Mechanistic insight into the adsorption of diclofenac by MIL-100: Experiments and theoretical calculations

Removal of organic pollutants through hydroxyl radical-based advanced oxidation processes

The use of Advance Oxidation Process (AOPs) has been extensively examined in order to eradicate organic pollutants. This review assesses the efficacy of photolysis, O3 based (O3/UV, O3/H2O2, O3/H2O2/UV, H2O2/UV, Fenton, Fenton-like, hetero-system) and sonochemical and electro-oxidative AOPs in this regard. The main purpose of this review and some suggestions for the advancement of AOPs is to facilitate the elimination of toxic organic pollutants. Initially proposed for the purification of drinking water in 1980, AOPs have since been employed for various wastewater treatments. AOPs technologies are essentially a process intensification through the use of hybrid methods for wastewater treatment, which generate large amounts of hydroxyl (•OH) and sulfate (SO4·-) radicals, the ultimate oxidants for the remediation of organic pollutants. This review covers the use of AOPs and ozone or UV treatment in combination to create a powerful method of wastewater treatment. This novel approach has been demonstrated to be highly effective, with the acceleration of the oxidation process through Fenton reaction and photocatalytic oxidation technologies. It is clear that Advance Oxidation Process are a helpful for the degradation of organic toxic compounds. Additionally, other processes such as •OH and SO4·- radical-based oxidation may also arise during AOPs treatment and contribute to the reduction of target organic pollutants. This review summarizes the current development of AOPs treatment of wastewater organic pollutants.

Valorization of a poultry industry floated sludge as a raw material to produce char and activated carbon for pharmaceutical compounds adsorption

This study was intended to valorize a floated sludge of a poultry slaughterhouse using it as a precursor to producing char and activated carbon, which were tested as adsorbents in removing ketoprofen and diclofenac sodium from the water. The addition of zinc chloride or calcium hydroxide was determinant for forming a porous carbonaceous structure with a high surface area in AC-FSP (656.54 m2 g-1), differently from that exhibited by the CHAR-FSP (8.11 m2 g-1). Kinetic and equilibrium studies indicated that the pseudo-second-order and the Sips models were suitable. The AC- FSP maximum adsorption capacity for ketoprofen and diclofenac sodium was 124.98 mg g-1 and 138.32 mg g-1, respectively. The adsorption was a spontaneous and endothermic process. It was concluded that AC-FSP is a more efficient and promising adsorbent than CHAR-FSP for the adsorption of drugs in contaminated wastewater. In addition, AC-FSP can be reused, maintaining good adsorption levels for about 5 cycles. Therefore, this study is aligned with the 2030 Agenda for global sustainability since converting waste (valueless) into an adsorbent is also directly linked to the circular economy and neutral carbon.

Removal of diclofenac by adsorption process studied in free-base porphyrin Zr-metal organic frameworks (Zr-MOFs)

As the world population continues to grow, there is also a rising concern regarding water pollution since this condition could negatively impact the supply of clean water. One of the most recent concerns is related to the pollution that comes from various pharmaceuticals, in particular non-steroidal anti-inflammatory drugs (NSAIDs) since they have been industrially produced at large scale and can be easily purchased as an over-the-counter medicine. Diclofenac is one of the most popular NSAIDs because of its high-effectiveness, which leads to its excessive consumption. Consequently, its presence in water bodies is also continuously increasing. An adsorption process could then be employed as a highly effective method to address this issue. In comparison to other conventional adsorbents such as activated carbon, the use of metal-organic frameworks (MOFs) as an alternative adsorbent is very attractive since it can offer various advantages such as tailorability and high adsorption capacity. In this study, the performance of three water-stable, free-base porphyrin MOFs assembled using zirconia-based nodes, namely MOF-525, MOF-545, and NU-902, for diclofenac adsorption was thoroughly investigated. Interestingly, although all three free-base porphyrin MOFs are assembled using the same building block and have a similar specific surface area (based on the experimental argon physisorption and calculation based on non-localized density functional theory), their diclofenac adsorption capacity is substantially different from one another. It is found that the highest diclofenac adsorption capacity is shown by MOF-525, which has maximum capacity around 792 mg g^-1. This is then followed by MOF-545 and NU-902 that have adsorption capacities around 591 and 486 mg g^-1, respectively. Some possible adsorption mechanisms are then thoroughly discussed that might contribute to this phenomenon. Lastly, their performance is also compared with other MOFs that are also studied for this purpose to show their performance superiority not only in terms of adsorption capacity but also their affinity towards the diclofenac molecule, which might be useful as an adsorption performance indicator in the real condition where the contaminant concentration is considerably low.

Recent perspective of antibiotics remediation: A review of the principles, mechanisms, and chemistry controlling remediation from aqueous media

Antibiotic pollution is an ever-growing concern that affects the growth of plants and the well-being of animals and humans. Research on antibiotics remediation from aqueous media has grown over the years and previous reviews have highlighted recent advances in antibiotics remediation technologies, perspectives on antibiotics ecotoxicity, and the development of antibiotic-resistant genes. Nevertheless, the relationship between antibiotics solution chemistry, remediation technology, and the interactions between antibiotics and adsorbents at the molecular level is still elusive. Thus, this review summarizes recent literature on antibiotics remediation from aqueous media and the adsorption perspective. The review discusses the principles, mechanisms, and solution chemistry of antibiotics and how they affect remediation and the type of adsorbents used for antibiotic adsorption processes. The literature analysis revealed that: (i) Although antibiotics extraction and detection techniques have evolved from single-substrate-oriented to multi-substrates-oriented detection technologies, antibiotics pollution remains a great danger to the environment due to its trace level; (ii) Some of the most effective antibiotic remediation technologies are still at the laboratory scale. Thus, upscaling these technologies to field level will require funding, which brings in more constraints and doubts patterning to whether the technology will achieve the same performance as in the laboratory; and (iii) Adsorption technologies remain the most affordable for antibiotic remediation. However, the recent trends show more focus on developing high-end adsorbents which are expensive and sometimes less efficient compared to existing adsorbents. Thus, more research needs to focus on developing cheaper and less complex adsorbents from readily available raw materials. This review will be beneficial to stakeholders, researchers, and public health professionals for the efficient management of antibiotics for a refined decision.

The interaction mechanism of polystyrene microplastics with pharmaceuticals and personal care products

Microplastics (MPs) have been detected in the hydrosphere, with hazardous implications in transporting coexisting water pollutants. Our knowledge about the interaction mechanisms that MPs establish with organic pollutants are still growing, which is essential to understand the adsorption properties of MPs and their relative stability with adsorbates. Here, we used classical (force field methods) and ab-initio (density functional theory) computational chemistry tools to characterize the interaction mechanisms between Polystyrene-MPs (PS-MPs) and pharmaceuticals/personal care products (PPCPs). Adsorption conformations and energies, thermochemistry, binding, and energy decomposition analyses were performed to obtain the quantitative mechanistic information. Our results show that PS-MPs have permanent dipoles, increasing the interaction with neutral PPCPs while repelling the charged pollutants; in all cases, a stable physisorption takes place. Moreover, PS-MPs increase their solubility upon pollutant adsorption due to an increase in the dipole moment, increasing their co-transport ability in aqueous environments. The stability of the PS-MPs/PPCPs complexes is further confirmed by thermochemical and molecular dynamics trajectory analysis as a function of temperature and pressure. The interaction mechanism of high pKa pollutants (pKa > 5) is due to a balanced contribution of electrostatic and dispersion forces, while the adsorption of low pKa pollutants (pKa < 5) maximizes the electrostatic forces, and steric repulsion effects explain their relative lower adsorption stability. In this regard, several pairwise intermolecular interactions are recognized as a source of stabilization in the PS-MPs/PPCPs binding: hydrogen bonding, π-π, OH⋯π, and CH⋯π, CCl⋯CH and CH⋯CH interactions. The ionic strength in solution slightly affects the adsorption stability of neutral PPCPs, while the sorption of charged pollutants is enhanced. This mechanistic information provides quantitative data for a better understanding of the interactions between organic pollutants and MPs, serving as valuable information for sorption/kinetic studies.

Surface ion-imprinted brewer's spent grain with low template loading for selective uranyl ions adsorption from simulated wastewater

Efficient removal of uranyl ions from wastewater requires excellent selectivity of the adsorbents. Herein, we report a new strategy using a high monomer/template molar ratio of 500:1 to prepare surface ion-imprinted brewer's spent grain (IIP-BSG) for selective U(VI) removal using binary functional monomers (2-hydroxyethyl methacrylate and diethyl vinylphosphonate) with high site accessibility and easy template removal. IIP-BSG exhibits a maximum U(VI) adsorption capacity of 165.7 mg/g, a high selectivity toward U(VI) in the presence of an excess amount of Eu(III) (Eu/U molar ratio = 20), a good tolerance of salinity, and a high reusability. In addition, mechanism studies have revealed electrostatic interaction and a coordination of uranyl ions by carboxyl and phosphoryl groups, the predominant contribution of high-energy (specific) sites during selective adsorption, and internal mass transfer as the rate-controlling step of U(VI) adsorption. Furthermore, IIP-BSG shows great potentials to separate U(VI) from lanthanides in simulated nuclear wastewater (pH₀ = 3.5) and selectively concentrate U(VI) from simulated mine water (pH₀ = 7.1). This study proves that the ion-imprinting effect can be achieved using a very low template amount with reduced production cost and secondary pollution, which benefits large-scale promotion of the ion-imprinted materials for selective uranyl ions removal.

Enhanced removal of P(V), Mo(VI) and W(VI) generated oxyanions using Fe-MOF as adsorbent from hydrometallurgical waste liquid: Exploring the influence of ionic polymerization

Environmentally hazardous P(V), Mo(VI) and W(VI) generated oxyanions exist widely in the waste liquid of nonferrous hydrometallurgy. In this work, Fe-MOF material was simply prepared via solvothermal synthesis and then used as an adsorbent to remove P(V), Mo(VI) and W(VI) oxyanions from hydrometallurgical waste liquid. Several important parameters, including solution pH, oxyanion concentration, contact time, adsorbent amount, temperature and coexistent heavy metal ions, were systematically investigated. The results demonstrate that adsorption process was almost pH-independent over a broad range of pH 3.0-10.0. The adsorption efficiency was strongly associated with the chemical species of oxyanions. The higher polymerisation degree of oxyanions was more favourable for removal efficiency. Additionally, the maximum removal efficiencies for P(V), Mo(VI) and W(VI) oxyanions under optimum conditions were approximately 100%. Furthermore, the adsorption kinetics and isotherms of oxyanions on the adsorbent separately belonged to the pseudo-second-order and Langmuir isotherm models. XPS analysis revealed that inner-sphere complexation played a dominant role in the adsorption removal process. Fe-MOFs with pH-independent properties, abundant binding sites and high stability are prospective adsorbents for treating waste liquids in the hydrometallurgical industry.

A critical review of various adsorbents for selective removal of nitrate from water: Structure, performance and mechanism

Nitrate is ubiquitous pollutant due to its high water solubility, usually contributing to eutrophication, and posing a threat to aquatic ecosystem and human health. Adsorption approach has been widely used for nitrate removal because of the simplicity, easy operation, and low cost. Adsorbent plays a key role in the adsorptive removal of nitrate. The adsorption performance and adsorption mechanism are determined by the structural feature of adsorbent that is dependent on the preparation method. In this review, various types of adsorbents for nitrate removal were systematically summarized, their preparation, characterization, and adsorption performance were evaluated; the factors influencing the nitrate adsorption performance were discussed; the adsorption isotherm models, kinetic models and thermodynamic parameters were examined; and the possible adsorption mechanisms responsible for nitrate adsorption were categorized; the possible correlation of adsorbent structure to adsorption performance and adsorption mechanism were explained; the potential applications of adsorbents were discussed; finally, the strategies for improving adsorption capacity and selectivity towards nitrate, the challenges and future perspectives for developing novel adsorbent were also proposed. This review will deepen the understanding of nitrate removal by adsorption process and help the development of high-performance adsorbents for selective nitrate removal from water and wastewater.

Highly efficient removal of quinolones by using the easily reusable MOF derived-carbon

As anthropogenic antibiotics, quinolones, e.g., ofloxacin have adverse impacts on ecological systems and human heaths. The removal of quinolones is of great importance, and adsorption techniques have been widely used to remove this hazardous contaminant. However, a robust and easy-operating adsorbent is still emergently required due to the complex chemical structure of quinolones. In this study, we successfully synthesized the promising metallic carbons (MCs) containing carbon nanotubes and cobalt nanoparticles by carbonizing Zn/Co-ZIF at 900 °C. Three different molar ratios of Co and Zn were applied to optimize the adsorption capacity on ofloxacin (OFL). Results showed MC with molar ratio of Co and Zn at 3:1 (Co-CNT/NPC_3/1) achieved the maximal adsorption capacity to 118.3 mg g^-1. Its adsorption performance was satisfied in the pH range from 5 to 9 and ionic strengths at 0.01 M. The main mechanisms for these adsorptions were identified as electrostatic attraction, metal coordination and π-π EDA. Removal efficiencies of quinolones higher than 68 mg g^-1 indicated the strong feasibility of this adsorbent for wastewater treatments. The regeneration of Co-CNT/NPC_3/1 at 600 °C allowed its at least 4-time reusability and its magnetic property enabled external magnets to recycle it from real environments.

Surface imprinted polymer on a metal-organic framework for rapid and highly selective adsorption of sulfamethoxazole in environmental samples

The demand for the removal of pollutants in aqueous solution has triggered extensive studies to optimize the performance of adsorbents, but the adsorption rate and selectivity of adsorbents have been overlooked. Hierarchically ordered porous vinyl-functionalized UIO-66 was used as supporter to prepare a surface molecular imprinted polymer (MIP-IL@UIO-66). The UIO-66 with large specific surface area significantly increased the number of active site of polymer, and so the MIP-IL@UIO-66 can achieve the rapid and highly selective adsorption of sulfamethoxazole (SMZ) in water. The structure and morphology of MIP-IL@UIO-66 was examined using scanning electron microscopy, Fourier transform infrared spectroscopy, nitrogen adsorption-desorption isotherms, thermogravimetry, X-ray photoelectron spectroscopy, and X-ray powder diffraction. Results indicate that the presented MIP-IL@UIO-66 has an ultrafast equilibrium rate (equilibrium time, 10 min), large adsorption capability (maximum capacity, 284.66 mg g^-1), excellent adsorption selectivity (selectivity coefficient, 11.36), and good reusability (number of cycles, 5 times) via equilibrium adsorption experiments. Subsequently, as a novel solid phase extraction (SPE) adsorbent, the adsorption performance of SMZ onto MIP-IL@UIO-66 was better than that of a commercial SPE adsorbent. A MISPE column combined with high-performance liquid chromatography (HPLC) was presented to detect SMZ in water, soil, egg, and pork samples with recoveries of 91-106%. Hydrogen bonds, electrostatic and π-π interactions, and molecular memory were attributed to recognizing the SMZ of MIP-IL@UIO-66.

Combined Layer-by-Layer/Hydrothermal Synthesis of Fe3O4@MIL-100(Fe) for Ofloxacin Adsorption from Environmental Waters

A simple not solvent and time consuming Fe₃O₄@MIL-100(Fe), synthesized in the presence of a small amount of magnetite (Fe₃O₄) nanoparticles (27.3 wt%), is here presented and discussed. Layer-by-layer alone (20 shell), and combined layer-by-layer (5 shell)/reflux or /hydrothermal synthetic procedures were compared. The last approach (Fe₃O₄@MIL-100_H sample) is suitable (i) to obtain rounded-shaped nanoparticles (200–400 nm diameter) of magnetite core and MIL-100(Fe) shell; (ii) to reduce the solvent and time consumption (the layer-by-layer procedure is applied only 5 times); (iii) to give the highest MIL-100(Fe) amount in the composite (72.7 vs. 18.5 wt% in the layer-by-layer alone); (iv) to obtain a high surface area of 3546 m² g⁻¹. The MIL-100(Fe) sample was also synthesized and both materials were tested for the absorption of Ofloxacin antibiotic (OFL). Langmuir model well describes OFL adsorption on Fe₃O₄@MIL-100_H, indicating an even higher adsorption capacity (218 ± 7 mg g⁻¹) with respect to MIL-100 (123 ± 5 mg g⁻¹). Chemisorption regulates the kinetic process on both the composite materials. Fe₃O₄@MIL-100_H performance was then verified for OFL removal at µg per liter in tap and river waters, and compared with MIL-100. Its relevant and higher adsorption efficiency and the magnetic behavior make it an excellent candidate for environmental depollution.

Removal of organic pollutants from aqueous solution using metal organic frameworks (MOFs)-based adsorbents: A review

The development of metal organic frameworks (MOFs) has recently drawn a lot of scientific interest in water treatment due to the unique properties such as tunable porosities, large pore volumes, hierarchical structures, excellent adsorption and regeneration performances. MOFs represent an eco-friendly alternative to conventional adsorbents especially for the adsorptive removal of noxious organic pollutants from aqueous solution. Advanced MOFs' performances are justified by the introduction of functional groups, magnetic moieties, and specific foreign materials onto MOFs. This however leads to increase in the manufacturing costs of MOFs and consequently possess a huge challenge in large-scale applications. This review hence critically discusses the recent progresses in the development of MOFs-based adsorbents for the removal of selected organic pollutants (e.g., dyes, antibiotics and pesticides) from aqueous solution. Furthermore, major interaction mechanisms between MOFs and organic pollutants in response to numerous experimental conditions, such as pH, temperature, coexisting ions are put forward. Finally, some recommendations in support for designing MOFs with improved adsorption performances are also highlighted.

Degradation of diclofenac by Fe(II)-activated peracetic acid

In this study, peracetic acid (PAA) activated by Fe(II) was proposed to remove diclofenac (DCF) in polluted water. It was found that Fe(II)/PAA system could effectively remove DCF at neutral condition, which has a significant advantage over classical Fenton process. According to the result of scavenging experiment, both hydroxyl radical and peroxy radical were considered to be responsible for the degradation of DCF. The influence of several operational parameters including initial pH, Fe(II) dosage, PAA concentration and common water matrix on DCF removal were investigated. 80% DCF was removed at mild condition (pH 6-7) within 60 s, and its removal rate could be enhanced with the increase in Fe(II) dosage and PAA concentration. Presence of HCO3- and natural organic matter (NOM) was proved to have a significantly negative impact on DCF degradation. Four probable degradation pathways of DCF were proposed based on the detected reaction products, including hydroxylation, C-N bond cleavage, decarboxylation and dehydrogenation.

Adsorptive removal of pharmaceutical pollutants by defective metal organic framework UiO-66: Insight into the contribution of defects

The development of defective structure in MOFs can offer a novel approach to tailor the properties of MOFs-type adsorbent for better adsorption performance. In this study, the contribution of defective structure in UiO-66 to the adsorptive removal of pharmaceutical pollutants from aqueous solution was investigated. The results showed that the controlled defects in UiO-66 greatly affected adsorption equilibrium time, adsorption capacity and adsorption selectivity. Slightly defected UiO-66 contained more open frameworks, and it exhibited faster adsorption equilibrium. However, a high degree of destruction to the amorphous state resulted in a longer equilibrium time, due to the interference in the diffusion process as the result of severe structural collapse and interpenetration. Moreover, a higher degree of structural damage of UiO-66 led to a higher adsorption capacity because of the increased active sites. The maximum adsorption capacity was 321 mg/g for the as-prepared defective UiO-66, which was much higher than that of perfective UiO-66 (54.5 mg/g). Furthermore, defective UiO-66 had a higher adsorption affinity for diclofenac sodium than other studied pharmaceutical pollutants. This study could provide insight into the relationship between defective property and adsorption performance. The results will deepen the understanding of the adsorption mechanism of MOFs-type adsorbents, and help the design of MOFs-type adsorbents with fast adsorption equilibrium, higher adsorption capacity and adsorption selectivity.

Facile and Green Synthesis of Starfruit-Like ZIF-L, and Its Optimization Study

Due to its excellent characteristics, zeolitic imidazole framework-L (ZIF-L) is widely used in various applications, such as drug delivery, wastewater treatments and energy storage. In the synthesis of ZIF-L, the molar ratio of ligand to metal, the reaction time and the temperature are essential parameters to produce excellent ZIF-L. In this work, ZIF-L was synthesized using a facile and green synthesis method. It was statistically investigated and optimized to obtain the best operating conditions. The optimization was carried out toward the amount of adsorbed crystal violet (CV) dye (q) as the response in the statistics. The optimal ZIF-L was obtained using a molar ratio of ligand to metal of 8.2220 for 97 min at 29 °C, where the q value of the CV adsorption onto this optimal ZIF-L reached 823.02 mg/g. The obtained ZIF-L was characterized using SEM, XRD, FTIR and TGA analyses to ensure its excellent characteristics.

Magnetic zeolitic imidazolate frameworks composite as an efficient adsorbent for arsenic removal from aqueous solution

In this study, magnetic zeolitic imidazolate frameworks (ZIF-8) was prepared by a one-step method, where its evolution involved the coprecipitation reactions concomitant with the self-assembly reactions. Structural characterizations indicated that magnetic ZIF-8 showed irregular polyhedral morphology with a large specific surface area (696.5 m²/g) and saturation magnetization (4.31 emu/g). The as-prepared magnetic ZIF-8 enhanced the adsorption performance of As(III) and As(V), compared with bare Fe₃O₄. The pseudo second-order kinetic model (R² = 0.9627 and 0.9893 for As(III) and As(V), respectively) and the Langmuir model (R² = 0.9441 for As(III) and 0.9851 for As(V)) can fit the adsorption process well, confirming the nature of single-layer homogeneous chemisorption. The adsorption capacity was 30.87 and 17.51 mg/g, and their corresponding values of PC were 2.664 and 1.286 L/g, for As(III) and As(V), respectively. Solution pH showed an adverse effect on As(V) adsorption whereas no obvious effect on As(III). The ionic strength and coexisting ions had not obvious influence on adsorption of As(III) and As(V). The adsorption mechanism was explored and discussed based on the detailed spectroscopy analysis. This adsorbent can be recovered magnetically after use, which is promising for the practical application.

Prevalence of antibiotic resistance genes and bacterial pathogens along the soil-mangrove root continuum

Plants roots are colonised by soil bacteria that are known to be the reservoir of antibiotic resistance genes (ARGs). ARGs can transfer between these microorganisms and pathogens, but to what extent these ARGs and pathogens disseminate from soil into plant is poorly understood. Here, we examined a high-resolution resistome profile along the soil-root continuum of mangrove saplings using amplicon and metagenomic sequencing. Data revealed that 91.4% of total ARGs were shared across four root-associated compartments (endosphere, episphere, rhizosphere and unplanted soil). Rather than compartment-selective dynamics of microbiota, the resistome was disseminated in a continuous fashion along the soil-root continuum. Such dissemination was independent of underlying root-associated bacterial and fungal microbiota, but might be facilitated by a multiplicity of mobile genetic elements. As the multiple-drug resistant pathogens, Vibrio vulnificus, pathogenic Escherichia coli and Klebsiella pneumoniae consistently predominated across four compartments, indicating the potential dissemination of antibiotic pathogens along the soil-root continuum. Through deciphering the profile and dynamics of the root-associated resistome and pathogens, our study identified the soil-root continuum as an interconnected sink through which certain ARGs and pathogens can flow from soil into the plant.

Fenton/Fenton-like processes with in-situ production of hydrogen peroxide/hydroxyl radical for degradation of emerging contaminants: Advances and prospects

Fenton processes based on the reaction between Fe²⁺ and H₂O₂ to produce hydroxyl radicals, have been widely studied and applied for the degradation of toxic organic contaminants in wastewater due to its high efficiency, mild condition and simple operation. However, H₂O₂ is usually added by bulk feeding, which suffers from the potential risks during the storage and transportation of H₂O₂ as well as its low utilization efficiency. Therefore, Fenton/Fenton-like processes with in-situ production of H₂O₂ have received increasing attention, in which H₂O₂ was in-situ produced through O₂ activation, then decomposed into hydroxyl radicals by Fenton catalysts. In this review, the in situ production of H₂O₂ for Fenton oxidation was introduced, the strategies for activation of O₂ to generate H₂O₂ were summarized, including chemical reduction, electro-catalysis and photo-catalysis, the influencing factors and the mechanisms of the in situ production and utilization of H₂O₂ in various Fenton/Fenton-like processes were analyzed and discussed, and the applications of these processes for the degradation of toxic organic contaminants were summarized. This review will deepen the understanding of the tacit cooperation between the in situ production and utilization of H₂O₂ in Fenton process, and provide the further insight into this promising process for degradation of emerging contaminants in industrial wastewater.

Assessment of degradation characteristic and mineralization efficiency of norfloxacin by ionizing radiation combined with Fenton-like oxidation

In this study, the degradation of norfloxacin was investigated by ionizing radiation combined with Fenton-like oxidation in order to enhance the degradation and mineralization of norfloxacin. The result showed that the removal efficiency of norfloxacin was 100%, 81.8%, 64.5%, 51.9%, and 45.6% at 0.4 kGy radiation when its concentration was 5, 10, 20, 30, and 40 mg/L. Norfloxacin could be completely degraded over pH range of 3.06-10.96 at 2 kGy radiation. The presence of inorganic anions had obvious influence on the degradation of norfloxacin, which decreased from 89.4% to 59.0%, 76.9%, 86.9%, 88.7% and 83.9% in the presence of 10 mmol/L CO₃^2-, HCO₃^-, NO₃^-, SO₄^2-, Cl^-, HPO₄^2-. The removal efficiency of norfloxacin decreased from 100% to 11.8%, 27.6% and 89.3% in the presence of peptone, glucose, and humic acid. The addition of Fenton-like catalysts, such as magnetite and goethite, could improve the mineralization ratio of norfloxacin because they could decompose hydrogen peroxide generated during the radiation process, to form hydroxyl radicals, leading to the enhancement of removal efficiency of norfloxacin. Finally, the intermediate products of norfloxacin degradation were analyzed by ultra-performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UPLC-QTOF), and the degradation pathway was proposed.

MOF-derived Co3O4-C@FeOOH as an efficient catalyst for catalytic ozonation of norfloxacin

Metal-organic frameworks (MOFs) ZIF-67-derived Co₃O₄-C@FeOOH composite was prepared, characterized and used as an efficinet catalyst for ozonation of norfloxacin (NOF). Results showed that ZIF-67-derived Co₃O₄-C composite maintained the polyhedral structure of ZIF-67. After modification, abundant amorphous FeOOH nanowire attached on the surface of Co₃O₄-C composite, resulting in Co₃O₄-C@FeOOH interwoven polyhedrons. Furthermore, the specific surface area of the formed composite was about 2.5 times that of Co₃O₄-C composite, which might provide more active sites for catalytic reaction. Compared with single ozonation system, the catalytic ozonation process (Co₃O₄-C@FeOOH/O₃) had better performance in NOF mineralization under the same operating conditions. Moreover, in the presence of Co₃O₄-C@FeOOH, faster O₃ decomposition and higher •OH concentration were observed, which could explain the significant enhancement of TOC removal. The co-existence of Fe and Co in various valence states in catalyst might improve the conversion of Co(III)/Co(II) and Fe(III)/Fe(II), which would increase the catalytic activity in catalytic ozonation process. Besides, several main intermediate products were detected and possible NOF degradation pathway was proposed.

Magnetic COFs as catalyst for Fenton-like degradation of sulfamethazine

A novel magnetic covalent organic frameworks (COFs) (Fe₂O₃@COFs) composite was fabricated by restricting the growth of Fe₂O₃ in the nanoscale channel of COFs, which can be used as the Fenton-like catalyst for sulfamethazine (SMT) degradation in aqueous solution. The as-prepared catalyst had good crystallinity, porosity and nano-flower-shaped morphology, and the encapsulated Fe₂O₃ particles were well-distributed and restrained in the nano-channels of COFs. Furthermore, magnetic COFs could not only adsorb SMT, but also catalyze the Fenton-like degradation of SMT in the presence of H₂O₂ (about 100% of removal efficiency). Acidic condition (pH = 3) facilitated SMT degradation in Fe₂O₃@COFs/H₂O₂. system. In consecutive 5 cycles, the catalyst showed a good stability and reusability with a high removal efficiency (>96%), a good mineralization rate (about 35%)，and a very low Fe²⁺ leaching (below 0.1 mg L^-1). Electron spin resonance (ESR) and quenching tests proved that hydroxyl radicals were the main reactive species generated in the Fe₂O₃@COFs/H₂O₂ system for the degradation of SMT. In conclusion, Fe₂O₃@COFs is a promising Fenton-like catalyst for the degradation of SMT and other toxic organic pollutants in water and wastewater.

Boosting free radical type photocatalysis over Pd/Fe-MOFs by coordination structure engineering

The development of novel heterogeneous photocatalytic systems, along with a deep understanding of the relationship between the catalytic center chemical environment and the catalytic performance, is of great significance.

Occurrence and fate of antibiotics, antibiotic resistant genes (ARGs) and antibiotic resistant bacteria (ARB) in municipal wastewater treatment plant: An overview

The occurrence and fate of antibiotics and antibiotic resistant genes (ARGs) and antibiotic resistant bacteria (ARB) in Municipal Wastewater Treatment Plants (WWTPs) worldwide were reviewed. The prevalence of antibiotics in WWTPs among different periods (1999-2009 and 2010-2019) and geographical areas (Europe, America, Asia and Africa) was summarized, analyzed and evaluated. The classes of macrolides (clarithromycin, erythromycin/erythromycin-H₂O, azithromycin, roxithromycin), sulfonamides (sulfamethoxazole), trimethoprim, quinolones (ofloxacin, ciprofloxacin, norfloxacin) and tetracyclines (tetracycline) were the antibiotics most frequently detected, while bla (bla_CTXM, bla_TEM), sul (sul1, sul2), tet (tetO, tetQ, tetW) and ermB genes were the ARGs commonly reported in WWTPs. There was a positive correlation between antibiotics and ARGs commonly detected in WWTPs, except for β-lactam antibiotics and bla genes. The genes bla were found frequently, despite β-lactam antibiotics were seldom detected owing to the hydrolysis. Most of antibiotics had lower levels in the period 2010-2019 in Asian countries than that in period 1999-2009 in North American and European countries. In the effluent of secondary treatment, the concentration of trimethoprim was the highest (138 ng/L in median) and the concentration of other antibiotics remained at lower than 80 ng/L, while the relative abundance of ARGs ranged 2.9-4.6 logs (copies/mL, in median). Future researches on the development of effective antibiotic removal technologies, such as advanced oxidation processes, are suggested to focus on antibiotics frequently detected and their corresponding ARGs in WWTPs.

Adsorption isotherm models: Classification, physical meaning, application and solving method

Adsorption is widely applied separation process, especially in environmental remediation, due to its low cost and high efficiency. Adsorption isotherm models can provide mechanism information of the adsorption process, which is important for the design of adsorption system. However, the classification, physical meaning, application and solving method of the isotherms have not been systematical analyzed and summarized. In this paper, the adsorption isotherms were classified into adsorption empirical isotherms, isotherms based on Polanyi's theory, chemical adsorption isotherms, physical adsorption isotherms, and the ion exchange model. The derivation and physical meaning of the isotherm models were discussed in detail. In addition, the application of the isotherm models were analyzed and summarized based on over 200 adsorption equilibrium data in literature. The statistical parameters for evaluating the fitness of the models were also discussed. Finally, a user interface (UI) was developed based on Excel software for solving the isotherm models, which was provided in supplemental material and can be easily used to model the adsorption equilibrium data. This paper will provide theoretical basis and guiding methodology for the selection and use of the adsorption isotherms.

Insights to perfluorooctanoic acid adsorption micro-mechanism over Fe-based metal organic frameworks: Combining computational calculation with response surface methodology

Adsorption performance, interfacial interaction mechanism and contribution of pores concerning PFOA adsorption to Fe-based metal-organic frameworks (MOFs) including Fe-BTC, MIL-100-Fe and MIL-101-Fe are investigated using experiments and computational calculation at molecular level even electronic level. Fe-BTC (418 mg/g) with more Lewis acid sites demonstrates higher adsorption capacity of PFOA in comparison with MIL-100-Fe (349 mg/g) and MIL-101-Fe (370 mg/g). Adsorption isotherms and kinetics indicate presence of monolayer adsorption and chemisorption in adsorption process. The pH dependence of PFOA adsorption to Fe-based MOFs is statistically revealed by experiments and analysis of variance of response surface methodology (RSM). XPS spectra of MOF-PFOA corroborate that decreasing binding energy of Fe2p and increasing binding energy of F1s, suggesting the presence of Lewis acid/base complexing (LAB) and hydrophobic interaction in adsorption process. Differential charge demonstrates that Fe center and benzene of organic ligands are respectively electron acceptor and donor in adsorption process. Electronic level mechanism finds that LAB complexing dominates adsorption process due to highest overlap of electron cloud. Smaller pores such as triangle and pentagonal pores of Fe-based MOFs contribute to the load of PFOA, while larger hexagonal one enable PFOA to enter into cages, as revealed by computational calculation.

Covalent organic frameworks as efficient adsorbent for sulfamerazine removal from aqueous solution

Here, TPB (triphenylbenzene) - DMTP (dimethoxyterephthaldehyde) -COF was prepared, characterized and used as effective adsorbent for the removal of sulfamerazine (SMT) from aqueous solution. Its adsorption characteristics and mechanism were explored. With large channel (∼3.3 nm), high specific surface area (2115 m²/g), and high crystallite, TPB-DMTP-COF showed high adsorption capacity (209 mg/g), fast adsorption equilibrium (80 min), and good reusability. Natural pH condition was optimal for its adsorption capacity, while electrostatic repulsion between TPB-DMTP-COF and SMT accounted for the low adsorption performance at acidic or alkaline conditions. According to the DFT method, SMT molecules adsorbed in the pore-sites of COFs via C-H···π interaction was the predominant and stable adsorption configuration accounting for the efficient removal of SMT in large quantity. This study revealed the great adsorption potential of COFs skeleton itself in the application of environmental remediation.

Degradation of antibiotics by advanced oxidation processes: An overview

Antibiotics are becoming emerging contaminants due to their extensive production and consumption, which have caused hazards to the ecological environment and human health. Various techniques have been studied to remove antibiotics from water and wastewater, including biological, physical and chemical methods. Among them, advanced oxidation processes (AOPs) have received increasing attention due to their fast reaction rate and strong oxidation capability, which are effective for the degradation of antibiotics in aquatic environments. In this review paper, a variety of AOPs, such as Fenton or Fenton-like reaction, ozonation or catalytic ozonation, photocatalytic oxidation, electrochemical oxidation, and ionizing radiation were briefly introduced, including their principles, characteristics, main influencing factors and applications. The current applications of AOPs for the degradation of antibiotics in water and wastewater were analyzed and summarized, the concluding remarks were given and their future perspectives and challenges were discussed.

Sustainable synthesis of modulated Fe-MOFs with enhanced catalyst performance for persulfate to degrade organic pollutants

In this study, four typical modulators (NH₄OH(A), CH₃COOH(B), CH₃COONa(C) and CH₃COONH₄(D)) were applied to modulate the microwave-assisted synthesis of Fe-MOFs. The effects of various modulators on the yield, electrochemistry activity and PS activation capacity of prepared catalysts were systematically investigated. The ideal modulator was revealed as the 7.5 mM CH₃COONH₄. Contributed by the defects caused by the dual effects of CH₃COONH₄, Fe-MOFs-D-7.5/PS system showed excellent orange G (OG) degradation with high reaction stoichiometric efficiency (RSE) and desirable recycling performance. The main radicals should be SO₄^·- and O₂^·- which were confirmed by EPR and chemical quenchers. Furthermore, the frontier molecular orbital (FMO) theory and dual descriptor (DD) method were employed in predicting radical attacking sites of OG. According to the results of theoretical computations and experimental detection, degradation pathways of OG in Fe-MOFs-D-7.5/PS system were proposed. Similar to the function of the battery, this study gives new insight into the possible mediatory roles of Fe-MOFs-D-7.5 in PS activation by transferring the electrons between PS and the unsaturated metal sites (CUS). The Fe-MOFs-D-7.5/PS system is a promising process for environmental remediation.

Tröger's base functionalized recyclable porous covalent organic polymer (COP) for dye adsorption from water

Tröger's base incorporated recyclable COP for acid dye removal from effluent.

Metal-Organic Frameworks of MIL-100(Fe, Cr) and MIL-101(Cr) for Aromatic Amines Adsorption from Aqueous Solutions

MIL-100(Fe, Cr) and MIL-101(Cr) were synthesized by the hydrothermal method and applied to the adsorptions of five aromatic amines from aqueous solutions. These three metal-organic frameworks (MOFs) were well characterized by powder X-ray diffraction (PXRD), scanning electron microscope (SEM), transmission electron microscope (TEM), thermogravimetric analysis (TGA) and surface area analysis. The adsorption mechanism of three MOFs and the effects of the structures of MOFs on the adsorption of aromatic amines were discussed. The results show that the cavity system and suitable hydrogen bond acceptor were important factors for the adsorption for five aromatic amines of aniline, 1-naphthalamine, o-toluidine, 2-amino-4-nitrotoluene and 2-nitroaniline: (a) the saturated adsorption capacity of aniline, 1-naphthylamine and o-toluidine on MIL-100(Fe) were 52.0, 53.4 and 49.6 mg/g, respectively, which can be attributed to the intermolecular hydrogen bond interaction and cavity system diffusion. (b) The adsorption capacity of 2-nitroaniline and 2-amino-4-nitrotoluene on MIL-101(Cr) were 54.3 and 25.0 mg/g, respectively, which can be attributed to the more suitable pore size of MIL-101(Cr) than that of MIL-100(Fe, Cr). The MOFs of MIL-100(Fe) and MIL-101(Cr) can be potential materials for removing aromatic amines from aqueous solutions.