Microplastics in agricultural soils in China: Sources, impacts and solutions

Bacterial community in the buckwheat rhizosphere responds more sensitively to single microplastics in lead-contaminated soil compared to the arbuscular mycorrhizal fungi community

Soil pollution by microplastics (MPs), defined as plastic particles <5 mm, and heavy metals is a significant environmental issue. However, studies on the co-contamination effects of MPs and heavy metals on buckwheat rhizosphere microorganisms, especially on the arbuscular mycorrhizal fungi (AMF) community, are limited. We introduced low (0.01 g kg-1) and high doses of lead (Pb) (2 g kg-1) along with polyethylene (PE) and polylactic acid (PLA) MPs, both individually and in combination, into soil and assessed soil properties, buckwheat growth, and rhizosphere bacterial and AMF communities in a 40-day pot experiment. Notable alterations were observed in soil properties such as pH, alkaline hydrolyzable nitrogen (AN), and the available Pb (APb). High-dose Pb combined with PLA-MPs hindered buckwheat growth. Compared to the control, bacterial Chao1 richness and Shannon diversity were lower in the high dose Pb with PLA treatment, and differentially abundant bacteria were mainly detected in the high Pb dose treatments. Variations in bacterial communities correlated with APb, pH and AN. Overall, the AMF community composition remained largely consistent across all treatments. This phenomenon may be due to fungi having lower nutritional demands than bacteria. Stochastic processes played a relatively important role in the assembly of both bacterial and AMF communities. In summary, MPs appeared to amplify both the positive and negative effects of high Pb doses on the buckwheat rhizosphere bacteria.

Beyond surface: Unveiling ecological and economic ramifications of microplastic pollution in the oceans

Every year, the global production of plastic waste reaches a staggering 400 million metric tons (Mt), precipitating adverse consequences for the environment, food safety, and biodiversity as it degrades into microplastics (MPs). The multifaceted nature of MP pollution, coupled with its intricate physiological impacts, underscores the pressing need for comprehensive policies and legislative frameworks. Such measures, alongside advancements in technology, hold promise in averting ecological catastrophe in the oceans. Mandated legislation represents a pivotal step towards restoring oceanic health and securing the well-being of the planet. This work offers an overview of the policy hurdles, legislative initiatives, and prospective strategies for addressing global pollution due to MP. Additionally, this work explores innovative approaches that yield fresh insights into combating plastic pollution across various sectors. Emphasizing the importance of a global plastics treaty, the article underscores its potential to galvanize collaborative efforts in mitigating MP pollution's deleterious effects on marine ecosystems. Successful implementation of such a treaty could revolutionize the plastics economy, steering it towards a circular, less polluting model operating within planetary boundaries. Failure to act decisively risks exacerbating the scourge of MP pollution and its attendant repercussions on both humanity and the environment. Central to this endeavor are the formulation, content, and execution of the treaty itself, which demand careful consideration. While recognizing that a global plastics treaty is not a panacea, it serves as a mechanism for enhancing plastics governance and elevating global ambitions towards achieving zero plastic pollution by 2040. Adopting a life cycle approach to plastic management allows for a nuanced understanding of possible trade-offs between environmental impact and economic growth, guiding the selection of optimal solutions with socio-economic implications in mind. By embracing a comprehensive strategy that integrates legislative measures and technological innovations, we can substantially reduce the influx of marine plastic litter at its sources, safeguarding the oceans for future generations.

Effects of salinity on naphthalene adsorption and toxicity of polyethylene microparticles on Artemia salina

Plastic pollution in aquatic ecosystems is increasing and plastic particles may adsorb and transport a diverse array of contaminants, thereby increasing their bioavailability to biota. This investigation aimed to evaluate the effects of varying polyethylene microplastics (PE MPs) and naphthalene (NAPH) concentrations on the survival and feeding rates of the model organism, Artemia salina, as well as NAPH adsorption to microplastics at different salinity levels (17, 75, 35.5 and 52.75 g L-1) under selected climate change scenarios. Survival (48 h) and feeding rates (6 h) of A. salina were also monitored, revealing that the presence of higher PE and NAPH concentrations lead to decreased survival rates while also increasing the number and size of microplastic particles in the saline solutions. Higher PE concentrations negatively affected A. salina feeding rates and NAPH concentrations were positively correlated with particle number and size, as well as with NAPH and PE adsorption rates in solution. Our findings demonstrate that the co-occurrence of microplastics and NAPH in aquatic environments can result in detrimental zooplankton survival and feeding rate effects. Furthermore, this interaction may contribute to the accumulation of these contaminants in the environment, highlighting the need to simultaneously monitor and mitigate the presence of microplastics and organic pollutants, like NAPH, in aquatic environments.

Occurrence characteristics and potential risk of microplastics under different land conditions

Microplastics (MPs) pollution has caused widespread concern, more researchers have focused on MPs in farmland soil. However, the distribution of MPs in different land use types, land restoration years and crop types remained largely unexplored. Therefore, the study investigated the distribution characteristics and evaluated ecological risk of MPs in soil of northern Shaanxi Province, China. The abundance, particle size, morphology and polymer types of MPs in soil were analyzed by sample collection, Raman spectroscopy and laser direct infrared spectroscopy (LDIR). The ecological risk index (H) and pollution load index (PLI) were employed to assess the risks posed by MPs in the soil. It was shown that the concentration of MPs in farmland soil was the highest (4483 items·kg-1) among the different land use types. The average abundance of microplastics in farmland soil was 1.98 times than that in industrial park soil. An increase in restoration years corresponded with a decrease in MPs abundance and an increase in smaller-sized MPs. In addition, the content of MPs in the soil of perennial crops was more stable, with fluctuations less than 25%, and the size of MPs was smaller than that of the annual crops. The main types of MPs in the soil of the study area were PP (28.5%) and PET (24.1%), MPs with size between 20 and 40 μm were dominated. Based on the pollution load index (PLI), 51.9% of the sampling sites were categorized as moderately polluted, and the MPs pollution risk of farmland soil was the highest. Mild and moderate pollution caused fewer adverse impact, while extremely strong pollution was detrimental to ecosystems and human health. In general, the study would provide a foundational understanding of MPs pollution levels and environment risk associated with different land use types, land restoration years and crop types.

Occurrence and spatiotemporal distribution of natural and synthetic steroid hormones in soil, water, and sediment systems in suburban agricultural area of Guangzhou City, China

Steroid hormones are highly potent compounds that can disrupt the endocrine systems of aquatic organisms. This study explored the spatiotemporal distribution of 49 steroid hormones in agricultural soils, ditch water, and sediment from suburban areas of Guangzhou City, China. The average concentrations of Σsteroid hormones in the water, soils, and sediment were 97.7 ng/L, 4460 ng/kg, and 9140 ng/kg, respectively. Elevated hormone concentrations were notable in water during the flood season compared to the dry season, whereas an inverse trend was observed in soils and sediment. These observations were attributed to illegal wastewater discharge during the flood season, and sediment partitioning of hormones and manure fertilization during the dry season. Correlation analysis further showed that population, precipitation, and number of slaughtered animals significantly influenced the spatial distribution of steroid hormones across various districts. Moreover, there was substantial mass transfer among the three media, with steroid hormones predominantly distributed in the sediment (60.8 %) and soils (34.4 %). Risk quotients, calculated as the measured concentration and predicted no-effect concentration, exceeded 1 at certain sites for some hormones, indicating high risks. This study reveals that the risk assessment of steroid hormones requires consideration of their spatiotemporal variability and inter-media mass transfer dynamics in agroecosystems.

Advancing microplastic surveillance through photoacoustic imaging and deep learning techniques

Microplastic contamination presents a significant global environmental threat, yet scientific understanding of its morphological distribution within ecosystems remains limited. This study introduces a pioneering method for comprehensive microplastic assessment and environmental monitoring, integrating photoacoustic imaging and advanced deep learning techniques. Rigorous curation of diverse microplastic datasets enhances model training, yielding a high-resolution imaging dataset focused on shape-based discrimination. The introduction of the Vector-Quantized Variational Auto Encoder (VQVAE2) deep learning model signifies a substantial advancement, demonstrating exceptional proficiency in image dimensionality reduction and clustering. Furthermore, the utilization of Vector Quantization Microplastic Photoacoustic imaging (VQMPA) with a proxy task before decoding enhances feature extraction, enabling simultaneous microplastic analysis and discrimination. Despite inherent limitations, this study lays a robust foundation for future research, suggesting avenues for enhancing microplastic identification precision through expanded sample sizes and complementary methodologies like spectroscopy. In conclusion, this innovative approach not only advances microplastic monitoring but also provides valuable insights for future environmental investigations, highlighting the potential of photoacoustic imaging and deep learning in bolstering sustainable environmental monitoring efforts.

A comprehensive evaluation of influencing factors of neonicotinoid insecticides (NEOs) in farmland soils across China: First focus on film mulching

Neonicotinoid insecticide (NEO) residues in agricultural soils have concerning and adverse effects on agroecosystems. Previous studies on the effects of farmland type on NEOs are limited to comparing greenhouses with open fields. On the other hand, both NEOs and microplastics (MPs) are commonly found in agricultural fields, but their co-occurrence characteristics under realistic fields have not been reported. This study grouped farmlands into three types according to the covering degree of the film, collected 391 soil samples in mainland China, and found significant differences in NEO residues in the soils of the three different farmlands, with greenhouse having the highest NEO residue, followed by farmland with film mulching and farmland without film mulching (both open fields). Furthermore, this study found that MPs were significantly and positively correlated with NEOs. As far as we know this is the first report to disclose the association of film mulching and MPs with NEOs under realistic fields. Moreover, multiple linear regression and random forest models were used to comprehensively evaluate the factors influencing NEOs (including climatic, soil, and agricultural indicators). The results indicated that the random forest model was more reliable, with MPs, farmland type, and total nitrogen having higher relative contributions.

Microplastics affect the ecological stoichiometry of plant, soil and microbes in a greenhouse vegetable system

Microplastic (MP) pollution is a growing global issue due to its potential threat to ecosystem and human health. Low-density polyethylene (LDPE) MP is the most common type of plastics polluting agricultural soils, negatively affecting soil-microbial-plant systems. However, the effects of LDPE MPs on the carbon (C): nitrogen (N): phosphorus (P) of soil-microbial-plant systems have not been well elucidated. Thus, we conducted a pot experiment with varying LDPE MP concentrations (w/w) (control without MPs; 0.2 % MPs (PE1); 5 % MPs (PE2); and 10 % MPs (PE3)) to study their effects on soil-microbial-plant C-N-P stoichiometry. Soil C:N ratio increased 2.3 and 3.4 times in PE2 and PE3, respectively. Soil C:P ratio increased 2.2 and 3.6 times in PE2 and PE3, respectively. Soil microbial C:N ratios decreased by 46.2 % in PE1, while C:P ratios decreased by 59.2, 38.6, and 67.9 % in PE1, PE2, and PE3, respectively. Soil microbial N:P ratio decreased in PE1 (17.2) and PE3 (59.1 %). MPs increased shoot C content and C:N ratios, particularly at the 5 % MP addition rate. MP addition altered dissolved organic C, N, and P concentrations, depending on the MP addition rate. Microbial community responses to MP exposure were complex, leading to variable effects on different microbial groups at different MP addition rates. Structural equation modeling showed that MP addition had a direct positive effect (β = 0.96) on soil C-N-P stoichiometry and a direct negative effect (β = -1.34) on microbial C-N-P stoichiometry. These findings demonstrate the complex interactions between MPs, soil microorganisms, and nutrient dynamics, highlighting the need for further research to better understand the ecological implications of MP pollution in terrestrial ecosystems.

Aging microplastics and coupling of "microplastic-electric fields" can affect soil water-stable aggregates' stability

As plastic waste continues to accumulate in natural environments, the impact of aged microplastics (MPs) on soil ecosystems is increasingly becoming a matter of global concern. However, the effects of aged MPs on the stability of water-stable soil aggregates have not been clearly elucidated. Therefore, we investigated the influence of two types of aged MPs, namely, polystyrene and polypropylene, on soil aggregate stability. We found that MPs have a notable effect on the fundamental structural units of soil aggregates, including organic matter and microorganisms. Consequently, reducing the structural stability of soil aggregates by disrupting the bonding mechanisms of soil particles affects the erosion resistance of coarse aggregates. Furthermore, we investigated the coupled effects of "soil electric field-MPs" on aggregate stability. The results showed that the critical potential for aggregate explosive fragmentation corresponds to an electric field intensity at an electrolyte concentration of 10-2 mol·L-1. In this study, we have clarified the primary factors through which MPs affect the stability of water-stable soil aggregates, providing new insights for a more accurate assessment of the impact of MPs on soil aggregates.

Effects of soil properties and land use patterns on the distribution of microplastics: A case study in southwest China

Microplastic pollution in the soil environment is of great concern. However, the current research on microplastics (MPs) in Southwest China mainly focuses on their distribution characteristics and sources in soil, making the understanding of the soil properties and land use patterns influencing soil MPs insufficient. In this study, the abundance and distribution characteristics of MPs in the soil of different land use patterns in Guizhou Province were determined. The results revealed that the average abundance of MPs in soils was 2936 items/kg, ranging from 780 to 9420 items/kg. The MPs were mainly small particle size (0-0.5 mm), granular, and black, accounting for 87.5%, 36.6%, and 82.2%, respectively. The most common polymer types of MPs were polypropylene, polyethylene terephthalate, and polyethylene, which accounted for 20.4%, 16.8%, and 16.4%, respectively. As soil bulk density increased, microplastic abundance and small particle size decreased. Soil microplastic abundance slightly decreased with increasing soil porosity. The abundance of MPs increased with the increase in soil pH, but no significant correlation was observed between soil organic matter content and microplastic abundance. pH was the major factor that affected the microplastic distribution, which accounted for 32.5%. This study provides insight into the distribution and influencing factors of soil MPs and also provides a theoretical basis for subsequent research on soil microplastic pollution.

From organic fertilizer to the soils: What happens to the microplastics? A critical review

In recent, soil microplastic pollution arising from organic fertilizers has been of a great increasing concern. In response to this concern, this review presents a comprehensive analysis of the occurrence and evolution of microplastics in organic fertilizers, their ingress into the soil, and the subsequent impacts. Organic fertilizers are primarily derived from solid organic waste generated by anthropocentric activities including urban (daily-life, municipal wastes and sludge), agricultural (manure, straw), and industrial (like food industrial waste etc.) processes. In order to produce organic fertilizer, the organic solid wastes are generally treated by aerobic composting or anaerobic digestion. Currently, microplastics have been widely detected in the raw materials and products of organic fertilizer. During the process of converting organic solid waste materials into fertilizer, intense oxidation, hydrolysis, and microbial actions significantly alter the physical, chemical, and surface biofilm properties of the plastics. After the organic fertilizer application, the abundances of microplastics significantly increased in the soil. Additionally, the degradation of these microplastics often promotes the adsorption of organic pollutants and affects their retention time in the soil. These microplastics, covered by biofilms, also significantly alter soil ecology due to the unique properties of the biofilm. Furthermore, the biofilms also play a role in the degradation of microplastics in the soil environment. This review offers a new perspective on the soil environmental processes involving microplastics from organic fertilizer sources and highlights the challenges associated with further research on organic fertilizers and microplastics.

An evaluation on microplastic accumulations in Turkish soils under different land uses

Microplastic (MP) pollution is now widely reported in soil ecosystems. However, the level of this pollution in soil ecosystems has not been sufficiently elucidated. Moreover, there is little understanding of how land use conditions affect the occurrence and distribution of MPs in soils. Therefore, this study examined 55 soil samples (44 agricultural and 11 urban) from the Mediterranean, Aegean, and Marmara regions of Türkiye, representing both agricultural and urban land uses. The samples were analyzed for MP distribution characteristics, such as abundance, shape, size, color, and type. Different types of MPs were detected in the soil samples, and their averages in agricultural and urban soils were 192.7 ± 14.2 and 127.3 ± 21.6 particles kg-1, respectively. MP abundance in the soil exhibited variations between different land uses, with agricultural areas showing higher levels compared to urban areas. In agricultural soils, MPs were predominantly blue-colored (44.6 %), in the form of fibers (74.9 %), smaller than 1000 μm (66.1 %), and primarily constituted polyethylene (90.8 %). In urban areas, MPs were also blue-colored (54.7 %), had a fiber shape (64.2 %), smaller than 1000 μm (70.6 %), and mostly belonged to the polyethylene category (78.5 %). A significant difference in MP concentrations was observed between agricultural and urban areas, reflecting the influence of distinct land uses on MP levels. Moreover, Principal Component Analysis (PCA) revealed that soil properties, including pH, electrical conductivity, organic matter, aggregate stability, average weight diameter, sand, clay, and silt, emerged as the primary determinants influencing the abundance and size of MPs within the soil. These findings contribute valuable insights into the origins of soil MPs and the intricate connections between MPs and varying soil characteristics across diverse land use categories.

Effects of microplastic contamination on the hydraulic, water retention, and desiccation crack properties of a natural clay exposed to leachate

Microplastic (MP) can significantly affect soil behaviour and the ecosystem. This paper presents an experimental study to investigate the effects of MP contamination and leachate exposure on the desiccation cracks, hydraulic conductivity, and water retention properties of the natural black clay. The leachate was from a landfill in Australia. The black clay was incorporated with up to 2.0% MPs by weight (w/w) with diverse dimensions and mixed with water/leachate. The measured properties include saturated hydraulic conductivity (ksat), soil-water characteristic curves, moisture evaporation rates, and crack intensity factors. The results suggest that the inclusion of MPs significantly increases ksat, and this increase is more obvious for soils with larger dimensions and contents of MPs, e.g., ksat of the black clay with 2.0% of 500 μm MP increases significantly by 206% (p < 0.05). The black clay exposed to leachate exhibits a slight increase in ksat due to the low viscosity of leachate. The existence of MPs decreases the residual moisture contents and air-entry pressures, and so does the water retention capacity (v/v %) of the black clay. The exposure to leachate increases the air-entry pressures by 6.0%-15.8% of the clay. The evaporation rates increase with the dimensions and concentrations of MPs. The highest evaporation rate (0.96 g/h) can be observed in samples exposed to 2.0% 500 μm MP with water addition. For all samples, the crack intensity factors increase when MP content is between 0.2% and 1.0% and decreases slightly after that. After being exposed to leachate, the evaporation rates and crack intensity factors of the black clay are decreased by 2.4%-12.6% and 3.6%-13.7%, respectively.

Microplastics enhance nitrogen loss from a black paddy soil by shifting nitrate reduction from DNRA to denitrification and Anammox

Microplastics (MPs) are frequently detected emerging pollutants in soil that can endanger farmland ecosystems; however, little is known about their impacts on dissimilatory nitrate reduction processes in paddy soil. Here, using the 15N-tracer and microbial molecular techniques, we investigated the effects of MPs (200-400 μm) made of polystyrene (PS), polyvinyl chloride (PVC), and polyethylene (PE) on denitrification, anaerobic ammonium oxidation (Anammox), and dissimilatory nitrate reduction to ammonium (DNRA) and the associated microbial community in a black paddy soil. All MPs increased the Anammox rate by 6.6 %-745 % and decreased the DNRA rate by 15.1 %-74.2 %, while MPs of PS and PE significantly increased the denitrification rate by 79.3 %-102.3 % and 34.8 %-62.1 %, respectively. The MPs promoted the partitioning of NO3- towards denitrification and Anammox while inhibiting DNRA, as suggested by the decreased relative contributions of DNRA from 24.1 % to 5.4 %-14.2 % following MPs amendment. This was attributed to the increased denitrification gene abundance and the enriched specific denitrifier taxa, as well as the decreased DNRA gene abundance. Our findings suggest that the stimulated denitrification and Anammox by MPs, accompanied by the suppression of DNRA, may lead to substantial nitrogen loss in paddy fields, underscoring the need to further evaluate the environmental behaviors of MPs in agricultural ecosystems.

Leaching of chemicals from microplastics: A review of chemical types, leaching mechanisms and influencing factors

It is widely known that microplastics are present everywhere and they pose certain risks to the ecosystem and humans which are partly attributed to the leaching of additives and chemicals from them. However, the leaching mechanisms remain insufficiently understood. This review paper aims to comprehensively and critically illustrate the leaching mechanisms in biotic and abiotic environments. It analyzes and synthesizes the factors influencing the leaching processes. It achieves the aims by reviewing >165 relevant scholarly papers published mainly in the past 10 years. According to this review, flame retardants, plasticizers and antioxidants are the three main groups of additives in microplastics with the potentials to disrupt endocrine functions, reproduction, brain development and kidney functions. Upon ingestion, the MPs are exposed to digestive fluids containing enzymes and acids which facilitate their degradation and leaching of chemicals. Fats and oils in the digestive tracts also aid the leaching and transport of these chemicals particularly the fat-soluble ones. Leaching is highly variable depending on chemical properties and bisphenols leach to a larger extent than other endocrine disrupting chemicals. However, the rates of leaching remain poorly understood, owing probably to multiple factors at play. Diffusion and partitioning are two main mechanisms of leaching in biotic and abiotic environments. Photodegradation is more predominant in the latter, generating reactive oxygen species which cause microplastic aging and leaching with minimal destruction of the chemicals leached. Effects of microplastic sizes on leaching are governed by Sherwood number, thickness of aqueous boundary layer and desorption half-life. This review contributes to better understanding of leaching of chemicals from microplastics which affect their ecotoxicities and human toxicity.

The occurrence and distributions characteristics of microplastics in soils of different land use patterns in Karst Plateau, Southwest China

Microplastics (MPs) in soils have attracted attention worldwide. However, there are few studies on the abundance and morphological characteristics of MPs under different land use patterns in karst areas. In this work, the distribution characteristics of MPs in soils from five different land use patterns, including industrial mining warehouse (IW), cropland (CL), forest land (FL), grassland (GL), and garden land (GP) in karst mountainous areas of southwest China were investigated. The results suggested that soils in Karst Plateau of Guizhou province under different land use patterns have all been polluted by MPs. The average microplastic abundances of IW, CL, FL, GL, and GP were 3114, 2948, 2770, 2718, and 4200 item kg-1. In the GP and GL soils, foam was the dominant form of MPs (47.53 % and 45.92 %), with pellet MPs accounting for the smallest proportion, while in IW, CL, and FL soils showed the opposite result. The MPs in all soil samples were dominated by small particles (0-0.5 mm), and the main components were PE, PP, PVC, and PET. Meanwhile, the characteristics of MPs in CL soils varied depending on the planted crops. The average abundances of soil microplastics in farmlands planted with corn, pepper, cabbage, watermelon, and other crops were 2504, 2792, 2987, 2370, and 3655 item kg -1. We suggested that land use pattern and crop type may influence karst soil microplastic contamination. The results of this study provide a scientific basis for understanding and controlling the distribution, degradation, and migration of MP pollution in karst regions.

Distribution of microplastic contamination in the major tributaries of the Yellow River on the Loess Plateau

Microplastic pollution in rivers had gained increased attention worldwide. However, the differences in microplastic characteristics among major tributaries of large rivers and the environmental factors influencing these characteristics remain uncertain. Through field investigation and indoor experiments, the distribution of microplastics and their driving factors were investigated at 96 sampling sites along the three main tributaries (Huangfuchuan, Wuding and Yan River) of the Yellow River in the Loess Plateau. The results revealed that the average microplastic abundance followed this order: Yan River (430.30 items kg-1) > Wuding River (145.09 items kg-1) > Huangfuchuan River (253.33 items kg-1). The abundance was lower than that in most parts of the world. There was a generally increasing trend in average microplastic abundance from upstream to downstream in the three rivers. The most frequently observed microplastic colors observed were black and white, and the most common polymer type were PE and PS in all three rivers. The dominant shape and size in the three rivers were fiber and particles measuring 0.5-5.0 mm, all accounting for more than half of the total microplastic content. The microplastic abundance, shape, and size were primarily influenced by mean annual precipitation and population density. This relationship can be attributed to the fact that increased population density driven by higher demand and consumption of plastic products, while augmented rainfall aggravated the occurrence of floods and provided conditions for plastic degradation and accumulation. This study will provide fundamental data for pollution assessing and ecological protection of the Yellow River, and provide a certain reference for future management and protection on the Loess Plateau.

Microplastics sequestered in the soil affect the turnover and stability of soil aggregates: A review

Plastic products have become ubiquitous in society, and entered various ecosystems due to the massive scale of production. The United Nations Environment Program (UNEP) has listed microplastics (MPs), which form when plastic remnants degrade, as a global emerging pollutant, and the association between soil pollution and MPs has become a popular research topic. This paper systematically reviews research focusing on MP-related soil pollution from the past 10 years (2012-2022), with the identified papers demonstrating that interactions between MPs and soil aggregates has become a research frontier in the field. The presented research provides evidence that soil aggregates are important storage sites for MPs, and that storage patterns of MPs within soil aggregates are influenced by MP characteristics. In addition, MPs affect the formation, turnover, and stability of soil aggregates through the introduction of fracture points along with diverse physicochemical characteristics such as composition and specific surface area. The current knowledge base includes certain issues and challenges that could be addressed in future research by extending the spatial and temporal scales over which microplastic-soil aggregate interactions are studied, unifying quantitative and qualitative methods, and tracing the fates of MPs in the soil matrix. This review contributes to enriching our understanding of how terrestrial MPs interact with soil aggregates, and whether they pose a risk to soil health.

Distribution, sources and main controlling factors of nitrate in a typical intensive agricultural region, northwestern China: Vertical profile perspectives

Nitrate (NO3-) pollution of groundwater is a global concern in agricultural areas. To gain a comprehensive understanding of the sources and destiny of nitrate in soil and groundwater within intensive agricultural areas, this study employed a combination of chemical indicators, dual isotopes of nitrate (δ15N-NO3- and δ18O-NO3-), random forest model, and Bayesian stable isotope mixing model (MixSIAR). These approaches were utilized to examine the spatial distribution of NO3- in soil profiles and groundwater, identify key variables influencing groundwater nitrate concentration, and quantify the sources contribution at various depths of the vadose zone and groundwater with different nitrate concentrations. The results showed that the nitrate accumulation in the cropland and kiwifruit orchard at depths of 0-400 cm increased, leading to subsequent leaching of nitrate into deeper vadose zones and ultimately groundwater. The mean concentration of nitrate in groundwater was 91.89 mg/L, and 52.94% of the samples exceeded the recommended grade III value (88.57 mg/L) according to national standards. The results of the random forest model suggested that the main variables affecting the nitrate concentration in groundwater were well depth (16.6%), dissolved oxygen (11.6%), and soil nitrate (10.4%). The MixSIAR results revealed that nitrate sources vary at different soil depths, which was caused by the biogeochemical process of nitrate. In addition, the highest contribution of nitrate in groundwater, both with high and low concentrations, was found to be soil nitrogen (SN), accounting for 56.0% and 63.0%, respectively, followed by chemical fertilizer (CF) and manure and sewage (M&S). Through the identification of NO3- pollution sources, this study can take targeted measures to ensure the safety of groundwater in intensive agricultural areas.

Tackling microplastics pollution in global environment through integration of applied technology, policy instruments, and legislation

Microplastic pollution is a serious environmental problem that affects both aquatic and terrestrial ecosystems. Small particles with size of less than 5 mm, known as microplastics (MPs), persist in the environment and pose serious threats to various species from micro-organisms to humans. However, terrestrial environment has received less attention than the aquatic environment, despite being a major source of MPs that eventually reaches water body. To reflect its novelty, this work aims at providing a comprehensive overview of the current state of MPs pollution in the global environment and various solutions to address MP pollution by integrating applied technology, policy instruments, and legislation. This review critically evaluates and compares the existing technologies for MPs detection, removal, and degradation, and a variety of policy instruments and legislation that can support the prevention and management of MPs pollution scientifically. Furthermore, this review identifies the gaps and challenges in addressing the complex and diverse nature of MPs and calls for joint actions and collaboration from stakeholders to contain MPs. As water pollution by MPs is complex, managing it effectively requires their responses through the utilization of technology, policy instruments, and legislation. It is evident from a literature survey of 228 published articles (1961-2023) that existing water technologies are promising to remove MPs pollution. Membrane bioreactors and ultrafiltration achieved 90% of MPs removal, while magnetic separation was effective at extracting 88% of target MPs from wastewater. In biological process, one kg of wax worms could consume about 80 g of plastic/day. This means that 100 kg of wax worms can eat about 8 kg of plastic daily, or about 2.9 tons of plastic annually. Overall, the integration of technology, policy instrument, and legislation is crucial to deal with the MPs issues.

Unveiling the effect of microplastics on agricultural crops - a review

Microplastics (MPs), ever since they were identified as a potential and widely distributed persistent contaminant, the number of studies highlighting their impacts on various terrestrial ecosystems have been increasing. Recently, the effect of MPs on the agricultural ecosystem has gained momentum. Hence, the present review examines the impact of microplastics on agricultural crop systems and the mechanism underlying its toxicity. The current review revealed that most of the studies were conducted at a laboratory scale and under controlled conditions. Additionally, it was observed that polystyrene (PS) followed by polyethylene (PE) are the most studied polymer type, while the most studied plants are wheat and maize. Hitherto, literature studies suggest that the microplastics' influence on plant growth can be negative or sometimes neutral; while in some cases it exerts a hormetic effect which depends on other factors determining plant growth. Notably, the main mechanisms through which microplastics influence plant growth are mechanical damage, alteration of soil properties, or by leaching of additives. Overall, with burgeoning research interest in this aspect, the current review has significant implications for the toxicity of MPs on plants and throws light on the need to develop novel guidelines toward the sustainable use of plastics in agricultural sector. However, realistic field-level studies and estimating the MPs concentration at various region are essential to develop remediation approaches. Future studies should also focus on translocation and accumulation of micron sized MPs in edible portion of crops and their effect on food safety.

Emergence of microplastics in the aquatic ecosystem and their potential effects on health risks: The insights into Vietnam

The increase of microplastic contamination in Vietnam is a growing concern due to various domestic, agricultural, and industrial activities. The use of plastic mulch and sludge application in agricultural farmland, textile production, daily consumer items, cleaning agents, and health/personal care products contribute significantly to the increasing microplastic pollution in the aquatic ecosystem. The concentration of microplastics reported in surface water ranged from 0.35 to 519,000 items m-3, with fibers and fragments being the most prevalent shapes. Notably, the high concentration of microplastics was observed in lakes, canals, and megacities such as Ha Noi and Ho Chi Minh City, which poses potential health risks to the local community via drinking-water supply and food chains. As an emerging pollutant, MPs are the transport vectors for contaminants in environmental matrices that act as a carrier of hazardous pollutants, release toxic compounds, and evenly aggregate/accumulate in biota. Recent studies have reported the presence of microplastics in various marine organisms, including fish and shellfish, highlighting the risk of ingestion of these particles by humans and wildlife. Thus, it is imperative to monitor microplastic contamination in the ecosystem to provide helpful information for the government and local communities. Efforts should be taken to reduce microplastic pollution at the source to minimize potential effects on ecological and health safety. This review paper emphasizes the urgent need for further research on microplastic pollution in Vietnam and highlights potential solutions to mitigate this emerging environmental threat. KEYWORKS: single-use plastics; microplastics; ecosystems; plastic waste; health risk; ecological and health safety; pollution mitigation.

Organic fertilizer and irrigation water are the primary sources of microplastics in the facility soil, Beijing

The large-scale utilization of plastic products in agricultural facility production has resulted in considerable accumulation of microplastics in the soil. However, there is a lack of systematic research on the accumulation and distribution of microplastics in facility agriculture. This study examined the presence of microplastics in the 15 representatives of Beijing facility agriculture soil in five districts with different planting years, and assessed the potential pollution risks. The abundance of microplastics in soil layers at a depth of 0-10, 10-20, and 20-30 cm was 896.5 ± 80.0 (range, 160-2120), 630.6 ± 47.0 (180-1340), and 445.3 ± 47.0 (80-1480) items/kg, respectively. Overall, the microplastics were primarily fiber-shaped (72.2 %), white (75.9 %), 1-2 mm in size (37.9 %), and composed of polypropylene and polyethene. The risk assessment indices of the microplastics in the 0-10, 10-20, and 20-30 cm soil layers were 272.1, 289.5, and 291.6, respectively, representing a risk level of 4 in each case. Using the conditional fragmentation model, we found that the microplastics in facility soil featured low stability and small sizes, and their primary sources were organic fertilizer and irrigation water. The number of mulching years, irrigation method, and the amount of organic fertilizer applied, influenced the accumulation of microplastics in the facility soil. This study provides scientific evidence supporting the pollution levels and need for risk control related to microplastics in facility soils.

The effects of polylactic acid bioplastic exposure on midgut microbiota and metabolite profiles in silkworm (Bombyx mori): An integrated multi-omics analysis

Polylactic acid (PLA) is a highly common biodegradable plastic and a potential threat to health and the environment. However, limited data are available on the effects of PLA exposure in the silkworm (Bombyx mori), a model organism used in toxicity studies. In this study, silkworms with or without PLA exposure (P1: 1 mg/L, P5: 5 mg/L, P25: 25 mg/L, and P0: 0 mg/L) for the entire 5th instar period were used to investigate the impact of PLA exposure on midgut morphology, larvae growth, and survival. Mitochondrial damage was observed in the P5 and P25 groups. The weights of the P25 posterior silk gland (5th day in the 5th instar), mature larvae and pupae were all significantly lower than those of the controls (P < 0.05). Dead worm cocoon rates and larva-pupa to 5th instar larvae ratios showed a positive and negative dose-dependent manner with respect to PLA concentrations, respectively. Additionally, reactive oxygen species levels and superoxide dismutase activity of the P25 midgut were significantly higher and lower when compared with controls, respectively (P < 0.05). The molecular mechanisms underlying the effects of PLA and associated physiological responses were also investigated. In the midgut metabolome, 127 significantly different metabolites (variable importance projection >1 and P < 0.05) were identified between the P0 and P25 groups and were mainly enriched for amino acid metabolism and energy supply pathways. The 16 S rDNA data showed that PLA altered microbial richness and structural composition. Microbiota, classified into 34 genera and 63 species, were significantly altered after 25 mg/L PLA exposure (P < 0.05). Spearman's correlation results showed that Bifidobacterium catenulatum and Schaalia odontolytica played potentially vital roles during exposure, as they demonstrated stronger correlations with the significantly different metabolites than other bacterial species. In sum, PLA induced toxic effects on silkworms, especially on energy- and protein-relevant metabolism, but at high concentrations (25 mg/L). This prospective mechanistic investigation on the effects of PLA on larval toxicity provides novel insight regarding the ecological risks of biodegradable plastics in the environment.

Effects of land use on the distribution of soil microplastics in the Lihe River watershed, China

Soil contamination by microplastics (MPs) has gained widespread attention, whose fate may be influenced by land use types. The effects of land use types and the intensity of human activities on the distribution and sources of soil MPs at the watershed scale are unclear. In this study, 62 surface soil sites in representing five land use types (urban, tea garden, dryland, paddy field and woodland) and 8 freshwater sediment sites were investigated in the Lihe River watershed. MPs were detected in all samples, and the average abundance of soil and sediments was 401.85 ± 214.02 and 222.13 ± 54.66 items/kg, respectively. The soil MPs abundance followed the sequence: urban > paddy field > dryland > tea garden > woodland. Soil MP distribution and MP communities were significant different (p < 0.05) among land use types. The similarity of MP community highly correlated with geographic distance, and woodlands and freshwater sediments may be a potential fate for MPs in the Lihe River watershed. Soil clay, pH, and bulk density significantly correlated with MP abundance and fragment shape (p < 0.05). The positive correlation between population density, Total- Point of Interest (POI) and MP diversity indicates the importance of intensity of human activities in exacerbating soil MP pollution (p < 0.001). Plastic waste sources accounted for 65.12%, 58.60%, 48.15% and 25.35% of MPs in urban, tea garden, dryland and paddy field soils, respectively. Differences in the intensity of agricultural activities and cropping patterns were associated with different percentages of mulching film sources in the three types of agricultural soils. This study provides new ideas for the quantitative analysis of soil MP sources in different land use types.

Study on Properties and Degradation Behavior of Poly (Adipic Acid/Butylene Terephthalate-Co-Glycolic Acid) Copolyester Synthesized by Quaternary Copolymerization

At present, the development and usage of degradable plastics instead of traditional plastics is an effective way to solve the pollution of marine microplastics. Poly (butylene adipate-co-terephthalate) (PBAT) is known as one of the most promising biodegradable materials. Nevertheless, the degradation rate of PBAT in water environment is slow. In this work, we successfully prepared four kinds of high molecular weight polyester copolyesters (PBATGA) via quaternary copolymerization. The results showed that the intrinsic viscosity of PBATGA copolymers ranged from 0.74 to 1.01 dL/g with a glycolic acid content of 0–40%. PBATGA copolymers had excellent flexibility and thermal stability. The tensile strength was 5~40 MPa, the elongation at break was greater than 460%, especially the elongation at break of PBATGA10 at 1235%, and the thermal decomposition temperature of PBATGA copolyesters was higher than 375 °C. It was found that PBATGA copolyester had a faster hydrolysis rate than PBAT, and the weight loss of PBATGA copolymers showed a tendency of pH = 12 > Lipase ≈ pH = 7 > pH = 2. The quaternary polymerization of PBAT will have the advantage of achieving industrialization, unlike the previous polymerization process. In addition, the polymerization of PBATGA copolyesters not only utilizes the by-products of the coal chemical industry, but also it can be promising in the production of biodegradable packaging to reduce marine plastic pollution.