Electrochemical removal of Terbuthylazine:Boron-Doped Diamond anode coupled with solid polymer electrolyte

Effects of terbuthylazine on myocardial oxidative stress and ferroptosis via Nrf2/HO-1 signaling pathway in broilers

Terbuthylazine (TBA) is one of the most commonly used and effective herbicides. However, due to its affinity for soil organic matter and water solubility, TBA can lead to biological health concerns. This study exposed broilers to TBA (0 mg/kg bw, 0.4 mg/kg bw, 4 mg/kg bw) for 28 days. The results showed significant pathological damage in broiler myocardial tissue, such as widening of the interstitial space, rupture of muscle fibers, and deposition of myocardial collagen fibers. In addition, Under the 0.4 mg/kg bw TBA exposure, myocardial oxidative stress was observed in broilers, which was accompanied by the activation of Nrf2/HO-1 pathway and the increased protein and mRNA levels of NQO1, NOX2 and SOD2 antioxidant enzymes. However, Nrf2/HO-1 protein and mRNA levels were reversed at 4 mg/kg bw TBA exposure. Meanwhile, the Nrf2/HO-1 mediated antioxidant defense was impaired. In contrast with the low dose, the protein and gene expression levels of NQO1, NOX2, and SOD2 were reduced in 4 mg/kg bw TBA group. The expression of GPX4 and SLC7A11 was significantly downregulated at both protein and mRNA levels. Beyond that, ACSL4 expression was significantly up-regulated, and the protein result was consistent with the mRNA expression, demonstrating the occurrence of ferroptosis. In general, TBA exposure activated the Nrf2/HO-1 pathway, resulting in ferroptosis. This study links ferroptosis to the Nrf2/HO-1 pathway, providing new insights into the potential role of TBA in myocardial toxicity.

Degradation pathways of atrazine by electrochemical oxidation at different current densities: Identifications from compound-specific isotope analysis and DFT calculation

Current density was the key factor that impacted pollutant degradation by electrochemical oxidation, and reaction contributions at various current densities were non-negligible for the cost-effective treatments of organic pollutants. This research introduced compound specific isotope analysis (CSIA) into atrazine (ATZ) degradation by boron doped diamond (BDD) with current density of 2.5-20 mA/cm², in order to provide "in-situ" and "fingerprint" analysis of reaction contributions with changed current densities. As results, the increased current density displayed a positive impact on ATZ removal. The Ʌ_C/H values (correlations of Δδ¹³C and Δδ²H) were 24.58, 9.18 and 8.74 when current densities were 20, 4, and 2.5 mA/cm², with ·OH contribution of 93.5%, 77.2% and 80.35%, respectively. While DET process favored lower current density with contribution rates up to ∼20%. What's more interesting, though the carbon and hydrogen isotope enrichment factors (ε_C and ε_H) were fluctuate, the Ʌ_C/H linearly increased accompanied with applied current densities. Therefore, increasing current density was effective due to the larger ·OH contribution even though side reactions may occur. DFT calculations proved the increase of C-Cl bond length and the delocalization of Cl atom, confirming dechlorination reaction mainly occurred in the direct electron transfer process. While ·OH radical mainly attack the C-N bond on the side chain, which was more benefit to the fast decomposition of ATZ molecule and intermediates. It was forceful to discuss pollutant degradation mechanism by combining CSIA and DFT calculations. Target bond cleavage (i.e., dehalogenation reaction) can be conducted by changing reaction conditions like current density due to the significantly different isotope fractionation and bond cleavage.

A facile green "wastes-treat-wastes" strategy: Electrogenerated chloramines for nanofiltration concentrate recirculation

Use of nanofiltration (NF) membrane to reuse the secondary wastewater suffers from severer biofouling and refractory concentrate. To realize sustainable NF membrane processes in water purification, the electro-oxidation (EO) process using boron-doped diamond (BDD) anodes was applied in current study to treat the NF concentrate for removal of organic contaminates and nutrients using simultaneously controllable in-situ generation of chloramines. The electrolytic effluent would be mixed with the raw secondary wastewater as the feed of subsequent NF process for conducting chloramination to mitigate membrane biofouling. It was found that under a constant current density of 30 mA/cm², the chloramine formed with the electrolysis while its concentration reached the maximum at 30 min of electrolysis when NH₃-N was 7 mg/L and Cl^- concentration was below 500 mg/L. The complete elimination of antibiotics and bacteria can be attained in the hybrid NF-EO process thanks to the in-situ simultaneous generation of large amount of chloramine. In particular, the membrane biofouling was effectively alleviated to maintain a stable permeate flux during the 160-h period of sustainable operation. Our study provides a promising "wastes-treat-wastes" strategy for sustainable reuse of secondary wastewater.

Comparative Effect of UV, UV/H2O2 and UV/H2O2/Fe on Terbuthylazine Degradation in Natural and Ultrapure Water

Different advanced oxidation processes (AOPs) (ultraviolet radiation, hydrogen peroxide photolysis and photo-Fenton) were applied to test the degradation of terbuthylazine in three types of water: (a) ultrapure water, (b) surface water from the Gaditana area (Los Hurones reservoir, Cádiz, Spain) and (c) groundwater from the Tempul spring in Jerez de la Frontera (Cádiz, Spain). The experiments were carried out on a laboratory scale, using two different types of reactors, batch and semi-continuous. In batch reactors, the most efficient process for the experiments carried out with both ultrapure water and underground groundwater was ultraviolet radiation, whereas for surface water from the Gaditana area, the process that obtained the best results was the photolysis of hydrogen peroxide with 2.5 mg L-1 of H2O2. In semi-continuous reactors, the most efficient process was the photolysis of hydrogen peroxide with 2.5 mg L-1 of H2O2 for all the matrices studied. In both types of reactors, terbuthylazine degradation percentages higher than 90% were achieved; the main difference was in the reaction time, which varied from minutes in the batch reactor to seconds in the semi-continuous reactor. In all the applied AOPs, N-terbutyl-6-hydroxy-N'ethyl-1,3,5-triazine-2,4-diamine (TBA-212) was generated as a reaction intermediate.

Electro-peroxone with solid polymer electrolytes: A novel system for degradation of plasticizers in natural effluents

Electro-peroxone (EP) reaction has been considered as a promising process for real effluent treatments. However, the use of the technology in natural water conditions is limited by low electrical conductivity and high operating costs. Herein, a novel electrochemical system was designed to overcome this constrain by coupling EP with a solid polymer electrolyte (EP-SPE). Performances of EP-SPE system were thoroughly evaluated by comparing the decomposition and energy efficiencies of various plasticizers in different systems. The EP-SPE system achieved 50% of pollutants mineralization in only 10 min with the electrolysis energy consumption of 1.0kWh·m^-3, While the conventional EP system (not) adding salt compounds (CEP-(N) AS) need 30 (60) min to reach 50% of pollutants mineralization with 3.8(26.6)kWh·m^-3. Kinetics and mechanisms of EP-SPE were investigated in detail, while electronic paramagnetic resonance (EPR) detection and kinetic model revealed the occurrence, transient concentration and degradation contribution of reactive oxidizing species (ROS). Furthermore, tests of variety of SPEs and natural waters demonstrated universal applicability of EP-SPE. Additionally, EP-SPE did not show any performance deterioration after 15 runs. Therefore, this work provides a feasible technology for plasticizer purification in natural water.

Removal of endocrine disrupters from the contaminated environment: public health concerns, treatment strategies and future perspectives - A review

Endocrine-disrupting compounds (EDCs) are emerging contaminants of concern (ECC) that disturb endocrine hormones and system functionality even at very low concentrations (i.e. μg/L or ng/L levels). Hence, EDCs are found in all components of the environment including surface and groundwater, wastewater, soil, outdoor and indoor air and in the contaminated foods from a variety of sources (run off from agricultural activities, sewage treatment plants, leakage from septic tanks etc.), and the effects are more severe as the majority of EDCs do not have standard regulations. The environmental mobility of EDCs is higher as conventional wastewater treatment does not degrade efficiently and the development of effective and sustainable removal technologies specifically designed for the removal of those emerging micropollutants is essential. Accordingly, EDCs cause various public health diseases such as reproductive abnormalities, obesity, various cancer types, cardiovascular risks, metabolic disorders, epigenetic alterations, autism, etc. This paper reviews the existing and emerging treatment technologies for the removal of phenolic based EDCs, such as natural estrogens (estrone (E1), 17β-estradiol (E2), estriol (E3)), synthetic estrogen 17α-ethinylestradiol (EE2) and phenolic xenoestrogens (4-nonyl phenols (4-NP) and bisphenol-A (BPA)) from the contaminated environment. These includes advanced oxidation processes (AOP), adsorption processes, membrane based filtration, bioremediation, phytoremediation and other integrated approaches. The sustainability of EDCs removal can be assured through the use of combined processes (i.e. low-cost - biological and adsorption methods with efficient and costly - AOPs) techniques through system integration to achieve better removal efficiency than using a single treatment technique. Besides, the public health concerns and future research perspectives of EDCs are also highlighted.

A Simple Device for the On-Site Photodegradation of Pesticide Mixes Remnants to Avoid Environmental Point Pollution

The worldwide increase in the number and use of agrochemicals impacts nearby soil and freshwater ecosystems. Beyond the excess in applications and dosages, the inadequate management of remnants and the rinsing water of containers and application equipment worsen this problem, creating point sources of pollution. Advanced oxidation processes (AOPs) such as photocatalytic and photo-oxidation processes have been successfully applied in degrading organic pollutants. We developed a simple prototype to be used at farms for quickly degrading pesticides in water solutions by exploiting a UV–H2O2-mediated AOP. As representative compounds, we selected the insecticide imidacloprid, the herbicide terbuthylazine, and the fungicide azoxystrobin, all in their commercial formulation. The device efficiency was investigated through the disappearance of the parent molecule and the degree of mineralization. The toxicity of the pesticide solutions, before and during the treatment, was assessed by Vibrio fischeri and Pseudokirchneriella subcapitata inhibition assays. The results obtained have demonstrated a cost-effective, viable alternative for detoxifying the pesticide solutions before their disposal into the environment, even though the compounds, or their photoproducts, showed different sensitivities to physicochemical degradation. The bioassays revealed changes in the inhibitory effects on the organisms in agreement with the analytical data.

Chlorpyrifos removal: Nb/boron-doped diamond anode coupled with solid polymer electrolyte and ultrasound irradiation

Chlorpyrifos is an organophosphorus insecticide, acaricide and miticide used worldwide for the control of soil-borne insect pests. It must be considered as a substance of growing concern, given its use, toxicity, environmental occurrence, and potential for regional to long-range atmospheric transport. Considering the incomplete removal attained by conventional water treatment processes, we investigated the efficiency of electrolytic radicals production and sonoelectrolysis on the degradation of the pesticide. The treatment has been conducted in a novel electrochemical reactor, equipped with a boron-doped diamond anode and a solid polymer electrolyte (SPE). Different current intensity and times have been tested and coupled with sonication at 40 kHz. Up to 69% of chlorpyrifos was completely removed in 10 min by electrolysis operated at 0.1 mA, while 12.5% and 5.4% was converted into the treatment intermediates 3,5,6-trichloro-2-pyridinol (TCP) and diethyl (3,5,6-trichloropyridin-2-yl) phosphate, respectively. Ultrasound irradiation did not enhance the removal efficiency, likely due to mass transport limitations, while the energy consumption increased from 8.68∙10- 6 to 9.34∙10- 4 kWh µg- 1 removed. Further research is encouraged, given the promising processing by the SPE technology of low conductivity solutions, as pharmaceuticals streams, as well as the potential for water and in-situ groundwater remediation from different emerging pollutants as phytosanitary and personal care products.

Emerging pollutants-Part II: Treatment

Emerging pollutants (EPs) refer to a class of pollutants, which are emerging in the environment or recently attracted attention. EPs mainly include pharmaceutical and personal care products (PPCPs), endocrine-disrupting chemicals (EDCs), and antibiotic resistance genes (ARGs). EPs have potential threats to human health and ecological environment. In recent years, the continuous detections of EPs in surface and ground water have brought huge challenges to water treatment and also made the treatment of EPs become an international research hotspot. This paper summarizes some research results on EPs treatment published in 2019. This paper may be helpful to understand the current situations and development trends of EP treatment technologies.

The synergic persulfate-sodium dodecyl sulfate effect during the electro-oxidation of caffeine using active and non-active anodes

It has previously been established during the elimination of organic matter that the addition of sodium dodecyl sulfate in solution is an important condition in the electrochemical oxidation approach that allows to increase the production of persulfate, enhancing the efficacy of the treatment. This outcome was observed when using the anodic oxidation with boron doped diamond (BDD), the extra production of persulfate was achieved after the SDS-sulfate released in solution and it reacts with hydroxyl radicals electrogenerated at BDD surface. However, this effect was not already tested by using active anodes. For this reason, the effect of sodium dodecyl sulfate (SDS) during the electrochemical treatment of caffeine was investigated by comparing non-active and active anodes performances. A significant decrease on the oxidation efficiency of caffeine was observed by using Ti/IrO₂-Ta₂O₅ anode at high current density when SDS was added to the solution. Conversely, at BDD anode, the presence of SDS enhanced the degradation efficiency, depending on the applied current density. This behavior is mainly due to the degradation of SDS molecules, which allows to increase the amount of sulfate in solution, promoting the production of persulfate via the mechanism involving hydroxyl radicals when BDD is used. Meanwhile, no oxidation improvements were observed when Ti/IrO₂-Ta₂O₅ anode was employed, limiting the caffeine oxidation. Results clearly showed that the surfactant concentration had little influence on the degradation efficiency, but this result is satisfactory for the BDD system, since it demonstrates that effluents with complex matrices containing surfactants could be effectively degraded using the electrooxidation technique. Degradation mechanisms were explained by electrochemical measurements (polarization curves) as well as the kinetic analysis. Costs and energy consumption were also evaluated.