Aggregation kinetics of different surface-modified polystyrene nanoparticles in monovalent and divalent electrolytes

The size-dependent effects of nanoplastics in mouse primary hepatocytes from cells to molecules

Nanoplastics (NPs) are easily ingested by organisms and their major accumulation organ was determined to be liver. To date, the size-dependent cytotoxicity of NPs on mammalian hepatocytes remains unclear. This study utilized mouse primary hepatocytes and catalase (CAT) as specific receptors to investigate the toxicity of NPs from cells to molecules, focusing on size-dependent effects. Results showed that the larger the particle size of NP at low doses (≤50 mg/L), the most pronounced inhibitory effect on hepatocyte viability. 20 nm NPs significantly inhibit cell viability only at high doses (100 mg/L). Larger NP particles (500 nm and 1000 nm) resulted in a massive release of lactate dehydrogenase (LDH) from the cell (cell membrane damage). Reactive oxygen species (ROS), superoxide dismutase (SOD) and CAT tests suggest that NPs disturbed the cellular antioxidant system. 20 nm NPs show great strength in oxidizing lipids and disrupting mitochondrial function compared to NPs of other particle sizes. The degree of inhibition of CAT activity by different sized NPs was coherent at the cellular and molecular levels, and NP-500 had the most impact. This suggests that the structure and microenvironment of the polypeptide chain in the vicinity of the CAT active site is more susceptible to proximity and alteration by NP-500. In addition, the smaller NPs are capable of inducing relaxation of CAT backbone, disruption of H-bonding and reduction of α-helix content, whereas the larger NPs cause contraction of CAT backbone and increase in α-helix content. All NPs induce CAT fluorescence sensitization and make the chromophore microenvironment hydrophobic. This study provides new insights for NP risk assessment and applications.

Heteroaggregation kinetics of oppositely charged nanoplastics in aquatic environments: Effects of particle ratio, solution chemistry, and interaction sequence

Interactions between positively charged amino-modified (APS) and negatively charged bare (BPS) polystyrene nanoplastics may cause heteroaggregation in aquatic environments. This study investigated the effects of particle concentration ratio, solution chemistry [electrolytes, pH, and natural organic matter (NOM)], and interaction sequence on their heteroaggregation kinetics. In the absence of electrolytes and NOM, the APS/BPS ratio for attaining maximum heteroaggregation rate (khetero) increased from APS/BPS= 3/7 to APS/BPS= 1/1 as pH increased from 4 to 10, indicating that electrostatic interactions dominated heteroaggregation. In the absence of NOM, khetero ranked APS/BPS= 2/3 > APS/BPS= 1/1 > APS/BPS= 3/2. Colloidal stability decreased linearly as pH increased from 4 to 8 at APS/BPS= 1/1, while diffusion-limited heteroaggregation persisted at pH 10. In NaCl solution, humic acid (HA) retarded heteroaggregation more effectively than sodium alginate (SA) via steric hindrance and weakening electrostatic interactions, following the modified Derjaguin-Landau-Verwey-Overbeek (MDLVO) theory. Compared with simultaneous interactions among APS, BPS, NaCl, and NOM, the NOM retardation effects on heteroaggregation weakened if delaying its interaction with others. In CaCl2 solution, the effects of NOM on heteroaggregation depended on counterbalance among charge screening, steric hindrance, and calcium bridging. These findings highlight the important role of heteroaggregation between oppositely charged nanoplastics on their fate and transport in aquatic environments.

Algae polysaccharide-induced transport transformation of nanoplastics in seawater-saturated porous media

This study examined the distinct effects of algae polysaccharides (AP), namely sodium alginate (SA), fucoidan (FU), and laminarin (LA), on the aggregation of nanoplastics (NP) in seawater, as well as their subsequent transport in seawater-saturated sea sand. The pristine 50 nm NP tended to form large aggregates, with an average size of approximately 934.5 ± 11 nm. Recovery of NP from the effluent (Meff) was low, at only 18.2 %, and a ripening effect was observed in the breakthrough curve (BTC). Upon the addition of SA, which contains carboxyl groups, the zeta (ζ)-potential of the NP increased by 2.8 mV. This modest enhancement of electrostatic interaction with NP colloids led to a reduction in the aggregation size of NP to 598.0 ± 27 nm and effectively mitigated the ripening effect observed in the BTC. Furthermore, SA's adherence to the sand surface and the resulting increase in electrostatic repulsion, caused a rise in Meff to 27.5 %. In contrast, the introduction of FU, which contains sulfate ester groups, resulted in a surge in ζ-potential of the NP to -27.7 ± 0.76 mV. The intensified electrostatic repulsion between NP and between NP and sand greatly increased Meff to 45.6 %. Unlike the effects of SA and FU, the addition of LA, a neutral compound, caused a near disappearance of ζ-potential of NP (-3.25 ± 0.68 mV). This change enhanced the steric hindrance effect, resulting in complete stabilization of particles and a blocking effect in the BTC of NP. Quantum chemical simulations supported the significant changes in the electrostatic potential of NP colloids induced by SA, FU and LA. In summary, the presence of AP can induce variability in the mobility of NP in seawater-saturated porous media, depending on the nature of the weak, strong, or non-electrostatic interactions between colloids, which are influenced by the structure and functionalization of the polysaccharides themselves. These findings provide valuable insights into the complex and variable behavior of NP transport in the marine environment.

Nanoplastics in Water: Artificial Intelligence-Assisted 4D Physicochemical Characterization and Rapid In Situ Detection

For the first time, we present a much-needed technology for the in situ and real-time detection of nanoplastics in aquatic systems. We show an artificial intelligence-assisted nanodigital in-line holographic microscopy (AI-assisted nano-DIHM) that automatically classifies nano- and microplastics simultaneously from nonplastic particles within milliseconds in stationary and dynamic natural waters, without sample preparation. AI-assisted nano-DIHM identifies 2 and 1% of waterborne particles as nano/microplastics in Lake Ontario and the Saint Lawrence River, respectively. Nano-DIHM provides physicochemical properties of single particles or clusters of nano/microplastics, including size, shape, optical phase, perimeter, surface area, roughness, and edge gradient. It distinguishes nano/microplastics from mixtures of organics, inorganics, biological particles, and coated heterogeneous clusters. This technology allows 4D tracking and 3D structural and spatial study of waterborne nano/microplastics. Independent transmission electron microscopy, mass spectrometry, and nanoparticle tracking analysis validates nano-DIHM data. Complementary modeling demonstrates nano- and microplastics have significantly distinct distribution patterns in water, which affect their transport and fate, rendering nano-DIHM a powerful tool for accurate nano/microplastic life-cycle analysis and hotspot remediation.

Comparing the effects and mechanisms of exposure to polystyrene nanoplastics with different functional groups on the male reproductive system

After aging in the environment, some nanoplastics will carry different charges and functional groups, thereby altering their toxicological effects. To evaluate the potential impact of aging of nanoplastics on the mammalian reproductive system, we exposed C57BL/6 male mice to a dose of 5 mg/kg/d polystyrene nanoparticles (PS-NPs) with different functional groups (unmodified, carboxyl functionalized and amino functionalized) for 45 days for this study. The results suggest that PS-NPs with different functional groups triggered oxidative stress, a decreased in the testis index, disruption of the outer wall of the seminiferous tubules, reduction in the number of spermatogonia cells and sperm counts, and an increased in sperm malformations. We performed GO and KEGG enrichment analysis on the differentially expressed proteins, and found they were mainly enriched in protein transport, RNA splicing and mTOR signaling. We confirmed that the PI3K-AKT-mTOR pathway is over activated, which may lead to reduction of spermatogonia stem cells by over differentiation. Strikingly, PS-NPs with functional group modifications are more toxic than those of unmodified polystyrene, and that PS-NPs with positively charged amino modifications are the most toxic. This study provides a new understanding for correctly evaluating the toxicological effects of plastic aging, and of the mechanism responsible for the reproductive toxicity caused by nanoplastics.

Mechanisms of increased small nanoplastic particle retention in water-saturated sand media with montmorillonite and diatomite: Particle sizes, water components, and modelling

The processes by which small nanoplastics (NPs) accumulate in soil are unclear. To clarify the different deposition processes that affect small NPs (< 30 nm) compared to larger NPs in the soil environment, due to their interaction with clays as major soil components, the transport behavior of two-sized NPs (20 and 80 nm) with two clays (diatomite (Diat) and montmorillonite (Mont)) in NaCl and CaCl2 solutions were investigated in water-saturated quartz sand columns. The experimental results showed that more 20 nm NPs could enter the lattice structure of Diat than Mont in NaCl solution. This contributed to the stronger deposition of 20 nm NPs by Diat on sand, which was associated with a lower k1d/k1 value (obtained from two-site kinetic attachment model). In contrast, 80 nm NPs had a stronger reversible retention than 20 nm NPs with Mont, even though both sizes of NPs-Mont displayed a similar transportability. In CaCl2 solution, the larger NPs-Mont hetero-aggregates formed with a stronger suppressed depth of φmax based on Derjaguin-Landau-Verwey-Overbeek theory. Thus, Mont had a stronger transport inhibition than Diat for both NPs sizes, with a lower k1d/k1. These findings could benefit in predicting the size-based deposition of NPs in a heterogenous soil environment.

Influence of magnetite and its weathering originated maghemite and hematite minerals on sedimentation and transport of nanoplastics in the aqueous and subsurface environments

Persistent nanoplastics (NPs) and their interaction with ubiquitous iron oxide minerals (IOMs) require a detailed understanding to dictate NPs fate and transport in aqueous and subsurface environments. Current study emphasizes on understanding nanoplastics (NPs) interaction with magnetite, and its weathering-originated mineral colloids, i.e., maghemite and hematite under varying environmental conditions (pH, humic acid, ionic strength and water matrix). Results showed that the higher surface hydroxyl group, smaller particle size, and positive surface charge of magnetite led to maximum NPs sorption (805.8 mg/g) in comparison to maghemite (602 mg/g) and hematite (384.3 mg/g). Charge distribution and sedimentation kinetic studies in bimodal systems showed enhanced coagulation in magnetite-NPs system. FTIR and XPS analysis of NPs-IOMs reaction precipitate revealed the vital role of surface functionality in their interaction. Column experiments revealed higher NPs retention in IOMs-coated quartz sand than bare quartz sand. Further, in river water (RW), magnetite-coated sand has shown maximum NPs retention (>80 %) than maghemite (62 %) and hematite (52 %), suggesting limited NPs mobility in the presence of magnetite in subsurface conditions. These findings elucidated the dependence of NPs fate on IOMs in freshwater systems and illustrated IOMs impact on NPs mobility in the subsurface porous environment.

Sublethal effects induced by different plastic nano-sized particles in Daphnia magna at environmentally relevant concentrations

A growing number of studies have reported the toxic effects of nanoplastics (NPs) on organisms. However, the focus of these studies has almost exclusively been on the use of polystyrene (PS) nanospheres. Herein, we aim to evaluate the sublethal effects on Daphnia magna juveniles of three different NP polymers: PS-NPs with an average size of 200 nm, polyethylene [PE] NPs and polyvinyl chloride [PVC] NPs with a size distribution between 50 and 350 nm and a comparable mean size. For each polymer, five environmentally relevant concentrations were tested (from 2.5 to 250 μg/L) for an exposure time of 48 h. NP effects were assessed at the biochemical level by investigating the amount of reactive oxygen species (ROS) and the activity of the antioxidant enzyme catalase (CAT) and at the behavioral level by evaluating the swimming behavior (distance moved). Our results highlight that exposure to PVC-NPs can have sublethal effects on Daphnia magna at the biochemical and behavioral levels. The potential role of particle size on the measured effects cannot be excluded as PVC and PE showed a wider size range distribution than PS, with particles displaying sizes from 50 to 350 nm. However, we infer that the chemical structure of PVC, which differs from that of PE of the same range size, concurs to explain the observed effects. Consequently, as PS seems not to be the most hazardous polymer, we suggest that the use of data on PS toxicity alone can lead to an underestimation of NP hazards.

Impact of nanoplastics on membrane scaling and fouling in reverse osmosis desalination process

Nanoplastics (NPs) are a prevalent type of emerging pollutant in marine environment. However, their fouling behavior and impact on reverse osmosis (RO) membrane performance remain unexplored. We investigated the relationship between polystyrene (PS), one of the most abundant NPs, with silica scaling and humic acid (HA) fouling in RO. The results demonstrated that the surface potential of NPs played an important role in the combined scaling and fouling process. Compared with the negatively charged NPs (original PS and carboxyl group modified PS, PS-COOH), the amino-functionalized PS (PS-NH2) with positive surface charge significantly accelerated membrane scaling/fouling and induced a synergistic water flux decline, due to the strong electrostatic attraction between PS-NH2, foulants, and the membrane surface. The amino groups acted as binding sites, which promoted the heterogeneous nucleation of silica and adsorption of HA, then formed stable composite pollutants. Thermodynamic analysis via isothermal titration calorimetry (ITC) further confirmed the spontaneous formation of stable complexes between PS-NH2 and silicates/HA. Our study provides new insights into the combined NPs fouling with other scalants or foulants, and offers guidance for the accurate prediction of RO performance in the presence of NPs.

Aggregation behavior of polystyrene nanoplastics: Role of surface functional groups and protein and electrolyte variation

Aggregation kinetics of plastics are affected by the surface functional groups and exposure orders (electrolyte and protein) with kinds of mechanisms in aquatic environment. This study investigates the aggregation of polystyrene nanoplastics (PSNPs) with varying surface functional groups in the presence of common electrolytes (NaCl, CaCl2, Na2SO4) and bovine serum albumin (BSA). It also examines the impact of different exposure orders, namely BSA + NaCl (adding them together), BSA → NaCl (adding BSA firstly and then NaCl), and NaCl → BSA (adding NaCl firstly and then BSA), on PSNPs aggregation. The presence of BSA decreased the critical coagulation concentration in NaCl (CCCNa+) of the non-modified PS-Bare from 222.17 to 142.81 mM (35.72%), but increased that of the carboxyl-modified PS-COOH from 157.34 to 160.03 mM (1.71%). This might be ascribed to the thicker absorbed layer of BSA onto the PS-Bare surface, known from Ohshima's soft particle theory. Their aggregation in CaCl2 was both increased because of Ca2+ bridging. Different from the monotonous effects of BSA on PS-Bare and PS-COOH, BSA initially facilitated PS-NH2 aggregation via patch-charge attraction, then inhibited it at higher salt levels through steric repulsion. Furthermore, exposure orders had no significant effect on PS-Bare and PS-COOH, but had a NaCl concentration-dependent impact on PS-NH2. At the low NaCl concentrations (10 and 100 mM), no obvious influence could be observed. While, at 300 mM NaCl, the high concentrations of BSA could not totally stabilize the salt-induced aggregates in NaCl → BSA, but could achieve it in the other two orders. These might be attributed to the electrical double layer compression by NaCl, "patch-charge" force and steric hindrance by BSA. These experimental findings shed light on the potential fate and transport of nanoparticles in aquatic environments.

Photo-oxidation of Micro- and Nanoplastics: Physical, Chemical, and Biological Effects in Environments

Micro- and nanoplastics (MNPs) are attracting increasing attention due to their persistence and potential ecological risks. This review critically summarizes the effects of photo-oxidation on the physical, chemical, and biological behaviors of MNPs in aquatic and terrestrial environments. The core of this paper explores how photo-oxidation-induced surface property changes in MNPs affect their adsorption toward contaminants, the stability and mobility of MNPs in water and porous media, as well as the transport of pollutants such as organic pollutants (OPs) and heavy metals (HMs). It then reviews the photochemical processes of MNPs with coexisting constituents, highlighting critical factors affecting the photo-oxidation of MNPs, and the contribution of MNPs to the phototransformation of other contaminants. The distinct biological effects and mechanism of aged MNPs are pointed out, in terms of the toxicity to aquatic organisms, biofilm formation, planktonic microbial growth, and soil and sediment microbial community and function. Furthermore, the research gaps and perspectives are put forward, regarding the underlying interaction mechanisms of MNPs with coexisting natural constituents and pollutants under photo-oxidation conditions, the combined effects of photo-oxidation and natural constituents on the fate of MNPs, and the microbiological effect of photoaged MNPs, especially the biotransformation of pollutants.

SERS detection of surface-adsorbent toxic substances of microplastics based on gold nanoparticles and surface acoustic waves

Microplastics adsorb toxic substances and act as a transport medium. When microplastics adsorbed with toxic substances accumulate in the body, the microplastics and the adsorbed toxic substances can cause serious diseases, such as cancer. This work aimed to develop a surface-enhanced Raman spectroscopy (SERS) detection method for surface-adsorbent toxic substances by forming gold nanogaps on microplastics using surface acoustic waves (SAWs). Polystyrene microparticles (PSMPs; 1 μm) and polycyclic aromatic hydrocarbons (PAHs), including pyrene, anthracene, and fluorene, were selected as microplastics and toxic substances, respectively. Gold nanoparticles (AuNPs; 50 nm) were used as a SERS agent. The Raman characteristic peaks of the PAHs adsorbed on the surface of PSMPs were detected, and the SERS intensity and logarithm of the concentrations of pyrene, anthracene, and fluorene showed a linear relationship (R2 = 0.98), and the limits of detection were 95, 168, and 195 nM, respectively. Each PAH was detected on the surface of PSMPs, which were adsorbed with toxic substances in a mixture of three PAHs, indicating that the technique can be used to elucidate mixtures of toxic substances. The proposed SERS detection method based on SAWs could sense toxic substances that were surface-adsorbed on microplastics and can be utilized to monitor or track pollutants in aquatic environments.

Adsorption behavior of triclosan on polystyrene nanoplastics: The roles of particle size, surface functionalization, and environmental factors

Nanoplastics (NPs) contribute substantially to the transport of waterborne pollutants. Triclosan (TCS) has a high potential to contact with NPs because of their prevalence in natural waters. Herein, this study investigated the adsorption behavior of TCS on differently sized and functionalized polystyrene (PS) NPs. The effects of environmental factors such as pH, salinity, and dissolved organic matter (DOM) were also evaluated. Results suggest that the adsorption equilibrium constant (kd) of TCS in pristine PSNP suspensions followed the order as: PSNPs-50 nm (4.39 L·g-1) > PSNPs-100 nm (2.78 L·g-1) > PSNPs-200 nm (2.59 L·g-1) > PSNPs-500 nm (1.36 L·g-1) ≈ PSNPs-900 nm (1.36 L·g-1). For the functionalized PSNPs (i.e., PSNPs-COOH, PSNPs-NH2), the values of specific surface area normalized kd called kd, SSA were higher than those of pristine PSNPs. Meanwhile, TCS adsorption on two functionalized PSNPs remained stable and then decreased as salinity increased, while an opposite trend was observed toward pristine PSNPs. All these suggested that physicochemical properties of PSNPs (e.g., particle size and surface functional groups) are important factors influencing their adsorption capacity. When the solution pH raised, the adsorbed amounts of TCS on all tested PSNPs prone to decline. However, DOM only affected the adsorption behavior of PSNPs-50 nm, probably owing to its aggregation with tiny PSNPs and the induced secondary adsorption.

Interaction of polystyrene nanoplastics with impurity-bearing ferrihydrite and implication on complex particle sedimentation

Nanoplastics (NPs) usually coexist with impurity-bearing ferrihydrite (ImFh), and their interaction is related to their environmental fate. In this study, the aggregation between ImFh (impurities: Al, Mn and Si) and polystyrene nanoplastics (PSNPs), as well as the sedimentation of ImFh-PSNP complex particles in the aqueous phase were investigated systematically with particle concentrations of 100 mg/L ImFh and 10 mg/L PSNPs. Our results revealed that the PSNP suspension was dispersive and stable under various pH values and low ion strength. After coexisting with ImFh, PSNPs aggregated with the positively charged ImFh to form ImFh-PSNP complex particles, which destroyed the stability of PSNPs. The increase in pH and Na+ concentration could inhibit their aggregation, but high Na+ concentration (>20 mM) caused the homoaggregation of PSNPs. The aggregation capacity of PSNPs with ImFh was in the order of Al-bearing Fh > Fh > Mn-bearing Fh > Si-bearing Fh. Zeta potential and Derjaguin-Landau-Verwey-Overbeek (DLVO) calculations indicated that Al-bearing Fh showed higher positive potential than pure Fh, which caused stronger electrostatic interactions with PSNPs. However, Mn and Si in ImFh decreased the positive potential and inhibited the electrostatic interaction with PSNPs, and the effect of Si was greater than that of Mn. The aggregation between ImFh and PSNPs inhibited the sedimentation of their complex particles, and the higher aggregation capacity appeared to have a greater inhibition degree. Due to the "electrostatic patches" effect of PSNPs, the energy barrier of the ImFh-PSNPs particles was higher than that of the ImFh particles. Our findings clarified the influence of impurities on the interaction between ImFh and PSNPs and provided insight regarding their fate in the environment.

Visual mapping of global nanoplastics research progresses and hotspots: a scientometric assessment analysis

Environmental plastic wastes are continuously degraded into microplastics (MPs) and nanoplastics (NPs); the latter are more potentially harmful to organisms and human health as their smaller size and higher surface-to-volume ratio. Previous reviews on NPs mainly concentrate on specific aspects, such as sources, environmental behavior, and toxicological effects, but few focused on NPs-related scientific publications from a global point of view. Therefore, this bibliometric study aims to summarize the research themes and trends on NPs and also propose potential directions for future inquiry. Related papers were downloaded from the Web of Science Core Collection database on NPs published from 2008 to 2021, and then retrieved information was analyzed using CiteSpace 6.1 R2 and VOSviewer (version 1.6.). Research on NPs mainly involved environmental behaviors, toxicological effects, identification and extraction of NPs, whereas aquatic environments, especially marine systems, attracted more attentions from these scientists compare to terrestrial environments. Furthermore, the adsorption behavior of pollutants by NPs and the toxicological effects of organisms exposed to NPs are the present hotspots, while the regulation of humic acid (HA) on NPs behaviors and the environmental behavior of NPs in freshwater, like rivers and lakes, are the frontier areas of research. This study also explored the possible opportunities and challenges that may be faced in NPs research, which provide a valuable summary and outlook for ongoing NPs-related research, which may be of intrigue and noteworthiness for relevant researchers.

Influence of shape on heteroaggregation of model microplastics: a simulation study

Microplastics are a growing threat, especially in aqueous habitats. For assessing the influence on the ecosystem and possible solution strategies, it is necessary to investigate the "fate" of microplastics in the environment. Microplastics are typically surrounded by natural organic matter, which can cause aggregation via favorable interactions. However, the effect of shape and flow conditions on heteroaggregation is not well understood. We perform molecular dynamics simulations of different microplastic particle shapes with smaller spherical organic matter. We find that mostly smooth particles formed compact structures with large number of neighbors with weak connection strength and higher fractal dimension. Microplastics with sharper edges and corners aggregated into more fractal structures with fewer neighbors, but with stronger connections. We investigated the behavior of aggregates under shear flow. The critical shear rate at which the aggregates break up is much larger for spherical and rounded cube microplastics, the compact aggregate structure outweighs their weaker connection strength. The rounded cube aggregate exhibited unexpectedly high resistance against breakup under shear. We attribute this to being fairly compact due to weaker, flexible neighbor connections, which are still strong enough to prevent particles to break off during shear flow. Irrespective of stronger connections between neighbouring microplastics, fractal aggregates of cubes break up at lower shear rates. We find that cube aggregates reduced their radius of gyration significantly, indicating restructuring during shear, while most neighbor connections were kept intact. Sphere aggregates, however, kept their overall size while undergoing local rearrangements, breaking a significant portion of their neighbor interactions.

Cation-π mechanism promotes the adsorption of humic acid on polystyrene nanoplastics to differently affect their aggregation: Evidence from experimental characterization and DFT calculation

Multiple water-chemistry factors determine nanoplastics aggregation and thus change their bioavailability and ecological risks in natural aquatic environments. However, the dominant factors and their interactive mechanisms remain elusive. In this study, polystyrene nanoplastics (PSNPs) showed greater colloidal stability in Li Lake water compared to ultrapure water. The RDA and PARAFAC results suggested that dissolved organic carbon, humic acid (HA) in particular, Ca2+, and pH are critical factors influencing PSNPs aggregation. Batch experiments showed that the critical coagulation concentration (CCC) of PSNPs was increased with pH increase; HA increased the CCC of PSNPs in NaCl by 2.6-fold but decreased that in CaCl2 by 1.8-fold. Moreover, cations increased the adsorption of HA on PSNPs. The DFT results suggested that HA-cations complexes (EAE = -1.10 eV and -0.51 eV for HA-Ca2+ and HA-Na+, respectively) but not HA alone (EAE = -0.33 eV) are the main scenarios for their adsorption on PSNPs, and a cation-π mechanism between PSNPs and HA-cations complexes dominates PSNPs aggregation in this scenario. The findings are significant for better understanding the environmental process and fate of nanoplastics in aquatic environments. ENVIRONMENTAL IMPLICATION: Nanoplastics are kinds of emerging contaminants. Nanoplastic aggregation determines their bioavailability and toxic risks to ecological health. Herein, the hydrodynamic sizes of PSNPs in local Li Lake water was tested and a redundancy analysis was performed to examine the key water-chemistry factors driving PSNPs aggregation. Moreover, the mechanisms in PSNPs aggregation driven by multiple dominant water-chemistry factors including cations, pH, and DOC were firstly unveiled by combining experimental characterization and theoretical computations. This work improves our understanding of the environmental fate of nanoplastics and provides a theoretical basis for the risk assessment and control of nanoplastics in real aquatic environments.

Recent Advances in the Aggregation Behavior of Nanoplastics in Aquatic Systems

This short review aims to critically discuss the recent advances in supramolecular chemistry to achieve the aggregation of nanoplastics in aquatic systems. Polymer modification provides a vital tool for designing novel and ad hoc synthesized surfactants with properties tuned for some specific applications (e.g., stimuli-responsive nanomaterial, conducting polymers), mainly to aggregate other polymers from the environment. Far from the typical use of surfactants, which ease the dispersion of insoluble molecules in water media or aid solubilization of insoluble molecules on local media, in this case, nanoarchitectonics serve researchers to design surfactants with a focus on the capture of nanoplastics from the environment. Additionally, monovalent and divalent salt additions aided NPs in coagulating in the aquatic systems. Finally, the latest research on NPs' removal efficiency on wastewater treatment plant is reviewed to summarize the advances.

Aggregation and stability of selenium nanoparticles: Complex roles of surface coating, electrolytes and natural organic matter

The application of selenium nanoparticles (SeNPs) as nanofertilizers may lead to the release of SeNPs into aquatic systems. However, the environmental behavior of SeNPs is rarely studied. In this study, using alginate-coated SeNPs (Alg-SeNPs) and polyvinyl alcohol-coated SeNPs (PVA-SeNPs) as models, we systematically investigated the aggregation and stability of SeNPs under various water conditions. PVA-SeNPs were highly stable in mono- and polyvalent electrolytes, probably due to the strong steric hindrance of the capping agent. Alg-SeNPs only suffered from a limited increase in size, even at 2500 mmol/L NaCl and 200 mmol/L MgCl₂, while they underwent apparent aggregation in CaCl₂ and LaCl₃ solutions. The binding of Ca²⁺ and La³⁺ with the guluronic acid part in alginate induced the formation of cross-linking aggregates. Natural organic matter enhanced the stability of Alg-SeNPs in monovalent electrolytes, while accelerated the attachment of Alg-SeNPs in polyvalent electrolytes, due to the cation bridge effects. The long-term stability of SeNPs in natural water showed that the aggregation sizes of Alg-SeNPs and PVA-SeNPs increased to several hundreds of nanometers or above 10 µm after 30 days, implying that SeNPs may be suspended in the water column or further settle down, depending on the surrounding water chemistry. The study may contribute to the deep insight into the fate and mobility of SeNPs in the aquatic environment. The varying fate of SeNPs in different natural waters also suggests that the risks of SeNPs to organisms living in diverse depths in the aquatic compartment should be concerned.

The influence of various microplastics on PBDEs contaminated soil remediation by nZVI and sulfide-nZVI: Impedance, electron-accepting/-donating capacity and aging

The microplastics (MPs) existed in the environment widely has resulted in novel thinking about in-situ remediation techniques, such as nano-zero-valent iron (nZVI) and sulfided nZVI (S-nZVI), which were often compromised by various environmental factors. In this study, three common MPs such as polyvinyl chloride (PVC), polystyrene (PS), and polypropylene (PP) in soil were found to inhibit the degradation rate of decabromodiphenyl ether (BDE209) by nZVI and S-nZVI to different degrees due to MPs inhibiting of electron transfer which is the main way to degrade BDE209. The inhibition strength was related to its impedance (Z) and electron-accepting (EAC)/-donating capacity (EDC). Based on the explanation of the inhibition mechanism, the reason for different aging degrees of nZVI and S-nZVI in different MPs was illustrated, especially in PVC systems. Furthermore, the aging of reacted MPs, functionalization and fragmentation in particular, indicated that they were involved in the degradation process. Moreover, this work provided new insights into the field application of nZVI-based materials for removing persistent organic pollutants (POPs).

Nanoparticulate pollutants in the environment: Analytical methods, formation, and transformation

The wide application of nanomaterials and plastic products generates a substantial number of nanoparticulate pollutants in the environment. Nanoparticulate pollutants are quite different from their bulk counterparts because of their unique physicochemical properties, which may pose a threat to environmental organisms and human beings. To accurately predict the environmental risks of nanoparticulate pollutants, great efforts have been devoted to developing reliable methods to define their occurrence and track their fate and transformation in the environment. Herein, we summarized representative studies on the preconcentration, separation, formation, and transformation of nanoparticulate pollutants in environmental samples. Finally, some perspectives on future research directions are proposed.

The environmental fate of nanoplastics: What we know and what we need to know about aggregation

The presence of nanoplastics in the environment has been proven. There is now an urgent need to determine how nanoplastics behave in the environment and to assess the risks they may pose. Here, we examine nanoplastic homo- and heteroaggregation, with a focus on environmentally relevant nanoplastic particle models. We made a systematic analysis of experimental studies, and ranked the environmental relevance of 377 different solution chemistries, and 163 different nanoplastic particle models. Since polymer latex spheres are not environmentally relevant (due to their monodisperse size, spherical shape, and smooth surface), their aggregation behavior in natural conditions is not transferable to nanoplastics. A few recent studies suggest that nanoplastic particle models that more closely mimic incidentally produced nanoplastics follow different homoaggregation pathways than latex sphere particle models. However, heteroaggregation of environmentally relevant nanoplastic particle models has seldom been studied. Despite this knowledge gap, the current evidence suggests that nanoplastics may be more sensitive to heteroaggregation than previously expected. We therefore provide an updated hypothesis about the likely environmental fate of nanoplastics. Our review demonstrates that it is essential to use environmentally relevant nanoplastic particle models, such as those produced with top-down methods, to avoid biased interpretations of the fate and impact of nanoplastics. Finally, it will be necessary to determine how the heteroaggregation kinetics of nanoplastics impact their settling rate to truly understand nanoplastics' fate and effect in the environment.

Swelling-Induced Fragmentation and Polymer Leakage of Nanoplastics in Seawater

Nanoplastics (NPs) have been successively detected in different environmental matrixes and have aroused great concern worldwide. However, the fate of NPs in real environments such as seawater remains unclear, impeding their environmental risk assessment. Herein, multiple techniques were employed to monitor the particle number concentration, size, and morphology evolution of polystyrene NPs in seawater under simulated sunlight over a time course of 29 days. Aggregation was found to be a continuous process that occurred constantly and was markedly promoted by light irradiation. Moreover, the occurrence of NP swelling, fragmentation, and polymer leaching was evidenced by both transmission electron microscopy and scanning electron microscopy techniques. The statistical results of different transformation types suggested that swelling induces fragmentation and polymer leakage and that light irradiation plays a positive but not decisive role in this transformation. The observation of fragmentation and polymer leakage of poly(methyl methacrylate) and poly(vinyl chloride) NPs suggests that these transformation processes are general for NPs of different polymer types. Facilitated by the increase of surface functional groups, the ions in seawater could penetrate into NPs and then stretch the polymer structure, leading to the swelling phenomenon and other transformations.

Toxicity of micro(nano)plastics with different size and surface charge on human nasal epithelial cells and rats via intranasal exposure

Micro (nano)plastics (MNPs) have become emerging environmental contaminants, yet their toxicity and systemic effects via intranasal exposure remain unclear. This study investigated the in vitro toxicity of thirteen polystyrene MNPs with different surface functionalization (carboxylic (C-PS), amino (A-PS), and bare (PS)) and sizes (20-2000 nm) on human nasal epithelial cells (HNEpCs) at 10-1250 μg/mL as well as their in vivo toxicity to rats via intranasal administration at 125 μg/mL. The in vitro study showed that PS20, PS50, A-PS50, PS500, and A-PS500 significantly inhibited cell viability, which was dependent on particle concentration. A-PS induced higher cytotoxicity than C-PS and PS, and most MNPs inhibited cell proliferation after 24-h. Flow cytometry analysis suggested that PS induced cell apoptosis, while A-PS caused cell necrosis. MNPs were phagocytosed by HNEpCs and entered nucleus. The in vivo study showed that MNPs inhibited dietary behaviors of rats. Histological analysis indicated that PS20, PS200, and A-PS50 thinned out nasal mucosa. Immunohistochemical analysis revealed that exposure to PS20, PS200, and A-PS50 enhanced expression of transient receptor potential cation channel subfamily M (melastatin) member 8 (TRPM8). Systemic effects including hepatocyte cytoplasmic vacuolation and renal tubule dilatation were observed. The results suggested that nasal inhalation of MNPs may disturb energy metabolism and damage upper respiratory tract, liver, and kidneys.

Heteroaggregation of PS microplastic with ferrihydrite leads to rapid removal of microplastic particles from the water column

Microplastic (MP) particles are ubiquitous in aquatic environments. Therefore, understanding the processes that affect their removal from the water column, such as sedimentation, is critical for evaluating the risk they pose to aquatic ecosystems. We performed sedimentation experiments in which polystyrene (PS) and PS + ferrihydrite, a short-range ordered ferric (oxy)hydroxide, were analyzed in settling columns after 1 day and 1 week of settling time. The presence of ferrihydrite increased sedimentation rates of PS at all pH values studied (pH 3-11). At pH 6 we found that almost all PS particles were removed from the water column after only one day of exposure time. SEM/EDS imaging confirmed heteroaggregation between the PS particles and ferrihydrite. Zeta potential measurements indicated that at acidic pH values the negatively charged PS surface was coated with positively charged ferrihydrite particles leading to charge reversal. Our results demonstrate for the first time that ferric (oxy)hydroxides drive heteroaggregation and subsequent removal of MP from the water column, especially at typical pH values found in natural lake environments. Given their abundance in aquatic systems ferric (oxy)hydroxides need to be regarded as key scavengers of MP.

Cytotoxicity and Genotoxicity of Polystyrene Micro- and Nanoplastics with Different Size and Surface Modification in A549 Cells

Background

Micro- and nano-sized plastics (MPs and NPs) have become an environmental issue of global concern due to their small size, strong bio-permeability and high specific surface area. However, few studies have assessed the effect of polystyrene MPs and NPs on human lung cells. In this research, we evaluated the cytotoxicity and genotoxicity of polystyrene (PS) MPs and NPs with different sizes (2 μm and 80 nm) and surface modification (carboxy and amino functionalized polystyrene, pristine polystyrene) in A549 cells.

Methods

The zeta potential and hydrodynamic particle size of five types of PS plastic solutions were measured by dynamic light scattering, and their morphology and degree of aggregation were observed by scanning electron microscopy. After incubation of the PS plastics with A549 cells, the uptake and toxicity of the cells were assessed by fluorescence microscopy, laser scanning confocal microscopy, flow cytometry, MTT, micronucleus formation assay, and reactive oxygen species.

Results

The cytotoxicity and genotoxicity of A549 cells caused by nano-level PS is more serious than that of micro-level. Compared with unmodified PS-NPs, more surface-functionalized PS-NPs were found inside the cells, especially the accumulation of PS-NH₂. Cell viability and the induction of micronuclei (MN) are appreciably impacted in a dose-dependent way. Compared with pristine PS-NPs, functionalized PS-NPs showed stronger cell viability inhibitory ability, and induced more MN scores.

Conclusion

This study shows that the intrinsic size properties and surface modification of PS plastics, the interaction between PS plastics and the receiving medium, intracellular accumulation are critical factors for evaluating the toxicological influences of PS plastics on humans.

Implication of microplastic toxicity on functioning of microalgae in aquatic system

Microplastics (MPs) released from both primary and secondary sources affect the functioning of aquatic system. These MPs and components leached, can interact with aquatic organisms of all trophic levels, including the primary producers, such as microalgae. Considering the ecological value of microalgae and the toxicological effects of MPs towards them, this review provides: (1) a detailed understanding of the interactions between MPs and microalgae in the complex natural environment; (2) a discussion about the toxic effects of single type and mixtures of plastic particles on the microalgae cells, and (3) a discussion about the impacts of MPs on various features of microalgae -based bioremediation technology. For this purpose, toxic effects of MPs on various microalgal species were compiled and plastic components of MPs were ranked on the basis of their toxic effects. Based on available data, ranking for various plastic components was found to be: Polystyrene (PS) (rank 1) > Polyvinyl Chloride (PVC) > Polypropylene (PP) > Polyethylene (PE) (rank 4). Furthermore, the review suggested the need to understand joint toxicity of MPs along with co-contaminants on microalgae as the presence of other pollutants along with MPs might affect microalgae differently. In-depth investigations are required to check the impact of MPs on microalgae-based wastewater treatment technology and controlling factors.

Sensitivity of the Transport of Plastic Nanoparticles to Typical Phosphates Associated with Ionic Strength and Solution pH

The influence of phosphates on the transport of plastic particles in porous media is environmentally relevant due to their ubiquitous coexistence in the subsurface environment. This study investigated the transport of plastic nanoparticles (PNPs) via column experiments, paired with Derjaguin–Landau–Verwey–Overbeek calculations and numerical simulations. The trends of PNP transport vary with increasing concentrations of NaH₂PO₄ and Na₂HPO₄ due to the coupled effects of increased electrostatic repulsion, the competition for retention sites, and the compression of the double layer. Higher pH tends to increase PNP transport due to the enhanced deprotonation of surfaces. The release of retained PNPs under reduced IS and increased pH is limited because most of the PNPs were irreversibly captured in deep primary minima. The presence of physicochemical heterogeneities on solid surfaces can reduce PNP transport and increase the sensitivity of the transport to IS. Furthermore, variations in the hydrogen bonding when the two phosphates act as proton donors will result in different influences on PNP transport at the same IS. This study highlights the sensitivity of PNP transport to phosphates associated with the solution chemistries (e.g., IS and pH) and is helpful for better understanding the fate of PNPs and other colloidal contaminants in the subsurface environment.

Nanoplastic-Induced Nanostructural, Nanomechanical, and Antioxidant Response of Marine Diatom Cylindrotheca closterium

The aim of this study was to examine the effect of positively charged (amine-modified) and negatively charged (carboxyl-modified) polystyrene nanoplastics (PS NPs) on the nanostructural, nanomechanical, and antioxidant responses of the marine diatom Cylindrotheca closterium. The results showed that both types of PS NPs, regardless of surface charge, significantly inhibited the growth of C. closterium during short-term exposure (3 and 4 days). However, longer exposure (14 days) to both PS NPs types did not significantly inhibit growth, which might be related to the detoxifying effect of the microalgal extracellular polymers (EPS) and the higher cell abundance per PS NPs concentration. The exposure of C. closterium to both types of PS NPs at concentrations above the corresponding concentrations that resulted in a 50% reduction of growth (EC50) demonstrated phytotoxic effects, mainly due to the excessive production of reactive oxygen species, resulting in increased oxidative damage to lipids and changes to antioxidant enzyme activities. Diatoms exposed to nanoplastics also showed a significant decrease in cell wall rigidity, which could make the cells more vulnerable. Atomic force microscopy images showed that positively charged PS NPs were mainly adsorbed on the cell surface, while both types of PS NPs were incorporated into the EPS that serves to protect the cells. Since microalgal EPS are an important food source for phytoplankton grazers and higher trophic levels, the incorporation of NPs into the EPS and interactions with the cell walls themselves may pose a major threat to marine microalgae and higher trophic levels and, consequently, to the health and stability of the marine ecosystem.

UV/ozone induced physicochemical transformations of polystyrene nanoparticles and their aggregation tendency and kinetics with natural organic matter in aqueous systems

Once discharged into the environment, plastics debris are unavoidably subjected to natural weathering processes. Unfortunately, the impact of weathering on the aggregation tendency and kinetics of nanoplastics in complex environmental matrices is poorly understood. Here, we investigated the influence of weathering as induced by UV and O₃ treatments, on the aggregation of polystyrene nanoparticles (PSNPs) in simulated waters containing representative organic molecules (humic acid, lysozyme, and alginate) and in natural waters. Results showed that UV/O₃ weathering-induced physicochemical transformations of PSNPs, particularly the formation of oxygen-containing functional groups and the increase in hydrophilicity, altered the aggregation state of PSNPs to different extents. The presence of organic molecules destabilized the UV-aged PSNPs with strength of lysozyme > alginate > humic acid, owing to the decrease of sorption of macromolecules on their surface. Differently, the O₃-aged PSNPs displayed strong stability in the absence or presence of organic molecules (except for lysozyme), probably due to steric repulsion arising from the leakage of endogenous organic matters. This work demonstrates that the aggregation behavior of PSNPs is determined by the complex interplays among weathering, natural organic matter, and solution chemistry, and provides significant insights into the fate and transport of PSNPs in realistic scenarios.

Influence of protein configuration on aggregation kinetics of nanoplastics in aquatic environment

Aggregation kinetics of nanoplastics in aquatic environment are influenced by their interactions with proteins having different structures and properties. This study employed time-resolved dynamic light scattering (TR-DLS) to investigate the effects of 5 proteins (bovine hemoglobin (BHb), bovine (BSA) and human serum albumin (HSA), collagen type I (Col I), and bovine casein (CS)) on aggregation kinetics of polystyrene nanoplastics (PSNPs) under natural water conditions, which were simulated using various ionic strength (1-1000 mM NaCl and 0.01-100 mM CaCl₂), pH (3-9), and protein concentration (1-5 mg/L of total organic carbon). The results indicated that the interactions between proteins and PSNPs strongly depended on electrostatic properties, protein structures, and solution chemistries, which induced distinct aggregation behaviors in NaCl and CaCl₂ solutions. Electrostatic repulsion and steric hindrance dominated their interactions in NaCl solution by stabilizing PSNPs with the order of spherical BSA and disordered CS > heart-shaped HSA > fibrillar Col I; whereas positively charged BHb destabilized PSNPs with aggregation rate of 1.71 nm/s at 300 mM NaCl. In contrast, at CaCl₂ concentration below 20 mM, proteins destabilized PSNPs following the sequence of HSA > BHb > Col I > BSA depending on counterbalance among double layer compression, cation bridging, and steric hindrance; whereas CS stabilized PSNPs by precipitating Ca²⁺ that inhibited charge screening effect. Both protein concentration and solution pH affected protein corona formation, surface charge, and protein structure that altered stability of PSNPs. Characterizations using fluorescence spectroscopy, circular dichroism, and two-dimensional correlation analysis spectroscopy showed fluorescence quenching and ellipticity reduction of proteins, indicating strong adsorption affinity between PSNPs and proteins. The study provides insight to how protein configuration and water chemistry affect fate and transport of nanoplastics in aquatic environment.

Evaluating the Occurrence of Polystyrene Nanoparticles in Environmental Waters by Agglomeration with Alkylated Ferroferric Oxide Followed by Micropore Membrane Filtration Collection and Py-GC/MS Analysis

Although nanoplastics (NPs) are recognized as emerging anthropogenic particulate pollutants, the occurrence of NPs in the environment is rarely reported, partly due to the lack of sensitive methods for the concentration and detection of NPs. Herein, we present an efficient method for enriching NPs of different compositions and various sizes. Alkylated ferroferric oxide (Fe₃O₄) particles were prepared as adsorbents for highly efficient capture of NPs in environmental waters, and the formed large Fe₃O₄-NP agglomerates were separated by membrane filtration. Detection limits of 0.02-0.03 μg/L were obtained for polystyrene (PS) and poly(methyl methacrylate) (PMMA) NPs by detection with pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS). When analyzing real water samples from different sources, it is remarkable that PS NPs were detected in 11 out of 15 samples with concentrations ranging from <0.07 to 0.73 μg/L, while PMMA were not detected. The wide detection of PS NPs in our study confirms the previous speculation that NPs may be ubiquitous in the environmental waters. The accurate quantification of PS NPs in environmental waters make it possible to monitor the pollution status of NPs in aquatic systems and evaluate their potential risks.

Nanoplastics interaction with feldspar and weathering originated secondary minerals (kaolinite and gibbsite) in the riverine environment

Despite the massive accumulation of nanoplastics (NPs) in the freshwater system, research so far has highly focused on the marine environment. NPs interaction with mineral surfaces can influence their fate in freshwater, which will further impact their bioavailability and transport to the oceans. Current work focuses on understanding NPs interaction with weathering sequence of minerals in freshwater under varying geochemical conditions. Primary mineral feldspar and weathering originated secondary minerals, i.e., kaolinite and gibbsite, were investigated for interaction with NPs under batch mode under relevant environmental conditions. Minerals-NPs interaction was also investigated in natural water samples. Results showed that the amorphous nature, small particle size, and positive surface charge of gibbsite resulted in multi-fold sorption of NPs (108.1 mg/g) compared to feldspar (7.7 mg/g) and kaolinite (11.9 mg/g). FTIR spectroscopy revealed hydrogen bonding and complexation as major players in gibbsite-NPs interaction suggesting the possibility of their co-precipitation. The continuous adsorption-desorption and limited sorption capacity of feldspar and kaolinite can be attributed to their negative surface charge, larger size, crystalline nature, and physical sorption. Therefore, both minerals may co-transport and enhance the mobility of NPs.

Effects of temperature and particle concentration on aggregation of nanoplastics in freshwater and seawater

Microplastics have become a significant environmental problem worldwide. Compared with microplastics, nanoplastics are apparently more abundant and harmful but their environmental processes are less well understood. The fate and ecological impacts of nanoplastics in aquatic environments are largely determined by their aggregation properties, which were investigated here using pure water and artificial seawater prepared in the laboratory, as well as river water and coastal seawater collected from subtropical Hong Kong. The tests were carried out at an environmentally realistic temperature range (15-35 °C) with particle concentrations over four orders of magnitude (0.1-100 mg L^-1). Under these experimental conditions, parameters of dynamic light scattering were used to determine the extent of aggregation and colloidal stability of polystyrene nanospheres (nPS), a common test model of nanoplastics. Our results showed that aggregation of nPS was minimal in pure water and river water, but became strong under the ionic strength of artificial seawater and coastal seawater, in which 70 nm nPS could aggregate to > 2000 nm, and this aggregation clearly increased with increase in temperature and particle concentration. The aggregates with increasing size and decreasing colloidal stability were deposited more quickly. Findings from this study imply an increased risk of nanoplastics to marine benthic organisms through the aggregation and deposition processes, particularly in warmer waters.

Nanoplastic State and Fate in Aquatic Environments: Multiscale Modeling

We now know that nanoplastics can harm aquatic organisms, but understanding ecological risk starts with understanding fate. We coupled population balance and fugacity models to predict the conditions under which nanoplastics remain as single particles, aggregate, or sediment and to predict their capacity to concentrate organic pollutants. We carried out simulations across a broad range of nanoplastic concentrations, particle sizes, and particle-particle interactions under a range of salinity and organic matter conditions. The model predicts that across plastic materials and environmental conditions, nanoplastics will either remain mostly dispersed or settle as aggregates with natural colloids. Nanoplastics of different size classes respond dissimilarly to concentration, ionic strength, and organic matter content, indicating that the sizes of nanoplastics to which organisms are exposed likely shift across ecological zones. We implemented a fugacity model of the Great Lakes to assess the organic pollution payload carried by nanoplastics, generating the expectation that nanoplastics would carry nine times more pollutants than microsized plastics and a threshold concentration of 10 μg/L at which they impact pollutant distribution. Our simulations across a broad range of factors inform future experimentation by highlighting the relative importance of size, concentration, material properties, and interactions in driving nanoplastic fate in aquatic environments.

Fate and removal efficiency of polystyrene nanoplastics in a pilot drinking water treatment plant

Occurrence of microplastics and nanoplastics in aquatic systems, as well as in water compartments used to produce drinking water have become a major concern due to their impact on the environment and public health. Nanoplastics in particular, in regard to their fate and removal efficiency in drinking water treatment plants (DWTP), which ensure water quality and supply drinking water for human consumption have been, by far, rarely investigated. This study investigates the removal efficiency of polystyrene (PS) nanoplastics in a conventional water treatment plant providing drinking water for 500'000 consumers. For that purpose, a pilot-scale DWTP, located within the main treatment plant station, reproducing at a reduced scale the different processes and conditions of the main treatment plant is used. The results show that filtration process through sand and granular activated carbon (GAC) filters in the absence of coagulation achieves an overall nanoplastic removal of 88.1%. The removal efficiency of filtration processes is mainly attributed to physical retention and adsorption mechanisms. On the other hand, it is found that coagulation process greatly improves the removal efficiency of nanoplastics with a global removal efficiency equal to 99.4%. The effective removal efficiency of sand filtration increases considerably from 54.3% to 99.2% in the presence of coagulant, indicating that most of PS nanoplastics are removed during sand filtration process. The higher removal efficiency with the addition of coagulant is related to nanoplastics surface charge reduction and aggregation thus significantly increasing their retention in the filter media.

Dispersion and transport of microplastics in three water-saturated coastal soils

The coastal area is one of the key zones for transport and fate of microplastics (MPs). This study investigated the transport behaviors of different sized MPs in three water-saturated coastal soils, with the aim to explore effects of properties of three different coastal soils on the dispersion and migration of three-sized MPs (0.3, 0.5, and 1 µm). All three-sized MPs had the strongest dispersion in Soil 3 solution, followed by that in Soil 1 solution and then that in Soil 2 solution. The strongest dispersion of MPs in Soil 3 solution was attributed to the lowest ionic strength. Such a high dispersion favored MPs movement in soil solution but readily be sorbed and fixed by rich Fe and Al oxides in Soil 3 solid through strong electrostatic attraction, leading to the lowest transport rate (20.5-41.2%). The high ionic strength in the Soil 1 solution decreased the dispersion of MPs, but the presence of high content of humic acid enhanced the electrostatic repulsion and steric hindrance between MPs and soil particles, resulting in the highest transport ability of MPs in Soil 1 (39.4-72.5%). The large amount of dissolved Ca²⁺ and Mg²⁺ in Soil 2 solution favored MPs bridged with fulvic acid, resulting in the highest aggregation of MPs and relatively lower transport ability (34.1-49.6%). Large-sized MPs had higher electrostatic repulsion between the particles, thus increasing the dispersion and transport capacity of MPs in soil. Modeling showed the experiment-consistent results that Soil 3 had the lowest MPs transport after 600 mm of heavy rainfall, with the maximum migration distance of 7.50-10.5 cm, which was smaller than that in Soil 2 (8.10-12.0 cm) and that in Soil 1 (9.00-18.3 cm). These results indicated that MPs transport in coastal soil is significant and soil solution and solid composition plays an important role in the dispersion and transport of MPs, respectively. These findings afforded a great basis for the assessment of the fate and risk of MPs in coastal areas.

Individual and Binary Mixture Toxicity of Five Nanoparticles in Marine Microalga Heterosigma akashiwo

The investigation of the combined toxic action of different types of nanoparticles (NPs) and their interaction between each other and with aquatic organisms is an important problem of modern ecotoxicology. In this study, we assessed the individual and mixture toxicities of cadmium and zinc sulfides (CdS and ZnS), titanium dioxide (TiO₂), and two types of mesoporous silicon dioxide (with no inclusions (SMB3) and with metal inclusions (SMB24)) by a microalga growth inhibition bioassay. The counting and size measurement of microalga cells and NPs were performed by flow cytometry. The biochemical endpoints were measured by a UV-VIS microplate spectrophotometer. The highest toxicity was observed for SMB24 (EC50, 3.6 mg/L) and CdS (EC50, 21.3 mg/L). A combined toxicity bioassay demonstrated that TiO₂ and the SMB3 NPs had a synergistic toxic effect in combinations with all the tested samples except SMB24, probably caused by a “Trojan horse effect”. Sample SMB24 had antagonistic toxic action with CdS and ZnS, which was probably caused by metal ion scavenging.

Understanding the fate of nano-plastics in wastewater treatment plants and their removal using membrane processes

Nanoplastics (NPs) have become a major environmental issue due to their adverse effect on the water environment. Wastewater treatment plant (WWTP) is considered as one of the main sources for breaking down of larger-sized plastic debris and microplastics (MPs) into NPs. This study aims to provide a comprehensive understanding of NPs generation in the WWTPs, their physiochemical characteristics and interaction with the WWTPs. It is found that cracking is the major mechanism of plastics fragmentation in the WWTPs. This review also discusses the current membrane process used for NPs removal. It is found that conventional membrane processes are ineffective as they are not designed for NPs removal and fouling is a major obstacle for its application. Therefore, this study concludes by providing an outlook of developing a bio-nanofiltration process that can be used as a tertiary treatment for removing NPs and other components present in water. Such a process can produce NPs-free water for non-potable use or safe discharge into open waterways.

Nanoplastics adsorption and removal efficiency by granular activated carbon used in drinking water treatment process

In this study Granular Activated Carbon (GAC) used in drinking water treatment processes is evaluated for its capacity to adsorb and remove polystyrene (PS) nanoplastics. Batch experiments are conducted in ultrapure and surface water from Lake Geneva, currently used as drinking water resources. Equilibrium and kinetic studies are conducted to understand adsorption mechanisms and limiting factors. Our results show that in ultrapure water the adsorption and removal of PS nanoplastics are mainly due to electrostatic interactions between the positively charged nanoplastics and negatively charged GAC. It is found that the adsorption capacity increases with nanoplastic concentration with a maximum adsorption capacity of 2.20 mg/g. The adsorption kinetics follows a pseudo-second-order model and indicates that the intra-particle diffusion is not the only rate-controlling step. The Langmuir isotherm indicates that nanoplastics are adsorbed as a homogeneous monolayer onto the GAC surface with a maximum monolayer adsorption capacity of 2.15 mg/g in agreement with the experimental value. In Lake Geneva water the adsorption capacity and removal efficiency of PS nanoplastics are found three times higher than in ultrapure water and increase significantly with increasing PS nanoplastics concentration with a maximum adsorption capacity of 6.33 mg/g. This improvement in adsorption capacity is due to the presence of Dissolved Organic Matter (DOM), resulting in PS surface charge modification, presence of divalent ions making possible the adsorption of PS-DOM complexes, and, aggregation of PS nanoplastics. The kinetic pseudo-second-order and intra-particle diffusion provide a good correlation with the experimental data. In contrast, neither Langmuir nor Freundlich isotherms describe in a satisfactory way the adsorption of nanoplastics by GAC. This study reveals that GAC produced from renewable sources can be considered as a moderate adsorbent for the removal of PS nanoplastics in water treatment plants and that the presence of DOM and cationic species play a major role.

Biochar-facilitated remediation of nanoplastic contaminated water: Effect of pyrolysis temperature induced surface modifications

"Nanoplastics- the emerging contaminants" and "agricultural waste to resource conversion" both are currently at the scientific frontiers and require solutions. This study aims to utilize sugarcane bagasse-derived biochar for the removal of nanoplastics (NPs) from aqueous environment. Three types of biochar were synthesized at three different pyrolysis temperatures, i.e. 350, 550, and 750 ℃ and evaluated for their potential in removing NPs. Effect of various environmental parameters, i.e., competing ions, pH, humic acid and complex aqueous matrices on NPs sorption was also studied. Results showed that attributing to decreased carbonyl functional groups, increased surface area and pore abundance, biochar prepared at 750 ℃ showed drastically higher NPs removal (>99%), while BC-550 and BC-350 showed comparatively lower NPs sorption (<39% and <24%, respectively). Further sorption studies confirmed instantaneous NPs removal with equilibrium attainment within 5 min of interaction and efficient NPs sorption capacity, i.e. 44.9 mg/g for biochar prepared at 750 ℃. Non-linear-kinetic modeling suggested pseudo 1st order removal kinetics while isotherm and thermodynamic modeling confirmed- monolayer instantaneous sorption of NPs sorption. Enhanced electrostatic repulsion resulted in decrease in NPs sorption at alkaline conditions, whereas steric hindrance caused limited removal (<25%) at higher humic acid concentrations.

Heteroaggregation of different surface-modified polystyrene nanoparticles with model natural colloids

This study investigated heteroaggregation of three surface-functionalized polystyrene nanoparticles (PSNPs), i.e. negatively charged unfunctionalized nanoparticles (Bare-PS) and carboxylated nanoparticles (COOH-PS), and positively charged amino-functionalized nanoparticles (NH₂-PS), with two model natural colloids, positively charged hematite and negatively charged kaolin, respectively. Heteroaggregation was conducted at a constant natural colloid concentration and variable NP/colloid concentration ratios. Electrostatic interaction was the main mechanism driving the formation of heteroaggregates. In binary systems containing hematite and Bare-PS/COOH-PS, a charge neutralization - charge inverse mechanism was observed with the increase of PSNP concentration. At NP/hemetite concentration ratios much smaller or larger than the full charge neutralization point, the primary heteroaggregates were stable, while full charge neutralization induced the formation of large secondary heteroaggregates. Large aggregates were not observed in suspensions containing kaolin and NH₂-PS, as highly positively charged NH₂-PS reversed surface charges of kaolin at extremely low concentrations. Heteroaggregation between PSNPs and natural colloids with the same charge is unfavorable due to strong electrostatic repulsion. In the presence of electrolytes, homoaggregation and heteroaggregation both occurred, and homoaggregation of hematite played a key role when the concentration of PSNPs was low. The presence of Suwannee River natural organic matter (SRNOM) could modify surface charges of nanoparticles, and thus affect heteroaggregation behaviors of the binary suspension. When SRNOM and electrolytes were both present, whether SRNOM inducing or hindering the stability of the binary system was a combined effect of NP/colloid concentration ratios, SRNOM concentrations, electrolyte types and ionic strength. Mechanisms extensively reported in homoaggregation such as steric hindrance and cation bridging effects between SRNOM and Ca²⁺ also stand for heteroaggregation. These results highlight the critical role of surface modification on the environmental behaviors of NPs, and will underpin our understanding of the fate and transport of NPs in the aquatic environment.

Metal oxide nanoparticles and polycyclic aromatic hydrocarbons alter nanoplastic's stability and toxicity to zebrafish

Co-occurrence of nanoplastics (NPs) with metal oxide nanoparticles (nMOx) and polycyclic aromatic hydrocarbons (PAHs) have been widely reported. However, there is a scarcity of information on their interactions and combined toxic effects. In this study, we used two different sized NPs [55 nm (NP1) and 100 nm (NP2)] to understand the effect of nMOx (nCuO and nZnO) and PAHs [chrysene (Chr) and fluoranthene (Flu)] on NPs' stability and toxicity to zebrafish. Results revealed that increasing the concentration of nMOx, zeta-potential increased, and charge reversal was observed in NPs suspension while PAH produced no major changes. Aggregation kinetics performed with nMOx exhibited higher aggregation of NPs in presence of NaCl that alleviated critical coagulation concentration. NP1 stabilized the size of otherwise unstable nMOx suspension in the tap-water for a longer period, whereas, aggregation was observed with NP2. The in vivo comet assay results showed that NP1 was more genotoxic than NP2 owing to their lower size. Interestingly the DNA damage was highest in NPs+nMOx followed by nMOx and NPs. Unlike nMOx, Chr/Flu+NPs showed reduced DNA damage as compared to NPs or PAH alone. Alteration in catalase activity and lipid peroxidation value indicated oxidative stress in all exposure groups.

Research progress of nanoplastics in freshwater

With the mass production and use of plastic products, which leads to their continuous entry into the water environment, the problem of environmental pollution has been paid more and more attention by scholars from different countries. In recent years, a large number of studies have focused on microplastics, but few on nanoplastics (NPs). However, NPs are smaller in size, have a higher affinity for cells, and surface and volume ratios are higher than those of microplastics. NPs may also enter biological tissues, blood and cells, which may cause greater potential harm to organisms. In this paper, firstly, the environmental fate of NPs accumulation and deposition is summarized, and further research is needed in the future; secondly, the current techniques for NPs extraction and characterization of NPs extraction and characterization are summarized. At present, the analytical methods of NPs are in the primary stage, and lack of standardized and accurate methods; finally, the toxic effects of NPs on biological morphology, behavior and reproduction are discussed. It has been found that the small size and high surface area of NPs make them more toxic to organisms than microplastics. However, most of the current toxicological studies of NPs on freshwater organisms could not be simulated in real environment.

The crucial role of a protein corona in determining the aggregation kinetics and colloidal stability of polystyrene nanoplastics

Nanosized plastics are considered as being a class of contaminants of emerging concern. The interaction between nanoplastics and proteins may significantly influence the environmental behavior and fate of nanoplastics. Here, we employed time-resolved dynamic light scattering to explore the aggregation kinetics and stability of polystyrene nanoparticles (PSNPs) exposed to a model globular protein (bovine serum albumin, BSA) in the presence of a number of typical electrolytes (NaCl, CaCl₂, and Na₂SO₄). With the increase of the BSA concentration, the amount of BSA adsorbed on the surface of negatively charged PS-Bare (non-modified) and PS-COOH (carboxyl-modified) increased, resulting in higher dispersibility in comparison to the treatment without BSA. This stabilization effect derived from the protein corona structure was revealed by combining characterization techniques and visualized by transmission electron microscopy. Upon addition of NaCl and CaCl₂, the aggregation of positively charged PS-NH₂ (amino-modified) was inhibited by the BSA addition possibly due to the screening of the attractive patch-charge force and the competition for adsorption of cations between PS-NH₂ and the protein. When Na₂SO₄ was present in the suspension, BSA addition significantly increased PS-NH₂ aggregation rate due to patch-charge attraction and the high performance of SO₄^2- in attaching to particles and charge neutralization. These findings shed light on the interactions between PSNPs and proteins, which were shown to vary with the composition of the surface coatings of PSNPs. The newly gained knowledge will help us to forecast the transport and fate of PSNPs in natural aqueous systems.

Exposure of nanoplastics to freeze-thaw leads to aggregation and reduced transport in model groundwater environments

Despite plastic pollution being a significant environmental concern, the impact of environmental conditions such as temperature cycling on the fate of nanoplastics in cold climates remains unknown. To better understand nanoplastic mobility in subsurface environments following freezing and thawing cycles, the transport of 28 nm polystyrene nanoplastics exposed to either constant (10°C) temperature or freeze-thaw (FT) cycles (-10°C to 10°C) was investigated in saturated quartz sand. The stability and transport of nanoplastic suspensions were examined both in the presence and absence of natural organic matter (NOM) over a range of ionic strengths (3-100 mM NaCl). Exposure to 10 FT cycles consistently led to significant aggregation and reduced mobility compared to nanoplastics held at 10°C, especially at low ionic strengths in the absence of NOM. While NOM increased nanoplastic mobility, it did not prevent the aggregation of nanoplastics exposed to FT. We compare our findings with existing literature and show that nanoplastics will largely aggregate and associate with soils rather than undergo long range transport in groundwater in colder climates following freezing temperatures. In fact, FT exposure leads to the formation of stable aggregates that are not prone to disaggregation. As one of the first studies to examine the coupled effect of cold temperature and NOM, this work highlights the need to account for climate and temperature changes when assessing the risks associated with nanoplastic release in aquatic systems.

A review of microplastics aggregation in aquatic environment: Influence factors, analytical methods, and environmental implications

A large amount of plastic waste released into natural waters and their demonstrated toxicity have made the transformation of microplastics (MPs; < 5 mm) and nanoplastics (NPs; < 100 nm) an emerging environmental concern. Aggregation is one of the most important environmental behaviors of MPs, especially in aquatic environments, which determines the mobility, distribution and bioavailability of MPs. In this paper, the sources and inputs of MPs in aquatic environments were first summarized followed by the analytical methods for investigating MP aggregation, including the sampling, visualization, and quantification procedures of MP' particle sizes. We critically evaluated the sampling methods that still remains a methodological gap. Identification and quantification of MPs were mostly carried out by visual, spectroscopic and spectrometric techniques, and modeling analysis. Important factors affecting MP aggregation in natural waters and environmental implications of the aggregation process were also reviewed. Finally, recommendations for future research were discussed, including (1) conducting more field studies; (2) using MPs in laboratory works representing those in the environment; and (3) standardizing methods of identification and quantification. The review gives a comprehensive overview of current knowledge for MP aggregation in natural waters, identifies knowledge gaps, and provides suggestions for future research.