Metal(loid) bioaccessibility and inhalation risk assessment: A comparison between an urban and an industrial area

Sources, bioaccessibility and health risk of heavy metal(loid)s in the particulate matter of urban areas

Exposure to heavy metal(loid)s in airborne particulate matter (PM) could lead to various adverse health effects. The study investigated the total contents and the bioaccessibility of PM-bound heavy metal(loid)s (Cr, Mn, Co, Ni, Cu, Zn, As, Cd, and Pb), identified their potential sources, and evaluated the associated health risk via inhalation in eight typical cities in China (Nanjing, Mianyang, Huangshi, Nanchang, Kunming, Xiamen, Guangzhou, and Wuzhishan). The results showed that PM-bound Cr (VI) and As of all eight cities exceeded the limits of World Health Organization. The bioaccessibility of PM-bound heavy metal(loid)s exhibited large variations, with their means following the order of Cd > Mn > Co > Ni > Cu > Cr > As > Zn > Pb. Traffic and industrial emissions were identified as primary sources in most urban areas. The emission sources have important effects on the bioaccessibility of PM-bound heavy metal(loid)s. In particular, atmospheric Cu has its bioaccessibility significantly correlated with the contributions from traffic emissions. The bioaccessibility-based health risk assessment obtained different results from those using total contents, showing that the non-carcinogenic risks posed by most metal(loid)s were acceptable except for As in Huangshi and Nanchang. These findings highlight the source dependence of bioaccessibility of heavy metal(loid)s in airborne PM, facilitate the identification of priority pollution sources and enhance effective risk-oriented source regulatory strategies in urban areas.

Characterization of the inhalable fraction (< 10 μm) of soil from highly urbanized and industrial environments: magnetic measurements, bioaccessibility, Pb isotopes and health risk assessment

Soil in urban and industrial areas is one of the main sinks of pollutants. It is well known that there is a strong link between metal(loid)s bioaccessibility by inhalation pathway and human health. The critical size fraction is < 10 μm (inhalable fraction) since these particles can approach to the tracheobronchial region. Here, soil samples (< 10 μm) from a highly urbanized area and an industrialized city were characterized by combining magnetic measurements, bioaccessibility of metal(loids) and Pb isotope analyses. Thermomagnetic analysis indicated that the main magnetic mineral is impure magnetite. In vitro inhalation analysis showed that Cd, Mn, Pb and Zn were the elements with the highest bioaccessibility rates (%) for both settings. Anthropogenic sources that are responsible for Pb accumulation in < 10 μm fraction are traffic emissions for the highly urbanized environment, and Pb related to steel emissions and coal combustion in cement plant for the industrial setting. We did not establish differences in the Pb isotope composition between pseudo-total and bioaccessible Pb. The health risk assessment via the inhalation pathway showed limited non-carcinogenic risks for adults and children. The calculated risks based on pseudo-total and lung bioaccessible concentrations were identical for the two areas of contrasting anthropogenic pressures. Carcinogenic risks were under the threshold levels (CR < 10-4), with Ni being the dominant contributor to risk. This research contributes valuable insights into the lung bioaccessibility of metal(loids) in urban and industrial soils, incorporating advanced analytical techniques and health risk assessments for a comprehensive understanding.

Assessing health risks from bioaccessible PM2.5-bound toxic metals in Nanchang metro: Implications for metro workers and emissions control

High concentrations of PM2.5 with enriched levels of metallic constituents could significantly affect the health and comfort of metro employees. To avoid overestimating the exposure risks, we investigated the bioaccessibility of toxic metals (TMs) bound in PM2.5 from the Nanchang metro using Gamble's solution method, and qualitatively analyzed the impact of valence state and various sources on the bioaccessibility of TMs bound to PM2.5. The results showed that the bioaccessibility of the studied TMs ranged from 2.1% to 88.1%, with As, Ba, Co and Pb being the most bioaccessible and V, Fe and Cr being the less bioaccessible. The bioaccessibility of TMs in our subway PM2.5 samples varied based on their valence and species, showing higher valence states associated with increased bioaccessibility. Vehicle traffic, secondary aerosols and wheel/rail sources were found to be significantly and positively associated with the bioaccessibility of several TMs, implying a severe potential risk from these three sources. Although both non-carcinogenic and carcinogenic risks associated with total TMs were found to be high, only As and Cr(VI) posed a considerable carcinogenic risk to metro workers based on the bioaccessible fractions and were therefore priority pollutants. In addition, potential carcinogenic risk was found to be more severe in platform than that in ticket counter. The results indicate that considerable efforts are required to control and manage PM2.5 and the associated TMs in the Nanchang subway, particularly from traffic, wheel/rail and secondary sources, to protect the health of metro staff and the public.

Assessment of elemental chemistry, spatial distribution, and potential risks of road-deposited dusts in Sharjah, United Arab Emirates

Road dust is a major source of pollution in the environment, carrying different pollutants, including heavy metals and metalloids, from one location to another. This study assesses the concentrations of eight heavy metals and one metalloid (Zn, Pb, Mn, Fe, Cr, Cu, Cd, Ni, and As) in dust samples collected from sixty-eight streets of Sharjah, United Arab Emirates using ICP-OES, as well as investigates their effects on both the environment and humans. Mean concentrations of the elements in μg/g across the sites were 392 ± 46 (Zn), 68.28 ± 11.3 (Pb), 1437 ± 67 (Mn), 39,481 ± 4611 (Fe), 460 ± 31 (Cr), 150 ± 44 (Cu), 1.25 ± 0.65 (Cd), 856 ± 72 (Ni), and 0.97 ± 0.28 (As). The Cdeg and ERI calculated from the study were 54.79 and 573, respectively, suggesting varying pollution levels. The highest contributions were from Ni, Cd, Zn, Cu, Cr, and Pb, especially in areas with heavy traffic. The non-carcinogenic risk assessments were generally low for the three routes of exposure, except HQoral that was slightly higher for children. Similarly, none of the elements exhibited any carcinogenic risk except chromium. Overall, the cancer risk is considered low. In view of the limited studies from UAE in relation to the metal content of road-deposited dusts, the current study serves as novel knowledge, especially in the context of geographical areas with a higher occurrence of sandstorms and the presence of particulate matter. The study also adds to the global understanding of the contribution of street dust to environmental pollution and its implications for human health.

Multi-class organic pollutants in PM2.5 in mixed area of Shanghai: Levels, sources and health risk assessment

The occurrence of 25 multi-class pollutants comprising phthalate esters (PAEs), polycyclic aromatic hydrocarbons (PAHs), and synthetic musks (SMs) were studied in PM2.5 samples collected at an industrial/commercial/residential/traffic mixed area in Shanghai during four seasons. During the whole period, a slight exceedance of the PM2.5 annual limit was observed, with an average of 36.8 μg/m3, and PAEs were the most predominant, accounting for >70 % of the studied organic pollutants in PM2.5, followed by PAHs and SMs. Statistically significant differences were observed for the concentrations of PM2.5, PAEs, PAHs, and SMs in winter and summer. This seasonal variation could be derived from anthropogenic activities and atmospheric dynamics. Principal component analysis (PCA) and PAHs ratios suggested a mixed source mainly derived from vehicle emissions and industrial processes. Moreover, gaseous pollutants were also accounted for, indicating the emission of PAHs might accompany the NO2 emission process. Finally, inhalation of PM2.5-bound organic pollutants for carcinogenic and non-carcinogenic risks were estimated as average values for each season, showing outside the safe levels in autumn and winter in some cases, suggesting that new policies should be to developed to reduce their emissions and protect human health in this area.

Estimating the geographical patterns and health risks associated with PM2.5-bound heavy metals to guide PM2.5 control targets in China based on machine-learning algorithms

PM2.5 is the main component of haze, and PM2.5-bound heavy metals (PBHMs) can induce various toxic effects via inhalation. However, comprehensive macroanalyses on large scales are still lacking. In this study, we compiled a substantial dataset consisting of the concentrations of eight PBHMs, including As, Cd, Cr, Cu, Mn, Ni, Pb and Zn, across different cities in China. To improve prediction accuracy, we enhanced the traditional land-use regression (LUR) model by incorporating emission source-related variables and employing the best-fitted machine-learning algorithm, which was applied to predict PBHM concentrations, analyze geographical patterns and assess the health risks associated with metals under different PM2.5 control targets. Our model exhibited excellent performance in predicting the concentrations of PBHMs, with predicted values closely matching measured values. Noncarcinogenic risks exist in 99.4% of the estimated regions, and the carcinogenic risks in all studied regions of the country are within an acceptable range (1 × 10-5-1 × 10-6). In densely populated areas such as Henan, Shandong, and Sichuan, it is imperative to control the concentration of PBHMs to reduce the number of patients with cancer. Controlling PM2.5 effectively decreases both carcinogenic and noncarcinogenic health risks associated with PBHMs, but still exceed acceptable risk level, suggesting that other important emission sources should be given attention.

A multi-residue method for the analysis of organic pollutants released from atmospheric PM2.5 in simulated biological fluids: Inhalation bioaccessibility and bioavailability estimation

BACKGROUND

In recent decades, there has been a growing interest within the scientific community regarding the study of the fraction that could be released in simulated biological fluids to estimate in vitro bioaccessibility and bioavailability of compounds. Concerning particulate matter (PM), studies were essentially focused on metal (oid)s probably due to more complex methodologies needed for organic compounds, requiring extraction and pre-concentration steps from simulated fluids, followed by chromatographic analysis. Thus, the development of a simple and sensitive methodology for the analysis of multi-class organic compounds released in different inhalation simulated fluids would represent a great contribution to the field.

RESULTS

In this work, a methodology for the analysis of 49 organic pollutants, including 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 11 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols released in simulated fluids from PM2.5 samples was developed. After a physiologically based extraction test (PBET) by using artificial lysosomal fluid (ALF) and a simulated body fluid (SBF, filling a dialysis membrane) to obtain in vitro inhalation bioaccessible and bioavailable fractions, respectively; compounds were determined by a vortex-assisted liquid-liquid extraction (VALLE) and a subsequent analysis by programmed temperature vaporization-gas chromatography-tandem mass spectrometry (PTV-GC-MS/MS). Experimental conditions concerning VALLE extraction (extraction time and amount of NaCl (g)) were optimized by using a central composite design (CCD), best MS/MS transitions were selected and matrix-matched calibration combined with use of labelled subrogate standards provided high sensitivity, minimization of matrix effects and recovering losses compensation.

SIGNIFICANCE

The successful validation results obtained for most of the compounds demonstrated the effectiveness of the proposed methodology for the analysis of multi-class organic pollutants released in ALF and SBF for inhalation bioaccessibility and bioavailability assessment, respectively. Furthermore, applicability of the method was proved by analysing 20 p.m.2.5 samples, being the proposed in vitro PBET dialyzability approach for assessing organic pollutant's inhalation bioavailability applied to PM2.5 samples for the first time.

Oral and inhalation bioaccessibility of mercury in contaminated soils and potential health risk to the kidneys and neurodevelopment of children in Taiwan

Health risk assessments of exposure to mercury (Hg) from soils via ingestion and inhalation are indispensable for Taiwanese people living in the vicinity of Hg-contaminated sites. In this study, anthropogenic soils were collected from various polluted sources in Taiwan. In vitro oral and inhalation bioaccessible fractions of Hg were analyzed to avoid from overestimating the exposure risk. Discrepancies in oral and inhalation bioaccessible levels of Hg in soils were found using different in vitro assays with different pH levels and chemical compositions. The freshly contaminated soil (soil S7) polluted by chlor-alkali production activity sampled before the site was remediated had the highest total Hg concentration of 1346 mg/kg, with the highest oral bioaccessibility of 26.2% as analyzed by SW-846 Method 1340 and inhalation bioaccessibility of 30.5% as analyzed by modified Gamble's solution. The lesser extent of aging of Hg in soil S7 increased the Hg availability for humans, which was also found based on results of a sequential extraction procedure. Results of the hazard quotient showed that soil ingestion was the main pathway causing non-carcinogenic risks for children and adults. Children were also exposed to higher risks than were adults due to higher frequencies of hand-to-mouth behaviors and lower body weights. Furthermore, hazard index results adjusted for oral and inhalation bioaccessible Hg were lower than those obtained based on the total Hg content; however, an unacceptable value of the non-carcinogenic risk (> 1) for children living near soil S7 was still observed. This study suggests that children living near sites polluted for a short period of time may suffer potential renal effects regardless of the bioaccessibility. Our findings provide suggestions for decision makers on setting new strategies for managing risks of Hg-contaminated soils in Taiwan.

Oxidative stress indices induced by industrial and urban PM2.5-bound metals in A549 cells

The detrimental effects of atmospheric fine particulate matter (PM_2.5) on human health are of major global concern. PM_2.5-bound metals are toxic compounds that contribute to cellular damage. To investigate the toxic effects of water-soluble metals on human lung epithelial cells and their bioaccessibility to lung fluid, PM_2.5 samples were collected from both urban and industrial areas in the metropolitan city of Tabriz, Iran. Oxidative stress indices, including proline content, total antioxidant capacity (TAC), cytotoxicity, and DNA damage levels of water-soluble components of PM_2.5, were evaluated. Furthermore, an in vitro test was conducted to assess the bioaccessibility of various PM_2.5-bound metals to the respiratory system using simulated lung fluid. PM_2.5 average concentrations in urban and industrial areas were 83.11 and 97.71 μg/m³, respectively. The cytotoxicity effects of PM_2.5 water-soluble constituents from urban areas were significantly higher than in industrial areas and the IC₅₀ was found to be 96.76 ± 3.34 and 201.31 ± 5.96 μg/mL for urban and industrial PM_2.5 samples, respectively. In addition, higher PM_2.5 concentrations increased the proline content in a concentration-dependent manner in A549 cells, which plays a protective role against oxidative stress and prevents PM_2.5-induced DNA damage. Also, the partial least squares regression revealed that Be, Cd, Co, Ni, and Cr, were significantly correlated with DNA damage and proline accumulation, which caused cell damage through oxidative stress. The results of this study showed that PM_2.5-bound metals in highly polluted metropolitan city caused substantial changes in the cellular proline content, DNA damage levels and cytotoxicity in human lung A549 cells.

Environmental exposure to manganese and health risk assessment from personal sampling near an industrial source of airborne manganese

Manganese (Mn), despite being a trace element necessary in small quantities for the correct functioning of the organism, at higher concentrations can induce health disorders, mainly in motor and cognitive functions, even at levels found in non-occupational environments. For this reason, US EPA guidelines define safe reference doses/concentrations (RfD/RfC) for health. In this study, the individualised health risk of exposure to Mn through different media (air, diet, soil) and routes of entry into the organism (inhalation, ingestion and dermal absorption) was assessed according to the procedure defined by the US EPA. Calculations related to Mn present in ambient air were made on the basis of data obtained from size-segregated particulate matter (PM) personal samplers carried by volunteers recruited in a cross-sectional study conducted in the Santander Bay (northern Spain), where an industrial source of airborne Mn is located. Individuals residing in the vicinity of the main Mn source (within 1.5 km) were found to have a hazard index (HI) higher than 1, indicating that there is a potential risk for these subjects to develop health alterations. Also, people living in Santander, the capital of the region, located 7-10 km from the Mn source, may have some risk (HI > 1) under some wind conditions (SW). In addition, a preliminary study of media and routes of entry into the body confirmed that inhalation of PM_2.5-bound Mn is the most important route contributing to the overall non-carcinogenic health risk related to environmental Mn.

The new WHO air quality guidelines for PM2.5: predicament for small/medium cities

The global burden of disease estimated that approximately 7.1 million deaths worldwide were related to air pollution in 2016. However, only a limited number of small- and middle-sized cities have air quality monitoring networks. To date, air quality in terms of particulate matter is still mainly focused on mass concentration, with limited compositional monitoring even in mega cities, despite evidence indicating differential toxicity of particulate matter. As this evidence is far from conclusive, we conducted PM_2.5 bioaccessibility studies of potentially harmful elements in a medium-sized city, Londrina, Brazil. The data was interpreted in terms of source apportionment, the health risk evaluation and the bioaccessibility of inorganic contents in an artificial lysosomal fluid. The daily average concentration of PM_2.5 was below the WHO guideline, however, the chemical health assessment indicated a considerable health risk. The in vitro evaluation showed different potential mobility when compared to previous studies in large-sized cities, those with 1 million inhabitants or more (Curitiba and Manaus). The new WHO guideline for PM_2.5 mass concentration puts additional pressure on cities where air pollution monitoring is limited and/or neglected, because decision making is mainly revenue-driven and not socioeconomic-driven. Given the further emerging evidence that PM chemical composition is as, or even more, important than mass concentration levels, the research reported in the paper could pave the way for the necessary inter- and intra-city collaborations that are needed to address this global health challenge.

Inhalation bioacessibility and lung cell penetration of indoor PM2.5-bound PAEs and its implication in risk assessment

Several studies have evaluated the human exposure of phthalate esters (PAEs) in PM_2.5 via inhalation route, however, inhalation bioaccessibility and the lung cell penetration of PAEs were barely considered in risk assessment. In the present study, PM_2.5 samples collected from indoor environments were investigated for inhalation bioaccessibility of PAEs using two simulated lung fluids (gamble's solution (GMB) and artificial lysosomal fluid (ALF)). The results showed that the inhalation bioaccessibility of PAEs (except for diethyl phthalate) under healthy state (GMB: 8.9%-62.8%) was lower than that under the inflammatory condition (ALF: 14.5%-67.6%). Lung cell permeation and metabolism of three selected PAEs (diethyl phthalate, di(n-butyl)phthalate and di-2-ethylhexyl phthalate) was tested using equivalent lung cell (A549) model. The inhalation bioavailability obtained by combination of the bioaccessibility of PAEs in indoor PM_2.5 and permeability data of A549 cell ranged from 11.7% to 51.1% in health condition, and 13.5%-55.0% in inflammatory state. The calibration parameter (Fc) based on the inhalation bioavailability was established in present study and could provide a reference for a more accurate risk assessment of PM_2.5-bound PAEs.

Combining DGT with bioaccessibility methods as tool to estimate potential bioavailability and release of PTEs in the urban soil environment

Potentially toxic elements (PTEs) in urban soil environments pose a noticeable risk to both ecosystem and human health; however, only a fraction of the elemental content is available for biota. To better know the potential risk of PTEs in the urban soil environment, geochemical fractionation, bioaccessibility, and potential bioavailability of four PTEs (Cd, Cu, Pb, and Zn) were investigated by the combined use of different methods. The results showed that a high non-residual chemical fraction is related to a high bioavailability of the selected elements. The ranges of labile concentration of Cu, Zn, Cd and Pb in all sampling sites measured by diffusive gradients in thin films (DGT) were 3.5-18.0, 14.2-26.5, 0.09-1.0, and 1.8-15.7 μg/L, respectively. The high non-residual contents pointed out a serious hazard to the urban environment. The bioaccessible concentrations in gastric and lung phases were closely positively correlated with DGT-measured content (r = 0.63-0.99, p < 0.05), suggesting the potential use of DGT for the prediction of PTEs risk to human health. Moreover, the correlation of DGT results with the soluble and reducible fractions of PTEs may allow DGT use for quick screenings of the PTEs fraction potentially mobilizable during flooding events in urban soil environments. Our study suggests that combing DGT, bioaccessibility and biogeochemical fractionation could provide a more accurate assessment of the urban environmental quality and be helpful for pollution control and urban planning.

In-vitro inhalation bioavailability estimation of Metal(oid)s in atmospheric particulate matter (PM2.5) using simulated alveolar lysosomal fluid: A dialyzability approach

A novel in-vitro method, by using synthetic body fluids, human physiological conditions and a simulated air-blood barrier (by using a dialysis membrane) has been developed and applied to assess in-vitro inhalation bioavailability of metal(oid)s associated to particulate matter (PM_2,5) samples collected from an industrial site of the Northwest of Spain. A validated analytical methodology based on inductively coupled plasma mass spectrometry (ICP-MS) was used to analyse metal(oid)s concentrations in bioavailable fractions. This approach would be a more realistic human health risk assessment since considering processes that occur in human body in contrast the overestimation derived from current models (which consider environmental concentrations). Metal(oid)s such as Cu and Mo seemed to be the most bioavailable (mean in-vitro bioavailability ratios higher than 70%); Ba, Cd, Mn, Pb, Rb, Sb, Sn, V and Zn shown mean ratios between 20 and 60%, while low in-vitro bioavailability ratios (less than 20%) were observed for metal(oid)s such as Al, Co, Cr, Fe, Ni, Ti, and Tl. Health risk assessment via inhalation based on hazard carcinogenic and non-carcinogenic indexes (HI_c and HI_nc, respectively) were performed considering three exposure scenarios using both inhalation bioavailable and total metal(oid)s concentrations in PM_2.5 samples, suggesting no risk to human health. The influence of chemical composition on in-vitro bioavailability ratios was obtained, pointing out that inhalation ratios of Al, Ba, Cr, Cu, Fe, Ni, Pb and V seem to be affected by sea salt and/or crustal and/or biogenic and/or anthropogenic content of PM_2.5.

Short- and long-term exposure to trace metal(loid)s from the production of ferromanganese alloys by personal sampling and biomarkers

The environmental exposure to trace metal(loid)s (As, Cd, Cu, Fe, Mn, Pb, and Zn) was assessed near a ferromanganese alloy plant using filters from personal particulate matter (PM) samplers (bioaccessible and non-bioaccessible fine and coarse fractions) and whole blood as short-term exposure markers, and scalp hair and fingernails as long-term biomarkers, collected from volunteers (n = 130) living in Santander Bay (northern Spain). Bioaccessible and non-bioaccessible metal(loid) concentrations in coarse and fine PM from personal samplers were determined by ICP-MS after extraction/digestion. Metal(loid) concentration in biomarkers was measured after alkaline dilution (whole blood) and acid digestion (fingernails and scalp hair) by ICP-MS as well. Results were discussed in terms of exposure, considering the distance to the main Mn source, and sex. In terms of exposure, significant differences were found for Mn in all the studied fractions of PM, As in whole blood, Mn and Cu in scalp hair and Mn and Pb in fingernails, with all concentrations being higher for those living closer to the Mn source, with the exception of Cu in scalp hair. Furthermore, the analysis of the correlation between Mn levels in the studied biomarkers and the wind-weighted distance to the main source of Mn allows us to conclude that scalp hair and mainly fingernails are appropriate biomarkers of long-term airborne Mn exposure. This was also confirmed by the significant positive correlations between scalp hair Mn and bioaccessible Mn in coarse and fine fractions, and between fingernails Mn and all PM fractions. This implies that people living closer to a ferromanganese alloy plant are exposed to higher levels of airborne metal(loid)s, mainly Mn, leading to higher levels of this metal in scalp hair and fingernails, which according to the literature, might affect some neurological outcomes. According to sex, significant differences were observed for Fe, Cu and Pb in whole blood, with higher concentrations of Fe and Pb in males, and higher levels of Cu in females; and for Mn, Cu, Zn, Cd and Pb in scalp hair, with higher concentrations in males for all metal(loid)s except Cu.

Multi-class organic pollutants in atmospheric particulate matter (PM2.5) from a Southwestern Europe industrial area: Levels, sources and human health risk

The occurrence of 50 multi-class pollutants comprising 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 12 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols was studied in atmospheric particulate matter (PM_2.5) samples collected at an industrial area focused on automotive manufacturing located at the Southwestern Atlantic European region (Vigo city, Spain) during 1-year period. Among all quantitated pollutants in PM_2.5 samples, bisphenol A (BPA) was the most predominant with an average concentration of 6180 pg m^-3, followed by PAHs comprising benzo(b+j)fluoranthene (BbF + BjF) and benzo(g,h,i)perylene (BghiP), accounting for 546 pg m^-3 and 413 pg m^-3 respectively. In addition, two OPFRs concerning tris(chloropropyl) phosphate (TCPP) and triphenyl phosphine oxide (TPPO) were the next following the concentration order, accounting for 411 pg m^-3 and 367 pg m^-3 respectively; being butyl benzyl phthalate (BBP) the most profuse PAE (56.1 pg m^-3 by average). High relative standard deviations (RSDs) were observed during the whole sampling period, while statistically significant differences were only observed for PAHs concentrations during cold and warm seasons. Furthermore, some water-soluble ions and metal(oid)s were analysed in PM_2.5 samples to be used as PM source tracers, whose concentrations were quite below the target levels set in the current legislation. Data obtained from principal component analysis (PCA) and PAHs molecular indices suggested a pyrogenic and petrogenic origin for PAHs, whereas occurrence of the remaining compounds seems to be attributed to resources used in the automotive industrial activity settled in the sampling area. Moreover, although a substantial anthropogenic source to PM_2.5 in the area was observed, marine and soil resuspension contributions were also accounted. Finally, carcinogenic and non-carcinogenic risks posed by PM_2.5-bound pollutants inhalation were assessed, being both averages within the safe level considering the whole period.

Novel insights into probabilistic health risk and source apportionment based on bioaccessible potentially toxic elements around an abandoned e-waste dismantling site

The study of potentially toxic element (PTE) hazards around e-waste recycling areas has attracted increasing attention but does not consider elemental bioaccessibility. Here, the respiratory and oral bioaccessibilities were incorporated into probabilistic health risk evaluation and source contribution apportionment. The results showed that soil Cd yielded the highest respiratory and oral bioaccessibility, whereas Cr in soils and vegetables attained the lowest oral bioaccessibility. When incorporating metal bioaccessibility into health risk assessment, a 48.3%-55.7% overestimation of non-cancer and cancer risks can be avoided relative to the risk assessment based on the total concentrations of PTEs. More importantly, priority control metals were misidentified without consideration of bioaccessibility. Cadmium, As, and Cr were screened as the priority metal(loid)s for targeted risk control based on the total PTEs, whereas Cd, Zn, and Cu were the priority metal(loid)s based on the bioaccessible PTEs. Furthermore, source apportionment revealed that >50% of oral bioaccessible Cd, Cu, Ni, Pb, and Zn in farmland were contributed by e-waste dismantling activities, whereas bioaccessible As and Cr mainly originated from agrochemical applications and natural sources, respectively. This study emphasizes the refinement of risk estimation and source apportionment through metal bioaccessibility adjustment, which facilitates the realistic assessment of adverse health effects in humans and the precise identification of high-risk sources.

Inhalation bioaccessibility of multi-class organic pollutants associated to atmospheric PM2.5: Correlation with PM2.5 properties and health risk assessment

Inhalation exposure to fine particulate matter (PM_2.5) represents a global concern due to the adverse effects in human health. In the last years, scientific community has been adopted the assessment of the PM_2.5-bound pollutant fraction that could be released (bioaccessible fraction) in simulated lung fluids (SLFs) to achieve a better understanding of PM risk assessment and toxicological studies. Thus, bioaccessibility of 49 organic pollutants, including 18 polycyclic aromatic hydrocarbons (PAHs), 12 phthalate esters (PAEs), 11 organophosphorus flame retardants (OPFRs), 6 synthetic musk compounds (SMCs) and 2 bisphenols in PM_2.5 samples was evaluated. The proposed method consists of a physiologically based extraction test (PBET) by using artificial lysosomal fluid (ALF) to obtain bioaccessible fractions, followed by a vortex-assisted liquid-liquid microextraction (VALLME) and a final analysis by programmed temperature vaporization-gas chromatography-tandem mass spectrometry (PTV-GC-MS/MS). The highest inhalation bioaccessibility ratio was found for bisphenol A (BPA) with an average of 83%, followed by OPFRs, PAEs and PAHs (with average bioaccessibilities of 68%, 41% and 34%, respectively). Correlations between PM_2.5 composition (major ions, trace metals, equivalent black carbon (eBC) and UV-absorbing particulate matter (UVPM)) and bioaccessibility ratios were also assessed. Principal Component Analysis (PCA) suggested that PAHs, PAES and OPFRs bioaccessibility ratios could be positively correlated with PM_2.5 carbonaceous content. Furthermore, both inverse and positive correlations on PAHs, PAEs and OPFRs bioaccessibilites could be accounted for some major ions and metal (oid)s associated to PM_2.5, whereas no correlations comprising considered PM_2.5 major ions and metal (oid)s contents and BPA bioaccessibility was observed. In addition, health risk assessment of target PM_2.5-associated PAHs via inhalation was assessed in the study area considering both total and bioaccessible concentrations, being averaged human health risks within the safe carcinogenic and non-carcinogenic levels.

Seasonal variation of dissolved bioaccessibility for potentially toxic elements in size-resolved PM: Impacts of bioaccessibility on inhalable risk and uncertainty

The health effects of potentially toxic elements (PTEs) in airborne particulate matter (PM) are strongly dependent on their size distribution and dissolution. This study examined PTEs within nine distinct sizes of PM in a Chinese megacity, with a focus on their deposited and dissolved bioaccessibility in the human pulmonary region. A Multiple Path Particle Dosimetry (MPPD) model was used to estimate the deposited bioaccessibility, and an in-vitro experiment with simulated lung fluid was conducted for dissolved bioaccessibility. During the non-heating season, the dissolved bioaccessible fraction (DBF) of As, Cd, Co, Cr, Mn, Pb and V were greater in fine PM (aerodynamics less than 2.1 μm) than in coarse PM (aerodynamics between 2.1 and 10 μm), and vice versa for Ni. With the increased demand of heating, the DBF of Pb and As decreased in fine particle sizes, probably due to the presence of oxide/silicate compounds from coal combustion. Inhalation health risks based on the bioaccessible concentrations of PTEs displayed the peaks in <0.43 μm and 2.1-3.3 μm particulate sizes. The non-cancer risk was at an acceptable level (95th percentiles of hazard index (HI) was 0.49), but the cancer risk exceeded the threshold value (95th percentiles of total incremental lifetime cancer risk (TCR) was 8.91 × 10^-5). Based on the results of uncertainty analysis, except for the exposure frequency, the total concentrations and DBF of As and Cr in <0.43 μm particle size segment have a greater influence on the uncertainty of probabilistic risk.

Inhalation Bioaccessibility and Risk Assessment of Metals in PM2.5 Based on a Multiple-Path Particle Dosimetry Model in the Smelting District of Northeast China

PM2.5 can deposit and partially dissolve in the pulmonary region. In order to be consistent with the reality of the pulmonary region and avoid overestimating the inhalation human health risk, the bioaccessibility of PM2.5 heavy metals and the deposition fraction (DF) urgently needs to be considered. This paper simulates the bioaccessibility of PM2.5 heavy metals in acidic intracellular and neutral extracellular deposition environments by simulating lung fluid. The multipath particle dosimetry model was used to simulate DF of PM2.5. According to the exposure assessment method of the U.S. Environmental Protection Agency, the inhalation exposure dose threshold was calculated, and the human health risk with different inhalation exposure doses was compared. The bioaccessibility of heavy metals is 12.1−36.2%. The total DF of PM2.5 in adults was higher than that in children, and children were higher than adults in the pulmonary region, and gradually decreased with age. The inhalation exposure dose threshold is 0.04−14.2 mg·kg−1·day−1 for the non-carcinogenic exposure dose and 0.007−0.043 mg·kg−1·day−1 for the carcinogenic exposure dose. Cd and Pb in PM2.5 in the study area have a non-carcinogenic risk to human health (hazard index < 1), and Cd has no or a potential carcinogenic risk to human health. A revised inhalation health risk assessment may avoid overestimation.

Health risk of fluorine in soil from a phosphorus industrial area based on the in-vitro oral, inhalation, and dermal bioaccessibility

Health risk of F in soil is of special concern due to the continuously elevated concentration of F in soil. However, there is still a dearth of risk assessments of F in soil based on in-vitro bioaccessibility posed by multiple exposure routes. Herein, the oral, inhalation, and dermal bioaccessibility of F in soil was firstly obtained by adapting and combining in-vitro methods, which then was introduced to remedy an information gap of a comprehensive risk of F in soil posed by a multi-exposure pathway. Combined in-vitro tests indicate the oral, inhalation, and dermal bioaccessibility of F was 13.15 ± 2.63%, 16.55 ± 2.63%, and 1.27 ± 0.73%, respectively. Plasma yielded a detoxic potential for the absorbed F after digesting in small intestine, while effects of enzymes, sweat, and food on the oral bioaccessibility of F were insignificant. Different with metals, the major dissolving phase of F was the interstitial fluid in the deep lung instead of in the alveolar macrophages intracellular environment. A potentially major release of F in the exocrine sweat was noted than in the apocrine sweat. Risk assessments based on the daily exposure incorporated with the in-vitro bioaccessibility suggested that compared with inhalation and dermal contact, oral ingestion was the main exposure route of F in soil to human. Present findings provide insights into the bioaccessibility and health risk of F in soil by multiple exposure routes, which are crucial for the risk control of F contamination in soil.

Poorer cognitive function and environmental airborne Mn exposure determined by biomonitoring and personal environmental monitors in a healthy adult population

BACKGROUND/AIM

In the Santander Bay (Cantabria, northern Spain), a ferromanganese alloy plant is located. Our objective was to characterize the Mn personal exposure of adult healthy volunteers living in this highly Mn exposed region, and to determine its association with a poorer cognitive function.

METHODS

Cross-sectional study analyzing 130 consecutive participants. Cognitive function was assessed by Stroop Color Word, Verbal Fluency tests, Trail Making Test (TMT), Digit Span (WAIS III) and Rey Osterrieth Complex Figure (ROCF) tests and crude scores were standardized according to NEURONORMA norms. Exposure to Mn was assessed in terms of source distance, by Personal Environmental Monitors (PEMs) allowing the separation of fine (PM2.5) and coarse (PM10-2.5) particles (obtaining the bioaccessible fraction by in-vitro bioaccessibility tests), and by biomarkers (blood, hair and fingernails). Age, sex, study level and number of years of residence were predefined as confounding variables and adjusted Mean Differences (MDs) were obtained.

RESULTS

Statistically significant lower scores (negative MDs) in all test were observed when living near the industrial emission source, after adjusting for the predefined variables. Regarding PEMs results, statistically significant lower scores in all Stroop parts were obtained in participants with higher levels of Total Mn in All fractions (PM10). For Verbal Fluency tests, negative MDs were obtained for both bioaccessible fractions. Digit Span Backward scores were lower for those with higher levels in the bioaccessible coarse fraction, and negative MDs were also observed for the ROCF Delayed part and the non-bioaccessible fine fraction. As regards to Mn in fingernails, adjusted MDs of -1.60; 95%CI (-2.57 to -0.64) and -1.45; 95%CI (-2.29 to -0.61) for Digit Span Forward and Backward parts were observed.

CONCLUSIONS

Our results support an association between poorer cognitive function and environmental airborne Mn exposure.

Comparison of oxidative potential of PM1 and PM2.5 urban aerosol and bioaccessibility of associated elements in three simulated lung fluids

PM1 and PM2.5 aerosol samples collected during four seasons were analysed for bioaccessibility of 21 elements and oxidative potential (OP) determined by the dithiothreitol (DTT) assay in three simulated lung fluids (SLFs): deionised water, simulated alveoli fluid and Gamble's solution. Most elements had higher bioaccessibility in the submicron fraction than in the fine size fraction. The bioaccessibility of the element not only depends on the aerosol size fraction, but also varies between the three SLFs. In addition, the bioaccessibility of elements depends on both their chemical compound and the composition of the SLF. A very high bioaccessibility (up to 98%) was observed for As, Sb and Cd in all studied SLFs. The lowest bioaccessibility was observed for Ti, Al and Fe. The OP of urban particulate matter (PM), was studied as a relevant metric for health effects. The difference of OP value in simulated alveoli fluid and Gamble's solution compared to deionised water indicate the crucial effect of individual SLFs' composition on the OP. The complexation of elements with different ligands present in the solution can influence OP_DTT depletion and, therefore, the potential health effects of inhaled aerosol. The correlation coefficients between total or bioaccessible concentrations of studied elements and volume normalised OP were calculated to examine the relationship between the elements and the OP. The strong positive correlations between some elements (i.e. Cd, Pb, As, Zn, Sn, Cu, Co, Ni, Mn) and DTT activity suggest their participation in the oxidative activity of PM.

Biomonitoring and bioaccessibility of environmental airborne manganese in relation to motor function in a healthy adult population

BACKGROUND/AIM

Santander, the capital of Cantabria, Spain (172,000 inhabitants) is 7 km from an industrial emission source (IES) of Mn located in a 10,000 inhabitants town (Maliaño) (annual air Mn arithmetic mean = 231.8 ng/m³; reference WHO guideline = 150 ng/m³). Our objective was to compare the motor function of adult healthy volunteers living in both places.

METHODS

Cross-sectional study analyzing 130 consecutive participants. Exposure to Mn was assessed in terms of source distance from the IES, by Personal Environmental Monitors (PEMs) carried for 24 h by participants consisting of a portable impactor connected to a personal pump, and by biomarkers (blood, hair and fingernails). The impactor allowed the separation of fine (PM2.5) and coarse (PM10-2.5) particles and for each particle size in-vitro bioaccessibility tests with biologically active fluids were performed to separate the soluble (bioaccessible) from the insoluble (non-bioaccessible) fraction. Mean Differences (MDs) adjusted for age, sex, and study level, were obtained for motor function tests results.

RESULTS

Regarding Grooved Pegboard, overall mean time to complete the test was 59.31 and 65.27 seconds (Standard Deviation = 10.11 and 11.69) for dominant and nondominant hands respectively. Statistically significant higher times (indicating worse function) were observed when living near the IES in both hands but MDs of only 1.22 and 2.05 seconds were obtained after adjusting for the predefined confounders (p = 0.373 and 0.221 respectively). Regarding Mn levels in their PEMs (in both bioaccessible and non-bioaccessible coarse&fine fractions) higher times were computed in participants with higher levels for the bioaccessible-fine fraction, with a MD that diminished but still yielded statistical significance after controlling for confounding: adjusted MD = 3.01 more seconds; 95%CI (0.44-5.38), p = 0.022. Poorer results were also observed for fingernails levels. Regarding Finger Tapping Test, no statistically significant differences were found with the exception of Mn fingernails levels.

CONCLUSIONS

Our results suggest poorer motor function as assessed by Grooved Pegboard test in relation to "proximity to IES", "bioaccessible-fine fraction as determined by PEMs and "Mn fingernails levels". However, our findings were affected by confounding, and only the adjusted MD for the Mn bioaccessible-fine fraction remained of sufficient magnitude to maintain statistical significance.

Health risk assessment via ingestion and inhalation of soil PTE of an urban area

Potentially Toxic Elements (PTE) are common soil contaminants and pose a significant risk to human health. In this study, ingestion (<150 μm) and inhalation (<10 μm) bioaccessibility and human health risk due to PTE were investigated in soils of the urban and peri-urban area of Torino. Lead, Cd, Cu, and Zn were observed to be the most soluble elements in simulated gastric and lung fluids. Higher bioaccessible concentrations of Pb, Ni, Co and Sb were observed in the inhalable size fraction (<10 μm) compared to ingestible one probably because of the higher concentration in fine soil size fraction. Conversely, the relative bioaccessibility of Pb, Cu, Cd, Zn and As was lower, due to the different extracting conditions and to the presumable different elemental speciation. Average values suggested that PTE would be more bioavailable if ingested than inhaled, particularly in urban areas, were the bioaccessible percentages were always higher than in peri-urban sites. Health risk assessment was conducted using bioaccessible concentrations and their corresponding toxicities via ingestion and inhalation exposures. Unacceptable non-carcinogenic risk (HQ > 1) was found through ingestion exposure for children in some urban sites and Pb was the most hazardous elements. Carcinogenic risks were under the threshold levels for every soil (CR < 10^-4), with Cr and As being the dominant contributors to risk. Therefore, necessary soil remediation activities are needed to reduce the risks of human, especially for children, exposure to Pb.

Human Health Risk Assessment of Heavy Metals in the Urban Road Dust of Zhengzhou Metropolis, China

The goal of this research is to assess hazardous heavy metal levels in PM2.5 fractioned road dust in order to quantify the risk of inhalation and potential health effects. To accomplish this, Inductively Coupled Plasma Mass Spectroscopy (ICP-MS) was used to determine concentrations of eight heavy metals (Cr, Cu, Ni, Zn, Cd, As, Pb, and Hg) in the PM2.5 portion of road dust samples from five different land use areas (commercial, residential, industrial, parks, and educational) in Zhengzhou, China. The following were the average heavy metal concentrations in the city: Cr 46.26 mg/kg, Cu 25.13 mg/kg, Ni 12.51 mg/kg, Zn 152.35 mg/kg, Cd 0.56 mg/kg, As 11.53 mg/kg, Pb 52.15 mg/kg, and Hg 0.32 mg/kg. Two pollution indicators, the Pollution Index (PI) and the Geoaccumulation Index (Igeo), were used to determine the degree of contamination. Both PI and Igeo indicated the extreme pollution of Hg and Cd, while PI also ranked Zn in the extreme polluted range. The US Environmental Protection Agency (USEPA) model for adults and children was used to estimate health risks by inhalation. The results identified non-carcinogenic exposure of children to lead (HI > 0.1) in commercial and industrial areas. Both children and adults in Zhengzhou’s commercial, residential, and park areas are exposed to higher levels of copper (Cu), lead (Pb), and zinc (Zn).

Physicochemical Properties of Indoor and Outdoor Particulate Matter 2.5 in Selected Residential Areas near a Ferromanganese Smelter

Particulate matter (PM) of different sizes and elemental composition is a leading contributor to indoor and outdoor air pollution in residential areas. We sought to investigate similarities between indoor and outdoor PM_2.5 in three residential areas near a ferromanganese smelter in Meyerton to apportion the emission source(s). Indoor and outdoor PM_2.5 samples were collected concurrently, using GilAir300 plus samplers, at a flow rate of 2.75 L/min. PM_2.5 was collected on polycarbonate membrane filters housed in 37 mm cassettes coupled with PM_2.5 cyclones. Scanning electron microscopy coupled with energy-dispersive spectroscopy was used to study the morphology, and inductively coupled plasma-mass spectroscopy was used to analyse the elemental composition of the PM_2.5. Mean indoor and outdoor PM_2.5 mass concentrations were 10.99 and 24.95 µg/m³, respectively. Mean outdoor mass concentration was 2.27-fold higher than the indoor concentration. Indoor samples consisted of irregular and agglomerated particles, ranging from 0.09 to 1.06 µm, whereas outdoor samples consisted of irregular and spherical particles, ranging from 0.10 to 0.70 µm. Indoor and outdoor PM_2.5 were dominated by manganese, silicon, and iron, however, outdoor PM_2.5 had the highest concentration of all elements. The ferromanganese smelter was identified as the potential main contributing source of PM_2.5 of different physicochemical properties.

Bioaccessibility and public health risk of heavy Metal(loid)s in the airborne particulate matter of four cities in northern China

Atmospheric coarse particulate matter (PM₁₀) enriched with heavy metal(loid)s could pose potentially significant health risk to humans, while accurate health risk assessment calls for characterization of their bioaccessibility, besides the total contents. The health risk of major toxic heavy metal(loid)s in the PM₁₀ from four large cities in northern China via inhalation was investigated based on their total contents and bioaccessibility. The annual mean concentrations of PM-bound Zn, As, Pb, and Mn in the atmosphere of the four cities were 650, 305, 227, and 177 ng⋅m^-3, respectively. The levels of heavy metal(loid)s in the PM₁₀ were generally higher in winter but lower in summer in all four cities, which resulted primarily from the emissions associated with coal combustion for district and household heating and the unfavorable meteorological conditions in winter. The bioaccessibility of heavy metal(loid)s in the PM₁₀ ranged from 0.9 to 48.7%, following the general order of Mn > Co > Ni > Cd > Cu > As > Cr > Zn > Pb. Based on their total contents in the PM₁₀, most heavy metal(loid)s posed significant public health risk via inhalation exposure in the four cities. However, after accounting for the bioaccessibility of metal(loid)s, the non-carcinogenic risk of most metal(loid)s was negligible, except for As in the PM₁₀ of Jinzhong, while only the carcinogenic risk posed by Cr and As in the PM₁₀ exceeded the acceptable level. These findings demonstrate the importance of characterizing the bioaccessibility of airborne PM-bound heavy metal(loid)s in health risk assessment and could guide the on-going efforts on reducing the public health risk of PM₁₀ in northern China.

In vitro assessments of bioaccessibility and bioavailability of PM2.5 trace metals in respiratory and digestive systems and their oxidative potential

Air pollution is a serious environmental issue. As a key aerosol component, PM_2.5 associated toxic trace metals pose significant health risks by inhalation and ingestion, but the evidences and mechanisms were insufficient and not well understood just by their total environmental concentrations. To accurately assess the potential risks of airborne metals, a series of in vitro physiologically based tests with synthetic human lung and gastrointestinal fluids were conducted to assess both the bioaccessibility and bioavailability of various PM_2.5 bound metals in the respiratory and digestive systems from both urban and industrial areas of Nanjing city. Moreover, the chemical acellular toxicity test [dithiothreitol (DTT) assay] and source analysis were performed. Generally, the bioaccessibility and bioavailability of investigated metals were element and body fluid dependent. Source oriented metals in PM_2.5 showed diverse bioaccessibility in different human organs. The PM_2.5 induced oxidative potential was mainly contributed by the bioaccessible/bioavailable transition metals such as Fe, Ni and Co from metallurgic dust and traffic emission. Future researches on the toxicological mechanisms of airborne metals incorporating the bioaccessibility, bioavailability and toxicity tests are directions.

Distribution, bioaccessibility, and health risk assessment of heavy metals in PM2.5 and PM10 during winter heating periods in five types of cities in Northeast China

PM_2.5 and PM₁₀ samples were collected from the outdoor environment of five types of cities (provincial central cities, regional central cities, resource-based cities, agricultural cities, and forested cities) situated in Northeast China. Based on bioaccessibility and respiratory deposition fluxes, health risks of PM_2.5- and PM₁₀-bound six heavy metals [HM₆: Arsenic (As), Chromium (Cr), Cadmium (Cd), Nickel (Ni), Cobalt (Co), and Lead (Pb)] were studied. Cobalt (Co) and Cr were found to be the most abundantly bioaccessible fraction among HM₆ after extraction of simulated lung fluids. After inhalation exposure, among HM_6, Co mainly contributed 88.39-93.19% to the non-carcinogenic risk, while Cr account for 82.92-93.72% of cancer risk. The estimated daily intake of bioaccessible HM₆ in outdoor environment during the heating period was calculated to be 293.11 ± 121.03, 117.08 ± 32.46, 105.57 ± 32.49, 100.35 ± 25.58 and 83.11 ± 17.64 ng/h for provincial central cities, regional central cities, agricultural city, resource-based cities and forested cities, respectively, for local residents. During the heating period of 180 days, non-carcinogenic risks (As, Cr, Cd, Ni, Co) in outdoor environment of 0.5 residence time were below the safety threshold (HQ < 1). Cancer risks for Cr and Co were above 10^-5 in the five types of cities, but in the assumable range (< 10^-4). Our study highlighted the wide range of measures needed to cut airborne particles pollution to safer levels.

Simulated biological fluids - a systematic review of their biological relevance and use in relation to inhalation toxicology of particles and fibres

The use of simulated biological fluids (SBFs) is a promising in vitro technique to better understand the release mechanisms and possible in vivo behaviour of materials, including fibres, metal-containing particles and nanomaterials. Applications of SBFs in dissolution tests allow a measure of material biopersistence or, conversely, bioaccessibility that in turn can provide a useful inference of a materials biodistribution, its acute and long-term toxicity, as well as its pathogenicity. Given the wide range of SBFs reported in the literature, a review was conducted, with a focus on fluids used to replicate environments that may be encountered upon material inhalation, including extracellular and intracellular compartments. The review aims to identify when a fluid design can replicate realistic biological conditions, demonstrate operation validation, and/or provide robustness and reproducibility. The studies examined highlight simulated lung fluids (SLFs) that have been shown to suitably replicate physiological conditions, and identify specific components that play a pivotal role in dissolution mechanisms and biological activity; including organic molecules, redox-active species and chelating agents. Material dissolution was not always driven by pH, and likewise not only driven by SLF composition; specific materials and formulations correspond to specific dissolution mechanisms. It is recommended that SLF developments focus on biological predictivity and if not practical, on better biological mimicry, as such an approach ensures results are more likely to reflect in vivo behaviour regardless of the material under investigation.

Respiratory bioaccessibility and solid phase partitioning of potentially harmful elements in urban environmental matrices

Studies regarding the role of geochemical processes in urban environmental matrices (UEM) and their influence on respiratory bioaccessibility in humans are scarce in humid tropical regions, especially in Brazil. Contaminated UEM are potentially hazardous to humans if particles <10 μm in diameter are inhaled and reach the tracheobronchial region. In this study, we evaluated samples collected in Brazilian UEMs with a large environmental liability left by former mining industries and in a city with strong industrial expansion. UEM samples were classified into soil, sediment and mine tailings according to the characteristics of the collection sites. The respiratory bioaccessibility of potentially harmful elements (PHE) was evaluated using artificial lysosomal fluid (ALF, pH 4.5), and the BCR-sequential extraction was performed to evaluate how the respiratory bioaccessibility of the PHE was related to the solid phase partitioning. The bioaccessible fraction (BAF) ranged from 54 to 98% for Cd; 21-89% for Cu; 46-140% for Pb, 35-88% for Mn and; 41-84% for Zn. The average BAF of the elements decreased in the following order: Soil: Cd > Pb > Mn > Zn > Cu; Tailing: Pb > Cd > Zn > Mn > Cu; and Sediments: Pb > Mn > Cd > Zn > Cu. BCR-fractions were useful to predict the PHE bioaccessibility (R² = 0.79-0.98), thus suggesting that particle geochemistry and mineralogy can influence PHE behaviour in the pulmonary fluid. Therefore, this approach provides a combination of quantitative and qualitative data, which allows us to carry out a more realistic assessment of the current situation of the potentially contaminated site and possible alternatives for decision making by the stakeholders.

Metal(loid) bioaccessibility of atmospheric particulate matter from mine tailings at Zimapan, Mexico

Metal(loid)s are contaminants of concern emitted as particulate matter (PM) from several pollution sources. The objective was to characterize potential exposure from local airborne metal(loid)s in a community in proximity to mine tailings. Air samples were collected weekly at five sites around the municipal mine tailings using two Hi-volume samplers for simultaneously collecting PM10 and PM2.5. Total suspended particulates (TSP), concentrations, speciation, and bioaccessibility of metal(loid)s were quantified. The size and form of particles were determined by scanning electron microscopy. The concentration of TSP (μg m-3) in the airborne samples ranged from 21.2 to 64.6 for PM2.5 and 23.6 to 80.1 for PM10. The profiles of analyzed quasi-total metal(loid) concentration from all sampling sites were similar between these aerosols PM sizes except at site 2 for Cd, at site 3 for Cu, and site 4 for Zn. The order of quasi-total metal(loid) concentration, in the airborne samples for both PM sizes, was As > Zn > Fe > Pb > Cu > Mn > Cd. As speciation included As-sulfite, As(III)-O, and As(V)-O with less concentration of As(III)-O in both PM sizes. Bioaccessible metal(loid) concentrations were very high and represented a great percentage from the quasi-total airborne concentrations, for instance, 10% and 37% for Pb and 8% and 6% for As in pulmonary and gastric bioaccessible concentrations, respectively. Knowing the toxic effects of these pollutants, there is an urgent need to establish environmental regulation of bioaccessible pollutant concentrations from PM dislodged from uncovered metal(loid) mine tailings affecting not only nearby human populations but also possible long-distance ecosystem transport.

Understanding how methodological aspects affect the release of trace metal(loid)s from urban dust in inhalation bioaccessibility tests

The bioaccessibility of metal(loid)s in ambient particulate matter (PM) has been recently used to represent the risk of inhalation exposure. Nevertheless, different methodological factors affect the bioaccessibility values; among these, the type and composition of surrogate biological fluids and the liquid to solid ratio have been revealed to be the most important. To better understand how these methodological aspects affect the bioaccessibility, a reference material corresponding to urban dust (SRM1648a) was contacted with synthetic biological fluids commonly used in the literature representing surrogate fluids that may interact with fine (Gamble's solutions, artificial lysosomal fluid (ALF)) and coarse particles (gastric fluid), for liquid to solid (L/S) ratios ranging from 500 to 20,000. Visual MINTEQ 3.1. was used to enhance the discussion on how the solubility of metals in the leaching solution depends on the composition of the simulated fluids and the speciation of metals. The results obtained indicate that a small change in the composition of Gamble's solution (the presence of glycine) may increase significantly the bioaccessibility at a L/S ratio of 5,000. The highest bioaccessibility of most of the studied metal(loid)s at a L/S ratio of 5,000 was found for ALF fluid. The study of the effect of the L/S ratio showed that metal(loid)s bioaccessibility in Gamble's fluid increased logarithmically with increasing L/S ratio, while it remained practically constant in ALF and gastric fluid. This different behavior is explained assuming that the leaching of metal(loid)s in Gamble's solution is solubility-controlled, while in ALF and gastric fluid is availability-controlled.

A Review on the Environmental Exposure to Airborne Manganese, Biomonitoring, and Neurological/Neuropsychological Outcomes

The occupational exposure to airborne manganese (Mn) has been linked for decades with neurological effects. With respect to its environmental exposure, the first reviews on this matter stated that the risk posed to human health by this kind of exposure was still unknown. Later, many studies have been developed to analyze the association between environmental Mn exposure and health effects, most of them including the measure of Mn in selected human biomarkers. This review aims at collecting and organizing the literature dealing with the environmental airborne Mn exposure (other routes of exposure were intentionally removed from this review), the biomonitoring of this metal in different body matrices (e.g., blood, urine, nails, hair), and the association between exposure and several adverse health effects, such as, e.g., neurocognitive, neurodevelopmental, or neurobehavioral outcomes. From the different exposure routes, inhalation was the only one considered in this review, to take into account the areas influenced by industrial activities closely related to the Mn industry (ferromanganese and silicomanganese plants, Mn ore mines, and their processing plants) and by traffic in countries where a fuel additive, methylcyclopentadienyl manganese tricarbonyl (MMT), has been used for years. In these areas, high air Mn levels have been reported in comparison with the annual Reference Concentration (RfC) given by the US EPA for Mn, 50 ng/m³. This review was performed using Scopus and MEDLINE databases with a keyword search strategy that took into account that each valid reference should include at least participants that were exposed to environmental airborne Mn and that were subjected to analysis of Mn in biomarkers or subjected to neurological/neuropsychological tests or both. Overall, 47 references matching these criteria were included in the discussion. Most of them report the measure of Mn in selected biomarkers (N = 43) and the assessment of different neurological outcomes (N = 31). A negative association is usually obtained between Mn levels in hair and some neurological outcomes, such as cognitive, motor, olfactory, and emotional functions, but not always significant. However, other biomarkers, such as blood and urine, do not seem to reflect the chronic environmental exposure to low/moderate levels of airborne Mn. Further studies combining the determination of the Mn exposure through environmental airborne sources and biomarkers of exposure and the evaluation of at least cognitive and motor functions are needed to better understand the effects of chronic non-occupational exposure to airborne Mn.

Inhalation bioaccessibility estimation of polycyclic aromatic hydrocarbons from atmospheric particulate matter (PM10): Influence of PM10 composition and health risk assessment

Polycyclic aromatic hydrocarbons (PAHs) inhalation bioaccessibility was assessed in 65 atmospheric particulate matter samples (PM₁₀) collected at an Atlantic coastal European urban site. The proposed method consists on a physiologically based extraction (PBET) by using Gamble's solution followed by a vortex assisted liquid-liquid micro-extraction (VALLME) and quantification by high performance liquid chromatography with fluorescence detection (HPLC-FLD). The use of a micro-extraction technique combined with FLD detection, provides a simple, fast, sensitive, accurate and low-cost methodology to PAHs quantification in bioaccessible fractions. Accuracy of the bioaccessibility study was assessed by means of a mass balance approaches using a PM₁₀ filter and a certified reference material (ERM-CZ100). High-moderate inhalation bioaccessibilities were found for phenanthrene (Phe), fluoranthene (Ft) and pyrene (Pyr) (average ratios in the 52-65% range); while dibenz (a,h)anthracene (DBahA), indeno (1,2,3-cd)pyrene (IP) and benzo (g,h,i)perylene (BghiP) were observed to be less bioaccessibles (average ratios in the 11-14% range). Relationship between PM₁₀ composition (major ions, trace metals, equivalent black carbon (eBC) and UV-absorbing particulate matter (UVPM)) and PAHs bioaccessibility ratios was also assessed. Principal Component Analysis (PCA) showed that PAHs bioaccessibility percentage is dependent on anthropogenic (eBC, UVPM and Sb concentrations) and marine sources of PM₁₀. Predicted PAHs bioaccessibilities after applying a multiple linear regression model based on marine and anthropogenic source of PM₁₀ could also be established. Health risk assessment of target PM₁₀-associated PAHs via inhalation was assessed considering bioaccessibility concentrations by using hazard index (HI) and BaP equivalent concentration (BaP_eq) approaches, suggesting no carcinogenic risk in the area during the sampling campaign.

Assessment of the PM2.5 oxidative potential in a coastal industrial city in Northern France: Relationships with chemical composition, local emissions and long range sources

The objective of this work was to relate PM_2.5 Oxidative Potential (OP) data to PM composition and PM local and distant source contributions. PM_2.5 collected in Dunkerque, a coastal industrial city in North of France, was extensively characterized for major and minor chemical species. PM_2.5 filters were extracted using a synthetic pulmonary fluid to achieve OP estimation based on Ascorbic Acid (AA) and dithiothreitol (DTT) depletion assays. In order to evidence relationships between OP values, chemical composition and local and distant source contributions, correlation coefficient, Principal Component Analysis (PCA), concentration roses, polar plots and concentration weighted trajectories were used. Heterogeneous conclusions were drawn using the three first methods as the bivariate polar plots lead to dismiss some of the correlations evidenced using correlation coefficient and PCA. Both AA and DTT tests appeared complementary as they were not sensitive to the same species/source contribution. The bivariate polar plot representation of OP values versus wind direction and wind speed revealed that PM_2.5 concentration and combustion sources were linked to OP-AA, whereas emissions from integrated steelworks, electric steelworks, heavy fuel oil combustion and traffic non-exhaust significantly contribute to OP-DTT. Sea-salts, aged sea-salts, crustal, secondary sulfates and secondary nitrates sources were not found to contribute to OP values. Constant weighted trajectories evidenced several source regions responsible for high OP values with Belgium, Germany, Netherlands and France at the leader position. Contribution of inland regions appeared possibly related to the biomass and traffic related combustion while heavy fuel oil combustion could also be involved in the contribution of marine and coastal areas.

Health Risk Assessment of Heavy Metals Accumulated on PM2.5 Fractioned Road Dust from Two Cities of Pakistan

The aim of this study is to identify and investigate levels of toxic heavy metals in PM2.5 fractioned road dust to better understand the associated inhalation risk and potential health impacts. To achieve this aim, concentrations of seven traffic generated heavy metals (Cu, Pb, Zn, Cd, Ni, Sb, and Cr) were determined in the PM2.5 fraction of road dust samples from four different locations (offices, residential, hospital, and school) in two cities (Karachi and Shikarpur) of Pakistan using ICP-MS. The average concentration values of heavy metals in Karachi were as follows: 332.9 mg/kg Cu, 426.6 mg/kg Pb, 4254.4 mg/kg Zn, 62.3 mg/kg Cd, 389.7 mg/kg Ni, 70.4 mg/kg Sb, 148.1 mg/kg Cr, whereas the average concentration values of heavy metals in Shikarpur were 245.8 mg/kg Cu, 538.4 mg/kg Pb, 8351.0 mg/kg Zn, 57.6 mg/kg Cd, 131.7 mg/kg Ni, 314.5 mg/kg Sb, 346.6 mg/kg Cr. The pollution level was assessed through two pollution indices enrichment factor (EF) and geoaccumulation index (Igeo). These indices showed moderate to extreme level pollution in studied areas of both cities. The health risk assessment through inhalation contact was conducted according to the United States Environmental Protection Agency's (USEPA) model for children and adults. Both non-cancerous and cancerous risks were characterised in the road dust samples for each location. As yet, there is not a single study on the concentrations of heavy metals in PM2.5 fractions of road dust in Karachi and Shikarpur, findings of this research will facilitate researchers for further investigations in current field.

Correlation between lead speciation and inhalation bioaccessibility using two different simulated lung fluids

This study investigated the relationship between lead (Pb) speciation determined using Extended X-ray Absorption Fine Structure (EXAFS) spectroscopy in <10 μm particulate matter (PM₁₀) from mining/smelting impacted Australian soils (PP, BHK5, BHK6, BHK10 and BHK11) and inhalation exposure using two simulated lung fluids [Hatch's solution, pH 7.4 and artificial lysosomal fluid (ALF), pH 4.5]. Additionally, elemental composition of Pb rich regions in PP PM₁₀ and the post-bioaccessibility assay residuals were assessed using a combination of Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDX) to provide insights into how extraction using simulated lung fluids may influence Pb speciation in vitro. Correlation between Pb speciation (weighted %) and bioaccessibility (%) was assessed using Pearson r (α = 0.1 and 0.05). Lead concentration in PM₁₀ samples ranged from 782 mg/kg (BHK6) to 7796 mg/kg (PP). Results of EXAFS analysis revealed that PP PM₁₀ was dominated by Pb adsorbed onto clay/oxide, while the four BHK PM₁₀ samples showed variability in the weighted % of Pb adsorbed onto clay/oxide and organic matter bound Pb, Pb phosphate, anglesite and galena. When bioaccessibility was assessed using different in vitro inhalation assays, results varied between samples and between assays, Pb bioaccessibility in Hatch's solution ranged from 24.4 to 48.4%, while in ALF, values were significantly higher (72.9-96.3%; p < 0.05). When using Hatch's solution, bioaccessibility outcomes positively correlated to anglesite (r:0.6246, p:0.0361) and negatively correlated to Pb phosphate (r: -0.9610, p:0.0041), organic bound Pb (r: -0.7079, p: 0.0578), Pb phosphate + galena + plumbojarosite (r: -0.9350, p: 0.0099). No correlation was observed between Pb bioaccessibility (%) using Hatch's solution and weighted % of Pb adsorbed onto clay/oxide and between bioaccessibility (%) using ALF and any Pb species. SEM and EDX analysis revealed that a layer of O-Pb-Ca-P-Si-Al-Fe formed during the in vitro extraction using Hatch's solution.

Influence of household smoking habits on inhalation bioaccessibility of trace elements and light rare earth elements in Canadian house dust

In this study, total concentration and inhalation bioaccessibility (dissolution in simulated biological solution) of trace elements (TE) and rare earth elements (REE) were assessed in PM₁₀ from Canadian house dust samples with smoking (n = 25) and non-smoking (n = 25) status. Compared to the natural background concentrations in Canadian soils, median Zn, Pb, Cd and Cu concentrations in PM₁₀ were 10-23 fold higher, while median La, Ce and Pr concentrations were 1.6-2.4 fold higher. Mann-Whitney tests (α = 0.05) indicated no difference between the median TE concentrations based on the smoking status of the household; however, median REE concentrations were significantly higher in the PM₁₀ of smoking households. Additionally, Cd and Ni were positively correlated (Spearman r, p < 0.05) to La, Ce and Nd in smoking households, suggesting that tobacco combustion may have contributed REE in the PM₁₀ of these households. Median inhalation-ingestion bioaccessibility assay outcomes of arsenic (As) and lead (Pb) was higher in the non-smoking households when compared to smoking households (Mann Whitney test, α = 0.05), suggesting that tobacco combustion products may be associated with less soluble species of As and Pb. Although REE bioaccessibility was negligible in simulated lung epithelial fluid regardless of the smoking status of the household, bioaccessibility in the lung-gastric phase was 23.6-27.6% in the smoking household and 34.7-36.7% in the non-smoking households, indicating a significantly lower REE dissolution in PM₁₀ of smoking households. In contrast, between 17 and 21.9% bioaccessibility of REE was observed when artificial lysosomal fluid was used, where the outcome was not significantly affected by the smoking status. This study indicates that despite a higher median REE concentration in the PM₁₀ of smoking households, inhalation bioaccessibility may be significantly influenced by the mineralogy.

Metal bioaccessibility, particle size distribution and polydispersity of playground dust in synthetic lysosomal fluids

Inhalation of playground dust-derived fine particles in schoolyards poses a risk from exposure to metal(oids) and minerals. In this work, we obtained the total concentration and bioaccessibility of metal(oids) with Gamble Solution (GS) and Artificial Lysosomal Fluid (ALF) synthetic solutions, simulating the extracellular neutral pH environment of the lung and the intracellular conditions of the macrophage, respectively. Scanning Electron Microscope (SEM), and Dynamic Light Scattering analysis (DLS) techniques were used to characterize particles with a size smaller than 2.5 μm, which can be assimilated by macrophages in the deep part of the lung. Arsenic (As), lead (Pb), copper (Cu), manganese (Mn), zinc (Zn), and iron (Fe) showed concentrations of 39.9, 147.9, 286, 1369, 2313, 112,457 mg·kg^-1, respectively. The results indicated that all studied elements were enriched when compared to (i) local geochemical background and (ii) findings reported in other cities around the world. Bioaccessibility of metal(oids) in GS was low-moderate for most studied elements. However, in ALF assays, bioaccessibility was high among the samples: for lead (Pb = 34-100%), arsenic (As = 14.7-100%), copper (Cu = 17.9-100%), and zinc (Zn = 35-52%) possibly related to hydrophobic minerals in dust. SEM and DLS image analysis showed that playground dust particles smaller than 2.5 μm are dominant, particularly particles with a size range of 500-600 nm. The polydispersity detected in these particle sizes showed that most of them might be crystalline compounds (elongated shapes) forming agglomerates instead of combustion particles (spheres). Moreover, the circularity detected varies from 0.57 to 0.79 (low roundness), which corroborates this finding. The presence of agglomerates of ultrafine/nanoparticles containing highly bioaccessible metals in playground sites may have severe implications in children's health. Therefore, further studies are required to characterize the size distribution, structure, shape and composition of such minerals which are essential factors related to the toxicology of inhaled dust particles.

Contamination identification, source apportionment and health risk assessment of trace elements at different fractions of atmospheric particles at iron and steelmaking areas in China

China has the largest share of global iron and steel production, which is considered to play a significant contribution to air pollution. This study aims to investigate trace element contamination at different fractions of particulate matter (PM) at industrial areas in China. Three PM fractions, PM2.1-9.0, PM1.1-2.1 and PM1.1, were collected from areas surrounding iron and steelmaking plants at Kunming, Wuhan, Nanjing and Ningbo in China. Multiple trace elements and their bioavailability, as well as Pb isotopic compositions, were analysed for identification of contaminants, health risk assessment and source apportionment. Results showed that PM particles in the sites near industrial areas were associated with a range of toxic trace elements, specifically As, Cr(VI), Cd and Mn, and posed significant health risks to humans. The isotopic Pb compositions identified that coal and high temperature metallurgical processes in the steelmaking process were the dominant contributors to local air pollution in these sites. In addition to iron and steelmaking activities, traffic emissions and remote pollution also played a contributing role in PM contamination, confirmed by the differences of Pb isotopic compositions at each PM fraction and statistical results from Preference Ranking Organization Method for Enrichment Evaluations (PROMETHEE) and Geometrical Analysis for Interactive Aid (GAIA). The results presented in this study provide a comprehensive understanding of PM emissions at iron and steelmaking areas, which helps to guide subsequent updates of air pollution control guidelines to efficiently minimise environmental footprint and ensure long term sustainability of the industries.

Assessment of the health risk related to exposure to ultrafine, fine, and total particulates and metals in a metal finishing plant

The materials and byproducts of the processes used in the metal finishing industry are released as particle contaminants into the air in the workplace. The present study aimed to determine the concentrations and size distributions of these particles and of elements chromium, nickel, copper, manganese, cobalt, and lead (Cr, Ni, Cu, Mn, Co, and Pb, respectively) in a metal finishing industry and evaluate their potential health risks. Particles that are airborne from the dipping baths in the plant were sampled using a Sioutas cascade impactor at five different size fractions (PM_>2.5, PM_1.0-2.5, PM_0.5-1.0, PM_0.25-0.5, PM_<0.25) and gravimetric analyses were conducted on the sampled filters. The GF-AAS 600 graphite atomic absorption spectrophotometer (PerkinElmer Corporation, Waltham, MA, USA) was used to analyze the elements and the method of USEPA was used to assess the health risk. The ratio of fine particles (PM_2.5) to total suspended particles (TSPs) was 0.6. We observed that 50% of TSPs were composed of PM_1.0 and that 68-88% of the metals were found in the fine particle fractions. Pb, Cr, and Mn were significantly positively correlated in the PM_1.0 fraction, and the highest linear relationship was found between Pb and Cr (r = 0.85, p < 0.01). The total hazard quotient (HQ) for PM_2.5 was 1.43, which is higher than the acceptable limit of 1.0. The excess lifetime cancer risk (ELCR) for hexavalent chromium (Cr[VI]) in PM_2.5 was 6.09 × 10^-5 for female workers and 6.54 × 10^-5 for male workers, which are higher than the acceptable limit of 1.0 × 10^-6, while total ELCRs for female and male workers were 6.21 × 10^-5 and 6.21 × 10^-5, respectively. The lifetime cancer risk associated with Cr(VI) in Cr electroplating plants should be taken into consideration as a significant health risk for the workers.

Atmospheric dust characterisation in the mining district of Cartagena-La Unión, Spain: Air quality and health risks assessment

Nowadays, air pollution has a major impact on the environment and human health. Owen gauges allow the sampling of atmospheric depositions in polluted sites for further characterisation. This paper shows the study of the air particles of an old mining zone in Cartagena-La Unión (South-east of Spain) in order to quantify their potential risk on human health. There were 4 strategic sites monitored: the main mining tailing (Avenque), the urban area (La Unión), an agricultural zone (formerly mining) and a site in the Mediterranean coast. Physico-chemical and mineralogical characterisation was applied to atmospheric fallouts. The granulometry revealed a dust particle size around 15 μm, with the coarsest particles in the urban area and the thinnest at the tailing site. XRD analyses showed the presence of quartz, carbonates, sulphides and sulphates. Observations with SEM-EDX confirmed chemical spectra and allowed us to classify the particles into well-crystallised minerals and heterogeneous dusts. Total metal content determination was carried out by ICP-MS analyses and results showed Zn, Pb, As and Cd fluxes (respectively 2549, 1275, 68 and 7 μg·m^-2·d^-1) exceeding the limit values set by European legislations in the mining area. The fluxes of Zn, Pb and As also exceed these standards in the urban area whereas the coastal zone only exceeds the thresholds in the case of As. Inhalation health risk (defined by US EPA, 2009) was quantified in the sites using total and bioaccessible metal contents of the dusts. Risk calculations using total metal content considering a residential scenario showed acceptable risk for all sites except for the mining tailing which presented non-acceptable cancer and hazard risk mainly due to the total As and Pb contents. When considering the bioaccessible fraction of As and Pb, the risk diminished to acceptable values, demonstrating the overestimation produced when using total metal contents.

Incorporating bioaccessibility into health risk assessment of heavy metals in particulate matter originated from different sources of atmospheric pollution

Rapid industrialization and urbanization have resulted in widespread pollution of airborne particulate matter (PM) containing various heavy metals with adverse human-health effects. Health risk assessment of PM calls for accurate evaluation of the bioaccessibility, instead of the total content, of heavy metals in PM. Here, we demonstrated that the leachable fraction of particle-bound As, Pb, Cr, Mn, Cd, Cu, Ni and Zn in lung fluid within the typical retention duration of particles in human lungs varied drastically among particles originated from different air pollution sources, including coal combustion, biomass combustion, fugitive dust, road dust, construction dust, cement and soil. Moreover, bioaccessibility of heavy metals, particularly in biomass combustion, cement and soil particles, was strongly dependent on pollution sources, and the particulate Cu, Ni, Pb and Cd appeared to be the primary indicators of the source dependence of heavy metal bioaccessibility. Using total rather than bioaccessible concentrations of particle-bound heavy metals not only led to overestimation of the health risk of source particles, but more importantly, inaccurate identification of the high-risk pollution sources and the priority metal pollutants in the source particles. When considering bioaccessibility of particle-bound heavy metals examined in this study, coal combustion products exhibited the highest carcinogenic and noncarcinogenic risks among all source particles, whereas cement particles would be the source with highest risk based on total metal content. As and Mn appeared to be the main drivers for the noncarcinogenic risks of source particles, while As, Ni and Cr were the major contributors to the carcinogenic risks of source particles, significantly different from those based on total contents. This research underlines the importance of incorporating bioaccessibility into health risk indexes of frequently occurring particle-bound heavy metals from specific air pollution sources, which will facilitate risk-based assessment of source contribution and hence effective source regulation of airborne PM.

Inhalation bioaccessibility of Cd, Cu, Pb and Zn and speciation of Pb in particulate matter fractions from areas with different pollution characteristics in Henan Province, China

Windowsill particulate matter (PM) samples were collected from an area near large lead-smelting facilities in Jiyuan (JP), the urban area of Jiyuan (JU) and the peri-urban area of Mianchi (MC) in Henan, China to investigate the concentration and inhalation bioaccessibility of Cd, Cu, Pb and Zn. The <10 μm portions of the samples were extracted with simulated lung fluid to assess the in vitro inhalation bioaccessibility. Lower concentrations of heavy metals were found in the MC samples than in the JP and the JU samples. The average concentrations of Pb, Cd and Cu in the portions of the same size are in the order of JP samples > JU samples > MC samples. For Pb, Cd and Zn, the maximum inhalation bioaccessibility fraction values are all found in the MC samples, which ranged 3.87-8.79%, while those of the JP and the JU samples are <2%. The Pb speciation analysis with X-ray absorption spectrometry indicate mineral bound Pb, PbS and Pb₃(PO₄)₂ are the predominant Pb species in the JP samples; for the JU sample, organic bound Pb is the predominant Pb species in the 45-125 μm portion, while mineral bound Pb is the predominant Pb species in the 10-45 μm portion; for the MC samples, organic bound Pb is the predominant Pb species, followed by PbS. The results indicate that there is significant accumulation of Pb, Cd, Cu and Zn associated with PM in the area near the lead smelter and in the urban area of Jiyuan, especially Pb and Cd, however, the inhalation bioaccessibility of these metals in samples from the lead smelting impacted area is low, this may be due to the higher proportion of less soluble species of the metals in the samples from this area. However, organic matter bound Pb found in some samples has higher bioaccessibility than other Pb species.

Biosolubility of high temperature insulation wools in simulated lung fluids

OBJECTIVE

Biosolubility is an important parameter in the understanding of mechanisms involved in pulmonary toxicity of fibrous materials. It can be studied in vitro using models of simulated lung fluids and observing the loss of structural molecules, expressed as dissolution constant (Kdis). The aim of this paper was the study of dissolution behaviour of four wools belonging to high temperature insulation wools (HTIW) in saline solutions simulating lung fluids.

METHODS

Four HTIW were studied in saline solutions at pH 7.4 (representative of the extracellular environment) and 4.5 (representative of the intracellular conditions): refractory ceramic fibers (RCF), two alkaline earth silicate wools (AES1 and AES2 with high calcium and magnesium content respectively), and polycrystalline wools (PCW). Size, morphological and chemical changes of fibers were observed by scanning electron microscopy (SEM) with energy-dispersive X-ray spectrometry (EDS) and inductively coupled plasma atomic emission spectrometry (ICP-AES).

RESULTS

RCF, AES2 and PCW did not show statistically significant diameter changes. AES1 size distribution shifted to a larger mean diameter suggesting that through dissolution there was a preferential loss of thin fibers at acid pH after 14 days of treatment.Both AES wools showed selective leaching of alkali/alkali earth oxides (incongruent dissolution) at pH 7.4: a fast and extensive selective leaching of calcium for AES1 with complete dissolution of fibers already after 14 days of treatment and a moderate selective leaching of magnesium for AES2. PCW showed some transversal breakage of the fibers in both pH environments (low congruent dissolution). For RCF, the treatment produced uncorroded fibers in both pH environments without chemical changes and fiber fragmentation (no dissolution).The estimated Kdis at physiological pH followed the sequence: AES1 > AES2 > PCW > RCF. All wools had a low Kdis at acid pH suggesting a low dissolution rate of short fibers.

CONCLUSION

The leaching process and transverse fragmentation play an important role in the biopersistence mechanisms and pathogenicity of fibers and the Kdis estimate is undoubtedly useful as a preliminary toxicological screening of fibers, especially for developing fibers.

Pulmonary bioaccessibility of trace metals in PM2.5 from different megacities simulated by lung fluid extraction and DGT method

Atmospheric fine particulate matters (PM_2.5) pose significant risks to human health through inhalation, especially in the rapidly developing China due to air pollution. The harmful effects of PM_2.5 are determined not only by its concentrations and hazardous components from diverse sources, but more by their bioavailable fractions actually absorbed by human body. To accurately estimate the inhalation risks of airborne metals, a physiologically based bioaccessibility method combining Simulated Lung Fluid (SLF) extraction and Diffusive Gradients in Thin-films (DGT) approaches was developed, representing the dissolution of particulate metals into lung fluid and the subsequent lung absorption of free metal cations in solution, respectively. The new method was used to compare the lung bioaccessibility of typical trace metals in PM_2.5 from three China megacities (Shanghai and Nanjing in the east, Guangzhou in south) during heavy pollution seasons. Generally, the SLF bioaccessibility (%) simulating the solubility of particulate metals in alveolar lung fluid was in order of Ni > Cd > Mn » Pb, while the succeeding DGT bioaccessibility representing labile metal fractions in solution phase absorbed directly by lung was lower and ranked as Ni ∼ Mn > Cd » Pb, thus Ni and Cd posed relatively higher potential risks owing to their high air pollution level and higher pulmonary bioaccessibility. Due to varied particle sources such as coal combustion and traffic emissions, some airborne metal concentrations (Pb, Ni) showed inconsistent spatial patterns with bulk PM_2.5 concentrations, and also varied bioaccessibility in different regions. The framework for PM_2.5 pollution risk assessments should be refined by considering both aerosol components and associated pollutants' bioaccessibility.