Pharmaceutical significance of Eudragit: A review

Design and evaluation of oseltamivir phosphate dual-phase extended-release tablets for the treatment of influenza

In this study, once-daily extended-release tablets with dual-phase release of oseltamivir phosphate were developed for the treatment of influenza. The goal was to improve patient adherence and offer more therapeutic choices. The tablets were manufactured using wet granulation, bilayer tablet compression, and enteric membrane-controlled coating processes. Various polymers, such as hydroxypropyl methylcellulose (HPMC K100MCR, K15MCR, K4MCR, K100LV), enteric polymers (HPMC AS-LF, Eudragit L100-55) and membrane-controlled polymers (OPADRY® CA), were used either individually or in combination with other common excipients. The formulations include enteric-coated extended-release tablet (F1), hydrophilic matrix extended-release tablet (F2), semipermeable membrane-controlled release tablet (F3) and a combination extended-release tablet containing both enteric and hydrophilic matrix (F4). The in vitro drug release profile of each formulation was fitted to the first-order model, and the Ritger-Peppas model suggested that Fickian diffusion was the primary mechanism for drug release. Comparative bioequivalence studies with Tamiflu® (oseltamivir phosphate) capsules revealed that formulations F1, F2, and F3 did not achieve bioequivalence. However, under fed conditions, formulation F4 achieved bioequivalence with a relative bioavailability of 95.30% (90% CI, 88.83%-102.15%). This suggests that the formulation F4 tablet could potentially be a new treatment option for patients with influenza.

Antimicrobial Composites Based on Methacrylic Acid-Methyl Methacrylate Electrospun Fibers Stabilized with Copper(II)

This study presents fibers based on methacrylic acid-methyl methacrylate (Eudragit L100) as Cu(II) adsorbents, resulting in antimicrobial complexes. Eudragit L100, an anionic copolymer synthesized by radical polymerization, was electrospun in dimethylformamide (DMF) and ethanol (EtOH). The electrospinning process was optimized through a 22-factorial design, with independent variables (copolymer concentration and EtOH/DMF volume ratio) and three repetitions at the central point. The smallest average fiber diameter (259 ± 53 nm) was obtained at 14% w/v Eudragit L100 and 80/20 EtOH/DMF volume ratio. The fibers were characterized using scanning electron microscopy (SEM), infrared spectroscopy in attenuated total reflectance mode (FTIR-ATR), and differential scanning calorimetry (DSC). The pseudo-second-order mechanism explained the kinetic adsorption toward Cu(II). The fibers exhibited a maximum adsorption capacity (qe) of 43.70 mg/g. The DSC analysis confirmed the Cu(II) absorption, indicating complexation between metallic ions and copolymer networks. The complexed fibers showed a lower degree of swelling than the non-complexed fibers. The complexed fibers exhibited bacteriostatic activity against Gram-negative (Pseudomonas aeruginosa) and Gram-positive (Staphylococcus aureus) bacteria. This study successfully optimized the electrospinning process to produce thin fibers based on Eudragit L100 for potential applications as adsorbents for Cu(II) ions in aqueous media and for controlling bacterial growth.

Simultaneous Delivery of Curcumin and Resveratrol via In Situ Gelling, Raft-Forming, Gastroretentive Formulations

Curcumin and resveratrol are polyphenolic compounds that have been shown to exhibit synergistic therapeutic properties including anti-inflammatory, anticancer, and antiulcer activities, which may be exploited for the treatment of gastric diseases. However, both compounds have poor aqueous solubility and rapid metabolism, resulting in a low oral bioavailability. In situ gelling, liquid formulations were developed to produce a gastroretentive, raft-forming delivery vehicle to improve bioavailability. Solid dispersions containing a mixture of curcumin and resveratrol with Eudragit® EPO (Cur/Res-SD) were first prepared using solvent evaporation, to improve the solubility and dissolution of the compounds. Solid dispersions of a weight ratio of 1:10 curcumin/resveratrol to Eudragit® EPO were subsequently incorporated into in situ gelling, liquid formulations based on the gelling polymers, sodium alginate (low viscosity and medium viscosity), pectin, and gellan gum, respectively. Calcium carbonate and sodium bicarbonate were included to produce carbon dioxide bubbles in the gel matrix, on exposure to gastric fluid, and to achieve flotation. Moreover, the calcium ions acted as a crosslinking agent for the hydrogels. Optimized formulations floated rapidly (<60 s) in simulated gastric fluid (pH = 1.2) and remained buoyant, resulting in the gradual release of more than 80% of the curcumin and resveratrol content within 8 h. The optimized formulation based on medium-viscosity sodium alginate exhibited enhanced cytotoxic activity toward human gastric adenocarcinoma cell lines (AGS), compared with unformulated curcumin and resveratrol compounds, and increased anti-inflammatory activity against RAW 264.7 macrophage cells compared with the NSAID, indomethacin. These findings demonstrate that in situ gelling, liquid formulations, loaded with a combination of curcumin and resveratrol in the form of solid dispersions, show potential as gastroretentive delivery systems for local and systemic effects.

TMPyP-mediated photoinactivation of Pseudomonas aeruginosa improved in the presence of a cationic polymer

Pseudomonas aeruginosa is one of the most refractory organisms to antibiotic treatment and appears to be one of the least susceptible to photodynamic treatment. TMPyP is effective in the photoinactivation of P. aeruginosa, and the co-administration with the cationic polymer Eudragit®-E100 (Eu) potentiates this effect against isolates both sensitive and resistant to antibiotics. The fluorescent population (>98%) observed by flow cytometry after exposure to Eu + TMPyP remained unchanged after successive washings, indicating a stronger interaction/internalization of TMPyP in the bacteria, which could be attributed to the rapid neutralization of surface charges. TMPyP and Eu produced depolarization of the cytoplasmic membrane, which increased when both cationic compounds were combined. Using confocal laser scanning microscopy, heterogeneously distributed fluorescent areas were observed after TMPyP exposure, while homogeneous fluorescence and enhanced intensity were observed with Eu + TMPyP. The polymer caused alterations in the bacterial envelopes that contributed to a deeper and more homogeneous interaction/internalization of TMPyP, leading to a higher probability of damage by cytotoxic ROS and explaining the enhanced result of photodynamic inactivation. Therefore, Eu acts as an adjuvant without being by itself capable of eradicating this pathogen. Moreover, compared with other therapies, this combinatorial strategy with a polymer approved for pharmaceutical applications presents advantages in terms of toxicity risks.

Formulation and optimization of pH-sensitive nanocrystals for improved oral delivery

The challenge of low water solubility in pharmaceutical science profoundly impacts drug absorption and therapeutic effectiveness. Nanocrystals (NC), consisting of drug molecules and stabilizing agents, offer a promising solution to enhance solubility and control release rates. In the pharmaceutical industry, top-down techniques are favored for their flexibility and cost-effectiveness. However, increased solubility can lead to premature drug dissolution in the stomach, which is problematic due to the acidic pH or enzymes. Researchers are exploring encapsulating agents that facilitate drug release at customized pH levels as a valuable strategy to address this. This study employed wet milling and spray drying techniques to create encapsulated NC for delivering the drug to the intestinal tract using the model drug ivermectin (IVM). Nanosuspensions (NS) were efficiently produced within 2 h using NanoDisp®, with a particle size of 198.4 ± 0.6 nm and a low polydispersity index (PDI) of 0.184, ensuring uniformity. Stability tests over 100 days at 4 °C and 25 °C demonstrated practical viability, with no precipitation or significant changes observed. Cytotoxicity evaluations indicated less harm to Caco-2 cells compared to the pure drug. Furthermore, the solubility of the NC increased by 47-fold in water and 4.8-fold in simulated intestinal fluid compared to the pure active compound. Finally, dissolution tests showed less than 10% release in acidic conditions and significant improvement in simulated intestinal conditions, promising enhanced drug solubility and bioavailability. This addresses a long-standing pharmaceutical challenge in a cost-effective and scalable manner.

Development of Ac2-26 Mesoporous Microparticle System as a Potential Therapeutic Agent for Inflammatory Bowel Diseases

Introduction

Inflammatory bowel diseases (IBDs) disrupt the intestinal epithelium, leading to severe chronic inflammation. Current therapies cause adverse effects and are expensive, invasive, and ineffective for most patients. Annexin A1 (AnxA1) is a pivotal endogenous anti-inflammatory and tissue repair protein in IBD. Nanostructured compounds loading AnxA1 or its active N-terminal mimetic peptides improve IBD symptomatology.

Methods

To further explore their potential as a therapeutic candidate, the AnxA1 N-terminal mimetic peptide Ac2-26 was incorporated into SBA-15 ordered mesoporous silica and covered with EL30D-55 to deliver it by oral treatment into the inflamed gut.

Results

The systems SBA-Ac2-26 developed measurements revealed self-assembled rod-shaped particles, likely on the external surface of SBA-15, and 88% of peptide incorporation. SBA-15 carried the peptide Ac2-26 into cultured Raw 264.7 macrophages and Caco-2 epithelial cells. Moreover, oral administration of Eudragit-SBA-15-Ac2-26 (200 μg; once a day; for 4 days) reduced colitis clinical symptoms, inflammation, and improved epithelium recovery in mice under dextran-sodium sulfate-induced colitis.

Discussion

The absorption of SBA-15 in gut epithelial cells is typically low; however, the permeable inflamed barrier can enable microparticles to cross, being phagocyted by macrophages. These findings suggest that Ac2-26 is successfully delivered and binds to its receptors in both epithelial and immune cells, aligning with the clinical results.

Conclusion

Our findings demonstrate a simple and cost-effective approach to delivering Ac2-26 orally into the inflamed gut, highlighting its potential as non-invasive IBD therapy.

Nanonization and Deformable Behavior of Fattigated Peptide Drug in Mucoadhesive Buccal Films

This study was tasked with the design of mucoadhesive buccal films (MBFs) containing a peptide drug, leuprolide (LEU), or its diverse nanoparticles (NPs), for enhanced membrane permeability via self-assembled nanonization and deformable behavior. An LEU-oleic acid conjugate (LOC) and its self-assembled NPs (LON) were developed. Additionally, a deformable variant of LON (d-LON) was originally developed by incorporating l-α-phosphatidylcholine into LON as an edge activator. The physicochemical properties of LON and d-LON, encompassing particle size, zeta potential, and deformability index (DI), were evaluated. MBFs containing LEU, LOC, and NPs (LON, d-LON) were prepared using the solvent casting method by varying the ratio of Eudragit RLPO and hydroxypropyl methylcellulose, with propylene glycol used as a plasticizer. The optimization of MBF formulations was based on their physicochemical properties, including in vitro residence time, dissolution, and permeability. The dissolution results demonstrated that the conjugation of oleic acid to LEU exhibited a more sustained LEU release pattern by cleaving the ester bond of the conjugate, as compared to the native LEU, with reduced variability. Moreover, the LOC and its self-assembled NPs (LON, d-LON), equivalent to 1 mg LEU doses in MBF, exhibited an amorphous state and demonstrated better permeability through the nanonization process than LEU alone, regardless of membrane types. The incorporation of lauroyl-L-carnitine into the films as a permeation enhancer synergistically augmented drug permeability. Most importantly, the d-LON-loaded buccal films showed the highest permeability, due to the deformability of NPs. Overall, MBF-containing peptide NPs and permeation enhancers have the potential to replace parenteral LEU administration by improving LEU druggability and patient compliance.

Study of PEG-b-PLA/Eudragit S100 Blends on the Nanoencapsulation of Indigo Carmine Dye and Application in Controlled Release

A nanocapsule shell of poly(ethylene glycol)-block-poly(d,l-lactic acid) (PEG-b-PLA) mixed with anionic Eudragit S100 (90/10% w/w) was previously used to entrap and define the self-assembly of indigo carmine (IC) within the hydrophilic cavity core. In the present work, binary blends were prepared by solution mixing at different PEG-b-PLA/Eudragit S100 ratios (namely, 100/0, 90/10, 75/25, and 50/50% w/w) to elucidate the role of the capsule shell in tuning the encapsulation of the anionic dye (i.e., IC). The results showed that the higher content of Eudragit S100 in the blend decreases the miscibility of the two polymers due to weak intermolecular interactions between PEG-b-PLA and Eudragit S100. Moreover, with an increase in the amount of Eudragit S100, a higher thermal stability was observed related to the mobility restriction of PEG-b-PLA chains imposed by Eudragit S100. Formulations containing 10 and 25% Eudragit S100 exhibited an optimal interplay of properties between the negative surface charge and the miscibility of the polymer blend. Therefore, the anionic character of the encapsulating agent provides sufficient accumulation of IC molecules in the nanocapsule core, leading to dye aggregates following the self-assembly. At the same time, the blending of the two polymers tunes the IC release properties in the initial stage, achieving slow and controlled release. These findings give important insights into the rational design of polymeric nanosystems containing organic dyes for biomedical applications.

Recent advances of electrospray technique for multiparticulate preparation: Drug delivery applications

The electrospray (ES) technique has proven to be an effective and a versatile approach for crafting drug delivery carriers with diverse dimensions, multiple layers, and varying morphologies. Achieving the desired particle properties necessitates careful optimization of various experimental parameters. This review delves into the most prevalent ES system configurations employed for this purpose, such as monoaxial, coaxial, triaxial, and multi-needle setups with solid or liquid collector. In addition, this work underscores the significance of ES in drug delivery carriers and its remarkable ability to encapsulate a wide spectrum of therapeutic agents, including drugs, nucleic acids, proteins, genes and cells. Depth examination of the critical parameters governing the ES process, including the choice of polymer, surface tension, voltage settings, needle size, flow rate, collector types, and the collector distance was conducted with highlighting on their implications on particle characteristics, encompassing morphology, size distribution, and drug encapsulation efficiency. These insights illuminate ES's adaptability in customizing drug delivery systems. To conclude, this review discusses ES process optimization strategies, advantages, limitations and future directions, providing valuable guidance for researchers and practitioners navigating the dynamic landscape of modern drug delivery systems.

Clinical Evaluation of the Safety and Tolerability of Film-Forming Sprays in Patients With Psoriasis and Eczema

Background Treating dermatological pathologies under occlusion therapy is a popular adjunct, especially in thickened, lichenified areas of psoriasis where sustained contact with topical corticosteroids plays a pivotal role. Film-forming spray (FFS) can be a novel, alternate approach along with topical treatment in this area for carefully selected cases. This study aimed to evaluate the safety profile and physical characteristics of a novel formulation of an FFS in patients with psoriasis and eczema.  Methods This open-label, multicentre, comparative study included subjects diagnosed with chronic plaque psoriasis requiring topical corticosteroid therapy or those with eczema necessitating its application and occlusion therapy. The study product was applied to two groups of subjects. For patients in group 1, the FFS was applied to the skin area affected by the dermatological condition, which was covered with ointment only. In the second group, the FFS was applied to the corresponding unaffected skin area. The FFS was applied for 60-90 seconds and was observed for two hours after the application. The subjects were evaluated for primary outcomes, including safety assessment, overall physical characteristics, and appearance of FFS from local skin effects. The secondary outcomes included physical appearance characteristics and overall patient satisfaction following the application of FFS at the target sites. Further statistical assessments were conducted using the SAS software version 9.4 (2023; SAS Institute Inc., Cary, North Carolina, United States). Result A total of 100 subjects were included in the study across 10 outpatient centers, of which 79% had psoriatic plaques and 21% had eczematous lesions. Primary outcomes showed a lack of appearance of clinical symptoms such as dryness, flakiness, or irritation. A total of 10% of subjects in group 1 had erythema, and 6% had a tingling sensation, which was transient and mild. The secondary outcomes showed that only 12% of subjects in Group 1 and 6% of subjects in Group 2 showed a feeling of stickiness at the application site. In group 1, 8% reported a cooling sensation, which disappeared in one and two minutes, and none experienced a cooling sensation in Group 2. The average drying time for FFS in subjects with dermatological conditions was 5.19 minutes compared to 1.51 minutes on unaffected skin. The film washability results indicated that 96% of subjects in group 1 reported complete removal in less than two minutes. At the end of the study period, the mean satisfaction score was 8.99. No significant adverse events were reported in the patients. Conclusion This study highlights the potential application of a novel formulation of FFS as a safe and well-tolerated option for enhancing uniform skin coverage with the topical corticosteroid in patients affected with psoriasis and eczema.

Formulation of Budesonide-Loaded Polymeric Nanoparticles into Hydrogels for Local Therapy of Atopic Dermatitis

Budesonide is a mineral corticoid applied in the local therapy of pediatric atopic dermatitis. Unfortunately, its dermal administration is hindered by the concomitant adverse effects and its physicochemical properties. The characteristic pH change in the atopic lesions can be utilized for the preparation of a pH-sensitive nanocarrier. In this view, the formulation of Eudragit L 100 nanoparticles as a budesonide delivery platform could provide more efficient release to the desired site, improve its penetration, and subsequently lower the undesired effects. In this study, budesonide-loaded Eudragit L100 nanoparticles were prepared via the nanoprecipitation method (mean diameter 57 nm, -31.2 mV, and approx. 90% encapsulation efficiency). Their safety was proven by cytotoxicity assays on the HaCaT keratinocyte cell line. Further, the drug-loaded nanoparticles were incorporated into two types of hydrogels based on methylcellulose or Pluronic F127. The formulated hydrogels were characterized with respect to their pH, occlusion, rheology, penetration, spreadability, and drug release. In conclusion, the developed hydrogels containing budesonide-loaded nanoparticles showed promising potential for the pediatric treatment of atopic dermatitis.

pH-Sensitive Acrylic Terpolymers for the Coating of Orally Administered Drugs Used for Colonic Release

Polymeric coatings are a promising option for the development of delivery systems for orally administered drugs. However, the gastrointestinal conditions to which they are subjected, which include low pH and solubility as well as peristaltic movements, can limit their applications. In this work, different formulations of polymeric coatings were produced using pH-sensitive materials consisting of copolymers of methyl acrylate, methyl methacrylate, and methacrylic acid. The polymers were synthesized by the emulsion polymerization technique, obtaining small average particle sizes (56-190 nm), molecular weights between 200,000 and 400,000 g/mol, and a glass transition temperature above 35 °C, which are suitable for film formation at room temperature. Thus, they were assessed as coatings for hydroxypropyl methylcellulose capsules (HPMC) using the immersion method, showing adequate capacity to protect the capsule at gastric pH (pH 1.2) and dissolve at the simulated intestinal pH (pH= 7.2). In particular, the higher the content of the acidic monomer, the higher the release time of the test molecule contained in the acrylic terpolymer-coated HPMC capsules proposed, which was a curcuminoid derivative due to their bright color and potential medical benefits. In addition, a minimum number of immersions was required for coating the HPMC capsules at high acidic concentrations, which further facilitates the delayed release needed for colonic treatment. However, too high proportions of methacrylic acid may result in cytotoxicity issues. Consequently, a biocompatible formulation containing a proportion of methyl acrylate, methyl methacrylate, and methacrylic acid of 7:3:3 is proposed as the most adequate for colonic release. Thus, by chemically modulating the molar percentages of the acrylic monomers, it was possible to obtain tailored acrylic terpolymer coatings with different characteristics and desired properties in order to modulate the release kinetics of an active substance in a colonic environment.

Liquisolid Technique: A Novel Technique with Remarkable Applications in Pharmaceutics

Recently, it has been observed that newly developed drugs are lipophilic and have low aqueous solubility issues, which results in a lower dissolution rate and bioavailability of the drugs. To overcome these issues, the liquisolid technique, an innovative and advanced approach, comes into play. This technique involves the conversion of the drug into liquid form by dissolving it in non-volatile solvent and then converting the liquid medication into dry, free-flowing, and compressible form by the addition of carrier and coating material. It offers advantages like low cost of production, easy method of preparation, and compactable with thermo labile and hygroscopic drugs. It has been widely applied for BCS II drugs to enhance dissolution profile. Improving bioavailability, providing sustained release, minimizing pH influence on drug dissolution, and improving drug photostability are some of the other promising applications of this technology. This review article presents an overview of the liquisolid technique and its applications in formulation development.

The Exploitation of pH-Responsive Eudragit-Coated Mesoporous Silica Nanostructures in the Repurposing of Terbinafine Hydrochloride for Targeted Colon Cancer Inhibition: Design Optimization, In Vitro Characterization, and Cytotoxicity Assessment

Targeted drug delivery is achieving great success in cancer therapy due to its potential to deliver drugs directly to the action site. Terbinafine hydrochloride (TER) is a broad-spectrum anti-fungal drug that has been found to have some potential anti-tumor effects in the treatment of colon cancer. We aimed here to design and develop pH-sensitive Eudragit (Eud)-coated mesoporous silica nanostructures (MSNs) to control drug release in response to changes in pH. The diffusion-supported loading (DiSupLo) technique was applied for loading TER into the MSNs. The formulation was optimized by a D-optimal design, which permits the concurrent assessment of the influence of drug/MSN%, coat concentration, and MSN type on the drug entrapment efficiency (EE) and its release performance. The optimal formula displayed a high EE of 96.49%, minimizing the release in pH 1.2 to 16.15% and maximizing the release in pH 7.4 to 78.09%. The cytotoxicity of the optimal formula on the colon cancer cells HT-29 was higher than it was with TER alone by 2.8-fold. Apoptosis in cancer cells exposed to the optimum formula was boosted as compared to what it was with the plain TER by 1.2-fold and it was more efficient in arresting cells during the G0/G1 and S stages of the cell cycle. Accordingly, the repurposing of TER utilizing Eud/MSNs is a promising technique for targeted colon cancer therapy.

Polymer-Based Nanoparticles as Drug Delivery Systems for Purines of Established Importance in Medicine

Many purine derivatives are active pharmaceutical ingredients of significant importance in the therapy of autoimmune diseases, cancers, and viral infections. In many cases, their medical use is limited due to unfavorable physicochemical and pharmacokinetic properties. These problems can be overcome by the preparation of the prodrugs of purines or by combining these compounds with nanoparticles. Herein, we aim to review the scientific progress and perspectives for polymer-based nanoparticles as drug delivery systems for purines. Polymeric nanoparticles turned out to have the potential to augment antiviral and antiproliferative effects of purine derivatives by specific binding to receptors (ASGR1-liver, macrophage mannose receptor), increase in drug retention (in eye, intestines, and vagina), and permeation (intranasal to brain delivery, PEPT1 transport of acyclovir). The most significant achievements of polymer-based nanoparticles as drug delivery systems for purines were found for tenofovir disoproxil in protection against HIV, for acyclovir against HSV, for 6-mercaptopurine in prolongation of mice ALL model life, as well as for 6-thioguanine for increased efficacy of adoptively transferred T cells. Moreover, nanocarriers were able to diminish the toxic effects of acyclovir, didanosine, cladribine, tenofovir, 6-mercaptopurine, and 6-thioguanine.

Encapsulation of Iron-Saturated Lactoferrin for Proteolysis Protection with Preserving Iron Coordination and Sustained Release

Lactoferrin (Lf) is a globular glycoprotein found mainly in milk. It has a very high affinity for iron(III) ions, and its fully saturated form is called holoLf. The antimicrobial, antiviral, anticancer, and immunomodulatory properties of Lf have been studied extensively for the past two decades. However, to demonstrate therapeutic benefits, Lf has to be efficiently delivered to the intestinal tract in its structurally intact form. This work aimed to optimize the encapsulation of holoLf in a system based on the versatile Eudragit® RS polymer to protect Lf against the proteolytic environment of the stomach. Microparticles (MPs) with entrapped holoLf were obtained with satisfactory entrapment efficiency (90-95%), high loading capacity (9.7%), and suitable morphology (spherical without cracks or pores). Detailed studies of the Lf release from the MPs under conditions that included simulated gastric or intestinal fluids, prepared according to the 10th edition of the European Pharmacopeia, showed that MPs partially protected holoLf against enzymatic digestion and ionic iron release. The preincubation of MPs loaded with holoLf under conditions simulating the stomach environment resulted in the release of 40% of Lf from the MPs. The protein released was saturated with iron ions at 33%, was structurally intact, and its iron scavenging properties were preserved.

Amorphous Solid Dispersion as Drug Delivery Vehicles in Cancer

Cancer treatment has improved over the past decades, but a major challenge lies in drug formulation, specifically for oral administration. Most anticancer drugs have poor water solubility which can affect their bioavailability. This causes suboptimal pharmacokinetic performance, resulting in limited efficacy and safety when administered orally. As a result, it is essential to develop a strategy to modify the solubility of anticancer drugs in oral formulations to improve their efficacy and safety. A promising approach that can be implemented is amorphous solid dispersion (ASD) which can enhance the aqueous solubility and bioavailability of poorly water-soluble drugs. The addition of a polymer can cause stability in the formulations and maintain a high supersaturation in bulk medium. Therefore, this study aimed to summarize and elucidate the mechanisms and impact of an amorphous solid dispersion system on cancer therapy. To gather relevant information, a comprehensive search was conducted using keywords such as "anticancer drug" and "amorphous solid dispersion" in the PubMed, Scopus, and Google Scholar databases. The review provides an overview and discussion of the issues related to the ASD system used to improve the bioavailability of anticancer drugs based on molecular pharmaceutics. A thorough understanding of anticancer drugs in this system at a molecular level is imperative for the rational design of the products.

A facile one-stone-two-birds strategy for fabricating multifunctional 3D nanofibrous scaffolds

Local bacterial infections lead to delayed wound healing and in extreme cases, such as diabetic foot ulcers, to non-healing due to the impaired cellular function in such wounds. Thus, many scientists have focused on developing advanced therapeutic platforms to treat infections and promote cellular proliferation and angiogenesis. This study presents a facile approach for designing nanofibrous scaffolds in three dimensions (3D) with enhanced antibacterial activity to meet the need of treating chronic diabetic wounds. Being a cationic surfactant as well as an antimicrobial agent, octenidine (OCT) makes a 2D membrane hydrophilic, enabling it to be modified into a 3D scaffold in a "one stone, two birds" manner. Aqueous sodium borohydride (NaBH4) solution plays a dual role in the fabrication process, functioning as both a reducing agent for the in situ synthesis of silver nanoparticles (Ag NPs) anchored on the nanofiber surface and a hydrogen gas producer for expanding the 2D membranes into fully formed 3D nanofiber scaffolds, as demonstrated by morphological analyses. Various techniques were used to characterize the developed scaffold (e.g., SEM, XRD, DSC, FTIR, and surface wettability), demonstrating a multilayered porous structure and superhydrophilic properties besides showing sustained and prolonged release of OCT (61% ± 1.97 in 144 h). Thanks to the synergistic effect of OCT and Ag NPs, the antibacterial performance of the 3D scaffold was significantly higher than that of the 2D membrane. Moreover, cell viability was studied in vitro on mouse fibroblasts L929, and the noncytotoxic character of the 3D scaffold was confirmed. Overall, it is shown that the obtained multifunctional 3D scaffold is an excellent candidate for diabetic wound healing and skin repair.

Levofloxacin HCl-Loaded Eudragit L-Based Solvent Exchange-Induced In Situ Forming Gel Using Monopropylene Glycol as a Solvent for Periodontitis Treatment

Solvent exchange-induced in situ forming gel (ISG) is currently an appealing dosage form for periodontitis treatment via localized injection into the periodontal pocket. This study aims to apply Eudragit L and Eudragit S as matrix components of ISG by using monopropylene glycol as a solvent for loading levofloxacin HCl for periodontitis treatment. The influence of Eudragit concentration was investigated in terms of apparent viscosity, rheological behavior, injectability, gel-forming behavior, and mechanical properties. Eudragit L-based formulation presented less viscosity, was easier to inject, and could form more gel than Eudragit S-based ISG. Levofloxacin HCl-loading diminished the viscosity of Eudragit L-based formulation but did not significantly change the gel formation ability. Higher polymer loading increased viscosity, force-work of injectability, and hardness. SEM photographs and µCT images revealed their scaffold formation, which had a denser topographic structure and less porosity attained owing to higher polymer loading and less in vitro degradation. By tracking with fluorescence dyes, the interface interaction study revealed crucial information such as solvent movement ability and matrix formation of ISG. They prolonged the drug release for 14 days with fickian drug diffusion kinetics and increased the release amount above the MIC against test microbes. The 1% levofloxacin HCl and 15% Eudragit L dissolved in monopropylene glycol (LLM15) was a promising ISG because of its appropriate viscosity (3674.54 ± 188.03 cP) with Newtonian flow, acceptable gel formation and injectability (21.08 ± 1.38 N), hardness (33.81 ± 2.3 N) and prolonged drug release with efficient antimicrobial activities against S. aureus (ATCC 6538, 6532, and 25923), methicillin-resistant S. aureus (MRSA) (S. aureus ATCC 4430), E. coli ATCC 8739, C. albicans ATCC 10231, P. gingivalis ATCC 33277, and A. actinomycetemcomitans ATCC 29522; thus, it is the potential ISG formulation for periodontitis treatment by localized periodontal pocket injection.

Comparison of 5-ASA layered or matrix pellets coated with a combination of ethylcellulose and Eudragits L and S in the treatment of ulcerative colitis in rats

The aim of this study was to evaluate and optimize the combination of time and pH-dependent polymers as a single coating for the design of the colon-specific drug delivery system of 5-aminosalicylic acid (5-ASA) pellets. 5-ASA matrix pellets with a 70% drug load were prepared by the extrusion-spheronization method. The optimal coating formula which included Eudragit S (ES)+Eudragit L (EL)+Ethylcellulose (EC) was predicted for the targeted drug delivery to the colonic area by a 3² factorial design. The ratio of ES:EL:EC and coating level were considered as independent variables while the responses were the release of less than 10% of the drug within 2 h (Y₁), the release of 60-70% within 10 h at pH 6.8 (Y₂) and lag time of less than 1 h at pH 7.2 (Y₃). Also, 5-ASA layered pellets were prepared by the powder layering of 5-ASA on nonpareils (0.4-0.6 mm) in a fluidized bed coater and then coated with the same optimum coating composition. The coated 5-ASA layered or matrix pellets were tested in a rat model of ulcerative colitis (UC) and compared with the commercial form of 5-ASA pellets (Pentasa®). The ratio of ES:EL:EC of 33:52:15 w/w at a coating level of 7% was discovered as the optimum coating for the delivery of 5-ASA matrix pellets to the colon. The coated 5-ASA pellets were spherical with uniform coating as shown by SEM and met all of our release criteria as predicted. In-vivo studies demonstrated that the optimum 5-ASA layered or matrix pellets had superior anti-inflammatory activities than Pentasa® in terms of colitis activity index (CAI), colon damage score (CDS), colon/body weight ratio and colon's tissue enzymes of glutathione (GSH) and malondialdehyde (MDA). The optimum coating formulation showed a high potential for colonic delivery of 5-ASA layered or matrix pellets and triggered drug release based on pH and time.

Structural Modifications of Polyethylenimine to Control Drug Loading and Release Characteristics of Amorphous Solid Dispersions

Crystalline drugs with low solubility have the potential to benefit from delivery in the amorphous form. The polymers used in amorphous solid dispersions (ASDs) influence their maximum drug loading, solubility, dissolution rate, and physical stability. Herein, the influence of hydrophobicity of crosslinked polyethylenimine (PEI) is investigated for the delivery of the BCS class II nonsteroidal anti-inflammatory drug flufenamic acid (ffa). Several synthetic variables for crosslinking PEI with terephthaloyl chloride were manipulated: solvent, crosslinking density, reactant concentration, solution viscosity, reaction temperature, and molecular weight of the hyperbranched polymer. Benzoyl chloride was employed to cap amine groups to increase the hydrophobicity of the crosslinked materials. Amorphous deprotonated ffa was present in all ASDs; however, the increased hydrophobicity and reduced basicity from benzoyl functionalization led to a combination of amorphous deprotonated ffa and amorphous neutral ffa in the materials at high drug loadings (50 and 60 wt %). All ASDs demonstrated enhanced drug delivery in acidic media compared to crystalline ffa. Physical stability testing showed no evidence of crystallization after 29 weeks under various relative humidity conditions. These findings motivate the broadening of polymer classes employed in ASD formation to include polymers with very high functional group concentrations to enable loadings not readily achieved with existing polymers.

An Imidazolium-Based Ionic Liquid as a Model to Study Plasticization Effects on Cationic Polymethacrylate Films

Ionic liquids (ILs) have been touted as effective and environmentally friendly agents, which has driven their application in the biomedical field. The study compares the effectiveness of an IL agent, 1-hexyl-3-methyl imidazolium chloride ([HMIM]Cl), to current industry standards for plasticizing a methacrylate polymer. Industrial standards glycerol, dioctyl phthalate (DOP) and the combination of [HMIM]Cl with a standard plasticizer was also evaluated. Plasticized samples were evaluated for stress-strain, long-term degradation, thermophysical characterizations, and molecular vibrational changes within the structure, and molecular mechanics simulations were performed. Physico-mechanical studies showed that [HMIM]Cl was a comparatively good plasticizer than current standards reaching effectiveness at 20-30% w/w, whereas plasticizing of standards such as glycerol was still inferior to [HMIM]Cl even at concentrations up to 50% w/w. Degradation studies show HMIM-polymer combinations remained plasticized for longer than other test samples, >14 days, compared to glycerol <5 days, while remaining more pliable. The combination of [HMIM]Cl-DOP was effective at concentrations >30% w/w, demonstrating remarkable plasticizing capability and long-term stability. ILs used as singular agents or in tandem with other standards provided equivalent or better plasticizing activity than the comparative free standards.

Insights into the Safety and Versatility of 4D Printed Intravesical Drug Delivery Systems

This paper focuses on recent advancements in the development of 4D printed drug delivery systems (DDSs) for the intravesical administration of drugs. By coupling the effectiveness of local treatments with major compliance and long-lasting performance, they would represent a promising innovation for the current treatment of bladder pathologies. Being based on a shape-memory pharmaceutical-grade polyvinyl alcohol (PVA), these DDSs are manufactured in a bulky shape, can be programmed to take on a collapsed one suitable for insertion into a catheter and re-expand inside the target organ, following exposure to biological fluids at body temperature, while releasing their content. The biocompatibility of prototypes made of PVAs of different molecular weight, either uncoated or coated with Eudragit®-based formulations, was assessed by excluding relevant in vitro toxicity and inflammatory response using bladder cancer and human monocytic cell lines. Moreover, the feasibility of a novel configuration was preliminarily investigated, targeting the development of prototypes provided with inner reservoirs to be filled with different drug-containing formulations. Samples entailing two cavities, filled during the printing process, were successfully fabricated and showed, in simulated urine at body temperature, potential for controlled release, while maintaining the ability to recover about 70% of their original shape within 3 min.

A Systematic Overview of Eudragit® Based Copolymer for Smart Healthcare

Eudragit, synthesized by radical polymerization, is used for enteric coating, precise temporal release, and targeting the entire gastrointestinal system. Evonik Healthcare Germany offers different grades of Eudragit. The ratio of methacrylic acid to its methacrylate-based monomers used in the polymerization reaction defines the final product's characteristics and consequently its potential range of applications. Since 1953, these polymers have been made to use in a wide range of healthcare applications around the world. In this review, we reviewed the "known of knowns and known of unknowns" about Eudragit, from molecule to material design, its characterization, and its applications in healthcare.

Composition-Property Relationships of pH-Responsive Poly[(2-vinylpyridine)-co-(butyl methacrylate)] Copolymers for Reverse Enteric Coatings

The taste-masking of bitter-tasting active pharmaceutical ingredients is key to ensuring patient compliance when producing oral pharmaceutical formulations. This is generally achieved via the incorporation of pH-responsive, reverse enteric polymers, that prevent the dissolution of the formulation in the oral environment, but rapidly mediate it within the gastric environment. Reverse enteric polymers are commonly applied as coatings on oral dosage forms via spray atomisation (e.g., fluidised-bed spray coating), and generally exhibit the most efficient taste-masking. However, currently used reverse enteric coatings require high mass gains (% w/w) during coating to mediate taste-masking, and thereby exhibit delayed release within the gastric environment. Therefore, there remains a need for the development of new reverse enteric coatings, that can efficiently taste-mask at low mass gains and maintain rapid release characteristics within the gastric environment. Herein we report the synthesis and evaluation of a series of addition copolymers of 2-vinylpyridine and butyl methacrylate, methyl methacrylate and isobornyl methacrylate. The thermal, solubility, and water absorption properties of the copolymers were effectively tuned by altering the mol% fraction of the constitutive monomers. Based on their physical properties, selected copolymers were preliminarily evaluated for their compatibility with fluidised-bed spray coating, and effectiveness as taste-masking reverse enteric coatings. The copolymers poly[(2-vinylpyridine)-co-(butyl methacrylate)] (mol% ratio 40:60) and poly[(2-vinylpyridine)-co-(butyl methacrylate)-co-(methyl methacrylate)] (mol% ratio 40:50:10) were found to exhibit excellent taste-masking properties following fluidised-bed spray coating onto Suglets^® sugar spheres. Suglets^® bearing a film coating of either copolymer (5.2-6.5% w/w mass gain) were found to effectively impede the release of a model drug formulation for up to 72 h in a simulated salivary environment, and rapidly release it (<10 min) within a simulated gastric environment. The results demonstrated the potential of poly[(2-vinylpyridine)-co-(butyl methacrylate)] copolymers to form effectively taste-masked, reverse enteric dosage forms, and suggested that these copolymers may provide improved performance compared to currently available polymers.

Exploration of polymethacrylate and Hypromellose for the development of a non-sulfhydryl ACE inhibitor mucoadhesive system using Box-Behnken design: in-vitro and ex-vivo evaluation

PURPOSE

To counteract early morning pathology like hypertension a time-dependent release of the drug is required. This study is focused to formulate a pulsatile and mucoadhesive drug delivery system of an ACE inhibitor Perindopril Erbumine.

METHOD

Two matrix tablets were punched with Eudragit RSPO, Eudragit RLPO, and HPMC K15M using a 3-3-3 Box-Behnken Design of Response Surface Methodology. Based on the design-optimized formulation P1T3 and P2T8 were coated for a lag time with compression coating of HPMC K4M and a blend of 1:1 ratio of ethylcellulose and carbopol polymer and further encapsulated in a Eudracap™ capsule to provide gastric resistance.

RESULT

The in-vitro release data confirmed an initial pause phase of 4.5 h then release of the drug for 5.2 ± 0.3 h to cope with the early morning rush in blood pressure. After that, a gap of 6 h and then sustained release of the drug for 10.5 ± 0.5 h. From the ex-vivo study, mucoadhesive strength was obtained as 55.13 ± 0.03 gm and 56.39 ± 0.02 gm for P1T3 and P2T8 respectively. The lag time for coated tablet P1T3 came to 2.15 ± 0.15 h and for P2T8 11.9 ± 0.10 h proving the coating efficiency of polymers.

CONCLUSION

The current study strongly suggests that perindopril Erbumine in association with Eudragit and Hypromellose polymer can open a path for the time-regulated release of the drug for hypertension chronotherapy with less risk of dose dumping.

Thymol-Loaded Eudragit RS30D Cationic Nanoparticles-Based Hydrogels for Topical Application in Wounds: In Vitro and In Vivo Evaluation

Natural medicines formulated using nanotechnology-based systems are a rich source of new wound-treating therapeutics. This study aims to develop thymol-loaded cationic polymeric nanoparticles (CPNPs) to enhance the skin retention and wound healing efficacy of thymol. The developed materials exhibited entrapment efficiencies of 56.58 to 68.97%, particle sizes of 36.30 to 99.41 nm, and positively charged zeta potential. In Vitro sustained release of thymol up to 24 h was achieved. Selected thymol CPNPs (F5 and C2) were mixed with methylcellulose to form hydrogels (GF5 and GC2). An In Vivo skin-retention study revealed that GF5 and GC2 showed 3.3- and 3.6-fold higher retention than free thymol, respectively. An In Vitro scratch-wound healing assay revealed a significant acceleration in wound closure at 24 h by 58.09% (GF5) and 57.45% (GC2). The potential for free thymol hydrogel, GF5, and GC2 to combat MRSA in a murine skin model was evaluated. The bacterial counts, recovered from skin lesions and the spleen, were assessed. Although a significant reduction in the bacterial counts recovered from the skin lesions was shown by all three formulations, only GF5 and GC2 were able to reduce the bacterial dissemination to the spleen. Thus, our study suggests that Eudragit RS30D nanoparticles-based hydrogels are a potential delivery system for enhancing thymol skin retention and wound healing activity.

Bioadhesive Tannic-Acid-Functionalized Zein Coating Achieves Engineered Colonic Delivery of IBD Therapeutics via Reservoir Microdevices

The biggest challenge in oral delivery of anti-inflammatory drugs such as 5-aminosalicylic acid (5-ASA) is to (i) prevent rapid absorption in the small intestine and (ii) achieve localized release at the site of inflammation in the lower gut, i.e., the colon. Here, we present an advanced biopolymeric coating comprising of tannic-acid-functionalized zein protein to provide a sustained, colon-targeted release profile for 5-ASA and enhance the mucoadhesion of the dosage form via a mussel-inspired mechanism. To enable localized delivery and provide high local concentration, 5-ASA is loaded into the microfabricated drug carriers (microcontainers) and sealed with the developed coating. The functionality and drug release profile of the coating are characterized and optimized in vitro, showing great tunability, scalability, and stability toward proteases. Further, ex vivo experiments demonstrate that the tannic acid functionalization can significantly enhance the mucoadhesion of the coating, which is followed up by in vivo investigations on the intestinal retention, and pharmacokinetic evaluation of the 5-ASA delivery system. Results indicate that the developed coating can provide prolonged colonic delivery of 5-ASA. Therefore, the here-developed biodegradable coating can be an eco-friendly substitute to the state-of-the-art commercial counterparts for targeted delivery of 5-ASA and other small molecule drugs.

Buccal Thin Films as Potent Permeation Enhancers for Cytisine Transbuccal Delivery

Cytisine (CYT) is a powerful anti-smoking compound which could greatly benefit from transbuccal delivery because of both its unfavorable pharmacokinetics after oral administration and its intrinsic ability to permeate the buccal mucosa. This work aims to design CYT-loaded buccal thin films suitable for transbuccal drug delivery due to its capability of promoting the interaction between CYT and the buccal membrane. The solvent casting method was employed to prepare several thin films combining various excipients such as matrixing polymers, mucoadhesion agents, plasticizers and other compounds as humectants and sweeteners, component ratios and solvents. A total of 36 compositions was prepared and four of them emerged as the most promising in terms of aspect and flexibility. They all demonstrated homogeneity, thinness, low swelling degree, and controlled drug release according to the Power Law and Peppas-Sahlin mathematical models. Mainly, they proved able to interact with the ex vivo porcine buccal mucosa producing mucoadhesive effects, and act as potent permeation enhancers. In particular, Film B emerged as suitable as it produced a 10.6-fold Kp enhancement and a great Js value (52.33 μg/cm²·h^-1), even when compared to highly concentrated CYT solutions.

Immediate release 3D printed oral dosage forms: How different polymers have been explored to reach suitable drug release behaviour

Three-dimensional (3D) printing has been gaining attention as a new technological approach to obtain immediate release (IR) dosage forms. The versatility conferred by 3D printing techniques arises from the suitability of using different polymeric materials in the production of solids with different porosities, geometries, sizes, and infill patterns. The appropriate choice of polymer can facilitate in reaching IR specifications and afford other specific properties to 3D printed solid dosage forms. This review aims to provide an overview of the polymers that have been employed in the development of IR 3D printed dosage forms, mainly considering their in vitro drug release behaviour. The physicochemical and mechanical properties of the IR 3D printed dosage forms will also be discussed, together with the manufacturing process strategies. Up to now, methacrylic polymers, cellulosic polymers, vinyl derivatives, glycols and different polymeric blends have been explored to produce IR 3D printed dosage forms. Their effects on drug release profiles are critically discussed here, giving a complete overview to drive formulators towards a rational choice of polymeric material and thus contributing to future studies in 3D printing of pharmaceuticals.

Spray-Dried Cytisine-Loaded Matrices: Development of Transbuccal Sustained-Release Tablets as a Promising Tool in Smoking Cessation Therapy

Cytisine (CYT) has emerged as a promising molecule to treat nicotine addiction, since it acts as a partial agonist of nicotinic acetylcholine receptors. However, its unfavorable pharmacokinetic properties lead to multiple administrations per day, reducing the patient’s compliance and increasing the side effects. To overcome these drawbacks, CYT buccal administration is here proposed. Firstly, CYT stability in the buccal environment was assessed and its intrinsic ability to permeate/penetrate the tissue was determined by applying CYT solutions at increasing concentrations. Furthermore, a spray-drying method was selected and optimized as it is an eco-friendly, easily scalable and effective technique to obtain uniform and reproducible CYT-loaded (5% w/w) pharmaceutical powders, which were directly compressed, thus obtaining different buccal delivery systems (BDSs). The obtained BDSs were homogeneous and reproducible and embedded CYT in its amorphous form. The mechanism of CYT release was evaluated in vitro and found to be mainly driven by a Fickian diffusion phenomenon. Predominantly, the ex vivo permeation assays highlighted the ability of the BDSs to enhance CYT permeation, also producing high drug fluxes through the mucosa. Speculative mathematical evaluations based on the already-known CYT pharmacokinetic parameters showed that CYT-loaded BDSs could potentially be sufficient to obtain a therapeutic effect, thus making the reported formulations suitable candidates for further in vivo trials.

Development of Fenofibrate/Randomly Methylated β-Cyclodextrin-Loaded Eudragit® RL 100 Nanoparticles for Ocular Delivery

Fenofibrate (FE) has been shown to markedly reduce the progression of diabetic retinopathy and age-related macular degeneration in clinical trials and animal models. Owing to the limited aqueous solubility of FE, it may hamper ocular bioavailability and result in low efficiency to treat such diseases. To enhance the solubility of FE, water-soluble FE/cyclodextrin (CD) complex formation was determined by a phase-solubility technique. Randomly methylated-β-CD (RMβCD) exhibited the best solubility and the highest complexation efficiency (CE) for FE. Additionally, water-soluble polymers (i.e., hydroxypropyl methyl cellulose and polyvinyl alcohol [PVA]) enhanced the solubility of FE/RMβCD complexes. Solid- and solution-state characterizations were performed to elucidate and confirm the formation of inclusion FE/RMβCD complex. FE-loaded Eudragit^® nanoparticle (EuNP) dispersions and suspensions were developed. The physicochemical properties (i.e., pH, osmolality, viscosity, particle size, size distribution, and zeta potential) were within acceptable ranges. Moreover, in vitro mucoadhesion, in vitro release, and in vitro permeation studies revealed that the FE-loaded EuNP eye drop suspensions had excellent mucoadhesive properties and sustained FE release. The hemolytic activity, hen’s egg test on chorioallantoic membrane assay, and in vitro cytotoxicity test showed that the FE formulations had low hemolytic activity, were cytocompatible, and were moderately irritable to the eyes. In conclusion, PVA-stabilized FE/RMβCD-loaded EuNP eye drop suspensions were successfully developed, warranting further in vivo testing.

Cationic polymer contributes to broaden the spectrum of vancomycin activity achieving eradication of Pseudomonas aeruginosa

Vancomycin (VAN) is unable to penetrate the outer membrane of Gram-negative bacteria and reach the target site. One approach to overcome this limitation is to associate it with compounds with permeabilizing or antimicrobial properties. Eudragit E100^® (Eu) is a cationic polymer insufficiently characterized for its potential antimicrobial action. Eu-VAN combinations were characterized, the antimicrobial efficacy against Pseudomonas aeruginosa was evaluated and previous studies on the effects of Eu on bacterial envelopes were extended. Time-kill assays showed eradication of P. aeruginosa within 3-6 h exposure to Eu-VAN, whilst VAN was ineffective. Eu showed regrowth in 24 h and delayed colony pigmentation. Although permeabilization of bacterial envelopes or morphological alterations observed by TEM and flow cytometry after exposure to Eu were insufficient to cause bacterial death, they allowed access of VAN to the target site, since Eu-VAN/Van-FL-treated cultures showed fluorescent staining in all bacterial cells, indicating Van-FL internalization. Consequently, Eu potentiated the activity of an otherwise inactive antibiotic against P. aeruginosa. Moreover, Eu-VAN combinations exhibited improved physicochemical properties and could be used in the development of therapeutic alternatives in the treatment of bacterial keratitis.

Pharmacokinetic control on the release of antimicrobial drugs from pH-responsive electrospun wound dressings

The acidic pH of healthy skin changes during wound healing due to the exposure of the inner dermal and subcutaneous tissue and due to the potential colonization of pathogenic bacteria. In chronic non-healing wounds, the pH values vary in a wide pH range but the appearance of an alkaline shift is common. After a wound is incurred, neutral pH in the wound bed is characteristic of the activation of the cascade of regenerative and remodeling processes. In order to adjust drug release to the specific pH of the wound, herein, drug-loaded wound dressings having pH-responsiveness containing antiseptics and antibiotics and exerting different release kinetics in order to have a perfect match between the drug release kinetics, and the pH conditions of each wound type, were developed. We have fabricated drug-loaded electrospun nanofibers loaded with the antiseptic chlorhexidine, with the broad-spectrum antibiotic rifampicin, and with the antimicrobial of natural origin thymol, using the pH-dependent methacrylic acid copolymer Eudragit® L100-55, which dissolves at pH > 5.5; those drugs were loaded within Eudragit® S100, which dissolves at pH > 7 and, finally, within the methacrylic ester copolymer Eudragit® RS100 which is pH independent and slowly erodes and releases its contained cargo. The antibacterial action of those advanced wound dressings has been evaluated against methicillin-sensitive S. aureus Newman strain expressing the coral green fluorescent protein (cGFP), as a model of a Gram-positive bacteria, and against E. coli S17 strain as a model of a Gram-negative bacteria. It was demonstrated that those combinational products integrate in one device the required characteristics for a wound dressing with the therapeutic action of a contained active principle and can be selected depending on the wound acidic or alkaline status for its appropriated management.

Risk Assessment and QbD-Based Optimization of Sorafenib Tosylate Colon Targeted Bilayer Tablet: In Vitro Characterization, In Vivo Pharmacokinetic, and In Vivo Roentgenography Studies

The employment of site-specific administration in colon is a promising technique to improve efficacy and reduce systemic side effects of anticancer medications used in colorectal cancer. However, the physiology of the gastrointestinal tract and colonic environment limit the efficient delivery of orally administered anticancer drugs to the colon. These prerequisites can be fulfilled by a release modulated colon targeted drug delivery system (CTDDS) based on pH-dependent chronotherapeutic bilayer tablet of sorafenib tosylate (ST). Quality by design (QbD) was used to examine the risk assessment. The Box-Behnken design was used to optimize the core uncoated bilayer tablet, whereas the 2² factorial design was used to optimize the coating process. The amount of croscarmellose sodium, Eudragit^® RLPO, and tablet hardness all had a significant impact on disintegration time and drug release, according to the results of the core uncoated bilayer optimization. The amount of Eudragit^® S 100 and PEG 400 in the final coated tablet had a considerable impact on drug release. The optimized formulation demonstrated 5-h lag time, a peculiar feature of CTDDS. The pharmacokinetic studies of coated tablet in rabbits showed lower C_max (4.45 ± 0.40 µg/mL) and AUC (148.52 ± 3.96 h µg/mL), whereas T_max was substantially delayed (8.0 ± 0.57 h) compared to core uncoated tablet. The tablet remained intact until it reached the colon (> 4 h), according to the in vivo roentgenography studies. The present study revealed that a QbD approach can be useful to develop a rugged and scalable CTDDS.

Chitosan-based oral colon-specific delivery systems for polyphenols: recent advances and emerging trends

Oral colon-targeted delivery systems (OCDSs) have attracted great attention in the delivery of active compounds targeted to the colon for the treatment of colon and non-colon diseases with the advantages of enhanced efficacy and reduced side effects. Chitosan, the second-most abundant biopolymer next to cellulose, has great biocompatibility, is non-toxic, is sensitive to colonic flora and shows strong adhesion to colonic mucus, making it an ideal biomaterial candidate for the construction of OCDSs. Being rich in functional groups, the chitosan structure is easily modified, both physically and chemically, for the fabrication of delivery systems with diverse geometries, including nanoparticles, microspheres/microparticles, and hydrogels, that are resistant to the harsh environment of the upper gastrointestinal tract (GIT). This review offers a detailed overview of the preparation of chitosan-based delivery systems as the basis for building OCDSs. A variety of natural polyphenols with potent biological activities are used to treat diseases of the colon, or to be metabolized as active ingredients by colonic microorganisms to intervene in remote organ diseases after absorption into the circulation. However, the poor solubility of polyphenols limits their application, and the acidic environment of the upper GIT and various enzymes in the small intestine disrupt their structure and activity. As a result, the development of OCDSs for polyphenols has become an emerging and popular area of current research in the past decade. Thus, the second objective of this review is to systematically summarize the most recent research findings in this area and shed light on the future development of chitosan-based OCDSs for nutritional and biomedical applications.

Formulation Development and Pharmaceutical Evaluation of Lysiphyllum strychnifolium Topical Patches for Their Anti-inflammatory Potential

Topical drug delivery systems are interesting and popular dosage forms for formulation development. Thai herbs are used in alternative medicine to treat patients suffering from severe illnesses. They have significant economic and cultural value in Thailand. This work prepared Thai herbal topical patches of Lysiphyllum strychnifolium stem extracts using pectin and Eudragit^® NM 30D, and glycerin as a plasticizer. Astilbin was selected as a chemical marker in L. strychnifolium stem extracts. The L. strychnifolium stem extracts showed a statistically significant decrease in nitrate accumulation. The various properties of Thai herbal topical patches were not significantly different from blank patches. However, the trends of the properties depended on the amount of Eudragit^® NM 30D. All ingredients were homogeneously mixed in Thai herbal topical patches and showed a smooth and compact film. The astilbin content was found in a range of 52.72-63.36 μg/cm². The in vitro release of astilbin depended on the amount of Eudragit^® NM 30D. The kinetics of astilbin release were fitted to the Korsmeyer-Peppas model. The astilbin showed low permeation; thus, polyethylene glycol 400 was used as a permeation enhancer. Polyethylene glycol 400 could increase the permeation rates of astilbin and the cumulative amount of astilbin in pig skin. This would be suitable for preparing the Thai herbal topical patches and could be developed for pharmaceutical and herbal products.

Interactions between Nanoparticles and Intestine

The use of nanoparticles (NPs) has surely grown in recent years due to their versatility, with a spectrum of applications that range from nanomedicine to the food industry. Recent research focuses on the development of NPs for the oral administration route rather than the intravenous one, placing the interactions between NPs and the intestine at the centre of the attention. This allows the NPs functionalization to exploit the different characteristics of the digestive tract, such as the different pH, the intestinal mucus layer, or the intestinal absorption capacity. On the other hand, these same characteristics can represent a problem for their complexity, also considering the potential interactions with the food matrix or the microbiota. This review intends to give a comprehensive look into three main branches of NPs delivery through the oral route: the functionalization of NPs drug carriers for systemic targets, with the case of insulin carriers as an example; NPs for the delivery of drugs locally active in the intestine, for the treatment of inflammatory bowel diseases and colon cancer; finally, the potential concerns and side effects of the accidental and uncontrolled exposure to NPs employed as food additives, with focus on E171 (titanium dioxide) and E174 (silver NPs).

Pharmacokinetics and Safety of the Abacavir/Lamivudine/Lopinavir/Ritonavir Fixed-Dose Granule Formulation (4-in-1) in Neonates: PETITE Study

BACKGROUND

Antiretroviral options for neonates (younger than 28 days) should be expanded. We evaluated the pharmacokinetics, safety, and acceptability of the "4-in-1" fixed-dose pediatric granule formulation of abacavir/lamivudine/lopinavir/ritonavir (30/15/40/10 mg) in neonates.

METHODS

The PETITE study is an ongoing phase I/II, open-label, single-arm, 2-stage trial conducted in South Africa. In stage 1, term neonates exposed to HIV on standard antiretroviral prophylaxis (nevirapine ± zidovudine) received single dose(s) of the 4-in-1 formulation, followed by intensive pharmacokinetic sampling and safety assessments. At each PK visit, blood was drawn after an observed dose at 1, 2, 4, 8, and 12 hours postdose. In this study, we have reported the planned interim pharmacokinetic and safety analysis after completion of the single-dose administration.

RESULTS

Sixteen neonates, with a median (range) birth weight of 3130 g (2790-3590 g), completed 24 pharmacokinetic visits. The 4-in-1 formulation imposed relatively high doses of abacavir [8.6 mg/kg (6.6-11.4)] and lamivudine [4.3 mg/kg (3.3-5.7)] but lower doses of lopinavir [11.5 mg/kg (8.8-15.2)]. The geometric means (GM, 90% CI) AUC0-12 of abacavir, lamivudine, and lopinavir were 29.87 (26.29-33.93), 12.61 (10.72-14.83), and 3.49 (2.13-5.72) µg.h/mL, respectively. Lopinavir GM AUC0-12 was below the predefined target (20-100 µg.h/mL), and ritonavir concentrations were only detectable in 4 of the 120 (3%) samples. No adverse events were related to study drugs. No neonate had difficulty swallowing the 4-in-1 formulation.

CONCLUSIONS

The high doses of abacavir and lamivudine (in mg/kg) and AUCs were safe, and the formulation was well tolerated; however, lopinavir/ritonavir exposures were extremely low, preventing its use in neonates use in neonates. Alternative pediatric solid antiretroviral formulations must be studied in neonates.

Amperometric Monitoring of Dissolution of pH-Responsive EUDRAGIT® Polymer Film Coatings

Electrochemical sensors are powerful tools for the detection and real-time monitoring of a wide variety of analytes. However, the long-term operation of Faradaic sensors in complex media is challenging due to fouling. The protection of the electrode surface during in vivo operation is a key element for improving the monitoring of analytes. Here, we study different EUDRAGIT^® controlled release acrylate copolymers for protecting electrode surfaces. The dissolution of these polymers—namely EUDRAGIT^® L 30 D-55 and EUDRAGIT^® FS 30 D—is triggered by a change in pH of the environment, and it is electrochemically monitored by detecting electrode access by means of a redox probe. The full dissolution of the polymer is achieved within 30 min and the electrode response indicates a complete recovery of the original electrochemical performance. We demonstrate that amperometric sensing is a practical and straightforward technique for real-time and in situ sensing of EUDRAGIT^® dissolution profiles. It will find future applications in determining the protection of polymer electrode coating in real matrices and in vivo applications.

Effects of Process and Formulation Parameters on Submicron Polymeric Particles Produced by a Rapid Emulsion-Diffusion Method

Emulsification-diffusion method is often used to produce polymeric nanoparticles. However, their numerous and/or lengthy steps make it difficult to use widely. Thus, a modified method using solvent blends (miscible/partially miscible in water, 25–100%) as the organic phases to overcome these disadvantages and its design space were investigated. To further simplify the process, no organic/aqueous phase saturation and no water addition after the emulsification step were performed. Biodegradable (PLGA) or pH-sensitive (Eudragit^® E100) nanoparticles were robustly produced using low/medium shear stirring adding dropwise the organic phase into the aqueous phase or vice versa. Several behaviors were also obtained: lowering the partially water-miscible solvent ratio relative to the organic phase or the poloxamer-407 concentration; or increasing the organic phase polarity or the polyvinyl alcohol concentration produced smaller particle sizes/polydispersity. Nanoparticle zeta potential increased as the water-miscible solvent ratio increased. Poloxamer-407 showed better performance to decrease the particle size (~50 nm) at low concentrations (≤1%, w/v) compared with polyvinyl alcohol at 1–5% (w/v), but higher concentrations produced bigger particles/polydispersity (≥600 nm). Most important, an inverse linear correlation to predict the particle size by determining the solubility parameter was found. A rapid method to broadly prepare nanoparticles using straightforward equipment is provided.

Formulation and development of novel control release transdermal patches of carvedilol to improve bioavailability for the treatment of heart failure

The main aim of this study is to optimize and evaluate transdermal patch of Carvedilol by the use of different polymer and different permeation enhancers which help to release drug in controlled action and thereby increase the bioavailability of the drug. Main objective was to avoid first pass metabolism of Carvedilol. Transdermal patches were developed by solvent evaporation method. The combination of Eudragit RS-100 as rate controlling polymer and Span 80 as a permeation enhancer was found to be ideal formulation (Formulation F7) with maximum drug release i.e. 100.29 ± 0.44 % within 12 h. Formulation F7 showed maximum bioavailability and showed maximum drop of BP at 6 h. From this study the conclusion was, transdermal patch of Carvedilol which contains Eudragit RS-100 polymer and Span 80 as penetration enhancer produced sustained and continued drug release.

Preparation and characterization of colon-targeted pH/Time-dependent nanoparticles using anionic and cationic polymethacrylate polymers

Inflammatory bowel disease (IBD), which is a chronic inflammatory disease of the gastrointestinal system, has two subtypes: Ulcerative Colitis (UC) and Crohn's Disease (CD). Only pH-sensitive drug delivery systems are commonly utilized for the treatment of IBD, but their effectiveness is frequently obstructed by the change in intestinal pH. To overcome the inadequacy of only pH-dependent delivery systems, we developed in vitro evaluated both pH- and time-dependent nanoparticles loaded budesonide (BUD) for the treatment of IBD in this study. Anionic polymethacrylate was utilized as a pH-dependent polymer whereas cationic polymethacrylate was utilized as a time-dependent sustained release polymer. Nanoparticles were prepared through a single oil-in-water emulsion/solvent evaporation method. The encapsulation efficiency, mean particle size, zeta potential, polydispersity index (PDI), drug release profiles, drug release kinetics, and stability of these nanoparticles were investigated. In all formulations, mean particle sizes were below 250 nm and PDI values were between 0.1 and 0.3. Nanoparticles containing 90% anionic-10% cationic polymethacrylate polymers inhibited burst BUD release under acidic conditions and exhibited sustained drug release at neutral pH. Consequently, in the medication of IBD, BUD-loaded pH and time-dependent nanoparticles may be a promising choice as a drug delivery system.

Synthesis of Eudragit® L100-coated chitosan-based nanoparticles for oral enoxaparin delivery

Enoxaparin is an effective biological molecule for prevention and treatment of coagulation disorders. However, it is poorly absorbed in the gastrointestinal tract. In this study, we developed an Eudragit® L100 coated chitosan core shell nanoparticles for enoxaparin oral delivery (Eud/CS/Enox NPs) through a completely eco-friendly method without employing any high-energy homogenizer technique and any organic solvents. Spherical nanocarriers were successfully prepared with particle size lower than 300 nm, polydispersity index about 0.12 and zeta potential higher than +25 mV, entrapment efficiency greater than 95% and the in vitro release behavior confirms the good colloidal stability and the successful Eudragit® L100 coating process demonstrated by negligible cumulative enoxaparin release (<10%) when the particles are submitted to simulated gastric fluid conditions. Finally, we demonstrated that the core-shell structure of the particle influenced the drug release mechanism of the formulations, indicating the presence of the Eudragit® L100 on the surface of the particles. These results suggested that enteric-coating approach and drug delivery nanotechnology can be successfully explored as potential tools for oral delivery of enoxaparin.

Sustainable Stabilizer-Free Nanoparticle Formulations of Valsartan Using Eudragit® RLPO

The bioavailability of the antihypertensive drug valsartan can be enhanced by various microencapsulation methods. In the present investigation, valsartan-loaded polymeric nanoparticles were manufactured from Eudragit® RLPO using an emulsion-solvent evaporation method. Polyvinyl alcohol (PVA) was found to be a suitable stabilizer for the nanoparticles, resulting in a monodisperse colloid system ranging in size between 148 nm and 162 nm. Additionally, a high encapsulation efficiency (96.4%) was observed. However, due to the quaternary ammonium groups of Eudragit® RLPO, the stabilization of the dispersion could be achieved in the absence of PVA as well. The nanoparticles were reduced in size (by 22%) and exhibited similar encapsulation efficiencies (96.4%). This more cost-effective and sustainable production method reduces the use of excipients and their expected emission into the environment. The drug release from valsartan-loaded nanoparticles was evaluated in a two-stage biorelevant dissolution set-up, leading to the rapid dissolution of valsartan in a simulated intestinal medium. In silico simulations using a model validated previously indicate a potential dose reduction of 60-70% compared to existing drug products. This further reduces the expected emission of the ecotoxic compound into the environment.

Cationic and Biocompatible Polymer/Lipid Nanoparticles as Immunoadjuvants

Nanostructures have been of paramount importance for developing immunoadjuvants. They must be cationic and non-cytotoxic, easily assembling with usually oppositely charged antigens such as proteins, haptens or nucleic acids for use in vaccines. We obtained optimal hybrid nanoparticles (NPs) from the biocompatible polymer poly(methyl methacrylate) (PMMA) and the cationic lipid dioctadecyl dimethyl ammonium bromide (DODAB) by emulsion polymerization of methyl methacrylate (MMA) in the presence of DODAB. NPs adsorbed ovalbumin (OVA) as a model antigen and we determined their adjuvant properties. Interestingly, they elicited high double immune responses of the cellular and humoral types overcoming the poor biocompatibility of DODAB-based adjuvants of the bilayer type. The results suggested that the novel adjuvant would be possibly of use in a variety of vaccines.