Chemical profiles of PM2.5 emitted from various anthropogenic sources of the Eastern Mediterranean: Cooking, wood burning, and diesel generators

Aerosol characterization and peculiarities of source apportionment in Moscow, the largest and northernmost European megacity

High population and a wide range of activities in a megacity lead to large-scale ecological consequences which require the assessment with respect to distinct characteristics of climate, location, fuel consumption, and emission sources. In-depth study of aerosol characteristics was carried out in Moscow, the largest megacity in Europe, during the cold period (autumn and winter) and in spring. PM10 chemical speciation based on carbonaceous matter, water-soluble ions, and elements was carried out to reconstruct the PM mass and evaluate the primary and secondary aerosol contribution. For the whole study period organic matter, mineral dust, and secondary inorganic/organic accounted for 34, 24, and 16 % of PM10 mass, respectively. PM10, OC, and EC approached a maximum in spring and decreased in winter. Mineral dust seasonal fraction increased from spring (17 %) to autumn (32 %), and then decreased in winter (22 %). Secondary inorganic aerosols (SIA) in opposite showed the maximum 27 % in winter. K+ marked the residential biomass burning in the region surrounding a megacity in spring and autumn, agriculture fires in spring. In winter primary aerosol contribution dropped down 56 % while secondary approached practically equal 44 %. Source factors with the relative contributions are quantified, namely city dust (26 %), traffic (23 %), industrial (20 %), biomass burning (12 %), secondary (12 %), and de-icing salt (7 %); they were significantly varying between the cold heating period and springtime. The relevance of sources to meteorological parameters and mass transportation is investigated by using both bivariate polar plots and Lagrangian integrated trajectory (HYSPLIT) model. Trajectory clustering demonstrates regional sources being crucial contributors to PM10 pollution. Aerosol speciation and source apportion factors identify the differences of the Moscow urban background among large European and Asian cities due to northern climate conditions, fast construction, long-range transport from industrial-developing area surrounding a city, regional biomass burning preferably in spring and autumn, and winter road management.

Enhanced removal organic compounds and particles from cooking fume using activated sludge scrubber filled loofah: From performance to the mechanism

The catering industry's growth has resulted in cooking fume pollution becoming a major concern in people's lives. As a result, its removal has become a core research focus. Natural loofah is an ideal biofilm carrier, providing a conducive environment for microorganisms to grow. This study utilized natural loofah to fill domesticated activated sludge in a bioscrubber, forming biofilms that enhance the ability to purify cooking fume. This study found that the biomass of loofah biofilms per gram is 104.56 mg. The research also determined the removal efficiencies for oils, Non-methane total hydrocarbons (NMHC), PM2.5, and PM10 from cooking fumes, which were 91.53%, 67.53%, 75.25%, and 82.23%, respectively. The maximum elimination capacity for cooking fumes was found to be 20.7 g/(m3·h). Additionally, the study determined the kinetic parameters for the biodegradation of oils (Kc and Vmax) to be 4.69 mg L-1 and 0.026 h-1, respectively, while the enzyme activities of lipase and catalase stabilized at 75.50 U/mgprots and 67.95 U/mgprots. The microbial consortium identified in the biofilms belonged to the phylum Proteobacteria and consisted mainly of Sphingomonas, Mycobacterium, and Lactobacillus, among others.

Seasonality of Polyaromatic Hydrocarbons (PAHs) and Their Derivatives in PM2.5 from Ljubljana, Combustion Aerosol Source Apportionment, and Cytotoxicity of Selected Nitrated Polyaromatic Hydrocarbons (NPAHs)

Airborne particulate matter (PM) is a vector of many toxic pollutants, including polyaromatic hydrocarbons (PAHs) and their derivatives. Especially harmful is the fine fraction (PM_2.5), which penetrates deep into the lungs during inhalation and causes various diseases. Amongst PM_2.5 components with toxic potential are nitrated PAHs (NPAHs), knowledge of which is still rudimentary. Three of the measured NPAHs (1-nitropyrene (1-nP), 9-nitroanthracene (9-nA), and 6-nitrochrysene (6-nC)) were detected in ambient PM_2.5 from Ljubljana, Slovenia, along with thirteen non-nitrated PAHs. The highest concentrations of pollutants, which are closely linked with incomplete combustion, were observed in the cold part of the year, whereas the concentrations of NPAHs were roughly an order of magnitude lower than those of PAHs throughout the year. Further on, we have evaluated the toxicity of four NPAHs, including 6-nitrobenzo[a]pyrene (6-nBaP), to the human kidney cell line, HEK293T. The most potent was 1-nP (IC₅₀ = 28.7 µM), followed by the other three NPAHs, whose IC₅₀ was above 400 or 800 µM. According to our cytotoxicity assessment, atmospheric 1-nP is the most harmful NPAH among the investigated ones. Despite low airborne concentrations of NPAHs in ambient air, they are generally considered harmful to human health. Therefore, systematic toxicological assessment of NPAHs at different trophic levels, starting with cytotoxicity testing, is necessary in order to accurately evaluate their threat and adopt appropriate abatement strategies.

Insights into seasonal-variability of SVOCs, morpho-elemental and spectral characteristics of PM2.5 collected at a dense industrial site: Faridabad, Haryana, India

The development-oriented anthropogenic activities have led to intensive increase in emission of various organic pollutants, which contribute considerably to human health risk. In the present study, chemical, physical and spectral characterisation of fine particulate matter (PM_2.5), collected at Faridabad city, in northern India, were examined. Seasonal variation of organic compounds [n-alkanes, polyaromatic hydrocarbons (PAHs) and phthalic acid esters (PAEs)], and potential health risk of Polyaromatic hydrocarbons (PAHs) exposure using toxic equivalency potential (TEQ) approach had been assessed. These showed seasonal average values ranging from 156.4 ± 57.0 ng/m³ to 217.6 ± 72.9 ng/m³, 98.0 ± 21.4 ng/m³ to 177.8 ± 72.8 ng/m³, and 30.9 ± 11.9 ng/m³ to 82.5 ± 29.2 ng/m³, respectively, with the highest value for winter. It is noteworthy that unlike, n-alkanes and PAEs, PAHs were least during spring. The high molecular weight PAHs (BaP, BkF, DahA and IcdP) were found to exhibit higher TEQ values (ranging from 0.7 to 9.7) despite of their lower concentrations. The PAH diagnostic ratio, carbon preference index and total index revealed the enhanced impact of biogenic sources of emissions in comparison to diesel emission sources during winter.

Low carbon footprint preparation of MXene incorporated lignocellulosic fibers for high thermal conductivity applications

New wood-based composite materials with thermal conductivity are greatly desired in the fields of packaging materials for electronic components. In this study, a new multifunctional composite material (M@FC) is prepared by simply blending clay-like Ti₃C₂T_x MXene and delignified wood fibers together, and then followed by an infusing epoxy resin with environmentally friendly vacuum assisted resin transfer molding (VARTM) process. The resulting M@FC (0.92 W m^-1 K^-1) possesses superior thermal conductivity as compared to natural wood (0.099 W m^-1 K^-1) and most polymers. Furthermore, after the VARTM process, the structure of the M@FC is tighter, and thus showing excellent mechanical properties (tensile strength of 93.0 MPa and flexural strength of 172.7 MPa). In addition, good water resistance and excellent flame retardant property are observed for M@FC. The improvement of thermal conductivity provides the possibility for its application for packaging materials in electronic components. This study using waste wood as the important component provides a new idea for carbon cycling and recycling of natural resources.

Characteristics and health impacts of PM2.5-bound PCDD/Fs in three Asian countries

Polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) were ubiquitous, persistent chemical compounds attached to particulate matter in the atmosphere. We aimed to study the characteristics of these pollutants in atmospheric PM_2.5 of three Asian countries, including Taiwan (Taipei), Thailand (Chiang Mai), and Vietnam (Hanoi). We carried out a source apportionment analysis to determine significant PCDD/F contributors in these areas. Multiple media model was conducted to access the health impact assessment. The PM_2.5 concentration in Taipei (n = 7), Chiang Mai (n = 20), and Hanoi (n = 10) were 18.4 ± 6.21 μg/m³, 133 ± 49.5 μg/m³, and 88.1 ± 12.6 µg/m³, respectively. The PCDD/Fs level in Hanoi was 92.4 ± 67.3 fg I-TEQ/m^3, and in Taipei and Chiang Mai was 5.01 ± 2.39 fg I-TEQ/m³ and 14.4 ± 13.1 fg I-TEQ/m³, respectively, which showed that the higher PM_2.5 concentration was not necessary to follow with higher PCDD/Fs level. In all three cities, the effect of traffic on ambient PCDD/F level was significant (23-25 %). However, we also observed the specific sources of PCDD/Fs in each city during the sampling periods, namely long-range transport (Taipei, 55 %), Biomass/open burning (Chiang Mai, 77 %), and industrial activities (Hanoi, 34 %). In the carcinogenic risk estimation, the highest median total carcinogenic risk was in Hanoi (5.87 × 10^-6), followed by Chiang Mai (1.06x10^-6), and Taipei (2.95 × 10^-7). Although diet was the major absorption pathway, the food contributor of exposure differed among the three areas due to the difference in food consumption composition.

Effect of Short- to Long-Term Exposure to Ambient Particulate Matter on Cognitive Function in a Cohort of Middle-Aged and Older Adults: KoGES

Exposure to ambient air pollution and its threat to human health is a global concern, especially in the elderly population. Therefore, more in-depth studies are required to understand the extent of the harmful effects of particulate matter (PM) based on duration and levels of exposure. An investigation was conducted to determine the association between short- (1-14 days), medium- (1, 3, and 6 months), and long-term (1, 2, and 3 years) exposure to air pollutants (PM_2.5 and PM₁₀) and cognitive function among Koreans (4175 participants, mean age 67.8 years, 55.2% women) aged over 50 years. Higher levels of PM_2.5 exposure for short to long term and PM₁₀ exposure for medium to long term were found to be associated with decreased cognitive function, as indicated by lower scores of the Mini-Mental State Examination adopted in Korean (K-MMSE). There were significant effect modifications by sex, age group, alcohol consumption, physical activity, and smoking status in the association between long-term PM_2.5 and PM₁₀ exposure and cognitive function. These findings, which underscore the importance of the efforts to reduce the exposure levels and durations of air pollutants, especially in the vulnerable elderly population, provide evidence for establishing more stringent policies for air pollution regulations.