Multifunctional β-Cyclodextrin-EDTA-Chitosan polymer adsorbent synthesis for simultaneous removal of heavy metals and organic dyes from wastewater

Biopolymer‑carbonaceous composites, progress, and adsorptive mitigation of water pollutants

Chitin is the second most abundant natural biopolymer, which is composed of N-acetyl glucosamine units linked by β-(1 → 4) Chitosan is an N-deacetylated product of chitin. Properties of chitosan and chitin, such as biocompatibility, non-toxic nature, and biodegradability, make them successful alternatives for energy and environmental applications. However, their low mechanical properties, small surface area, reduced thermal properties, and greater pore volume restrict the potential for adsorption applications. Multiple investigations have demonstrated that these flaws can be prevented by fabricating chitosan and chitin with carbon-based composites. This review presents a comprehensive analysis of the fabrication of chitosan/chitin carbon-based materials. Furthermore, this review examines the prevalent technologies of functionalizing chitosan/chitin biopolymers and applications of chitin and chitosan as well as chitosan/chitin carbon-based composites, in various environmental fields (mitigating diverse water contaminants and developing biosensors). Also, the subsequent regeneration and reuse of adsorbents were also discussed. Finally, we summarize a concise overview of the difficulties and potential opportunities associated with the utilization of chitosan/chitin carbon-based composites as adsorbents to remove water contaminants.

Reconstructing Kaolinite Compounds for Remarkably Enhanced Adsorption of Congo Red

Organic dyes are widely used in many important areas, but they also bring many issues for water pollution. To address the above issues, a reconstructed kaolinite hybrid compound (γ-AlOOH@A-Kaol) was obtained from raw kaolinite (Kaol) in this work. The product was then characterized by X-ray diffraction (XRD), Fourier-transform infrared (ATR-FTIR), Brunauer-Emmett-Teller (BET), and scanning electron microscopy (SEM), and the absorption properties of γ-AlOOH@A-Kaol for congo red were further studied. The results demonstrated that flower-like γ-AlOOH with nanolamellae were uniformly loaded on the surface of acid-treated Kaol with a porous structure (A-Kaol). In addition, the surface area (36.5 m2/g), pore volume (0.146 cm3/g), and pore size (13.0 nm) of γ-AlOOH@A-Kaol were different from those of A-Kaol (127.4 m2/g, 0.127 cm3/g, and 4.28 nm, respectively) and γ-AlOOH (34.1 m2/g, 0.315 cm3/g, and 21.5 nm, respectively). The unique structure could significantly enhance the sorption capacity for congo red, which could exceed 1000 mg/g. The reasons may be ascribed to the abundant groups of -OH, large specific surface area, and porous structure of γ-AlOOH@A-Kaol. This work provides an efficient route for comprehensive utilization and production of Kaol-based compound materials that could be used in the field of environmental conservation.

Selective removal of Hg(II) by chitosan derivative covalently modified with double cross-linking agents abundant in N and S atoms

With rapid industrialization and urbanization, numerous wastewater contains elevated concentration of Hg(II), and its concentration must be reduced to the discharge limit, so as not to cause serious pollution to the environment. In this paper, a modified chitosan adsorbent material, AMT-DMTD-CS (CS = chitosan, AMT = 2-amino-5-mercapto-1,3,4-thiadiazole, DMTD = 1,3,4-thiadiazole-2,5-dithiol) was prepared. FT-IR, XPS, elemental analysis, and FE-SEM confirmed that AMT and DMTD were successfully grafted covalently onto CS, with BET analysis showing a specific surface area of 105.55 m2/g for AMT-DMTD-CS. Adsorption study suggests that the optimal pH environment for AMT-DMTD-CS to adsorb Hg(II) is 4.0, and the saturated uptake capacity reaches 687.17 mg/g at 318 K, even after eight regenerations, the removal is still maintained at 80.06 %. Moreover, the adsorption behavior is in perfect agreement with the pseudo-second order kinetic model and the Langmuir isotherm model. In addition, AMT-DMTD-CS shows quite favorable selectivity for Hg(II) in a variety of co-existing metal ions. According to the FT-IR and XPS analysis of AMT-DMTD-CS-Hg(II), the synergistic complexation of -OH, -NH2, -NH, CN, CS and -SH to Hg(II) is considered as the main reason that leading to the elevated adsorption capacity.

Adsorptive removal of anthracene from water by biochar derived amphiphilic carbon dots decorated with chitosan

Anthracene belongs to the polycyclic aromatic hydrocarbon (PAH) consisting of benzene rings, unusually highly stable through more π-electrons and localized π-bond in entire rings. Aqueous-phase anthracene adsorption using carbon-based materials such as biochar is ineffective. In this paper, carbon dots (CDs) derived from the acid treatment of coconut shell biochar (CDs/MCSB) decorated with chitosan (CS) are successfully synthesized and applied for anthracene removal from aqueous solutions. The h-CDs/MCSB exhibited fast adsorption of anthracene with significant sorption capacity (Qmax = 49.26 mg g-1) with 95 % removal efficiency at 60 min. The study suggested chemisorption dominated monolayer anthracene adsorption onto h-CDs/MCSB, where a significant role was played by ion-exchange. Density Functional Theory (DFT) suggested the anthracene adsorption was dominated by the electrostatic interactions and delocalized electron, induced by higher polarizability of functional groups on the surface of hybrid CDs/MCSB assisted by chitosan (h-CDs/MCSB). In addition, the aromatic structure of CDs/MCSB and high polarizability of functional groups provided the strong interactions between benzene rings of anthracene and hybrid adsorbent-assisted multiple π-bond through delocalized π-bond and polarization-induced H-bond interactions. The presence of carboxylic and sulfonic groups on the CDs/MCSB surface also contributed to the effective adsorption of anthracene was confirmed by the fluorescence spectra. The results showed that the hybrid adsorbent was an effective material for removing PAHs, usually difficult to remove from water owing to the presence of benzene rings in their structures. Further, consistency in the DFT results suggested the outstanding binding capacity with the anthracene molecules with h-CDs/MCSB.

Adsorption of Cd(II) ions on magnetic graphene oxide/cellulose modified with β-cyclodextrin: Analytical interpretation via statistical physics modeling and fractal like kinetic approach

In the present study, β-cyclodextrin modified magnetic graphene oxide/cellulose (CN/IGO/Cel) was fabricated for removal of Cd(II) ions. The material was characterized through various analytical techniques like FTIR, XRD, TGA/DTA, SEM, TEM, and XPS. The point of zero charge of the material was obtained as 5.38. The controllable factors were optimized by Taguchi design and optimum values were: adsorbent dose-16 mg, equilibrium time-40 min, and initial concentration of Cd(II) ions-40 mg/L. The material shows high adsorption capacity (303.98 mg/g). The good fitting of Langmuir model to adsorption data (R2 = 0.9918-0.9936) revealed the monolayer coverage on adsorbent surface. Statistical physics model M 2 showed best fitting to adsorption data (R2 > 0.997), suggesting the binding of Cd(II) ions occurred on two different receptor sites (n). Stereographically n > 1 confirming vertical multi-molecular mechanisms of Cd(II) ions adsorption on CN/IGO/Cel surface. The adsorption energies (E1 = 23.71-28.95 kJ/mol; E2 = 22.69-29.38 kJ/mol) concluded the involvement of physical forces for Cd(II) ions adsorption. Kinetic data fitted well to fractal-like pseudo first-order model (R2 > 0.9952), concluding the adsorption of Cd(II) ions occurred on energetically heterogeneous surface. The kinetic analysis shows that both the film-diffusion and pore-diffusion were responsible for Cd(II) ions uptake. XPS analysis was utilized to explain the adsorption mechanism of Cd(II) ions onto CN/IGO/Cel.

β-cyclodextrin polymer composites for the removal of pharmaceutical substances, endocrine disruptor chemicals, and dyes from aqueous solution- A review of recent trends

Cyclodextrin (CD) and its derivatives are receiving attention as a new-generation adsorbent for water pollution treatment due to their external hydrophilic and internal hydrophobic properties. Among types of CD, β-Cyclodextrin (βCD) has been a material of choice with a proven track record for a range of utilities in distinct domains, owing to its unique cage-like structural conformations and inclusion complex-forming ability, especially to mitigate emerging contaminants (ECs). This article outlines βCD composites in developing approaches of their melds and composites for purposes such as membranes for removal of the ECs in aqueous setups have been explored with emphasis on recent trends. Electrospinning has bestowed an entirely different viewpoint on polymeric materials, comprising βCD, in the framework of diverse functions across a multitude of niches. Besides, this article especially discusses βCD polymer composite membrane-based removal of contaminants such as pharmaceutical substances, endocrine disruptors chemicals, and dyes. Finally, in this article, the challenges and future directions of βCD-based adsorbents are discussed, which may shed light on pragmatic commercial applications of βCD polymer composite membranes.

Upgraded β-cyclodextrin-based broad-spectrum adsorbents with enhanced antibacterial property for high-efficient dyeing wastewater remediation

The dyeing wastewater contains amounts of refractory organic compounds, and severely endangers the ecosystem and human health. To alleviate this problem, in this study, the low-cost broad-spectrum nano-adsorbent (denoted as CD/CA-g-CS) with strong antibacterial activity has been synthesized by chemical binding of β-cyclodextrin (β-CD) with chitosan (CS) and citric acid (CA) for high-efficient dyes scavenger. Taking advantage of the extraordinary water insolubility, porous nature and abundant surface groups, the synthesized CD/CA-g-CS outperforms the previously reported adsorbents in terms of adsorption performance. The CD/CA-g-CS exhibits ultrahigh adsorption capacities of 801.66, 770.50 and 946.66 mg/g, respectively mg/g for the cationic dyes of malachite green (MG), basic red (BR) and methylene blue (MB), respectively, while 389.64, 619.60 and 429.22 mg/g for the anionic dyes of acid blue (AB), acid red (AR) and acid yellow (AY), respectively. The chemical monolayer absorption is further demonstrated by the analysis based on the pseudo-second-order adsorption kinetics and Langmuir isotherm models. The regenerable CD/CA-g-CS not only performs well in one-step removal of the mixed dyes in the simulated sewage, but also exhibits superior performance in purifying real industrial wastewater. Moreover, CD/CA-g-CS endowed with antibacterial activity leads to an inhibition rate of over 99.99 % for E. coli. The newly developed CD/CA-g-CS adsorbents are highly promising for high-efficient dyeing wastewater remediation.

Highly effective removal of multi-heavy metals from simulated industrial effluent through an adsorption process employing carboxymethyl-chitosan composites

Monochloroacetic acid precursor-based carboxymethyl chitosan resins were prepared using the chitosan with variant molecular weight. The carboxymethylation assured enhanced active sites on the resin surface, acidic media stability, and henceforth its appropriate constitution to facilitate enhanced multi-heavy metal adsorption-desorption and subsequent regeneration potential. Zn, Pb, and Fe multimetal adsorption properties were investigated. Thereby, kinetic and equilibrium models were sought for their fitness to represent heavy metal sorption data with the preferred complex adsorbate system. The adsorbate system complexity and its constituent co-existing cations significantly influence the sorption characteristics of the mentioned multi-heavy metal ions. The optimal adsorption capabilities for Zn, Pb, and Fe were 238.10 mg g-1, 4.78 mg g-1, and 147.06 mg g-1, respectively. Low-cost acid-base solutions were also considered for the effective regeneration of the resin even after three adsorption-desorption cycles. Prominent findings of the work assured excellent functionality of the carboxymethyl-chitosan resin for the simultaneous lead, iron, and zinc ion elimination from mimicking real-world effluent systems.

Exploration of the Conformational Scenario for α-, β-, and γ-Cyclodextrins in Dry and Wet Conditions, from Monomers to Crystal Structures: A Quantum-Mechanical Study

Cyclodextrins (CDs) constitute a class of cyclic oligosaccharides that are well recognized and largely applied in the drug delivery field, thanks to their biocompatibility, low cost, and the possibility to be derivatized in order to tune and optimize the complexation/release of the specific drug. The conformational flexibility of these systems is one of their key properties and requires a cost-effective methodology to be studied by combining the accuracy of results with the possibility of exploring a large set of conformations. In the present paper, we have explored the conformational potential energy surface of the monomers and dimers of α-, β-, and γ-cyclodextrins (i.e., 6, 7, and 8 monomeric units, respectively) by means of fast but accurate semiempirical methods, which are then refined by state-of-the-art DFT functionals. Moreover, the crystal structure is considered for a more suitable comparison with the IR spectrum experimentally recorded. Calculations are carried out in the gas phase and in water environments, applying both implicit and explicit treatments. We show that the conformation of the studied molecules changes from the gas phase to the water, even if treated implicitly, thus modifying their complexation capability.

Bio-oil and biochar production from Ageratum conyzoides using triple-stage hydrothermal liquefaction and utilization of biochar in removal of multiple heavy metals from water

Production of low-cost biomass and its utilization for producing cost effective and eco-friendly bioenergy as well as for removing heavy metals from water can be explored as an approach to meet the sustainable development goals. In light of the above-mentioned study, hydrothermal liquefaction (HTL) of Billy goat weed (BGW; Ageratum conyzoides) was carried out to produce bio-oil. In addition, the residual biochar from the HTL process was activated to obtain Act-BC and was further modified to produce MnO2-loaded biochar (Act-BC@MnO2-25%). The HTL of BGW was done at three different temperatures, i.e., 250 °C, 350 °C and 450 °C in a high-pressure batch reactor to maximize the bio-oil yield. Also, two different HTL methods i.e., single-stage HTL and triple-stage HTL of BGW were compared and discussed in detail. The bio-oil obtained via the triple-stage HTL was rich in carbon, hydrogen, and nitrogen. It also showed a higher heating value (HHV) and bio-oil yield (46%) than the single-stage. The residual biochar obtained at 450 °C (Act-BC) and MnO2 modified (Act-BC@MnO2-25%) were then tested to adsorb multiple heavy metal (i.e., Pb(II), Cd(II), Cu(II), and Ni(II)) from water. The kinetics data obtained from the adsorption experiment with Act-BC@MnO2-25% were well fitted to PSO kinetics model. The isotherm data were well aligned with the Langmuir model; the adsorption capacity of Act-BC@MnO2-25% was estimated to be 198.70 ± 11.40 mg g-1, 93.70 ± 6.60 mg g-1, 78.90 ± 7.20 mg g-1 and 30.50 ± 2.10 mg g-1 for Pb(II), Cd(II), Cu(II), and Ni(II), respectively. Furthermore, Act-BC@MnO2-25% remained active for metal ions absorption even after six consecutive uses. The result obtained from this study clearly demonstrates that the triple-stage HTL of BGW is a promising technology to achieve both remediation of metal-contaminated water and production of bioenergy.

Mechanochemical synthesis of cysteine-gum acacia intermolecular complex for multiple metal(loid) sequestration from herbal extracts

The ubiquitous heavy metal(loid)s (HMs) contamination has triggered great concern about food safety, while sequestration and separation of trace HMs from herbal extracts still calls for appropriate sorbent materials. In this work, gum acacia was modified by cysteine to form a cysteine-acacia intermolecular complex (Cys-GA complex) via facile mechanochemical synthesis, aiming at capturing multiple HMs simultaneously. Preliminary screening confirms the superiority of Cys-CA complex for both cationic and anionic HMs, and determines an optimum Cys/GA mass ratio of 9:1 to achieve high removal capacities for Pb(II) (938 mg g-1), Cd(II) (834 mg g-1), As(V) (496 mg g-1), and Cr(VI) (647 mg g-1) in simulated aqueous solution. The analysis on HMs-exhausted Cys-GA complex indicates that Pb(II), As(V), and Cr(VI) tend to be removed through chelation, electrostatic attraction, and reduction, while Cd(II) can only be chelated or adsorbed by electrostatic interaction. The batch experiments on commercial herbal (e.g. Panax ginseng, Glycine max, Sophora flavescens, Gardenia jasminoides, Cyclocarya paliurus, and Bamboo leaf) extracts indicate that Cys-GA complex can reduce HMs concentration to attain acceptable level that comply with International Organization for Standardization, with negligible negative effect on its active ingredients. This work provides a practical and convenient strategy to purify HMs-contaminated foods without introducing secondary pollution.

β-Cyclodextrin network crosslinked by novel phosphonium-based tetrakiscarboxylic acid derived from PH3 tail gas: Synthesis and application for rapid removal of organic dyes from wastewater

Organic dyes, such as methyl orange (MO), Congo red (CR), crystal violet (CV) and methylene blue (MB), are common organic pollutants existing in wastewater. Therefore, the exploration of bio-based adsorbents for the efficient removal of organic dyes from wastewater has gained many attentions. Here, we report a PCl₃-free synthetic method for the synthesis of phosphonium-containing polymers, in which the prepared tetrakis(2-carboxyethyl) phosphonium chloride-crosslinked β-cyclodextrin (TCPC-β-CD) polymers were applied to the removal of dyes from water. The effects of contact time, pH (1-11), and dye concentration were investigated. The selected dye molecules could be captured by the host-gest inclusion of β-CD cavities, and the phosphonium and carboxyl groups in the polymer structure would respectively facilitate the removal of cationic dyes (MB and CV) and anionic dyes (MO and CR) via electrostatic interactions. In a mono-component system, over 99 % of MB could be removed from water within the first 10 min. Based on the Langmuir model, the calculated maximum adsorption capacities of MO, CR, MB, and CV were 180.43, 426.34, 306.57, and 470.11 mg/g (or 0.55, 0.61, 0.96 and 1.15 mmol/g), respectively. Additionally, TCPC-β-CD was easily regenerated using 1 % HCl in ethanol, and the regenerative adsorbent still showed high removal capacities for MO, CR, and MB even after seven treatment cycles.

Recent Advances in Nanocellulose Aerogels for Efficient Heavy Metal and Dye Removal

Water pollution is a significant environmental issue that has emerged because of industrial and economic growth. Human activities such as industrial, agricultural, and technological practices have increased the levels of pollutants in the environment, causing harm to both the environment and public health. Dyes and heavy metals are major contributors to water pollution. Organic dyes are a major concern because of their stability in water and their potential to absorb sunlight, increasing the temperature and disrupting the ecological balance. The presence of heavy metals in the production of textile dyes adds to the toxicity of the wastewater. Heavy metals are a global issue that can harm both human health and the environment and are mainly caused by urbanization and industrialization. To address this issue, researchers have focused on developing effective water treatment procedures, including adsorption, precipitation, and filtration. Among these methods, adsorption is a simple, efficient, and cheap method for removing organic dyes from water. Aerogels have shown potential as a promising adsorbent material because of their low density, high porosity, high surface area, low thermal and electrical conductivity, and ability to respond to external stimuli. Biomaterials such as cellulose, starch, chitosan, chitin, carrageenan, and graphene have been extensively studied for the production of sustainable aerogels for water treatment. Cellulose, which is abundant in nature, has received significant attention in recent years. This review highlights the potential of cellulose-based aerogels as a sustainable and efficient material for removing dyes and heavy metals from water during the treatment process.

Peroxymonosulfate activation by graphene oxide-supported 3D-MoS2/FeCo2O4 sponge for highly efficient organic pollutants degradation

To address conventional powder catalysts' recovery and aggregation issues that greatly restrain their practical application, a recoverable graphene oxide (GO)-supported 3D-MoS₂/FeCo₂O₄ sponge (SFCMG) was developed through a simple impregnation pyrolysis method. SFCMG can efficiently activate peroxymonosulfate (PMS) to produce reactive species for rapid degradation of rhodamine B (RhB), with 95.0% and 100% of RhB being removed within 2 min and 10 min, respectively. The presence of GO enhances the electron transfer performance of the sponge, and the three-dimensional melamine sponge serves as a substrate to provide a highly dispersed carrier for FeCo₂O₄ and MoS₂/GO hybrid sheets. SFCMG exhibits a synergistic catalytic effect of Fe and Co, and facilitates the redox cycles of Fe(III)/Fe(II) and Co(III)/Co(II) by MoS₂ co-catalysis, which enhances its catalytic activity. Electron paramagnetic resonance results demonstrate that SO₄^•-, ·O₂^- and ¹O₂ are all involved in SFCMG/PMS system, and ¹O₂ played a prominent role in RhB degradation. The system has good resistance to anions (Cl^-, SO₄^2-, and H₂PO₄^-) and humic acid and excellent performance for many typical contaminants degradation. Additionally, it works efficiently over a wide pH range (3-9) and possesses high stability and reusability with the metal leaching far below the safety standards. The present study extends the practical application of metal co-catalysis and offers a promising Fenton-like catalyst for the treatment of organic wastewater.

Antimony and naphthalene can be simultaneously leached from a combined contaminated soil using carboxymethyl-β-cyclodextrin as a biodegradable eluant

In this study, we have investigated the removal efficiency of antimony (Sb) and naphthalene (Nap) from a combined contaminated soil by carboxymethyl-β-cyclodextrin (CMCD) leaching and reveal its remediation mechanisms by FTIR and ¹H NMR analyses. The results show that the highest removal efficiencies of Sb and Nap were 94.82% and 93.59%, respectively, with a CMCD concentration of 15 g L^-1 at a pH of 4 and a leaching rate of 2.00 mL min^-1 over an interval-time of 12 h. The breakthrough curves show that CMCD had a stronger inclusion capacity of Nap than Sb, and Sb could enhance the adsorption capacity of Nap, while Nap weakened the adsorption of Sb during CMCD leaching. Furthermore, the FTIR analysis suggests that the removal of Sb from combined contaminated soil involved complexation with the carboxyl and hydroxyl groups on CMCD, and the NMR analysis suggests that the inclusion of Nap occurred. These results indicate that CMCD is a good eluant for remediating soil contaminated by a combination of heavy metals and polycyclic aromatic hydrocarbons (PAHs), and its remediation mechanisms depend on the complexation reactions between the surface functional groups and inclusion reactions in the internal cavities.

Preparation of Chitosan/β-Cyclodextrin Composite Membrane and Its Adsorption Mechanism for Proteins

A significant portion of the protein in food waste will contaminate the water. The chitosan/modified β-cyclodextrin (CS/β-CDP) composite membranes were prepared for the adsorption of bovine serum albumin (BSA) in this work to solve the problem of poor adsorption protein performance and easy disintegration by a pure chitosan membrane. A thorough investigation was conducted into the effects of the preparation conditions (the mass ratio of CS and β-CDP, preparation temperature, and glutaraldehyde addition) and adsorption conditions (temperature and pH) on the created CS/β-CDP composite membrane. The physical and chemical properties of pure CS membrane and CS/β-CDP composite membrane were investigated. The results showed that CS/β-CDP composite membrane has better tensile strength, elongation at break, Young's modulus, contact angle properties, and lower swelling degree. The physicochemical and morphological attributes of composite membranes before and after the adsorption of BSA were characterized by SEM, FT-IR, and XRD. The results showed that the CS/β-CDP composite membrane adsorbed BSA by both physical and chemical mechanisms, and the adsorption isotherm, kinetics, and thermodynamic experiments further confirmed its adsorption mechanism. As a result, the CS/β-CDP composite membrane of absorbing BSA was successfully fabricated, demonstrating the potential application prospect in environmental protection.

Effective remediation of Pb2+ polluted environment by adsorption onto recyclable hydroxyl bearing covalent organic framework

The removal of heavy metal ions from wastewater has attracted considerable interest because of their toxicity. Adsorption is one of the most promising methods for the removal of heavy metal ions due to its simplicity and effectiveness. Recently, covalent organic frameworks (COFs) have become promising adsorbents for effective wastewater remediation. However, many building blocks have been developed, and the design of COFs with high adsorption efficiency remains a challenge. Here, a covalent organic framework (DHTP-TPB COF) decorated with hydroxyl groups was developed for the efficient removal of Pb²⁺ ions. The DHTP-TPB COF showed excellent performance in adsorbing Pb²⁺ from aqueous solution. More importantly, DHTP-TPB COF exhibited high selectivity for Pb²⁺ compared to other competing ions, capturing Pb²⁺ ions with a removal efficiency of over 96% at pH 4. The results show that the DHTP-TPB COF exhibits excellent adsorption capacity at pH 4 of up to 154.3 mg/g for Pb²⁺ ions; the value is comparable to many previously reported COFs. Moreover, the adsorbed Pb²⁺ ions could be easily eluted with a 0.1 M EDTA solution, and the DHTP-TPB COF can be reused for more than five adsorption-desorption cycles without significant loss of adsorption capacity. Moreover, the adsorption mechanism was revealed using XPS analysis, indicating the formation of strong coordination-bonding interactions between hydroxyl and Pb²⁺ ions. Therefore, the DHTP-TPB COF prepared herein has high potential for the treatment of Pb²⁺-contaminated wastewater and is promising for the adsorption of Pb²⁺ ions in practical applications.

Chitosan cross-linked β-cyclodextrin polymeric adsorbent for the removal of perfluorobutanesulfonate from aqueous solution: adsorption kinetics, isotherm, and mechanism

The existence of per- and polyfluoroalkyl substances (PFASs) in water is of serious interest due to their toxic, bioaccumulative, and persistent nature, and adsorption is an effective approach for the PFASs removal. In the present study, we developed a polymeric adsorbent by cross-linking chitosan and β-cyclodextrin using glutaraldehyde (Chi-Glu-β-CD) and evaluated its removal performance for perfluorobutanesulfonate (PFBS) from water. The results indicate that the performance was highly affected by solution pH; under a more acidic condition (e.g., pH 2.0), a higher removal efficiency was detected, and faster adsorption kinetics was observed with the rate constant (k₂) of 0.001 ± 3×10^-4 g mg^-1 min^-1. Adsorption isotherm data agreed to the Sips model with a maximum heterogeneous adsorption capacity of 135.70 ± 25.70 mg g^-1, probably due to protonated amine (NH⁺) and electron-deficient β-CD cavities. The adsorption mechanism was confirmed using energy dispersive X-ray and Fourier transform infrared (FTIR) spectroscopy, showing the role of electrostatic attractions between the protonated amine and the negatively charged PFBS molecule (especially, with sulfonate side (N-H--O-S)) and host-guest inclusion formations with β-CD cavity in adsorption. Additionally, the synthesized adsorbent was recovered using methanol without any significant decline in adsorption efficiency even after four continuous adsorption/desorption cycles. All these findings suggested that the Chi-Glu-β-CD composite could be a promising adsorbent in the removal of PFBS from water.

Efficient and recyclable degradation of organic dye pollutants by CeO2@ZIF-8 nanozyme-based non-photocatalytic system

Advanced oxidation processes-based catalysis system as the most typical pollutant degradation technology always suffer from poor durability and photo-dependent. Inspired by the fact that some nanomaterials exhibit catalytic properties closer to natural enzymes, a high peroxidase-like activity and stability CeO₂@ZIF-8 nanozyme was synthesized in this study for non-photodegradation of dyes pollution. Multiple characterization techniques were applied to prove the successful synthesis of the nanozyme. The influence of different parameters on the catalytic degradation of organic dye by nanozyme was investigated. This nanozyme achieved a maximum degradation efficiency of 99.81% for methyl orange and maintained its catalytic performance in repeated experiments. Possible degradation intermediates and pathways for methyl orange were then proposed. In addition, the CeO₂@ZIF-8 loaded starch/agarose films were prepared for the portable and recyclable remediation of real dye wastewater, which maintained more than 80% degradation efficiency after 5 successive cycles. These results suggested that nanozyme based non-photocatalytic system is a potential catalyst for dye degradation and it opens a new avenue to develop high-performance and recyclable catalysts for pollutant remediation.

Versatile crosslinking synthesis of an EDTA-modified UiO-66-NH2/cotton fabric composite for simultaneous capture of heavy metals and dyes and efficient degradation of organophosphate

The metal-organic frameworks/cotton fabric composites (MOFs/CFCs) have emerged as a new type of prospective materials for environmental cleanup, due to their convenient recyclability and high removal efficiency towards hazardous pollutants. However, their practical applications are limited by complicated synthetic conditions, insufficient interface bonding and poor adsorption capacity. Herein, for the first time, a robust ethylenediaminetetraacetic acid (EDTA)-functionalized MOFs/CFC is prepared based on UiO-66-NH₂ crystals by using EDTA dianhydride as the cross-linking agent, and applied for simultaneous removal of heavy metals and dyes, as well as degradation of chemical warfare agents. The as-prepared EDTA-UiO-66-NH₂/CFC shows extraordinary monocomponent adsorption performance with maximum adsorption capacity of 158.7, 126.2, 131.5, 117.4 and 104.5 mg/g for Cd(II), Cu(II), methylene blue, crystal violet and safranin O, respectively. Interestingly, in metal-dyes binary system, the uptake of Cu(II) by EDTA-UiO-66-NH₂/CFC increases significantly when co-existing high concentration of dyes. The results indicate that the synergistic and simultaneous removal of both dyes and metal from complex systems can be realized by EDTA-UiO-66-NH₂/CFC via multiple mechanisms. The EDTA-UiO-66-NH₂/CFC also exhibits an outstanding catalytic performance for degrading dimethyl 4-nitrophenylphosphate. Besides, it can be reused for several times without obvious decrease of its adsorption and catalysis efficiencies. More impressively, the cross-linking reaction approach can not only anchor UiO-66-NH₂ crystals firmly onto cotton fabric, but also facilitate in-situ formation of abundant adsorption sties on the adsorbent surface. Therefore, this work offers a simple and versatile synthetic strategy to develop high-performance environmental material for multiple pollutants remediation.

Recent advancements in engineered biopolymeric-nanohybrids: A greener approach for adsorptive-remediation of noxious metals from aqueous matrices

Industrial wastewater is causing serious health problems due to presence of large concentrations of toxic metals. Removal of these metals is still a big challenge using pristine natural biopolymers due to their low surface area, water solubility, and poor recovery. Developing biopolymeric composites with other materials has attained attention because they possess a high surface area and structural porosity, high reactivity, and less water solubility. In simple words, biopolymeric nanohybrids have great adsorption capacity for heavy metals. Biopolymeric materials are abundant, low cost, biodegradable, and possess different functional moieties (carboxyl, amine, hydroxyl, and carbonyl) which play a vital role to adsorb metal ions through various inter-linkages (i.e., electrostatic, hydrogen bonding, ion exchange, chelation, etc.). Biopolymeric nanohybrids have been proven a potent tool in environmental remediation such as the abatement of heavy metal ions from polluted water. Herein, we have reported the adsorption potential of various biopolymers (cellulose, chitosan, pectin, gelatin, and silk proteins) for the removal of heavy metals. This review discusses the suitability of biopolymeric nanohybrids as an adsorbent for heavy metals, their synthesis, modification, adsorption potential, and adsorption mechanism along with best fitted thermodynamic and kinetic models. The influence of pH, contact time, and adsorbent dose on adsorption potential has also been discussed in detail. Lastly, the challenges, research gaps and recommendations have been presented. This review concludes that biopolymers in combination with other materials such as metal-based nanoparticles, clay, and carbon-based materials are excellent materials to remove metallic ions from wastewater. Significant adsorption of heavy metals was obtained at a moderate pH (5-6). Contact time and adsorbent dose also affect the adsorption of heavy metals in certain ways. The Pseudo-first order model fits the data for the initial period of the first step of the reaction. Kinetic studies of different adsorption processes of various biopolymeric nanohybrids described that for majority of bionanohybrids, Pseudo-second order fitted the experimental data very well. Functionalized biopolymeric nanohybrids being biodegradable, environment friendly, cost-effective materials have great potential to adsorb heavy metal ions. These may be the future materials for environmental remediation.

Adsorption studies of the hybrid material obtained from the functionalization of silica with alfa and gamma cyclodextrins

The generation of residues containing dyes by industrial sectors has been mobilizing scientists to develop methodologies capable of treating water containing these contaminants. Adsorption is an option to remove these molecules from the aqueous medium and, for this study, the composites between silica and cyclodextrins alpha (α-CDSI) and gamma (γ-CDSI) were used to capture methylene blue. Adsorption was spontaneous for both composites (ΔG < 0) and characterized as exothermic and of a physical nature, with ΔH of -17.68 and -12.13 kJ mol^-1 for α-CDSI and γ-CDSI, respectively. Adsorption took place over a wide pH range, with an efficiency of approximately 96%, reaching equilibrium at 5 minutes. The adsorption kinetics was described by the pseudo-second-order model (R² > 0.999) and the adsorption isotherms showed that the process must occur mainly by dye complexation in the cyclodextrins cavities. The q_m values obtained were 210.8 and 205.2 mg g^-1 for α-CDSI and γ-CDSI, respectively; the Sips and Temkin models were the ones that best fit the experimental data. The deposition and interactions of the dye with the adsorbent surface were confirmed by the analysis of the IR spectra. Desorption studies showed that the material maintained its adsorption capacity of around 90% until the fourth adsorption/desorption cycle. Thus, the materials produced showed to efficiently remove methylene blue and that composite reuse is a viable process for application in dye removal.

Enhanced photocatalytic activity of novel Canthium coromandelicum leaves based copper oxide nanoparticles for the degradation of textile dyes

The present study focused to synthesize the copper oxide nanoparticles (CuONPs) using novel Canthium coromandelicum leaves in a cost-effective, easy, and sustainable approach. The obtained Canthium coromandelicum-copper oxide nanoparticles (CC-CuONPs) were characterized using UV-Visible spectroscopy, FT-IR analysis, FESEM, HR-TEM imaging, and XRD study. The XRD pattern verified the development of crystalline CC-CuONPs with an average size of 33 nm. The biosynthesized CC-CuONPs were roughly spherical, according to HR-TEM and FESEM analyses. FT-IR research verified the existence of functional groups involved in CC-CuONPs production. Cu and O₂ have high-energy signals of 78.32% and 12.78%, respectively, according to data from EDX. The photocatalytic evaluation showed that synthesized CC-CuONPs have the efficiency of degrading methylene blue (MB) and methyl orange (MO) by 91.32%, 89.35% respectively. The findings showed that biosynthesized CC-CuONPs might effectively remove contaminants in an environmentally acceptable manner.

Simultaneous capturing of mixed contaminants from wastewater using novel one-pot chitosan functionalized with EDTA and graphene oxide adsorbent

The emergence of inorganic and organic contaminants has raised great concerns owing to their adverse impact on human health and ecological security. Herein, first time one-pot process was applied for chitosan (CS) functionalization using graphene oxide (GO) and ethylenediaminetetraacetic acid (EDTA) for simultaneous capturing of toxic inorganic (lead (Pb²⁺) and cadmium (Cd²⁺)) and organic (ciprofloxacin (CIP) and sildenafil (SDF)) contaminants from wastewater. In this approach, we believe that CS would work as a backbone, GO would capture both inorganic and organic contaminants via electrostatic interactions, while EDTA would make complexation with heavy metals. Various parameters including pH, reaction time, concentration, reusability etc. were evaluated to achieve the best experimental result in monocomponent system. The prepared adsorbent displayed an excellent monolayer adsorption capacity of 351.20 and 264.10 mg g^-1 for Pb²⁺ and Cd²⁺, respectively, while a heterogeneous sorption capacity of 75.40 and 40.90 mg g^-1 for CIP and SDF, respectively. The kinetics data fitted well to Pseudo-second order (PSO) kinetics model for both types of contaminants and gave faster interaction towards metal ions (higher k₂) than organic contaminants. Experimental results showed excellent adsorption efficiencies at environmental levels in the capturing of both inorganic and organic contaminants at the same time from polluted water. The capturing mechanism of both types of contaminants was explained by elemental mapping, EDS, and FT-IR spectra. Overall, easy synthesis, excellent capturing capacity, and reusability imply that the prepared adsorbent has a sufficient potential for the treatment of co-existing toxic contaminants in water.

Methacrylate-Based Polymeric Sorbents for Recovery of Metals from Aqueous Solutions

The industrialization and urbanization expansion have increased the demand for precious and rare earth elements (REEs). In addition, environmental concerns regarding the toxic effects of heavy metals on living organisms imposed an urgent need for efficient methods for their removal from wastewaters and aqueous solutions. The most efficient technique for metal ions removal from wastewaters is adsorption due to its reversibility and high efficiency. Numerous adsorbents were mentioned as possible metal ions adsorbents in the literature. Chelating polymer ligands (CPLs) with adaptable surface chemistry, high affinity towards targeted metal ions, high capacity, fast kinetics, chemically stable, and reusable are especially attractive. This review is focused on methacrylate-based magnetic and non-magnetic porous sorbents. Special attention was devoted to amino-modified glycidyl methacrylate (GMA) copolymers. Main adsorption parameters, kinetic models, adsorption isotherms, thermodynamics of the adsorption process, as well as regeneration of the polymeric sorbents were discussed.

Aminopolycarboxylic Acids-Functionalized Chitosan-Based Composite Cryogels as Valuable Heavy Metal Ions Sorbents: Fixed-Bed Column Studies and Theoretical Analysis

Over the years, a large number of sorption experiments using the aminopolycarboxylic acid (APCA)-functionalized adsorbents were carried out in batch conditions, but prospective research should also be directed towards column studies to check their industrial/commercial feasibility. In this context, sorption studies of five-component heavy metal ion (HMI) solutions containing Zn2+, Pb2+, Cd2+, Ni2+, and Co2+ in equimolar concentrations were assessed in fixed-bed columns using some APCA-functionalized chitosan-clinoptilolite (CS-CPL) cryogel sorbents in comparison to unmodified composite materials. The overall sorption tendency of the APCA-functionalized composite sorbents followed the sequence Co2+ < Zn2+ < Cd2+ ≤ Pb2+ < Ni2+, meaning that Co2+ ions had the lowest affinity for the sorbent’s functional groups, whereas the Ni2+ ions were strongly and preferentially adsorbed. To get more insights into the application of the composite microbeads into continuous flow set-up, the kinetic data were described by Thomas and Yoon−Nelson models. A maximum theoretical HMI sorption capacity of 145.55 mg/g and a 50% breakthrough time of 121.5 min were estimated for the column containing CSEDTA-CPL cryogel sorbents; both values were much higher than those obtained for the column filled with pristine CS-CPL sorbents. In addition, desorption of HMIs from the composite microbeads in dynamic conditions was successfully achieved using 0.1 M HCl aqueous solution. Moreover, a theoretical analysis of APCA structures attached to composite adsorbents and their spatial structures within the complex combinations with transition metals was systematically performed. Starting from the most stable conformer of EDTA, coordinative combinations with HMIs can be obtained with an energy consumption of only 1 kcal/mole, which is enough to shift the spatial structure into a favorable conformation for HMI chelation.

Cyclodextrins inclusion complex: Preparation methods, analytical techniques and food industry applications

This review offers a vision of the chemical behaviour of natural ingredients, synthetic drugs and other related compounds complexed using cyclodextrins. The review takes care of different sections related to i) the inclusion complexes formation with cyclodextrins, ii) the determination of the inclusion formation constant, iii) the most used methods to prepare host inclusion in the non-polar cavity of cyclodextrins and iv) the analytical techniques to evidence host inclusion. The review provides different literature that shows the application of cyclodextrins to improve physical, chemical, and biological characteristics of food compounds including solubility, stability and their elimination/masking. Moreover, the review also offers examples of commercial food/supplement products of cyclodextrins to indicate that cyclodextrins can be used to generate biotechnological substances with innovative properties and improve the development of food products.

Simultaneous Removal of Heavy Metals and Ciprofloxacin Micropollutants from Wastewater Using Ethylenediaminetetraacetic Acid-Functionalized β-Cyclodextrin-Chitosan Adsorbent

The current study pertains to the synthesis of an EDTA-functionalized β-cyclodextrin-chitosan (β-CD-CS-EDTA) composite via a two-step process for the adsorptive removal of toxic heavy metallic ions (i.e., Pb(II), Cu(II), and Ni(II)) and antibiotic micropollutant, i.e., ciprofloxacin (CIP), from water. Different batch adsorption experiments such as pH, reaction time and initial pollutant concentration effects were carried out to identify the adsorption condition to attain the maximum removal efficiency. Kinetics results fit well with the pseudo-second order (PSO) kinetics model for both inorganic and organic pollutants. However, adsorption of heavy metal ions to the adsorbent was faster than that of CIP. Isotherms results showed excellent monolayer adsorption capacities of 330.90, 161, and 118.90 mg g^-1 for Pb(II), Cu(II), and Ni(II), respectively, with a heterogeneous adsorption capacity of 25.40 mg g^-1 for CIP. The adsorption mechanism was investigated using energy dispersive X-ray (EDX), elemental mapping, and Fourier transform infrared (FTIR) techniques. More significantly, the synthesized adsorbent gave good removal efficiencies when it was applied to simultaneously adsorb metal ions and CIP from real wastewater. Furthermore, excellent reusability could be obtained, making it a viable alternative to remove the inorganic and organic micropollutants for wastewater treatment.