Sulfur-modified biochar as a soil amendment to stabilize mercury pollution: An accelerated simulation of long-term aging effects

Sulfur-functionalized biochar: Synthesis, characterization, and utilization for contaminated soil and water remediation-a review

The development of innovative, eco-friendly, and cost-effective adsorbents is crucial for addressing the widespread issue of organic and inorganic pollutants in soil and water. Recent advancements in sulfur reagents-based materials, such as FeS, MoS2, MnS, S0, CS2, Na2S, Na2S2O32-, H2S, S-nZVI, and sulfidated Fe0, have shown potential in enhancing the functional properties and elemental composition of biochar for pollutant removal. This review explores the synthesis and characterization of sulfur reagents/species functionalized biochar (S-biochar), focusing on factors like waste biomass attributes, pyrolysis conditions, reagent adjustments, and experimental parameters. S-biochar is enriched with unique sulfur functional groups (e.g., C-S, -C-S-C, C=S, thiophene, sulfone, sulfate, sulfide, sulfite, elemental S) and various active sites (Fe, Mn, Mo, C, OH, H), which significantly enhance its adsorption efficiency for both organic pollutants (e.g., dyes, antibiotics) and inorganic pollutants (e.g., metal and metalloid ions). The literature analysis reveals that the choice of feedstock, influenced by its lignocellulosic content and xylem structure, critically impacts the effectiveness of pollutant removal in soil and water. Pyrolysis parameters, including temperature (200-600 °C), duration (2-10 h), carbon-to-hydrogen (C:H) and oxygen-to-hydrogen (O:H) ratios in biochar, as well as the biochar-to-sulfur reagent modification ratio, play key roles in determining adsorption performance. Additionally, solution pH (2-8) and temperature (288, 298, and 308 K) affect the efficiency of pollutant removal, though optimal dosages for adsorbents remain inconsistent. The primary removal mechanisms involve physisorption and chemisorption, encompassing adsorption, reduction, degradation, surface complexation, ion exchange, electrostatic interactions, π-π interactions, and hydrogen bonding. This review highlights the need for further research to optimize synthesis protocols and to better understand the long-term stability and optimal dosage of S-biochar for practical environmental applications.

An integrated framework for source apportionment and spatial distribution of mercury in agricultural soil near a primary ore mining site

Mercury (Hg) is a global environmental concern that affects both humans and ecosystem. The comprehensive understanding of sources and dynamics is crucial for facilitating targeted and effective control strategies. Herein, a robust approach integrating Multivariate Statistics, Geostatistics, and Positive Matrix Factorization (PMF) was employed to quantitatively elucidate the distribution and sources of Hg in agricultural lands. Results indicated elevated Hg concentrations in the land with 74.46% of soils, including 84.85% of topsoil, 69.70% of subsoil, and 67.31% of deepsoil, exceeding risk screening value. Geoaccumulation Index of Hg in soil surpassed level Ⅱ with more than 50% of Hg in the residual fraction regardless of the layer or location. The levels of Hg in surface water for irrigation exhibited a negative correlation with the distance from the mine and a positive correlation with that in sediment (R2>0.78, p < 0.01), suggesting the downstream migration and remobilization from sediment. Source apportion revealed that human activities as primary contributors despite high variability across locations and soil layers. Contributions to downstream soil Hg from Natural Background (NB), Primary Ore Mining (OM), Agricultural Practices (AP), and Wastewater Irrigation (WI) were 15.5%, 83.1%, 1.3%, and 0.1%, respectively. A reliable approach for source apportionment of Hg in soil was suggested, demonstrating potential applicability in the risk management of Hg-contaminated sites.

Selenium-phosphorus modified biochar reduces mercury methylation and bioavailability in agricultural soil

Biochar is a frequently employed for solidifying and stabilizing mercury (Hg) contamination in soil. However, it often results in an elevated presence of soil methylmercury (MeHg), which introduces new environmental risks. Consequently, there is a necessity for developing a safer modified biochar for use in Hg-contaminated soil. This study employed sodium selenite (at a safe dosage for soil) and hydroxyapatite to modify straw biochar (BC) based on the interaction between selenium (Se) and phosphorus (P). This process led to the formation of Se-modified biochar (Se-BC), P-modified biochar (P-BC), and Se and P co-modified biochar (Se-P-BC). Additionally, solvent adsorption experiments and pot experiments (BC/soil mass ratio: 0.5 %) were conducted to investigate the impacts of these soil amendments on soil Hg methylation and bioavailability. Se and P co-modification substantially increased the surface area, pore volume, and Hg adsorption capacity of BC. BC treatment increased the simulated gastric acid-soluble Hg, organo-chelated Hg, and MeHg in the soil. Conversely, Se-P-BC significantly reduced these forms of Hg in the soil, indicating that Se-P-BC can transform soil Hg into less bioavailable states. Among the different biochar treatments, Se-P-BC exhibited the most pronounced reductions in soil MeHg, total Hg, and MeHg in water spinach, achieving reductions of 63 %, 71 %, and 70 %, respectively. The co-modification of Se and P displayed a synergistic reduction effect in managing soil Hg pollution, which is associated with the increase of available Se in the soil due to phosphorus addition. The significantly reduced dissolved organic carbon and the abnormally high SO42- concentration in the soil of Se-P-BC treatment also inhibited Hg methylation and bioavailability in the soil. In summary, Se-P-BC substantially increased reduction percentage in plant Hg content while mitigating the risk of secondary pollution arising from elevated soil MeHg.

Application of biochar on soil bioelectrochemical remediation: behind roles, progress, and potential

Bioelectrochemical systems (BESs) that combine electrochemistry with biological methods have gained attention in the remediation of polluted environments, including wastewater, sludge, sediments, and soils. The most attractive advantage of BESs is that the solid electrode is used as an inexhaustible electron acceptor or donor, and biocurrent directly converted from organics can afford the reaction energy of contaminant breakdown, crossing the internal energy barrier of endothermic degradation, which achieves a continuous biodegradation process without the simultaneous use of exogenetic chemicals and bioelectricity recovery. However, soil BESs are hindered by expensive electrode materials, difficult pollutant and electron transfer, low microbial competitive activity, and biocompatibility in contamination remediation. Fortunately, introducing biochar into soil BESs could reveal a high potential in addressing these BES inadequacies. The characteristics of biochar, e.g., conductivity, transferability, high specific surface area, high porosity, large functional groups, and biocompatibility, can improve the performance of soil BESs. In fact, biochar not only carries electrons but also transfers nutrients, pollutants, and even bacteria by facilitating transmission in the bioelectric field of BESs. Consequently, the abilities of biochar make for better functionality of BESs. This review collates information on the roles, application, and progress of biochar in soil BESs, and future prospects are given. It is beneficial for environmental researchers and engineers to extend BES application in environmental remediation and to assist the progress of carbon sequestration and emission reduction based on the inertia of biochar and the blocking of electron flow to form methane.

Tuning active sites on biochars for remediation of mercury-contaminated soil: A comprehensive review

Mercury (Hg) contamination is acknowledged as a global issue and has generated concerns globally due to its toxicity and persistence. Tunable surface-active sites (SASs) are one of the key features of efficient BCs for Hg remediation, and detailed documentation of their interactions with metal ions in soil medium is essential to support the applications of functionalized BC for Hg remediation. Although a specific active site exhibits identical behavior during the adsorption process, a systematic documentation of their syntheses and interactions with various metal ions in soil medium is crucial to promote the applications of functionalized biochars in Hg remediation. Hence, we summarized the BC's impact on Hg mobility in soils and discussed the potential mechanisms and role of various SASs of BC for Hg remediation, including oxygen-, nitrogen-, sulfur-, and X (chlorine, bromine, iodine)- functional groups (FGs), surface area, pores and pH. The review also categorized synthesis routes to introduce oxygen, nitrogen, and sulfur to BC surfaces to enhance their Hg adsorptive properties. Last but not the least, the direct mechanisms (e.g., Hg- BC binding) and indirect mechanisms (i.e., BC has a significant impact on the cycling of sulfur and thus the Hg-soil binding) that can be used to explain the adverse effects of BC on plants and microorganisms, as well as other related consequences and risk reduction strategies were highlighted. The future perspective will focus on functional BC for multiple heavy metal remediation and other potential applications; hence, future work should focus on designing intelligent/artificial BC for multiple purposes.

Unraveling the aging dynamics in the simultaneous immobilization of soil metal(loid)s using oxides

Immobilization represents the most extensively utilized technique for the remediation of soils contaminated by heavy metals and metalloids. However, it is crucial to acknowledge that contaminants are not removed during this process, thereby leaving room for potential mobilization over time. Currently, our comprehension of the temporal variations in immobilization efficacy, specifically in relation to amendments suitable for industrial sites, remains very limited. To address this knowledge gap, our research delved into the aging characteristics of diverse oxides, hydroxides, and hydroxy-oxides (collectively referred to as oxides) for the simultaneous immobilization of arsenic (As), cadmium (Cd), and antimony (Sb) in soils procured from 16 contaminated industrial sites. Our findings unveiled that Ca-oxides initially showed excellent immobilization performance for As and Sb within 7 days but experienced substantial mobilization by up to 71 and 13 times within 1 year, respectively. In contrast, the efficacy of Cd immobilization by Ca-oxides was enhanced with the passage of time. Fe- and Mg-oxides, which primarily operate through encapsulation or surface complexation, exhibited steady immobilization performances over time. This reliable and commendable immobilization effect was observed across distinct soils characterized by varying physicochemical properties, including pH, texture, CEC, TOC, and EC, underscoring the suitability of such amendments for immobilizing metal(loid)s in diverse soil types. MgO, in particular, displayed even superior immobilization performance over time, owing primarily to gradual hydration and physical entrapment effects. Remarkably, Mg-Al LDHs emerged as the most effective candidate for the simultaneous immobilization of As, Cd, and Sb. The results obtained from this study furnish valuable data for future investigations on the immobilization of metals and metalloids in industrial soils. They enable the projection of immobilization performance and offer practical guidance in selecting suitable amendments for the immobilization of metal(loid)s.

Chemical and mechanical coating of sulfur on baby corn biochar and their role in soil Pb availability, uptake, and growth of tomato under Pb contamination

In recent ages, industrial revolution and natural weathering processes have been increasing lead (Pb) contamination in agricultural soils, therefore, green remediation technologies are becoming attractive and cost-effective. In the current pot study, 1% and 2% (w/w) application rates of sulfur (S) alone and novel chemo-mechanically S-modified baby corn biochars (CSB and MSB) were applied in a Pb-contaminated (500 mg/kg) soil to evaluate tomato (Lycopersicon esculentum L.) growth, Pb uptake and its soil availability. The results from SEM-EDS and XRD patterns confirmed the S enrichment on the surface of baby-corn biochar. Further, Pb treatment alone imposed a significant reduction in biomass accumulation, photosynthetic pigments, antioxidative mechanism, root traits, and Pb-tolerance index because of increased soil Pb availability and its uptake, translocation and biological accumulation in various tissues of tomato. However, incorporation of lower rate of elemental S (1%) and higher rates of biochars, especially chemically S-modified biochar, CSB (2%) significantly improved dry biomass production, Pb-tolerance index, physiological attributes and antioxidative defense system of tomato plants. These results might be due to a prominent decrease in soil Pb availability by 37.5%, Pb concentration in shoot by 66.7% and root by 58.3%, soil to root transfer by 33.8%, and root to shoot transfer by 20.2% in tomato plants under 2% application rate of CSB, as compared with the Pb treatment without any amendment. Moreover, sulfur treatment induced a significant impact in reduction of soil pH (from 8.97-7.47) as compared to the biochar treatments under Pb-toxicity. The current findings provided an insight that 2% chemically S-modified biochar (CSB) has significant potential to improve the tomato growth by reducing Pb bioavailability in the Pb-contaminated soil, compared to the S alone and MSB amendments.

Assessing mercury pollution at a primary ore site with both ancient and industrial mining and smelting activities

The Minamata Convention on Mercury has mandated a renewed global effort to tackle Hg pollution. The present study evaluates Hg pollution at a primary Hg production site exploited since the Qin Dynasty (200s BC), with intensive industrial scale production over the past four decades. This single location accounts for over 95% total Hg production in China in recent years. To assess the environmental risk and effectiveness of recently implemented control measures, we collected 90 soil samples, 60 plant tissue samples, 47 sediment samples, and 47 river water samples from the site and its vicinity. A site-specific conceptual site model was established based on the sources, migration transformation pathways of Hg pollutant and its exposure scenarios. The maximum soil Hg concentration reached 10,451 mg kg-1, posing a high health and ecological risk. Vegetable and crop Hg concentrations outside the site reached 0.23 mg kg-1 in rice grains and 4.24 mg kg-1 in green onion. The highest health risk, with a hazard quotient of 130.66, was observed in the Ore Storage Site, which reduced to 17.14 when Hg bioavailability was considered. Risk control measures implemented in recent years included a stormwater collection system and capping of the tailing pond area with clean imported soil. These measures were generally successful; however, Hg in the tailings were found to be contaminating the imported surficial soil due to rainfall saturation and upward migration, suggesting a need for long-term post remedial site monitoring and maintenance. We also found that mining and smelting activities have contaminated a 6 km stretch of a nearby river, with sediment Hg concentrations reaching 2819 mg kg-1, and water column concentrations reaching 193.21 ng L-1. The sediment and water concentrations are highly correlated (R2 = 0.78), suggesting that, with risk control measures in place, a reservoir of Hg in polluted river sediment is now driving pollution in the water column. This work demonstrates that primary Hg mining has caused widespread and serious soil and water pollution. Risk control measures can reduce human health and ecological risks, but robust monitoring and maintenance are required for remediation to be effective in the long-term.

Mercury reduction by black carbon under dark conditions

An accurate depiction of mercury (Hg) reduction is important to predict Hg biogeochemistry in both aquatic and soil systems. Although the photoreduction of Hg is well documented, reduction in the dark is poorly known and is thus the focus of this work. Black carbon (BC), an important constituent of organic matter in environments, can reduce Hg2+ in dark and oxygen-deficient conditions. Fast removal of Hg2+ in BC/Hg2+ solution was observed, with 4.99-86.88 L mg-1h-1 of the reaction rate constant, which could be ascribed to the combined actions of adsorption and reduction. Meanwhile, slow Hg reduction was obtained, compared to Hg removal, with 0.06-2.16 L mg-1h-1 of the reaction rate constant. Thus, in the initial stage, Hg2+ removal was mainly triggered by adsorption, rather than reduction. Afterward, the adsorbed Hg2+ on black carbon was converted into Hg0. Dissolved black carbon and aromatic CH on particulate black carbon were dominant triggers of Hg reduction for black carbon. During Hg reduction, the intastable intermediate, formed in the complex between aromatic CH and Hg2+, behaved as persistent free radicals, which could be detected by in situ electron paramagnetic resonance. Subsequently, the intastable intermediate was mainly converted into CO on black carbon and Hg0. Corresponding results of the present study highlight the important role of black carbon in the Hg biogeochemical cycle.

Removal of mercury from water by phytoremediation process with Salvinia natans(L.) All

Mercury contamination from human activities is a severe environmental problem. The low cost of rhizofiltration of heavy metal-contaminated environments is causing an increasing interest in these technologies. The present study demonstrates the effectiveness of mercury removal from water by phytoremediation using S. natans. Plants cultured and collected from the environment were used. The study used Hoagland's liquid medium contaminated with mercury: 0.15, 0.20, and 0.30. The bioconcentration factor obtained was 275-780. The relative growth rate was up to 0.12 g/gd and was much better for cultured plants than those collected from the environment. The removal rate of toxic metal was up to 94%. Total protein increased for cultures plants by up to 84%, while it decreased by up to 30% for those taken from the environment. Total chlorophyll for cultured plants decreased by up to 54%, which could be due to the toxic effect of the metal.

Safe Production Strategies for Soil-Covered Cultivation of Morel in Heavy Metal-Contaminated Soils

Morel is a popular edible mushroom with considerable medicinal and economic value which has garnered global popularity. However, the increasing heavy metal (HM) pollution in the soil presents a significant challenge to morels cultivation. Given the susceptibility of morels to HM accumulation, the quality and output of morels are at risk, posing a serious food safety concern that hinders the development of the morel industry. Nonetheless, research on the mechanism of HM enrichment and mitigation strategies in morel remains scarce. The morel, being cultivated in soil, shows a positive correlation between HM content in its fruiting body and the HM content in the soil. Therefore, soil remediation emerges as the most practical and effective approach to tackle HM pollution. Compared to physical and chemical remediation, bioremediation is a low-cost and eco-friendly approach that poses minimal threats to soil composition and structure. HMs easily enriched during morels cultivation were examined, including Cd, Cu, Hg, and Pb, and we assessed soil passivation technology, microbial remediation, strain screening and cultivation, and agronomic measures as potential approaches for HM pollution prevention. The current review underscores the importance of establishing a comprehensive system for preventing HM pollution in morels.

Unveiling the Role of Dissolved Organic Matter on the Hg Phytoavailability in Biochar-Amended Soils

Biochar can effectively reduce the phytoavailability of mercury (Hg) in soil, but the mechanisms are not fully understood. In this study, the dynamic changes in Hg content adsorbed by the biochar (BC-Hg), Hg phytoavailability in the soil (P-Hg), and soil dissolved organic matter (DOM) characteristics were determined over a 60-day treatment period. Biochar obtained at 300 °C, 500 °C and 700 °C reduced the P-Hg concentration assessed by MgCl2 extraction by 9.4%, 23.5% and 32.7%, respectively. However, biochar showed a very limited adsorption on Hg, with the maximum BC-Hg content only accounting for 1.1% of the total amount. High-resolution scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM-EDS) results showed that the proportion of Hg atoms in biochar after 60 d was barely detectable. Biochar treatment can shift soil DOM toward higher aromatic content and molecular weight. Additionally, the addition of high-temperature biochar increased more humus-like components, but low-temperature biochar increased more protein-like components. Correlation analysis and partial least squares path modeling (PLS-PM) showed that biochar promoted humus-like fractions formation to reduce the Hg phytoavailability. This research has deepened the understanding of the mechanisms by which biochar stabilizes Hg in agricultural soils.

Mechanisms and biological effects of organic amendments on mercury speciation in soil-rice systems: A review

Mercury (Hg) pollution is a well-recognized global environmental and health issue and exhibits distinctive persistence, neurotoxicity, bioaccumulation, and biomagnification effects. As the largest global Hg reservoir, the Hg cumulatively stored in soils has reached as high as 250-1000 Gg. Even more concerning is that global soil-rice systems distributed in many countries have become central to the global Hg cycle because they are both a major food source for more than 3 billion people worldwide and the central bridge linking atmospheric and soil Hg circulation. In this review, we discuss the form distribution, transformation, and bioavailability of Hg in soil-rice systems by focusing on the Hg methylation and demethylation pathways and distribution, uptake, and accumulation in rice plants and the effects of Hg on the community structure and ecological functions of microorganisms in soil-rice systems. In addition, we clarify the mechanisms through which commonly used humus and biochar organic amendments influence Hg and its environmental effects in soil-rice systems. The review also elaborates on the advantages of sulfur-modified biochars and their critical role in controlling Hg migration and bioavailability in soils. Finally, we provide key information about Hg pollution in soil-rice systems, which is of great significance for developing appropriate strategies and mitigation planning to limit Hg bioconcentration in rice crops and achieving key global sustainable development goals, such as the guarantee of food security and the promotion of sustainable agriculture.

Inorganic versus organic fertilizers: How do they lead to methylmercury accumulation in rice grains

Both inorganic and organic fertilizers are widely used to increase rice yield. However, these fertilizers are also found to aggravate mercury methylation and methylmercury (MeHg) accumulation in paddy fields. The aim of this study was to reveal the mechanisms of inorganic and organic fertilizers on MeHg accumulation in rice grains, which are not yet well understood. Potting cultures were conducted in which different fertilizers were applied to a paddy soil. The results showed that both inorganic and organic fertilizers increased MeHg concentrations rather than biological accumulation factors (BAFs) of MeHg in mature rice grains. Inorganic fertilizers, especially nitrogen fertilizer, enhanced the bioavailability of mercury and the relative amount Hg-methylating microbes and therefore intensified mercury methylation in paddy soil and MeHg accumulation in rice grains. Unlike inorganic fertilizers, organic matter (OM) in organic fertilizers was the main reason for the increase of MeHg concentrations in rice grains, and it also could immobilize Hg in soil when it was deeply degraded. The enhancement of MeHg concentrations in rice grains induced by inorganic fertilizers (5.18-41.69%) was significantly (p < 0.05) lower than that induced by organic fertilizers (80.49-106.86%). Inorganic fertilizers led to a larger increase (50.39-99.28%) in thousand-kernel weight than MeHg concentrations (5.18-41.69%), resulting in a dilution of MeHg concentrations in mature rice grains. Given the improvement of soil properties by organic fertilizer, increasing the proportion of inorganic fertilizer application may be a better option to alleviate MeHg accumulation in rice grains and guarantee the rice yield in the agricultural production.

Recent developments in modification of biochar and its application in soil pollution control and ecoregulation

Soil pollution has become a real threat to mankind in the 21st century. On the one hand, soil pollution has reduced the world's arable land area, resulting in the contradiction between the world's population expansion and the shortage of arable land. On the other hand, soil pollution has seriously disrupted the soil ecological balance and significantly affected the biodiversity in the soil. Soil pollutants may further affect the survival, reproduction and health of humans and other organisms through the food chain. Several studies have suggested that biochar has the potential to act as a soil conditioner and to promote crop growth, and is widely used to remove environmental pollutants. Biochar modified by physical, chemical, and biological methods will affect the treatment efficiency of soil pollution, soil quality, soil ecology and interaction with organisms, especially with microorganisms. Therefore, in this review, we summarized several main biochar modification methods and the mechanisms of the modification and introduced the effects of the application of modified biochar to soil pollutant control, soil ecological regulation and soil nutrient regulation. We also introduced some case studies for the development of modified biochars suitable for different soil conditions, which plays a guiding role in the future development and application of modified biochar. In general, this review provides a reference for the green treatment of different soil pollutants by modified biochar and provides data support for the sustainable development of agriculture.

First "unsaturated soils" view towards quantitative adsorption and immobilization mechanisms of Cd by biochar in soils during aging

Instead of traditional batch and column experiments with large water-soil ratios, this study investigated the behaviors and mechanisms of Cd adsorption and immobilization by biochar in unsaturated soils, in which the soil moisture conditions were closer to those in the actual field. The transport, transformation, and immobilization of cadmium (Cd) by pristine and KMnO₄-modified biochars in unsaturated soils were investigated during a 48-week mild aging process. Biochar acidified with HCl solution was employed to quantify the contributions of mineral and non-mineral components in biochar to Cd adsorption and immobilization in unsaturated soils with a three-layer mesh method. The behaviors and mechanisms of Cd adsorption by biochar in unsaturated soils significantly differed from those in aqueous solutions. The equilibrium times of Cd adsorption by biochar in unsaturated soils (weeks) were much longer than those in aqueous solutions (hours). The percentages of the Cd adsorbed by pristine and modified biochar remained relatively constant relative to the total Cd in unsaturated soils, which accounted for 39.50-49.39 % and 57.35-68.94 %, respectively. The contribution of mineral components to Cd adsorption dominated in both unsaturated soils (45.00-94.09 %) and aqueous solutions (70.73-95.51 %). The process of Cd immobilization in unsaturated soils was that biochar firstly adsorbed the exchangeable Cd from the soil, and then converted it to relatively stable Cd. After aging for 48 weeks, the contributions of non-mineral components to Cd immobilization dominated in unsaturated soil with a low concentration (1.23 mg·kg^-1), and the contributions of mineral components to Cd immobilization dominated in unsaturated soil with medium-high concentrations (4.08-51.26 mg·kg^-1).

Impact of sulfur-impregnated biochar amendment on microbial communities and mercury methylation in contaminated sediment

S-impregnation of biochar through elemental S streaming is known to increase its sorption performance against Hg and methyl mercury (MeHg). However, the effects of %S-loading on biochar's mechanism and sorption capacities for MeHg, and its consequent impact when used as an amendment material for Hg-contaminated sediments, are poorly understood, and thus, were investigated in this work. Our results showed that a minimum sulfur loading of 1% was the most effective in reducing MeHg levels in sediments. At higher %S-loading (3-20%), the reduction in surface area, pore blockage due to unreacted sulfur particles, and presence of poorly bound sulfur species resulted in lowered effectiveness for MeHg control. Increasing S-functionalization during impregnation shifted the sorption process of MeHg from Hg-O to Hg-S in S-impregnated biochar (BCS). Our 60-day slurry experiment showed a significant reduction in pore water THg (40-70%) and MeHg (30-55%), as well as sediment MeHg (50-60%) in biochar-amended sediments. The reduction in the bioavailable Hg resulted in lowered Hg methylation, as supported by the suppression of both the Fe- and SO₄^2--reduction activities in the amended sediments. The microbial community structure in BCS-amended sediments showed a shift towards sulfur-consuming, iron-reducing, thiosulfate-oxidizing, and sulfate-reducing bacterial populations. At the genus level, the overall relative abundance of principal Hg methylators was also lower in the BCS treatment than in the unamended sediments. This study highlights the application of BCS as a promising strategy for remediation of Hg-contaminated sediments.

How Biochar Derived from Pond Cypress (Taxodium Ascendens) Evolved with Pyrolysis Temperature and Time and Their End Efficacy Evaluation

Biomass type, pyrolysis temperature, and duration can affect biochar properties simultaneously. To further clarify the mechanism of this interaction, the branch and leaf parts of Pond cypress (Taxodium ascendens) were separately pyrolyzed at four peak temperatures (350 °C, 450 °C, 650 °C, and 750 °C) for three different durations (0.5 h, 1 h, and 2 h) in this study. The resulting biochar properties were measured, which included the yield, specific surface area (SSA), pH, EC (electricity conductivity), the bulk and surface elemental composition, and the contents of moisture, ash, fixed carbon, and volatile matter. The results showed that the pyrolysis temperature was more determinant for the modification of all biochar, but the residence time had a significant effect on the yield, pH, and SSA of branch-based biochar (B-biochar) at specific temperatures. However, such a phenomenon only happened on the pH of leaf-based biochar (L-biochar). Results: (1) With the temperature at 350 and 650 °C, the residence time had a significant effect on the yield of B-biochar. (2) The pH of B-biochar and L-biochar varied considerably between durations when the heating temperature hit 650 and 750 °C. (3) The SSA of B-biochar possessed an obvious fluctuation with the time during the pyrolysis from 650 to 750 °C. According to the properties measured above, the principal component and the cluster analysis classified the 24 types of biochar made in this experiment into four groups and revealed that an obvious disparity existed between B-biochar and L-biochar that were pyrolyzed at temperatures ranging from 450 to 750 °C, which suggested that biomass type was the primary factor for biochar-making. All this information can provide valuable references for the optimization of biochar-making in the real world.

Natural field freeze-thaw process leads to different performances of soil amendments towards Cd immobilization and enrichment

Cadmium (Cd) soil pollution is a global issue affecting crop production and food safety. Remediation methods involving in-situ Cd immobilization have been developed, but their effectiveness can diminish under seasonal freeze-thaw aging processes. In this study, we assessed the field performance of four soil treatments at a seasonally frozen rice paddy. Amendments were applied at 2 wt%, including: (i) sepiolite (a 2:1 clay mineral), (ii) superphosphate, (iii) biochar (produced by rice husk at 500 °C for 2 h), and (iv) joint application of biochar & superphosphate (1:1 mixture by weight). Immobilization performance was determined as DTPA extractable Cd and plant uptake in various organs. Overall, the four treatments significantly reduced Cd bioavailability during the plant growth period, with average DTPA-extractable concentrations decreasing by 43%, 34%, 39% and 45% for the four treatments, respectively, relative to untreated soil (control). Rice grain yields from the superphosphate and the joint application treatments increased by 8.0% and 11.8%, respectively, and Cd accumulation within those grains reduced by 14.3% and 48.9%, respectively. During the winter non-growth period, freeze-thaw aging facilitated Cd mobilization, with DTPA-extractable Cd increasing by 16.9% in the control soil, relative to the initial period. However, this reduced to 10.9%, 14.4%, 7.6% and 5.0%, for the sepiolite, superphosphate, biochar and joint application treatments, respectively. Overall, the joint application of biochar and superphosphate provided the best performance in terms of both long-term Cd immobilization and rice production enhancement, offering a green remediation option for risk management at Cd contaminated rice paddies in seasonally frozen regions.

Cadmium long-term immobilization by biochar and potential risks in soils with different pH under combined aging

Cd long-term immobilization by biochar and potential risk in soils with different pH were quantified under a combined artificial aging, which simulated five years of aging in the field based on local climate. Two biochars (original and KMnO₄-modified) and five soils with different pH were tested, and an improved three-layer mesh method was employed in this study. Five aging cycles were carried out (Cycle 1-Cycle 5), and each aging cycle quantitatively simulated 1 year of natural aging. As the aging time increased, Cd leaching loss in all soils gradually increased from Cycle 1 to Cycle 5; for relatively stable Cd fraction, it decreased firstly and then stabilized in acidic and neutral soils (S1-S4), while it decreased firstly and then increased in alkaline soil (S5). Biochars significantly promoted Cd immobilization in strongly acidic soil (S1) by increasing relatively stable fractions and decreasing leaching loss. For weakly acidic and neutral soils (S2-S4), although biochars still had positive effects, the immobilization effects were weakened to certain extents compared with S1. The percentage of Cd leaching loss decreased by 19.12% in strongly acidic soil (S1) and by 1.12-11.35% in weakly acidic and neutral soils (S2-S4) after modified biochar treatment. For alkaline soil (S5), the application of biochars had negative effects on Cd immobilization by decreasing relatively stable fractions and increasing leaching loss, and posed risks to the environment. For strongly acidic soil (S1) and weakly acidic and neutral soils (S2-S4), the percentages of relatively stable fractions increased from 6.09-19.93% to 24.98-36.70% after modified biochar treatment. However, for alkaline soil, the percentage of relatively stable fractions decreased from 55.27% to 53.93% after biochar treatment. The more acidic the soil, the more effective the Cd immobilization by biochar. Biochars with high pH level are not suitable for the remediation of alkaline Cd contaminated soil.

A review of pristine and modified biochar immobilizing typical heavy metals in soil: Applications and challenges

In recent years, the application of biochar in the remediation of heavy metals (HMs) contaminated soil has received tremendous attention globally. We reviewed the latest research on the immobilization of soil HMs by biochar almost in the last 5 years (until 2021). The methods, effects and mechanisms of biochar and modified biochar on the immobilization of typical HMs in soil have been systematically summarized. In general, the HMs contaminating the soil can be categorized into two groups, the oxy-anionic HMs (As and Cr) and the cationic HMs (Pb, Cd, etc.). Reduction and precipitation of oxy-anionic HMs by biochar/modified biochar are the dominant mechanism for reducing HMs toxicity. Pristine biochar can effectively immobilize cationic HMs. The commonly applied modification method is to add substances that can precipitate HMs to the biochar. In addition, we assessed the risks of biochar applications. For instance, biochar may cause the leaching of certain HMs; biochar aging; co-transportation of biochar nanoparticles with HMs. Future work should focus on the artificial/intelligent design of biochar to make it suitable for remediation of multiple HMs contaminated soil.

Effect of Biochar on Metal Distribution and Microbiome Dynamic of a Phytostabilized Metalloid-Contaminated Soil Following Freeze-Thaw Cycles

In the present paper the effectiveness of biochar-aided phytostabilization of metal/metalloid-contaminated soil under freezing-thawing conditions and using the metal tolerating test plant Lolium perenne L. is comprehensively studied. The vegetative experiment consisted of plants cultivated for over 52 days with no exposure to freezing-thawing in a glass greenhouse, followed by 64 days under freezing-thawing in a temperature-controlled apparatus and was carried out in initial soil derived from a post-industrial urban area, characterized by the higher total content of Zn, Pb, Cu, Cr, As and Hg than the limit values included in the classification provided by the Regulation of the Polish Ministry of Environment. According to the substance priority list published by the Toxic Substances and Disease Registry Agency, As, Pb, and Hg are also indicated as being among the top three most hazardous substances. The initial soil was modified by biochar obtained from willow chips. The freeze-thaw effect on the total content of metals/metalloids (metal(-loid)s) in plant materials (roots and above-ground parts) and in phytostabilized soils (non- and biochar-amended) as well as on metal(-loid) concentration distribution/redistribution between four BCR (community bureau of reference) fractions extracted from phytostabilized soils was determined. Based on metal(-loid)s redistribution in phytostabilized soils, their stability was evaluated using the reduced partition index (Ir). Special attention was paid to investigating soil microbial composition. In both cases, before and after freezing-thawing, biochar increased plant biomass, soil pH value, and metal(-loid)s accumulation in roots, and decreased metal(-loid)s accumulation in stems and total content in the soil, respectively, as compared to the corresponding non-amended series (before and after freezing-thawing, respectively). In particular, in the phytostabilized biochar-amended series after freezing-thawing, the recorded total content of Zn, Cu, Pb, and As in roots substantially increased as well as the Hg, Cu, Cr, and Zn in the soil was significantly reduced as compared to the corresponding non-amended series after freezing-thawing. Moreover, exposure to freezing-thawing itself caused redistribution of examined metal(-loid)s from mobile and/or potentially mobile into the most stable fraction, but this transformation was favored by biochar presence, especially for Cu, Pb, Cr, and Hg. While freezing-thawing greatly affected soil microbiome composition, biochar reduced the freeze-thaw adverse effect on bacterial diversity and helped preserve bacterial groups important for efficient soil nutrient conversion. In biochar-amended soil exposed to freezing-thawing, psychrotolerant and trace element-resistant genera such as Rhodococcus sp. or Williamsia sp. were most abundant.

Revamping highly weathered soils in the tropics with biochar application: What we know and what is needed

Fast weathering of parent materials and rapid mineralization of organic matter because of prevalent climatic conditions, and subsequent development of acidity and loss/exhaustion of nutrient elements due to intensive agricultural practices have resulted in the degradation of soil fertility and productivity in the vast tropical areas of the world. There is an urgent need for rejuvenation of weathered tropical soils to improve crop productivity and sustainability. For this purpose, biochar has been found to be more effective than other organic soil amendments due to biochar's stability in soil, and thus can extend the benefits over long duration. This review synthesizes information concerning the present status of biochar application in highly weathered tropical soils highlighting promising application strategies for improving resource use efficiency in terms of economic feasibility. In this respect, biochar has been found to improve crop productivity and soil quality consistently through liming and fertilization effects in low pH and infertile soils under low-input conditions typical of weathered tropical soils. This paper identifies several advance strategies that can maximize the effectiveness of biochar application in weathered tropical soils. However, strategies for the reduction of costs of biochar production and application to increase the material's use efficiency need future development. At the same time, policy decision by linking economic benefits with social and environmental issues is necessary for successful implementation of biochar technology in weathered tropical soils. This review recommends that advanced biochar strategies hold potential for sustaining soil quality and agricultural productivity in tropical soils.

Effects of competitive adsorption with Ni(II) and Cu(II) on the adsorption of Cd(II) by modified biochar co-aged with acidic soil

To investigate the effects of competitive adsorption with Ni(II) and Cu(II) on the adsorption of Cd(II) by modified biochar co-aged with acidic soil, four biochars were employed in this study, namely original biochar, KMnO₄-modified biochar and two aged biochars which co-aged with an acidic soil using above biochars under freeze-thaw cycling and dry-wet cycling for 54 days simulating 6 years of natural aging. The results showed that biochar adsorption capacities of three heavy metal ions were in the order of Cd(II) > Cu(II) > Ni(II) in the single system while Cu(II) > Cd(II) > Ni(II) in binary and ternary systems. Modification improved biochar adsorption capacity of Cd(II), but competitive adsorption with Ni(II) and Cu(II) weakened the improvement of modification on adsorption performance of modified biochar in binary and ternary systems. The Q_MBC/Q_BC of Cd(II) (Q_MBC and Q_BC are the adsorption capacities of heavy metals by modified and original biochars) decreased from 231.57% (single system) to 216.67%∼219.41% (binary system) and further decreased to 207.74% (ternary system). Co-aging with soil weakened the adsorption capacities of biochars for Cd(II), even worse, competition aggravated this negative effect of co-aging. The Q_AMBC/Q_MBC of Cd(II) (Q_AMBC is the adsorption capacities of heavy metals by aged modified biochar) decreased from 65.41% (single system) to 14.43%∼19.46% (binary and ternary systems). Therefore, the impact of competition should be fully considered when evaluating Cd long-term remediation effects of modified biochar in Cd polluted soils accompanied with other heavy metals.

Aging features of metal(loid)s in biochar-amended soil: Effects of biochar type and aging method

Soil contamination with toxic metals and metalloids has become a major threat to global food security. Among various immobilization agents that can stabilize toxic metal(loid)s effectively, biochar is promising due to its ability to restore soil health. Yet the aging characteristics of biochar following its amendment in soil remain poorly explored. Therefore, this study used standard biochars to depict their aging effects on remediation of metal(loid)-contaminated soil. A total of 2304 observations were made, including 6 biochar feedstocks (rice husk, soft wood, oilseed rape straw, miscanthus straw, sewage sludge and wheat straw), 2 pyrolysis temperatures (550 °C, 700 °C), 8 metal(loid)s (Mn, Ni, Cu, Zn, As, Cd, Sb, Pb), 4 aging methods (natural aging, freeze-thaw cycling, wet-dry cycling, chemical oxidation with H₂O₂), and 6 sampling intervals. Sewage sludge biochars exhibited the highest resistance to both artificial and natural aging, which may be related to the abundant oxygen-containing functional groups that favor metal complexation, and poorly-developed pore structures that limit the access of natural aging forces. A distinct relationship between ash and temperature was observed, where for high-ash biochars, an increase in pyrolysis temperature indicated lower resistance to aging, while for low-ash biochars, elevated pyrolysis temperature led to higher resistance. The aging behaviors of Cu and Sb were quite similar, which were both highly susceptible to chemical oxidation-induced dissolved organic carbon (DOC) release. Wet-dry cycling and freeze-thaw cycling revealed aging patterns that were similar to those of naturally aged soils as confirmed by cluster analysis. Lab aging data were then compared with existing biochar field aging results. Contrasting long-term immobilization performances were found in different studies, which were attributed to various causes associated with both biochar property and climate. The results of this study provide fresh insights into the long-term risks in the management of metal(loid)-contaminated agricultural soils.

Immobilization of Sb in a smelting residue by micro-sized zero-valent iron: Long-term performance under accelerated exposure to strong acid rain

This study investigated the long-term leachability of antimony (Sb) in a smelting residue immobilized by three commercial micro-sized zero-valent iron (ZVI) products. Effect of oxic incubation time (14 days and 120 days) on the immobilization efficiency of Sb were compared, and the long-term leaching risk was evaluated by an accelerated exposure test, in which the slag was consecutively extracted by simulated strong acid rain (SSAR, HNO₃: H₂SO₄ = 1:2, pH = 3.20). Notably, all ZVI treatments efficiently immobilized the Sb in this slag in a short term (14 days); the one-step SSAR-leached Sb was reduced by 89%-91% compared to the original slag (5.9 mg/L) and was far below the environmental standard (0.6 mg/L) established by the US EPA. The sequential SSAR leaching results reflected that the 14-d incubated slags after ZVI treatments had strong H⁺ resistance, and the immobilized Sb was not easily activated by continuous SSAR corrosion. The binding of Sb with amorphous phase Fe oxyhydroxides (e.g. ferrihydrite) derived from ZVI corrosion played a dominant role in the Sb immobilization efficiency. However, the longer aging process (120 days) easily resulted in the reduction of Sb immobilization by ZVI treatments. The changes in crystallinity of Fe oxyhydroxides (transformation from poorly-crystalline to crystalline ones) and the pH elevation to alkaline range might explain the weakening of the immobilization of Sb in ZVI-amended slags with 120 days of incubation. In total, the effectiveness of Sb immobilization in smelting residue greatly depended on the type of ZVI and the aging process. Our work has demonstrated that the ZVI treatment was potentially feasible to mitigate the Sb leaching risk from smelting slags; however, the ZVI type needs to be carefully selected and its long-term performance should be adequately verified before practical application.

In-situ, Ex-situ, and nano-remediation strategies to treat polluted soil, water, and air - A review

Nanotechnology, as an emerging science, has taken over all fields of life including industries, health and medicine, environmental issues, agriculture, biotechnology etc. The use of nanostructure molecules has revolutionized all sectors. Environmental pollution is a great concern now a days, in all industrial and developing as well as some developed countries. A number of remedies are in practice to overcome this problem. The application of nanotechnology in the bioremediation of environmental pollutants is a step towards revolution. The use of various types of nanoparticles (TiO₂ based NPs, dendrimers, Fe based NPs, Silica and carbon nanomaterials, Graphene based NPs, nanotubes, polymers, micelles, nanomembranes etc.) is in practice to diminish environmental hazards. For this many In-situ (bioventing, bioslurping, biosparging, phytoremediation, permeable reactive barrier etc.) and Ex-situ (biopile, windrows, bioreactors, land farming etc.) methodologies are employed. Improved properties like nanoscale size, less time utilization, high adaptability for In-situ and Ex-situ use, undeniable degree of surface-region to-volume proportion for possible reactivity, and protection from ecological elements make nanoparticles ideal for natural applications. There are distinctive nanomaterials and nanotools accessible to treat the pollutants. Each of these methods and nanotools depends on the properties of foreign substances and the pollution site. The current designed review highlights the techniques used for bioremediation of environmental pollutants as well as use of various nanoparticles along with proposed In-situ and Ex-situ bioremediation techniques.

Long-term leachability of Sb in smelting residue stabilized by reactive magnesia under accelerated exposure to strong acid rain

This study investigated the long-term leachability of antimony (Sb) in a smelting residue (39519 mg/kg) solidified/stabilized by reactive magnesia (MgO). Different dosages of MgO (0% as control, 2%, 5%, and 10% on a dry basis) were compared, and the long-term performance was evaluated by an accelerated exposure test consist of 20 consecutive leaching steps with simulated strong acid rain (SAR, HNO₃: H₂SO₄ = 1:2, pH = 3.20) as the extractant. Notably, the MgO treatments efficiently reduced the Sb leachability. Compared to the original slag (8.3 mg/L), the leaching concentrations based on a Chinese standard HJ/T299-2007 were reduced by 58%, 79%, 85%, and 86% at MgO dosages of 0%, 2%, 5%, and 10%, respectively. Because the studied slag was rich in oxides like SiO₂, CaO, and MgO, the hydration reactions probably happened during the aging processes with oxic water. It was inferred that the formed hydration products have a self-solidification/stabilization function to suppress the Sb leaching from the solid phase. The mineralogical characterization results proved that the hydrated Mg(OH)₂ played an essential role in the decrease of Sb leachability. Besides, the MgO addition promoted the hydration of this smelting slag and formed new hydrate gels that immobilize Sb in this slag. Our results confirmed that MgO-amended slags were resistant to continuous SAR corrosion. Compared to the control, the dosage of 5% MgO could effectively reduce the cumulatively released Sb by 57%, with only 0.46% of total Sb could be leached. The decomposition of Mg(OH)₂ and hydrate gels determined the re-release of Sb in a long term. Our work has demonstrated that reactive MgO amendment could be potentially selected as an effective strategy for the treatment of Sb-containing smelting residues in field conditions.

Responses of bacterial taxonomic attributes to mercury species in rhizosphere paddy soil under natural sulphur-rich biochar amendment

Biochar and sulphur (S) are important factors regulating the level, speciation and transformation of mercury (Hg), leading to alterations in the assemblage of the soil microbial community. However, variations in the taxonomic attributes of the rhizosphere soil bacterial community arising from the Hg speciation in paddy soil, amended with natural S-rich biochar (NSBC) derived from the pyrolysis of S-rich oilseed rape straw, remain unclear. Herein, a rice pot experiment was conducted. Hg-polluted paddy soils were amended with NSBC and low-S biochar (LSBC) to evaluate the role of Hg chemical form affected by NSBC in regulating the taxonomic attributes of rhizosphere soil, including microbial abundance, composition, and ecological clusters within the co-occurrence network of microbial communities. Results showed that microbial abundance was higher in soils with lower Hg levels, and mean increases of 149 observed operational taxonomic units (OTUs) and 238 predicted OTUs (Chao 1) were observed, with a 1 mg kg^-1 decrease in the total Hg (T-Hg) content. Among the 13 predictor variables, the T-Hg content was the strongest and most consistent predictor of the bacterial taxonomic attributes. This finding may be attributed to the fact that the drastic reduction in T-Hg and Hg bioavailability induced by NSBC results in the decrease of Hg stress on the soil microbiome. Moreover, NSBC amendment shifted the ecological clusters toward the amelioration of Hg pollution.

Artificial intelligence (AI) applications in adsorption of heavy metals using modified biochar

The process of removal of heavy metals is important due to their toxic effects on living organisms and undesirable anthropogenic effects. Conventional methods possess many irreconcilable disadvantages pertaining to cost and efficiency. As a result, the usage of biochar, which is produced as a by-product of biomass pyrolysis, has gained sizable traction in recent times for the removal of heavy metals. This review elucidates some widely recognized harmful heavy metals and their removal using biochar. It also highlights and compares the variety of feedstock available for preparation of biochar, pyrolysis variables involved and efficiency of biochar. Various adsorption kinetics and isotherms are also discussed along with the process of desorption to recycle biochar for reuse as adsorbent. Furthermore, this review elucidates the advancements in remediation of heavy metals using biochar by emphasizing the importance and advantages in the usage of machine learning (ML) and artificial intelligence (AI) for the optimization of adsorption variables and biochar feedstock properties. The usage of AI and ML is cost and time-effective and allows an interdisciplinary approach to remove heavy metals by biochar.

Effect of production temperature and particle size of rice husk biochar on mercury immobilization and erosion prevention of a mercury contaminated soil

Mercury (Hg) contaminated soil is a potential hazardous material especially under soil erosion and surface runoff. This work aims to use rice husk biochar to immobilize Hg and prevent erosion, and find the optimal production temperature and particle size of the biochar. The biochars were produced at 300, 500, and 700 °C and sieved to three particle sizes ~20, < 2, and < 0.15 mm. They were applied to a Hg contaminated loamy sand (20.2 mg/kg) and undergone simulated rainfall erosion representing 7 years of heavy rain events in Beijing. All biochar amendments reduced the runoff volume by 5.1-15.4%. Hg amount in runoff were significantly reduced by 36.7-48.8% after the amendments of biochar. The Hg concentration of infiltration was reduced by biochar treatments except that produced at 300 °C, while its amount was increased due to larger infiltration volume. All biochar amendments significantly reduced soil loss in runoff by 43.5-77.2%. Hg was enriched in the sediments (39.7-46.8 mg/kg) compared with the parent soil (20.2 mg/kg) regardless of biochar treatment, but its bioavailability was low. Higher pyrolysis temperature of the rice husk biochars resulted in less runoff, more infiltration, and better erosion prevention, while the effect of biochar particle size is less significant.

Effects of sulfur-rich biochar amendment on microbial methylation of mercury in rhizosphere paddy soil and methylmercury accumulation in rice

Biochar amendment has the potential to reduce methylmercury (MeHg) uptake by rice grains in soil-rice ecosystem. Considering that sulfur can strongly bind Hg and thus reduce its bioavailability, S-modified biochar has been used to immobilize Hg in soils. However, whether natural S-enriched biochar can further reduce Hg and MeHg phytoavailability remains unknown. Moreover, the rhizosphere is one of the most important microbial hotspots regulating the pollutant dynamics in terrestrial ecosystems. Therefore, it is of greater practical significance to examine the impact of biochar amendment on MeHg production and phytoavailability in the rhizosphere versus nonrhizosphere. Here, by conducting a pot experiment, we evaluated the efficacy of biochar derived from sulfur-enriched oilseed rape straw to reduce MeHg accumulation in rice. The results demonstrated that: (1) biochar-induced enhancement of chloride ion and sulfate levels in the overlying water and pore water facilitate microbial methylation of Hg and thus MeHg production in rhizosphere soil. (2) biochar amendment increased rhizosphere soil sulfur content and humic acid-like substances, strengthening MeHg binding to soil, and thus reducing grain MeHg levels by 47%-75%. Our results highlight the necessity to applying natural sulfur-rich biochar accompanied with exogenous sulfur to further reduce MeHg phytoavailability.

A Review on Current Status of Biochar Uses in Agriculture

In a time when climate change increases desertification and drought globally, novel and effective solutions are required in order to continue food production for the world's increasing population. Synthetic fertilizers have been long used to improve the productivity of agricultural soils, part of which leaches into the environment and emits greenhouse gasses (GHG). Some fundamental challenges within agricultural practices include the improvement of water retention and microbiota in soils, as well as boosting the efficiency of fertilizers. Biochar is a nutrient rich material produced from biomass, gaining attention for soil amendment purposes, improving crop yields as well as for carbon sequestration. This study summarizes the potential benefits of biochar applications, placing emphasis on its application in the agricultural sector. It seems biochar used for soil amendment improves nutrient density of soils, water holding capacity, reduces fertilizer requirements, enhances soil microbiota, and increases crop yields. Additionally, biochar usage has many environmental benefits, economic benefits, and a potential role to play in carbon credit systems. Biochar (also known as biocarbon) may hold the answer to these fundamental requirements.

A critical review on performance indicators for evaluating soil biota and soil health of biochar-amended soils

Amendment of soil with biochar has been widely investigated for soil quality improvement in terms of biotic and abiotic functionalities. The performance of biochar-based amendment varies according to the site characteristics, biochar properties, and soil management targets. There is no existing review that summarizes a broad range of performance indicators to evaluate the health of biochar-amended soil. Based on the latest studies on soil amendment with biochar, this review critically analyzes the soil health indicators that reveal the potential impact of biochar amendment with respect to physicochemical properties, biological properties, and overall soil quality. It is found that soil pH, soil aggregate stability, and soil organic matter are the basic indicators that could influence most of the soil functions, which should be prioritized for measurement. Relevant functional indicators (e.g., erosion rate, crop productivity, and ecotoxicity) should be selected based on the soil management targets of biochar application in agricultural soils. With this review, it is expected that target-oriented performance indicators can be selected in future studies for field-relevant evaluation of soil amendment by biochar under different situations. Therefore, a more cost-effective and purpose-driven assessment protocol for biochar-amended soils can be devised by using relevant measurable attributes suggested in this review.

Formation and mechanisms of nano-metal oxide-biochar composites for pollutants removal: A review

Biochar, a carbon-rich material, has been widely used to adsorb a range of pollutants because of its low cost, large specific surface area (SSA), and high ion exchange capacity. The adsorption capacity of biochar, however, is limited by its small porosity and low content of surface functional groups. Nano-metal oxides have a large SSA and high surface energy but tend to aggregate and passivate because of their fine-grained nature. In combining the positive qualities of both biochar and nano-metal oxides, nano-metal oxide-biochar composites (NMOBCs) have emerged as a group of effective and novel adsorbents. NMOBCs improve the dispersity and stability of nano-metal oxides, rich in adsorption sites and surface functional groups, maximize the adsorption capacity of biochar and nano-metal oxides respectively. Since the adsorption capacity and mechanisms of NMOBCs vary greatly amongst different preparations and application conditions, there is a need for a review of NMOBCs. Herein we firstly summarize the recent methods of preparing NMOBCs, the factors influencing their efficacy in the removal of several pollutants, mechanisms underlying the adsorption of different pollutants, and their potential applications for pollution control. Recommendations and suggestions for future studies on NMOBCs are also proposed.

Mercury speciation in mine tailings amended with biochar: Effects on mercury bioavailability, methylation potential and mobility

Biochar is a low-cost and environmentally friendly amendment with strong ability for adsorption of mercury (Hg) from aqueous solutions, contaminated soils, and sediments. In the present study, six biochars were prepared from the pyrolysis of cocoa pod husk, sugarcane bagasse and banana pseudostem at 400 and 600 °C in order to use them as an organic amendment and to evaluate their capacities to reduce the bioavailability, methylation potential, and mobility of Hg present in mine tailings without environmental treatment. To quantify the effects of each variety of biochar, incubation experiments of soil were established by mixing mine tailings with 5% by weight of biochar for 90 days. Once the incubation time concluded, sequential extraction procedures were carried out to determine the fractionation of the Hg species. Speciation analysis results indicated that the remedial effects of biochar depended on the source of organic matter and pyrolysis temperature. The bioavailable and organic Hg fractions decreased respectively by up to 75 and 79%, indicating a methylation potential reduction. Immobile Hg fraction increased to 76% with respect to the control. Adsorption and stabilization to HgS from the soluble forms of Hg reduce the percentage of bioavailable Hg. The organic Hg fraction reduction was correlated with the decrease of the bioavailable Hg fraction and with direct adsorption processes in the biochar structure. Highly porous biochars developed at high temperature, with large contents of superficial polar functional groups (H/C), and high pH, electrical conductivity, ash percentage and cation exchange capacity values favor the stabilization and adsorption of Hg in mine tailings. In summary, the application of biochar could be an effective method for the remediation of Hg-contaminated mine tailings, transforming the Hg species into less toxic, soluble, reactive, and bioavailable forms.

Simple mercury determination using an enclosed quartz cell with cold vapour-atomic absorption spectrometry

A simple method for determining total inorganic mercury (Hg) in solution using an enclosed quartz cell applying cold vapour-atomic absorption spectrometry (CV-AAS) can reduce sample volume, reductant, and cost compared with those of official methods. The Hg determination under the optimised conditions achieves precision similar to that of conventional CV-AAS.

Potential of using a new aluminosilicate amendment for the remediation of paddy soil co-contaminated with Cd and Pb

Cadmium (Cd) and lead (Pb) are toxic heavy metals that impact human health and biodiversity. Removal of Cd/Pb from contaminated soils is a means for maintaining environmental sustainability and biodiversity. In this study, we applied a newly modified material fly ash (NA), zeolite (ZE), and fly ash (FA) to the paddy soils and evaluated the effects of Cd/Pb accumulation in rice via a one-year field experiment. The results showed that the application of NA and ZE enhanced the soil pH and nutrients to a large extent and reduced the availability of Cd/Pb in soil. The Cd and Pb concentrations in rice grains decreased by 32.8% and 62.9%, respectively, with the NA treatments. Similarly, the application of ZE reduced the Cd and Pb concentrations in rice grains by a factor of 27.9% and 63.5%, respectively, which indicates that the amendments can promote the transfer of Cd and Pb from acid-exchangeable fraction to oxidizable and residual fractions. The Cd/Pb showed a significant positive correlation to other metal ions and a negative correlation to the nutrients. Generally, the application of NA and ZE was effective in reducing Cd/Pb accumulation and improving rice yield. Moreover, the NA was more cost-effective than ZE. Hence, this study proves that NA may be a better amendment for remediation of Cd/Pb contaminated soils.

Effect of aging on stabilization of Cd and Ni by biochars and enzyme activities in a historically contaminated alkaline agricultural soil simulated with wet-dry and freeze-thaw cycling

Natural aging alters the surface physicochemical properties of biochars, which can affect the retention of heavy metals. This work investigated the effect of biochar aging on stabilization of heavy metals (Cd and Ni) and soil enzyme activities simulated with laboratory wet-dry (WD) and freeze-thaw (FT) cycling. A wheat straw (WS) biochar and a corn straw (CS) biochar were subjected to 30 WD or FT cycles, and Cd- and Ni-contaminated alkaline soils amended with the two fresh biochars (at 5% w/w) were subjected to 30-day constant moisture incubation and 30 WD or FT cycles. WD and FT aging caused slight reduction in the pH of the biochars, significant increases in their O contents and surface areas, and formation of new carbonate minerals. WS biochar was more effective than CS biochar at reducing the phytoavailable Cd in the soil, with reduction of 12.1%, 14.6%, and 12.9% under constant moisture incubation, WD aging, and FT aging, respectively. Reduction in phytoavailability of Ni by the addition of biochars was observed only under WD aging, by 17.0% and 18.5% in the presence of WS and CS biochars, respectively. Biochar amendment also reduced the distribution of Cd in the acid soluble and reducible fractions in all aging regimes. The addition of biochars decreased catalase activity in almost all aging regimes and invertase activity under FT aging, but increased urease activity under FT aging. Comparison of the enzyme activities in the soils amended with biochars under constant moisture and accelerated aging conditions indicates WD aging significantly decreased the activities of catalase, invertase, and urease in all treatments, while FT aging significantly increased urease activity in all treatments. These findings suggest that biochars can stabilize Cd in alkaline soils under changing environmental conditions, although the activities of some soil enzymes could be negatively impacted.

Analysis of the long-term effectiveness of biochar immobilization remediation on heavy metal contaminated soil and the potential environmental factors weakening the remediation effect: A review

Currently, the research and application of biochar in the remediation of heavy metal contaminated soil has become a hotspot, especially regarding the remediation of agricultural land. Biochar has been proved to be effective in reducing the content of available heavy metals in the soil as well as the heavy metals in plants. However, the long-term effectiveness of biochar immobilization has not been widely studied. In this review, retrospective search was carried out on the published literature results concerning remediation effects of biochar on different areas of heavy metal contaminated soil in the recent years, its application in field remediation (several years), and some potential abiotic and biotic factors that may weaken the immobilization effects of biochar. This results indicate that: (1) biochar is widely used in the remediation of heavy metal contaminated soil in different areas and has excellent immobilization effect. (2) Most of the research demonstrate that the immobilization effect of biochar is effective for 2-3 years or according to few results even for 5 years. However, there have been various reports claiming that the immobilization effect of biochar decreases with time. (3) Abiotic factors such as acid rain, flooded environment, changes in soil condition (pH, redox and dissolved organic matter) and changes in biochar (Cl^- and alkali leaching) can significantly weaken the immobilization effect of biochar. (4) Biotic factors such as plant roots, earthworms and soil microorganisms can also significantly reduce the immobilization effect of biochar. Therefore, field experiments having longer time span with biochar need to be further carried out, and the developmental research of modified biochar with a more stable immobilization effect also needs further attention.

Biochar Aging: Mechanisms, Physicochemical Changes, Assessment, And Implications for Field Applications

Biochar has triggered a black gold rush in environmental studies as a carbon-rich material with well-developed porous structure and tunable functionality. While much attention has been placed on its apparent ability to store carbon in the ground, immobilize soil pollutants, and improve soil fertility, its temporally evolving in situ performance in these roles must not be overlooked. After field application, various environmental factors, such as temperature variations, precipitation events and microbial activities, can lead to its fragmentation, dissolution, and oxidation, thus causing drastic changes to the physicochemical properties. Direct monitoring of biochar-amended soils can provide good evidence of its temporal evolution, but this requires long-term field trials. Various artificial aging methods, such as chemical oxidation, wet-dry cycling and mineral modification, have therefore been designed to mimic natural aging mechanisms. Here we evaluate the science of biochar aging, critically summarize aging-induced changes to biochar properties, and offer a state-of-the-art for artificial aging simulation approaches. In addition, the implications of biochar aging are also considered regarding its potential development and deployment as a soil amendment. We suggest that for improved simulation and prediction, artificial aging methods must shift from qualitative to quantitative approaches. Furthermore, artificial preaging may serve to synthesize engineered biochars for green and sustainable environmental applications.

Effect of immobilizing reagents on soil Cd and Pb lability under freeze-thaw cycles: Implications for sustainable agricultural management in seasonally frozen land

Agricultural soil contamination in seasonally frozen land threatens food security. It is necessary to investigate the effects of freeze-thaw cycles on heavy metal bioavailability so as to select suitable immobilization agents. In this study, the soil was collected from a mid-latitude agricultural site in Liaoning Province, China, which was spiked with cadmium (Cd²⁺) and lead (Pb²⁺). Four immobilization treatments were set up, including (i) corn stover biochar, (ii) organic fertilizer, (iii) combined biochar and organic fertilizer, and (iv) the control group. The immobilized soils were subjected to 16 freeze-thaw cycles to temperatures of -10 °C, -20 °C, and -30 °C. It was found that freeze-thaw cycling increased the labile cadmium (Cd) and lead (Pb) content in the soil (i.e., exchangeable). The organic fertilizer treatment performed best in short-term immobilization, which was demonstrated by the amount of diethylenetriaminepentaacetic acid (DTPA) extractable lead (Pb) being 17.3-53.3% lower than that of the other treatments, and 7.2-31.5% lower for cadmium (Cd). Biochar, on the other hand, displayed better long-term performance under freeze-thaw cycling. This is probably because the biochar's organic carbon content is relatively stable, and therefore, releases relatively little dissolved organic carbon (DOC) which could re-mobilize heavy metals. Furthermore, additional sorption sites are formed and the abundance of oxygen-containing functional groups increased when biochar breaks down during freeze-thaw cycles. Overall, the joint application of biochar and organic fertilizer had the greatest immobilization effect, which inhibited the cracking of soil aggregates, reduced the labile metal content, and displayed both short- and long-term immobilization effectiveness. It is suggested that combined biochar and organic fertilizer may offer an effective strategy for the sustainable agricultural management of cadmium (Cd) and lead (Pb) contaminated in seasonally frozen land.

Aqua regia digestion cannot completely extract Hg from biochar: A synchrotron-based study

Mercury (Hg) is commonly extracted from solid phase samples using aqua regia for total Hg (tHg) analysis. However, uncertainties exist regarding the complete extraction of Hg by aqua regia, especially from carbonaceous materials. To investigate whether aqua regia can completely extract Hg from biochars, batch-style experiments were carried out to evaluate extraction efficiency of aqua regia with respect to Hg-loaded biochar and to characterize the residual Hg speciation and spatial distribution. Different types of biochars (raw, FeCl₃-modified, and FeSO₄-modified, prepared at different temperatures) were reacted with Hg-spiked solution before the digestion experiments. Adsorption analyses indicate the biochars were successfully loaded with Hg and that the Hg content was higher in biochars pyrolyzed at higher temperature (900 versus 300 or 600 °C). The results of digestion experiments indicate Hg could not be completely extracted from the biochars tested, with a greater percentage of residual Hg in biochars pyrolyzed at 600 (60 ± 15%) and 900 (75 ± 22%) than 300 °C (7 ± 2%). Furthermore, the fraction of residual Hg in FeSO₄-modified biochars after aqua regia digestion was significantly lower than in FeCl₃-modified and unmodified biochars. Confocal micro-X-ray fluorescence imaging (CMXRFI) showed residual Hg in biochars is concentrated on surfaces prior to digestion, but more homogeneously distributed after digestion, which indicates Hg on biochar surface is more easily digested. Hg extended X-ray absorption fine structure (EXAFS) spectra modelling showed residual Hg in biochars mainly exists as Hg(II)-Cl. These results indicate extra caution should be paid for tHg determinations using aqua regia digestion method in soil (especially in forest), sediment, and peat samples containing black carbon, activated carbon, or biochar.