Microplastic pollution in deep-sea sediments and organisms of the Western Pacific Ocean

A review of plastic debris in the South American Atlantic Ocean coast - Distribution, characteristics, policies and legal aspects

The presence of plastics in the oceans has already become a pervasive phenomenon. Marine pollution by plastics surpasses the status of an emerging threat to become a well-established environmental problem, boosting research on this topic. However, despite many studies on the main seas and oceans, it is necessary to compile information on the South American Atlantic Ocean Coast to identify the lack of research and expand knowledge on marine plastic pollution in this region. Accordingly, this paper conducted an in-depth review of monitoring methods, sampling, and identification of macroplastics and microplastics (MPs) in water, sediments, and biota, including information on legal requirements from different countries as well as non-governmental initiatives. Brazil was the country with the highest number of published papers, followed by Argentina. MPs accounted for 75 % of the papers selected, with blue microfibers being the most common morphology, whereas PE and PP were the most abundant polymers. Also, a lack of standardization in the methodologies used was identified; however, the sites with the highest concentrations of MPs were the Bahía Blanca Estuary (Argentina), Guanabara Bay (Brazil), and Todos os Santos Bay (Brazil), regardless of the method applied. Regarding legislation, Uruguay and Argentina have the most advanced policies in the region against marine plastic pollution due to their emphasis on the life cycle and the national ban on certain single-use plastics. Therefore, considering its content, this expert review can be useful to assist researchers dealing with plastic pollution along the South American Atlantic Ocean Coast.

Effect of alternative natural diet on microplastic ingestion, functional responses and trophic transfer in a tri-trophic coastal pelagic food web

The patchy distribution of microplastics (MP) and their size range similar to planktonic organisms, are likely to have major ecological consequences, through MP ingestion, food dilution, and transfer across trophic levels. Our study applied a community module using tritrophic food chain with zooplankton as prey, and a planktivorous seabass fry as predator. We conducted a series of feeding experiments and recorded the direct uptake of MP under six different concentrations ranging from 25 to 800 particles L-1. We also estimated the indirect transfer of MP via trophic link. The ingestion rates for Brachionus plicatilis, Mesocyclops isabellae, and Lates calcarifer, were 3.7 ± 0.3 MP ind-1 min-1, 1.69 ± 0.1 MP ind-1 min-1, and 3.51 ± 0.52 MP ind-1 h-1, respectively. In the presence of a natural diet, rotifers and copepods ingested significantly lower number, whereas, fish fry ingested a higher number of MP, suggesting further vulnerability to the consumers of MP-contaminated fish and potential biomagnification at higher trophic levels. Overall, the MP uptake rate increased with increasing concentration, and finally leveled off, indicating a type II functional response to MP concentration. The presence of natural diet led to a lower Km value. In the indirect transfer experiment, 74 % of B. plicatilis and 78 % of M. isabellae individuals were contaminated with MP, when offered as prey. Brachionid mastax and MP particles were observed in the gut of copepods. The fish fry gut content also recorded brachionid mastax, MP-contaminated copepods, and MP particles, showing direct evidence of trophic transfer pointing to a cascading effect on higher trophic levels including humans via piscivory.

Role of light microplastics in the dispersion process of spilled crude oil in the marine environment

Oil spill and microplastic (MP) pollution are the main problems in the marine environment. After an oil spill, the oil film may be dispersed into the water column in the form of droplets under the action of ocean waves. In this study, the sea condition was simulated through the batch conical flask oscillation experiment. Merey crude oil was selected as experimental oil, and polyethylene (PE) and polystyrene (PS) were used as experimental MP. The effects of MP properties (type, concentration and size) on the dispersion of spilled oil were investigated. It is found that for each MP, the oil dispersion efficiency (ODE) increased rapidly at first and then tended to be stable, which all reached the maximum at 360 min. When the concentrations of PE and PS increased from 0 to 100 mg/L, the maximum ODE decreased from 32.64 % to 13.72 % and 10.75 %, respectively, indicating that the presence of MP inhibits the oil dispersion. At the same oscillation time, the volumetric mean diameter (VMD) of dispersed oil increased with the MP concentration. When the particle size of PE and PS increased from 13 to 1000 μm, the maximum ODE increased from 24.74 % to 31.49 % and 28.60 %, respectively. However, the VMD decreased with the size of MP. In addition, the time series of the oil adsorption rate by the MP were well fitted by the kinetic models. The results of this research deepen the understanding of the migration law of spilled oil to the marine environment in the presence of MP, and may further improve the ability of marine environmental scientists to predict the fate of oil spill.

Assessment of microplastics in coastal ecosystem of Bangladesh

Microplastics (MPs) pose one of the major environmental threats to marine organisms and ecosystems on a global scale. The present study investigated MPs in surface water, beach sediments, and fish in two coastal areas of Bangladesh namely Cox's Bazar and Kuakata. The MPs were identified and characterized using three different techniques, including the binocular microscope, the ATR-FTIR (Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy), and SEM-EDS (Scanning Electron Microscopy- Energy Dispersive Spectroscopy). The number of MPs in seawater was 10.1 ± 3.10 and 8.52 ± 3.92 items/100 L and in beach sediment, 13.2 ± 3.68 and 9.48 ± 3.63 items/100 g in Cox's Bazar and Kuakata, respectively. In fish samples, the abundance of MPs was 7.82 ± 1.28 and 6.82 ± 1.87 items/individual species of Cox's Bazar and Kuakata, respectively, where the highest quantities of MP were found in Euthynnus affinisand Sillago sihama and the lowest in Terapon jarbua and Pampus chinensisin Cox's Bazar and Kuakata, respectively. The number of MPs in GITs (Gastrointestinal tracts) was 1.63 ± 0.991 and 1.25 ± 0.546 items/g GIT and in BW (Body Weight) were 0.042 ± 0.014 and 0.037 ± 0.014 items/g BW in Cox's Bazar and Kuakata, respectively. There revealed a positive correlation between MP abundance and GIT weight and body weight in fish species. MPs were predominantly fiber-shaped, white/transparent, and small size. The most common MP polymers were polyethylene and polypropylene. SEM images of MPs demonstrate surface roughness, cracks, mechanical weathering and oxidative weathering, demonstrating their ongoing environmental exposure. The EDS spectrum unearthed that the MPs contained several elements (C, N, O, Na, Al, Fe, and Si). Findings from this study might be useful in coastal plastic particle management and to mitigate the potential risks associated with them.

Understanding and addressing microplastic pollution: Impacts, mitigation, and future perspectives

Improper disposal of household and industrial waste into water bodies has transformed them into de facto dumping grounds. Plastic debris, weathered on beaches degrades into micro-particles and releases chemical additives that enter the water. Microplastic contamination is documented globally in both marine and freshwater environments, posing a significant threat to aquatic ecosystems. The small size of these particles makes them susceptible to ingestion by low trophic fauna, a trend expected to escalate. Ingestion leads to adverse effects like intestinal blockages, alterations in lipid metabolism, histopathological changes in the intestine, contributing to the extinction of vulnerable species and disrupting ecosystem balance. Notably, microplastics (MPs) can act as carriers for pathogens, potentially causing impaired reproductive activity, decreased immunity, and cancer in various organisms. Studies have identified seven principal sources of MPs, including synthetic textiles (35%) and tire abrasion (28%), highlighting the significant human contribution to this pollution. This review covers various aspects of microplastic pollution, including sources, extraction methods, and its profound impact on ecosystems. Additionally, it explores preventive measures, aiming to guide researchers in selecting techniques and inspiring further investigation into the far-reaching impacts of microplastic pollution, fostering effective solutions for this environmental challenge.

Occurrence of microplastics in the Haima cold seep area of the South China Sea

The pollution of deep-sea microplastics has received increasing attention. As a special ecosystem in the deep sea, the cold seep area is of great significance for studying the distribution of microplastics in the deep sea. In this work, the distribution and characteristics of microplastics in seawater, sediments, and shellfish in the Haima cold seep area and the correlation between the characteristics of microplastics in different media and the type of media were studied. Microplastics were found in all three media. The abundance of microplastics in different samples from the Haima cold seep area ranged 1.8-3.8 items/L for the seawater, 11.47-96.8 items/kg (d.w.) for the surface sediments, and 0-5 items/individual (0-0.714 items/g) for the shellfish. The amount of microplastics ingested by shellfish varied among different species. The microplastics in these three media were mainly fibrous, dark-colored, small-sized rayon, polyethylene terephthalate (PET), and polyethylene (PE). In the correlation analysis of microplastic characteristics among the three media, it was found that the characteristics of microplastics in different media in the same area were closely related, and each pair of variables showed a significant positive correlation (P ≤ 0.05). The distinctive geographical conditions would accelerate the interchange of microplastics among various media. Principal component analysis showed that habitat contribute to microplastic feature differences in shellfish. Differences in correlation were observed between the characteristics of shellfish microplastics in different regions and the characteristics of microplastics in surrounding seawater and sediments.

Assessment of microplastic presence in coastal environments and organisms of Da Nang, Vietnam

This study investigates the presence of microplastics (MPs) in seawater, sediments, and organisms along the coastal areas of Da Nang, Vietnam. The results obtained revealed MP concentrations ranging from 111 to 304 MPs/L in seawater and 2267 to 4600 MPs/kg in sediment. In organisms such as oysters, mussels, crabs, snails, and fish, MP levels ranged from 1.8 to 17.3 MPs/g (wet weight). Fiber MPs were found to be predominant across seawater, sediment, and organisms. The study identified eight, ten, and eleven types of MPs in seawater, sediment, and organisms, respectively, with Nylon, Polytetrafluoroethylene (PTFE), and Ethylene vinyl alcohol (EVOH) being the most prevalent. Notably, MP concentrations were significantly higher in benthic organisms such as oysters, mussels, and crabs compared to fish (t-test, p < 0.05), suggesting habitat dependency. Similar concentrations, shapes, and types of MPs in seawater, sediments, and organisms demonstrate a tendency for MP accumulation in aquatic organisms within the marine environment.

Does the microplastics ingestion patterns and polymer composition vary across the oceanic zones? A case study from the Indian coast

This study explores microplastic (MP) presence in the gastrointestinal tracts of deep-sea fish from the Central Indian Ocean, off the Indian coast. Among the 27 species examined, 19 showed MP contamination, averaging 2.68 ± 0.30 (±SE) MPs per individual. Polymer analysis via FTIR and micro-Raman identified several types, including polyethylene terephthalate (PET), polyvinyl alcohol (PVA), polypropelene (PP), polyvinyl acetate (PVC), polyurethane (PU), polytetrafluoroethylene (PTFE), polyaniline (PANI), polymethyl methacrylate (PMMA), and polyethersulfone (PES), with PET being the most prevalent (33.33 %). MP ingestion was higher in benthopelagic fish and those at higher trophic levels, as indicated by comparisons across oceanic zones. Niche partitioning analysis suggests feeding behaviour as a primary influencer of MP ingestion in deep-sea fish rather than habitat or trophic level. The study proposes the potential use of deep-sea fish as indicators for assessing microplastic pollution across oceanic zones and deep-sea regions through bycatch monitoring.

Potential threats of microplastics and pathogenic bacteria to the immune system of the mussels Mytilus galloprovincialis

As one of the main components of marine pollution, microplastics (MPs) inevitably enter the mussel aquaculture environment. At the same time, pathogenic bacteria, especially pathogens such as Vibrio, can cause illness outbreaks, leading to large-scale death of mussels. The potential harm of MPs and pathogenic bacteria to bivalve remains unclear. This study designed two experiments (1) mussels (Mytilus galloprovincialis) were exposed to 100 particles/L or 1,000 particles/L polymethyl methacrylate (PMMA, 17.01 ± 6.74 μm) MPs and 1 × 107 CFU/mL Vibrio parahaemolyticus at the same time (14 days), and (2) mussels were exposed to 100 particles/L or 1,000 particles/L MPs for a long time (30 days) and then exposed to 1 × 107 CFU/mL V. parahaemolyticus to explore the effects of these two stresses on the mussel immune system. The results showed that after the combined exposure of V. parahaemolyticus and MPs, the lysosomal membrane stability of hemocytes decreased, lysozyme activity was inhibited, and hemocytes were induced to produce more lectins and defensins to fight pathogenic invasion. Long-term exposure to MPs caused a large amount of energy consumption in mussels, inhibited most of the functions of humoral immunity, increased the risk of mussel infection with pathogenic bacteria, and negatively affected mussel condition factor, the number of hemocytes, and the number of byssuses. Mussels may allocate more energy to deal with MPs and pathogenic bacterial infections rather than for growth. Above all, MPs exposure can affect mussel immune function or reduce its stress resistance, which in turn has an impact on mollusk farming.

Environmental impact of microplastics and potential health hazards

Microscopic plastic (microplastic) pollutants threaten the earth's biodiversity and ecosystems. As a result of the progressive fragmentation of oversized plastic containers and products or manufacturing in small sizes, microplastics (particles of a diameter of 5 mm with no lower limit) are used in medicines, personal care products, and industry. The incidence of microplastics is found everywhere in the air, marine waters, land, and even food that humans and animals consume. One of the greatest concerns is the permanent damage that is created by plastic waste to our fragile ecosystem. The impossibility of the complete removal of all microplastic contamination from the oceans is one of the principal tasks of our governing body, research scientists, and individuals. Implementing the necessary measures to reduce the levels of plastic consumption is the only way to protect our environment. Cutting off the plastic flow is the key remedy to reducing waste and pollution, and such an approach could show immense significance. This review offers a comprehensive exploration of the various aspects of microplastics, encompassing their composition, types, properties, origins, health risks, and environmental impacts. Furthermore, it delves into strategies for comprehending the dynamics of microplastics within oceanic ecosystems, with a focus on averting their integration into every tier of the food chain.

Neurotoxicity of Some Environmental Pollutants to Zebrafish

The aquatic environment encompasses a wide variety of pollutants, from plastics to drug residues, pesticides, food compounds, and other food by-products, and improper disposal of waste is the main cause of the accumulation of toxic substances in water. Monitoring, assessing, and attempting to control the effects of contaminants in the aquatic environment are necessary and essential to protect the environment and thus human and animal health, and the study of aquatic ecotoxicology has become topical. In this respect, zebrafish are used as model organisms to study the bioaccumulation, toxicity, and influence of environmental pollutants due to their structural, functional, and material advantages. There are many similarities between the metabolism and physiological structures of zebrafish and humans, and the nervous system structure, blood-brain barrier function, and social behavior of zebrafish are characteristics that make them an ideal animal model for studying neurotoxicity. The aim of the study was to highlight the neurotoxicity of nanoplastics, microplastics, fipronil, deltamethrin, and rotenone and to highlight the main behavioral, histological, and oxidative status changes produced in zebrafish exposed to them.

Trapping of microplastics and other anthropogenic particles in seagrass beds: Ubiquity across a vertical and horizontal sampling gradient

Seagrass beds can trap large amounts of marine debris leading to areas of accumulation, known as 'sinks', of anthropogenic particles. While the presence of vegetation can enhance accumulation, less is known about how the trapping effect changes from vegetated to less vegetated patches. To test this, vegetation and sediment were sampled along a vegetation percent cover gradient from the centre of seagrass beds to nearby less vegetated patches. To determine whether trapped particles can lead to increased accumulation in associated fauna, gastropods were also collected from the transects laid across this gradient. Extracted anthropogenic particles were counted and characterised. Particles were detected in all sample types and reached quantifiable limits in at least 50% of sediment and gastropod samples. There was no significant difference in the distribution of particles found in seagrass beds compared to less vegetated patches, suggesting other factors contribute to the trapping efficiency of biogenic habitats besides simply the presence or absence of vegetation.

Generation of synthetic FTIR spectra to facilitate chemical identification of microplastics

In a context where learning databases of microplastic FTIR spectra are often incomplete, the objective of our work was to test whether a synthetic data generation method could be relevant to fill the gaps. To this end, synthetic spectra were generated to create new databases. The effectiveness of machine learning from these databases was then tested and compared with previous results. The results showed that the creation of synthetic learning databases could avoid, to a certain extent, the need for learning databases of environmental microplastics FTIR spectra. However, some limitations were encountered, for example, when two different chemical classes had very similar reference spectra or when the intensities of the bands associated with fouling became too intense. The FTIR study of the ageing and fouling of microplastics in the natural environment is one of the identified ways that could further improve this approach.

Microplastic Contamination of a Benthic Ecosystem in a Hydrothermal Vent

Plastic contamination is a global pervasive issue, extending from coastal areas and open oceans to polar regions and even the deep sea. Microplastic (MP) contamination in hydrothermal vents, which are known for their high biodiversity even under extreme conditions, has remained largely unexplored. Here, we present, for the first time, MP pollution in a deep-sea hydrothermal vent at one of the biodiversity hotspots─the Central Indian Ridge. Not only the environment (seawater: 2.08 ± 1.04 MPs/L, surface sediments: 0.57 ± 0.19 MP/g) but also all six major benthic species investigated were polluted by MPs. MPs mainly consisted of polypropylene, polyethylene terephthalate, and polystyrene fragments ≤100 μm and were characterized as being either transparent or white in color. Remarkably, bioaccumulation and even biomagnification of microplastics were observed in the top predators of the ecosystem, such as squat lobsters (14.25 ± 4.65 MPs/individual) and vent crabs (14.00 ± 2.16 MPs/individual), since they contained more MPs than animals at lower trophic levels (e.g., mussels and snails, 1.75-6.00 average MPs/individuals). These findings reveal MP contamination of an ecosystem in a hydrothermal vent, thereby suggesting that their accumulation and magnification can occur in top-level animals, even within remote and extreme environments.

Integrating aggregate exposure pathway and adverse outcome pathway for micro/nanoplastics: A review on exposure, toxicokinetics, and toxicity studies

Micro/nanoplastics (MNPs) have emerged as a significant environmental concern due to their widespread distribution and potential adverse effects on human health and the environment. In this study, to integrate exposure and toxicity pathways of MNPs, a comprehensive review of the occurrence, toxicokinetics (absorption, distribution, and excretion [ADE]), and toxicity of MNPs were investigated using the aggregate exposure pathway (AEP) and adverse outcome pathway (AOP) frameworks. Eighty-five papers were selected: 34 papers were on detecting MNPs in environmental samples, 38 papers were on the ADE of MNPs in humans and fish, and 36 papers were related to MNPs toxicity using experimental models. This review not only summarizes individual studies but also presents a preliminary AEP-AOP framework. This framework offers a comprehensive overview of pathways, enabling a clearer visualization of intricate processes spanning from environmental media, absorption, distribution, and molecular effects to adverse outcomes. Overall, this review emphasizes the importance of integrating exposure and toxicity pathways of MNPs by utilizing AEP-AOP to comprehensively understand their impacts on human and ecological organisms. The findings contribute to highlighting the need for further research to fill the existing knowledge gaps in this field and the development of more effective strategies for the safe management of MNPs.

Environmental and ecological risk of microplastics in the surface waters and gastrointestinal tract of skipjack tuna (Katsuwonus pelamis) around the Lakshadweep Islands, India

The presence of microplastics (MPs) in marine ecosystems is widespread and extensive. They have even reached the deepest parts of the ocean and polar regions. The number of articles on plastic pollution has increased in recent years, but few have investigated the MPs from oceanic islands which are biodiversity hotspots. We investigated the possible microplastic contamination their source and characteristics in surface waters off Kavaratti Island and in the gastrointestinal tract (GT) of skipjack tuna, Katsuwonus pelamis collected from Kavaratti Island of the Lakshadweep archipelago. A total of 424 MP particles were isolated from the surface water samples collected from off Kavaratti Island with an average abundance of 5 ± 1nos./L. A total of 117 MPs were recovered from the GT of skipjack tuna from 30 individual fishes. This points to a potential threat of MP contamination in seafood around the world since this species has a high value in local and international markets. Fiber and blue color were the most common microplastic morphotypes and colors encountered, respectively, both from surface water and GT of fish. Smaller MPs (0.01-1 mm) made up a greater portion of the recovered materials, and most of them were secondary MPs. Polyethylene and polypropylene were the most abundant polymers found in this study. The Pollution Load Index (1.3 ± 0.21) of the surface water and skipjack tuna (1 ± 0.7) indicates a minor ecological risk for the coral islands, while the Polymer Hazard Index highlights the ecological risk of polymers, even at low MP concentrations. This pioneer study sheds preliminary light on the abundance, properties, and environmental risks of MPs to this highly biodiverse ecosystem.

Current patterns and trends of microplastic pollution in the marine environment: A bibliometric analysis

Microplastics are pervasive in the natural environment and pose a growing concern for global health. Plastic waste in marine environments has emerged as a global issue, threatening not only marine biota but also human health due to its implications for the food chain. This study aims to discern the patterns and trends of research, specifically on Marine Microplastic Pollution (MMP), based on a bibliometric analysis of scientific publications from 2011 to 2022. The methodology utilized in this study comprises three stages: (a) creating a bibliographical dataset from Scopus by Elsevier and the Web of Science Core Collection by Clarivate Analytics, (b) analyzing current research (trends and patterns) using bibliometric analysis through Biblioshiny tool, and (c) examining themes and subthemes in MMP research (wastewater treatment, plastic ingestion, the Mediterranean Sea, microplastics pollution, microplastics in freshwater, microplastic ingestion, plastic pollution, and microplastic pollution in the marine environment). The findings reveal that during the studied period, the number of MMP publications amounted to 1377 articles, with an average citation per publication of 59.23 and a total citation count of 81,553. The most cited article was published in 2011, and since then, the number of publications on this topic has been increasing steadily. The author count stood at 5478, with 22 trending topics identified from the 1377 published titles. Between 2019 and 2022, the countries contributing most to the publication of MMP articles were China, the United States of America (USA), and the United Kingdom (UK). However, a noticeable shift in the origin of author countries was observed in the 2019-2022 timeframe, transitioning from a dominance by the USA and the UK to a predominance by China. In 2019, there was a substantial increase in the volume of publications addressing the topic of microplastics. The results show that the most prevalent themes and subthemes pertained to MMP in the Mediterranean Sea. The journals with the highest number of MMP articles published were the Marine Pollution Bulletin (253 articles) and Science of the Total Environment (190 articles). The analysis concludes that research on MMP remains prominent and appears to be increasing each year.

Microbial community structure and co-occurrence network stability in seawater and microplastic biofilms under prometryn pollution in marine ecosystems

Prometryn has been extensively detected in marine environment because of its widespread usage in agriculture and aquaculture and has been concerns since its serious effects on aquatic organisms. However, its impact on the microbial community in the marine ecosystem including seawater and biofilm is still unclear. Therefore, a short-term indoor microcosm experiment of prometryn exposure was conducted. This study found that prometryn had a more significant impact on the structure and stability of the microbial community in seawater compared to microplastic biofilms. Additionally, we observed that the assembly of the microbial community in biofilms was more affected by stochastic processes than in seawater under the exposure of prometryn. Our study provided evidence for the increasing impact of the microbial communities under the stress of prometryn and microplastics.

Distribution of microplastics in bathyal- to hadal-depth sediments and transport process along the deep-sea canyon and the Kuroshio Extension in the Northwest Pacific

Understanding microplastic (MP) behavior in oceans is crucial for reducing marine plastic pollution. However, the complex process underlying MP transportation to the deep seafloor remains unknown despite the deep sea being considered its major sink. We focused on MP distribution in Sagami Bay (adjacent to highly populated areas of Japan), the plate triple junction connected through the Sagami Trough, and the abyssal plain immediately below the Kuroshio Extension. We observed the highest number of MPs in the abyssal stations, more than previously reported. The polymer types and aspect ratio of MPs in the abyssal stations significantly differed from those in the bathyal/hadal stations. The study suggests that MPs accumulated in the open ocean surface layer sink to the abyssal plains immediately below it, while MPs from land sources accumulate in the bathyal depth and are transported to the hadal depth near the coast through turbidity currents along the submarine canyon.

Microplastics as vectors of other contaminants: Analytical determination techniques and remediation methods

The ubiquitous and persistent presence of microplastics (MPs) in aquatic and terrestrial ecosystems has raised global concerns due to their detrimental effects on human health and the natural environment. These minuscule plastic fragments not only threaten biodiversity but also serve as vectors for contaminants, absorbing organic and inorganic pollutants, thereby causing a range of health and environmental issues. This review provides an overview of microplastics and their effects. This work highlights available analytical techniques for detecting and characterizing microplastics in different environmental matrices, assessing their advantages and limitations. Additionally, this review explores innovative remediation approaches, such as microbial degradation and other advanced methods, offering promising prospects for combatting microplastic accumulation in contaminated environments. The focus on environmentally-friendly technologies, such as the use of microorganisms and enzymes for microplastic degradation, underscores the importance of sustainable solutions in plastic pollution management. In conclusion, this article not only deepens our understanding of the microplastic issue and its impact but also advocates for the urgent need to develop and implement effective strategies to mitigate this critical environmental challenge. In this context, the crucial role of advanced technologies, like quantitative Nuclear Magnetic Resonance spectroscopy (qNMR), as promising tools for rapid and efficient microplastic detection, is emphasized. Furthermore, the potential of the enzyme PETase (polyethylene terephthalate esterase) in microplastic degradation is examined, aiming to address the growing plastic pollution, particularly in saline environments like oceanic ecosystems. These innovations offer hope for effectively addressing microplastic accumulation in contaminated environments and minimizing its adverse impacts.

Exploring the microplastic pollution: Unveiling origins and varieties in coastal sediments and waters of the Bushehr Province, Persian Gulf, Iran

In this study, microplastic (MP) pollution in the coastal sediments and tidal waters of Bushehr province in the Persian Gulf was comprehensively investigated. The sampling stations were selected based on their proximity to various human activities in January and February 2022, such as tourism, fishing, urban development and industry. The results showed that the abundance of MP associated with different human activities varied. The highest concentrations were observed near the petrochemical industry in Asaluyeh, followed by the densely populated Bushehr and the fishing port of Dayyer. Other areas such as Ganaveh, Deylam and Mand also showed varying levels of MP contamination. The average MP concentration was 1.67 × 104 particles/km2 in surface water and 1346.67 ± 601.69 particles/kg in dry sediment. Fiber particles were in the majority in both sediment and water samples, mainly black. The sediment samples had a size range of 100-500 μm (41.34 %), while the water samples were between 500 and 1000 μm (33.44 %). The main polymers found were polyethylene (PE) and polypropylene (PP). This assessment highlights the widespread problem of microplastic pollution in the coastal and intertidal zones of Bushehr province in the Persian Gulf.

Microplastic particles in river sediments and water of southwestern Nigeria: insights on the occurrence, seasonal distribution, composition, and source apportionment

Microplastics (MPs) are globally recognized as an emerging environmental threat, particularly in the aquatic environment. This study presents baseline data on the occurrence and distribution of MPs in sediments and surface water of major rivers in southwestern Nigeria. Microplastics were extracted by density separation and polymer identification using Fourier transformed infrared spectroscopy in attenuated total reflectance mode (FTIR-ATR). The abundance of MPs in surface sediment and water samples across all locations ranged from 12.82 to 22.90 particle/kg dw and 6.71 to 17.12 particle/L during the dry season and 5.69 to 14.38 particle/kg dw and 12.41 to 22.73 particle/L during the wet season, respectively. On average, fiber constituted the highest percentage of MP in sediments (71%) and water (67%) while foam accounted for the lowest values of 0.6% and 1.7%, respectively. Polypropylene (PP) and polyethylene (PE) were the main MPs across all locations based on Fourier transform infrared spectroscopy (FTIR). MPs of size < 1 mm were the most abundant (≥ 55%) on average in both water and sediments. The study identified run-off from human activities and industrial wastewater as potential sources of MP exposure based on positive matrix factorization. The study suggests assessing the impact of different land-use activities on MPs occurrence and distribution in addition to quantifying MPs in seafood as a way forward in food safety management systems for further studies. This study confirmed the occurrence and widespread distribution of MPs in surface water and sediments and provides a database on MP pollution in Nigeria.

Research progress on occurrence characteristics and source analysis of microfibers in the marine environment

Synthetic microfiber pollution is a growing concern in the marine environment. However, critical issues associated with microfiber origins in marine environments have not been resolved. Herein, the potential sources of marine microfibers are systematically reviewed. The obtained results indicate that surface runoffs are primary contributors that transport land-based microfibers to oceans, and the breakdown of larger fiber plastic waste due to weathering processes is also a notable secondary source of marine microfibers. Additionally, there are three main approaches for marine microplastic source apportionment, namely, anthropogenic source classification, statistical analysis, and numerical simulations based on the Lagrangian particle tracking method. These methods establish the connections between characteristics, transport pathways and sources of microplastics, which provides new insights to further conduct microfiber source apportionment. This study helps to better understand sources analysis and transport pathways of microfibers into oceans and presents a scientific basis to further control microfiber pollution in marine environments.

Microplastic pollution: Understanding microbial degradation and strategies for pollutant reduction

Microplastics are ubiquitous environmental pollutants with the potential for adverse impacts on ecosystems and human health. These particles originate from the fragmentation of larger plastic items, shedding from synthetic fibers, tire abrasions, and direct release from personal care products and industrial processes. Once released into the environment, microplastics can disrupt ecosystems, accumulate in organisms, cause physical harm, and carry chemical pollutants that pose risks to both wildlife and human health. There is an urgent need to comprehensively explore the multifaceted issue of microplastic pollution and understand microbial degradation to reduce environmental pollution caused by microplastics. This paper presents a comprehensive exploration of microplastics, including their types, composition, advantages, and disadvantages, as well as the journey and evolution of microplastic pollution. The impact of microplastics on the microbiome and microbial communities is elucidated, highlighting the intricate interactions between microplastics and microbial ecosystems. Furthermore, the microbial degradation of microplastics is discussed, including the identification, characterization, and culturing methods of microplastic-degrading microorganisms. Mechanisms of microplastic degradation and the involvement of microbial enzymes are elucidated to shed light on potential biotechnological applications. Strategies for reducing microplastic pollution are presented, encompassing policy recommendations and the importance of enhanced waste management practices. Finally, the paper addresses future challenges and prospects in the field, emphasizing the need for international collaboration, research advancements, and public engagement. Overall, this study underscores the urgent need for concerted efforts to mitigate microplastic pollution and offers valuable insights for researchers, policymakers, and stakeholders involved in environmental preservation.

Prepared microplastics interaction with Artemia salina under low pH conditions representing ocean acidification; a simulated environmental exposure

Ocean acidification and microplastic pollution are two of the major ecological concerns. The distribution of large quantities of plastic debris and microplastics all across the oceans emphasises the need to determine the influence of microplastics in ocean acidification and to evaluate its concomitant toxicological effects on aquatic life forms. Studies on the combined impact of both the stressors are very limited, but much needed in the current scenario. Where most of the present-day research use purchased microplastics of defined size and morphology (microspheres, fibres, rods, etc.), the present study employs prepared "true to life microplastics" that resemble the environmental microplastic pollutants in morphology and size heterogeneity. The present study focusses on evaluating the fate and impact of oceanic microplastics on the physiology and development of Artemia salina (Brine shrimp), one among the most ecologically significant zooplankton species. Natural sea water was acidified by controlled perturbation of carbon dioxide using a valve system. The hatching rate of A. salina cysts receded significantly (p < 0.05) upon singular exposures to microplastics and low pH (7.80), whereas combined effect was insignificant. The reactive oxygen species (ROS) elevated as a result of individual exposures to microplastics and low pH. However, only in 0.5 mg mL-1 PE treatments at pH 7.80, an additive impact was reported for ROS activity (p < 0.05). The SOD activities increased significantly but it can be attributed as the individual responses towards exposure to both the stressors. A significant additive impact was not observed for SOD activity (p > 0.05). But during the development, significant morphological anomalies were observed. Changes in the appendages of nauplii and juveniles as a result of combined exposure to microplastics and low pH treatments are significant findings. Our observations suggest that coupled exposure to microplastics and low pH could induce significant oxidative stress in the marine zooplanktons and also adversely affect their normal development. Findings from the current study emphasise the need for further research to understand the coupled toxicological impacts of ocean acidification and predominant pollutants such as microplastics to other marine animals as well.

Marine plastic pollution detection and identification by using remote sensing-meta analysis

The persistent plastic litter, originating from different sources and transported from rivers to oceans, has posed serious biological, ecological, and chemical effects on the marine ecosystem, and is considered a global issue. In the past decade, many studies have identified, monitored, and tracked marine plastic debris in coastal and open ocean areas using remote sensing technologies. Compared to traditional surveying methods, high-resolution (spatial and temporal) multispectral or hyperspectral remote sensing data have been substantially used to monitor floating marine macro litter (FMML). In this systematic review, we present an overview of remote sensing data and techniques for detecting FMML, as well as their challenges and opportunities. We reviewed the studies based on different sensors and platforms, spatial and spectral resolution, ground sampling data, plastic detection methods, and accuracy obtained in detecting marine litter. In addition, this study elaborates the usefulness of high-resolution remote sensing data in Visible (VIS), Near-infrared (NIR), and Short-Wave InfraRed (SWIR) range, along with spectral signatures of plastic, in-situ samples, and spectral indices for automatic detection of FMML. Moreover, the Thermal Infrared (TIR), Synthetic aperture radar (SAR), and Light Detection and Ranging (LiDAR) data were introduced and these were demonstrated that could be used as a supplement dataset for the identification and quantification of FMML.

Microplastics in marine invertebrates from the Red Sea Coast of Egypt: Abundance, composition, and risks

This study marked the first exploration of microplastics in marine invertebrates in the Red Sea Coast of Egypt. 110 individuals from 11 different species, including Bivalvia, Gastropoda, Echinoidea, and Holothuroidrea, were collected near a popular tourist destination. The average concentrations of microplastics varied among species, ranging from 8.2 to 136.5 items per individual or 0.2 to 18.1 items per gram of tissue wet weight, with 100 % occurrence. Bivalves had higher concentrations per gram of tissue compared to sediment dwellers and grazers, with Brachidontes pharaonis showing the highest levels. Actinopyga crassa, a sea cucumber, displayed the highest abundance per individual due to its large size and behavior. The identified plastic polymers suggested sources associated with tourism and maritime activities. The estimated human exposure to microplastics through bivalve consumption was minimal. Further research is needed to examine microplastics contamination in the Red Sea and its potential impacts on ecosystems and human well-being.

Fasting durations of Steller sea lion pups vary among subpopulations-evidence from two plasma metabolites

Geographic differences in population growth trends are well-documented in Steller sea lions (Eumetopias jubatus), a species of North Pacific pinniped listed under the U.S. Endangered Species Act in 1990 following a marked decline in population abundance that began during the 1970s. As population growth is intrinsically linked to pup production and survival, examining factors related to pup physiological condition provides useful information to management authorities regarding potential drivers of regional differences. During dam foraging trips, pups predictably transition among three fasting phases, distinguished by the changes in the predominant metabolic byproduct. We used standardized ranges of two plasma metabolites (blood urea nitrogen and β-hydroxybutyrate) to assign pups to fasting categories (n = 1528, 1990-2016, 12 subpopulations): Recently Fed-Phase I (digestion/assimilation-expected hepatic/muscle glycogen usage), Phase II (expected lipid utilization), transitioning between Phases II-III (expected lipid utilization with increased protein reliance), or Phase III (expected protein catabolism). As anticipated, the majority of pups were classified as Recently Fed-Phase I (overall mean proportion = 0.72) and few pups as Phase III (overall mean proportion = 0.04). By further comparing pups in Short (Recently Fed-Phase II) and Long (all other pups) duration fasts, we identified three subpopulations with significantly (P < 0.03) greater proportions of pups dependent upon endogenous sources of energy for extended periods, during a life stage of somatic growth and development: the 1) central (0.27 ± 0.09) and 2) western (0.36 ± 0.13) Aleutian Island (declining population trend) and 3) southern Southeast Alaska (0.32 ± 0.06; increasing population trend) subpopulations had greater Long fast proportions than the eastern Aleutian Islands (0.10 ± 0.05; stabilized population). Due to contrasting population growth trends among these highlighted subpopulations over the past 50+ years, both density-independent and density-dependent factors likely influence the dam foraging trip duration, contributing to longer fasting durations for pups at some rookeries.

Hydrophobic organic contaminants affiliated with polymer-specific microplastics in urban river tributaries and estuaries

Exposure to microplastics (MPs) and hydrophobic organic contaminants (HOCs) combined at high concentrations may induce adverse effects to aquatic organisms in laboratory-scale studies. To determine environmentally relevant concentrations of HOCs in MPs, it is essential to understand the occurrence of MP-affiliated HOCs in the aquatic environment. Here we report the occurrences of HOCs affiliated with polymer-specific floating MPs from 12 tributaries and three estuaries in the Pearl River Delta, South China. Target HOCs include nine synthetic musks (SMs), 14 ultraviolet adsorbents (UVAs), 15 polycyclic aromatic hydrocarbons (PAHs), eight polybrominated diphenyl ethers (PBDEs), and 14 polychlorinated biphenyls (PCBs). Average concentrations of MP-affiliated ∑9SM, ∑14UVA, ∑15PAH, ∑8PBDE, and ∑14PCB were 1790, 5550, 1090, 412, and 107 ng g-1, respectively. The average concentrations of HOCs affiliated with MPs of different polymer types were 9790, 7220, 72,500, and 55,800 ng g-1 for polyethylene (PE), polypropylene, polystyrene, and other MPs, respectively. As the concentration of PE was the highest among all MPs at the average concentration of 0.77 mg m-3, the monthly outflow of PE-affiliated HOCs accounted for the largest proportion (46 %) in the outflow of MP-affiliated HOCs (2.8 g) to the coastal ocean via three estuaries. These results suggest that HOCs were highly concentrated in MPs and varied among different chemicals and polymer types. Due to the differences of polymer characteristics and half-life of affiliated chemicals, future toxicology studies concerning exposure to these combined pollutants may need to specify polymer types and their affiliated chemicals.

Microplastics in Different Tissues of a Commonly Consumed Fish, Scomberomorus guttatus, from a Large Subtropical Estuary: Accumulation, Characterization, and Contamination Assessment

Microplastics (MPs) ingestion by fish signifies a worldwide threat to human health but limited research has examined their existence within the consumable portions (muscle) of fish. Thus, this study was undertaken to unveil the prevalence, characterization, and contamination extent of MPs across various body tissues, including the muscle of the king mackerel (S. guttatus) from the lower Meghna estuary in Bangladesh-a pioneering investigation in this region. In our analysis, we identified a total of 487 MPs, with an average abundance of 48.7 ± 20.3 MPs/individual. These MPs were distributed across different tissues, with respective concentrations of 0.84 ± 0.45 items/g in the digestive tract, 2.56 ± 0.73 items/g in the gills, and 0.3 ± 1.72 items/g in the muscle tissue. The observed variations among these tissue types were statistically significant (p < 0.05). Moreover, a significant positive correlation indicated that fish with higher weight had higher MPs in their gills and DT (digestive tract). The majority were <0.5 mm in size (97.74%) and exhibited a fiber-like shape (97.74%), with a notable prevalence of transparent (25.87%) and a pink coloration (27.92%). Remarkably, the majority of MPs were discovered within the size range of <0.5-1 mm (100%), particularly in the muscle tissue, signifying a substantial transfer of MPs into the human diet. Besides, we discovered only three polymer types of microplastics which could be attributed to the extensive use of food packaging, plastic containers, wrapping plastics, residential garbage, and plastic pipes that end up in the aquatic environment via river discharges. The contamination factor (CF) values of fish muscle (5.75) and the digestive tract (5.50) indicated that these fish organs were considerably contaminated (3 < CF < 6) with MPs. The pollution index of MPs (PLI > 1) indicated a high contamination level for MPs pollution of S. guttatus in the lower Meghna River estuary.

Microplastic pollution and regulating factors in the surface sediment of the Xuande Atolls in the South China Sea

Microplastics are widely present in the marine environment, but their pollution and potential risk assessment in the seabed sediments have not been well addressed in remote sea areas. In this study, microplastics in 50 surface sediment samples from the Xuande Atolls at the Xisha of the South China Sea were studied. There were 20 samples with detectable microplastics of 5-20 items kg-1. They were all fibers in shapes and blue/transparent in colors with the dominant chemical component of polyester and the typical size of 0.02-3 mm. We found a large spatial variability of microplastic abundance in the surface sediment with generally low or undetectable levels in the lagoon deposits and the offshore deep-sea sediments but elevated abundances in the slope sediments of the Xuande Atolls. Correlation analyses suggested that microplastic variability in the Xisha sediment was less affected by local environmental parameters such as water depth, sediment particle size, organic carbon content, and sediment types. We also found that elevated microplastics in the seabed sediments on various sides of the Xuande Atolls could be related to the seasonal change in monsoon-driven currents. Finally, a low risk of microplastic pollution in the surface sediment of the Xisha is concluded based on the assessments of the polymer hazard index and the pollution load index. These findings provide not only a baseline understanding of microplastics but also their dynamics in the surface sediment of the remote Xisha area of the South China Sea.

Sorption behaviour of tebuconazole on microplastics: kinetics, isotherms and influencing factors

Microplastics (MPs) and pesticides are two classes of environmental pollutants and have become global challenges. MPs could adsorb substantial environmental pollutants, which may affect their transportation, distribution and cause combination toxicity. Therefore, the study of sorption properties and mechanisms is the basis of the ecological risk assessment of co-exposure of pesticides and MPs. In this research, typical triazole fungicide tebuconazole (TEB) is selected as a model pollutant, and its sorption behaviour was investigated by kinetic and isotherm models. Meanwhile, a series of environmental influencing factors, like pH, salinity, and metals were conducted. Results showed that the sorption of TEB on MPs could reach equilibrium at 24 h, and the sorption capacity followed the order of PA (polyamide) > PS (polystyrene) > PP (polypropylene). The pseudo-second-order model was the most appropriate model to describe kinetic data, and the Freundlich model was well fit for PA sorption isotherms, in contrast the Langmuir model is better for PP and PS. Additionally, the pH of the solution, salinity, and metals have an important effect on sorption. Combined with Fourier Transform Infrared Spectroscopy and environmental influencing factors, the sorption mechanisms were mainly electrostatic interaction and hydrogen bond for PA and PP, and hydrophobic force, intermolecular force, and electrostatic force for PS, respectively.

Detection and quantification of microplastic pollution in the endangered Galapagos sea lion

Marine debris pollution poses a significant global threat to biodiversity, with plastics being the primary debris type found in oceans due to their low-cost production and high demand worldwide. Microplastics (MPs, <5 mm in size) are highly bioavailable to a wide range of marine taxa, including marine mammals, through direct and indirect ingestion routes (i.e., trophic transfer). Recently, MP pollution has been detected on the Galapagos Marine Reserve, so in this study we developed a baseline framework for MP pollution in the Galapagos sea lion (GSL, Zalophus wollebaeki) through scat-based analysis. We collected 180 GSL scat samples from the southeast region following strict quality assurance/quality control protocols to detect, quantify and characterize physical-chemical properties of MPs through visual observations and μFT-IR spectroscopy. We recovered 81 MPs of varying sizes and colors in 37 % of samples (n = 66/180), consisting mostly of fibers (69 %, x¯ = 0.31 ± 0.57 particles scat-1). The number of particles per gram of sample wet weight ranged from 0.02 to 0.22 (x¯ = 0.04 ± 0.05 particles scat wet g-1). El Malecón and Punta Pitt rookeries at San Cristobal Island had the highest number of MPs (x¯ = 0.67 ± 0.51 and 0.43 ± 0.41 particles scat-1, respectively), and blue-colored particles were the most common in all samples. We identified eleven polymers in 46 particles, consisting mostly of polypropylene-polyethylene copolymer, polypropylene, cellulose, polyethylene, and polyvinyl chloride. The textile, fishing, and packaging industries are likely significant sources of microfibers into this insular ecosystem. Our results suggest that the GSL is exposed to MPs due to anthropogenic contamination that is subsequently transferred through trophic processes. These findings provide an important baseline framework and insights for future research on MP pollution in the region, as well as for management actions that will contribute to the long-term conservation of the GSL.

Spatio-temporal distribution of microplastic pollution in surface sediments along the coastal areas of Istanbul, Turkey

Microplastics (MPs) have become prevalent in various environmental compartments, including air, water, and soil, attracting attention as significant pollutant parameters. This study investigated the prevalence of MP pollution in surface sediments along Istanbul's Marmara Sea, encompassing the megacity and the Bosphorus. A comprehensive sampling approach was employed, covering 43 stations across four seasons and depths ranging from 5 to 70 m. The objective was to assess the impact of terrestrial, social, and industrial activities on MPs. The average concentrations varied per season, with fall, winter, spring, and summer values recorded as 2000 ± 4100, 1600 ± 3900, 4300 ± 12,000, and 9500 ± 20,300 particles/kg-DW. The study identified river stations in the Golden Horn and sea discharge locations as hotspots for high concentrations. Notably, the dominant shape shifted from fibers in fall, winter, and spring to fragments during summer, coinciding with mucilage occurrences. The study identified 11 different polymers, with polyethylene (44 %) and polypropylene (31 %) being the most common.

A first assessment of microplastic contamination in the snow of Ankara, Turkey

Microplastics (MPs), affecting aquatic and terrestrial ecosystems, have spread globally. The atmosphere is known as a pollutant acceptor and carrier among other ecosystems. However, the fate and amount of microplastics in the atmosphere have been the subject of less research. Therefore, it is quite important to study the amount and properties of microplastics in atmospheric fallout. The main purpose of this article is to discover microplastics in fresh snow samples collected in three different regions of Ankara and to identify potential sources of supply. The morphologies and compositions of microplastics were analyzed and characterized using scanning electron microscopy (SEM/EDS). μ-Raman spectroscopy was used to reveal the various polymer types of the selected samples. As a result, microplastics were found in all snow samples. Among the nine snow samples examined, 537 particles were recognized as MPs. The average abundance of MPs in snow samples was 59.66 items L-1. Fibers, fragments, films, and circular forms were found in all snow samples. Fragments predominated for all samples (50.08%), followed by films (28.54%), fibers (16.86%), and circulars (4.50%). The proportion of small plastics was quite high when compared to the large plastics captured by snow. Smaller MP particles found in the snow had more variety, suggesting that the microplastics in the snow samples have been broken down by long-range transport and deposition. Six different polymer types were discovered in the snow samples in this study. The most frequently identified polymer was polyethylene (31%), succedded by polystyrene (28%), and polypropylene (21%). Polyethylene terephthalate (12%), polyvinyl chloride (5%), and nylon were present in smaller proportions.

Occurrence and accumulation of microplastics in commercial fish in the coastal waters of the Lvsi fishing ground in China

In recent years, there has been an exponential increase in the research popularity of microplastics (MPs) in offshore marine environments. However, there is still a gap in the research on the accumulation of MPs in different tissues of aquatic organisms and the trophic transfer of MPs between aquatic organisms. The common occurrence of MPs in the gills and guts of 11 species of commercial fishes was examined in the coastal waters of the Lvsi fishing ground (LSFG). The obtained results showed that >85 % of MPs existed in the gills and guts of these fish, and the abundance was 2.39 ± 1.38 pieces/fish and 2.56 ± 1.42 pieces/fish, respectively. Fibrous and blue are the most common colors and shapes of MPs, and PET is the main polymer type. At the species level, the abundance of MPs in the gills and guts of a few fishes (e.g., Larimichthys polyactis, Setipinna tenuifilis, Collichthys lucidus) decreased with increasing body length and body weight (P < 0.05). At the community level, this situation was not significant (P > 0.05). With increasing trophic level (TL), MPs tended to decrease in the gills (trophic magnification factor, TMF = 0.86) but did not significantly vary in the gut. We believe that MPs are multidimensional pollutants, and their accumulation in tissues/organs of organisms has not been accurately and qualitatively determined. To establish the relationship of MP transport and trophic transfer among water, sediments and organisms, we suggest that more efforts should be made to investigate MPs in aquatic organisms in the coastal waters of LSFG and to increase the examination of MPs in the water column and sediments. This study will help us improve our understanding of MPs pollution, and provide a good reference and basis for the management, monitoring and implementation of pollutants in marine organism of coastal water.

Higher ecological risks and lower bioremediation potentials identified for emerging OPEs than legacy PCBs in the Beibu Gulf, China

The production and use of organophosphate esters (OPEs) as substitutes for traditional halogenated flame retardants is increasing, resulting in greater global concern related to their ecological risks to marine environments. In this study, polychlorinated biphenyls (PCBs) and OPEs, representing traditional halogenated and emerging flame retardants, respectively, were studied in multiple environmental matrices in the Beibu Gulf, a typical semi-closed bay in the South China Sea. We investigated the differences in PCB and OPE distributions, sources, risks, and bioremediation potentials. Overall, the concentrations of emerging OPEs were much higher than those of PCBs in both seawater and sediment samples. Sediment samples from the inner bay and bay mouth areas (L sites) accumulated more PCBs, with penta- and hexa-CBs as major homologs. Chlorinated OPEs were prevalent in both seawater and sediment samples from the L sites, whereas tri-phenyl phosphate (TPHP) and tri-n-butyl phosphate (TNBP) were predominant at the outer bay (B sites) sediment samples. Source identification via principal component analysis, land use regression statistics, and δ13C analysis indicate that PCBs were mainly sourced from the atmospheric deposition of sugarcane and waste incineration, whereas sewage inputs, aquaculture, and shipping activity were identified as sources of OPE pollution in the Beibu Gulf. A half-year sediment anaerobic culturing experiment was performed for PCBs and OPEs, and the results only exhibited satisfactory dechlorination for PCBs. However, compared with the low ecological risks of PCBs to marine organisms, OPEs (particularly trichloroethyl phosphate (TCEP) and TPHP) exhibited low to medium threats to algae and crustaceans at most sites. Given their increasing usage, high ecological risks, and low bioremediation potential in enrichment cultures, pollution by emerging OPEs warrants close attention.

Recent advances on microplastics pollution and removal from wastewater systems: A critical review

Microplastics (MPs) (plastic particles <5 mm) are globally acknowledged as a serious emerging micropollutant, which passes through various pathways in natural habitats and eventually ends up in our food chain. In this context, the present study critically reviews recent advances in MPs sampling and detection, occurrence, fate, and removal in wastewater treatment plants (WWTPs) by delineating their characteristics that manifest toxicity in the environment via effluent discharge. While there is currently no standard protocol in place, this work examined and compared the latest approaches adopted for improved sampling, sample processing, and characterization of MPs via fluorescence imaging and certified reference materials for method validation. MPs concentration from different sources in the WWTPs varies considerably ranging between 0.28 and 18285 MPs/L (raw wastewater), 0.004-750 MPs/L (effluent), and 0.00023-10380 MPs/kg (sludge). Assessment of MPs removal efficiency across different treatment stages in various in WWTPs has been performed and elucidated their removal mechanisms. The overall MPs removal efficiency in primary, secondary, and tertiary treatment stages in WWTPs reported to be around 57-99%, 78.1-99.4%, and 90-99.2%, respectively. Moreover, the review covers advanced treatment methods for removing MPs, including membrane bioreactors, coagulation/flocculation, ultrafiltration, rapid sand filtration, ozonation, disc filtration, and reverse osmosis, which have been found to be highly effective (>99%). Membrane bioreactors have been proclaimed to be the most reliable secondary treatment technique for MPs removal. Coagulation (92.2-95.7%) followed by ozonation (99.2%) as a tertiary treatment chain has been demonstrated to be the most efficient in removing MPs from secondary-treated wastewater effluent. Further, the review delineates the effect of different treatment stages on the physical and chemical characteristics of MPs, associated toxicity, and potential impact factors that can influence the MPs removal efficiency in WWTPs. Conclusively, the merits and demerits of advanced treatment techniques to mitigate MPs pollution from the wastewater system, research gaps, and future perspectives have been highlighted.

Microplastics in the marine environment of St. Mary's Island: implications for human health and conservation

Microplastics have now been identified as a class of emerging pollutants and is considered as a threat to aquatic organisms. This baseline paper investigated the distribution, composition, and potential ecological risks of microplastic (MP) pollution on St. Mary's Island, revealing an average abundance of 0.218 particles/L in water samples. Blue fibres and white foams were the primary MPs identified, and fishing activities and packaging were the main sources of pollution. Six types of polymers were identified: low-density polyethylene (LDPE), polystyrene (PS), polyamide (PA), polypropylene (PP), polyethylene (PE), and high-density polyethylene (HDPE). The Polymer Hazard Index (PHI) and Potential Ecological Risk Index (PERI) indicated a medium environmental risk for the island. Additionally, it was discovered that MPs' surfaces contained dangerous substances that could endanger aquatic life. The research emphasizes the significance of implementing measures such as responsible disposal, management, elimination, regulatory policies, and local administration techniques to mitigate the impact of MP pollution on the island's shores and marine biota. This research provides a baseline for monitoring MP contamination and underscores the need for continuous investigation to assess their impacts on marine life.

Chlorinated pesticides and PCB residues in the Egyptian Western Desert oases sediments

This preliminary investigation aimed to detect concentrations of chlorinated pesticides and PCBs in 40 sediment samples from three desert oases located in Kharga, Dakhla and Farafra in western Egypt. The residues of 18 PCBs and 16 chlorinated pesticides were measured by GC-MS/MS (SRM) method. The results showed that PCBs and pesticides were present in all studied samples. The concentrations of individual PCBs ranged from undetected to 3.99 ng/g dw in all these sediment samples. The total residue of pesticides (ng/g, dry weight) in sediment samples also varied from 5.18 to 25.92, 5.41 to 29.49, and 5.93 to 24.19 ng/g dw for the Kharga, Dakhla and Farafra Oases, respectively. The concentrations of PCBs and chlorinated pesticides detected in these oasis sediments were lower than that reported for other worldwide locations. According to the recorded concentrations in this baseline study of PCBs and total DDTs, the results revealed the minimal risks to organisms and people in the studied area according to the Effects Range-Low (ERL) and Effects Range-Median (ERM) guideline values.

Co-transport of arsenic and micro/nano-plastics in saturated soil

Contaminants can co-exist and migrate together in the environment, causing complex (and sometimes unexpected) transport dynamics which challenge the efficient remediation of individual contaminants. The co-transport dynamics, however, remained obscure for some contaminants, such as arsenic and micro/nano-plastics (MNPs). To fill this knowledge gap, this study explored the co-transport dynamics of arsenic and MNP particles in saturated soil by combining laboratory experiments and stochastic model analysis. Isothermal adsorption and sand column transport experiments showed that the adsorption of arsenic by MNP particles followed the Freundlich model, with a maximum adsorption of 2.425 mg/g for the MNP particles with a diameter of 100 nm. In the presence of MNP particles, the efflux concentration of arsenic ions declined due to adsorption, where the decline rate decreased with the increasing MNP size and increased with the increasing adsorption capacity. Experimental results also showed that the 100 nm nano-plastic particles prohibited arsenic transport in saturated sand columns, while the 5 μm microplastics enhanced arsenic transport due to electrostatic adsorption and media pore plugging. A tempered time fractional advective-dispersion equation was then proposed to quantify the observed breakthrough curves of arsenic. The results showed that this model can reliably capture the co-transport behavior of arsenic with MNPs in the saturated soil with all coefficients of determination over 0.97, and particularly, the small MNP particles facilitated anomalous transport of arsenic. This study therefore improved the understanding and quantification of the co-transport of arsenic and MNPs in soil.

Distribution and characteristics of microplastics in sediment at representative dredged material ocean dumping sites, China

Dredged material ocean dumping activities are likely an important source of microplastics (MPs) in coastal areas but have received little attention globally. In this study, we investigated the spatiotemporal distribution and characteristics of MPs in sediments at eight dredged material dumping sites of China. MPs were separated from sediment through density flotation, and polymer types were identified using μ-FTIR. The results showed that the average MP abundance was 112.82 ± 109.68 items/kg d.w. The MPs were more abundant at nearshore dumping sites than at distant dumping sites. Dumping activities may be the main contributor of MPs to Site BD1, the farthest dumping site from shore, but only a minor source of MPs at the other dumping sites. The characteristics of MPs were dominated by transparent PET fibers <1 mm. Overall, sediments at the dumping sites exhibited relatively low to moderate concentrations of MPs in comparison to most other coastal sediments.

Stressors of emerging concern in deep-sea environments: microplastics, pharmaceuticals, personal care products and deep-sea mining

Although most deep-sea areas are remote in comparison to coastal zones, a growing body of literature indicates that many sensitive ecosystems could be under increased stress from anthropogenic sources. Among the multiple potential stressors, microplastics (MPs), pharmaceuticals and personal care products (PPCPs/PCPs) and the imminent start of commercial deep-sea mining have received increased attention. Here we review recent literature on these emerging stressors in deep-sea environments and discuss cumulative effects with climate change associated variables. Importantly, MPs and PPCPs have been detected in deep-sea waters, organisms and sediments, in some locations in comparable levels to coastal areas. The Atlantic Ocean and the Mediterranean Sea are the most studied areas and where higher levels of MPs and PPCPs have been detected. The paucity of data for most other deep-sea ecosystems indicates that many more locations are likely to be contaminated by these emerging stressors, but the absence of studies hampers a better assessment of the potential risk. The main knowledge gaps in the field are identified and discussed, and future research priorities are highlighted to improve hazard and risk assessment.

Recent trends on microplastics abundance and risk assessment in coastal Antarctica: Regional meta-analysis

We investigated sources, abundance and risk of microplastics (MPs) in water, sediments and biota around Antarctica. The concentration of MPs in Southern Ocean (SO) ranged from 0 to 0.56 items/m³ (mean = 0.01 items/m³) and 0-1.96 items/m³ (mean = 0.13 items/m³) in surface and sub-surface water. The distribution of fibers in water was 50%, sediments were 61%, and biota had 43%, which were followed by fragments in the water (42%), sediments (26%), and biota (28%). Shapes of film had lowest concentrations in water (2%), sediments 13%), and biota (3%). Ship traffic, drift of MPs by currents, and untreated waste water discharge contributed to the variety of MPs. The degree of pollution in all matrices was evaluated using the pollution load index (PLI), polymer hazard index (PHI), and potential ecological risk index (PERI). PLI at about 90.3% of locations were at category I followed by 5.9% at category II, 1.6% at category III, and 2.2% at category IV. Average PLI for water (3.14), sediments (6.6), and biota (2.72) had low pollution load (<10). Mean PHI for water, sediments, and biota showed hazards level V with a higher percentage of 84.6% (>1000) and 63.9% (PHI:0-1) in sediments and water, respectively. PERI for water showed 63.9% minor risk, and 36.1% extreme risk. Around 84.6% of sediments were at extreme risk, 7.7% faced minor risk, and 7.7% were at high risk. While 20% of marine organisms living in cold environments experienced minor risk, 20% were in high risk, and 60% were in extreme risk. Highest PERI was found in the water, sediments, and biota in Ross Sea, due to high hazardous polymer composition of polyvinylchloride (PVC) in the water and sediments due to human activity, particularly use of personnel care products and waste water discharge from research stations.

Microplastics pollution in mud crab (Scylla sp.) aquaculture system: First investigation and evidence

Microplastics (MPs) occurrence in farmed aquatic organisms has already been the prime priority of researchers due to the food security concerns for human consumption. A number of commercially important aquaculture systems have already been investigated for MPs pollution but the mud crab (Scylla sp.) aquaculture system has not been investigated yet even though it is a highly demanded commercial species globally. This study reported the MPs pollution in the mud crab (Scylla sp.) aquaculture system for the first time. Three different stations of the selected aquafarm were sampled for water and sediment samples and MPs particles in the samples were isolated by the gravimetric analysis (0.9% w/v NaCl solution). MP abundance was visualized under a microscope along with their size, shape, and color. A subset of the isolated MPs was analyzed by scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR) for the surface and chemical characterization respectively. The average MPs concentration was 47.5 ± 11.875 particles/g in sediment and 127.92 ± 14.99 particles/100 L in the water sample. Fibrous-shaped (72.17%) and transparent-colored (59.37%) MPs were dominant in all the collected samples. However, smaller MPs (>0.05-0.5 mm) were more common in the water samples (47.69%) and the larger (>1-5 mm) MPs were in the sediment samples (47.83%). SEM analysis found cracks and roughness on the surface of the MPs and nylon, polyethylene, polypropylene, and polystyrene MPs were identified by FTIR analysis. PLI value showed hazard level I in water and level II in sediment. The existence of deleterious MPs particles in the mud crab aquaculture system was well evident. The other commercial mud crab aquafarms must therefore be thoroughly investigated in order to include farmed mud crabs as an environmentally vulnerable food security concern.

New insights into the migration, distribution and accumulation of micro-plastic in marine environment: A critical mechanism review

Microplastics (MPs) are widely distributed in the marine environment, posing a significant threat to marine biota. The contribution of anthropogenic and terrestrial sources to the aquatic ecosystem has led to an increase in MPs findings, and their abundance in aquatic biota has been reported to be of concern. MPs are formed mainly via photo degradation of macroplastics (large plastic debris), and their release into the environment is a result of the degradation of additives. Eco-toxicological risks are increasing for marine organisms, due to the ingestion of MPs, which cause damage to gastrointestinal (GI) tracts and stomach. Plastics with a size <5 mm are considered MPs, and they are commonly identified by Raman spectroscopy, Fourier transfer infrared (FTIR) spectroscopy, and Laser direct infrared (LDIR). The size, density and additives are the main factors influencing the abundance and bioavailability of MPs. The most abundant type of MPs found in fishes are fiber, polystyrenes, and fragments. These microscale pellets cause physiological stress and growth deformities by targeting the GI tracts of fishes and other biota. Approximately 80% MPs come from terrestrial sources, either primary, generated during different products such as skin care products, tires production and the use of MPs as carrier for pharmaceutical products, or secondary plastics, disposed of near coastal areas and water bodies. The issue of MPs and their potential effects on the marine ecosystem require proper attention. Therefore, this study conducted an extensive literature review on assessing MPs levels in fishes, sediments, seawater, their sources, and effects on marine biota (especially on fishes), chemo-physical behavior and the techniques used for their identification.

Revealing the response of microbial communities to polyethylene micro(nano)plastics exposure in cold seep sediment

To date, multiple studies have shown that the accumulation of microplastics (MPs)/nanoplastics (NPs) in the environment may lead to various problems. However, the effects of MPs/NPs on microbial communities and biogeochemical processes, particularly methane metabolism in cold seep sediments, have not been well elucidated. In this study, an indoor microcosm experiment for a period of 120 days exposure of MPs/NPs was conducted. The results showed that MPs/NPs addition did not significantly influence bacterial and archaeal richness in comparison with the control (p > 0.05), whereas higher levels of NPs (1 %, w/w) had a significant adverse effect on bacterial diversity (p < 0.05). Moreover, the bacterial community was more sensitive to the addition of MPs/NPs than the archaea, and Epsilonbacteraeota replaced Proteobacteria as the dominant phylum in the MPs/NPs treatments (except 0.2 % NPs). With respect to the co-occurrence relationships, network analysis showed that the presence of NPs, in comparison with MPs, reduced microbial network complexity. Finally, the presence of MPs/NPs decreased the abundance of mcrA, while promoting the abundance of pmoA. This study will help elucidate the responses of microbial communities to MPs/NPs and evaluate their effects on methane metabolism in cold seep ecosystems.

Microplastic sink that cannot be ignored in chemosynthetic organisms

Marine microplastic (MP) pollution is a widespread concern; however, to date, MP pollution in chemoautotrophic ecosystems remains largely unknown. This study focuses on the cold seep in the South China Sea. Two dominant species, namely mussel (Gigantidas platifrons) and squat lobster (Shinkaia crosnieri), were collected for examining the MP pollution. MPs were present in both mussels and squat lobsters with abundances of 0.13 ± 0.04 and 0.17 ± 0.06 items/ind., respectively. MPs were mainly fibrous (62.5 %) and transparent (45.8 %). The main polymer type was polyester (54.2 %). About 86.5 MPs/m² were found inhabiting mussels and squat lobsters-a value comparable to those reported in benthos. This pilot report on MP pollution in cold-seep species provides key information for studies on MP pollution in chemoautotrophic ecosystems and evidence regarding a potential biological MP sink. The role of cold-seep organisms in MP retention and transport in the regional sea merits further attention.

Methods for controlled preparation and dosing of microplastic fragments in bioassays

Microplastic fragments (microfragments) are among the most abundant microplastic shapes found in marine ecosystems throughout the world. Due to their limited commercial availability, microfragments are rarely used in laboratory experiments. Here a novel method of microfragment production has been developed and validated. Polyethylene and polypropylene plastic stock (2 and 3 mm thick respectively) was ground using a cryomill, washed, and rinsed through a stack of sieves. Microfragments were prepared at three distinct size classes (53-150, 150-300, 300-1000 μm) and were confirmed to be accurate and consistent in size. Employing a novel ice cap dosing technique, microfragments were accurately dosed into experimental vials while excluding headspace, facilitating particle suspension without the aid of chemical surfactants. A proof of principle ingestion experiment confirmed the bioavailability of 53-150 μm polyethylene microfragments to brine shrimp Artemia sp. Together, these methods provide a controlled way to produce and dose microplastic fragments for experimental and analytical research.

A global snapshot of microplastic contamination in sediments and biota of marine protected areas

Microplastics (MPs) become ubiquitous contaminants in Marine Protected Areas (MPA) that have been planned as a conservation strategy. The present study provides a comprehensive overview of the occurrence, abundance, and distribution of MPs potentially affecting MPA worldwide. Data on MP occurrence and levels in sediment and biota samples were collected from recent peer-reviewed literature and screened using a GIS-based approach overlapping MP records with MPA boundaries. MPs were found in 186 MPAs, with levels ranging from 0 to 9187.5 items/kg in sediment and up to 17,461.9 items/kg in organisms. Peaked MPs concentrations occurred within multiple-use areas, and no-take MPAs were also affected. About half of MP levels found within MPA fell into the higher concentration quartiles, suggesting potential impacts on these areas. In general, benthic species were likely more affected than pelagic ones due to the higher concentrations of MP reported in the tissues of benthic species. Alarmingly, MPs were found in tissues of two threatened species on the IUCN Red List. The findings denote urgent concerns about the effectiveness of the global system of protected areas and their proposed conservation goals.