Risk assessment due to dermal exposure of trace elements and indigo dye in jeans: Migration to artificial sweat

Ecological impacts and potential hazards of nickel on soil microbes, plants, and human health

Nickel (Ni) contamination poses a serious environmental concern, particularly in developing countries: where, anthropogenic activities significantly contributes to Ni accumulations in soils and waters. The contamination of agricultural soils with Ni, increases risks of its entry to terrestrial ecosystems and food production systems posing a threat to both food security and safety. We examined the existing published articles regarding the origin, source, accumulation, and transport of Ni in soil environments. Particularly, we reviewed the bioavailability and toxic effects of Ni to soil invertebrates and microbes, as well as its impact on soil-plant interactions including seed germination, nutrient uptake, photosynthesis, oxidative stress, antioxidant enzyme activity, and biomass production. Moreover, it underscores the potential health hazards associated with consuming crops cultivated in Ni-contaminated soils and elucidates the pathways through which Ni enters the food chain. The published literature suggests that chronic Ni exposure may have long-term implications for the food supply chain and the health of the public. Therefore, an aggressive effort is required for interdisciplinary collaboration for assessing and mitigating the ecological and health risks associated with Ni contamination. It also argues that these measures are necessary in light of the increasing level of Ni pollution in soil ecosystems and the potential impacts on public health and the environment.

Human health risk assessment associated with the reuse of treated wastewater in arid areas

Qatar produces more than 850,000 m3/day of highly treated wastewater. The present study aims at characterizing the effluents coming out of three central wastewater treatment plants (WWTPs) of chemical pollutants including metals, metalloids and antibiotics commonly used in the country. Additionally, the study is assessing human health risks associated with the exposure to the treated wastewater (TWW) via dermal and ingestion routes. Although the origin of domestic wastewater is desalinated water (the only source of fresh water), the results show that the targeted parameters in TWW were within the international standards. Concentrations of Cl, F, Br, NO3, NO2, SO4 and PO4, were 389, <0.1, 1.2, 25, <0.1, 346, and 2.8 mg/L, respectively. On the other hand, among all cations, metals and metalloids, only boron (B) was 2.1 mg/L which is higher than the Qatari guidelines for TWW reuse in irrigation of 1.5 mg/L. Additionally, strontium (Sr) and thallium (Tl) were detected with relatively high concentrations of 30 mg/L and 12.5 μg/L, respectively, due to their natural and anthropogenic sources. The study found that the low concentrations of all tested metals and metalloids do not pose any risk to human health. However, Tl presents exposure levels above the 10 % of oral reference dose (HQ = 0.4) for accidental oral ingestion of TWW. The results for antibiotics show that exposure for adults and children to TWW are far below the admissible daily intakes set using minimum therapeutic dose and considering uncertainty factors. Treated wastewater of Qatar can be used safely for irrigation. However, further investigations are still needed to assess microbiological quality.

Release of silver and titanium from face masks traded for the general population

Previous assessments of a selection of face masks intended for the general population in Belgium found that silver (Ag)-based biocides were present in masks advertised for antimicrobial properties; whereas titanium dioxide (TiO2) particles were detected in all the face masks in at least one layer corroborating its widespread use in the textile industry. The presence of Ag-based biocides and TiO2 particles in face masks raised questions on the possibility of release under normal wearing conditions, which could potentially cause a health risk to the consumers. Direct measurement of release of Ag and TiO2 particles during normal wearing is problematic by the lack of methodology to test release and to quantify inhaled particles. Therefore in this study, we investigated leaching experiments using artificial acid sweat as a method to evaluate the release of Ag-based biocides and TiO2 particles present in face masks. Leaching experiments were proposed as an alternative method to evaluate the quality of face masks, and as a higher tier method to assess face masks that are not safe-by-design. Results from leaching experiments showed that Ag was released in amounts varying from 0.03 up to 36 % of total Ag content, in four out of the eight face masks that claimed antimicrobial properties and that contained Ag. The leaching data of titanium (Ti) showed that despite TiO2 being detected in all face masks, only in one mask Ti was measured in detectable concentrations in artificial sweat (0.35 % of total Ti content). Comparison of leachable Ag and Ti with respective acceptable exposure limit values derived from inhalation exposure limits indicate that three face masks would need further risk assessment and could not be considered as intrinsically safe.

Occurrence and potential release of heavy metals in female underwear manufactured in China: Implication for women's health

Underwear is a potential source of women's exposure to heavy metals owing to its direct contact with the skin, especially the skin of the vagina and vulva, which has a strong absorptive capacity. However, information regarding the prevalence of metals in female underwear, and its potential hazards, remains scarce. In the present study, we examined the concentrations and potential release of Cr, Co, Ni, Cu, As, Cd, Sb, and Pb in brassieres and briefs manufactured in China. We detected higher levels of Pb and moderate levels of other metals, relative to the metal levels reported for other textiles in the literature. Cu, As, Ni and Cd, had higher migration rates (MRs) from the underwear, with medians of 100%, 100%, 30.1%, and 20.7%, respectively. The median MRs of the other metals were in the range 1.07%-15.7%. On the whole, the total and extractable concentrations of these metals differed by item and fabric type. The pollution of raw materials and the use of chemical additives containing metals commonly contributed to the metals in the underwear. On the basis of the exposure estimation, the non-carcinogenic risks posed by the underwear metals were acceptable, but the carcinogenic risks from the metals in 5.18% of brassiere samples exceeded the acceptable level.

Clothing as a potential exposure source of trace elements during early life

In recent years, the interest in determining the chemical composition of textile products has increased among the scientific community and regulatory agencies, driven by toxicological issues and environmental concerns. Chemical elements are naturally present in clothing as natural fibers or intentionally added during manufacture. Some of them show physical-chemical properties that allow their absorption through the skin. In addition, chronic situations increase the dermal exposure capacity. Because of age-specific behavioral characteristics and underdeveloped physiological function, children may be especially sensitive to exposure to trace elements. This study aimed to analyze the levels of twenty trace elements in 120 clothing items commercialized in Spain. Textile products for pregnant women and children <36 months old were included. The potential health implication of this dermal exposure in early life was also evaluated. Aluminum, zinc, and titanium showed the highest concentrations, with median levels of 27.6, 5.6, and 4.2 mg/kg, respectively. Since chromium is employed as a metal complex dye in synthetic fibers, high levels of this element were found in black polyester. Dermal exposure to titanium, which is a ubiquitous element in clothes made of synthetic fibers, was associated with a hazard quotient (HQ) higher than the threshold value (HQ > 1), with values of 1.13 for pregnant women and 1.22 for newborns. On the other hand, HQ values of other elements and cancer risks were lower than the recommended values. Assessing early-life exposure to toxic elements can help to identify potential sources and to prevent or reduce human exposure, mainly in vulnerable groups.

Non-regulated aromatic amines in clothing purchased in Spain and Brazil: Screening-level exposure and health impact assessment

The staggering amount of chemicals in clothes and their harmful effects on human health and the environment have attracted the attention of regulatory agencies and the scientific community worldwide. Azo dyes are synthetic dyestuffs with widespread use in textile industries, currently classified as emerging pollutants of great health concern to consumers. These compounds may release one or more aromatic amines (AAs) after reductive cleavage of their azo bounds. Twenty-two AAs have already been regulated due to their carcinogenic effects. However, since information on their potential toxicity is not currently available, several AAs have not been still regulated by the European Union. Considering this gap, the present study aimed to assess the levels of forty non-regulated AAs in 240 clothing items from Spain and Brazil. The potential impact on the health of vulnerable population groups after dermal exposure to those garments was also evaluated. In Brazil, at least one AA was detected in the clothes, while in samples obtained in Spain, only two of them showed values below the limit of detection for AAs. In 75 clothes, at least one of the measured AAs was higher than the hazardous threshold (30 mg/kg), which can mean risks to human health since these compounds are suspected to be mutagenic. Aniline, the most common AA, showed a high detection rate (82%) in clothes, with significantly higher concentrations in items commercialized in Brazil (0.35 vs. 0.17 mg/kg; p = 0.032). Moreover, o-aminobenzenesulfonic and p-phenylenediamine, suspected mutagenic, were found at relevant concentrations in several clothes, mainly made of synthetic fibers. In this study, the hazard index associated with exposure to AAs through clothing was low (0.006-0.13) for all the population groups of both countries in the medium-bound scenario. However, its value was close to 1 for Brazilian pregnant women (0.998) when the maximum concentration value was considered under an upper-bound scenario. The risk of exposure to non-regulated AAs may be underestimated since only dermal exposure was considered for risk assessment. Moreover, the co-occurrence of other carcinogenic and non-carcinogenic substances present in skin-contact clothes should mean an additional source of potential risk.

Dermal exposure to bisphenols in pregnant women's and baby clothes: Risk characterization

Textile manufacturing consists of a multiple-step process in which a wide range of chemicals is used, some of them remaining in the final product. Bisphenols (BPs) are non-intentionally added compounds in textiles, whose prolonged skin contact may mean a significant source of daily human exposure, especially in vulnerable groups of the population. The present study aimed to determine the levels of bisphenol A (BPA) and some BP analogs (BPB, BPF, and BPS) in 120 new clothes commercialized in Spain for pregnant women, newborns, and toddlers. In addition, exposure assessment and risk characterization were also carried out. Traces of BPA were found in all the samples, with a median concentration of 7.43 ng/g. The highest values were detected in textile samples made of polyester. Regarding natural fibers, higher concentrations of BPs were observed in garments made of conventional cotton than in those made of organic cotton, with a significant difference for BPS (1.24 vs. 0.76 ng/g, p < 0.05). Although toddlers have a larger skin-area-to-body-weight ratio, pregnant women showed higher exposure to BPs than children. Anyhow, the non-carcinogenic risks associated with BPA exposure were below the unity, even under the upper-bound scenario. However, risks could be underestimated because other exposure routes were not considered in this study. The use of BPA has been restricted in some food-related products; therefore, BPA should also be regulated in the textile industry.

Water-related atmospheric agents and solubility: two parameters of validation in toxicological screening on clothing worn by skeletal remains

In forensic toxicology, when conventional matrices are no longer available, alternative matrices can be used to assess toxicological investigations. Clothes worn by skeletal remains may be a good unconventional matrix for toxicological analyses considering that they have absorbed decomposition fluids and blood from a body. We hypothesized a scenario in which a skeleton, wearing clothes, was discovered in an open environment. From this starting point, an experimental study was developed on different textiles (cotton, wool, and polyester) to evaluate whether water-related atmospheric agents and molecule solubility can largely influence the detection of molecules of toxicological interest on this specific matrix, together with the characteristics of different garments chosen. The experimental study was performed on blood spots, previously spiked with 6-monoacetylmorphine and morphine, accurately placed on different textiles and washed with different quantities of deionized water adjusted at pH 5.6 with formic acid to simulate different rainfall conditions. Toxicological analyses were performed via Solid-Phase Extraction and High-Performance Liquid Chromatography-Tandem Mass Spectrometry analyses (Thermo Scientific™ TSQ Fortis™ II Triple-Quadrupole Mass Spectrometer). From the experimental study morphine could not be detected on 100% cotton and 100% wool fabric after the passing of 500 mL of deionized water and in 100% synthetic polyester textile after washing with 250 mL of deionized water. In conclusion, when toxicological analyses are carried out on unconventional matrices as textiles worn by corpses exposed to different environmental conditions, it is of great importance, in using such substrates as evidence for the presence of molecules of toxicological interest, to evaluate chemical-physical characteristics of each analyte under investigation in order to correctly interpret the toxicological data obtained.

Screening of regulated aromatic amines in clothing marketed in Brazil and Spain: Assessment of human health risks

Azo dyes used in textile products contain aromatic amines (AAs), which may be released into the environment after skin bacteria cleavage the azo bond. In Europe, 22 carcinogenic AAs are regulated. Unfortunately, no information is available in many non-European countries, including Brazil. This study aimed to determine the concentrations of 20 regulated AAs in clothes marketed in Brazil and Spain. Generally, higher levels of regulated AAs were found in samples sold in Brazil than in Spain, which is linked to the lack of regulation. Sixteen AAs showed concentrations above 5 mg/kg in samples commercialized in Brazil, while 11 exceeded that threshold in Spain. Regulated AAs with levels above 5 mg/kg were more found in synthetic clothes of pink color. Concentrations in clothing were also used to evaluate the dermal exposure to AAs in 3 vulnerable population groups. The highest exposure corresponded to 2,4-diaminoanisole for toddlers in Brazil and 4,4-oxydianiline for newborns in Spain. Non-cancer risks associated with exposure to 4,4-benzidine by Brazilian toddlers was 14.5 (above the threshold). On the other hand, 3,3-dichlorobenzidine was associated with potential cancer risks for newborns and toddlers in Brazil. Given this topic's importance, we recommend conducting continuous studies to determine the co-occurrence of carcinogenic substances.

Insights into Health Risks of Face Paint Application to Opera Performers: The Release of Heavy Metals and Stage-Light-Induced Production of Reactive Oxygen Species

Face paints used by opera performers have been shown to contain high levels of heavy metals. However, whether frequent exposure, via dermal contact and inadvertent oral ingestion, results in occupational diseases is unknown, as is the potential exacerbation of toxicity by high-intensity irradiation from stage lights. In this study, we examined the release of Cr, Cu, Pb, and Zn from 40 face paints and the consequent health risks posed by different practical scenarios involving their use. The results showed that the in vitro bioaccessibility (IVBA) of Cr, Cu, Pb, and Zn in the tested products was, on average, 7.0, 5.5, 19.9, and 7.9% through oral ingestion and 1.1, 2.2, 1.6, and 1.2% through dermal contact, respectively. Stage light irradiation significantly increased the IVBA associated with dermal contact, to the average of 4.8, 34.9, 5.7, and 1.9% for Cr, Cu, Pb, and Zn, respectively. The increase was mainly due to the light-induced generation of reactive oxygen species, particularly hydroxyl free radicals. The vitality and transcriptional response of 3D skin models as well as a quantitative risk assessment of skin sensitization indicated that dermal contact with face paints may induce predictable skin damage and potentially other skin diseases. Long-term exposure to face paints on stage may also pose a non-carcinogenic health risk. The demonstrated health risks to opera performers of face paint exposure should lead to strict regulations regarding the content of theatrical face paints.

Abatement of microfibre pollution and detoxification of textile dye - Indigo by engineered plant enzymes

Microfibres (diameter <5 mm) and textile dyes released from textile industries are ubiquitous, cause environmental pollution, and harm aquatic flora, fauna, animals and human life. Therefore, enzymatic abatement of microfibre pollution and textile dye detoxification is essential. Microbial enzymes for such application present major challenges of scale and affordability to clean up large scale pollution. Therefore, enzymes required for the biodegradation of microfibres and indigo dye were expressed in transplastomic tobacco plants through chloroplast genetic engineering. Integration of laccase and lignin peroxidase genes into the tobacco chloroplast genomes and homoplasmy was confirmed by Southern blots. Decolorization (up to 86%) of samples containing indigo dye (100 mg/L) was obtained using cp-laccase (0.5% plant enzyme powder). Significant (8-fold) reduction in commercial microbial cellulase cocktail was achieved in pretreated cotton fibre hydrolysis by supplementing cost effective cellulases (endoglucanases, ß-glucosidases) and accessory enzymes (swollenin, xylanase, lipase) and ligninases (laccase lignin peroxidase) expressed in chloroplasts. Microfibre hydrolysis using cocktail of Cp-cellulases and Cp-accessory enzymes along with minimal dose (0.25% and 0.5%) of commercial cellulase blend (Ctec2) showed 88%-89% of sugar release from pretreated cotton and microfibres. Cp-ligninases, Cp-cellulases and Cp-accessory enzymes were stable in freeze dried leaves up to 15 and 36 months respectively at room temperature, when protected from light. Use of plant powder for decolorization or hydrolysis eliminated the need for preservatives, purification or concentration or cold chain. Evidently, abatement of microfibre pollution and textile dye detoxification using Cp-enzymes is a novel and cost-effective approach to prevent their environmental pollution.

Re-evaluation of the existing health-based guidance values for copper and exposure assessment from all sources

Copper is an essential micronutrient and also a regulated product used in organic and in conventional farming pest management. Both deficiency and excessive exposure to copper can have adverse health effects. In this Scientific Opinion, the EFSA 2021 harmonised approach for establishing health-based guidance values (HBGVs) for substances that are regulated products and also nutrients was used to resolve the divergent existing HBGVs for copper. The tightly regulated homeostasis prevents toxicity manifestation in the short term, but the development of chronic copper toxicity is dependent on copper homeostasis and its tissue retention. Evidence from Wilson disease suggests that hepatic retention is indicative of potential future and possibly sudden onset of copper toxicity under conditions of continuous intake. Hence, emphasis was placed on copper retention as an early marker of potential adverse effects. The relationships between (a) chronic copper exposure and its retention in the body, particularly the liver, and (b) hepatic copper concentrations and evidence of toxicity were examined. The Scientific Committee (SC) concludes that no retention of copper is expected to occur with intake of 5 mg/day and established an Acceptable Daily Intake (ADI) of 0.07 mg/kg bw. A refined dietary exposure assessment was performed, assessing contribution from dietary and non-dietary sources. Background copper levels are a significant source of copper. The contribution of copper from its use as plant protection product (PPP), food and feed additives or fertilisers is negligible. The use of copper in fertilisers or PPPs contributes to copper accumulation in soil. Infant formula and follow-on formula are important contributors to dietary exposure of copper in infants and toddlers. Contribution from non-oral sources is negligible. Dietary exposure to total copper does not exceed the HBGV in adolescents, adults, elderly and the very elderly. Neither hepatic copper retention nor adverse effects are expected to occur from the estimated copper exposure in children due to higher nutrient requirements related to growth.

Hazardous chemical elements in cleaning cloths, a potential source of microfibres

Although potentially hazardous chemical elements (e.g., Cu, Cr, Pb, Sb, Ti, Zn) have been studied in clothing textiles, their presence in cleaning textiles is unknown. In this study, 48 cleaning cloth products (consisting of 81 individual samples) purchased in Europe, and consisting of synthetic (petroleum-based), semi-synthetic or natural fibres or combinations of these different types, have been analysed for 16 chemical elements by X-ray fluorescence (XRF) spectrometry. Titanium was detected in most cases (median and maximum concentrations ~3700 and 12,400 mg kg^-1, respectively) and Raman microspectroscopy revealed that TiO₂ was present as anatase. Barium, Br, Cr, Cu, Fe and Zn were frequently detected over a range of concentrations, reflecting the presence of various additives, and Sb was present at concentrations up to about 200 mg kg^-1 in samples containing polyester as catalytic residue from the polymerisation process. Lead was detected as a contaminant in four samples and at concentrations below 10 mg kg^-1. Overall, the range of the chemical element profiles and concentrations was similar to those for clothing materials published in the literature, suggesting that broadly the same additives, materials and processes are employed to manufacture cloths and clothing textiles. The mechanisms by which potentially hazardous chemical elements are released into the environment with microfibres or mobilised into soluble or nano-particulate forms remain to be explored.

Occurrence and health implications of heavy metals in preschool children's clothing manufactured in four Asian regions

Clothing may be a potential contributor to body metal burden in children. However, available information on heavy metals in children's clothing is extremely limited and the associated health risks remain poorly understood. This study investigated the concentrations of Pb, Cd, Co, Zn, Cr, As, Cu and Ni in new preschool children's clothing manufactured in four Asian regions. The children's clothing had higher levels of Ni and Cr but lower levels of Pb and Cd in comparison to the concentrations reported in other textile products. The concentrations of Cd were higher in the black clothing than those in the white and color samples. The non-cotton samples contained higher Co concentrations. The Pb concentrations in the samples manufactured in China were significantly higher than those in the other three regions. We estimated the dermal exposure doses for these metals and calculated the associated risks. The results indicated that the health risks from exposure to these metals in the children's clothing were acceptable. However, more research is required to investigate heavy metals and the associated risks in child clothing due to the increasing complexity of their materials and manufacturing processes.

Health risk assessment of polychlorinated biphenyls (PCBs) in baby clothes. A preliminary study

Clothes may contain a large range of chemical additives and other toxic substances, which may eventually pose a significant risk to human health. Since they are associated with pigments, polychlorinated biphenyls (PCBs) may be especially relevant. On the other hand, infants are very sensitive to chemical exposure and they may wear some contact and colored textiles for a prolonged time. Consequently, a specific human health risk assessment is required. This preliminary study was aimed at analyzing the concentrations of PCBs in ten bodysuits purchased in on-line stores and local retailers. The concentrations of 12 dioxin-like and 8 non-dioxin-like PCB congeners were determined by gas chromatography coupled to high resolution mass spectrometry, with detection limits ranging between 0.01 and 0.13 pg/g. The dermal absorption to PCBs of children at different ages (6 months, 1 year and 3 years old) was estimated, and the non-cancer and cancer risks were evaluated. Total levels of PCBs ranged from 74.2 to 412 pg/g, with a mean TEQ concentration of 13.4 pg WHO-TEQ/kg. Bodysuits made of organic cotton presented a total mean PCB concentration substantially lower than clothes made of regular cotton (11.0 vs. 15.8 pg WHO-TEQ/kg). The dermal absorption to PCBs for infants was calculated in around 3·10^-5 pg WHO-TEQ/kg·day, regardless the age. This value is > 10,000-fold lower than the dietary intake of PCBs, either through breastfeeding or food consumption. Furthermore, this exposure value would not pose any health risks for the infants wearing those bodysuits. Anyhow, as it is a very preliminary study, this should be confirmed by analyzing larger sets of textile samples. Further investigations should be also focused on the co-occurrence of PCBs and other toxic chemicals (i.e., formaldehyde, bisphenols and aromatic amines) in infant clothes.

Early-Life Exposure to Formaldehyde through Clothing

Clothes contain a wide range of chemicals, some of them potentially hazardous. Recently, there has been a growing interest in eco-friendly clothing, including the use of organic cotton. However, the process of eco-friendly fabric production does not exclude the use of toxic substances, such as formaldehyde, a known human carcinogen. The present investigation was aimed at determining the presence of formaldehyde in eco-friendly and conventional clothing of pregnant women, babies, and toddlers from the Catalan (Spain) market. The potential effects of washing were also investigated by comparing the reduction of formaldehyde in unwashed and washed clothing. Formaldehyde was detected in 20% of samples, with a mean level of 8.96 mg/kg. Formaldehyde levels were surprisingly higher in eco-friendly than in regular garments (10.4 vs. 8.23 mg/kg). However, these differences were only significant (p < 0.05) for bras (11.6 vs. 7.46 mg/kg) and panties (27.1 vs. 6.38 mg/kg) of pregnant women. Dermal exposure and health risks were assessed for three vulnerable population groups: pregnant women, babies, and toddlers. In general, exposure was higher in babies (up to 1.11 × 10−3 mg/kg/day) than in other groups (2.58 × 10−4 and 4.50 × 10−3 mg/kg/day in pregnant women and toddlers, respectively). However, both non-carcinogenic and carcinogenic risks were below the safety limits (<1 and <10−5, respectively) according to national regulations. Notwithstanding, although formaldehyde levels were below the legal limits (<75 mg/kg) and health risks were within acceptable ranges, clothing may contain other toxic substances in addition to formaldehyde, thus increasing the risks. Finally, since no formaldehyde was detected in washed textile samples, a safe and simple practice for the consumers is to wash clothing before the first use.

Indigo-A New Tribological Substance Class for Non-Toxic and Ecological Gliding Surfaces on Ice, Snow, and Water

The biogenic substance E-indigo can form supramolecular, hydrophobic structures using self-organization. These structures show a low coefficient of friction as a gliding layer against polar surfaces. The formation of primary particles with platelet morphology based on hydrogen-bonded E-indigo molecules is ideal to produce the gliding layer. Structures with excellent gliding properties can be achieved by means of directed friction and high pressure, as well as through tempering. The resulting hard, thin gliding layer of E-indigo does not easily absorb dirt and, thus, prevents a rapid increase in friction. Field tests on snow, with cross-country skis, have shown promising results in comparison to fluorinated and non-fluorinated waxes. Based on quantitative structure–activity relationship (QSAR) data for E-indigo, and its isomers and tautomers, it has been demonstrated that both the application and abrasion of the thin indigo layers are harmless to health, and are ecologically benign and, therefore, sustainable.

Nickel in terrestrial biota: Comprehensive review on contamination, toxicity, tolerance and its remediation approaches

Nickel (Ni) has been a subject of interest for environmental, physiological, biological scientists due to its dual effect (toxicity and essentiality) in terrestrial biota. In general, the safer limit of Ni is 1.5 μg g^-1 in plants and 75-150 μg g^-1 in soil. Litreature review indicates that Ni concentrations have been estimated up to 26 g kg^-1 in terrestrial, and 0.2 mg L^-1 in aquatic resources. In case of vegetables and fruits, mean Ni content has been reported in the range of 0.08-0.26 and 0.03-0.16 mg kg^-1. Considering, Ni toxicity and its potential health hazards, there is an urgent need to find out the suitable remedial approaches. Plant vascular (>80%) and cortical (<20%) tissues are the major sequestration site (cation exchange) of absorbed Ni. Deciphering molecular mechanisms in transgenic plants have immense potential for enhancing Ni phytoremediation and microbial remediation efficiency. Further, it has been suggested that integrated bioremediation approaches have a potential futuristic path for Ni decontamination in natural resources. This systematic review provides insight on Ni effects on terrestrial biota including human and further explores its transportation, bioaccumulation through food chain contamination, human health hazards, and possible Ni remediation approaches.

Antimony release from polyester textiles by artificial sweat solutions: A call for a standardized procedure

Polyester fibres are usually contaminated by antimony because of its use as a catalyst in the production of polyethylene terephthalate and as a flame retardant synergist in a variety of new and recycled polymers. The present study determined the release of antimony (at total concentrations ranging from about 125 to 470 μg g^-1) from polyester textile samples designed to be in contact with human skin using standard artificial sweat solutions (ISO 105-E04 and EN 1811). The study also examined the role of different experimental parameters on the release of the metalloid. Overall, and using the default parameters, between about 0.05 and 2% of total antimony (or 0.1-1 μg g^-1) was mobilized into artificial sweat. A reduction in time (from 24 to 12 h) and temperature (from 37 to 20 or 4 °C) and an increase in pH (from 5.5 to 7) resulted in a decline in antimony mobilization from textiles, while altering textile mass to solution volume and the presence of lactate had little impact on the results. Removal of a filtration step increased antimony mobilization but this was attributed to artefacts associated with release from microfibres during extract storage and analysis. In general, antimony mobilization was sufficiently repeatable using either EN 1811 or ISO 105-E04 but the latter is recommended for an assessment of antimony mobilization and potential exposure because its pH is closer to that of human sweat. Since the first fraction of either extractions mobilized the greatest quantity of antimony, exposure can be minimized by washing articles before use.

Human exposure to trace elements, aromatic amines and formaldehyde in swimsuits: Assessment of the health risks

Nowadays, most of the swimsuits are mainly made of artificial fibres, which have interesting properties such as water repellence and fast drying. Swimsuits contain a wide range of additives, which can mean a hazard for the environment and/or human health. In this study, the concentrations of formaldehyde (free and water soluble), 24 aromatic amines, and 28 trace elements (Ag, Al, As, B, Ba, Be, Bi, Cd, Co, Cr, Cu, Fe, Hg, Mg, Mn, Mo, Ni, Pb, Sb, Sc, Se, Sm, Sr, Sn, Tl, Ti, V and Zn) were analysed in 39 swimsuits covering a wide range of materials, colours and brands. Dermal exposure and health risks were assessed for adults (men and women) aged > 18 years old, babies between 2 and < 3 years old, children (boys and girls) between 3 and < 6 years old and 6 and < 11 years old, and teenagers (boys and girls) between 11 and < 16 years old, wearing swimsuits for 4 h or 8 h. Formaldehyde and aromatic amines were below their respective detection limits in all samples (<16 and < 1.5 mg/kg, respectively). Regarding trace elements, Ti showed the highest mean levels (1844 mg/kg), being significantly higher in polyamide (3759 mg/kg) than in polyester (24.1 mg/kg) swimsuits. These high Ti levels were confirmed by environmental scanning electron microscope in a single sample made of polyamide. Increased concentrations of Cr were also observed, but only in polyamide black fabrics, with values ranging from 624 to 932 mg/kg. Non-cancer risks (hazard quotients) derived from the exposure to trace elements were in a safe zone for all analysed trace elements. Furthermore, the carcinogenic risks were evaluated for As, Cr and Pb, exhibiting values below the 10^-5 threshold, with the exception of Cr in babies and children-girls. For Ti, health risks could not be calculated due to the lack of information on toxicological data. However, because Ti was the element with the highest concentrations in swimsuits, and taking into account the potential toxicity of TiO2 nanoparticles, further research is needed to assess the migration of this element from fibres to skin.

Hazardous heavy metals contamination of vegetables and food chain: Role of sustainable remediation approaches - A review

This review emphasizes the role of toxic metal remediation approaches due to their broad sustainability and applicability. The rapid developmental processes can incorporate a large quantity of hazardous and unseen heavy metals in all the segments of the environment, including soil, water, air and plants. The released hazardous heavy metals (HHMs) entered into the food chain and biomagnified into living beings via food and vegetable consumption and originate potentially health-threatening effects. The physical and chemical remediation approaches are restricted and localized and, mainly applied to wastewater and soils and not the plant. The nanotechnological, biotechnological and genetical approaches required to more rectification and sustainability. A cellular, molecular and nano-level understanding of the pathways and reactions are responsible for potentially toxic metals (TMs) accumulation. These approaches can enable the development of crop varieties with highly reduced concentrations of TMs in their consumable foods and vegetables. As a critical analysis by authors observed that nanoparticles could provide very high adaptability for both in-situ and ex-situ remediation of hazardous heavy metals (HHMs) in the environment. These methods could be used for the improvement of the inbuilt genetic potential and phytoremediation ability of plants by developing transgenic. These biological processes involve the transfer of gene of interest, which plays a role in hazardous metal uptake, transport, stabilization, inactivation and accumulation to increased host tolerance. This review identified that use of nanoremediation and combined biotechnological and, transgenic could help to enhance phytoremediation efficiency in a sustainable way.