Identification of avobenzone by-products formed by various disinfectants in different types of swimming pool waters

Adverse Effects of Avobenzone on Boar Sperm Function: Disruption of Protein Kinase A Activity and Tyrosine Phosphorylation

Avobenzone (AVO), an ultraviolet (UV) filter, is frequently used as an ingredient in personal cosmetics. This UV filter has been found to be easily exposed in swimming pools and beaches, and it has been detected in human urine and blood. Moreover, numerous studies have demonstrated that AVO exhibits endocrine-disrupting properties. Nevertheless, the effects of AVO on male fertility have not yet fully understood. Therefore, this study aimed to assess the effects of AVO on various sperm functions during capacitation. First, boar spermatozoa were treated with various AVO concentrations. After treatment, sperm motility and kinetic characteristics, capacitation status, intracellular adenosine triphosphate (ATP) levels, and sperm viability were evaluated. Moreover, Western blot analysis w.as conducted to evaluate protein kinase A (PKA) activity and tyrosine phosphorylation. As a result, AVO treatment significantly decreased total motility, progressive motility, and several kinetic characteristics at high concentrations (50 and 100 μM). Furthermore, the capacitation status dose-dependently decreased. Conversely, no significant differences in acrosome reaction, cell viability, and intracellular ATP levels were observed. However, the intracellular ATP level tended to decrease. In addition, AVO dose-dependently induced abnormal changes in PKA activity and tyrosine phosphorylation. Although AVO did not directly exert a toxic effect on cell viability, it ultimately negatively affected sperm functions through abnormal alterations in PKA activity and tyrosine phosphorylation. Thus, the potential implications on male fertility must be considered when contemplating the safe utilization of AVO.

Hybrid radical coupling during MnO2-mediated transformation of a mixture of organic UV filters: Chemistry and toxicity assessment

Manganese oxide (MnO2) is one of the most abundant metal oxides, and it is renowned for its ability to degrade various phenolic micropollutants. However, under MnO2-mediated transformation, BP-3 transforms into 12 different radical-coupled transformation products (TPs) out of 15 identified TPs. These radical-coupled TPs are reported with adverse environmental impacts. This study explored the effects of MnO2 on organic UV filter mixtures and different water constituents (i.e., bicarbonate ion (HCO3-), humic acid (HA) and halide ions) in terms of degradation efficiency and transformation chemistry. When a mixture of benzophenone-3 (BP-3) and avobenzone (AVO) underwent transformation by MnO2, hybrid radical-coupled TPs derived from both organic UV filters were generated. These hybrid radical-coupled TPs were evaluated by an in silico prediction tool and Vibrio fischeri bioluminescence inhibition assay (VFBIA). Results showed that these TPs were potentially toxic to aquatic organisms, even more so than their parent compounds. The higher the concentration of HCO3-, HA, chloride ion (Cl-) and bromide ion (Br-), the greater the reduction in the efficiencies of degrading BP-3 and AVO. Contrastingly, in the presence of iodide ion (I-), degradation efficiencies of BP-3 and AVO were enhanced; however, iodinated TPs and iodinated radical-coupled TPs were formed, with questionable toxicity. This study has revealed the environmental risks of hybrid radical-coupled TPs, iodinated TPs and iodinated radical-coupled TPs when the organic UV filters BP-3 and AVO are transformed by MnO2.

N-dealkylation of amines during water disinfection - Revealing a new direction in the formation of disinfection by-products

Among numerous disinfection by-products (DBP) forming during aqueous chlorination nitrogen containing species are of special concern due to their toxicological properties. Nevertheless, corresponding reaction products of these natural and anthropogenic compounds are not sufficiently studied so far. An interesting reaction involves dealkylation of the substituted amine moiety. Here we present the results of the comparative study of one-electron oxidation and aqueous chlorination of several aliphatic and aromatic amines. The reaction products were reliably identified with gas chromatography - high resolution mass spectrometry (GC-HRMS), high pressure liquid chromatography - electrospray ionization high resolution mass spectrometry HPLC-ESI/HRMS), and electrochemistry - electrospray ionization high resolution mass spectrometry (EC-ESI/HRMS). Certain similarities dealing with the formation of the corresponding aldehydes and substitution of alkyl groups at the nitrogen atom for hydrogen were shown for the studied processes. The mechanism of the substituted amines' aqueous chlorination involving one-electron oxidation is proposed and confirmed by the array of the observed reaction products. Alternative reactions taking place in conditions of aqueous chlorination, i.e. aromatic electrophilic substitution, may successfully compete with dealkylation and produce major products.

Guidance document on the impact of water treatment processes on residues of active substances or their metabolites in water abstracted for the production of drinking water

This guidance document provides a tiered framework for risk assessors and facilitates risk managers in making decisions concerning the approval of active substances (AS) that are chemicals in plant protection products (PPPs) and biocidal products, and authorisation of the products. Based on the approaches presented in this document, a conclusion can be drawn on the impact of water treatment processes on residues of the AS or its metabolites in surface water and/or groundwater abstracted for the production of drinking water, i.e. the formation of transformation products (TPs). This guidance enables the identification of actual public health concerns from exposure to harmful compounds generated during the processing of water for the production of drinking water, and it focuses on water treatment methods commonly used in the European Union (EU). The tiered framework determines whether residues from PPP use or residues from biocidal product use can be present in water at water abstraction locations. Approaches, including experimental methods, are described that can be used to assess whether harmful TPs may form during water treatment and, if so, how to assess the impact of exposure to these water treatment TPs (tTPs) and other residues including environmental TPs (eTPs) on human and domesticated animal health through the consumption of TPs via drinking water. The types of studies or information that would be required are described while avoiding vertebrate testing as much as possible. The framework integrates the use of weight-of-evidence and, when possible alternative (new approach) methods to avoid as far as possible the need for additional testing.

Advances and research needs for disinfection byproducts control strategies in swimming pools

The control of disinfection byproducts (DBPs) in swimming pools is of great significance due to the non-negligible toxicity and widespread existence of DBPs. However, the management of DBPs remains challenging as the removal and regulation of DBPs is a multifactorial phenomenon in pools. This study summarized recent studies on the removal and regulation of DBPs, and further proposed some research needs. Specifically, the removal of DBPs was divided into the direct removal of the generated DBPs and the indirect removal by inhibiting DBP formation. Inhibiting DBP formation seems to be the more effective and economically practical strategy, which can be achieved mainly by reducing precursors, improving disinfection technology, and optimizing water quality parameters. Alternative disinfection technologies to chlorine disinfection have attracted increasing attention, while their applicability in pools requires further investigation. The regulation of DBPs was discussed in terms of improving the standards on DBPs and their preccursors. The development of online monitoring technology for DBPs is essential for implementing the standard. Overall, this study makes a significant contribution to the control of DBPs in pool water by updating the latest research advances and providing detailed perspectives.

Occurrence, potential sources, and risk assessment of pharmaceuticals and personal care products in atmospheric particulate matter in Hanoi, Vietnam

Pharmaceutical and personal care products (PCPPs) were recently recognized as emerging pollutants due to their potential for adverse health and environmental impacts. One potential route of exposure, atmospheric particulate matter (APM), for polar PPCP chemicals has to date received limited attention. This study screened for 190 polar PPCP chemicals in outdoor APM samples collected from two locations in Hanoi, Vietnam, and predictions of source and potential effects on human health are presented. Day and night, as well as dry and rainy seasonal samples, were taken, and samples screened by LC-TOF, using sequential window acquisition and all theoretical fragment ion spectra method. Eleven PPCP chemicals were detected above the LOD and in more than one sample. The ∑11PPCP chemicals ranged from 0.61 to 21.9 ng m^-3 (median 2.07 ng m^-3), with between 2 and 6 compounds identified in individual samples (median 4). The ∑11PPCP chemicals collected near a heavy traffic area was greater than that in a populated residential zone. Night concentrations were significantly greater than day in both dry and rainy seasons (p < 0.05). Butyl methoxydibenzoylmethane, benzophenone-3, acetaminophen, cotinine, and fluorescent brightener 71 were detected in > 50% of samples. These are typically found in sunscreens, cosmetics, antipyretics, tobacco, and dyes. The DI_air, hazard quotient (HQ), and hazard index (HI) for adults and children at sampling sites were estimated. The HQ for both adults and children were orders of magnitude less than the risk or were close to or whichever. APM does appear to be a potential additional secondary exposure source of PPCP chemicals to the environment and more work is needed to identify if sources are local or ubiquitous and if there is a greater health risk.

Environmental photochemistry of organic UV filter butyl methoxydibenzoylmethane: Implications for photochemical fate in surface waters

With the widespread use of sunscreen and other personal care products, organic ultraviolet filters (OUVFs) have become widely detected in the aquatic environment. Direct and indirect photolysis are important transformation pathways of OUVFs in aquatic environments, so their transformation products (TPs) are also chemicals of concern. Butyl methoxydibenzoylmethane (BMDBM) is one of the most commonly used OUVFs worldwide due to its ability to absorb ultraviolet light across a wide range of wavelengths, and it is ubiquitously detected in aquatic environments. In this study, we investigated the photodegradation of BMDBM through direct photolysis and hydroxyl radical (•OH) photooxidation. TPs were identified using ultrahigh performance liquid chromatography-high resolution mass spectrometry, and reaction mechanisms were proposed. Our results showed that the photodegradation rates for both enol and keto tautomer forms of BMDBM during direct photolysis and •OH photooxidation were similar. The formation of TPs resulted from α-cleavage and decarbonylation reactions involving the keto form of BMDBM. Comparisons of the kinetic data and TPs revealed that the direct photolysis mechanism was a significant sink for BMDBM even during •OH photooxidation. Evaluations of environmental properties based on the predicted physicochemical properties of BMDBM and TPs suggests that some of the TPs will have higher mobility than BMDBM. The quantitative structure-activity relationship (QSAR) approach was used to evaluate the ecotoxicity of BMDBM and the identified TPs. Most TPs were found to be less ecotoxic than BMDBM; however, TPs that had a diphenyl ring structure could be more ecotoxic than BMDBM. Overall, this study provides new insights into the photochemical behavior and ecotoxicity of BMDBM and its TPs, which are important for assessing the fate, persistence, accumulation, and adverse impacts of these compounds in aquatic environments.

Environmental Fate of Organic Sunscreens during Water Disinfection Processes: The Formation of Degradation By-Products and Their Toxicological Profiles

The development of any commercial product should also be aimed at reducing the risk associated with it, according to the safe-by-design concept; that is, risk assessment should always be at the center of the design, and the impact on human and environmental health should be assessed and eliminated during the product development phase and not afterwards. Unfortunately, even today, most operators in any production sector implement the philosophy of “risk management” or rather of managing the problem when it occurs, using spot interventions instead of changing the approach. This argument is also valid in the production of solar filters, which have reached a satisfactory degree of efficiency in the face of a substantial underestimation of the risks associated with their possible environmental fate. In fact, solar filters have been found in bathing waters and their environmental fate may depend on various factors such as the pH of the water, the presence of organic material, metal ions and light, and, above all, the chemical agents used in the disinfection of the water itself. Thus, during disinfection processes, the generation of dozens of products with a lower molecular weight and generally of an aromatic nature has been tested, where some of them did not receive an exact structural definition and a precise evaluation of their precise toxicological profile. Therefore, it is interesting to draw a complete picture of organic sunscreens and of the byproducts obtained under different conditions and their related ecotoxicological profile.

Aqueous Chlorination of D-Limonene

Limonene (1-methyl-4-(1-methylethenyl)-cyclohexene) is one of the most widespread monocyclic terpenes, being both a natural and industrial compound. It is widely present in the environment, including in water supplies. Therefore, it may be subjected to aqueous chlorination at water treatment stations during drinking water preparation. Besides, being a component of numerous body care and cosmetic products, it may present at high levels in swimming pool waters and could also be subjected to aqueous chlorination. Laboratory experiments with aqueous chlorination of D-limonene demonstrated the prevalence of the conjugated electrophilic addition of HOCl molecule to the double bonds of the parent molecule as the primary reaction. The reaction obeys the Markovnikov rule, as the levels of the corresponding products were higher than those of the alternative ones. Fragmentation pattern in conditions of electron ionization enabled the assigning of the structures for four primary products. The major products of the chlorination are formed by the addition of two HOCl molecules to limonene. The reactions of electrophilic addition are usually accompanied by the reactions of elimination. Thus, the loss of water molecules from the products of various generations results in the reproduction of the double bond, which immediately reacts further. Thus, a cascade of addition-elimination reactions brings the most various isomeric polychlorinated species. At a ratio of limonene/active chlorine higher than 1:10, the final products of aqueous chlorination (haloforms) start forming, while brominated haloforms represent a notable portion of these products due to the presence of bromine impurities in the used NaOCl. It is worth mentioning that the bulk products of aqueous chlorination are less toxic in the bioluminescence test on V. fischeri than the parent limonene.

Halogen substitution reactions of halobenzenes during water disinfection

Although being successfully applied all over the world for more than 100 years water disinfection by means of chlorination possesses certain drawbacks, first of all formation of hazardous disinfection by-products (DBP). Aromatic halogenated DBPs significantly contribute to the total organic halogen and developmental toxicity of chlorinated water. The present study deals with investigation of possible substitution of one halogen for another in aromatic substrates in conditions of aqueous chlorination/bromination. The reaction showed high yields especially in case of substrates with proper position of an activating group in the aromatic ring. Thus, ipso-substitution of iodine by chlorine is the main process of aqueous chlorination of para-iodoanisole. Oxidation of the eliminating I⁺ ions into non-reactive IO₃^- species facilitates the substitution. Oxidation of eliminating Br⁺ is not so easy while being highly reactive it attacks initial substrates forming polybrominated products. Substitution of iodine and bromine by chlorine may also involve migration of electrophilic species inside the aromatic ring resulting in larger number of isomeric DBPs. Substitution of chlorine by bromine in aromatic substrates during aqueous bromination is not so pronounced as substitution of bromine by chlorine in aqueous chlorination due to higher electronegativity of chlorine atom. However, formation of some chlorine-free polybrominated products proves possibility of that process.

Transformation of Organic Compounds during Water Chlorination/Bromination: Formation Pathways for Disinfection By-Products (A Review)

The purity of drinking water is an important issue of the human life quality. Water disinfection has saved millions people from the diseases spread with water. However, that procedure has a certain drawback due to formation of toxic organic disinfection products. Establishing the structures of these products and the mechanisms of their formation and diminishing their levels in drinking water represent an important task for chemistry and medicine, while mass spectrometry is the most efficient tool for the corresponding studies. The current review throws light upon natural and anthropogenic sources of the formation of disinfection by-products (DBPs) and the mechanisms of their formation related to the structural peculiarities and the presence of functional groups. In addition to chlorination, bromination is discussed since it is used quite often as an alternative method of disinfection, particularly, for the purification of swimming pool water. The benefits of the contemporary GC/MS and LC/MS methods for the elucidation of DBP structures and study of the mechanisms of their formation are discussed. The reactions characteristic for various functional groups and directions of transformation of certain classes of organic compounds in conditions of aqueous chlorination/bromination are also covered in the review.

Analyzing the Photoprotection Efficiency of Sunscreens Containing Antioxidants under Disinfection Conditions

Sunscreens ensure thorough protection against sunburn. The delivery of UV filters into the stratum corneum and viable epidermis could be reduced by the use of antioxidants (such as β-carotene and trans-resveratrol, alone or combined). The presence/absence of antioxidants (trans-resveratrol and β-carotene) in formulations containing benzophenone-3 (UV-filter) and their efficiency under disinfection and neutral conditions are studied and compared. The trial was conducted on 38 people. The prepared ointments were applied to the participants’ forearms, irradiated and monitored by reflectance colorimetry after 0, 4, 6, and 8 min. Descriptive statistics were used to describe the skin color’s main characteristics and the F-ratio was used to test overall differences. The ointments containing antioxidants and benzophenone-3 were the most efficient, followed by those with benzophenone-3 alone. It was proven that photoprotection with benzophenone-3 is still effective, despite the formation of its chlorinated products. Due to the short time of exposure to disinfecting conditions, it could be assumed that benzophenone-3 was only partially chlorinated. This clinical study demonstrated that formulations containing antioxidants are likely to be more suitable for protecting skin against UVB irradiation than a UV filter alone.

Ethylhexyl methoxycinnamate and butyl methoxydibenzoylmethane: Toxicological effects on marine biota and human concerns

Ethylhexyl methoxycinnamate (EHMC) (CAS number: 5466-77-3) and butyl methoxydibenzoylmethane (BMDM) (CAS number: 70356-09-1) are important sunscreens. However, frequent application of large amounts of these compounds may reflect serious environmental impact, once it enters the environment through indirect release via wastewater treatment or immediate release during water activities. In this article, we reviewed the toxicological effects of EHMC and BMDM on aquatic ecosystems and the human consequences. According to the literature, EHMC and BMDM have been detected in water samples and sediments worldwide. Consequently, these compounds are also present in several marine organisms like fish, invertebrates, coral reefs, marine mammals, and other species, due to its bioaccumulation potential. Studies show that these chemicals are capable of damaging the aquatic beings in different ways. Further, bioaccumulation studies have shown that EHMC biomagnifies through trophic levels, which makes human seafood consumption a concern because the higher position in the trophic chain, the more elevate levels of ultraviolet (UV) filters are detected, and it is established that EHMC present adverse effects on the human organism. In contrast, there are no studies on the BMDM bioaccumulation and biomagnification potential. Different strategies can be adopted to avoid the damage caused by sunscreens in the environment and human organism. Two of them include the use of natural photoprotectors, such as polyphenols, in association with UV filters in sunscreens and the development of new and safer UV filters. Overall, this review shows the importance of studying the impacts of sunscreens in nature and developing safer sunscreens and formulations to safeguard marine fauna, ecosystems, and humans.

Determination of ultraviolet filters in human nails using an acid sample digestion followed by ultra-high performance liquid chromatography-mass spectrometry analysis

Ultraviolet filters (UV-filters) are specific chemicals that absorb and reflect UVA and UVB radiation from the sun. They are regularly used in sunscreens and in other personal care products (PCPs), and in products like plastics, adhesives, toys, or furniture finishes. This work develops and validates a new method to determine concentrations of UV-filters (BP-1, BP-2, BP-3, BP-6, BP-8, 4-OH-BP, THB, AVB) in human nail samples. Nails are easily available and are considered to be suitable indicators of cumulative and continued exposure to harmful chemicals. The treatment of nail samples includes microwave assisted digestion/extraction (MAE) in a methanolic solution of o-phosphoric acid (0.05 mol L^-1) followed by analyte determination using ultra-high performance liquid chromatography-mass spectrometry (UHPLC-MS/MS) in multiple reaction monitoring mode. The analytes were separated in less than 10 min. The digestion procedure was optimized using multivariate techniques. Matrix-matched calibration with a pig hoof matrix was used for validating the method. A study of accuracy with spiked blank samples was also conducted. The calculated detection limits varied between 0.2 and 1.5 ng g^-1, and quantification limits between 1.0 and 5.0 ng g^-1. The trueness of the method was an estimation of the recovery, which was between 90.2% and 112.2%; with an estimated precision (relative standard deviation, % RSD) lower than 12.3% for all UV-filters. Nail samples were obtained from 22 volunteers (male and female). The results showed that BP-1 and BP-3 mainly bioaccumulate in human nails.

Monitoring and Statistical Analysis of Formation of Organochlorine and Organobromine Compounds in Drinking Water of Different Water Intakes

The main drawback of drinking water chlorination involves the formation of quite hazardous disinfection by-products (DBPs), represented mainly by halogenated species. Based on the authors’ monitoring data since 2002, the prevalence of chlorine over bromine in the composition of volatile DBPs was shown for the drinking water in Ufa (Russia). However, the situation was completely reversed in the case of semi-volatile DBPs. The principal goal of the present study involved rationalization of the results of the long-term monitoring. Gas chromatography–mass spectrometry (GC-MS) was used for the qualitative and quantitative analysis of volatile DBPs. Identification of semi-volatile compounds was carried out with GC-MS, while gas chromatography with an atomic emission detector (GC-AED) was used for their quantification. A significant contribution of oxygen to the composition of semi-volatile compounds proves the decisive role of the dissolved organic matter oxidative destructive processes. Statistical analysis revealed notable linear correlations for trihalomethane and haloacetic acid formation vs. chlorine dose. On the contrary, halogenated semi-volatile products do not demonstrate any correlations with the water quality parameters or chlorine dose. Principal component analysis (PCA) placed them into separate groups. The results allow for proposing that formation of the organohalogenated species involved the fast penetration of bromine into the humic matter molecules and, further, their oxidative destruction by active chlorine.

GC-HRMS with Complementary Ionization Techniques for Target and Non-target Screening for Chemical Exposure: Expanding the Insights of the Air Pollution Markers in Moscow Snow

Environmental exposure assessment is an important step in establishing a list of local priority pollutants and finding the sources of the threats for proposing appropriate protection measures. Exposome targeted and non-targeted analysis as well as suspect screening may be applied to reveal these pollutants. The non-targeted screening is a challenging task and requires the application of the most powerful analytical tools available, assuring wide analytical coverage, sensitivity, identification reliability, and quantitation. Moscow, Russia, is the largest and most rapidly growing European city. That rapid growth is causing changes in the environment which require periodic clarification of the real environmental situation regarding the presence of the classic pollutants and possible new contaminants. Gas chromatography - high resolution time-of-flight mass spectrometry (GC-HR-TOFMS) with electron ionization (EI), positive chemical ionization (PCI), and electron capture negative ionization (ECNI) ion sources were used for the analysis of Moscow snow samples collected in the early spring of 2018 in nine different locations. Collection of snow samples represents an efficient approach for the estimation of long-term air pollution, due to accumulation and preservation of environmental contaminants by snow during winter period. The high separation power of GC, complementary ionization methods, high mass accuracy, and wide mass range of TOFMS allowed for the identification of several hundred organic compounds belonging to the various classes of pollutants, exposure to which could represent a danger to the health of the population. Although quantitative analysis was not a primary aim of the study, targeted analysis revealed that some priority pollutants exceeded the established safe levels. Thus, dibutylphthalate concentration was over 10-fold higher than its safe level (0.001 mg/L), while benz[a]pyrene concentration exceeded Russian maximal permissible concentration value of 5 ng/L in three samples. The large amount of information generated during the combination of targeted and non-targeted analysis and screening samples for suspects makes it feasible to apply the big data analysis to observe the trends and tendencies in the pollution exposome across the city.

Transformation of resveratrol under disinfection conditions

Trans-resveratrol becomes more and more popular all over the world as a powerful antioxidant. Since its positive properties, including antioxidant, anti-inflammatory, anti-tumor are indisputable, nowadays trans-resveratrol is used as a component of various products from nutriceutics to body care formulations, where it is supposed to behave as natural antioxidant and anti-aging compound. It is also added to food packaging materials to increase their stability or/and prevent oxidation. Nevertheless, being released to the environment resveratrol easily forms various transformation products with potentially negative environmental and health effects. The present paper deals with transformation of pure resveratrol and its formulation used as UV-protectors in conditions of aquatic chlorination. Over 80 transformation products were tentatively identified using gas chromatography-high resolution mass spectrometry (GC-HRMS) and ultra pressure liquid chromatography-high resolution mass spectrometry (UPLC-HRMS). Chlorinated phenols and biphenyls are the most relevant among them. Estimation of toxicity of resveratrol products was carried out using luminescent bacteria V. fischeri tests.

Photolytic and photocatalytic degradation of doxazosin in aqueous solution

Doxazosin (DOX), a selective alpha blocker, is widely used in medical therapy as an effective antihypertensive agent. It is a frequently prescribed drug and for this reason, environmental and ecotoxicological research is of great importance in terms of exposure and risk for both aquatic species and humans. In this study we focused on photolytic and TiO₂ photocatalytic degradation processes of doxazosin under different simulated conditions, with the emphasis on identification of degradation products. Photolytic (without TiO₂) experiments were performed in the presence and absence of oxygen, while photocatalytic degradation of doxazosin aqueous solution has been carried out under constant oxygen flow. DOX degradation was more efficient in the TiO₂/UVA photocatalytic experiment than during photolytic processes (UVA and UVC, UVC-N₂). LC-HRMS analyses with electrospray ionization allowed observing the formation of several major degradation products depending on the reaction conditions (presence or absence of oxygen, photocatalysis). The transformation products were identified based on exact mass measurements, isotopic distribution, and fragmentation pattern. Among them, dominated C₁₇H₂₁N₅O₃ and C₁₇H₂₃N₅O₄ (cleavage of the dioxane cycle), and C₂₃H₂₅N₅O₇ (hydroxylation). The detailed degradation pathway has been proposed. Toxicity testing with V. fischeri luminescent bacteria revealed higher toxicity of samples in photolytic rather than photocatalytic experiments which might be attributed to the formation of different products.