Antibiotic-metal complexes in wastewaters: fate and treatment trajectory

Euglena mutabilis exists in a FAB consortium with microbes that enhance cadmium tolerance

BACKGROUND

Synthetic algal-fungal and algal-bacterial cultures have been investigated as a means to enhance the technological applications of the algae. This inclusion of other microbes has enhanced growth and improved stress tolerance of the algal culture. The goal of the current study was to investigate natural microbial consortia to gain an understanding of the occurrence and benefits of these associations in nature. The photosynthetic protist Euglena mutabilis is often found in association with other microbes in acidic environments with high heavy metal (HM) concentrations. This may suggest that microbial interactions are essential for the protist's ability to tolerate these extreme environments. Our study assessed the Cd tolerance of a natural fungal-algal-bacterial (FAB) association whereby the algae is E. mutabilis.

RESULTS

This study provides the first assessment of antibiotic and antimycotic agents on an E. mutabilis culture. The results indicate that antibiotic and antimycotic applications significantly decreased the viability of E. mutabilis cells when they were also exposed to Cd. Similar antibiotic treatments of E. gracilis cultures had variable or non-significant impacts on Cd tolerance. E. gracilis also recovered better after pre-treatment with antibiotics and Cd than did E. mutabilis. The recoveries were assessed by heterotrophic growth without antibiotics or Cd. In contrast, both Euglena species displayed increased chlorophyll production upon Cd exposure. PacBio full-length amplicon sequencing and targeted Sanger sequencing identified the microbial species present in the E. mutabilis culture to be the fungus Talaromyces sp. and the bacterium Acidiphilium acidophilum.

CONCLUSION

This study uncovers a possible fungal, algal, and bacterial relationship, what we refer to as a FAB consortium. The members of this consortium interact to enhance the response to Cd exposure. This results in a E. mutabilis culture that has a higher tolerance to Cd than the axenic E. gracilis. The description of this interaction provides a basis for explore the benefits of natural interactions. This will provide knowledge and direction for use when creating or maintaining FAB interactions for biotechnological purposes, including bioremediation.

Sequential two-stage cultivation system using novel microalga consortia for treatment of municipal wastewater and simultaneous biomass production: Sustainable environmental management

Monoculture-based microalgae cultivation systems to treat wastewater are well-reported. Despite that, this method has some limitations in terms of nutrient removal potential, environment adaptation, and low biomass productivity. Conversely, microalgae co-cultivation and a two-stage sequential cultivation system (TSSCS) recently emerged as a promising approach to improve the treatment process and biomass productivity through better adaptation to the environment. However, no outdoor large-scale experiments were reported using this approach which hinders the viability of the process. Thus, in the present study, a sequential two-stage large-scale outdoor novel microalgae consortia experiment was developed. In first stage consortia-assisted sequential cultivation, two ratios of Tetraselmis indica (TS) and one ratio of Picochlorum sp. (PC) (2 TS:1 PC) were cultivated in a 1000-L pond containing 75%-municipal wastewater (MWW) + 25%-ASN-III, while in the second stage, 2 PC:1 TS was cultivated in two different ponds, and each containing 375-L 2 TS:1 PC-treated water + 375-L ASN-III. Outdoor parameters and nutrient removal efficiency (NRE), biomass, and biomolecule productivity such as lipid, photosynthetic pigments, astaxanthin, and β-carotene were quantified, and cost analysis was performed. At the end of the first and second stages, 2 TS:1 PC and 2 PC:1 TS showed maximum NRE of COD (68.71 and 86.40%), TN (66.98 and 94.73%), and TP (82.70 and 94.36%), respectively. Moreover, 2 TS:1 PC and 2 PC:1 TS Pond 1 and 2 produced maximum dry biomass production; 2.41 and ∼2.54 g/L contained lipid content; 36.89 and 34.90% that have 86.50 and 55.79% FAME content respectively. Similarly, 2 TS:1 PC and 2 PC:1 TS biomass exhibited valuable pigments production of astaxanthin i.e., 0.56 and 0.35 mg/g, and β-carotene; 4.65 and 2.82 mg/g, respectively. The cost analysis suggested that only microalgal-based MWW treatment was unfeasible, while valorization of produced biomass into co-products could offset the operation costs and could allow the option for the microalgal-based sustainable approach for the treatment of MWW and recovery of valuable resources.

Cu(II) inhibited the transport of tetracycline in porous media: role of complexation

Tetracycline (TC) and Cu(II) coexist commonly in various waters, which may infiltrate into the subterranean environment through runoff and leaching, resulting in substantial ecological risks. However, the underlying mechanisms why Cu(II) affects the transport of TC in porous media remain to be further explored and supported by more evidence, especially the role of complexation. In this study, the transport of TC with coexisting Cu(II) was comprehensively explored with column experiments and density functional theory (DFT) calculation. At natural environmental concentrations, Cu(II) significantly inhibited the transport of TC in the quartz sand column. Cu(II) augmented the retention of TC in the column mainly via electrostatic force and complexation. The interaction between TC and TC-Cu complexes on the surface of SiO2 was investigated with first-principles calculations for the first time. There were strong van der Waals forces and coordination bonds on the surface of complexes and SiO2, leading to higher adsorption energy than that of TC and inhibiting its penetration. This study offers novel insights and theoretical framework for the transport of antibiotics in the presence of metal ions to better understand the fate of antibiotics in nature.

Pharmaceutical and Trace Metal Interaction within the Water-Soil-Plant Continuum: Implications for Human and Soil Health

Unplanned water reuse for crop irrigation may pose a global health risk due to the entry of contaminants into the food chain, undesirable effects on crop quality, and impact on soil health. In this study, we evaluate the impact derived from the co-occurrence of pharmaceuticals (Phs), trace metals (TMs), and one metalloid within the water-soil-plant continuum through bioassay experiments with Lactuca sativa L. Results indicate that the co-occurrence of Phs and TMs has synergistic or antagonistic effects, depending on target contaminants and environmental compartments. Complex formations between drugs and TMs may be responsible for enhanced sorption onto the soil of several Phs and TMs. Concerning plant uptake, the co-occurrence of Phs and TMs exerts antagonistic and synergistic effects on carbamazepine and diazepam, respectively. With the exception of Cd, drugs exert an antagonistic effect on TMs, negatively affecting their uptake and translocation. Drug contents in lettuce edible parts do not pose any threat to human health, but Cd levels exceed the maximum limits set for leafy vegetable foodstuffs. Under Ph-TM conditions, lettuce biomass decreases, and a nutrient imbalance is observed. Soil enzyme activity is stimulated under Ph-TM conditions (β-galactosidase) and Ph and Ph-TM conditions (urease and arylsulfatase), or it is not affected (phosphatase).

Coupling effects of aureomycin and zinc ion on nitrification process and nitrification enzymes during the biological nitrogen removal

Aureomycin and Zinc ion (Zn2+) are common antibiotics and heavy metals that exist in livestock wastewater. The coupling effects of Aureomycin and Zn2+ on the nitrification process and nitrification function enzymes are crucial for controlling nitrogen removal in livestock wastewater. However, rare studies were focused on the coupling effects of Aureomycin and Zn2+ on nitrification. This study employed a direct equipartition ray method to investigate the coupling effects of Aureomycin and Zn2+ on nitrification. The results suggested three different ratios of Aureomycin and Zn2+ affected nitrification performance differently. Ratio 1 and Ratio 2 exhibited a promotion effect with low concentrations and an inhibition effect with high concentrations on nitrification performance. The critical concentration for Ratio 1 and Ratio 2 were 5.00 mg L-1 and 1.90 mg L-1, respectively. Ratio 3 exhibited both time-dependent and concentration-dependent inhibitory effects on nitrification performance. The maximum inhibitory efficiency on nitrification performance was 90.0%, with a concentration of 34.5 mg L-1 at 96.0 h. The effects of binary mixture on nitrogen removal performance were attributed to the effects of binary mixture on nitrite oxidase activity. The qualitative evaluation of the concentration addition model and independent action model indicated Aureomycin and Zn2+ showed a synergistic effect with strong concentration-dependent and time-dependent in the whole concentration area. The synergistic effect of Aureomycin and Zn2+ on nitrite oxidase activity mainly depended on the concentration of Aureomycin. This study offers new insights into the effects of antibiotics and heavy metals on the biological nitrogen removal process.

Seeking the adsorption of tetracycline in water by Fe-modified sludge biochar at different pyrolysis temperatures

The composite material SBC-Fe-x with sludge and Fe3+ was developed by different calcination temperatures (600, 700, and 800 °C) for the removal of tetracycline (TC). The adsorption rates of SBC-Fe-600, SBC-Fe-700, and SBC-Fe-800 were 77.5%, 89%, and 91%, respectively. Furthermore, the Langmuir model indicated that the maximum adsorption capacity of SBC-Fe-700 (157.93 mg/g) was three times greater than that of SBC-Fe-600. The conclusions were confirmed by a series of characterizations that SBC-Fe-700 showed a larger specific surface area, well-developed pore structure, rich oxygen-containing functional groups and a high degree of graphitization. The results of pH experiments indicated the broad applicability of SBC-Fe-700 for TC adsorption. In addition, SBC-Fe-700 suggested outstanding performance in different water environments. This work produced a feasible adsorbent for the removal of TC, and a new direction for sludge resource utilization was proposed.

Microbial mechanisms involved in negative effects of amoxicillin and copper on humification during composting of dairy cattle manure

Livestock manure often contains various pollutants. The aim of this study was to investigate how adding amoxicillin (AMX), Cu, and both AMX and Cu (ACu) affected humification during composting and the microbial mechanisms involved. The cellulose degradation rates were 16.96%, 10.86%, and 9.01% lower, the humic acid contents were 18.71%, 12.89%, and 16.78% lower, and the humification degrees were 24.72%, 24.16%, and 15.73% lower for the AMX, Cu, and ACu treatments, respectively, than the control. Adding AMX and Cu separately or together inhibited humic acid formation and decreased the degree of humification, but the degree of humification was decreased less by ACu than by AMX or Cu separately. The ACu treatment decreased the number of core bacteria involved in humic acid formation and decreased carbohydrate and amino acid metabolism during the maturing period, and thereby delayed humic acid formation and humification. The results support composting manure containing AMX and Cu.

Interconnected environmental challenges: heavy metal-drug interactions and their impacts on ecosystems

Industrial expansion and inadequate environmental safety measures are major contributors to environmental contamination, with heavy metals (HMs) and pharmaceutical waste playing crucial roles. Their negative effects are most noticeable in aquatic species and vegetation, where they accumulate in tissues and cause harmful results. Interactions between HMs and pharmaceutical molecules result in the production of metal-drug complexes (MDCs), which have the potential to disturb diverse ecosystems and their interdependence. However, present studies frequently focus on individual pollutants and their effects on specific environmental parameters, leaving out the cumulative effects of pollutants and their processes across several environmental domains. To address this gap, this review emphasizes the environmental sources of HMs, elucidates their emission pathways during anthropogenic activities, investigates the interactions between HMs and pharmaceutical substances, and defines the mechanisms underlying the formation of MDCs across various ecosystems. Furthermore, this review underscores the simultaneous occurrence of HMs and pharmaceutical waste across diverse ecosystems, including the atmosphere, soil, and water resources, and their incorporation into biotic organisms across trophic levels. It is important to note that these complex compounds represent a higher risk than individual contaminants.

Unveiling combined ecotoxicity: Interactions and impacts of engineered nanoparticles and PPCPs

Emerging contaminants such as engineered nanoparticles (ENPs), pharmaceuticals and personal care products (PPCPs) are of great concern because of their wide distribution and incomplete removal in conventional wastewater and soil treatment processes. The production and usage of ENPs and PPCPs inevitably result in their coexistence in different environmental media, thus posing various risks to organisms in aquatic and terrestrial ecosystems. However, the existing literature on the physicochemical interactions between ENPs and PPCPs and their effects on organisms is rather limited. Therefore, this paper summarized the ecotoxicity of combined ENPs and PPCPs by discussing: (1) the interactions between ENPs and PPCPs, including processes such as aggregation, adsorption, transformation, and desorption, considering the influence of environmental factors like pH, ionic strength, dissolved organic matter, and temperature; (2) the effects of these interactions on bioaccumulation, bioavailability and biotoxicity in organisms at different trophic levels; (3) the impacted of ENPs and PPCPs on cellular-level biological process. This review elucidated the potential ecological hazards associated with the interaction of ENPs and PPCPs, and serves as a foundation for future investigations into the ecotoxicity and mode of action of ENPs, PPCPs, and their co-occurring metabolites.

Aggregation-induced emission carbon dots as Al3+-mediated nanoaggregate probe for rapid and selective detection of tetracycline

Worldwide abuse of tetracycline (TC) seriously threatens environmental safety and human health. Metal-TC complexes formed by residual TC in the environment can also contribute to the spread of antibiotic resistance. Therefore, monitoring of TC residues is still required. Here, we report novel aggregation-induced emission carbon dots (AIE-Cdots) as nanoaggregate probes for the rapid and selective detection of TC residue. Riboflavin precursors with rotational functional groups led to the development of AIE-Cdots. The aggregation of AIE-Cdots was induced selectively for Al3+, amplifying the fluorescence signals owing to the restricted rotation of the side chains on the AIE-Cdot surface. The fluorescence signal of such Al3+-mediated nanoaggregates (Al3+-NAs) was further triggered by the structural fixation of TC at the Al3+ active sites, suggesting the formation of TC-coordinated Al3+-NAs. A linear correlation was observed in the TC concentration range of 0-10 μM with a detection limit of 42 nM. In addition, the strong Al3+ binding affinity of AIE-Cdots produced similar NAs and enhanced fluorescence signals in Al3+-TC mixtures. These AIE-Cdots-based nanoplatforms have a rapid response, good selectivity, and reliable accuracy for detecting TC or aluminum complexes, meeting the requirements for hazardous substance monitoring and removal in environmental applications.

Harnessing the potential of microalgae-based systems for mitigating pesticide pollution and its impact on their metabolism

Due to increased pesticide usage in agriculture, a significant concentration of pesticides is reported in the environment that can directly impact humans, aquatic flora, and fauna. Utilizing microalgae-based systems for pesticide removal is becoming more popular because of their environmentally friendly nature, ability to degrade pesticide molecules into simpler, nontoxic molecules, and cost-effectiveness of the technology. Thus, this review focused on the efficiency, mechanisms, and factors governing pesticide removal using microalgae-based systems and their effect on microalgal metabolism. A wide range of pesticides, like atrazine, cypermethrin, malathion, trichlorfon, thiacloprid, etc., can be effectively removed by different microalgal strains. Some species of Chlorella, Chlamydomonas, Scenedesmus, Nostoc, etc., are documented for >90% removal of different pesticides, mainly through the biodegradation mechanism. The antioxidant enzymes such as ascorbate peroxidase, superoxide dismutase, and catalase, as well as the complex structure of microalgae cell walls, are mainly involved in eliminating pesticides and are also crucial for the defense mechanism of microalgae against reactive oxygen species. However, higher pesticide concentrations may alter the biochemical composition and gene expression associated with microalgal growth and metabolism, which may vary depending on the type of strain, the pesticide type, and the concentration. The final section of this review discussed the challenges and prospects of how microalgae can become a successful tool to remediate pesticides.

Removal of sulfamethoxazole and Cu, Cd compound pollution by arbuscular mycorrhizal fungi enhanced vertical flow constructed wetlands

The combined pollution of antibiotics and heavy metals (HMs) has a serious impact on the water ecological environment. Previous researches mainly focused on the removal of antibiotics or HMs as single pollutants, with limited investigation into the treatment efficiencies and underlying mechanisms associated with their co-occurring pollution. In this study, 16 micro vertical flow constructed wetlands (MVFCWs) were constructed to treat composite wastewater consisting of sulfamethoxazole (SMX), copper (Cu) and cadmium (Cd), involving two different inoculation treatments (arbuscular mycorrhizal fungi (AMF) inoculated and uninoculated) and eight kinds of pollutant exposure (Control Check (CK), SMX, Cu, Cd, SMX + Cu, SMX + Cd, Cu + Cd, SMX + Cu + Cd). The findings of this study demonstrated that the inoculation of AMF in MVFCWs resulted in removal efficiencies of SMX, Cu, and Cd ranging from 18.70% to 80.52%, 75.18% to 96.61%, and 40.50% to 89.23%, respectively. Cu and CuCd promoted the degradation of SMX in the early stage and inhibited the degradation of SMX in the later stage. Cd did not demonstrate a comparable promotive impact on SMX degradation, and its addition hindered Cu removal. However, comparatively, the presence of Cu exerted a more pronounced inhibitory effect on Cd removal. Furthermore, the addition of Cu augmented the abundances of Proteobacteria, Bacteroidetes (at the phylum level) and Rhodobacter, Lacunisphaera and Flavobacterium (at the genus level), and Cu exposure showed a substantially stronger influence on the microbial community than that of Cd and SMX. AMF might confer protection to plants against HMs and antibiotics by enriching Nakamurella and Lacunisphaera. These findings proved that AMF-C. indica MVFCW was a promising system, and the inoculation of AMF effectively enhanced the simultaneous removal of compound pollution.

Source apportionment and predictable driving factors contribute to antibiotics profiles in Changshou Lake of the Three Gorges Reservoir area, China

Lakes, crucial antibiotic reservoirs, lack thorough exploration of quantitative relationships between antibiotics and influencing factors. Here, we conducted a comprehensive year-long investigation in Changshou Lake within the Three Gorges Reservoir area, China. The concentrations of 21 antibiotics spanned 35.6-200 ng/L, 50.3-348 ng/L and 0.57-57.9 ng/g in surface water, overlying water and sediment, respectively. Compared with abundant water period, surface water and overlying water displayed significantly high antibiotic concentrations in flat and low water periods, while sediment remained unchanged. Moreover, tetracyclines, fluoroquinolones and erythromycin posed notable risks to algae. Six primary sources were identified using positive matrix factorization model, with aquaculture contributing 21.2%, 22.7% and 25.4% in surface water, overlying water and sediment, respectively. The crucial predictors were screened through machine learning, redundancy analysis and Mantel test. Our findings emphasized the pivotal roles of water quality parameters, including water temperature (WT), pH, dissolved oxygen, electrical conductivity, inorganic anions (NO3⁻, Cl⁻ and F⁻) and metal cations (Ca, Mg, Fe, K and Cr), with WT influencing greatest. Total nitrogen (TN), cation exchange capacity, K, Al and Cd significantly impacted sediment antibiotics, with TN having the most pronounced effect. This study can promise valuable insights for environmental planning and policies addressing antibiotic pollution.

An efficient and simple approach to remove Cd(II) in aqueous solution by using rice straw biochar: performance and mechanisms

In recent years, cadmium pollution in water environment has become an environmental problem that could not be ignored. As a porous carbon rich solid material, biochar is an environment-friendly new material because of its ultra-high adsorption capacity and strong chemical stability. In this study, rice straw biochar (RS-Biochar) was successfully prepared at different temperatures for removal of Cd(II) from aqueous solution. Through a series of characterization and adsorption experiments, the adsorption principle of Cd(II) by RS-Biochar was deeply studied. The results showed that RS-Biochar prepared at 600 °C (BioC600) has high specific surface area (232.6 m2/g) and shows high Cd(II) removal rate of 91.23% with the maximum Cd(II) adsorption capacity of 8.62 mg/g. The Langmuir model fit well to describe the adsorption process of Cd(II) on the BioC600. The mechanism analysis showed that hydroxyl and carboxyl groups on the biochar surface were concerned in the removal of Cd(II). The formation of CdCO3 in the adsorption process was also be proven. Importantly, RS-Biochar could be conveniently produced with needed scale, displaying a promising approach for remediating Cd(II)-contaminated water environment and a huge application potential.

The role of magnesium ion in the interactions between humic acid and tetracycline in solution

Coexisting tetracycline (TC), dissolved organic matter (DOM), and metal cations in aqueous environments might form complexes and consequently affect the environmental fate of TC. In this study, the interactions among coexisting humic acid (HA), TC, and Mg(II) in solutions were investigated by equilibrium dialysis batch experiments and nuclear magnetic resonance hydrogen spectroscopy (1H NMR) characterization. In the binary systems, the dimethylamine (4Me2NH+) functional group on the A-ring of TC bound to the oxygen-containing functional groups of HA via hydrogen bond. The solution pH affected the agglomeration morphology and dissociation of the oxygen-containing functional groups of HA as well as protonation and spatial conformation of TC, which in turn affected the HA-TC interactions. The complexation sites and ratio of Mg(II) on TC affect the binding mode in the ternary system. When the TC-Mg(II) complexation ratio is 1:1, the B, C, and D rings of TC preferentially complex with Mg(II), resulting in the change of TC from an extended to a twisted conformation. At this time, Mg(II) had a weaker inhibitory effect on binding affinity between HA and TC. When the complexation ratio was 1:2, the second Mg(II) complexation deactivated the 4Me2NH + on the A ring and further stabilized TC twisted conformation, resulting in a stronger inhibitory effect on the binding of TC to HA. Under acidic conditions, the solution pH mainly caused the difficulty in forming TC-Mg(II) complexes. The inhibitory effect of Mg(II) on the binding between HA and TC is weaker than that under alkaline conditions.

Efficient removal of antibiotics from water by highly crosslinked metal-alginate particles: Preparation, isotherms, kinetics, and microbiological assay

Traces of antibiotics reaching aquatic environment lead to the emergence of antimicrobial resistance (AMR). The efficient removal of antibiotics (ATBs) traces from wastewater is essential to tackle the AMR. In this study, a novel solid-state crosslinking method of alginate (ALG) was developed and applied to specifically remove ATBs from water. A wide range of crosslinkers (Ca2+, Zn2+, Cu2+, Ni2+, Fe3+ and Al3+) was used and the crosslinking nature, density, and distribution were evidenced by FTIR, ICP-MS, and SEM-EDS. Compared with ionotropic gelation, the novel solid-state crosslinking method proved superior in term of ease of production, high crosslinking degree, and ATBs removal capacity. Fe-ALG and Zn-ALG showed high removal capacity of ciprofloxacin (356.5 mg/g and 928.6 mg/g) and doxycycline (90 mg/g and 690 mg/g), however, they were less effective toward amoxicillin (11.5 mg/g and 6 mg/g). Removal isotherms and kinetics followed type I and pseudo-second order suggesting a chemisorption removal mechanism. Fe-ALG was successfully regenerated with no loss in ATB removal capacity. The microbiological assay showed significant reductions of antibacterial activities after ATBs removal from water. Overall, metal-ALG systems obtained by solid-state crosslinking are promising for ATBs removal from wastewater giving the ease of production, high efficiency, regenerability, and scalability potential.

Mechanism and synergistic effect of sulfadiazine (SDZ) and cadmium toxicity in spinach (Spinacia oleracea L.) and its alleviation through zinc fortification

Cadmium (Cd) and antibiotic's tendency to accumulate in edible plant parts and fertile land is a worldwide issue. The combined effect of antibiotics and heavy metals on crops was analyzed, but not mitigation of their toxicity. This study investigated the potential of zinc oxide nanoparticles (ZnO NPs) to alleviate the SDZ and Cd toxicity (alone/combined) to promote spinach growth. Results revealed that the ZnO 200 mg L-1 spray decreased the malondialdehyde (MDA) 14%, hydrogen peroxide (H2O2) 13%, and electrolyte leakage (EL) 7%, and increased the superoxide dismutase (SOD) 8%, peroxidase (POD) 25%, catalase (CAT) 39% and ascorbate peroxidase (APX) 12% in spinach leaves under combined SDZ+Cd (25 mg Kg-1 +50 mg Kg-1) stress compared to ZnO 100 mg L-1 spray. Likewise, ZnO NPs 200 mg L-1 spray enhanced the zinc (Zn) 97%, iron (Fe) 86%, magnesium (Mg) 35%, manganese (Mn) 8%, and potassium (K) 23% in shoots under combined SDZ+Cd (25 mg Kg-1 +50 mg Kg-1) stress compared to ZnO 100 mg L-1 spray. Further, ZnO 200 mg L-1 spray reduced Cd uptake in roots by 9% and shoots 15% under combined SDZ+Cd (25 mg Kg-1 +50 mg Kg-1) stress compared to ZnO 100 mg L-1. Overall, ZnO NPs alleviated the SDZ and Cd toxicity and enhanced spinach growth in all treatments.

Short-term influence of polytetrafluoroethylene micro/nano-plastics on the inhibition of copper and/or ciprofloxacin on the nitrifying sludge activities based on concentration addition and independent action models

Short-term influence of polytetrafluoroethylene micro/nano-plastics (PTFE-MPs/NPs) on the inhibition of copper (Cu2+) and/or ciprofloxacin (CIP) on the nitrifying sludge activities was explored based on concentration addition (CA) and independent action (IA) models. The half maximal inhibitory concentration (IC50) of Cu2+, CIP, PTFE-MPs (3 μm), and PTFE-NPs (800 nm) on the specific ammonium oxidation rate (SAOR) of nitrifying sludge was 64.57, 51.29, 102.33 and 93.33 mg L-1, respectively, while those on the specific nitrite oxidation rate (SNOR) of nitrifying sludge were 77.62, 32.36, 104.70 and 97.72 mg L-1, respectively. Among the five binary mixtures and two ternary mixtures composed by Cu2+, CIP, and/or PTFE-MPs/NPs, it was found that the two joint inhibitory actions from ternary mixtures on the SAOR and SNOR of the sludge showed time-dependent characteristics by analyzing of CA and IA models, while the five combined inhibitory effects from different binary mixtures did not all have time-dependent features. The two joint inhibition actions from diverse ternary mixtures on the SAOR at the exposure time of 60 min and on the SNOR at 90 min showed always concentration-dependent features, while the combined inhibitions with concentration-dependent characteristics had never been observed in the binary Cu2+ and PTFE-NPs mixtures at different exposure time. The Cu2+, CIP, and PTFE-MPs mixtures (or Cu2+, CIP, and PTFE-NPs mixtures) had synergistic actions on the SAOR at 90 min and antagonistic effects on the SNOR at 60 min based on CA and IA models, and these combined inhibitions did not exhibit concentration-dependent characteristics. In contrast, the joint inhibitory effects (on the SAOR and SNOR) with concentration-dependent features were found in the binary mixtures of CIP and PTFE-MPs at different exposure time, and the join inhibition changed from synergism to antagonism as the increasing concentration of mixed CIP and PTFE-MPs. This study provides novel perspectives for understanding the combined influence of plastic particles with different sizes, antibiotics, and heavy metals on the biological wastewater treatment process.

Enhanced photolysis of tetracycline by Zn(II): Role of complexation

Zn(II) is a necessary additive during antibiotic production and aquaculture, leading to the coexistence of Zn(II) and antibiotics in aquatic environment, especially in receiving waters of pharmaceutical and aquaculture wastewater. However, the roles of Zn(II) in the photochemical behavior of antibiotics are still not clear, which limits the understanding of the fate of antibiotic in nature. In this study, tetracycline (TC) was selected as typical antibiotic to evaluate the effect of Zn(II) on antibiotic photolysis. The removal of TC was accelerated by 22.75 % with TC:Zn(II) molar ratio at 1:5. The mechanism of Zn(II)-induced TC photolysis was explored via reactive oxygen species (ROS) analysis and density functional theory (DFT) calculation for the first time. Zn(II) could enhance the formation of TC excited states and further produce more singlet oxygen (12.54 % higher than control group) to promote indirect photolysis. Besides, Zn(II) could react with TC via complexation, and the complex was more vulnerable to attack by reactive oxygen species due to more active sites. Furthermore, the structure and toxicity of intermediates were identified with mass spectrometer, T.E.S.T. and ECOSAR software. Zn(II) hardly changed the degradation path of TC, and TC was mainly degraded via ring opening, demethylation, deamidation, and hydrogen abstraction with more toxic intermediates than the parent molecule. This work is significant to better understand the environmental fate of antibiotics, and also provides new insight into wastewater treatment in the pharmaceutical and aquaculture industry.

Adsorption of tetracycline by polycationic straw: Density functional theory calculation for mechanism and machine learning prediction for tetracyclines' remediation

The abuse of antibiotics causes serious environmental pollution, whose removal has become a hot topic. The adsorption of tetracycline (TC) on a prepared polycationic straw (MMS) was investigated. The kinetic, thermodynamic and adsorption isotherm models showed that adsorption of TC by MMS was a spontaneous, monolayer reaction with coexistence of physical and chemical process. Density functional theory indicated that the adsorption of TC resulted from electrostatic interaction and hydrogen bonds, which proved the mechanism of TC by macromolecular biomass for the first time. The expected and empirical values of TC adsorption showed a high fit degree, through predication of machine learning, indicating the feasibility and avoiding lots of experiments. Further, the adsorption ability of MMS to other TCs was predicted, founding that the highest removal efficiency was doxycycline, which provides a novel strategy for removal of other pollution and reduce of economic and time cost in practical application.

Imipenem-metal complexes: Computational analysis and toxicity studies with wastewater model microorganisms

The occurrence of antibiotic residues in diverse water sources has long been acknowledged as a potential health concern due to the emergence and spread of antibiotic-resistant bacteria and genes. However, there have been limited studies into the presence of antibiotic-metal complexes (AMCs) in real-time wastewater matrices, and their impact on wastewater microbial communities. The present work, in this regard, investigated the stability of Imipenem-metal complexes (Me = Mg (II), Ca (II), Fe (II), Cu (II), and Al (III)) with computational studies, stoichiometry with potentiometric measurements, and their antibacterial activity towards wastewater model microorganisms- Bacillus subtilis (B. subtilis) and Escherichia coli (E. Coli) by Colony Forming Unit (CFU) method. The lower energy of Imipenem-metal complexes than the parent antibiotic- Imipenem, during energy optimization using density functional (DFT) methods, revealed that metal interactions of Imipenem stabilize the drug by minimizing its energy. Further, CFU studies indicated that these complexes display higher antimicrobial activity than parent antibiotics. The electron delocalization over the entire chelated system (AMCs) reduces polarity and increases the lipophilicity of the complexes, thereby facilitating stronger interaction between AMCs and the bacterial cell membrane. Results indicate increased antibacterial activity of Imipenem-metal complexes for both E. coli and B. subtilis. The antibacterial activity, was however, more pronounced in B. subtilis, with >97% growth inhibition for metal complexes of Imipenem (at a Minimum Inhibitory Concentration of 20 nM or 6 ppb (i.e., MIC90)), for both the stoichiometric ratios (metal to ligand) ratios (M: L 1: 1 and 2: 1). All around, with increased stability and toxicity, AMCs are emerging as contaminants of concern and demand immediate attention to devise methods for their removal.

Estimation of stability constants of Fe(III) with antibiotics and dissolved organic matter using a novel UV-vis spectroscopy method

Determining conditional stability constant (Kcond) is paramount in assessing complex stability, particularly in Fe(III) complexes that are prevalent in actual surface water and wastewater matrices. In this study, existing methods of Kcond determination were evaluated and a novel UV-Vis spectroscopy method was proposed based on the evaluation of these approaches. Model ligands (ethylenediaminetetraacetic acid (EDTA), nitrilotriacetic acid (NTA), and oxalic acid (OA)), as well as common antibiotics (kanamycin (Kana) and tetracycline (TTC)), were employed to determine the Kcond of the Fe(III)-ligand complexes under neutral conditions (pH 6.5). The obtained fitting results revealed that the logKcond were in the order of Fe(III)-EDTA (7.08) > Fe(III)-NTA (4.67) > Fe(III)-OA (4.32) > Fe(III)-TTC (4.28) > Fe(III)-Kana (3.07). In addition to these single ligands, the methodology was extended to the Fe(III) complexation with humic acid (HA), a complex mixture of organic components, where the fitting result indicated a logKcond of 5.02 M-1. The method's application domain was analyzed by numerical analysis and combined with experimental results. The findings demonstrate that the proposed methodology possesses satisfactory measurement capability for Kcond ranging from 103 to 107 M-1, suggesting its broad applicability to the majority of complexes. This method can provide valuable insights into the impact of Fe(III) complexes within the water matrix.

Contribution of wastewater to antimicrobial resistance: A review article

OBJECTIVES

Antimicrobial resistance (AMR) is a global challenge that has raised concern globally, owing to its detrimental effects on the health and economy of countries. The ever-growing threat of AMR and sources of AMR are still being investigated. Wastewater plays an important role as a habitat for bacteria and an environment conducive to gene transfer. The primary aim of this review was to highlight the contribution of wastewater to AMR.

METHODS

Evidence of AMR in wastewater was drawn from literature published in the last 10 years, from 2012 to 2022.

RESULTS

Wastewater from agricultural practices, pharmaceutical manufacturing plants, and hospital effluents was established to promote AMR. Furthermore, stress factors such as the presence of antibiotics, heavy metals, pH, and temperature initiate and propagate AMR in bacteria living in wastewater. AMR in bacteria from wastewater was established to be either natural or acquired. Wastewater treatment techniques such as membrane filtration, coagulation, adsorption, and advanced oxidation processes have been used to remove resistant bacteria with varying success levels.

CONCLUSION

Wastewater is a major contributor to AMR, and an understanding of its role in AMR is necessary to find a lasting solution. In this regard, the spread of AMR in wastewater should be considered a threat that requires a strategy to stop further damage.

Fabrication and optimization of paper chips from calcinated Fe-MOFs for rapid and in situ visual detection of tetracyclines in water environments

Antibiotics such as tetracyclines (TCs) have become a major threat to ecosystem safety and human health, as their abuse has caused the occurrence and proliferation of antibiotic-resistant bacteria and genes. Currently, there is still a lack of convenient in situ methods for the detection and monitoring of TC pollution in actual water systems. This research reports a paper chip based on the complexation of iron-based metal organic frameworks (Fe-MOFs) and TCs for rapid and in situ visual detection of representative oxytetracycline (OTC) pollution in water environments. The optimized complexation sample NH₂-MIL-101(Fe)- 350 obtained by calcination at 350 °C exhibited the highest catalytic activity and was then used for paper chip fabrication by printing and surface modification. Notably, the paper chip demonstrated a detection limit as low as 17.11 nmol L^-1 and good practicability in reclaimed water, aquaculture wastewater, and surface water systems, with OTC recovery rates of 90.6-111.4%. More importantly, the presence of dissolved oxygen (9.13-12.7 mg L^-1), chemical oxygen demand (0.52-12.1 mg L^-1), humic acid (< 10 mg L^-1), Ca²⁺, Cl^-, and HPO₄^2- (< 0.5 mol L^-1) had negligible interference on the detection of TCs by the paper chip. Therefore, this work has developed a promising method for rapid and in situ visual monitoring of TC pollution in actual water environments.

Towards direct detection of tetracycline residues in milk with a gold nanostructured electrode

Tetracycline antibiotics are used extensively in veterinary medicine, but the majority of the administrated dose is eliminated unmodified from the animal through various excretion routes including urine, faeces and milk. In dairy animals, limits on residues secreted in milk are strictly controlled by legislation. Tetracyclines (TCs) have metal chelation properties and form strong complexes with iron ions under acidic conditions. In this study, we exploit this property as a strategy for low cost, rapid electrochemical detection of TC residues. TC-Fe(III) complexes in a ratio of 2:1 were created in acidic conditions (pH 2.0) and electrochemically measured on plasma-treated gold electrodes modified with electrodeposited gold nanostructures. DPV measurements showed a reduction peak for the TC-Fe(III) complex that was observed at 50 mV (vs. Ag/AgCl QRE). The limit of detection in buffer media was calculated to be 345 nM and was responsive to increasing TC concentrations up to 2 mM, added to 1 mM FeCl3. Whole milk samples were processed to remove proteins and then spiked with tetracycline and Fe(III) to explore the specificity and sensitivity in a complex matrix with minimal sample preparation, under these conditions the LoD was 931 nM. These results demonstrate a route towards an easy-to-use sensor system for identification of TC in milk samples taking advantage of the metal chelating properties of this antibiotic class.

An Automated Solid-Phase Extraction-UPLC-MS/MS Method for Simultaneous Determination of Sulfonamide Antimicrobials in Environmental Water

The large-scale use of sulfonamide antimicrobials in human and veterinary medicine has seriously endangered the ecological environment and human health. The objective of this study was to develop and validate a simple and robust method for the simultaneous determination of seventeen sulfonamides in water using ultra-high performance liquid chromatography-tandem mass spectrometry coupled with fully automated solid-phase extraction. Seventeen isotope-labeled internal standards for sulfonamides were used to correct matrix effects. Several parameters affecting extraction efficiency were systematically optimized, and the enrichment factors were up to 982-1033 and only requiring about 60 min per six samples. Under the optimized conditions, this method manifested good linearity (0.05-100 μg/L), high sensitivity (detection limits: 0.01-0.05 ng/L), and satisfactory recoveries (79-118%) with acceptable relative standard deviations (0.3-14.5%, n = 5). The developed method can be successfully utilized for the determination of 17 sulfonamides in pure water, tap water, river water, and seawater. In total, six and seven sulfonamides were detected in river water and seawater, respectively, with a total concentration of 8.157-29.676 ng/L and 1.683-36.955 ng/L, respectively, and sulfamethoxazole was the predominant congener.

Simultaneous removal of pharmaceuticals and heavy metals from aqueous phase via adsorptive strategy: A critical review

The coexistence of pharmaceuticals and heavy metals is regarded as a serious threat to aquatic environments. Adsorbents have been widely applied to the simultaneous removal of pharmaceuticals and metals from aqueous phase. Through a comprehensive review, behaviors that promote, inhibit, or have no effect on simultaneous adsorption of pharmaceuticals and heavy metals were found to depend on the system of contaminants and adsorbents and their environmental conditions, such as: characteristics of adsorbent and pollutant, temperature, pH, inorganic ions, and natural organic matter. Bridging and competition effects are the main reasons for promoting and inhibiting adsorption in coexisting systems, respectively. The promotion is more significant in neutral or alkaline conditions. After simultaneous adsorption, a solvent elution approach was most commonly used for regeneration of saturated adsorbents. To conclude, this work could help to sort out the theoretical knowledge in this field, and may provide new insights into the prevention and control of pharmaceuticals and heavy metals coexisting in wastewater.

Combined effects of amoxicillin and copper on nitrogen transformation and the microbial mechanisms during aerobic composting of cow manure

Pollutants in livestock manure have a compound effect during aerobic composting, but research to date has focused more on single factors. This study investigated the effects of adding amoxicillin (AMX), copper (Cu) and both (ACu) on nitrogen transformation and the microbial mechanisms in cow manure aerobic composting with wheat straw. In this study, compared with CK, AMX, Cu, and ACu increased NH₃ cumulative emissions by 32.32%, 41.78% and 8.32%, respectively, due to their inhibition of ammonia oxidation. Coexisting AMX and Cu decreased the absolute abundances of amoA/ nxrA genes and increased the absolute abundances of nirS /nosZ genes, but they had an antagonistic effect on the changes in functional gene abundances. Pseudomonas and Luteimonas were enriched during the thermophilic and cooling periods due to the addition of AMX and ACu, which enhanced denitrification in these two groups. Moreover, adding AMX and/or Cu led to more complex bacterial networks, but the effect of the two pollutants was lower than those of the individual pollutants. These findings provide theoretical and experimental support for controlling typical combined pollution with antibiotics and heavy metals in livestock manure.

Enhanced activity of Fe/Mn nanoparticles using a response surface methodology and mechanism for removing oxytetracycline and copper ion

As feed additives, oxytetracycline (OTC) and copper ion (Cu(II)) are often detected in livestock and poultry farming wastewater. To address this issue, firstly, the synthesis conditions of Fe/Mn nanoparticles (Fe/Mn NPs) were initially optimized using a response surface methodology (RSM) to yield highly active Fe/Mn NPs, where the application of RSM significantly increased the Fe/Mn NPs' efficiency in removing co-contamination OTC and Cu(II),respectively, from 45.8 to 86.2% and 14.9-67.2%. Secondly, scanning electron microscope and Nitrogen adsorption-desorption isotherms results showed that Fe/Mn NPs were composed of elliptic particles between 20 and 40 nm, a specific surface area of 59.5 m² g^-1, and a mean pore diameter of 5.27 nm. Fourier infrared spectrometer and X-ray photoelectron spectroscopy analysis revealed that amino, carboxyl and hydroxyl functional groups existed on the surface. Zeta potential indicated that Fe/Mn NPs maintained a high negative charge density between pH 1 and 11. These surface properties possessed by the green synthesized Fe/Mn NPs resulted in high adsorption efficiency for co-contamination OTC and Cu(II). Based on this, a removal mechanism based on a combination of complex-bridging effect, pore-filling, hydrogen bonding, surface complexation, ion exchange and electrostatic attraction was proposed. Finally, the assessment of Fe/Mn NPs used in swine wastewater demonstrated that both 99.9% OTC and 55.6% Cu(II) were removed.

Spatial and temporal distribution characteristics of antibiotics and heavy metals in the Yitong River basin and ecological risk assessment

Due to rapid socioeconomic development, antibiotic pollution and heavy metal pollution are receiving increasing amounts of attention. Both antibiotics and heavy metals in the environment are persistent and toxic, and the interactions between the pollutants create potential long-term hazards for the ecological environment and human health as mixed pollutants. In this study, the surface water of the Yitong River in Changchun was used as the research object, and the hazards associated with antibiotics and heavy metals in the surface water were assessed by analyzing the spatial and temporal distribution characteristics of antibiotics and heavy metals and by using ecological risk assessment and human health risk assessment models. The results showed that ofloxacin (OFL) and norfloxacin (NOR) varied seasonally according to the seasonal climate, with total concentrations ranging from 17.65 to 902.47 ng/L and ND to 260.49 ng/L for OFL and NOR, respectively, and from 8.30 to 120.40 μg/L, 1.52 to 113.41 μg/L and 0.03 to 0.04 μg/L for copper (Cu), zinc (Zn) and cadmium (Cd), respectively. In terms of spatial distribution, the concentration of antibiotics in the urban sections, which had intensive human activities, was higher than that in the suburban sections, while the concentration of heavy metals in the suburban sections, which had intensive agricultural operations, was greater than that in the urban section. Ecological risk evaluation showed that NOR and OFL were present in the water bodies at a high-risk level, Cd was at a low pollution level, and the heavy metal Cd was the primary pollutant associated with health risks toward for adults and children, and it was mainly at a medium risk level. Additionally, both antibiotics and heavy metals posed higher health risks for children than for adults.

Removal mechanism of tetracycline-Cr(Ⅵ) combined pollutants by different S-doped sludge biochars: Role of environmentally persistent free radicals

In this work, by using sodium thiosulfate as the S source, S-doped biochars were prepared to remove tetracycline/hexavalent chromium (TC-Cr (Ⅵ)) combined pollutants in aqueous solutions. The concentration of environmentally persistent free radicals (EPFRs) was used to directly determine the degradation of TC and the reduction of Cr (Ⅵ). The concentration of EPFRs in S-doped hydrothermal + pyrocarbon (S-HPBC) (3.64 × 10¹⁹ spins/g) was greater than that of S-doped hydrochar (S-HBC) (5.64 × 10¹⁸ spins/g) and S-doped pyrocarbon (S-PBC) (6.53 × 10¹⁸ spins/g). The increase in EPFRs concentration after S doping was positively correlated with the number of defect structures. In the TC-Cr (Ⅵ) system, the reduction efficiency of Cr (Ⅵ) decreased due to competition for electrons, while the TC degradation efficiency remained high. This was likely because Cr (Ⅵ) reduction promoted the degradation of TC. In addition, de-complexation was the primary factor for the removal of TC-Cr (Ⅵ), and some ROS were consumed during this process. The thiophene groups (-C-S-C-) that formed after S-doping of biochar were the main functional groups involved in the catalytic degradation of TC. In the radical pathway, SO₄^•- and •OH provided the greatest contribution to the degradation of TC, while ¹O₂ contributed the most to TC degradation via a non-radical pathway. The regeneration experiment confirmed that S-doped biochar could be reused and maintained a high pollutant removal efficiency. S-HPBC is a promising modified biochar material for removing mixed pollutants.

Antimicrobial and the Resistances in the Environment: Ecological and Health Risks, Influencing Factors, and Mitigation Strategies

Antimicrobial contamination and antimicrobial resistance have become global environmental and health problems. A large number of antimicrobials are used in medical and animal husbandry, leading to the continuous release of residual antimicrobials into the environment. It not only causes ecological harm, but also promotes the occurrence and spread of antimicrobial resistance. The role of environmental factors in antimicrobial contamination and the spread of antimicrobial resistance is often overlooked. There are a large number of antimicrobial-resistant bacteria and antimicrobial resistance genes in human beings, which increases the likelihood that pathogenic bacteria acquire resistance, and also adds opportunities for human contact with antimicrobial-resistant pathogens. In this paper, we review the fate of antimicrobials and antimicrobial resistance in the environment, including the occurrence, spread, and impact on ecological and human health. More importantly, this review emphasizes a number of environmental factors that can exacerbate antimicrobial contamination and the spread of antimicrobial resistance. In the future, the timely removal of antimicrobials and antimicrobial resistance genes in the environment will be more effective in alleviating antimicrobial contamination and antimicrobial resistance.

Biochar Facilitated Direct Interspecies Electron Transfer in Anaerobic Digestion to Alleviate Antibiotics Inhibition and Enhance Methanogenesis: A Review

Efficient conversion of organic waste into low-carbon biofuels such as methane through anaerobic digestion (AD) is a promising technology to alleviate energy shortages. However, issues such as inefficient methane production and poor system stability remain for AD technology. Biochar-facilitated direct interspecies electron transfer (DIET) has recently been recognized as an important strategy to improve AD performance. Nonetheless, the underlying mechanisms of biochar-facilitated DIET are still largely unknown. For this reason, this review evaluated the role of biochar-facilitated DIET mechanism in enhancing AD performance. First, the evolution of DIET was introduced. Then, applications of biochar-facilitated DIET for alleviating antibiotic inhibition and enhancing methanogenesis were summarized. Next, the electrochemical mechanism of biochar-facilitated DIET including electrical conductivity, redox-active characteristics, and electron transfer system activity was discussed. It can be concluded that biochar increased the abundance of potential DIET microorganisms, facilitated microbial aggregation, and regulated DIET-associated gene expression as a microbial mechanism. Finally, we also discussed the challenges of biochar in practical application. This review elucidated the role of DIET facilitated by biochar in the AD system, which would advance our understanding of the DIET mechanism underpinning the interaction of biochar and anaerobic microorganisms. However, direct evidence for the occurrence of biochar-facilitated DIET still requires further investigation.

Damage and elimination of soil and water antibiotic and heavy metal pollution caused by livestock husbandry

The combination of antibiotics and heavy metals (HMs) increases the toxicity range of influence and requires additional research attention. This article analyzed the toxicity mechanisms and damage of combined pollution. Cross-resistance, co-resistance, and co-regulation are the primary toxicity mechanisms. Combined pollution increases antibiotic resistance genes (ARGs), increases bacterial resistance, and promotes the horizontal transfer of ARGs, affecting the types and distribution of microorganisms. The hazard of combined pollution varies with concentration and composition. The physicochemical and biological technologies for eliminating combined pollution are primarily elaborated. Adsorption, photocatalytic degradation, and microbial treatment show high removal rates and good recyclability, indicating good application potential. This review provides a basis and reference for the further study the elimination of combined antibiotic and HM pollution.

Structure, mechanism, and toxicity in antibiotics metal complexation: Recent advances and perspectives

Antibiotic-metal complexes (AMCs) formed by antibiotics and metal ions have attracted considerable attentions in recent years. Although different removal methods for AMCs have been reported in the literature, very few investigations have focused on the mechanisms and toxic effects of antibiotic-metal coordination. This review briefly describes the structural characteristics of various commonly used antibiotics and the coordination mechanisms with metal ions. Considering the complexity of the real environment, various environmental factors affecting AMC formation are highlighted. The effects of AMCs on microbial community structure and the role of metal ions in influencing resistant genes from the molecular perspective are of interest within this work. The toxicities and mechanisms of AMCs on different species of biota are also discussed. These findings underline the need for more targeted detection and analysis methods and more suitable toxicity markers to verify the combination of antibiotics with metal ions and reveal environmental toxicities in future. This review presents an innovative idea that antibiotics combined with metal ions will change the toxicity and environmental behavior of antibiotics.

Rapid Microwave-Assisted Synthesis of N/TiO2/rGO Nanoparticles for the Photocatalytic Degradation of Pharmaceuticals

Nanocomposites comprising nitrogen-doped TiO₂ and reduced graphene oxide (N/TiO₂/rGO), with different rGO loading qualities, were prepared by a cost-effective microwave-assisted synthesis method. The synthesized materials were broadly characterized by Raman spectroscopy, X-ray diffraction (XRD), infrared spectroscopy (FTIR), photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy (DRS), electron microscopy (SEM-EDS), and nitrogen adsorption/desorption isotherms. Anatase was the only crystalline phase observed for all synthesized materials. The rGO loading did not affect the morphological properties, but it positively influenced the photocatalytic activity of the nanocomposite materials, especially at low rGO loading. Photocatalysts were evaluated via the degradation of specific organic micropollutant (OMP) pharmaceuticals: ciprofloxacin (CIP), diclofenac (DCF), and salicylic acid (SA), under different radiation sources: ultraviolet A (UVA), solar light simulator (SLS), blue visible light (BVL) and cold visible light (CVL). CIP and SA were removed effectively via the synergy of adsorption and photocatalysis, while DCF degradation was achieved solely by photocatalysis. After implementing scavenger agents, photocatalytic degradation processes mainly depended on the specific pollutant type, while irradiation sources barely defined the photocatalytic mechanism. On the other hand, changes in irradiation intensity significantly influenced the photolysis process, while photocatalysis was slightly affected, indicating that irradiation spectra are more relevant than intensity.

Didecyldimethylammonium Chloride- and Polyhexamethylene Guanidine-Resistant Bacteria Isolated from Fecal Sludge and Their Potential Use in Biological Products for the Detoxification of Biocide-Contaminated Wastewater Prior to Conventional Biological Treatment

Simple Summary

Every year, more than a million tons of fecal sludge (FS) containing biocides based on quaternary ammonium compounds and guanidine derivatives, which are widely used for FS deodorization and control of microbial activity, are generated in the environmentally safe toilet complexes of Russian Railways trains. Higher disposal costs for such biocide-contaminated FS due to activated sludge toxicity increases pressure on sanitary equipment servicing companies («Ecotol Service» LLC) to more efficiently discharge FS to wastewater treatment plants. In this work, we have developed a new environmentally friendly approach to reducing the toxicity of FS, based on the use of biological products from biocide-resistant bacterial strains isolated from FS. Our approach has proven to be effective in a series of FS biodegradation experiments, biological oxygen demand tests, and a newly developed disk-diffusion bioassay.

Abstract

Toxic shock caused by the discharge of biocide-contaminated fecal sludge (FS) from chemical toilets to conventional wastewater treatment plants (WWTP) can be a major problem in activated sludge operation. It is necessary to develop new environmental approaches to mitigate the toxicity of biocides in order to avoid degrading the performance of WWTP. “Latrina”, a chemical toilet additive containing didecyldimethylammonium chloride and polyhexamethylene guanidine, is widely used in environmentally safe toilet complexes (ESTC) on Russian railway trains to deodorize FS and control microbial activity. In this work, seven biocide-resistant bacterial strains were isolated and identified from the FS of ESTC. The values of the minimum inhibitory and bactericidal concentrations of biocides for the isolated strains were 4.5–10 times higher than for the collection microorganisms. The bacterium Alcaligenes faecalis DOS7 was found to be particularly resistant to “Latrina”, the minimum inhibitory concentration of which was almost 30 times higher than recommended for ESTC. Biological products based on isolated bacterial strains proved to be effective for FS biodegradation under both aerobic and anaerobic conditions. The results of the biochemical oxygen demand test and the newly developed disk-diffusion bioassay confirmed that isolated strains contribute to reducing toxicity of biocidal agents in FS. Hyper-resistance, non-pathogenicity, and potential plant growth-promoting ability make A. faecalis DOS7 promising for use in various biological products for wastewater treatment and bioremediation of soils contaminated with biocides, as well as in agriculture to increase plant productivity.

Electron shuttles enhanced the removal of antibiotics and antibiotic resistance genes in anaerobic systems: A review

The environmental and epidemiological problems caused by antibiotics and antibiotic resistance genes have attracted a lot of attention. The use of electron shuttles based on enhanced extracellular electron transfer for anaerobic biological treatment to remove widespread antibiotics and antibiotic resistance genes efficiently from wastewater or organic solid waste is a promising technology. This paper reviewed the development of electron shuttles, described the mechanism of action of different electron shuttles and the application of enhanced anaerobic biotreatment with electron shuttles for the removal of antibiotics and related genes. Finally, we discussed the current issues and possible future directions of electron shuttle technology.

Effect of polytetrafluoroethylene nanoplastics on combined inhibition of ciprofloxacin and bivalent copper on nitrogen removal, sludge activity and microbial community in sequencing batch reactor

The work aimed to explore effects of polytetrafluoroethylene nanoplastics on joint inhibitions of ciprofloxacin and bivalent copper on the nitrogen removal in a sequencing batch reactor and its potential mechanisms. The addition of bivalent copper and/or ciprofloxacin reduced the ammonia nitrogen elimination rate with or without polytetrafluoroethylene nanoplastics. Adsorption kinetics and thermodynamics showed the binary bivalent copper and ciprofloxacin promoted their adsorptions by polytetrafluoroethylene nanoplastics. Polytetrafluoroethylene nanoplastics enhanced combined toxicities of ciprofloxacin and bivalent copper to sludge activities and microbial community involved into nitrification and denitrification due to the adsorption of ciprofloxacin and bivalent copper by polytetrafluoroethylene nanoplastics. With or without polytetrafluoroethylene nanoplastics, bivalent copper and/or ciprofloxacin caused more obvious level changes of protein than polysaccharide. This study provides novel insights for understanding the effect of combined heavy metals and antibiotics on the performance in a sequencing batch reactor with the nanoplastics stress.

Catalytic oxidation of 4-acetamidophenol with Fe3+-enhanced Cu0 particles: In-site generation and activation of hydrogen peroxide

Cu⁰ coupled with O₂ was used to degrade contaminant due to in-site generation and catalysis of H₂O₂, while the low reactivity and active dismutation reaction of Cu⁺ refrained the performance at acidic condition. In this study, the removal rate of 4-acetamidophenol increased from 27 % to 83.4 % with Fe³⁺ spiked into the Cu⁰ system within 60 min •OH was the primary reactive species in the Fe³⁺/Cu⁰ system. In the Fe³⁺/Cu⁰ system, Cu⁰ was corroded to form Cu⁺ by H⁺ and O₂, and then Cu⁺ interacted with O₂ generating H₂O₂, and meanwhile Fe³⁺ was reduced to Fe²⁺ by Cu⁺ and Cu⁰; Consequently, Cu⁺ and Fe²⁺ induced H₂O₂ to produce •OH, but Fe²⁺ was easier to catalyze H₂O₂ than Cu⁺ at acidic pH. Except for fulvic acid, common water matrix including sulfate ion, phosphate ion, chloride ion and nitrate ion had no inhibition effect on the degradation of 4-acetamidophenol in the Fe³⁺/Cu⁰ system. over 62 % of 4-acetamidophenol in tap water, Hou-lake water and well water was greatly oxidized by the Fe³⁺/Cu⁰ system. Furthermore, the amount of total dissolved copper decreased to 0.895 mg/L by the method of alkali precipitation in the Fe³⁺/Cu⁰ system. The study provided a theoretical direction to the Fe³⁺-enhanced Cu⁰ system for purifying wastewater.

Gemifloxacin-transition metal complexes as therapeutic candidates: antimicrobial, antifungal, anti-enzymatic, and docking studies of newly synthesized complexes

In the era of acquired microbial resistance (AMR), resulting in the ineffectiveness of antibiotics is of keen interest for researchers in current scenarios. Ten novel metal complexes of gemifloxacin have been synthesized by reacting it with essential and trace elements in a 2:1 ratio predetermined conducto-metrically. As these metals are either present in the body or co-administered as metallic supplements can alter the level of antibiotics. Therefore, Metal complexes of Gemifloxacin, an important member of the fluoroquinolone family, were synthesized. The possible coordination of gemifloxacin with these metals has been proposed by the electronic and elemental data obtained through molar conductance, elemental analysis, and spectroscopic techniques like ultraviolet-visible (UV-Vis), infrared (IR), and proton-nuclear magnetic resonance (¹H NMR) studies.

In the light of these studies, the monoanionic bidentate ligand behavior of gemifloxacin in complexation with metals has been revealed. For in-vitro microbial studies, these newly synthesized complexes were tested against eleven different bacteria including Gram + ve and Gram -ve organisms, and one fungal strain. The results were compared with the parent drug by applying ANOVA through SPSS software version 22. Therefore, it has been found that among all synthesized metal complexes, the G-M01 complex exhibits increased activity against B. subtilis, P. mirabilis, E. coli, K. pneumonia, and C. freundii. Complex G-M02, G-M03, G-M04, and G-M10 show more pronounced activity than Gemifloxacin against S. aureus and M. luteus. Moreover, the binding orientations of the synthesized metal complexes into the binding site of the urease enzyme revealed that all the docked metal complexes oriented away from the Ni bi-center, and the inactivation of urease is due to their interaction with entrance flap residues.

Photocatalytic reactor design and its application in real wastewater treatment using TiO2 coated on the stainless-steel mesh

The application of wastewater treatment using TiO₂ coated on the stainless-steel mesh is promising for disintegrating organic pollutants in wastewater. This research successfully coated TiO₂ particles on stainless-steel mesh for the photocatalyst process by using the dip-coating method. This method was selected due to its simplicity and low cost, as well as its extensive application prospects in wastewater treatment. The photocatalytic oxidation of real wastewater treatment was developed and designed for a photo-reactor in terms of flow rate (varied on 2.0-4.0 L/min) and light distance (varied on 5.0-15.0 cm), whereas the preparation of the material process was investigated in terms of TiO₂ catalyst dosage (varied on 1.0-3.0 g) and layers of coating (varied on 1 to 3 layers). Experiments were employed to degrade organic wastewater from methylene blue (MB) for a prelim experiment and real wastewater effluent testing for the application. The optimized TiO₂ dosage was 2.0 g with 2 layers of coating coated on the stainless-steel mesh. The designed photo-reactor was optimized with a flow rate of 2.0 L/min and a light distance of 10.0 cm to treat the organic pollutants in raw domestic wastewater effluent on photocatalytic activity. MB successfully degraded about 96% in 3 h under UV-C irradiation after adsorption equilibrium was completed (3 h), whereas the efficiency of BOD removal was 89% under UV-C irradiation in 4 h. Therefore, TiO₂ (2.0 g) coated on stainless-steel mesh with 2 layers of the coating prepared by dip-coating is a potentially effective alternative for real wastewater treatment.