Toxicity of tire wear particles and the leachates to microorganisms in marine sediments

The difference between tire wear particles and polyethylene microplastics in stormwater filtration systems: Perspectives from aging process, conventional pollutants removal and microbial communities

Tire wear particles (TWPs) in stormwater runoff have been widely detected and were generally classified into microplastics (MPs). TWPs and conventional MPs can be intercepted and accumulated in stormwater filtration systems, but their impacts on filtration, adsorption and microbial degradation processes of conventional pollutants (organic matters, nitrate and ammonium) have not been clarified. TWPs are different from MPs in surface feature, chemical components, adsorption ability and leaching of additives, which might lead to their different impacts on conventional pollutants removal. In this study, five different levels of aged polyethylene MPs (PEMPs) and aged TWPs contamination in stormwater filtration systems were simulated using thirty-three filtration columns. Results showed that ultraviolet aging treatment was less influential for the aging of TWPs than that of PEMPs, the specific surface area of aged PEMPs (1.603 m2/g) was over two times of unaged TWPs (0.728 m2/g) in the same size. Aged PEMPs and aged TWPs had different impacts on conventional pollutants removal performance and microbial communities, and the difference might be enlarged with exposure duration. The intensified aged PEMPs contamination generally promoted conventional pollutants removal, whereas aged TWPs showed an opposite trend. Mild contamination (0.01% and 0.1%, wt%) of aged PEMP/TWPs was beneficial to the richness and diversity of microbial communities, whereas higher contamination of aged PEMPs/TWPs was harmful. Aged PEMPs and TWPs had different impact on microbial community structure. Overall, the study found that TWPs were more detrimental than PEMPs in filtration systems. The research underscores the need for more comprehensive investigation into the occurrence, effects and management strategies of TWPs, as well as the importance of distinguishing between TWPs and MPs in future studies.

Tire and road wear particles in the aquatic organisms - A review of source, properties, exposure routes, and biological effects

With the continuous development of the modern social economy, rubber has been widely used in our daily life. Tire and road wear particles (TRWPs) are generated by friction between tires and the road surface during the processes of driving, acceleration, and braking. TRWPs can be divided into three main components according to their source: tire tread, brake wear, and road wear. Due to urban runoff, TRWPs flow with rainwater into the aquatic environment and influence the surrounding aquatic organisms. As an emerging contaminant, TRWPs with the characteristics of small particles and strong toxicity have been given more attention recently. Here, we summarized the existing knowledge of the physical and chemical properties of TRWPs, the pathways of TRWPs into the water body, and the exposure routes of TRWPs. Furthermore, we introduced the biological effects of TRWPs involved in size, concentration, and shape, as well as key toxic compounds involved in heavy metals, polycyclic aromatic hydrocarbons (PAHs), N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine (6PPD), and benzothiazole on aquatic organisms, and attempted to find the relevant factors influencing the toxic effects of TRWPs. In the context of existing policies that ignore pollution from TRWPs emissions in the aquatic environment, we also proposed measures to mitigate the impact of TRWPs in the future, as well as an outlook for TRWPs research.

Potential deterioration of chemical water quality due to trace metal adsorption onto tire and road wear particles - Environmentally representative experiments

Tire wear particles are an increasing issue in particle emissions to the environment. Germany-wide approximately 100,000 t tire wear particles are emitted every year into the environment which are estimated to be one third of the microplastic emissions. Up to 20% are estimated to reach inland surface waters. Their behavior in the aquatic environment is understudied. Tire wear particles have an overly hydrophobic surface that is capable of adsorbing substances like trace elements. In this study we investigated the adsorption and desorption of trace metals onto and from the particle surface of tire-related samples in water samples of the Freiberger Mulde, a river with naturally elevated concentration of trace elements. The priority trace metals Cr, Ni, Zn, Cd and Pb show a significant adsorption onto the particle surface of tire-related samples. Tire wear particles themselves revealed adsorption of mainly Ni, Cd and Pb. Regarding the German classification for suspended matter in freshwaters, an endangering of the chemical water quality is expected due to the adsorption process and not due to the particles themselves. Upcoming electromobility is expected to increase the Zn (increased tire abrasion) and decrease the Cu amount (reduced brake abrasion) released to freshwaters.

Combined toxicity of pristine or artificially aged tire wear particles and bisphenols to Tigriopus japonicus

Tire wear particles (TWPs) are considered an important component of microplastic pollution in the marine environment and occur together with a variety of aquatic pollutants, including frequently detected bisphenols. The adverse effects of TWPs or bisphenols on aquatic organisms have been widely reported. However, the combined toxicity of TWPs and bisphenols is still unknown. In this study, the combined toxicity of both pristine (p-) and aged TWPs (a-TWPs) and four bisphenols ((bisphenol A (BPA), bisphenol F (BPF), bisphenol S (BPS), and bisphenol AF (BPAF)) to Tigriopus japonicus was evaluated. TWPs increased the toxicity of BPA and BPF but decreased the toxicity of BPAF. For BPS, there was synergistic toxic effect in the presence of p-TWPs, but slightly antagonistic effect was observed in the presence of a-TWPs. This adsorption of BPAF by TWPs resulted in a reduction of its toxicity to the copepod. A-TWPs could release more Zn than p-TWPs, and the released Zn contributed to the synergistic effect of TWPs and BPA or BPF. The aggregation formed by TWPs in certain sizes (e.g., 90-110 μm) could cause intestinal damage and lipid peroxidation in T. japonicus. The synergistic effect of p-TWPs and BPS might be due to the aggregation size of the binary mixture. The results of the current study will be important to understand the combined toxic effect of TWPs and bisphenols and the potential toxic mechanisms of the binary mixture.

Aging increases the particulate- and leachate-induced toxicity of tire wear particles to microalgae

The toxic effects of tire wear particles (TWPs) on organisms have attracted widespread concerns over the past decade. However, the underlying toxicity mechanism of TWPs, especially aged TWPs to marine microalgae remains poorly understood. This study investigated the physiological and metabolic responses of Phaeodactylum tricornutum to different concentrations of TWPs (Experiment 1), virgin and differently aged TWPs (Experiment 2) as well as their leachates and leached particles (Experiment 3). Results demonstrated that TWPs promoted the growth of microalgae at low concentrations (0.6 and 3 mg L-1) and inhibited their growth at high concentrations (15 and 75 mg L-1). Moreover, aged TWPs induced more profound physiological effects on microalgae than virgin TWPs, including inhibiting microalgae growth, decreasing the content of Chla, promoting photosynthetic efficiency, and causing oxidative damage to algal cells. Untargeted metabolomics analysis confirmed that aged TWPs induced more pronounced metabolic changes than virgin TWPs. This study represented the first to demonstrate that both particulate- and leachate-induced toxicity of TWPs was increased after aging processes, which was confirmed by the changes in the surface morphology of TWPs and enhanced release of additives. Through the significant correlations between the additives and the microalgal metabolites, key additives responsible for the shift of microalgal metabolites were identified. These results broaden the understanding of the toxicity mechanism of aged TWPs to microalgae at the physiological and metabolic levels and appeal for considering the effects of long-term aging on TWP toxicity in risk assessment of TWPs.

Where the rubber meets the road: Emerging environmental impacts of tire wear particles and their chemical cocktails

About 3 billion new tires are produced each year and about 800 million tires become waste annually. Global dependence upon tires produced from natural rubber and petroleum-based compounds represents a persistent and complex environmental problem with only partial and often-times, ineffective solutions. Tire emissions may be in the form of whole tires, tire particles, and chemical compounds, each of which is transported through various atmospheric, terrestrial, and aquatic routes in the natural and built environments. Production and use of tires generates multiple heavy metals, plastics, PAH's, and other compounds that can be toxic alone or as chemical cocktails. Used tires require storage space, are energy intensive to recycle, and generally have few post-wear uses that are not also potential sources of pollutants (e.g., crumb rubber, pavements, burning). Tire particles emitted during use are a major component of microplastics in urban runoff and a source of unique and highly potent toxic substances. Thus, tires represent a ubiquitous and complex pollutant that requires a comprehensive examination to develop effective management and remediation. We approach the issue of tire pollution holistically by examining the life cycle of tires across production, emissions, recycling, and disposal. In this paper, we synthesize recent research and data about the environmental and human health risks associated with the production, use, and disposal of tires and discuss gaps in our knowledge about fate and transport, as well as the toxicology of tire particles and chemical leachates. We examine potential management and remediation approaches for addressing exposure risks across the life cycle of tires. We consider tires as pollutants across three levels: tires in their whole state, as particulates, and as a mixture of chemical cocktails. Finally, we discuss information gaps in our understanding of tires as a pollutant and outline key questions to improve our knowledge and ability to manage and remediate tire pollution.

Effects of microplastics on the structure and function of bacterial communities in sediments of a freshwater lake

As an emerging pollutant, microplastics (MPs) cause widespread concern around the world owing to the serious threat they pose to ecosystems. In particular, sediments are thought to be the long-term sink for the continual accumulation of MPs in freshwater ecosystems. Polyethylene (PE) and polyethylene terephthalate (PET) have been frequently detected with large concentration variations in freshwater sediments from the lower reaches of the Yangtze River, one of the most economically developed regions in China, characterized by accelerated urbanization and industrialization, high population density and high plastics consumption. However, the impact of PE and PET on the sedimental bacterial community composition and its function has not been well reported for this specific region. Herein, PE and PET particles were added to freshwater sediments to assess the effects of different MP types on the bacterial community and its function, using three concentrations (500, 1500 and 2500 items/kg) per MP and incubations of 35, 105 and 175 days, respectively. This study identified a total of 68 phyla, 211 classes, 518 orders, 853 families and 1745 genera. Specifically, Proteobacteria, Chloroflexi, Acidobacteriota, Actinobacteriota and Firmicutes were the top five phyla. A higher bacterial diversity was obtained in control sediments than in the MP-treated sediments. The presence of MPs, whether PET or PE, had significant impact on the bacterial diversity, community structure and community composition. PICRUSt2 and FAPOTAX predictions demonstrated that MPs could potentially affect the metabolic pathways and ecologically functional groups of bacteria in the sediment. Besides the MP-related factors, such as the type, concentration and incubation time, the physicochemical parameters had an effect on the structure and function of the bacterial community in the freshwater sediment. Taken together, this study provides useful information for further understanding how MPs affect bacterial communities in the freshwater sediment of the lower reaches of the Yangtze River, China.

Generation of environmentally persistent free radicals on photoaged tire wear particles and their neurotoxic effects on neurotransmission in Caenorhabditis elegans

Tire wear particles (TWP) are a prevalent form of microplastics (MPs) extensively distributed in the environment, raising concerns about their environmental behaviors and risks. However, knowledge regarding the properties and toxicity of these particles at environmentally relevant concentrations, specifically regarding the role of environmentally persistent free radicals (EPFRs) generated during TWP photoaging, remains limited. In this study, the evolution of EPFRs on TWP under different photoaging times and their adverse effects on Caenorhabditis elegans were systematically investigated. The photoaging process primarily resulted in the formation of EPFRs and reactive oxygen species (O2•-, ⋅OH, and 1O2), altering the physicochemical properties of TWP. The exposure of nematodes to 100 μg/L of TWP-50 (TWP with a photoaging time of 50 d) led to a significant decrease in locomotory behaviors (e.g., head thrashes, body bends, and wavelength) and neurotransmitter contents (e.g., dopamine, glutamate, and serotonin). Similarly, the expression of neurotransmission-related genes was reduced in nematodes exposed to TWP-50. Furthermore, the addition of free-radical inhibitors significantly suppressed TWP-induced neurotoxicity. Notably, correlation analysis revealed a significantly negative correlation between EPFRs levels and the locomotory behaviors and neurotransmitter contents of nematodes. Thus, it was concluded that EPFRs on photoaged TWP induce neurotoxicity by affecting neurotransmission. These findings elucidate the toxicity effects and mechanisms of EPFRs, emphasizing the importance of considering their contributions when evaluating the environmental risks associated with TWP.

Tire materials disturb transformations of nitrogen compounds and affect the structure of biomass in aerobic granular sludge reactors

Tire materials (TMs) present a notable hazard due to their potential to release harmful chemicals and microplastics into the environment. They can infiltrate wastewater treatment plants, where their effects remain inadequately understood, raising concerns regarding their influence on treatment procedures. Thus, this study investigated the impact of TMs in wastewater (10, 25, 50 mg/L) on wastewater treatment efficiency, biomass morphology, and microbial composition in aerobic granular sludge (AGS) reactors. TM dosage negatively correlated with nitrification and denitrification efficiencies, reducing overall nitrogen removal, but did not affect the efficiency of chemical-oxygen-demand removal. The presence of TMs increased the diameter of the granules due to TM incorporation into the biomass. The most frequently leached additives from TMs were N-(1,3-dimethylbutyl)-N'-phenyl-1,4-phenylenediamine, benzothiazole (BTH), and 2-hydroxybenzothiazole. In the treated wastewater, only BTH and aniline were detected in higher concentrations, which indicates that tire additives were biodegraded by AGS. The microbial community within the AGS adapted to TMs and their chemicals, highlighting the potential for efficient degradation of tire additives by bacteria belonging to the genera Rubrivivax, Ferruginibacter, and Xanthomonas. Additionally, our research underscores AGS's ability to incorporate TMs into biomass and effectively biodegrade tire additives, offering a promising solution for addressing environmental concerns related to TMs.

Temperature-dependent effects of microplastics on sediment bacteriome and metabolome

The increasing prevalence of microplastics in the environment has become a concern for various ecosystems, including wetland ecosystems. Here, we investigated the effects of three popular microplastic types: polyethylene, polylactic acid, and tire particles at 5 °C and 25 °C on the sediment microbiome and metabolome at the 3% (w/w) level. Results indicated that temperature greatly influenced catalase and neutral phosphatase activities, whereas the type of microplastic had a more significant impact on urease and dehydrogenase activities. The addition of microplastic, especially tire particles, increased microbial diversity and significantly altered the microbial community structure and metabolic profile, leading to the formation of different clusters of microbial communities depending on the temperature. Nonetheless, the effect of temperature on the metabolite composition was less significant. Functional prediction showed that the abundance of functional genes related to metabolism and biogeochemical cycling increased with increasing temperature, especially the tire particles treatment group affected the nitrogen cycling by inhibiting ureolysis and nitrogen fixation. These observations emphasize the need to consider microplastic type and ambient temperature to fully understand the ecological impact of microplastics on microbial ecosystems.

Photo-oxidation of Micro- and Nanoplastics: Physical, Chemical, and Biological Effects in Environments

Micro- and nanoplastics (MNPs) are attracting increasing attention due to their persistence and potential ecological risks. This review critically summarizes the effects of photo-oxidation on the physical, chemical, and biological behaviors of MNPs in aquatic and terrestrial environments. The core of this paper explores how photo-oxidation-induced surface property changes in MNPs affect their adsorption toward contaminants, the stability and mobility of MNPs in water and porous media, as well as the transport of pollutants such as organic pollutants (OPs) and heavy metals (HMs). It then reviews the photochemical processes of MNPs with coexisting constituents, highlighting critical factors affecting the photo-oxidation of MNPs, and the contribution of MNPs to the phototransformation of other contaminants. The distinct biological effects and mechanism of aged MNPs are pointed out, in terms of the toxicity to aquatic organisms, biofilm formation, planktonic microbial growth, and soil and sediment microbial community and function. Furthermore, the research gaps and perspectives are put forward, regarding the underlying interaction mechanisms of MNPs with coexisting natural constituents and pollutants under photo-oxidation conditions, the combined effects of photo-oxidation and natural constituents on the fate of MNPs, and the microbiological effect of photoaged MNPs, especially the biotransformation of pollutants.

Sulfate radical-based advanced oxidation process effects on tire wear particles aging and ecotoxicity

Tire wear particles (TWPs) are widely distributed in natural water and pose as major pollutants in aquatic environments. In this study, heat-activated persulfate (HPT) and ultraviolet-activated persulfate treatments (UPT) were employed to investigate the influence of sulfate radical (SO4-•)-based advanced oxidation process (SAOPs) on TWP physicochemical properties and to clarify their ecotoxic effects in laboratory-level studies. Results showed that the specific surface areas of TWPs increased after UPT but decreased after HPT. In terms of chemical properties, the increase of oxygen-containing functional groups on the surfaces of TWPs was more evident in UPT than that in HPT. The atrazine (ATZ) adsorption capacity of TWPs after HPT and UPT was increased compared with the untreated TWPs. Atrazine adsorbed by TWPs was easily resolved and released in artificial intestinal fluid (1.89-2.08 mg/g) and artificial gastric fluid (1.60-2.04 mg/g) conditions. Acute toxicity experiments of Photobacterium phosphoreum and SEM-EDS detection results suggested that various heavy metals (e.g., Zn2+, Cu2+) in the TWPs would be released into the water system in SAOPs. ATZ released from TWPs that adsorbed ATZ herbicide, rather than TWPs themselves, had a negative effect on aquatic plant growth (e.g., C. vulgaris). The leaching solution of oxidized TWPs (after HPT and UPT) showed a more significant inhibition effect on the zebrafish survival compared with that of untreated TWPs, which was possibly caused by the generation of oxidation byproducts such as N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine-quinone.

Effect of bioturbation of the mitten crab on distribution of tire wear particles and their combined effect on sediment ecosystem

Tire wear particles (TWPs) are a major source of environmental microplastic pollution which gradually settle and accumulate in sediments after entering the aquatic environment, which can affect the behaviors of benthic organisms. Bioturbation of benthic species could affect the fate, impacts and potential risks of TWPs by altering the properties and structure of sediments. Therefore, in this study, the effect of TWPs on the burrowing activity of Chinese mitten crab (Eriocheir sinensis) was investigated. In addition, the effects of crab bioturbation on the distribution of TWPs and their additives were studied. The combined effects of TWPs and crab bioturbation on the microbial communities in the sediments were also explored. The results of this study showed that both TWPs and the leachate significantly inhibited the burrowing activity of crabs. TWPs in the surface layer of sediments were re-distributed by crab bioturbation and enriched mainly in the sediments near the burrow walls. Meanwhile, the heavy metals (i.e., Zn, Ca, Mg, Ba and Al) used as additives during the tire production in the burrow walls significantly increased as the accumulation of TWPs near burrow walls. In this study, TWP exposure decreased the bacterial diversity and abundance, as well as the functional genes related to carbon and nitrogen cycling process, but crab bioturbation increased them in the sediments of burrow walls by constructing a unique habitat. However, after TWPs entering into burrows, they were significantly decreased in the sediments near the burrow walls like the effects of TWPs, suggesting the negative effects of TWPs could play a dominant role in this combined system. Overall, this study is important for evaluating the distribution and effects of TWP pollution in the sediment ecosystem under biological factors such as bioturbation.

Stress response mechanism of wastewater biological nitrogen removal systems to environmentally realistic concentrations of tire wear particles: Contribution of leachable additives

The study quantified the biological nitrogen removal performance, microbial metabolism, microbial community structure, and antioxidant system in a sequencing batch reactor under long-term exposure to 0.1 and 1 mg/L tire wear particles (TWPs), and determined the contribution of leachable additives to the biotoxicity of TWPs. The results showed that long-term exposure to 0.1 and 1 mg/L TWPs inhibited both the nitrification and denitrification processes, reducing ammonia nitrogen (NH4+-N) and total nitrogen (TN) removal efficiency. The TWP leachate (TWPL) primarily contributed to the denitrification inhibition by TWPs, potentially due to the high concentration of zinc ions in the leachable additive. Furthermore, both TWP and TWPL inhibit nitrogen conversion, with TWP inhibiting the generation and transfer of electrons, while TWPL only negatively affects the electron transfer process. This study presents novel insights into the impact of TWPs on biological nitrogen removal, underscoring its broader implications for the geochemical nitrogen cycle.

First insights into 6PPD-quinone formation from 6PPD photodegradation in water environment

p-Phenylenediamines (PPDs), an important type of rubber antioxidants, have received little study on their environmental fate, particularly for their vital photodegradation process in water environment. Accordingly, N-(1,3-dimethylbutyl)-N'-phenyl-1,4-phenylenediamine (6PPD), as a representative of PPDs, was investigated experimentally and theoretically for its photodegradation in water. Rapid photodegradation occurred when 6PPD was exposed to illumination especially UV region irradiation. Under acidic conditions, the photodegradation of 6PPD accelerated mainly due to the increased absorption of long wavelength irradiation by ionized 6PPD. Nine photodegradation products (e.g., 6PPD-quinone (6PPDQ)) of 6PPD were identified by an ultra-performance liquid chromatography QTOF mass spectrometry. Molar yields of photoproducts such as 6PPDQ, aniline, 4-aminodiphenylamine, and 4-hydroxydiphenylamine were 0.03 ± 0.00, 0.10 ± 0.01, 0.03 ± 0.02, and 0.08 ± 0.01, respectively. Mechanisms involved in 6PPD photodegradation include photoexcitation, direct photolysis, self-sensitized photodegradation, and 1O2 oxidation, as demonstrated by electron paramagnetic resonance (EPR) analysis, scavenging experiments, and the time-dependent density functional theory (TD-DFT). Notably, the toxicity of the reaction solution formed during the photodegradation of 6PPD was increased by the formation of highly toxic products (e.g., 6PPDQ). This study provides the first explanation for photodegradation mechanisms of 6PPD and confirms the pathway of 6PPDQ produced by the photoreaction in water environment.