Experimental and modeling study of proton and copper binding properties onto fulvic acid fractions using spectroscopic techniques combined with two-dimensional correlation analysis

The molecular binding sequence transformation of soil organic matter and biochar dissolved black carbon antagonizes the transport of 2,4,6-trichlorophenol

Dissolved organic matter (DOM) and dissolved black carbon (DBC) are significant environmental factors that influence the transport of organic pollutants. However, the mechanisms by which their molecular diversity affects pollutant transport remain unclear. This study elucidates the molecular binding sequence and adsorption sites through which DOM/DBC compounds antagonize the transport of 2,4,6-trichlorophenol (TCP) using column experiments and modelling. DBC exhibits a high TCP adsorption rate (kn = 5.32 × 10-22 mol1-n∙Ln-1∙min-1) and conditional stability constant (logK = 5.19-5.74), indicating a strong binding affinity and antagonistic effect on TCP. This is attributed to the high relative content of lipid/protein compounds in DBC (25.65 % and 30.28 %, respectively). Moreover, the small molecule lipid compounds showed stronger TCP adsorption energy (Ead = -0.0071 eV/-0.0093 eV) in DOM/DBC, combined with two-dimensional correlation spectroscopy model found that DOM/DBC antagonized TCP transport in the environment through binding sequences that transformed from lipid/protein small molecule compounds to lignin/tannin compounds. This study used a multifaceted approach to comprehensively assess the impact of DOM/DBC on TCP transport. It reveals that the molecular diversity of DOM/DBC is a critical factor affecting pollutant transport, providing important insights into the environmental trend and ecological effects of pollutants.

Leaching behaviors of dissolved organic matter from face masks revealed by fluorescence EEM combined with FRI and PARAFAC

Despite numerous studies investigating the occurrence and fate of microplastics, no effort has been devoted toward exploring the characteristics of dissolved organic matter (DOM) leached from face masks mainly made of plastics and additives used in large quantities during the COVID-19 pandemic. By using FTIR, UV-vis, fluorescence EEM coupling with FRI and PARAFAC, and kinetic models of leaching experiments, we explored the leaching behaviors of face mask-derived DOM (FM-DOM) from commonly used face masks including N95, KN95, medical surgical masks, etc. The concentration of FM-DOM increased quickly at early 0-48 h and reached equilibrium at about 48 h measured in terms of dissolved organic carbon and fluorescence intensity. The protein-like materials ranged from 80.32 % to 89.40 % of percentage fluorescence response (Pi,n) were dominant in four types of FM-DOM analyzed by fluorescence EEM-FRI during the leaching experiments from 1 to 360 h. Four fluorescent components were identified, which included tryptophan-like components, tyrosine-like components, microbial protein-like components, and fulvic-like components with fluorescence EEM-PARAFAC models. The multi-order kinetic model (Radj2 0.975-0.999) fitted better than the zero-order and first-order kinetic model (Radj2 0.936-0.982) for all PARAFAC components of FM-DOM based on equations derived by pseudo kinetic models. The leaching rate constants (kn) ranged from 0.058 to 30.938 and the half-life times (T1/2) ranged from 2.73 to 24.87 h for four FM-DOM samples, following the solubility order of fulvic-like components (C4) > microbial protein-like components (C3) > tryptophan-like components (C1) > tyrosine-like components (C2) for FM-DOM from four types of face masks during the leaching experiment from 0 to 360 h. These novel findings will contribute to the understanding of the underappreciated environment impact of face masks in aquatic ecosystems.

Degradation properties of fulvic acid and its microbially driven mechanism from a partial nitritation bioreactor through multi-spectral and bioinformatic analysis

This study employed multispectral techniques to evaluate fulvic acid (FA) compositional characteristic and elucidate its biodegradation mechanisms during partial nitritation (PN) process. Results showed that FA removal efficiency (FRE) decreased from 90.22 to 23.11% when FA concentrations in the reactor were increased from 0 to 162.30 mg/L, and that molecular size, degree of aromatization and humification of the effluent FA macromolecules all increased after treatment. Microbial population analysis indicated that the proliferation of the Comamonas, OLB12 and Thauera exhibit high FA utilization capacity in lower concentrations (<50.59 mg/L), promoting the degradation and removal of macromolecular FA. In addition, the sustained increase in external FA may decrease the abundance of above functional microorganisms, resulting in a rapid drop in FRE. Furthermore, from the genetic perspective, the elevated FA levels restricted carbohydrate (ko00620, ko00010 and ko00020) and nitrogen (HAO, AMO, NIR and NOR) metabolism-related pathways, thereby impeding FA removal and total nitrogen loss associated with N2O emissions.

Characterization of copper binding to different molecular weight fractions of dissolved organic matter in surface water

Dissolved organic matter (DOM) is a kind of substance with complex compositions and wide molecular weight distribution, which can strongly combine with various pollutants. Therefore, the binding characteristics of DOM and heavy metal pollutants can be studied specifically according to the binding characteristics of DOM and pollutants. In this study, DOM in surface water bodies was divided into three levels (MW < 1 kDa, 1 kDa < MW < 5 kDa, MW > 5 kDa) according to different molecular weights (MW). The binding properties were investigated by fluorescence spectrum analysis and complex model. Four components (C1-C4) were identified by PARAFAC. Among them, the contribution rate of protein-like components C1, C2 and C4 to the total fluorescence intensity reached more than 78%, and the log Ka values of low molecular weight components were the highest, which were 3.28, 3.14 and 3.47, respectively, indicating higher binding ability with Cu2+.With the decrease of molecular weight, the log Kb value increases, indicating that the complexation is more stable. The humic component C3 in high molecular weight has stronger binding stability with Cu2+, but the number of binding sites for C3 is 0.36, while that for C2 is 1.51, indicating that its binding sites and binding ability are relatively low. The results showed that the DOM ligand of Cu2+ in surface water showed a certain molecular weight dependence. In addition, different MW DOM lead to different pollution forms. Different properties of DOM ligand combined with Cu2+ were studied in order to control the migration, transformation, bioavailability, morphology and stability of heavy metal pollutants, and to provide theoretical support for the practical application management of surface water pollution control.

Effect of microplastics on the binding properties of Pb(ii) onto dissolved organic matter: insights from fluorescence spectra and FTIR combined with two-dimensional correlation spectroscopy

Heavy metal cations are a typical type of inorganic pollutant that has persistent distribution characteristics in aquatic environments and are easily adsorbed on carriers, posing serious threats to ecological safety and human health. Some studies have shown that the coexistence of dissolved organic matter (DOM) and microplastics (MPs) promotes the adsorption of heavy metal cations, but the mechanism of promoting the adsorption process has not been thoroughly studied. In this study, the effect of polystyrene microplastics (PSMPs) on the binding properties of Pb2+ onto humic acid (HA) in aquatic environments was investigated by spectral analysis and two-dimensional correlation (2D-COS) analysis. When PSMPs co-existed with HA, the adsorption capacity of Pb2+ increased. On the one hand, Pb2+ is directly adsorbed on HA through the mechanism of complexation reaction, ion exchange and electrostatic interaction. On the other hand, Pb2+ is first adsorbed on PSMPs by electrostatic action and indirectly adsorbed on HA in the form of PSMPs-Pb2+ owing to the interaction between HA and PSMPs, which increases the adsorption amount of Pb2+ on HA. This study is significant for studying the migration and regression of heavy metal cation contaminants when PSMPs co-exist with DOM in an aqueous environment.

Manganese oxides mediated dissolve organic matter compositional changes in lake sediment and cadmium binding characteristics

In sediment environments, manganese (Mn) minerals have high dissolved organic matter (DOM) affinities, and could regulate the changes of DOM constituents and reactivity by fractionation. However, the effects of DOM fractionation by Mn minerals on the contaminant behaviors remain unclear. Herein, the transformations of mineral phases, DOM properties, and Cd(II) binding characteristics to sediment DOM before and after adsorption by four Mn oxides (δ-MnO₂, β-MnO₂, γ-MnOOH, and Mn₃O₄) were investigated using multi-spectroscopic tools. Results showed a subtle structural variation of Mn oxides in response to DOM reduction, and no phase transformations were observed. Two-dimensional correlation spectroscopy based on synchronous fluorescence spectra and Fourier transform infrared spectroscopy indicated that tryptophan-like substances and the amide (II) N-H groups could preferentially interact with Cd(II) for the original DOM. Nevertheless, preferential bonding of Cd(II) to tyrosine-like substances and phenolic OH groups was exhibited after fractionations by Mn oxides. Furthermore, the binding stability and capacity of each DOM fraction to Cd(II) were decreased after fractionation based on the modified Stern-Volmer equation. These differences may be attributed to DOM molecules with high aromaticity, hydrophobicity, molecular weight, and amounts of O/N-containing group were preferentially removed by Mn oxides. Overall, the environmental hazard of Cd will be more severe after DOM fractionation on Mn minerals. This study facilitates a better understanding of the Cd geochemical cycle in lake sediments under the DOM-mineral interactions, and recommends being careful with outbreaks of aquatic Cd pollution when sediments are rich in dissolved protein-like components and Mn minerals.

Interaction between biochar-dissolved organic matter and chlorophenols during biochar adsorption

Biochar (BC) has been widely applied in the remediation of chlorophenols (CPs) from contaminated sites in which the role and mechanisms of BC dissolved organic matter (BDOM), as a crucial component of BC, with CPs are largely unknown and thus need to be investigated. In this study, DOM was derived from peanut hulls (PDOM) and corn stalks (CDOM) as BC sources, and the interactions between PDOM/CDOM and 2,4,6-trichlorophenol (TCP) were analysed using excitation-emission matrix spectroscopy (EEM) in combination with multiple models. EEM combined with fluorescence region integration (EEM-FRI) indicated that humic-like materials were the major materials of both PDOM and CDOM (percentage fluorescence response R_i,n > 60%), and CDOM contained more protein- and fulvic-like materials than PDOM. Based on EEM in combination with parallel factor analysis (EEM-PARAFAC), 4 components were obtained, and the percentage decrease in maximum fluorescence intensities (F_max) showed that the main components interacting with TCP in PDOM/CDOM were protein- and fulvic-like components (> 25%). Moreover, the modified Stern-Volmer model was used to calculate the stability constants (Log K_TCP) of PDOM/CDOM and TCP for the first time, and the mechanism of static quenching was dominant for interacting with TCP in PDOM (Log K_TCP: 4.36-4.65) and CDOM (Log K_TCP: 3.53-4.73). Furthermore, the sequential TCP binding of fluorescent components in BDOM generally followed the order of protein-like → short-wavelength fulvic-like → long-wavelength fulvic-like → humic-like components. These findings will provide a basis for screening biochar as a functional material for CP remediation applications and for understanding the environmental chemical behaviour of leached DOM during biochar application.

Novel insights into the temporal molecular fractionation of dissolved black carbon at the iron oxyhydroxide - water interface

As the most reactive and mobile fraction of black carbon, dissolved black carbon (DBC) inexorably interacts with minerals in the biosphere. Nevertheless, the research on the mechanisms and compositions of DBC assembly at the mineral-water interface remains limited. In this study, we revealed the "kinetic architecture" of DBC on iron oxyhydroxide at novel insights based on quantitative and qualitative approaches. The results indicated that high molecular weight, highly unsaturated, oxygen-rich (such as carboxyl-rich fraction, phenolics), aliphatics, and long C chains compounds were preferentially adsorbed on the iron oxyhydroxide. 2D-COS analyses directly disclosed the sequential fractionation: aromatic and phenolic groups > aliphatic groups, and few aromatics were continuously adsorbed after the rapid adsorption. Quantitative determinations identified that aromatic and phenolic components were adsorbed rapidly over the first 60 min, while aromatics achieved the dynamic equilibrium until ∼300 min, which was consistent with the 2D-COS observations. Our findings supported the hypothesis that "mineral-OM" and "OM-OM" interactions worked simultaneously, and the adsorption might be co-driven by ligand exchange, hydrophobic interactions, and other mechanisms. This work provided the theoretical basis for organic carbon storage and turnover, and it was valuable for predicting the behaviors and fates of contaminants at the soil-water interface and surface water.

Continuing progress in the field of two-dimensional correlation spectroscopy (2D-COS): Part III. Versatile applications

In this review, the comprehensive summary of two-dimensional correlation spectroscopy (2D-COS) for the last two years is covered. The remarkable applications of 2D-COS in diverse fields using many types of probes and perturbations for the last two years are highlighted. IR spectroscopy is still the most popular probe in 2D-COS during the last two years. Applications in fluorescence and Raman spectroscopy are also very popularly used. In the external perturbations applied in 2D-COS, variations in concentration, pH, and relative compositions are dramatically increased during the last two years. Temperature is still the most used effect, but it is slightly decreased compared to two years ago. 2D-COS has been applied to diverse systems, such as environments, natural products, polymers, food, proteins and peptides, solutions, mixtures, nano materials, pharmaceuticals, and others. Especially, biological and environmental applications have significantly emerged. This survey review paper shows that 2D-COS is an actively evolving and expanding field.

Characterising the interactions between Cu(II) and fulvic acid subcomponents using differential fluorescence spectroscopy combined with parallel factor analysis

Fulvic acid (FA) consists of various organic compounds that interact with metals in the aquatic environment. Interactions between subcomponents (FA3, FA5, FA7, FA9 and FA13) of FA and Cu(II) were investigated using fluorescence quenching titration by coupling differential fluorescence spectroscopy (DFS) and parallel factor analysis (PARAFAC). The material fluorescence intensities derived from FA subcomponents decreased with Cu(II) concentration increase, and stronger quenching was experienced at low Cu(II) concentrations. Humic-like materials of FA3 and protein-like materials of FA9 have relatively higher presence of carboxylic groups with greater molecular polarity, and preferential interaction of Cu(II) occurs. Fluorescence DFSs can be successfully broken down into five components as follows: fulvic-like components of a major compound containing carboxylic-like and phenolic-like groups, fulvic-like components of a major compound containing groups of other components, humic-like components of a major compound containing carboxylic-like and phenolic-like groups, humic-like components of a major compound containing carboxylic-like groups, and protein-like components. The fulvic-like components of a major compound containing carboxylic-like and phenolic-like groups exhibited stronger quenching with Cu(II) in five FA subcomponents. Static quenching is the dominant mechanism for the binding of Cu(II) by the FA subcomponent. The log K of quenching constants fitted using the modified Ryan-Weber equation (R2 = 0.9368-0.9985) ranged from 4.32 to 6.14 for five components derived from FA subcomponents. Subcomponents that were eluted earlier exhibited stronger binding affinity with Cu(II).

Insight into the Soil Dissolved Organic Matter Ligand-Phenanthrene-Binding Properties Based on Parallel Faction Analysis Combined with Two-Dimensional Correlation Spectroscopy

Dissolved organic matter (DOM) can strongly bind to organic contaminants and control phenanthrene in soil. Herein, four individual parallel factor analysis (PARAFAC) components were found in soil DOM. Component C1 was the humic-like component ligand T, and component C2 was a combination of humic fluorophore ligands M1 and M2. Furthermore, components C3 and C4 were characterized as terrestrial and ubiquitous humic substances. Then, the modified Stern-Volmer complexation model was used to reveal soil DOM component-phenanthrene-binding properties. The overall binding characteristics of a PARAFAC component could not express the phenanthrene-binding properties. Therefore, two-dimensional correlation spectroscopy was used to reveal DOM ligand-phenanthrene-binding properties. After binding with phenanthrene, DOM ligands T, M2, A2, and C1 were quenched but DOM ligands M1, A1, and C2 were excited. The ligands with higher humification presented higher phenanthrene-binding ability. With these promising results, the DOM ligand-phenanthrene-binding characteristics offered theoretical support for soil pollution control.

Heterogeneous Dynamic Behavior and Synergetic Evolution Mechanism of Internal Components and Released Gases during the Pyrolysis of Aquatic Biomass

Evolution of gaseous contaminants from biomass pyrolysis has drawn increasing attention. However, the thermal degradation, dynamics, and synergetic evolution mechanisms during real-time biomass pyrolysis remain unclear. Herein, a novel method using thermogravimetry-Fourier transform infrared spectrometry-gas chromatography/mass spectrometry (TG-FTIR-GC/MS) combined with thermal kinetics and two-dimensional correlation spectroscopy was proposed to explore the chemical properties and temperature response mechanisms of gaseous species released during Phragmites communis (PC) and Typha angustifolia (TA) pyrolysis. The thermal degradation mechanisms of PC/TA pyrolysis were mainly associated with the sigmoidal rate and random nucleation mechanisms. The formation intensities of alcohols/ethers, phenols/esters, acids, aldehydes, and ketones were higher during low-temperature TA pyrolysis and high-temperature PC pyrolysis. The average carbon oxidation state (OS¯C) of gaseous species mainly ranged from -1.5 to -0.5, and the OS¯C slope of most gaseous species was greater than -2.0, which was related to the reduction of aldehyde/ketone groups. Two-dimensional (2D)-TG-FTIR-COS analysis revealed that the sequential temperature response of gaseous species followed: acids → phenols, esters → aldehydes → hydrocarbons → alcohols, ethers → aromatics during PC/TA pyrolysis. The establishment of relationships between the sequential response of gases and degraded components provides an important basis for online monitoring/recovery of gaseous contaminants during biomass pyrolysis.

Characterization of mercury binding to different molecular weight fractions of dissolved organic matter

Dissolved organic matter (DOM) can strongly complex with various contaminants. Therefore, DOM was deemed as an environmentally friendly substance for controlling the mobility, bioavailability, speciation, toxicity, and fate of metal contaminants in environment. In this study, composting-derived DOM was categorized into three fractions based on different molecular weights (MWs). Furthermore, parallel faction analysis (PARAFAC), two-dimensional correlation spectroscopy (2DCOS), and a complexation model were employed to reveal the contaminate-binding characterization. Two PARAFAC fluorescence components were identified in the MW < 1 kDa and the 1 kDa < MW < 5 kDa fractions, respectively. In the MW > 5 kDa fraction, three PARAFAC components were identified. Protein-like component C5 did not have the Hg²⁺-binding ability. Moreover, the results showed that not all the DOM ligands could bind with contaminants, but a high humification degree of composting DOM ligands could strongly bind Hg²⁺. In addition, DOM ligand with a low humification degree DOM ligands presented a higher Hg²⁺-binding speed. Subsequently, DOM from different MWs DOM could be applied separately to the different pollution forms. With these promising results, the different DOM ligand-Hg²⁺-binding properties were characterized to provide theoretical support for environmental pollution control.

Fulvic acid-like substance-Ca(II) complexes improved the utilization of calcium in rice: Chelating and absorption mechanism

Water-soluble chelated calcium has been widely used in agriculture as a fertilizer to improve the absorption and utilization of calcium by plants. This paper prepared a new organic mineral fertilizer, based on fulvic acid-like substance chelated calcium (PFA-Ca²⁺ complex), using optimal parameters (i.e., pH, time, temperature, and Ca²⁺ concentration) to achieve a high chelation efficiency. The absorption, utilization, and distribution of the PFA-Ca²⁺ complex in rice roots were analyzed using laser scanning confocal microscopy (LSCM). Our results demonstrated that the optimal PFA-Ca²⁺ complex chelating efficiency (87%) was achieved at an initial Ca²⁺ concentration of 0.1 mol L^-1, an equilibration time of 120 min, a pH of 5.0, and a temperature of 40 °C. The chelating reaction of a fulvic acid-like substance with Ca²⁺ primarily occurred on phenol hydroxyl, alcohol hydroxyl, and carboxyl groups. The PFA-Ca²⁺ complex was primarily enriched in the roots' pericycle, cortical, and epidermis cells, in both chelating and non-chelating forms. To our knowledge, this is the first report investigating how the PFA-Ca²⁺complex affects transformation in plants, which has significant implications for research on plant nutrition and nutrient distribution.

Simultaneous bio-reduction of nitrate and Cr(VI) by mechanical milling activated corn straw

Abundant lignocellulose waste is an ideal energy source for environmental bioremediation, but its recalcitrance to bioavailability makes this a challenging prospect. We hypothesized that the disruption of straw's recalcitrant structure by mechanochemical ball milling would enhance its availability for the simultaneous bioreduction of nitrate and Cr(VI). The results showed that the ball-milling process increased the quantity of water-soluble organic matter released from corn straw and changed the composition of organic matter by strongly disrupting its lignocellulose structure. The increase in ball-milling time increased the specific surface area of the straw and favored the adhesion of microorganisms on the straw surface, which enhanced the bioavailability of the energy in the straw. Substantially increased removal of NO₃^--N (206.47 ± 0.67 mg/g) and Cr(VI) (37.62 ± 0.09 mg/g) was achieved by using straw that was ball milled for 240 min, which validated that ball milling can improve the utilization efficiency of straw by microorganisms. Cellular and molecular biological analyses showed that ball-milled straw increased microbial energy metabolism and cellular activity related to the electron transport chain. This work offers a potential way to achieve the win-win goal of utilizing agricultural wastes and remediating environmental pollution.

Spectroscopic characterization of dissolved organic matter from macroalgae Ulva pertusa decomposition and its binding behaviors with Cu(II)

Dissolved organic matter (DOM) from macroalgae is regarded a crucial source of autochthonous DOM in coastal ocean. In the present study, the characteristics of DOM from the macroalgae Ulva pertusa decomposition (U. pertusa-DOM) and its binding behaviors with Cu(II) using multiple spectroscopic techniques and chemometric analyses. The labile U. pertusa-DOM could be consumed and transformed by microorganisms. The absorption spectroscopic descriptors indicate that the hydrophobicity, aromaticity, and molecular weight of the U. pertusa-DOM increase during the 27-day incubation period. Fluorescence excitation-emission matrix spectroscopy combined with parallel factor analysis suggests that the relative abundance of the protein-like component (C1) (96.10-84.96%) sequentially decreases, whereas the humic-like components (C2) (2.16-9.73%) and (C3) (1.75-5.31%) in the U. pertusa-DOM increase with the U. pertusa decomposition. The Cu(II) binding properties of the U. pertusa-DOM are dependent on the decomposition time. The order of the conditional stability constant (logK_M) is C2 > C1 > C3. The complexation capacity (f) of C1 is higher than those of C2 and C3 at a specific time. Synchronous fluorescence spectroscopy coupled with two-dimensional correlation spectroscopy reveals that the microbial degradation could accelerate the Cu(II) binding to humic-like fractions in the U. pertusa-DOM. These findings will help us better understand the biogeochemical behaviors of macroalgal DOM and heavy metal in coastal ecosystems.

Novel Insights into the Molecular-Level Mechanism Linking the Chemical Diversity and Copper Binding Heterogeneity of Biochar-Derived Dissolved Black Carbon and Dissolved Organic Matter

Biochar-derived dissolved black carbon (DBC) varies in chemical composition and significantly affects the environmental fate of metal ions. However, the intrinsic molecular composition of DBC fractions and their molecular interaction mechanisms with metal ions remain unclear. We propose a novel, molecular-level covariant binding mechanism to comparatively interpret the heterogeneities, active sites, and sequential responses of copper binding with molecular compounds in DBC and natural dissolved organic matter (DOM). Relatively large proportions of lipid/aliphatic/peptide-like compounds with low mass distributions and lignin-like compounds with oxidized/unsaturated groups existed in acidic- and alkaline-extracted DBC, respectively. A larger percentage of tannin-like/condensed aromatic compounds and higher average conditional stability constants (logK̅_Cu) of visible fluorescent components were found for DOM than for DBC. Overall, 200-320 Da and 320-480 Da molecular components contributed significantly to the logK̅_Cu values of UVA and visible fluorescent components, respectively, in DBC/DOM. Nitrogenous groups likely exhibited stronger binding affinities than phenolic/carboxylic groups. The sequential copper-binding responses of molecular compounds in DBC/DOM generally followed the order lipid/aliphatic/peptide-like compounds → tannin-like compounds → condensed aromatic compounds. These insights will improve the prediction of the potential effects of DBC on various contaminants and the risks of biochar application to ecosystems.

Insight into binding characteristics of copper(II) with water-soluble organic matter emitted from biomass burning at various pH values using EEM-PARAFAC and two-dimensional correlation spectroscopy analysis

The metal-binding characteristics of water-soluble organic matter (WSOM) emitted from biomass burning (BB, i.e., rice straw (RS) and corn straw (CS)) with Cu(II) under various pH conditions (i.e., 3, 4.5, and 6) were comprehensively investigated. Two-dimensional correlation spectroscopy (2D-COS) and excitation-emission matrix (EEM) -PARAFAC analysis were applied to investigate the binding affinity and mechanism of BB WSOM. The results showed that pH was a sensitive factor affecting binding affinities of WSOM, and BB WSOMs were more susceptible to bind with Cu(II) at pH 6.0 than pH 4.5, followed by pH 3.0. Therefore, the Cu(II)-binding behaviors of BB WSOMs at pH 6.0 were then investigated in this study. The 2D-absorption-COS revealed that the preferential binding with Cu(II) was in the order short and long wavelengths (237-239 nm and 307-309 nm) > moderate wavelength (267-269 nm). The 2D-synchronous fluorescence-COS results suggested that protein-like substances generally exhibited a higher susceptibility and preferential interaction with Cu(II) than fulvic-like substances. EEM-PARAFAC analysis demonstrated that protein-like (C1) substances had a greater complexation ability than fulvic-like (C2) and humic-like (C3) substances for both BB WSOM. This indicated that protein-like substances within WSOM played dominant roles in the interaction with Cu(II). As a comparison, RS WSOM generally showed stronger complexation capacity than CS WSOM although they exhibited similar chemical properties and compositions. This suggested the occurrence of heterogeneous active metal-binding sites even within similar chromophores for different WSOM. The results enhanced our understanding of binding behaviors of BB WSOM with Cu(II) in relevant atmospheric environments.

A DFT study of fulvic acid binding with bivalent metals: Cd, Cu, Mg, Ni, Pb, Zn

3,7,8-Trihydroxy-3-methyl-10-oxo-4,10-dihydro-1H,3H-pyrano [4,3-b]chromene-9-carboxylic acid is a structurally well-characterized fulvic acid (FA) capable to act as a polyfunctional bidentate ligand in the complexes with metal ions. Investigations of the formation mechanisms and structure of the above-mentioned FA complexes with bivalent metals [Cd(II), Cu(II), Mg(II), Ni(II), Pb(II) and Zn(II)] are presently an actual and trending topic in the modern chemistry of humic and fulvic acids. Furthermore, the importance of the theoretical DFT investigations of binding of metals with fulvic acids is stipulated by the lack of the relevant experimental structural data for such complexes. The quantum chemical calculations have shown that, of the four possible FA tautomers, the two FA forms are more stable. The wavefunction analysis and computed reactivity descriptors (electrostatic potential, Hirshfeld surface analysis, natural population analysis charges, and condensed Fukui indexes) give the insight on the properties and reactive ability of these two different forms of the FA. The computed thermochemical parameters of the ion-exchange reaction explain the metal binding affinity and selectivity of the FA forms.

Enhanced adsorption of antimonate by ball-milled microscale zero valent iron/pyrite composite: adsorption properties and mechanism insight

Ball-milling is considered as an economical and simple technology to produce novel engineered materials. The ball-milled microscale zero valent iron/pyrite composite (BM-ZVI/FeS₂) had been synthesized through ball-milling technology and applied for highly efficient sequestration of antimonate (Sb(V)) in aqueous solution. BM-ZVI/FeS₂ exhibited good Sb(V) removal efficiency (≥ 99.18%) at initial concentration less than 100 mg Sb(V)/L. Compared to ball-milled zero valent iron (ZVI) and pyrite (FeS₂), BM-ZVI/FeS₂ exhibited extremely higher removal efficiency due to the good synergistic adsorption effect. BM-ZVI/FeS₂ showed efficient removal performance at broad pH (2.6-10.6). Moreover, the coexisting anions had negligible inhibition influence on the Sb(V) removal. The antimony mine wastewater can be efficiently remediated by BM-ZVI/FeS₂, and the residual Sb(V) concentrations (< 0.96 μg/L) can meet the mandatory discharge limit in drinking water (5 μg Sb/L). Experimental and model results demonstrated that endothermic reaction and chemisorption were involved in Sb(V) removal by BM-ZVI/FeS₂. The XRD and XPS analyses confirmed that the complete corrosion of ZVI occurred on BM-ZVI/FeS₂ after Sb(V) adsorption, resulting in the enhanced Sb(V) sequestration. Mechanism analyses showed that the excellent removal performance of BM-ZVI/FeS₂ was ascribed to the high coverage of iron (hydr)oxide oxidized from ZVI. Because of the advantages of economical cost, high Sb(V) removal capacity and easy availability, BM-ZVI/FeS₂ offers a promising adsorbent for Sb(V) remediation.

Investigation of eluted characteristics of fulvic acids using differential spectroscopy combined with Gaussian deconvolution and spectral indices

The characteristics of subfractions of soil fulvic acid (FA₃, FA₅, FA₇, FA₉, and FA₁₃) using stepwise elution from XAD-8 resin with pyrophosphate buffers were investigated by differential absorption spectroscopy (DAS) and differential fluorescence spectroscopy (DFS) combined with mathematical deconvolution and spectral indices. The log-transformed absorbance spectra (LTAS) exhibited three regions for both acidic-buffer-eluted subfractions (AESF) and neutral-buffer-eluted subfraction (NESF) and four regions for basic-buffer-eluted subfractions (BESF) according to the differences in spectral slopes. The DAS spectra of FA subfractions were closely fitted with seven Gaussian bands with maxima location at 199.66, 216.18 ± 1.50, 246.20 ± 3.85, 285.22 ± 7.26, 345.64 ± 5.30, 389.27, and 307.37 nm, respectively (R² > 0.993). The content of salicylic-like and carboxyl groups in FA subfractions decreased, while the phenolic chromophore increased with elution sequence. From the 11 spectral indices, AESF had greater molecular weight, condensation, polymerization, hydroxyl radical production, humification degree, and terrigenous contribution, as well as contained more conjugated aromatic structures and less N-containing groups than NESF and BESF. The humification degree and humic characters of FA subfractions were closely associated to the aromaticity, molecular condensation, and DOM-metal-bound functional groups. The proper separation of FA into subfractions is beneficial for reducing its complexity and heterogeneity, which helps us to further explore its chemical properties and interactions with various contaminants in soil environments. Graphical abstract.

Simulated photo-degradation of dissolved organic matter in lakes revealed by three-dimensional excitation-emission matrix with regional integration and parallel factor analysis

Simulated photo-degradation of fluorescent dissolved organic matter (FDOM) in Lake Baihua (BH) and Lake Hongfeng (HF) was investigated with three-dimensional excitation-emission matrix (3DEEM) fluorescence combined with the fluorescence regional integration (FRI), parallel factor (PARAFAC) analysis, and multi-order kinetic models. In the FRI analysis, fulvic-like and humic-like materials were the main constituents for both BH-FDOM and HF-FDOM. Four individual components were identified by use of PARAFAC analysis as humic-like components (C1), fulvic-like components (C2), protein-like components (C3) and unidentified components (C4). The maximum 3DEEM fluorescence intensity of PARAFAC components C1-C3 decreased by about 60%, 70% and 90%, respectively after photo-degradation. The multi-order kinetic model was acceptable to represent the photo-degradation of FDOM with correlation coefficient (R_adj²) (0.963-0.998). The photo-degradation rate constants (k_n) showed differences of three orders of magnitude, from 1.09 × 10^-6 to 4.02 × 10^-4 min^-1, and half-life of multi-order model ( T_1/2ⁿ) ranged from 5.26 to 64.01 min. The decreased values of fluorescence index (FI) and biogenic index (BI), the fact that of percent fluorescence response parameter of Region I (P_I,n) showed the greatest change ratio, followed by percent fluorescence response parameter of Region II (P_II,n), while the largest decrease ratio was found for C3 components, and the lowest T_1/2ⁿ was observed for C3, indicated preferential degradation of protein-like materials/components derived from biological sources during photo-degradation. This research on the degradation of FDOM by 3DEEM/FRI-PARAFAC would be beneficial to understanding the photo-degradation of FDOM in natural environments and accurately predicting the environmental behaviors of contaminants in the presence of FDOM.