Direct red 89 dye degradation by advanced oxidation process using sulfite and zero valent under ultraviolet irradiation: Toxicity assessment and adaptive neuro-fuzzy inference systems modeling

Harnessing bromide ions to boost peroxymonosulfate for reactive yellow 145 dye degradation

Bromide (Br-) was found in the fresh waters at concentrations from 0.1 to 1 mg/L and can be used to activate peroxymonosulfate (PMS) as a widely used chemical oxidation agent. In the present study, the reaction between PMS and Br- ions (PMS/Br- process) for the effective degradation of reactive yellow 145 (RY-145) dye was investigated by changing operational parameters vis solution pH, dosage of Br- ions and PMS, RY-145 concentration, and reaction time. Based on the results, the simultaneous presence of PMS and Br- ions in the solution led to efficient degradation of RY-145 with a synergistic index of 11.89. The degradation efficiency of RY-145 was decreased in severe basic pH and the presence of CO32- ions as a coexisting anion. Likewise, 4 mg/L of humic acid (HA), used as a classic scavenger, led to a 26.53% decrease in the RY-145 degradation efficiency. The free bromine (HOBr/OBr-), superoxide radical (●O2-), and singlet oxygen (1O2) was the dominant oxidation agents in RY-145 degradation, which confirmed the nonradical degradation pathway. In addition, PMS/Br- process showed excellent ability in mineralizing RY-145 in different aqueous solutions (total organic carbon (TOC) decreased 86.39% in deionized water and 78.23% in tap water). Although pollutants such as azo dyes can be effectively removed in the PMS/Br- process, the formation of byproducts should be strategically controlled and special attention should be paid when the PMS-based advance oxidation process is applied to treat Br- containing solutions.

Unique effect of bromide ion on intensification of advanced oxidation processes for pollutants removal: A systematic review

Advanced oxidation processes (AOPs) have been developed to decompose toxic pollutants to protect the aquatic environment. AOP has been considered an alternative treatment method for wastewater treatment. Bromine is present in natural waters posing toxic effects on human health and hence, its removal from drinking water sources is necessary. Of the many techniques advanced oxidation is covered in this review. This review systematically examines literature published from 1997 to April 2024, sourced from Scopus, PubMed, Science Direct, and Web of Science databases, focusing on the efficacy of AOPs for pollutant removal from aqueous solutions containing bromide ions to investigate the impact of bromide ions on AOPs. Data and information extracted from each article eligible for inclusion in the review include the type of AOP, type of pollutants, and removal efficiency of AOP under the presence and absence of bromide ion. Of the 1784 documents screened, 90 studies met inclusion criteria, providing insights into various AOPs, including UV/chlorine, UV/PS, UV/H2O2, UV/catalyst, and visible light/catalyst processes. The observed impact of bromide ion presence on the efficacy of AOP processes, alongside the AOP method under scrutiny, is contingent upon various factors such as the nature of the target pollutant, catalyst type, and bromide ion concentration. These considerations are crucial in selecting the best method for removing specific pollutants under defined conditions. Challenges were encountered during result analysis included variations in experimental setups, disparities in pollutant types and concentrations, and inconsistencies in reporting AOP performance metrics. Addressing these parameters in research reports will enhance the coherence and utility of subsequent systematic reviews.

Ultra-efficient peroxymonosulfate utilization and trichloroethylene degradation in heterogeneous catalytic system guided by sheet-like Cu2MnO4 nanoparticles: The role of Cu(III)-O species and free radicals

Synthesizing cubic spinel Cu2MnO4 with nanosheet structure (SCMO) aimed to construct a "non-radical-mediated radical-oxidative reaction", for increasing PMS utilization efficiency, and solving the defects of SO4•- and •OH through indirect PMS activation by electron transfer process. Compared with box-like Cu2MnO4 (11.1%, 0.0035 min-1) and ordinary Cu2MnO4 nanoparticles (21.3%, 0.0070 min-1), SCMO/PMS showed excellent trichloroethylene removal (98.8%, 0.1577 min-1). The pivotal role of Cu(III) was determined based on EPR analysis, quenching experiments, chemical probe experiments, hydrogen temperature-programmed reduction and Raman spectroscopy analysis, in-situ FTIR and Raman analyses. In brief, the interaction between PMS and SCMO could produce surface-bonded reactive complexes and the subsequent breaking of O-O bond in the sub-stable structure allowed the conversion of Cu(II) to Cu(III), which in turn facilitates the generation of •OH and SO4•-. The density functional theory (DFT) calculations provided supporting evidence for the electron donor role of SCMO and the increase of the electron acceptance capacity of PMS. SCMO/PMS system showed good resistance and degradation efficiency to complex composition and combined pollutants in actually contaminated groundwater, respectively. However, the coexistence of high concentrations of arsenic could significantly affect SCMO performance due to their adsorption on -OH groups, which still need in-depth study.

Visible light irradiation enhanced sulfidated zero-valent iron/peroxymonosulfate process for organic pollutant degradation

This study developed a novel process named sulfidated zero-valent iron/peroxymonosulfate/visible light irradiation (S-mZVI/PMS/vis) for enhanced organic pollutant degradation. The S-mZVI/PMS/vis process exhibited remarkable catalytic activity, achieving a 99.6% rhodamine B (RhB) removal within 10 min. The degradation rate constant of RhB by the S-mZVI/PMS/vis process was found to be 6.49 and 79.84 times higher than that by the S-mZVI/PMS and PMS/vis processes, respectively. Furthermore, the S-mZVI/PMS/vis process worked efficiently across a wide pH range (3.0-9.0), and the result of five-cycle experiments demonstrated the excellent reusability and stability of S-mZVI. Radical quenching tests and electron paramagnetic resonance analysis indicated that ·O2-, 1O2, and h+ significantly contributed to the degradation of RhB through the S-mZVI/PMS/vis process. The visible light irradiation increased the Fe2+ concentration, improved the Fe3+/Fe2+ cycle, and consequently enhanced the PMS decomposition, reactive species production, and RhB degradation. This work offers a promising strategy to highly efficiently activate PMS for organic pollutants elimination from aqueous solutions.

A novel nanocomposite for photocatalytic rhodamine B dye removal from wastewater using visible light

Providing safe access to water and addressing the impact of waterborne diseases, which claim over two million lives annually, is a major contribution to water purification. The study introduces a novel nanocomposite, Ch/Fe3O4/α-MoO3, which exhibits outstanding photocatalytic efficacy under visible light. An in-depth investigation of the nanocomposite's synthesis, characterization, and photodegradation mechanisms reveals its outstanding capabilities. Photocatalytic activity is influenced by the catalytic dose, pH, dye concentration, and reaction time, according to the study. A response surface method is used to determine the optimal conditions for Rhodamine B degradation, which results in 96.3% removal efficiency at pH 8.5, dye concentration 25 mg/L, nanocomposite dose at 22 mg/L, and reaction time 50 min. As a result of its high surface area, biocompatibility, availability, and magnetization with iron compounds, Chitosan is an excellent substrate for enhancing the photocatalytic properties of MoO3 nanoparticles. A nanocomposite with an energy band of 3.18 eV exhibits improved visible light absorption. This study confirms the nanocomposite's recyclability and stability, affirming its practicality. Besides dye removal, it offers hope for the global quest for clean water sources by addressing a broader range of waterborne contaminants. By combining molybdenum and magnetite, nanocomposite materials facilitate the degradation of pollutant and bacteria, contributing positively to society's quest for clean and safe water. It emphasizes the role nanotechnology plays in preserving human health and well-being in combating waterborne diseases.

New insights on the decolorization of waste flows by Saccharomyces cerevisiae strain - A systematic review

One of the common causes of water pollution is the presence of toxic dye-based effluents, which can pose a serious threat to the ecosystem and human health. The application of Saccharomyces cerevisiae (S. cerevisiae) for wastewater decolorization has been widely investigated due to their efficient removal and eco-friendly treatments. This review attempts to create an awareness of different forms and methods of using Saccharomyces cerevisiae (S. cerevisiae) for wastewater decolorization through a systematic approach. Overall, some suggestions on classification of dyes and related environmental/health problems, and treatment methods are discussed. Besides, the mechanisms of dye removal by S. cerevisiae including biosorption, bioaccumulation, and biodegradation and cell immobilization methods such as adsorption, covalent binding, encapsulation, entrapment, and self-aggregation are discussed. This review would help to inspire the exploration of more creative methods for applications and modification of S. cerevisiae and its further practical applications.

Mesoporous bimetallic S-doped nanoparticles prepared via hydrothermal method for enhanced photodegradation of 4-chlorophenol

Magnesium oxides (MgO) have gained shown significant promise for a variety of applications, which can be modified by ions doping. In this study, bimetallic Ag-doped S-MgO nanoparticles were prepared by hydrothermal method and used for photocatalytic degradation of 4-chlorophenl (4-CP). EDX suggested the presence of no impurities, which mainly contained Mg, Ag, and S elements, suggesting that S and Ag were incorporated into the lattice of MgO as a result of successful doping. Estimated bandgap of Ag-doped S-MgO nanoparticles was 3.7 eV, lower than MgO (7.8 eV), but useful to improve optical characteristics and photocatalytic efficiency to degrade 4-CP up to a maximum of 99.60 ± 0.50%. The synergetic parameter during photocatalysis of 4-CP was 6.91, confirming the degradation of 4-CP. Quenching experiments proved the presence of hydroxyl radicals (•OH) and singlet dioxygen (1O2) that were critical in 4-CP degradation. The kinetics rate constant was increased by 24.8% from 0.086 ± 0.004 to 0.108 ± 0.005 min-1 by the addition of sulfate in the reaction medium. The work proposes a new synthetic method for preparing catalysts that are capable of producing in-situ •OH radicals and 1O2 to decompose the organic contaminants.

NiFe-PANI composites synthesized by electrodeposition for enhanced photocatalytic degradation of diclofenac sodium from wastewater

A simple inexpensive approach was used to synthesize NiFe-PANI nanocomposites and used for photodegradation of diclofenac sodium (DCF) in water sources. Morphological, optical, structural, and catalytic properties of the nanocomposites were investigated using X-ray diffraction (XRD) to confirm the cubic structure of NiFe nanoparticles and Fourier-transform infrared spectroscopy (FTIR) that revealed the presence of NiFe and PANI, scanning electron microscopy (SEM) showed the uniform distribution of NiFe nanoparticles onto the surface of PANI, Energy-Dispersive X-ray spectroscopy (EDX) was utilized to validate the composition of the obtained Permalloy NiFe-PANI nanocomposites, optical properties confirmed the decrease of Eg band gap from 2.62 to 2.51 eV by the addition of NiFe. The NiFe-PANI composite showed superior photocatalytic efficiency in degrading DCF, achieving 82.53% degradation in 15 min and 97.89% in 60 min. This was significantly higher than the PANI alone, which achieved 62.72 and 93.48% degradation in the same time intervals respectively. The results indicated that the photocatalytic efficiency remained consistent, with no observable decrease, even after five cycles of recycling. The NiFe-PANI catalyst served as an efficient and cost-effective photocatalyst for DCF degradation, and the study holds promise for the photocatalytic removal of other organic pollutants from water and wastewater.

Efficient removal of naphthenic acids from real petroleum wastewater by natural pyrite activated persulfate system

The petroleum wastewater (PWW) contains a diverse range of recalcitrant organic contaminants. Of particular concern is the removal of naphthenic acids (NAs) due to the high toxicity and persistence. Persulfate (PS) based oxidation processes have shown promising in treating refractory wastewater, while the high costs of prepared catalysts limited their widespread implementation. This study aims to develop a cost-effective natural pyrite activated PS system for PWW treatment. The removal of NAs by pyrite/PS system was initially investigated. More than 90% of cyclohexanoic acid (CHA), a model NA, was removed in pyrite/PS system (2.0 g/L pyrite, 4.0 mM PS) at initial pH of 3-11. Scavenging experiments revealed that Fe(II) on pyrite surface was the reactive site for PS activation to generate reactive species, including sulfate radical (SO4·-), Fe(IV) and hydroxyl radical (·OH) for CHA degradation. Reactions of Fe(III) with S helped restore Fe(II) and enhance PS activation, resulting in the sustained catalytic activity of pyrites over five cycles. Cl-, SO42- and NO3- below 10 mM had minimal impact on CHA degradation in pyrite/PS system. However, over 1 mM of HCO3- inhibited 80% of CHA removal due to the buffer effect to maintain the high solution pH. Removing HCO3- from real PWW restored the removal of CHA and of total organic carbon (TOC) to over 90% and 71.3% in pyrite/PS system, respectively. Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) results indicated that O2‒6 species including NAs were primarily eliminated through mineralization and oxygen addition. Besides, O3-5S, NO3-5S and N3O2‒4 species were the most susceptible to oxidation in PWW, resulting in the increase of the oxidation level (i.e., O/Cwa) from 0.41 to 0.56 after treatment. This study provides valuable insights into the treatment of NAs in real PWW, and potential application of natural minerals in the treatment of industrial wastewater.

Green synthesis of zero valent iron using tannins to activate persulfate for sulfamethoxazole degradation

Majority zero-valent iron (ZVI) materials are prepared by reducing agents in liquid phase, resulting in the high environmental pollution and poor particle size distribution uniformity. Therefore, this study employed a green synthesis method to prepare ZVI. Tannins (TA) with phenolic hydroxyl groups that are characterized by strong reducing capacity were employed to synthesize ZVI (TA@ZVI). The dispersity and stability of ZVI was improved by TA, which inhibited the agglomeration of ZVI. Meanwhile, the specific surface area of TA@ZVI was higher than chemical prepared ZVI, increasing the reactive sites. The organic matter components enriched on TA could promote the adsorption of pollutants and complex with Fe(II/III) to enhance the reactivity of TA@ZVI. Also, the polyphenol structure in TA was oxidized to quinone, which facilitated electron transport. In order further test the performance of TA@ZVI, SMX was chosen as a target pollutant to study the oxidative degradation performance of TA@ZVI. SO4•- degraded about 16.4%-25.5% SMX and •OH degraded about 49.8%-63.9% SMX in the pH range of 4-6 while •OH played a dominant role in the neutral and alkaline conditions. Moreover, the presence of TA reduced Fe(III) to Fe(II) and promoted the release of Fe(II), providing a continuous source of •OH for the oxidative degradation of SMX. Besides, the conversion of Fe(II/III) was accelerated due to TA, which delayed the formation of passivation layer. Thus, TA enhanced the antioxidant capacity of ZVI. Generally, this study provided an environmental-friendly technology to synthesize and improve the reactivity of ZVI.

Hydrothermally improved natural manganese-containing catalytic materials to degrade 4-chlorophenol

Natural manganese-containing mineral (NMM) was used as a catalyst in heterogeneous catalytic ozonation for 4-chlorophenol (4-CP) degradation. The surface and structural properties of NMM were modified by the hydrothermal aging process and called H-NMM. The catalytic activity of NMM and H-NMM were evaluated for the catalytic ozonation process (COP). The synergistic effect of NMM and H-NMM in ozonation processes for 4-CP degradation under optimal conditions (pH of 7, 1 g/L of NMM and H-NMM, 0.85 mg/min of O₃, and 15 min of reaction time) was measured by 3.04 and 4.34, respectively. During the hydrothermal process, Mn⁴⁺ and Fe²⁺ were converted to Mn²⁺ and Fe³⁺, which caused better performance of the H-NMM than the NMM. During the catalytic ozonation process, Mn²⁺ is completely oxidized, which increases the production of Hydroxyl radical (•OH). The reactive oxygen species (ROS) generated in the system were identified using radical scavenging experiments. •OH, superoxide radical (•O₂^-), and singlet oxygen (¹O₂) represented the dominant reactive species for 4-CP degradation. The O₃/H-NMM process indicated a powerful ability in the mineralization of 4-CP (66.31% of TOC degradation). H-NMM exhibited excellent stability and reusability in consecutive catalytic cycles, and the NMM exhibited desirable performance. This study offers NMM and H-NMM as effective, stable, and competitive catalysts for hastening and enhancing the ozonation process to mitigate environmentally related pollutants of high concern.

Hydrodynamic cavitation coupled with zero-valent iron produces radical sulfate radicals by sulfite activation to degrade direct red 83

In the present research, hydrodynamic cavitation (HC) and zero-valent iron (ZVI) were used to generate sulfate radicals through sulfite activation as a new source of sulfate for the efficient degradation of Direct Red 83 (DR83). A systematic analysis was carried out to examine the effects of operational parameters, including the pH of the solution, the doses of ZVI and sulfite salts, and the composition of the mixed media. Based on the results, the degradation efficiency of HC/ZVI/sulfite is highly dependent upon the pH of the solution and the dosage of both ZVI and sulfite. Degradation efficiency decreased significantly with increasing solution pH due to a lower corrosion rate for ZVI at high pH. The corrosion rate of ZVI can be accelerated by releasing Fe2+ ions in an acid medium, reducing the concentration of radicals generated even though ZVI is solid/originally non-soluble in water. The degradation efficiency of the HC/ZVI/sulfite process (95.54 % + 2.87%) was found to be significantly higher under optimal conditions than either of the individual processes (<6% for ZVI and sulfite and 68.21±3.41% for HC). Based on the first-order kinetic model, the HC/ZVI/sulfite process has the highest degradation constant of 0.035±0.002 min-1. The contribution of radicals to the degradation of DR83 by the HC/ZVI/sulfite process was 78.92%, while the contribution of SO4•- and •OH radicals was 51.57% and 48.43%, respectively. In the presence of HCO3- and CO32- ions, DR83 degradation is retarded, whereas SO42- and Cl- ions promote degradation. To summarise, the HC/ZVI/sulfite treatment can be viewed as an innovative and promising method of treating recalcitrant textile wastewater.

Degradation of 2,4-diclorophenol via coupling zero valent iron and hydrodynamic cavitation for sulfite activation: A turbulence modeling

The 2,4-dichlorophenol (2,4-DCP) is an important chemical precursor that can affect human endocrine system and induce pathological symptoms. This research reports the degradation of 2,4-DCP using lab-scale hydrodynamic cavitation (HC) approach, which is considered a green and effective method. To promote the degradation efficiency, the zero-valent iron (Fe⁰) as the catalyst for sulfate radical (SO₄^•-) generation via activation of sulfite (SO₃^2-) salts was simultaneously used. Degradation efficiency was favorable in acidic pH than the alkaline pH due to higher production of active radicals and was dependent on the dose of Fe⁰ and SO₃^2-. Under optimal condition, degradation efficiency by Fe⁰/HC/sulfite (96.67 ± 2.90%) was considerably enhanced compared to HC alone (45.37 ± 2.26%). Quenching experiments suggested that SO₄^•-, ^•OH, ¹O₂, and O₂^•- radicals were involved in the degradation of 2,4-DCP by Fe⁰/HC/sulfite process, but the dominant role was related to ^•OH (70.09% contribution) and SO₄^•- (29.91% contribution) radicals. From the turbulence model, turbulent pressure at venturi throat decreased from -0.42 MPa to -2.02 MPa by increasing the inlet pressure from 1.0 to 4.0 bar and increase in pressure gradient has intensified bubble collapse due to higher turbulence tension.

Potential of low-cost TiO2-PVC composite in photoelectrocatalytic degradation of reactive orange 16 under visible light

In recent years, previously reported studies revealed a high efficiency of pollutant degradation by coupling photocatalysis and electrochemical processes (PECs) using titanium dioxide (TiO₂) photoelectrode rather than using photocatalysis or electrocatalysis alone. However, some of the TiO₂ photoelectrodes that have been reported were not cost-effective. This is due to the use of expensive chemicals and certain expensive equipment in the fabrication process, other than involving complicated preparation steps. Therefore, this study is aimed at investigating the PEC performance and stability of low-cost TiO₂-polyvinyl chloride (TiO₂-PVC) composite photoelectrode for Reactive Orange 16 (RO16) degradation. The materials characterisation using the ATR-FTIR, XRD and UV-Vis DRS proved that TiO₂ and TiO₂-PVC were successfully synthesised. The micrograph obtained for the surface characterisation using the FESEM showed that the smooth surface of freshly prepared photoelectrodes turned slightly rough with tiny pits formation after five continuous PEC processes. Nevertheless, the photoelectrode retained its original shape in good condition for further PEC processes. By PEC process, the fabricated photoelectrode showed 99.4% and 51.1% of colour and total organic carbon (TOC) removal, respectively, at optimised PEC parameters (1.0 mol L^-1 NaCl concentration, 10 V applied voltage, 120 min degradation time and initial pH 2). Moreover, the fabricated photoelectrode demonstrated sufficient reusability potential (~ 96.3%) after five cycles of PEC processes. In summary, a low-cost and stable composite photoelectrode with high efficiency in RO16 degradation was successfully fabricated and could be potentially applied for other emerging pollutants degradation via the PEC degradation technique.

Photocatalytic activity of visible-light-driven L-Proline-TiO2/BiOBr nanostructured materials for dyes degradation: The role of generated reactive species

L-Proline (2%)-TiO₂/BiOBr (30%) nanocomposite was synthesized to obtain high photocatalytic performance in the visible light region and infrared radiation(IR) for methylene blue (MB) and congo red (CR) removal from the contaminated wastewater. L-Proline (2%)-TiO₂/BiOBr (30%) photocatalyst with strong absorption near IR wavelength and high charge separation ability was fabricated for the first time. X-ray diffraction (XRD), Fourier transform infrared (FTIR), field-emission scanning electron microscope (FESEM)/Energy Dispersive X-ray (EDX), UV-Vis diffuse reflectance spectrum (DRS), photoluminescence (PL) and Brunauer-Emmett-Teller (BET) characterization techniques show that the visible driven nanocomposite was successfully synthesized. According to the UV-DRS analysis, the estimated band gaps for the L-proline (2%)-TiO₂ and L-Proline (2%)-TiO₂/BiOBr (30%) nanostructures were respectively 2.3 eV and 2.1 eV.The nanoparticles exhibited enhanced photocatalytic activity (93-100%) and high mineralization efficiency (71-89% TOC removal) for both the dyes. The best photocatalytic activity was achieved by adding 2 wt% of L-Proline and 30 wt% of BiOBr into TiO₂ sol. Response surface methodology (RSM) was employed to find significant parameters and their optimum values for maximum degradation, which show pH, dye concentration, irradiation time, and catalyst dosage for both the dyes are significant. The best photocatalytic degradation efficiency was achieved at the optimum conditions of pH = 7.7, catalyst dosage = 0.71 g/L, irradiation time = 142 and dye concentration = 11 mg/L for MB. Scavenger study showed that •OH radicals are responsible for the degradation process.

Degradation of 4-chlorophenol using MnOOH and γ-MnOOH nanomaterials as porous catalyst: Performance, synergistic mechanism, and effect of co-existing anions

Transition metal catalysts have been proven to be a highly-potent catalyst for peroxymonosulfate (PMS) activation. The present work aimed to synthesizes the γ-MnOOH and MnOOH based on the one-pot hydrothermal method as PMS activators for efficient degradation of 4-chlorophenol (4-CP). The effect of operational parameters including solution pH, γ-MnOOH and MnOOH dose, PMS dose, 4-CP concentration, and also mixture media composition was elaborated. The results showed that the combination of MnOOH and γ-MnOOH with PMS noticeably creates a synergistic effect (SF) in 4-CP degradation by both PMS/MnOOH and PMS/γ-MnOOH process, with a SF value of 48.14 and 97.42, respectively. In both systems, the removal of 4-CP decreased in severely alkaline and acidic conditions, while no significant changes were observed in pH 5 to 9. Also, coexisting PO₄³- significantly reduced the removal efficiency of both systems. In addition, the effect of humic acid (HA) as a classical scavenger was investigated and showed that presence of 4 mg/L HA reduced the removal efficiency of 4-CP in the PMS/MnOOH process from 97.44% to 79.3%. The three consecutive use of both catalysts turned out that MnOOH has better stability than γ-MnOOH with lower Mn ions leaching. More importantly, quenching experiment showed that both non-radical (¹O₂ and O₂^-) and radical (SO₄^- and OH) pathways are involved in 4-CP degradation and non-radical pathway was the dominant one in both systems.

Recent advances in the removal of dyes from wastewater using low-cost adsorbents

The presence of hazardous dyes in wastewater cause disastrous effects on living organisms and the environment. The conventional technologies for the remediation of dyes from water have several bottlenecks such as high cost and complex operation. This review aims to present a comprehensive outlook of various bio-sorbents that are identified and successfully employed for the removal of dyes from aqueous environments. The effect of physicochemical characteristics of adsorbents such as surface functional groups, pore size distribution and surface areas are critically evaluated. The adsorption potential at different experimental conditions of diverse bio-sorbents has been also explored and the influence of certain key parameters like solution pH, temperature, concentration of dyes, dosage of bio-sorbent and agitation speed is carefully evaluated. The mechanism of dyes adsorption, regeneration potential of the employed bio-sorbents and their comparison with other commercial adsorbents are discussed. The cost comparison of different adsorbents and key technological challenges are highlighted followed by the recommendations for future research.

Sulfite activation by cobaltosic oxide nanohydrangeas for tetracycline degradation: Performance, degradation pathways and mechanism

Sulfite has been used as a classic reductant for the dehalogenation and reduction of organic compounds for a long time, it is recently deemed as a promising alternative (for persulfate) to generate sulfate radical for wastewater treatment due to its low price and eco-toxicity. In contrast with the enormous work developed in the field of tetracycline (TC) degradation via PMS activization, sulfite activization could play a important role in TC degradation but there is only very few available reports in this area. Herein, the novel and efficient CoNHs nanocatalyst is designed and developed, via immobilization of hydrangea-shaped Co₃O₄ nanoparticles onto graphitic carbon nanosheet (GCN), for the degradation of tetracycline via sulfite activation. The detailed characterizations have confirmed that CoNHs possesses a nanohydrangea-shaped structure with high microporosity. The comparison with other supports (such as CeO₂ and MoS₂), CoNHs provides the highest degradation efficiency in TC degradation, due to the synergistic effect between Co₃O₄ and GCN. Free radical quenching experiments and EPR analysis confirm that SO₄•^- and O₂•^- are major reactive oxygen species in the CoNHs/sulfite system. This work could provide a simple, economical and durable cobalt-based catalyst for organic wastewater treatment via sulfite activation.