Phosphoric acid pretreatment enhances the specific surface areas of biochars by generation of micropores

Lignocellulosic biomass for biochar production: A green initiative on biowaste conversion for pharmaceutical and other emerging pollutant removal

Lignocellulosic waste generation and their improper disposal has accelerated the problems associated with increased greenhouse gas emissions and associated environmental pollution. Constructive ways to manage and mitigate the pollution associated with lignocellulosic waste has propelled the research on biochar production using lignocellulose-based substrates. The sustainability of various biochar production technologies in employing lignocellulosic biomass as feedstock for biochar production not only aids in the lignocellulosic biomass valorization but also helps in carbon neutralization and carbon utilization. Functionalization of biochar through various physicochemical methods helps in improving their functional properties majorly by reducing the size of the biochar particles to nanoscale and modifying their surface properties. The usage of engineered biochar as nano adsorbents for environmental applications like dye absorption, removal of organic pollutants and endocrine disrupting compounds from wastewater has been the thrust areas of research in the past few decades. This review presents a comprehensive outlook on the up-to-date research findings related to the production and engineering of biochar from lignocellulosic biomass and their applications in environmental remediation especially with respect to wastewater treatment. Further a detailed discussion on various biochar activation methods and the future scope of biochar research is presented in this review work.

Recent advances in catalyst design, performance, and challenges of metal-heteroatom-co-doped biochar as peroxymonosulfate activator for environmental remediation

The escalation of global water pollution due to emerging pollutants has gained significant attention. To address this issue, catalytic peroxymonosulfate (PMS) activation technology has emerged as a promising treatment approach for effectively decontaminating a wide range of pollutants. Recently, modified biochar has become an increasingly attractive as PMS activator. Metal-heteroatom-co-doped biochar (MH-BC) has emerged as a promising catalyst that can provide enhanced performance over heteroatom-doped and metal-doped biochar due to the synergism between metal and heteroatom in promoting PMS activation. Therefore, this review aims to discuss the fabrication pathways (i.e., internal vs external doping and pre-vs post-modification) and key parameters (i.e., source of precursors, synthesis methods, and synthesis conditions) affecting the performance of MH-BC as PMS activator. Subsequently, an overview of all the possible PMS activation pathways by MH-BC is provided. Subsequently, Also, the detection, identification, and quantification of several reactive species (such as, •OH, SO4•-, O2•-, 1O2, and high valent oxo species) generated in the catalytic PMS system by MH-BC are also evaluated. Lastly, the underlying challenges associated with poor stability, the lack of understanding regarding the interaction between metal and heteroatom during PMS activation and quantification of radicals in multi-ROS system are also deliberated.

From scraps to purification: innovative use of food waste-derived hydrochar in eradicating pharmaceutical pollutants

Chemical products (CPs) such as carbamazepine and naproxen, present in aquatic environments, pose significant risks to both aquatic life and human health. This study investigated the use of hydrothermally carbonized food waste-derived hydrochar (AC-HTC) at three distinct temperatures (200, 250, and 300 °C) as an adsorbent to remove these CPs from water. Our research focused on the impact of hydrothermal carbonization temperature on hydrochar properties and the effects of chemical activation with phosphoric acid on adsorption capacity. Hydrothermal carbonization increased the hydrochar's surface area from 1.47 to 7.52 m2/g, which was further enhanced to 32.81 m2/g after activation with phosphoric acid. Batch adsorption experiments revealed that hydrochar produced at 250 °C (AC-HTC-250) demonstrated high adsorption capacities of 49.10 mg/g for carbamazepine and 14.35 mg/g for naproxen, outperforming several conventional adsorbents. Optimal adsorption occurred at pH 4, aligning well with the Langmuir and pseudo-first-order models. The hydrochar showed potential for regeneration and multiple uses, suggesting its applicability in sustainable wastewater treatment. Future research will explore scalability and effectiveness against a broader range of pollutants.

Experimental data and modeling of sulfadiazine adsorption onto raw and modified clays from Tunisia

In recent years, the increasing detection of emerging pollutants (particularly antibiotics, such as sulfonamides) in agricultural soils and water bodies has raised growing concern about related environmental and health problems. In the current research, sulfadiazine (SDZ) adsorption was studied for three raw and chemically modified clays. The experiments were carried out for increasing doses of the antibiotic (0, 1, 5, 10, 20, and 40 μmol L-1) at ambient temperature and natural pH with a contact time of 24 h. The eventual fitting to Freundlich, Langmuir and Linear adsorption models, as well as residual concentrations of antibiotics after adsorption, was assessed. The results obtained showed that one of the clays (HJ1) adsorbed more SDZ (reaching 99.9 % when 40 μmol L-1 of SDZ were added) than the other clay materials, followed by the acid-activated AM clay (which reached 99.4 % for the same SDZ concentration added). The adsorption of SDZ followed a linear adsorption isotherm, suggesting that hydrophobic interactions, rather than cation exchange, played a significant role in SDZ retention. Concerning the adsorption data, the best adjustment corresponded to the Freundlich model. The highest Freundlich KF scores were obtained for the AM acid-treated and raw HJ1 clays (606.051 and 312.969 Ln μmol1-n kg-1, respectively). The Freundlich n parameter ranged between 0.047 and 1.506. Regarding desorption, the highest value corresponded to the AM clay, being generally <10 % for raw clays, <8 % for base-activated clays, and <6 % for acid-activated clays. Chemical modifications contributed to improve the adsorption capacity of the AM clay, especially when the highest concentrations of the antibiotic were added. The results of this research can be considered relevant as regard environmental and public health assessment since they estimate the feasibility of three Tunisian clays in SDZ removal from aqueous solutions.

Effect of hydrothermal carbonization on pyrolysis behavior, nutrients and metal species distribution in municipal sludge

In this study, the effect of hydrothermal carbonation (HTC) on the pyrolysis behavior and the distribution of nutrients and metal species of waste-activated sludge (WAS) was investigated. Results showed that the pyrolysis activation energy range of WAS decreased from 11 to 57 kJ/mol to 10-36 kJ/mol when the hydrothermal carbonization was at 160 °C. As indicated by thermodynamic parameters, the hydrothermal carbonization process reduces the pyrolysis reaction activity of the hydrochar. The results of the chemical analysis indicate that hydrothermal carbonization significantly enhances the release of phosphorus and nitrogen, with maximum recovery at a temperature of 200 °C. The standard measurement and testing protocol revealed that hydrothermal carbonization increased the content of non-apatite inorganic P fraction in hydrochar and enhanced the availability of P. Heavy metal analysis shows that hydrothermal carbonization can strengthen the stability of heavy metals in WAS.

Adsorptive behavior of engineered biochar /hydrochar for tetracycline removal from synthetic wastewater

In this research, engineered biochar and hydrochar derived from paddy husk were compared for the adsorption tetracycline (TC) in water effluents. Biochar was produced at three different pyrolysis temperatures (e.g., 250 °C, 300 °C and 350 °C) while hydrochar was produced using three different HTC temperatures (e.g., 180 °C, 200 °C and 220 °C). The adsorptive experiments were performed for both biochar and hydrochar using well-defined experimental conditions: pH (3); initial TC concentration (10 mg/L); adsorbent dosage (1 g/L); and temperature (27 °C) to study their adsorptive performances (qe in mg/g). After selecting the best qe values for both biochar and hydrochar, both materials were modified using 20% H3PO4. A comprehensive scientific evaluation of both engineered biochar (EBC 350) and hydrochar (EHC 220) was performed using adsorption isotherm, adsorption kinetics, rate-limiting, and thermodynamics tests along with their characterization using FTIR and point of zero charge (pzc). The effects of temperature, dosage, and initial TC concentration on the adsorption process were studied for both EBC 350 and EHC 220. Acid activation improved the adsorptive performance of EHC 220 almost four times (from 1.9 to 7.5 mg/g), whereas adsorptive performance of EBC 350 improved 2.4 times from 3.8 to 9.1 mg/g. The best pH for TC adsorption onto EHC 220 was 5, whereas it was 3 for EBC 350. EBC 350 exhibited a good fit with the Freundlich model, whereas EHC 220 followed the Langmuir model. At 100 mg/L TC concentration, EHC 220 exhibited higher qe value (46.9 mg/g) compared to EBC 350 (41.7 mg/g). The Pseudo-first order kinetic model was the best fit for EHC 220 adsorption, whereas Pseudo-second order model was most suitable for EBC 350. The adsorption mechanisms involved in TC adsorption by EHC 220 included hydrogen bonding, hydrophobic effect, and π-π interaction, whereas cation exchange, mass diffusion, and π-π interaction were involved for EBC 350. The results of this study will facilitate the development of cost-effective filters with the incorporation of engineered biochar/engineered hydrochar for the active removal of emerging contaminants, like tetracycline, from wastewater so as to increase its reusable potential.

Adsorption effect and mechanism of Cd(II) by different phosphorus-enriched biochars

The resource utilization of agricultural and forestry waste, especially the high-value transformation of low-grade phosphate rock and derivatives, is an important way to achieve sustainable development. This study focuses on the impregnation and co-pyrolysis of rice straw (RS) with fused calcium magnesium phosphate (FMP), FMP modified with citric acid (CA-FMP), and calcium dihydrogen phosphate (MCP) to produce three phosphorous-enriched biochars (PBC). The Cd(II) removal efficiency of biochars before and after phosphorus modification was investigated, along with the adsorption mechanism and contribution of biochars modified with different phosphorus sources to Cd(II) adsorption. The result indicated that CA-FMP and MCP could be more uniformly loaded onto biochar, effectively increasing the specific surface area (SSA) and total pore volume. The adsorption of Cd(II) onto PBC followed a mono-layer chemisorption process accompanied by intraparticle diffusion. The adsorption of Cd(II) by PBC involved ion exchange, mineral precipitation, complexation with oxygen-containing functional groups (OFGs), cation-π interaction, electrostatic interaction, and physical adsorption. Ion exchange was identified as the primary adsorption mechanism for Cd(II) by BC and FBC (51.53% and 53.15% respectively), while mineral precipitation played a major role in the adsorption of Cd(II) by CBC and MBC (51.10% and 47.98% respectively). Moreover, CBC and MBC significantly enhanced the adsorption capacity of Cd(II), with maximum adsorption amounts of 128.1 and 111.5 mg g-1 respectively.

Adsorption of acetochlor-contaminated water systems using novel P-doped biochar: Effects, application, and mechanism

Given the serious threat of acetochlor (ACT) to the aquatic ecological environment, designing wastewater treatment-oriented adsorbents for the sustainable remediation of actual ACT-contaminated water is a promising yet challenging strategy. Herein, a novel P-doped biochar (PBC-800) with a high adsorption capacity (51.34 mg g-1) and a rapid reaction rate (47.35 mg g-1 h-1) for ACT was prepared through pyrolyzing of rice straw biomass pre-impregnated with potassium dihydrogen phosphate (KH2PO4). Additionally, P-doped biochars synthesized at different pyrolysis temperatures exhibited significant variations in ACT adsorption performance, which was mainly ascribed to the distinction between hydrophilicity and sp2 conjugate C (ID/IG = 0.84-1.08). The adsorption behavior of ACT on PBC-800 followed the Elovich kinetics and Freundlich adsorption isotherm models. Thermodynamic calculations indicated that the adsorption of ACT by PBC-800 was a spontaneously disordered decreasing exothermic process. Besides, PBC-800 exhibited a powerful anti-interference for ACT adsorption within complex water matrices, highlighting its potential for various of practical applications. Through characterization analysis and further experiments, it was proved that the excellent adsorption performance of PBC-800 on ACT was ascribed to a combination of physical and chemical adsorption mechanisms, including 57.5% pore filling, 23.4% hydrophobic interaction, 12.7% π-π interaction, and 6.4% hydrogen bonding. Moreover, PBC-800 exerted a prominent adhesion impact upon Gram-positive and negative bacteria at 3 h. This study offers a new idea for the utilization of agricultural residues and provides insights into the mechanism of ACT adsorption through its derived biochar.

Tuning active sites on biochars for remediation of mercury-contaminated soil: A comprehensive review

Mercury (Hg) contamination is acknowledged as a global issue and has generated concerns globally due to its toxicity and persistence. Tunable surface-active sites (SASs) are one of the key features of efficient BCs for Hg remediation, and detailed documentation of their interactions with metal ions in soil medium is essential to support the applications of functionalized BC for Hg remediation. Although a specific active site exhibits identical behavior during the adsorption process, a systematic documentation of their syntheses and interactions with various metal ions in soil medium is crucial to promote the applications of functionalized biochars in Hg remediation. Hence, we summarized the BC's impact on Hg mobility in soils and discussed the potential mechanisms and role of various SASs of BC for Hg remediation, including oxygen-, nitrogen-, sulfur-, and X (chlorine, bromine, iodine)- functional groups (FGs), surface area, pores and pH. The review also categorized synthesis routes to introduce oxygen, nitrogen, and sulfur to BC surfaces to enhance their Hg adsorptive properties. Last but not the least, the direct mechanisms (e.g., Hg- BC binding) and indirect mechanisms (i.e., BC has a significant impact on the cycling of sulfur and thus the Hg-soil binding) that can be used to explain the adverse effects of BC on plants and microorganisms, as well as other related consequences and risk reduction strategies were highlighted. The future perspective will focus on functional BC for multiple heavy metal remediation and other potential applications; hence, future work should focus on designing intelligent/artificial BC for multiple purposes.

Biomass directional pyrolysis based on element economy to produce high-quality fuels, chemicals, carbon materials - A review

Biomass is regarded as the only carbon-containing renewable energy source and has performed an increasingly important role in the gradual substitution of conventional fossil energy, which also contributes to the goals of carbon neutrality. In the past decade, the academic field has paid much greater attention to the development of biomass pyrolysis technologies. However, most biomass conversion technologies mainly derive from the fossil fuel industry, and it must be noticed that the large element component difference between biomass and traditional fossil fuels. Thus, it's necessary to develop biomass directional pyrolysis technology based on the unique element distribution of biomass for realizing enrichment target element (i.e., element economy). This article provides a broad review of biomass directional pyrolysis to produce high-quality fuels, chemicals, and carbon materials based on element economy. The C (carbon) element economy of biomass pyrolysis is realized by the production of high-performance carbon materials from different carbon sources. For efficient H (hydrogen) element utilization, high-value hydrocarbons could be obtained by the co-pyrolysis or catalytic pyrolysis of biomass and cheap hydrogen source. For improving the O (oxygen) element economy, different from the traditional hydrodeoxygenation (HDO) process, the high content of O in biomass would also become an advantage because biomass is an appropriate raw material for producing oxygenated liquid additives. Based on the N (nitrogen) element economy, the recent studies on preparing N-containing chemicals (or N-rich carbon materials) are reviewed. Moreover, the feasibility of the biomass poly-generation industrialization and the suitable process for different types of target products are also mentioned. Moreover, the enviro-economic assessment of representative biomass pyrolysis technologies is analyzed. Finally, the brief challenges and perspectives of biomass pyrolysis are provided.

Reactivity of aged biochars to the degradation of adsorbed p-nitrophenol: Role of intensity and species of persistent free radicals

Persistent free radicals (PFRs) in biochar have been found to the transformation of organic contaminants in environment. However, there remains insufficient comprehension on the relationship of biochar aging with interfacial reactivity of PFRs to the degradation of phenolic compound in geochemical process. Herein, we studied both sorption and degradation of p-nitrophenol (PNP) on fresh and aged biochars via H2O2 aging under anoxic condition. With increasing aging extent, the enhancive proportion of O-centered radicals was observed progressively as indicated by increased g factors. The aging of PS350 annihilated the presence of PFRs in aged biochars of low-temperature, weakening PFR intensity. But, the aging of PS650 supplied more O-centered radicals for aged biochars of high-temperature, enhancing PFR intensity. This caused the decreased degradation on 5%PS350 and 15%PS350 (37.7-79.6% decline), whereas the increased degradation on 5%PS650 and 15%PS650 (33.3-55.8% increase). At similar intensity and species of PFRs, more adsorbed amount on fresh and aged biochars produced more degradation of PNP. Nevertheless, when PFR intensity of PS650 was much lower than that of PS350, despite high sorption capacity of PS650, the degradation amount of PS350 and PS650 was comparable. The results indicated that the reactivity of C-centered radicals of PS650 was stronger than that of O-centered radicals of PS350 in anoxic system. Overall, the interfacial reactivity of biochars was simultaneously regulated by the sorption capacity of biochars and intensity and species of PFRs. This work provides a deep perspective to the impact of biochar aging on the interfacial reactivity of PRFs to phenolic compound, which will be beneficial to accurately predict the fate of organic contaminant in carbon-rich environment.

Effects of Common Biochar and Acid-Modified Biochar on Growth and Quality of Spinach in Coastal Saline Soils

The rational development and efficient utilization of saline soils can alleviate the problem of insufficient arable land faced by agricultural production in China. A prominent problem is improving soil salt and water conditions for promoting land resources' productivity in coastal areas. Biochar is widely used for soil improvement, as it has remarkable properties. A pot experiment was conducted to study the effects of two kinds of biochar (common biochar and acid-modified biochar) with three addition rates (2%, 4%, and 8%) on the growth, yield, photosynthetic characteristics, and quality of spinach. The results revealed that 2% and 4% common biochar increased the plant height, stem diameter, and leaf area index, effectively improving the yield of spinach and water productivity, while 8% common biochar was detrimental to the growth of spinach to some extent. Acid-modified biochar significantly benefited the growth and increased the water productivity of spinach, ensuring high yields, while also improved quality. Similarly, acid-modified biochar was less effective at high additions than at low-to-medium additions. The integrated biological response version 2 (IBRV2) values under acid-modified biochar treatments were all significantly higher than those under common biochar, but there is no significant difference among three treatments in the same biochar group, which suggested a pronounced amelioration in spinach growth within saline-alkali soil upon the incorporation of acid-modified biochar. Overall, applying acid-modified biochar at the rate of 4% exhibited enormous potential for increasing the yield and quality of spinach in saline soils.

Adsorption and controlled release performances of flavor compounds by rice bran insoluble dietary fiber improved through steam explosion method

In this study, steam explosion was employed as a modification process for rice bran insoluble dietary fiber (RBIDF) to improve the flavor adsorption and controlled release capacities of RBIDF. Results showed that the flavor adsorption ability of RBIDF was effectively improved due to the unfolding structure, increased specific surface area and pore volume and exposure of more functional groups after steam explosion treatment. The mechanism of the flavor adsorption behavior of modified RBIDF was preliminarily explored using adsorption kinetics and isotherms combined with SEM and DSC analysis. Results showed that the Langmuir isotherm model and pseudo-second-order kinetic model yielded the best fit to the adsorption data, indicating monolayer adsorption of flavor onto the modified RBIDF, and the adsorption was mainly driven by chemisorption process. The flavor release profile of modified RBIDF was investigated by HS-SPME/GC-MS and E-nose. After long-time storage, the flavor compounds were retained at a higher concentration in the modified RBIDF compared with the untreated RBIDF, indicating that the steam explosion treatment prolonged the retention time and enhanced the retention and controlled release capacities of RBIDF for flavor compounds. This study provides indications for potential applications of steam explosion-modified RBIDF as a novel flavor delivery system and functional ingredient.

Valorization of Biomass-Derived Polymers to Functional Biochar Materials for Supercapacitor Applications via Pyrolysis: Advances and Perspectives

Polymers from biomass waste including plant/forest waste, biological industrial process waste, municipal solid waste, algae, and livestock are potential sources for renewable and sustainable resources. Converting biomass-derived polymers to functional biochar materials via pyrolysis is a mature and promising approach as these products can be widely utilized in many areas such as carbon sequestration, power production, environmental remediation, and energy storage. With abundant sources, low cost, and special features, the biochar derived from biological polymeric substances exhibits great potential to be an alternative electrode material of high-performance supercapacitors. To extend this scope of application, synthesis of high-quality biochar will be a key issue. This work systematically reviews the char formation mechanisms and technologies from polymeric substances in biomass waste and introduces energy storage mechanisms of supercapacitors to provide overall insight into the biological polymer-based char material for electrochemical energy storage. Aiming to enhance the capacitance of biochar-derived supercapacitor, recent progress in biochar modification approaches including surface activation, doping, and recombination is also summarized. This review can provide guidance for valorizing biomass waste to functional biochar materials for supercapacitor to meet future needs.

Potentially migrating and residual components of biochar: Effects on phosphorus adsorption performance and storage capacity of black soil

Biochar has great potential to increase the soil nutrient storage capacity. However, with aging, biochar gradually disintegrates and releases fractions with migration potential, resulting in unknown effects on soil nutrient regulation. Based on this problem, we used ultrasound to separate original biochar (TB) into potentially migrating biochar (DB) and residual biochar (RB). The elemental composition and pore characteristics of TB, DB and RB were analyzed. Different fractions of biochar were applied to black soil, and the kinetic model and isothermal adsorption models were used to explore the adsorption characteristics of different treatments. Then, the effects of initial pH and coexisting ions on adsorption were compared. The adsorption mechanism and potential leaching process of phosphorus in soil were investigated. The results showed that RB had higher O and H contents and was less stable than TB, while RB was more aromatic. The phosphorus adsorption capacity of different treatments was SRB (1.3318 mg g^-1) > STB (1.2873 mg g^-1) > SDB (1.3025 mg g^-1) > SCK (1.1905 mg g^-1). SRB had optimal phosphorus adsorption performance and storage capacity, with a maximum adsorption capacity of 1.6741 mg g^-1 for the Langmuir isotherm, and it also showed excellent applicability in a pH gradient and with coexisting ions. The main adsorption mode of phosphorus by different treatments was monolayer chemisorption, related to electrostatic repulsion and oxygen-containing functional groups. DB was less effective in inhibiting soil phosphorus migration, with the cumulative leaching of SDB reaching 8.99 mg and the percentage of phosphorus in the 0-6 cm soil layer reaching only 15.42%. Overall, the results can help elucidate potential trends in the adsorption performance and migration process of soil phosphorus by biochar, and improve the comprehensive utilization efficiency of biochar.

Adsorbent biochar derived from corn stalk core for highly efficient removal of bisphenol A

Environmental-friendly biochar (BC) with low cost was obtained by simple pyrolysis of corn stalk core, which was employed as an adsorbent for efficiently removing organic pollutants in water. The physicochemical properties of BCs were characterized by various techniques, including X-ray diffractometer (XRD), Fourier transforms infrared (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectrometer (XPS), Raman, Thermogravimetric (TGA), N₂ adsorption-desorption and zeta potential tests. The influence of pyrolysis temperature on the structure and adsorption efficiency of the adsorbent was emphasized. The graphitization degree and sp² carbon content of BCs were enhanced by increasing the pyrolysis temperature, which was favorable for the enhancement of the adsorption efficiency. The adsorption results showed that corn stalk core calcined at 900 °C (BC-900) displayed exceptional adsorption efficiency toward bisphenol A (BPA) in wide pH (1-13) and temperature (0-90 °C) ranges. Moreover, adsorbent BC-900 could adsorb various pollutants from water, including antibiotics, organic dyes, and phenol (50 mg·L^-1). The adsorption process of BPA over BC-900 matched well with the Langmuir isotherm and pseudo-second-order kinetic model. Mechanism investigation suggested that large specific surface area and pore filling acted the foremost role in the adsorption process. Adsorbent BC-900 has the potential application in wastewater treatment due to its simple preparation, low cost, and excellent adsorption efficiency.

Hydrogen Peroxide/Phosphoric Acid Modification of Hydrochars for Sulfamethoxazole and Carbamazepine Adsorption: The Role of Oxygen-Containing Functional Groups

Emerging pollutants, such as sulfonamide antibiotics and pharmaceuticals, have been widely detected in water and soils, posing serious environmental and human health concerns. Thus, it is urgent and necessary to develop a technology for removing them. In this work, a hydrothermal carbonization method was used to prepare the hydrochars (HCs) by pine sawdust with different temperatures. To improve the physicochemical properties of HCs, phosphoric acid (H₃PO₄) and hydrogen peroxide (H₂O₂) were used to modify these HCs, and they were referred to as PHCs and HHCs, respectively. The adsorption of sulfamethoxazole (SMX) and carbamazepine (CBZ) by pristine and modified HCs was investigated systematically. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) results indicated that the H₂O₂/H₃PO₄ modification led to the formation of a disordered carbon structure and abundant pores. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy results suggested that carboxyl (-COOH) and hydroxyl (-OH) functional groups of HCs increased after modification, which is the main reason for the higher sorption of SMX and CBZ on H₃PO₄/H₂O₂-modified HCs when compared with pristine HCs. In addition, the positive correlation between -COOH/C=O and logK_d of these two chemicals also suggested that oxygen-containing functional groups played a crucial role in the sorption of SMX and CBZ. The strong hydrophobic interaction and π-π interaction between CBZ and pristine/modified HCs resulted in its higher adsorption when compared with SMX. The results of this study provide a novel perspective on the investigation of adsorption mechanisms and environmental behaviors for organic contaminants by pristine and modified HCs.

Ultra-efficient adsorption of diclofenac sodium on fish-scale biochar functionalized with H3PO4 via synergistic mechanisms

Developing safe and efficient diclofenac sodium (DS) removal technology has become a critical issue. This study synthesized the fish-scale biochar by co-pyrolysis of fish scale and phosphoric acid (H₃PO₄). In addition to increasing the specific surface area and pore volume of fish-scale biochar, H₃PO₄ assisted in the formation of Graphitic N and sp² C, as well as reacting with C═O groups to form a significant number of phosphorus-containing groups. All these functional groups could act as major active sites for DS adsorption. Adsorption data could well fit pseudo-second-order and Langmuir models. The maximum adsorption capacity of FSB_600-15 for DS was 967.1 mg g^-1, which was much better than that reported in the literature. Under the synergistic effect of various mechanisms (pore-filling effect, electrostatic attraction, H-bonding, π-π, and n-π electron donor-acceptor interactions), the DS ultra-efficient adsorption on FSB_600-15 was realized. Meanwhile, the DS adsorption by FSB_600-15 was an endothermic, spontaneous, and entropy-increasing process. Furthermore, the DS adsorption capacity was more than 426.5 mg g^-1 in the actual water, which was sufficient for practical applications.

NaHCO3 activated sludge-derived biochar by KMnO4 modification for Cd(II) removal from aqueous solutions

The surface flat pristine biochar provides limited adsorption sites for Cd(II) adsorption. To address this issue, a novel sludge-derived biochar (MNBC) was prepared by NaHCO₃ activation and KMnO₄ modification. The batch adsorption experiments illustrated that the maximum adsorption capacity of MNBC was twice that of pristine biochar and reached equilibrium more quickly. The pseudo-second order and Langmuir model were more suitable for analyzing the Cd(II) adsorption process on MNBC. Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl^- and NO^-₃ had no effect on the Cd(II) removal. Cu²⁺ and Pb²⁺ inhibited the Cd(II) removal, while PO^3-₄ and humic acid (HA) promoted it. After 5 repeated experiments, the Cd(II) removal efficiency on MNBC was 90.24%. The Cd(II) removal efficiency of MNBC in different actual water bodies was over 98%. Furthermore, MNBC owned excellent Cd(II) adsorption performance in fixed bed experiments, and the effective treatment capacity was 450 BV. The co-precipitation, complexation, ion exchange and Cd(II)-π interaction were involved in Cd(II) removal mechanism. XPS analysis showed that NaHCO₃ activation and KMnO₄ modification enhanced the complexation ability of MNBC to Cd(II). The results suggested that MNBC can be used as an effective adsorbent for treating of Cd-contaminated wastewater.

Transformation of phosphorus species during phosphoric acid-assisted pyrolysis of lignocellulose

Phosphoric acid-assisted pyrolysis (PAAP) is a pyrolysis technique with potential for the engineered and environmental application. Nevertheless, the volatilisation, immobilisation, and dissolution of phosphorus (P) species have been neglected during PAAP of lignocellulose. Therefore, we compared the transformation of P species with direct-pyrolysis and PAAP system, using multiple techniques including gas chromatography tandem mass spectrometry (GCMS) and ³¹P nuclear magnetic resonance (NMR). It was also investigated that the properties of pyrogenic and modified carbons obtained from lignocellulose pyrolysis at 200-650 °C. As the temperature increased, volatile P species evolved into gas-phase during PAAP, inhibiting the formation of the macromolecular volatile components. Compared with pyrogenic carbons, modified carbons with more aromatic structures experienced a higher degree of dehydration and cyclisation via catalytic crosslinking reaction. PAAP system facilitated more generation of persistent free radical (PFR) below 500 °C and the attenuation of PFR signals was observed at 500-650 °C, which may be associated with the sequestration and elimination of P species between carbon matrix. Notably, three configurations of C₃PO, CPO, and COP were the major combinations of P and C elements on modified carbons. Increased gaseous P and decreased soluble P were observed with elevated temperatures in PAAP system. The species proportion of immobilised P clearly demonstrated the transformation of partial P species from inorganic to organic through pyrolysis. The immobilised P could serve as a potential sustained-release source participating in P biogeochemical cycles. These findings are fundamental for the technical design of lignocellulose pyrolysis.

Hexavalent chromium (Cr(VI)) removal by ball-milled iron-sulfur @biochar based on P-recovery: Enhancement effect and synergy mechanism

After the biochar recovery of phosphorus (P), its role in eliminating Cr(VI) is uncertain. In this study, the iron-sulfur biochar (Fe/S@BC) was made by grinding Fe⁰, S⁰, and biochar with a ball mill. P-loaded iron-sulfur biochar (P-Fe/S@BC) was produced after recovering P from simulated wastewater and then used to remove Cr(VI) contamination in waterbodies. P-Fe/S@BC got a rich pore structure and more reactive sites through P-recovery. The experiments revealed that P-Fe/S@BC had an enhancement effect on Cr(VI) pollution with removal efficiencies of 76.9 % ∼ 99.4 %, all greater than Fe/S@BC (58.2 %). In particular, 25P-Fe/S@BC (with 6.55 mg P/g) had the most significant advantage. The combination of physical adsorption, electrostatic attraction, and precipitation contributed to Cr(VI) removal. This is an efficient strategy for reusing Fe/S@BC followed by P-recovery, intending to improve the Cr(VI) removal effect and achieve the sustainable use of P resources and wastes.

Enhanced Cr (VI) reduction and removal by Fe/Mn oxide biochar composites under acidic simulated wastewater

Chromium (Cr (VI)) can cause severe damage to the ecosystem and humans because of its toxicity. In this paper, the adsorbed Fe/Mn ions Bacillus cereus ZNT-03, lotus seeds, and graphene oxide were co-cultured as the raw materials. Fe/Mn oxide biochar composite (FMBC) was prepared to treat Cr (VI) by one-step pyrolysis. FMBC has high-density micropores, and the average pore size is about 0.82 nm. Fe (II), Mn (II), and N-containing functional groups could serve as electron donors for Cr (VI) reduction. The removal of Cr (VI) is monolayer chemisorption and pH-dependent. The maximum adsorption capacity of FMBC is 21.25 mg g^-1. Cr (VI) is reduced and adsorbed on FMBC by physical adsorption, reduction, complexation, electrostatic attraction, and coprecipitation. The contribution ratio of the reduction mechanism to Cr (VI) is 72.25%. The packed column and regeneration experiments indicated that FMBC had excellent adsorption stability even after soaking in acidic simulated wastewater after 180 days (pH 1.5). These results indicate that FMBC can provide rapid reduction and efficient adsorption for Cr (VI), making it possible to apply in water treatment.

Waste to energy: A review of biochar production with emphasis on mathematical modelling and its applications

United Nations charter to build a sustainable future has paved the way for the introduction of the Sustainability Development Goals (SDGs) at a global forum. In particular, SDG 11 is aligned with the idea of developing cities and communities that provide quality human life, by attaining net-zero discharge and self-sustainability. In line with the efforts of the global community, biochar has emerged as a viable solution due to its ability to convert waste into value. Finding applications in a spectrum of domains, biochar is being studied for use as an adsorbent, a co-catalyst to promote industrial-grade reactions and as a feed for fuel cells. Moreover, the inclusion of biochar as a soil enhancement material advocates the implementation of closed-loop nutrient cycles. Hence, it is imperative to have a proper understanding of the biomass characteristics, the hydrothermal treatment and the process parameters to be adopted for the production of char in order to identify biomass feedstock based on the application. The current work provides insight into the key factors and conditions employed for the production of biochar based on the plethora of applications. In order build a basic framework to aid in the production of char, the development of a statistical correlation was undertaken to determine the feed and optimum process parameters for the production of biochar based on its applications.

Cellulosic Ethanol Production from Weed Biomass Hydrolysate of Vietnamosasa pusilla

Lignocellulosic biomass can be used as a renewable and sustainable energy source to help reduce the consequences of global warming. In the new energy age, the bioconversion of lignocellulosic biomass into green and clean energy displays remarkable potential and makes efficient use of waste. Bioethanol is a biofuel that can diminish reliance on fossil fuels while minimizing carbon emissions and increasing energy efficiency. Various lignocellulosic materials and weed biomass species have been selected as potential alternative energy sources. Vietnamosasa pusilla, a weed belonging to the Poaceae family, contains more than 40% glucan. However, research on the applications of this material is limited. Thus, here we aimed to achieve maximum fermentable glucose recovery and bioethanol production from weed biomass (V. pusilla). To this end, V. pusilla feedstocks were treated with varying concentrations of H₃PO₄ and then subjected to enzymatic hydrolysis. The results indicated that after pretreatment with different concentrations of H₃PO₄, the glucose recovery and digestibility at each concentration were markedly enhanced. Moreover, 87.5% of cellulosic ethanol was obtained from V. pusilla biomass hydrolysate medium without detoxification. Overall, our findings reveal that V. pusilla biomass can be introduced into sugar-based biorefineries to produce biofuels and other valuable chemicals.

Transport of biochar colloids under unsaturated flow condition: Roles of chemical aging and cation type

Biochar colloids released from biochar materials are ubiquitous in the environment and undergo environmental transformation processes that may alter their properties. Natural subsurface environments are usually under unsaturated conditions, which could affect the transport of biochar colloids. This study investigated the transport of pristine and aged biochar colloids under unsaturated conditions by aggregation test, bubble column experiment, and sand column experiment. After aging, the biochar showed a more negative, hydrophilic, and rougher surface. Compared with pristine biochar colloids, aged biochar colloids in NaCl solution were not retained at the air-water interface (AWI) due to their more hydrophilic and rougher surface. In CaCl₂ solution, more pristine and aged biochar colloids were retained at the AWI because Ca²⁺ weakened the electrostatic repulsion between biochar colloids and the AWI. With the decrease in saturation, the transport of pristine and aged biochar colloids decreased by 17 %‑67 % through the retention at AWI and air-water-solid (AWS) interface. The transport of biochar colloids in NaCl solution was increased by 10 %‑20 % after aging as the aged biochar was not retained at the AWI. The difference of transport between pristine and aged biochar colloids in CaCl₂ solution (<8 %) was lower than that in NaCl solution due to the enhanced retention of aggregated biochar colloids at the AWI and AWS interfaces. These results highlight the importance of the surface structure of biochar on its behavior in the environment, which is essential for assessing the potential of biochar application for carbon sequestration and environmental protection.

Chemical modification of biochars as a method to improve its surface properties and efficiency in removing xenobiotics from aqueous media

Biochar (BC) is a carbonaceous material produced by pyrolysis of biomass, applied in various areas such as water purification, fuel production, soil amendment, etc. Many types of BC are characterized by insufficient textural parameters or poor surface chemistry, and hence by low adsorption capacity. This makes innovative chemical methods increasing BC ability to remove xenobiotics from aquatic environments highly needed. Many of them have already been described in the literature. This review presents them in detail and evaluates their effectiveness in improving textural parameters, surface chemistry, and adsorption capacity of BC.

Effect of H3PO4-modified biochar on the fate of atrazine and remediation of bacterial community in atrazine-contaminated soil

The application of chemically modified biochar is a promising strategy for the remediation of contaminated (e.g., pesticides) soil. In this study, H₃PO₄ was used to modify peanut shell to improve the remediation performance of biochar. Surface area (980.19 m²/g), pore volume (0.12 cm³/g), and the functional groups (OH, CO, and phosphorus-containing groups) on the biochar were increased by H₃PO₄ treatment. The sorption experimental data were well fitted by Freundlich model, while the sorption affinity (K_f) of H₃PO₄ modified biochar (PBC) for atrazine was 128 times greater than that of the untreated biochar (BC) in the aquatic systems. The K_f values of PBC-amended soil to atrazine were increased by 13.57 times than that of single soil. The strong sorption of PBC on atrazine delayed the degradation of atrazine in soil, and the residual percentage of atrazine in soil and soil-PBC mixture were 4.90% and 71.44% at the end of 60-day incubation, with the degradation half-life increased from 13.3 to 121.6 d. The analysis of high-throughput sequencing results showed that atrazine reduced the diversity of soil microbial community, but the abundance of microorganisms with degradation function increased and became dominant species. The addition of PBC in soil accelerated the microbial remediation of atrazine stress, which may promote the soil nitrogen cycle. Therefore, amendment of atrazine contaminated soil with PBC can reduce the environmental risk of atrazine and benefit the soil microbial ecology.

Review on carbon-based adsorbents from organic feedstocks for removal of organic contaminants from oil and gas industry process water: Production, adsorption performance and research gaps

Large amounts of process water with considerable concentrations of recalcitrant organic contaminants, such as polycyclic aromatic hydrocarbon (PAHs), phenolic compounds (PCs), and benzene, toluene, ethylbenzene, and xylene (BTEX), are generated by several segments of oil and gas industries. These segments include refineries, hydraulic fracturing (HF), and produced waters from the extraction of shale gas (SGPW), coalbed methane (CBMPW) and oil sands (OSPW). In fact, the concentration of PCs and PAHs in process water from refinery can reach 855 and 742 mg L^-1, respectively. SGPW can contain BTEX at concentrations as high as 778 mg L^-1. Adsorption can effectively target those organic compounds for the remediation of the process water by applying carbon-based adsorbents generated from organic feedstocks. Such organic feedstocks usually come from organic waste materials that would otherwise be conventionally disposed of. The objective of this review paper is to cover the scientific progress in the studies of carbon-based adsorbents from organic feedstocks that were successfully applied for the removal of organic contaminants PAHs, PCs, and BTEX. The contributions of this review paper include the important aspects of (i) production and characterization of carbon-based adsorbents to enhance the efficiency of organic contaminant adsorption, (ii) adsorption properties and mechanisms associated with the engineered adsorbent and expected for certain pollutants, and (iii) research gaps in the field, which could be a guidance for future studies. In terms of production and characterization of materials, standalone pyrolysis or hybrid procedures (pyrolysis associated with chemical activation methods) are the most applied techniques, yielding high surface area and other surface properties that are crucial to the adsorption of organic contaminants. The adsorption of organic compounds on carbonaceous materials performed well at wide range of pH and temperatures and this is desirable considering the pH of process waters. The mechanisms are frequently pore filling, hydrogen bonding, π-π, hydrophobic and electrostatic interactions, and same precursor material can present more than one adsorption mechanism, which can be beneficial to target more than one organic contaminant. Research gaps include the evaluation of engineered adsorbents in terms of competitive adsorption, application of adsorbents in oil and gas industry process water, adsorbent regeneration and reuse studies, and pilot or full-scale applications.

Enhanced removal of Cd2+ from water by AHP-pretreated biochar: Adsorption performance and mechanism

The sesame straw-derived biochar was successfully prepared via alkaline hydrogen peroxide (AHP) pretreatment in this study. Systematic experimental characterizations, 15 relevant batch and column adsorption models, combined with density functional theory (DFT) calculation were used to investigate the performances and micro-mechanisms of Cd²⁺ adsorption onto biochar. We found AHP-pretreatment could greatly improve the adsorption performance of biochar for Cd²⁺. The maximum Cd²⁺ adsorption capacity of AHP-pretreated biochar (87.13 mg g^-1) was much larger than that of unpretreated biochar. Cd²⁺ adsorption was mainly dominated by the chemisorption of the homogeneous surface monolayer. The hydroxyl and carboxyl groups on the surface of biochar provided preferential adsorption sites, and liquid film diffusion and intra-particle diffusion were two dominant rate-controlling steps. Our results showed that ion exchange, co-precipitation, surface complexation, and Cd²⁺-π interaction were the dominant adsorption mechanisms. Especially, DFT calculations well-identified that lone-pair electrons during complexation and π electrons during coordination were provided by oxygen-containing functional groups and aromatic rings, respectively. The experimental breakthrough curves fitted better with the theoretical value of the BJP model, compared to Thomas, Yoon-Nelson, and EXY models. Overall, our study provides a promising method for Cd²⁺ removal from wastewater and resource utilization of agricultural wastes.

Effects of different low temperature pretreatments on properties of corn stover biochar for precursors of sulfonated solid acid catalysts

In this study, the effects of different pretreatment methods including phosphoric acid (PA), freeze drying (FD) and phosphoric acid-freeze drying combined (PA-FD) pretreatment on corn stover characteristics and pyrolysis of corn stover samples was investigated. The results demonstrated that the physiochemical properties of biochars varied significantly. In comparison, PA pretreatment could effectively remove a large portion of inorganics and improve the fuel characteristics. PA-CSB-600 had a greater HHV, lower O/C and H/C ratios, and a lower biochar energy yield (Y_e), indicating the possibility for an attractive fuel source. PA-FD pretreatment would significantly affected cell volume and caused mechanical damage to corn stover structure. As a sulfonated solid acid catalyst precursor, the results of cellulose catalytic hydrolysis indicated that the density of -SO₃H in FD-CSA was much higher than PA-FD-CSA, but lower surface special area. Specifically, PA-FD-CSB prepared at 600 °C resulted in the maximum increase of cellulose conversion by 34.7-81.3%.

Co-Removal Effect and Mechanism of Cr(VI) and Cd(II) by Biochar-Supported Sulfide-Modified Nanoscale Zero-Valent Iron in a Binary System

This study aimed to explore the co-removal effect and mechanism of Cr(VI) and Cd(II) with an optimized synthetic material. The toxicity and accumulation characteristics of Cr(VI) and Cd(II) encountered in wastewater treatment areas present significant challenges. In this work, a rational assembly of sulfide-modified nanoscale zero-valent iron (SnZVI) was introduced into a biochar (BC), and a Cr(VI)–Cd(II) binary system adsorbent with high efficiency was synthesized. When the preparation temperature of the BC was 600 °C, the molar ratio of S/Fe was 0.3, the mass ratio of BC/SnZVI was 1, and the best adsorption capacities of BC-SnZVI for Cr(VI) and Cd(II) in the binary system were 58.87 mg/g and 32.55 mg/g, respectively. In addition, the adsorption mechanism of BC-SnZVI on the Cr(VI)-Cd(II) binary system was revealed in depth by co-removal experiments, indicating that the coexistence of Cd(II) could promote the removal of Cr(VI) by 9.20%, while the coexistence of Cr(VI) could inhibit the removal of Cd(II) by 43.47%. This work provides a new pathway for the adsorption of Cr(VI) and Cd(II) in binary systems, suggesting that BC-SnZVI shows great potential for the co-removal of Cr(VI) and Cd(II) in wastewater.

A Review on Production and Surface Modifications of Biochar Materials via Biomass Pyrolysis Process for Supercapacitor Applications

Biochar (BC) based materials are solid carbon enriched materials produced via different thermochemical techniques such as pyrolysis. However, the non-modified/non-activated BC-based materials obtained from the low-temperature pyrolysis of biomass cannot perform well in energy storage applications due to the mismatched physicochemical and electrical properties such as low surface area, poor pore features, and low density and conductivity. Therefore, to improve the surface features and structure of the BC and surface functionalities, surface modifications and activations are introduced to improve its properties to achieve enhanced electrochemical performance. The surface modifications use various activation methods to modify the surface properties of BC to achieve enhanced performance for supercapacitors in energy storage applications. This article provides a detailed review of surface modification methods and the application of modified BC to be used for the synthesis of electrodes for supercapacitors. The effect of those activation methods on physicochemical and electrical properties is critically presented. Finally, the research gap and future prospects are also elucidated.

Preparation and evaluation of a chitosan modified biochar as an efficient adsorbent for pipette tip-solid phase extraction of triazine herbicides from rice

The low allowable limit of triazine herbicides (THs) in rice makes it imperative to develop novel sample pretreatment methods for extraction and preconcentration of THs. Herein, a phosphoric acid activated biochar (PBC) was prepared and modified by chitosan (CS). For THs with different polarities, CS-PBC with multiple interaction sites exhibited satisfactory chemisorption. On this basis, a CS-PBC-based pipette tip-solid phase extraction (PT-SPE) was developed combined with HPLC to extract THs from rice. Low limits of detection (1.41-3.35 ng g^-1), satisfactory linearity (0.01-2.00 μg g^-1, R² > 0.9974) and recoveries (96.13-116.25 %) were obtained with acceptable inter-day and intra-day precision (RSD ≤ 13.60 %). CS-PBC showed superior performance to three commercial single-mode adsorbents and comparable results to a hydrophilic-lipophilic balance adsorbent. The study explored the feasibility of PT-SPE for extracting THs from rice and broadened the application of plant biochar as an environmentally-friendly matrix in food sample pretreatment.

Low-temperature straw biochar: Sustainable approach for sustaining higher survival of B. megaterium and managing phosphorus deficiency in the soil

Inoculation of phosphate-solubilizing bacteria (PSB) is a sustainable approach to increase the available P content in soils for crop production. This application, however, is constrained by the low survival rate of PSB in the field. Biochar, a carbon-rich biomaterial with a well-developed porous structure, has recently emerged as an appealing option to maintain the population size of inoculants in the soil. The efficacy of biochar as a PSB carrier is primarily determined by its physicochemical properties, which are dominated by the feedstocks and the pyrolysis temperatures. This study demonstrated a comprehensive assessment of the efficacy of straw-derived biochars prepared from different feedstocks (i.e., crop straws from cotton, peanut, maize, soybean, and wheat) and pyrolysis temperatures (i.e., 300 and 600 °C). We employed B. megaterium carrying green fluorescence protein and evaluated its survival rate and phosphate-solubilizing performance in various inoculated biochars that have distinct physicochemical properties. Our results showed that the pyrolysis temperature is more determinant of the beneficial effect of straw biochar than the feedstock species. Cotton straw biochar pyrolyzed at low temperature (i.e., 300 °C) sustained a survival rate of 6.17% for the B. megaterium and thereby entailed a significant increase in available P in soil by 30.05 mg kg^-1 soil, which were nearly 18-fold and 8-fold higher than that of the no carrier treatment respectively. The performance of biochar-assisted PSB was dominant-negatively affected by the increasing pH, ash content, surface area, and total pore volume of biochar, while larger H/C ratio, water holding capacity, pore size, and surface hydrophobicity were predominantly conducive to the colonization and survival of PSB. The results of this study were expected to provide valuable guidance for biochar preparation in practice to enhance the survival and activity of PSB and maximize the utility of PSB as sustainable phosphorus fertilizer with economic applicability.

Biochar produced by combining lignocellulosic feedstock and mushroom reduces its heterogeneity

To reduce the feedstock-sourced heterogeneity of biochar, mushrooms, cultivated from lignocellulosic feedstocks (LFs), were used as precursors for biochar preparation. The coefficient of variation (CV) was adopted to show the homogeneity changes. In contrast to LFs, mushrooms produced relatively lower CVs in terms of elemental and proximate analysis. Furthermore, the CV of H/C (9.20%) and O/C (13.32%) of mushroom-based biochars (MRBCs) was lower than that of LF-based biochars (LFBCs), suggesting more homogeneous aromaticity and hydrophilicity. The relatively lower CV of the volatile matter (0.87%), fixed carbon (0.45%), and ash (2.44%) of MRBCs suggested an improvement in the homogeneity of chemical components. The homogenized physical structure was reflected in the lack of a difference in pore characteristics of MRBCs. The lower CVs (1.89-14.82%) for the pollutant adsorption of MRBCs, implied more stable performance. In conclusion, converting LFs to mushrooms reduced the precursor's heterogeneity, consequently homogenizing the biochar's properties and performance.

Exploring the potential effect of Achnatherum splendens L.-derived biochar treated with phosphoric acid on bioavailability of cadmium and wheat growth in contaminated soil

Biochar remediation efficiency could be enhanced through numerous treatments such as acids treatment. Still, there has little work done on H₃PO₄-treated biochar particularly biochar derived from Achnatherum splendens L. feedstock. Therefore, the present study has been conducted to further explore the potential effect of A. splendens L.-derived biochar treated with H₃PO₄ on bioavailability of Cd and wheat growth in Cd contaminated soil. Phosphoric acid and untreated biochar each applied at the rate of 1% and 2% to Cd contaminated/spiked soil in pots and having one contaminated/spiked control without biochars amendment. The results show that 2% phosphoric acid-treated biochar has the most significant increase in plant height, shoot dry weight, and grain yield of wheat as compared to contaminated control. As compared to contaminated control, maximum improvement in total chlorophyll contents, photosynthetic rate, transpiration rate, and stomatal conductance occurred with 2% phosphoric acid-treated biochar. The 2% phosphoric acid-treated biochar also declined bioavailable Cd in soil by 53%, and its accumulation in shoot and grain by 65% and 90%, respectively, compared to contaminated control. Overall, phosphoric acid-treated biochar most effectively immobilized Cd in soil and reducing its uptake and translocation to grains. Therefore, A. splendens L.-derived biochar treated with phosphoric acid could be successfully utilized for remediation of contaminated soil.

Design of nitrogen-phosphorus-doped biochar and its lead adsorption performance

The surface properties of the adsorbents and the acidic environment have an influence effect on Pb adsorption. In order to further improve the adsorption performance of biochar, we herein reported an effective method to synthesize high-adsorbed biochar by co-doping with nitrogen and phosphorus. After atom doping, the N/P co-doped biochar (NP-BC) showed the enhanced adsorption capacity for lead ion (Pb²⁺). The adsorption kinetics, isotherm, pH value, and influencing factors were studied. The results show that the synthesized NP-BC has high Pb²⁺ adsorption capacity in aqueous solution, and can be maintained with various environmental interference factors including pH, natural organic matter, and other metal ions. High adsorption performance shows that the material may be well used to remove Pb²⁺ in various water bodies. Various characterization experiments prove that surface properties contribute to Pb²⁺ adsorption, and the high performance of NP-BC is mainly due to the surface complexation between functional groups and Pb²⁺. This work demonstrates that the surface functional groups of biochar are critical to the development of high-performance heavy metal adsorbents.

Heterogeneous compositions of oxygen-containing functional groups on biochars and their different roles in rhodamine B degradation

The reactivity of pyrogenic carbon has attracted a great deal of research attentions recently. The oxygen-containing structures are rich on the surface of biochars, and involved in accepting and donating electrons during the interactions between biochar and organic contaminants. In this work, the species and content of oxygen-containing functional groups on biochar surface were regulated through chemical modification, and batch sorption/degradation experiments were carried out for rhodamine B (RhB). Based on the comparison of surface functional groups, biochars produced below 200 °C mediated RhB degradation through phenol hydroxyl group, while semiquinone and carboxylic acid groups were the main reaction active sites for biochars produced at higher than 500 °C. Considering that various biochar properties play roles in mediating organics degradation, the strategies in manipulating biochar properties should be carefully considered.