A self-healing transparent polydimethylsiloxane elastomer based on imine bonds

Self-Healing Polymers Coupling Shape Memory Effect

In recent years, shape memory polymers (SMPs) and self-healing polymers (SHPs) have been research hotspots in the field of smart polymers owing to their unique stimulus response mechanisms. Previous research on SHPs has primarily focused on contact repair. However, in instances where substantial cracks occur during practical use, autonomous closure becomes challenging, impeding effective repair. By integration of the shape memory effect (SME) with SHPs, physical wound closure can be achieved via the SME, facilitating subsequent chemical/physical repair processes and enhancing self-healing effectiveness. This article reviews key findings from previous research on shape memory-assisted self-healing (SMASH) materials and addresses the challenges and opportunities for future investigation.

Self-Healing Flexible Sensor Based on Epoxidized Natural Rubber with the Synergistic Effect of Coordination and Hydrogen Bonds

The use of highly tensile and self-healing conductive composites has gained considerable interest due to their wide range of applications in healthcare, sensors, and robotics. Epoxidized natural rubber (ENR), known for its ability to undergo highly reversible deformation, can be utilized in strain sensors to effectively transmit a broader range of signal changes. In this study, we introduced a self-healing ENR composite specifically designed for high-strain sensors. The rubber molecular chains were enhanced with hydrogen bonds and metal coordination bonds, allowing the matrix material to autonomously repair itself through these interactions. Following a repair period of 12 h at 45 °C, the composites achieve a repair efficiency exceeding 90%. Furthermore, by incorporating conductive fillers into the matrix using multistage layering, the resulting composite has good electrical conductivity, thermal conductivity, and hydrophobicity. In addition, this composite presents good sensitivity even at large strain (strain in the range of 50-200%, GF = 7.65). In conclusion, this self-healing nanocomposite, characterized by its high strain sensitivity, holds immense potential for various strain sensor applications.

Ultrafast Self-Healing Elastomer with Closed-Loop Recyclability

The loss of function after prolonged periods of use is inevitable for all materials including plastics. Hence, self-healing capabilities are a key development to prolong the service lifetime of materials. One of such self-healing capabilities can be achieved by integrating dynamic bonds such as boronic ester linkages into polymeric materials, however the rate of self-healing in these materials is insufficient and current methods to accelerate it are limited. In this study, we report the rational design, synthesis and characterization of a fluorinated elastomer (FBE15) that utilizes enhanced interaction between polymer chains afforded by strong dipole-dipole interactions from -CF3, which showed a significant increase in binding energy to -7.71 Kcal/mol from -5.51 Kcal/mol, resulting in increased interaction between the boronic ester linkages and improving self-healing capabilities of boronic ester materials, drastically reducing the time required for stress relaxation by 900 %. The bulk elastomer is capable of ultrafast self-healing in a one-click fashion that can happen in mere seconds, which can then be stretched to 150 % of its original length. By utilising the dynamic cross-linking, FBE15 is also capable of both mechanical reprocessing into the same materials and chemical recycling into its starting materials, respectively, further allowing reconstruction of the elastomers that have comparable properties to the original ones at the end of its service lifespan.

Unprecedented Approach of Fabrication and Analysis of a Bioactive PDMS/Hydroxyapatite/Graphene Nanocomposite Scaffold with a Vascular Channel to Combat Carcinogenesis

In the present investigation, natural bone-derived hydroxyapatite (HA, 2 wt %) and/or exfoliated graphene (Gr, 0.1 wt %)-embedded polydimethylsiloxane (PDMS) elastomeric films were prepared using a vascular method. The morphology, mechanical properties, crystallinity, and chemical structure of the composite films were evaluated. The in vitro biodegradation kinetics of the films indicates their adequate physiological stability. Most of the results favored PDMS/HA/Gr as a best composite scaffold having more than 703% elongation. A simulation study of the microfluidic vascular channel of the PDMS/HA/Gr scaffold suggests that the pressure drop at the outlet became greater (from 1.19 to 0.067 Pa) unlike velocity output (from 0.071 to 0.089 m/s), suggesting a turbulence-free laminar flow. Our bioactive scaffold material, PDMS/HA/Gr, showed highest cytotoxicity toward the lung cancer and breast cancer cells through Runx3 protein-mediated cytotoxic T lymphocyte (CTL) generation. Our data and predicted mechanism also suggested that the PDMS/HA/Gr-supported peripheral blood mononuclear cells (PBMCs) not only increased the generation of CTL but also upregulated the expression of RUNX3. Since the PDMS/HA/Gr scaffold-supported Runx3 induced CTL generation caused maximum cell cytotoxicity of breast cancer (MCF-7) and lung cancer (A549) cells, PDMS/HA/Gr can be treated as an excellent potential candidate for CTL-mediated cancer therapy.

Facile Preparation of a Transparent, Self-Healing, and Recyclable Polysiloxane Elastomer Based on a Dynamic Imine and Boroxine Bond

Transparent polysiloxane elastomers with good self-healing and reprocessing abilities have attracted significant attention in the field of artificial skin and flexible displays. Herein, we propose a simple one-pot method to fabricate a room temperature self-healable polysiloxane elastomer (HPDMS) by introducing dynamic and reversible imine bonds and boroxine into polydimethylsiloxane (PDMS) networks. The presence of imine bonds and boroxine is proved by FT-IR and NMR spectra. The obtained HPDMS elastomer is highly transparent with a transmittance of up to 80%. The TGA results demonstrated that the HPDMS elastomer has good heat resistance and can be used in a wide temperature range. A lower glass transition temperature (Tg, -127.4 °C) was obtained and revealed that the elastomer is highly flexible at room temperature. Because of the reformation of dynamic reversible imine bonds and boroxine, the HPDMS elastomers exhibited excellent autonomous self-healing properties. After healing for 3 h, the self-healing efficiency of HPDMS reached 96.3% at room temperature. Moreover, the elastomers can be repeatedly reprocessed multiple times under milder conditions. This work provides a simple but effective method to prepare transparent self-healable and reprocessable polysiloxane elastomers.

Self-Healing Transparent Poly(dimethyl)siloxane with Tunable Mechanical Properties: Toward Enhanced Aging Materials for Space Applications

When exposed to the geostationary orbit, polymeric materials tend to degrade on their surface due to the appearance of cracks. Implementing the self-healing concept in polymers going to space is a new approach to enhancing the lifespan of materials that cannot be replaced once launched. In this study, the elaboration of autonomous self-healing transparent poly(dimethylsiloxane) (PDMS) materials resistant to proton particles is presented. The PDMS materials are functionalized with various compositions of urea and imine moieties, forming dynamic covalent and/or supramolecular networks. The hydrogen bonds induced by the urea ensure the formation of a supramolecular network, while the dynamic covalent imine bonds are capable of undergoing exchange reactions. Materials with a broad range of mechanical properties were obtained depending on the composition and structure of the PDMS networks. As coating applications in a spatial environment were mainly targeted, the surface properties of the polymer are essential. Thus, percentages of scratch recovery were determined by AFM. From these data, self-healing kinetics were extracted and rationalized based on the polymer structures. The obtained data were in good agreement with the relaxation times determined by rheology in stress relaxation experiments. Moreover, the accelerated aging of materials under proton irradiation, simulating a major part of the geostationary environment, revealed a strong limitation or disappearance of cracks while keeping the transparency of the PDMS. These promising results open routes to prepare new flexible autonomous polymeric materials for space applications.

Injectable, Shear-Thinning, Self-Healing, and Self-Cross-Linkable Benzaldehyde-Conjugated Chitosan Hydrogels as a Tissue Adhesive

Benzaldehyde-conjugated chitosan (CH-CBA) was synthesized by a coupling reaction between chitosan (CH) and carboxybenzaldehyde (CBA). The pH-sensitive self-cross-linking can be achieved through the Schiff base reaction. The degree of substitution (DS) of CH-CBA was controlled at 1.4-12.7% by optimizing the pH and reagent stoichiometry. The dynamic Schiff base linkages conferred strong shear-thinning and self-healing properties to the hydrogels. The viscosity of the 2 wt/v % CH-CBA hydrogel decreased from 5.3 × 107 mPa·s at a shear rate of 10-2 s-1 to 2.0 × 103 mPa·s at 102 s-1 at pH 7.4. The CH-CBA hydrogel exhibited excellent biocompatibility in vitro and in vivo. Moreover, the hydrogel adhered strongly to porcine small intestine, colon, and cecum samples, comparable to commercial fibrin glue, and exhibited effective in vivo tissue sealing in a mouse cecal ligation and puncture model, highlighting its potential as a biomaterial for application in tissue adhesives, tissue engineering scaffolds, etc.

Self-healing polymers for surface scratch regeneration

Recently, there has been a significant increase in academic and industrial interest in self-healing polymers (SHPs) due to their remarkable ability to regenerate scratched surfaces and materials of astronomical significance. Scientists have been inspired by the magical repairing mechanism of the living world. They transformed the fiction of self-healing into reality by designing engrossing polymeric materials that could self-repair mechanical abrasions repeatedly. As a result, the durability of the materials is remarkably improved. Thus, the idea of studying SHPs passively upholds economic and environmental sustainability. However, the critical areas of self-healing (including healing efficiency, healing mechanism, and thermo-mechanical property changes during healing) are under continuous scientific improvisation. This review highlights recent notable advances of SHPs for application in regenerating scratched surfaces with various distinctive underlying mechanisms. The primary focus of the work is aimed at discussing the impact of SHPs on scratch-healing technology. Beyond that, insights regarding scratch testing, methods of investigating polymer surfaces, wound depths, the addition of healing fillers, and the environmental conditions maintained during the healing process are reviewed thoroughly. Finally, broader future perspectives on the challenges and prospects of SHPs in healing surface scratches are discussed.

Fabrication of Highly Thermally Resistant and Self-Healing Polysiloxane Elastomers by Constructing Covalent and Reversible Networks

The fabrication of self-healing elastomers with high thermal stability for use in extreme thermal conditions such as aerospace remains a major challenge. A strategy for preparing self-healing elastomers with stable covalent bonds and dynamic metal-ligand coordination interactions as crosslinking sites in polydimethylsiloxane (PDMS) is proposed. The added Fe (III) not only serves as the dynamic crosslinking point at room temperature which is crucial for self-healing performance, but also plays a role as free radical scavenging agent at high temperatures. The results show that the PDMS elastomers possessed an initial thermal degradation temperature over 380 °C and a room temperature self-healing efficiency as high as 65.7%. Moreover, the char residue at 800 °C of PDMS elastomer reaches 7.19% in nitrogen atmosphere, and up to 14.02% in air atmosphere by doping a small amount (i.e., 0.3 wt%) of Fe (III), which is remarkable for the self-healing elastomers that contain weak and dynamic bonds with relatively poor thermal stability. This study provides an insight into designing self-healing PDMS-based materials that can be targeted for use as high-temperature thermal protection coatings.

Self-Healable and Reprocessable Silicon Elastomers Based on Imine-Boroxine Bonds for Flexible Strain Sensor

Silicon elastomers with excellent self-healing and reprocessing abilities are highly desirable for the advancement of next-generation energy, electronic, and robotic applications. In this study, a dual cross-linked self-healing polysiloxane elastomer was facilely fabricated by introducing an exchangeable imine bond and boroxine into polydimethylsiloxane (PDMS) networks. The PDMS elastomers exhibited excellent self-healing properties due to the synergistic effect of dynamic reversible imine bonds and boroxine. After healing for 2 h, the mechanical strength of the damaged elastomers completely and rapidly recovered at room temperature. Furthermore, the prepared PDMS elastomers could be repeatedly reprocessed multiple times under milder conditions without significant degradation in mechanical performance. In addition, a stretchable and self-healable electrical sensor was developed by integrating carbon nanotubes (CNTs) with the PDMS elastomer, which can be employed to monitor multifarious human motions in real time. Therefore, this work provides a new inspiration for preparing self-healable and reprocessable silicone elastomers for future flexible electronics.

Preparation of Epoxy Resin with Disulfide-Containing Curing Agent and Its Application in Self-Healing Coating

Intrinsic self-healing polymers via dynamic covalent bonds have been attracting extensive attention because of their repeatable self-healing property. Herein, a novel self-healing epoxy resin was synthesized with disulfide-containing curing agent via the condensation of dimethyl 3,3'-dithiodipropionate (DTPA) and polyether amine (PEA). Therefore, in the structure of cured resin, flexible molecular chains and disulfide bonds were imported into the cross-linked polymer networks for triggering self-healing performance. The self-healing reaction of cracked samples was realized under a mild condition (60 °C for 6 h). The distribution of flexible polymer segments, disulfide bonds and hydrogen bonds in cross-linked networks plays a great role in the self-healing process of prepared resins. The molar ratio of PEA and DTPA strongly affects the mechanical performance and self-healing property. Especially when that molar ratio of PEA to DTPA is 2, the cured self-healing resin sample showed great ultimate elongation (795%) and excellent healing efficiency (98%). The products can be used as an organic coating, in which the crack could self-repair during a limited time. The corrosion resistance of a typical cure coating sample has been testified by an immersion experiment and electrochemistry impedance spectrum (EIS). This work provided a simple and low-cost route to prepare a self-healing coating for prolonging the service life of conventional epoxy coatings.

Epoxy-Based Catalyst-Free Self-Healing Elastomers at Room Temperature Employing Aromatic Disulfide and Hydrogen Bonds

In this paper, catalyst-free room-temperature healing epoxy vitrimer-like materials (S-vitrimer) are introduced. The S-vitrimer can be healed at room temperature without any external stimuli such as solvent, pressure, heat, and catalyst through an aromatic disulfide exchange reaction and a hydrogen bond because the glass transition temperature of the S-vitrimer is lower than room temperature. Self-healing materials are attracting widespread attention nowadays with their potential to increase the durability of the materials. However, there is still elevating need for research, considering the limitations of various self-healing methods. To the best of our knowledge, epoxy-based catalyst-free room-temperature healing materials have not been investigated until now, yet they are promising to make self-healing easier. Moreover, the S-vitrimer showed higher healing efficiency when healed for a longer time and at a higher temperature. Especially when healed at room temperature for 96 h, the S-vitrimer presented an 80% healing efficiency. The S-vitrimer also showed an 80% healing efficiency when healed at 60 °C for 48 h. To investigate the factors affecting self-healing behavior, three control experiments were carried out. Control experiments showed that the S-vitrimer is healed mainly due to a disulfide exchange reaction, but hydrogen bonds also contribute to self-healing behavior. Also, it was found that tightly packed segments can hinder self-healing through control experiments.

Self-healing solid polymer electrolyte based on imine bonds for high safety and stable lithium metal batteries

Due to their low flammability, good dimensional stability and chemical stability, solid polymer electrolytes are currently attracting extensive interest for building lithium metal batteries. But severe safety issues such as cracks or breakage, resulting in short circuits will prevent their widespread application. Here, we report a new design of self-healing solid polymer electrolyte (ShSPE) based on imine bonds, fabricated from varying amounts of polyoxyethylenebis(amine) and terephthalaldehyde through a simple Schiff base reaction. Moreover, adding diglycidyl ether of bisphenol A improves the flexibility and high stretchability of the polymer electrolyte. The polymer networks exhibit good thermal stability and excellent self-healing characteristics. The ShSPE with the highest NH2-PEG-NH2 content (ShSPE-3) has an improved lithium ion transference number of 0.39, and exhibits an electrochemical stability up to 4.5 V vs. Li/Li+. ShSPE-3 shows the highest ionic conductivity of 1.67 × 10-4 S cm-1 at 60 °C. Besides, the interfacial stability of ShSPE-3 is promoted and the electrolyte membrane exhibits good cycling performance with LiFePO4, and the LiFePO4/Li cell exhibits an initial discharge capacity of 141.3 mA h g -1. These results suggest that self-healing solid polymer electrolytes are promising candidates for high safety and stable lithium metal batteries.

Multi-stimuli-responsive hydrogels and their medical applications

This review highlights the medical applications of multi-stimuli-responsive hydrogels as self-healing hydrogels, antibacterial materials and drug-delivery systems.

Basic Approaches to the Design of Intrinsic Self-Healing Polymers for Triboelectric Nanogenerators

Triboelectric nanogenerators (TENGs) as a revolutionary system for harvesting mechanical energy have demonstrated high vitality and great advantage, which open up great prospects for their application in various areas of the society of the future. The past few years have seen exponential growth in many new classes of self-healing polymers (SHPs) for TENGs. This review presents and evaluates the SHP range for TENGs, and also attempts to assess the impact of modern polymer chemistry on the development of advanced materials for TENGs. Among the most widely used SHPs for TENGs, the analysis of non-covalent (hydrogen bond, metal-ligand bond), covalent (imine bond, disulfide bond, borate bond) and multiple bond-based SHPs in TENGs has been performed. Particular attention is paid to the use of SHPs with shape memory as components of TENGs. Finally, the problems and prospects for the development of SHPs for TENGs are outlined.

Assembling of Reprocessable Polybutadiene-Based Vitrimers with High Strength and Shape Memory via Catalyst-Free Imine-Coordinated Boroxine

Vitrimers endow cross-linked polymers with malleability and reprocessability via exchange reactions. However, designing of reprocessable, shape-memory polymer materials with high strength via a catalyst-free method remains a challenge under mild conditions. Here, we propose a facile strategy to address this dilemma by introducing the exchangeable imine bond and N-coordinated boroxine into a polybutadiene (PB)-based network. Specifically, PB grafted with 2-aminoethanethiol is reacted with the formyl group of phenylboronic acid and dehydrated to form a dual-dynamic covalently cross-linked network at room temperature. The dynamic network draws on the advantage of imine (toughness) and N-coordinated boroxine (strength), making the PB-based materials exhibit favorable malleability, mechanical property, reprocessability, and thermal-induced shape-memory behavior. We can obtain customized high mechanical properties by tuning the cross-linking density, and the tensile strength reaches a high value (12.35 MPa) without fillers or any other additives. Meanwhile, the unique network framework makes the material recycle over several times without sacrificing its property. This work presents a facile and effective approach to achieve a multifunctional polymer with customized attributes. Besides, this strategy can recycle end-of-life rubber to alleviate environmental pollution and provide inspiration for fabricating targeted materials by uniting the dynamic covalent or noncovalent bonds.