, environmental remediation, and industrial fields from nanotechnology. With the increasing concern about the energy crisis and the challenges of chemical and physical approaches for preparing metal NPs, attempts to develop modern alternative chemistry have gotten much attention. Biological approaches that do not produce toxic waste and therefore do not require purification processes have been the subject of numerous studies. Plants may be extremely useful in the study of biogenic metal NP synthesis. This review aims to shed more light on the interactions between plant extracts and CuO NP synthesis. The use of living plants for CuO NPs biosynthesis is a cost-effective and environmentally friendly process. To date, the findings have revealed many aspects of plant physiology and their relationships to the synthesis of NPs. The current state of the art and potential challenges in the green synthesis of CuO NPs are described in this paper. This study found a recent increase in the green synthesis of CuO NPs using various plant extracts. As a result, a thorough explanation of green synthesis and stabilizing agents for CuO NPs made from these green sources is given. Additionally, the multifunctional applications of CuO NPs synthesized with various plant extracts in environmental remediation, sensing, catalytic reduction, photocatalysis, diverse biological activities, energy storage, and several organic transformations such as reduction, coupling, and multicomponent reactions were carefully reviewed. We expect that this review could serve as a useful guide for readers with a general interest in the plant extract mediated biosynthesis of CuO NPs and their potential applications.

Degradation of Toxic Dye Using Phytomediated Copper Nanoparticles and Its Free-Radical Scavenging Potential and Antimicrobial Activity against Environmental Pathogens

The present investigation deals with the green synthesis of copper nanoparticles in an ecofriendly manner using leaf extract of Andrographis paniculata. Green-synthesized copper nanoparticles were studied for their antibacterial, antioxidant, and catalytic activity. The leaves were powdered and extracted with water and added to copper sulphate solution. The reduction of copper ions to nanoparticles was preliminarily identified by the color change of the reaction mixture. The synthesized nanoparticle was characterized by using a UV-Vis Spectrophotometer at a different wavelength with different time intervals. Functional groups available on the surface of the nanoparticle were identified by Fourier transform infrared spectroscopy (FTIR). Surface roughness was characterized by atomic force microscopy (AFM). X-ray diffraction (XRD) analysis showed six distinct intense peaks indicating the crystalline nature of synthesized copper nanoparticles (CuNPs). A scanning electron microscope (SEM) demonstrated polydispersed nanoparticles formed in the reaction process. The antibacterial activity of the nanoparticles was evaluated by an agar well diffusion assay against pathogenic bacteria. The antioxidant activity showed the excellent reduction of DPPH free radicals by nanoparticles. These results confirmed that copper nanoparticles serve as an alternative therapeutic agent over conventional drugs. Moreover, copper nanoparticles were also used to study the effect on the dye degradation process of methyl red and eosin dyes. Copper nanoparticles effectively remove the dyes with high efficiency up to 92% and 95% of methyl red and eosin dye, respectively.

Biosynthesis of Copper Oxide Nanomaterials Using the Seeds of Date Fruits (Phoenix dactylifera L.) and Antibacterial Activity Evaluation

&lt;b&gt;Background and Objective:&lt;/b&gt; Green chemistry approach is a simple, eco-friendly, less toxic, cost-effective and biological method. &lt;i&gt;Phoenix dactylifera &lt;/i&gt;seed extract has been used as a reducing and capping agent for the green synthesis of copper oxide nanomaterials. This approach had forewarned the interest in researching natural waste products to increase the usage of alternative therapies for infectious diseases. The present investigation determined the production of biogenic copper oxide nanomaterials using the seeds of date fruits (&lt;i&gt;Phoenix dactylifera &lt;/i&gt;L.) by green approaches and an eco-friendly process. &lt;b&gt;Materials and Methods:&lt;/b&gt; Extract of seeds of date fruits acted as potential and effective bio capping and reductant agents for bio-synthesis of copper oxide nanoparticles. The properties of biogenic copper oxide nanomaterials were assessed and characterized by the FT-IR, SEM, EDX, XRD and TGA analysis. &lt;b&gt;Results:&lt;/b&gt; All the characterization results were confirming that produced copper oxide nanomaterials are spherical in shape with a size of 30±6 nm. Synthesized copper oxide nanomaterials are highly pure forms and resistant to high temperatures. Further, the antibacterial activity of green synthesized copper oxide nanomaterials against human bacterial pathogens was evaluated by the agar well diffusion method. The maximum zone of inhibition was obtained in &lt;i&gt;E. coli&lt;/i&gt; as compared to the positive control (tetracycline). &lt;b&gt;Conclusion:&lt;/b&gt; The results of the antibacterial assay indicate that biogenic copper oxide nanomaterials should be considered as an antibacterial agent for the treatment and prevention of infectious diseases.

Optimization, Characterization, and Antibacterial Activity of Copper Nanoparticles Synthesized Using Senna didymobotrya Root Extract

The economic burden and high mortality associated with multidrug-resistant bacteria is a major public health concern. Biosynthesized copper nanoparticles (CuNPs) could be a potential alternative to combat bacterial resistance to conventional medicine. This study for the first time aimed at optimizing the synthesis conditions (concentration of copper ions, temperature, and pH) to obtain the smallest size of CuNPs, characterizing and testing the antibacterial efficacy of CuNPs prepared from Senna didymobotrya (S. didymobotrya) roots. Extraction was done by the Soxhlet method using methanol as the solvent. Gas chromatography-mass spectrometry (GC-MS) analysis was performed to identify compounds in S. didymobotrya root extracts. Box–Behnken design was used to obtain optimal synthesis conditions as determined using a particle analyzer. Characterization was done using ultraviolet-visible (UV-Vis), particle size analyzer, X-ray diffraction, zeta potentiometer, and Fourier transform infrared (FT-IR). Bioassay was conducted using the Kirby–Bauer disk diffusion susceptibility test. The major compounds identified by GC-MS in reference to the NIST library were benzoic acid, thymol, N-benzyl-2-phenethylamine, benzaldehyde, vanillin, phenylacetic acid, and benzothiazole. UV-Vis spectrum showed a characteristic peak at 570 nm indicating the formation of CuNPs. The optimum synthesis conditions were temperature of 80°C, pH 3.0, and copper ion concentration of 0.0125 M. The FT-IR spectrum showed absorptions in the range 3500–3400 cm−1 (N-H stretch), 3400–2400 cm−1 (O-H stretch), and 988–830 cm−1 (C-H bend) and peak at 1612 cm−1 (C=C stretch), and 1271 cm−1 (C-O bend). Cu nanoparticle sizes were 5.55–63.60 nm. The zeta potential value was −69.4 mV indicating that they were stable. The biosynthesized nanoparticles exhibited significant antimicrobial activity on Escherichia coli and Staphylococcus aureus with the zone of inhibition diameters of 26.00 ± 0.58 mm and 30.00 ± 0.58 mm compared to amoxicillin clavulanate (standard) with inhibition diameters of 20 ± 0.58 mm and 28.00 ± 0.58 mm, respectively.

Green synthesis, characterization, antioxidant, antibacterial, and photocatalytic activity of Suaeda maritima (L.) Dumort aqueous extract-mediated copper oxide nanoparticles

Background

The aim of this work was to synthesize copper oxide nanoparticles (CuO NPs) utilizing heartwood aqueous extract of Suaeda maritima (L.) Dumort. The synthesis of CuO NPs using green methodology with small size and high stability paved the way to protect the environment by not involving toxic chemicals and environment-friendly methodology for pharmacological and photocatalytic applications. The aqueous areal parts extract of S. maritima (L.) Dumort was used for synthesis, characterization of CuO NPs was studied, and further its antioxidant, antibacterial, and photocatalytic activity for the removal of methylene blue was studied.

Results

The synthesized CuO NPs shows characteristic UV-visible absorption maximum at 282 nm. The FT-IR spectra shows peak at 3640 cm⁻¹ attributed to hydrogen bonded O-H group of poly phenols, alcohols, and N-H of amide. Strong peak at 1122 cm⁻¹ corresponds to C-OH stretch in phenols and alcohols. Peaks at 1467 cm⁻¹ and 1585 cm⁻¹ corresponds to C=C in aromatic compounds. Strong peak at 1749 cm⁻¹ represents the C=O in aldehydes or in keto compounds. Several strong bonds identified in the range of 1088 to 1225 cm⁻¹ representing C-O-C stretch vibrations. The synthesized particles were circular in shape with rough surface morphology and dispersed as clusters with size of 37 nm with metallic content of 73.8%. The synthesized CuO NPs were proved as potent antibacterial and antioxidant activities. The photocatalytic for the removal of methylene blue in aqueous solution was studied and results proved that the CuO NPs were effectively remove the dye up to 86.91% within less time of 75 min. Hence, the CuO NPs synthesized are high efficiency with less particle size and can be used as antioxidant, antibacterial agent, and also applicable for the removal of hazardous methylene blue dye from effluents and can contribute indirectly to clean up the environment.

Conclusions

The investigation reports the eco-friendly, cost-effective method for synthesizing copper oxide nanoparticles from S. maritima extract with biomedical applications.

Application of biosynthesized metal nanoparticles in electrochemical sensors

Recently, the development of eco-friendly, cost-effective and reliable methods for synthesis of metal nanoparticles has drawn a considerable attention. The so-called green synthesis, using mild reaction conditions and natural resources as plant extracts and microorganisms, has established as a convenient, sustainable, cheap and environmentally safe approach for synthesis of a wide range of nanomaterials. Over the past decade, biosynthesis is regarded as an important tool for reducing the harmful effects of traditional nanoparticle synthesis methods commonly used in laboratories and industry. This review emphasizes the significance of biosynthesized metal nanoparticles in the field of electrochemical sensing. There is increasing evidence that green synthesis of nanoparticles provides a new direction in designing of cost-effective, highly sensitive and selective electrode-catalysts applicable in food, clinical and environmental analysis. The article is based on 157 references and provided a detailed overview on the main approaches for green synthesis of metal nanoparticles and their applications in designing of electrochemical sensor devices. Important operational characteristics including sensitivity, dynamic range, limit of detection, as well as data on stability and reproducibility of sensors have also been covered.

Phytosynthesized nanoparticles as a potential cancer therapeutic agent

Plants are the well-known sources for the hyper-accumulation and reduction of metallic ions. Analysis of various plant extracts has justified the presence of different types of phytochemicals that possess the stabilization and reduction functionalities of precursors to form nanoparticles. Such characteristics make plants as an attractive source for synthesizing eco-friendly nanoparticles (NPs) with potentially less toxicity to the body. Recently, phytosynthesized nanoparticles have been explored for targeted inhibition and diagnosis of cancer cells without affecting non-cancerous healthy cells. The aim of this review is to discuss the characteristic performance of NPs synthesized from various plant sources for the diagnosis and inhibition of cancer. The mode of action of phytosynthesized nanoparticles for anti-cancer applications are also discussed.

Algae-meditated route to cuprous oxide (Cu2O) nanoparticle: differential expression profile of MALAT1 and GAS5 LncRNAs and cytotoxic effect in human breast cancer

Background

Breast cancer (BC), as the most widely recognized disease in women worldwide, represents about 30% of all cancers impacting women. This study was aimed to synthesize Cu2O nanoparticles from the cystoseira myrica algae (CM-Cu2O NPs) assess their antimicrobial activity against pathogenic bacteria and fungi. We evaluated the expression levels of lncRNAs (MALAT1 and GAS5) and apoptosis genes (p53, p27, bax, bcl2 and caspase3), their prognostic roles.

Methods

In this study, CM-Cu2O NPs synthesized by cystoseira myrica algae extraction used to evaluate its cytotoxicity and apoptotic properties on MDA-MB-231, SKBR3 and T-47D BC cell lines compared to HDF control cell line. The CM-Cu2O NPs was characterized by UV–Vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Transmission electron microscopy (TEM) and Scanning electron microscopy (SEM). The antimicrobial activity of CM-Cu2O NPs was assessed against pathogenic bacteria, staphylococcus aureus (S. aureus) PTCC 1112 bacteria as a standard gram-positive bacteria and pseudomonas aeruginosa (P. aeruginosa) PTCC 1310 as a standard gram-negative bacterium. Expression profile of MALAT1 and GAS5 lncRNAs and apoptosis genes, i.e., p27, bax, bcl2 and caspase3 genes, were calculated utilizing qRT-PCR. The changes in the expression levels were determined using the DDCT method.

Results

MALAT1 was upregulated in MDA-MB-231, SKBR3 and T-47D BC (p < 0.01), while GAS5 was downregulated in SKBR3 and T-47D cell lines tested compared with HDF control cell line (p < 0.05) was found. The results revealed that, p27, bax and caspase3 were significantly upregulated in BC cell lines as compared with normal cell line. Bcl2 expression was also significantly increased in MDA-MB-231 and T47D cell lines compared with normal cell line, but bcl2 levels were downregulated in SKBR3 cell line.

Conclusions

Our results confirm the beneficial cytotoxic effects of green-synthesized CM-Cu2O NPs on BC cell lines. This nanoparticle decreased angiogenesis and induces apoptosis, so we conclude that CM-Cu2O NPs can be used as a supplemental drug in cancer treatments. Significantly, elevated circulating lncRNAs were demonstrated to be BC specific and could differentiate BC cell lines from the normal cell lines. It was demonstrated that lncRNAs used in this study and their expression profiles can be created as biomarkers for early diagnosis and prognosis of BC. Further studies utilizing patients would give recognizable identification of lncRNAs as key players in intercellular interactions.

Andean Sacha Inchi (Plukenetia Volubilis L.) Leaf-Mediated Synthesis of Cu2O Nanoparticles: A Low-Cost Approach

In this work, Andean sacha inchi (Plukenetia volubilis L.) leaves were used to prepare monodispersed cuprous oxide (Cu2O) nanoparticles under heating. Visual color changes and UV-visible spectroscopy of colloidal nanoparticles showed λmax at 255 nm, revealing the formation of copper oxide nanoparticles. Transmission electron microscopy and dynamic light scattering analysis indicated that the prepared nanoparticles were spherical with an average size of 6-10 nm. The semi-crystalline nature and Cu2O phase of as-prepared nanoparticles were examined by X-ray diffraction. Fourier-transform infrared spectroscopy confirmed the presence of polyphenols, alkaloids and sugar in the sacha inchi leaf, allowing the formation of Cu2O nanoparticles from Cu2+. Additionally, as-synthesized Cu2O nanoparticles exhibited good photocatalytic degradation activity against methylene blue (>78%, 150 min) with rate constant 0.0219106 min-1. The results suggested that the adopted method is low-cost, simple, ecofriendly and highly selective for the synthesis of small Cu2O nanoparticles and may be used as a nanocatalyst in the future in the efficient treatment of organic pollutants in water.

Biogenic synthesis of copper oxide nanoparticles using plant extract and its prodigious potential for photocatalytic degradation of dyes

The development of benign and efficient approaches for treating industrial grade toxic organic dyes is an ongoing challenge. To this end, copper oxide nanoparticles (CuO NPs) were prepared by a simple, environment friendly, and economical green synthesis procedure by using Psidium guajava leaf extract as reducing agent (i.e., for the reduction of metal salt) as well as capping agent and copper acetate monohydrate as metal salt. The formation of mono-dispersed and spherical (average size 2-6 nm with BET surface area 52.6 m²/g) CuO NPs was confirmed by various spectroscopic and microscopic techniques. The CuO NPs exhibited excellent degradation efficiency for the industrial dyes, i.e., Nile blue (NB) (93% removal in 120 min) and reactive yellow 160 (RY160) (81% removal in 120 min) with apparent rate constants of 0.023 and 0.014 min^-1, respectively. The CuO catalyst was found to be reusable for photocatalytic dye degradation even after five consecutive cycles. The limit of detection (LOD) values for NB and RY160 were 4 and 9 mg/L, respectively. In light of their high reusability and photocatalytic efficiency along with adaptability to green synthesis, the use of biogenic CuO NPs is a promising option for the purification of water resources contaminated with industrial dye.

Green synthesis of copper oxide nanoparticles and mosquito larvicidal activity against dengue, zika and chikungunya causing vector Aedes aegypti

In the present study, high purity copper oxide nanoparticles (NPs) were synthesised using Tridax procumbens leaf extract. Green syntheses of nano-mosquitocides rely on plant compounds as reducing and stabilising agents. Copper oxide NPs were characterised using X-ray diffraction (XRD) analysis, Fourier transform infrared (FT-IR), Field-emission scanning electron microscopy with energy dispersive spectroscopy, Ultraviolet-visible spectrophotometry and fluorescence spectroscopy. XRD studies of the NPs indicate crystalline nature which was perfectly matching with a monoclinic structure of bulk CuO with an average crystallite size of 16 nm. Formation of copper oxide NPs was confirmed by FT-IR studies and photoluminescence spectra with emission peaks at 331, 411 and 433 nm were assigned to a near-band-edge emission band of CuO in the UV, violet and blue region. Gas chromatography-mass spectrometry studies inferred the phytochemical constituents of the leaf extract. Larvicidal activity of synthesised NPs using T. procumbens leaf extract was tested against Aedes aegypti species (dengue, chikungunya, zika and yellow fever transmit vector).

Copper Oxide Nanomaterials Derived from Zanthoxylum armatum DC. and Berberis lycium Royle Plant Species: Characterization, Assessment of Free Radical Scavenging and Antibacterial Activity

Copper oxide nanomaterials were synthesized by a facile sustainable biological method using two plant species (Zanthoxylum armatum DC. and Berberis lycium Royle). The formation of materials was confirmed by FT-IR, ATR, UV-visible, XRD, TEM, SEM, EDX, TGA and PL. The antibacterial activity was evaluated by agar well diffusion method to ascertain the efficacy of plant species extract and extract derived copper oxide nanomaterials against six Gram-positive bacteria namely Staphylococcus aureus, Streptococcus mutans, Streptococcus pyogenes, Corynebacterium diphtheriae, Corynebacterium xerosis, Bacillus cereus and four Gram-negative bacteria such as Klebsiella pneumonia, Escherichia coli, Pseudomonas aeruginosa and Proteus vulgaris against the standard drug, Ciprofloxacin for Gram-positive and Gentamicin for Gram-negative bacteria, respectively. In both cases, copper oxide nanomaterials were found to be sensitive in all the bacterial species. Sensitivity of copper oxide nanomaterials shows an be higher as compared to plant species extract against different bacteria. Scavenging activity of plant extracts along with nanomaterials have been accessed using previously reported protocols employing ascorbic acid as standard. Scavenging activity of copper oxide nanomaterials shows an increase with increase in concentration. The biological activity (bactericidal and scavenging efficiency) of plant derived copper oxide nanomaterials revealed that these materials can be used as potent antimicrobial agent and DPPH scavengers in industrial as well as pharmacological fields.

CuO/C nanocomposite: Synthesis and optimization using sucrose as carbon source and its antifungal activity

The synthesis of bioactive CuO/C nano composite using sucrose as a capping agent is achieved through simple green approach via Response Surface Methodology. The synthesis process was done in a green environment which prevents aggregation of sucrose and promotes nanoparticles formation. The innovative approach produces sucrose as a carbon source mediated copper oxide nanocomposites (CuO/C nanocomposite) with the particle size of 50 nm. Additionally, the produced CuO/C nanocomposite were characterized using microscopic techniques like SEM, TEM and spectroscopic techniques like UV-vis and X-ray diffraction. The antifungal activities of CuO/C nanocomposite were tested against Aspergillus niger and Aspergillus flavus species. At 1000 ppm of CuO/C nanocomposite, it showed 70% restraint on A. flavus and 90% hindrance on A. niger. The fungal inhibition mechanism of bioactive CuO/C nanocomposite was discussed in this research article. The particular high antifungal performance of CuO/C nanocomposite was found against Aspergillus niger while compare to Aspergillus flavus fungal strain.