Integrated approach of whole-genome analysis, toxicological evaluation and life cycle assessment for pyrene biodegradation by a psychrophilic strain, Shewanella sp. ISTPL2

Simultaneous biodegradation of polycyclic aromatic hydrocarbons and phthalates by bacterial consortium and its bioremediation for complex polluted soil and sewage sludge

Simultaneous biodegradation of multiple micropollutantslike polycyclic aromatic hydrocarbons (PAHs) and phthalates (PAEs) by microbial consortia remain unclear. Here, four distinct bacterial consortia capable of degrading PAHs and PAEs were domesticated from sludge and its composts. PAH-degrading consortium HS and PAE-degrading consortium EC2 displayed the highest degradation efficiencies for PAHs (37 %-99 %) and PAEs (98 %-99 %), respectively, being significantly higher than those of individual member strains. Consortia HS and EC2 could simultaneously degrade both PAHs and PAEs. Remarkably, a synthetic consortium Syn by co-culturing consortia HS and EC2 demonstrated proficient simultaneous biodegradation for both PAHs (65 %-98 %) and PAEs (91 %-97 %). These consortia changed their community structure with enriching pollutant-degrading genera and extracellular polymeric substance contents to promote simultaneous biodegradation of multiple pollutants. Moreover, consortium Syn significantly enhanced degradation of both PAHs and PAEs in soil and sludge. This study provides strong candidates for simultaneous bioremediation of complex polluted environments by PAHs and PAEs.

Ecological and human health impact assessments based on long-term monitoring of soil PAHs near a coal-fired power plant

The combustion of coal in power plants releases significant amounts of polycyclic aromatic hydrocarbons (PAHs), which are highly toxic and carcinogenic. This study assesses the ecological and human health impacts of PAHs contamination from a coal-fired power plant over 8 years. The monitoring site selection considered the distance from the power plant and the prevailing wind direction in the investigated area. The results reveal that, during the monitoring period, PAH levels increased on average by 43%, 61%, and 37% in the zone of the prevailing wind direction, in the area proximate to the power plant, and the zone distant from it, respectively. The site, which has a radius of 4.5 km in the prevailing wind direction, exhibited the highest ecological and human health impacts. Additionally, a strong correlation was observed between environmental and human health impacts, depending on the distance from the power plant, particularly in areas with the prevailing wind direction. These insights contribute to a comprehensive understanding of the intricate dynamics linking power plant emissions, PAHs contamination, and their far-reaching consequences on the environment and human health.

The zebrafish gut microbiome influences benzo[a]pyrene developmental neurobehavioral toxicity

Early-life exposure to environmental toxicants like Benzo[a]pyrene (BaP) is associated with several health consequences in vertebrates (i.e., impaired or altered neurophysiological and behavioral development). Although toxicant impacts were initially studied relative to host physiology, recent studies suggest that the gut microbiome is a possible target and/or mediator of behavioral responses to chemical exposure in organisms, via the gut-brain axis. However, the connection between BaP exposure, gut microbiota, and developmental neurotoxicity remains understudied. Using a zebrafish model, we determined whether the gut microbiome influences BaP impacts on behavior development. Embryonic zebrafish were treated with increasing concentrations of BaP and allowed to grow to the larval life stage, during which they underwent behavioral testing and intestinal dissection for gut microbiome profiling via high-throughput sequencing. We found that exposure affected larval zebrafish microbiome diversity and composition in a manner tied to behavioral development: increasing concentrations of BaP were associated with increased taxonomic diversity, exposure was associated with unweighted UniFrac distance, and microbiome diversity and exposure predicted larval behavior. Further, a gnotobiotic zebrafish experiment clarified whether microbiome presence was associated with BaP exposure response and behavioral changes. We found that gut microbiome state altered the relationship between BaP exposure concentration and behavioral response. These results support the idea that the zebrafish gut microbiome is a determinant of the developmental neurotoxicity that results from chemical exposure.

Whole genome sequencing analysis and Box-Behnken design for the optimization of the decolourization of mixture textile dyes by halotolerant microbial consortium

The use of dyes in textile industries has resulted in substantially contaminated soil, water and ecosystem including fauna and flora. So, the application of eco-friendly approach for dyes removal is in great demand. The goal of this research was to develop and test a bacterial consortium for biodegrading dyes in artificial textile effluent (ATE) derived from mixture of Indigo carmine (40 mg/l); Malachite green (20 mg/l); Cotton bleu (40 mg/l); Bromocresol green (20 mg/l) and CI Reactive Red 66 (40 mg/l) dissolved in artificial seawater. The Box-Behnken design (BBD) which combine six variables with three levels each was used to determine the potential removal of dyes in ATE, by the selected microbial consortium (M31 and M69b). The experimental process indicated that decolourization of ATE reached 77.36 % under these conditions values: salinity (30 g/l), pH (9), peptone (5 g/l), inoculum size (1.5 108 CFU/ml), agitation (150 rpm) and contact time (72 h). The decolourization was confirmed by FTIR spectrum analysis of ATE before and after bacterial treatment. Bacterial strains used in this study were identified as Halomonas pacifica M31 and Shewanella algae M69b using 16 rDNA sequences. Moreover, the total genome analysis of M31 and M69b validated the implication of bacterial genes in mixture dyes removal. Therefore, the effect of the selected bacterial consortium on ATE removal was confirmed and it may be used in industrial wastewater treatment to issuing environmental safety.

Determining the degradation mechanism and application potential of benzopyrene-degrading bacterium Acinetobacter XS-4 by screening

In industrial wastewater treatment, organic pollutants are usually removed by in-situ microorganisms and exogenous bactericides. Benzo [a] pyrene (BaP) is a typical persistent organic pollutant and difficult to be removed. In this study, a new strain of BaP degrading bacteria Acinetobacter XS-4 was obtained and the degradation rate was optimized by response surface method. The results showed that the degradation rate of BaP was 62.73% when pH= 8, substrate concentration was 10 mg/L, temperature was 25 °C, inoculation amount was 15% and culture rate was 180 r/min. Its degradation rate was better than that of the reported degrading bacteria. XS-4 is active in the degradation of BaP. BaP is degraded into phenanthrene by 3, 4-dioxygenase (α subunit and β subunit) in pathway Ⅰ and rapidly forms aldehydes, esters and alkanes. The pathway Ⅱ is realized by the action of salicylic acid hydroxylase. When sodium alginate and polyvinyl alcohol were added to the actual coking wastewater to immobilize XS-4, the degradation rate of BaP was 72.68% after 7 days, and the removal effect was better than that of single BaP wastewater (62.36%), which has the application potential. This study provides theoretical and technical support for microbial degradation of BaP in industrial wastewater.

Enhanced textile dye removal from wastewater using natural biosorbent and Shewanella algae B29: Application of Box Behnken design and genomic approach

In this study, Box-Behnken design combining seven factors at three levels were used to optimize the elimination of CI Reactive Red 66 in artificial seawater, by the combination of eco-friendly bio-sorbents and acclimated halotolerant microbial strain. Results showed that macro-algae and cuttlebone (2 %) were the best natural bio-sorbent. Additionally, the selected halotolerant strain able to rapidly remove dye was identified as Shewanella algae B29. The optimization process revealed that decolourization of CI Reactive Red 66 yields reached 91.04 % under the following variable values: dyes concentration (100 mg/l), salinity (30 g/l), peptone (2 %), pH (5), algae C (3 %), cuttlebone (1.5 %) and agitation (150 rpm). The whole genome analysis of S. algae B29 demonstrated the presence of several genes coding for valuable enzymes involved in textile dyes biotransformation, adaptation to stress as well as biofilm formation implying its potential use in biological textile wastewater treatment.

Global occurrence of the bacteria with capability for extracellular reduction of iodate

The γ-proteobacterium Shewanella oneidensis MR-1 reduces iodate to iodide extracellularly. Both dmsEFAB and mtrCAB gene clusters are involved in extracellular reduction of iodate by S. oneidensis MR-1. DmsEFAB reduces iodate to hypoiodous acid and hydrogen peroxide (H₂O₂). Subsequently, H₂O₂ is reduced by MtrCAB to facilitate DmsEFAB-mediated extracellular reduction of iodate. To investigate the distribution of bacteria with the capability for extracellular reduction of iodate, bacterial genomes were systematically searched for both dmsEFAB and mtrCAB gene clusters. The dmsEFAB and mtrCAB gene clusters were found in three Ferrimonas and 26 Shewanella species. Coexistence of both dmsEFAB and mtrCAB gene clusters in these bacteria suggests their potentials for extracellular reduction of iodate. Further analyses demonstrated that these bacteria were isolated from a variety of ecosystems, including the lakes, rivers, and subsurface rocks in East and Southeast Asia, North Africa, and North America. Importantly, most of the bacteria with both dmsEFAB and mtrCAB gene clusters were found in different marine environments, which ranged from the Arctic Ocean to Antarctic coastal marine environments as well as from the Atlantic Ocean to the Indian and Pacific Oceans. Widespread distribution of the bacteria with capability for extracellular reduction of iodate around the world suggests their significant importance in global biogeochemical cycling of iodine. The genetic organization of dmsEFAB and mtrCAB gene clusters also varied substantially. The identified mtrCAB gene clusters often contained additional genes for multiheme c-type cytochromes. The numbers of dmsEFAB gene cluster detected in a given bacterial genome ranged from one to six. In latter, duplications of dmsEFAB gene clusters occurred. These results suggest different paths for these bacteria to acquire their capability for extracellular reduction of iodate.

Impact of biosurfactant and iron nanoparticles on biodegradation of polyaromatic hydrocarbons (PAHs)

Polycyclic aromatic hydrocarbons (PAHs) are hazardous toxic contaminants and considered as primary pollutants due to their persistent nature and most of them are carcinogenic and mutagenic. The key challenge in PAHs degradation is their hydrophobic nature, which makes them one of the most complex materials and inaccessible by a broad range of microorganisms. This bioavailability can be increased by using a biosurfactant. In the present study mixed PAHs were degraded using the biosurfactant producing bacterial strains. In addition, iron nanoparticles were synthesized and the impact of iron nanoparticles on the growth of the mixed bacterial strains (Pseudomonas stutzeri NA3 and Acinetobacter baumannii MN3) was optimized. The mixed PAHs (anthracene, pyrene, and benzo(a)pyrene) degradation was enhanced by addition of biosurfactant (produced by Bacillus subtilis A1) and iron nanoparticles, resulting in 85% of degradation efficiency. The addition of the biosurfactant increased the bioavailability of the PAHs in the aqueous environment, which might help bacterial cells for the initial settlement and development. The addition of iron nanoparticles increased both bacterial biomass and PAHs adsorption over their surface. These overall interactions assisted in the utilization of PAHs by the mixed bacterial consortia. This study illustrates that this integrated approach can be elaborated for the removal of the complex PAHs pollutants from soil and aqueous environments.

A Life Cycle Assessment of an Energy-Biochar Chain Involving a Gasification Plant in Italy

Life cycle assessment (LCA) is a fundamental tool for evaluating the environmental and energy load of a production cycle. Its application to renewable energy production systems offers the possibility of identifying the environmental benefits of such processes—especially those related to the by-products of production processes (i.e., digestion or biochar). Biochar has received worldwide interest because of its potential uses in bioenergy production, due to its coproducts (bio-oil and syngas), as well as in global warming mitigation, sustainable agriculture, pollutant removal, and other uses. Biochar production and use of soil is a strategy for carbon sequestration that could contribute to the reduction of emissions, providing simultaneous benefits to soil and opportunities for bioenergy generation. However, to confirm all of biochar’s benefits, it is necessary to characterize the environmental and energy loads of the production cycle. In this work, soil carbon sequestration, nitrous oxide emissions, use of fertilizers, and use of water for irrigation have been considered in the biochar’s LCA, where the latter is used as a soil conditioner. Primary data taken from experiments and prior studies, as well as open-source available databases, were combined to evaluate the environmental impacts of energy production from biomass, as well as the biochar life cycle, including pre- and post-conversion processes. From the found results, it can be deduced that the use of gasification production of energy and biochar is an attractive strategy for mitigating the environmental impacts analyzed here—especially climate change, with a net decrease of about −8.3 × 103 kg CO2 eq. Finally, this study highlighted strategic research developments that combine the specific characteristics of biochar and soil that need to be amended.

Unravelling the attributes of novel cyanobacteria Jacksonvillea sp. ISTCYN1 by draft genome sequencing

Filamentous cyanobacteria, Jacksonvillea sp. ISTCYN1 was isolated from agriculture field and cultured in BG-11 medium. This study, report the genome sequence of cyanobacteria Jacksonvillea thatto the best of our knowledgeis the firstgenome sequenceof thisgenus. The 5.7 MB draft genome sequence of this cyanobacterium contains 5134 protein-coding genes. The phylogenetic tree was constructed based on genome and Desertifilum sp. IPPAS B-1220 validated the closest relationship with Jacksonvillea sp. ISTCYN1. The growth of strain ISTCYN1 has been reported in the presence of different types of plastic when used as a sole carbon source. SEM analysis revealed biofilm formation by cyanobacterial strain ISTCYN1 on the surface of high and low-density polyethylene and polypropylene. In the presence of these plastics, EPS production has also been reported by this strain. Whole genome sequence analysis reveals the presence of many genes involved in biofilm formation. The presence of key enzymes responsible for plastic degradation laccase, esterase, lipase, thioesterase, and peroxidase have been predicted in the genome analysis. Genome analysis also provides insight into the genes involved in biotin biosynthetic pathways. Furthermore, the presence of many selenoproteins reveals the selenium acquisition by this cyanobacterium.

Construction of biotreatment platforms for aromatic hydrocarbons and their future perspectives

Aromatic hydrocarbons (AHCs) are one of the major environmental pollutants introduced from both natural and anthropogenic sources. Many AHCs are well known for their toxic, carcinogenic, and mutagenic impact on human health and ecological systems. Biodegradation is an eco-friendly and cost-effective option as microorganisms (e.g., bacteria, fungi, and algae) can efficiently breakdown or transform such pollutants into less harmful and simple metabolites (e.g., carbon dioxide (aerobic), methane (anaerobic), water, and inorganic salts). This paper is organized to offer a state-of-the-art review on the biodegradation of AHCs (monocyclic aromatic hydrocarbons (MAHs) and polycyclic aromatic hydrocarbons (PAHs)) and associated mechanisms. The recent progress in biological treatment using suspended and attached growth bioreactors for the biodegradation of AHCs is also discussed. In addition, various substrate growth and inhibition models are introduced along with the key factors governing their biodegradation kinetics. The growth and inhibition models have helped gain a better understanding of substrate inhibition in biodegradation. Techno-economic analysis (TEA) and life cycle assessment (LCA) aspects are also described to assess the technical, economical, and environmental impacts of the biological treatment system.

Assembly of fungal mycelium-carbon nanotube composites and their application in pyrene removal

Polycyclic aromatic hydrocarbons (PAHs) have been known for decades to threaten human health. Various physical, chemical and biological methods have been developed to remove PAHs from different matrices. Microbial biodegradation processes are thought to be effective and environmentally friendly, but the low bioavailability of PAHs and their slow removal rate often limit the application of biodegradation. In this study, novel self-assembled PAH-degrading fungal mycelium (Penicillium oxalicum SYJ-1)-carbon nanotube (CNT) composites were applied for pyrene removal. The addition of CNTs did not affect the growth of strain SYJ-1 and promoted the total PAH removal efficiency. The composite could completely remove pyrene at 20 mg L^-1 within 48 h, while the sole fungus and CNTs alone could only remove 72% and 80% of pyrene at 72 h, respectively. A cytochrome P450 inhibition experiment, together with degradation product identification and transcriptomic analysis, suggested that an intracellular PAH transformation pathway was employed by strain SYJ-1. The versatility of this assembly approach was also confirmed by adding different nanomaterials and using them to remove different pollutants. This study provides a strategy of coupling the chemical adsorption and biodegradation capacity of inorganic nanomaterials and microorganisms as composites to treat hydrophobic substrates in restricted bioreactor.