Comparison of 17β-estradiol adsorption on soil organic components and soil remediation agent-biochar

Transport of prednisolone, cortisone, and triamcinolone acetonide in agricultural soils: Sorption isotherms, transport dynamics, and field-scale simulation

The occurrence of glucocorticoids (GCs) in agricultural soils has raised concerns due to their high polarity, widespread biological effects in vertebrates, and their potential to disrupt vital processes such as glucose metabolism and immune function. This study investigated the sorption and transport dynamics of three GCs, namely cortisone (COR), prednisolone (PNL), and triamcinolone acetonide (TCA) in five soil-water systems (S1-S5 systems). The sorption data of the GCs were fitted to a linear sorption model (R2 = 0.95-0.99), with organic carbon (OC) normalized sorption coefficients ranging from 2.26 ± 0.02 to 3.36 ± 0.02. The sorption magnitudes (Kd) of the GCs exhibited a nearly linear correlation with their corresponding octanol-water partition coefficients (logKow) in the S1-S3 systems. However, some deviations from linearity were observed in the S4 and S5 systems. Furthermore, a strong correlation was observed between the Kd values of the GCs and the OC% of the soils. These data indicated that specific and hydrophobic partitioning interactions governed the sorption of GCs onto soils. The transport data of the GCs were fitted to a two-site nonequilibrium model using the CXTFIT program (R2 = 0.82-0.98). The retardation factor (R) for each GC exhibited a positive correlation with the OC% and clay contents of soils. Additionally, the relationships between the logR values and logKow values of the GCs deviated slightly from linear correlation in most columns. These results indicated that specific interactions in the columns were more pronounced compared to the batch systems. An initial field-scale simulation demonstrated that frequent precipitation can facilitate the dilution and vertical transport of the GCs through soil profiles. The transport potential of the GCs was affected by the properties and soils and GCs. Overall, these findings provide valuable insights into the transport potential and associated environmental risks of GCs in soil-water systems.

Efficient removal of endocrine disrupting compounds 17 α-ethynyl estradiol and 17 β-estradiol by Enterobacter sp. strain BHUBP7 and elucidation of the degradation pathway by HRAMS analysis

Owing to the increased population and their overuse, estrogens are being detected in the environment at alarming levels. They act as endocrine disrupting compounds (EDC's) posing adverse effects on animals and humans. In this study, a strain belonging to Enterobacter sp. strain BHUBP7 was recovered from a Sewage Treatment Plant (STP) situated in Varanasi city, U.P., India, and was capable of metabolizing both 17 α-Ethynylestradiol (EE2) and 17 β-Estradiol (E2) separately as a sole carbon source. The strain BHUBP7 exhibited high rates of E2 degradation as compared to EE2 degradation. The degradation of E2 (10 mg/L) was 94.3% after four days of incubation, whereas the degradation of EE2 (10 mg/L) under similar conditions was 98% after seven days of incubation. The kinetics of EE2 and E2 degradation fitted well with the first-order reaction rate. FTIR analysis revealed the involvement of functional groups like C = O, C-C, C-OH during the degradation process. The metabolites generated during degradation of EE2 and E2 were identified using HRAMS and a plausible pathway was elucidated. It was observed that metabolism of both E2 and EE2 proceeded with the formation of estrone, which was then hydroxylated to 4-hydroxy estrone, followed by ring opening at the C4-C5 position, and was further metabolized by the 4,5 seco pathway leading to the formation of 3-(7a-methyl-1,5-dioxooctahydro-1H-inden-4-yl) propanoic acid (HIP). It is the first report on the complete pathway of EE2 and E2 degradation in Enterobacter sp. strain BHUBP7. Moreover, the formation of Reactive Oxygen Species (ROS) during the degradation of EE2 and E2 was observed. It was concluded that both hormones elicited the generation of oxidative stress in the bacterium during the degradation process.

Insight into atrazine removal by fallen leaf biochar prepared at different pyrolysis temperatures: Batch experiments, column adsorption and DFT calculations

The environmental pollution caused by atrazine in the agricultural production cannot be ignored. In this study, the fallen leaf biochar (LBC) was prepared at three different temperatures (500 °C, 600 °C, and 700 °C) using a simple pyrolysis method (500 LBC, 600 LBC, and 700 LBC) for atrazine adsorption. Batch experiments showed that the performance of LBC in atrazine adsorption improved with rising pyrolysis temperature, and the highest adsorption amount of 700 LBC reached 84.32 mg g^-1. Kinetic and isotherm models showed that the adsorption behaviors were both monolayer and multilayer chemisorption. The findings of the characterizations (Elemental analysis, BET, XRD, Raman, FT-IR, and XPS) confirmed that the degree of aromatization determined the adsorption capacity of LBC to atrazine, and π-π electron donor-acceptor interaction was the main adsorption mechanism. Density functional theory (DFT) calculations showed that the highly aromatized biochar was more effective for atrazine adsorption, manifested as smaller molecular distances, higher adsorption energies, more stable complex structures, and stronger π-electron conjugation. In the column adsorption experiments, reducing the inlet flow rate or increasing the bed height extended the breakthrough time and exhaustion time of the breakthrough curves, and 700 LBC still showed good adsorption performance after five cycles. Overall, fallen leaf biochar as a reuse product of resource showed good potential for application in atrazine adsorption, which can be used for atrazine-contaminated water remediation.

Preparation and Adsorption Properties of Magnetic Molecularly Imprinted Polymers for Selective Recognition of 17β-Estradiol

In this paper, magnetic molecularly imprinted polymers (MMIPs) were fabricated on the surface of Fe3O4 by surface molecular imprinting technology, which can selectively adsorb 17β-estradiol (E2). The optimized experiments demonstrated that MMIPs possessed the best adsorption capacity when methanol was used as the solvent and MAA was used as the crosslinking agent, with a molar ratio of E2: MMA: EGDMA as 1:4:50. SEM, FTIR, and XRD were employed to investigate the morphologies of MMIPs and the results demonstrated that the MMIPs that can selectively adsorb E2 were successfully prepared on Fe3O4 particles. The adsorption experiments showed that 92.1% of E2 was adsorbed by the MMIPs, which is higher than the magnetic non-molecularly imprinted polymers (MNIPs). The Freundlich isotherm model was more suitable to describe the adsorption process of E2 by MMIPs. Meanwhile, MMIPs had a better recognition ability for E2 and its structural analogs such as estrone and estriol. The MMIPs still had good adsorption performance after methanol regeneration five times. The prepared MMIPs had the advantages of efficient adsorption ability and high reusability, so they can be applied for selective recognition and removal of E2.

Comparison of 17β-Estradiol Adsorption on Corn Straw- and Dewatered Sludge-Biochar in Aqueous Solutions

Removal of steroid hormones from aqueous environment is of prevailing concern because of their adverse impact on organisms. Using biochar derived from biomass as adsorbent to remove pollutants has become more popular due to its low cost, effectiveness, and sustainability. This study evaluated the feasibility of applying corn straw biochar (CSB) and dewatered sludge biochar (DSB) to reduce 17β-estradiol (E2) from aquatic solutions by adsorption. The experimental results showed that the adsorption kinetics and isotherm behavior of E2 on the two biochars were well described by the pseudo-second-order (R2 > 0.93) and Langmuir models (R2 > 0.97). CSB has higher E2 adsorption capacity than DSB, and the maximum adsorption capacity was 99.8 mg/g obtained from Langmuir model at 298 K, which can be attributed to the higher surface area, porosity, and hydrophobicity of this adsorbent. Higher pH levels (>10.2) decreased the adsorption capacities of biochar for E2, while the ionic strength did not significantly affect the adsorption process. The regeneration ability of CSB was slightly better than that of DSB. The possible adsorption mechanism for E2 on biochar is suggested as π−π interactions, H−bonding, and micropores filling. These results indicated that CSB has more potential and application value than DSB on reducing E2 from aqueous solutions when considering economy and removal performance.

Facile fabrication and characterization of kenaf core as natural biochar for the highly efficient removal of selected endocrine-disrupting compounds

This study aims to formulate and fabricate the optimum condition of modified kenaf core (MKC) for the removal of targeted endocrine-disrupting compounds in a batch adsorption system. Kenaf core was chemically modified using phosphoric acid as an activating agent, which involved the pyrolysis step. Results indicated a significant difference (p < 0.05) for unmodified and novel modified biochar, observed in characteristic performance analysis via ultimate analysis, Field Emission Scanning Electron Microscopy (FESEM), Fourier Transform Infrared Spectroscopy (FTIR) spectrum, and Brunauer-Emmett-teller (BET) surface area. The removal percentage of 17β-estradiol (E2) and 17α-ethinylestradiol (EE2) in individual and binary mixture systems was examined in order to ascertain the highest removal percentage for MKC application in an aqueous solution. The main and interaction effects of three prepared variables such as incorporate of impregnation concentration of an acid catalyst (0.1-1.0 M), particle size (45-1,000 µm), and dosage (1.0-20.0 g/L) were examined and statistically analyzed via design of experiment (DoE) through developed quadratic models. The removal efficiency of E2 and EE2 in an individual system leads to T₂KC > T₁KC > T₃KC, whereas that in the binary mixture system leads to T₂KC > T₁KC > T₃KC and T₁KC > T₂KC > T₃KC for E2 and EE2 adsorption, respectively, through hydrogen bonding and the π-π interaction mechanism. Thus, the findings revealed T₂KC at a moderate level of acid concentration (0.5 M H₃PO₄) to be a potential biochar, with an environmentally safe and sound profile for opposing emerging pollutant issues as well as for the attainment of sustainable development goals.

Influence of microplastics occurrence on the adsorption of 17β-estradiol in soil

High levels of steroid estrogens are continuously detected in the soil environment, and even the concentration in vegetables and fruits has reached levels that have an impact on children's health, which has attracted growing attention. Moreover, microplastics (MPs) in the soil system are also of increasing concern worldwide. The effects of MPs on the adsorption of organic pollutants in soil systems, however, remain largely unexplored. In this study, MPs common in greenhouse vegetable soil (polyethylene, polyvinyl chloride and polystyrene) were selected to investigate the effect of MPs occurrence on the adsorption of 17β‑estradiol (E2) in soil under various conditions. The experimental results showed that the adsorption capacity of MPs to E2 is stronger than that of soil. Moreover, the occurrence of MPs in soil increased the adsorption capacity for E2, and the addition amount and aging of MPs enhanced the promotion effect. This enhancement indicated that the input of MPs into soil might reduce the mobility of E2 by improving the adsorption capacity of the soil. These results deepen the understanding of the adsorption behavior of E2 in the coexisting system of MPs and soil and provide a theoretical basis for E2 pollution control.