Recent approaches in physical modification of protein functionality

In vitro digestion and functional properties of bovine β-casein: A comparison between adults and infants

Gastrointestinal digestibility behavior, structural and functional characteristics of bovine β-casein (β-CN) were studied in vitro under infant and adult conditions. This direct comparison helps reveal the effects of different physiological stages on the digestive behavior of β-CN. Not only was the degree of hydrolysis (DH) of β-CN analyzed, but also the changes in its digestive morphology, microstructure, and secondary structure during digestion were explored in depth. Meanwhile, we focused on the physicochemical properties of β-CN digesta, including solubility, emulsifying and foaming properties, as well as their functional properties, such as antimicrobial and antioxidant activities. Key results showed that β-CN underwent more extensive hydrolysis in the adult digestion model, with approximately twice the DH compared to the infant model. The adult model exhibited faster digestion kinetics, less protein flocculation, and a more loosened secondary structure, indicating a more efficient digestion process. Notably, the digesta from the adult model displayed significantly improved solubility and emulsifying properties, and also enhanced antioxidant capacities, with significantly better inhibition of two common pathogenic bacteria than the infant model, and an average increase in the diameter of the inhibition zone of approximately 2 mm. These findings underscore the differential digestive behavior and functional potential of β-CN across physiological stages. This comprehensive assessment approach contributes to a more comprehensive insight into the digestive behavior of β-CN. Therefore, we conclude that producing products from unmodified β-CN may be more suitable for the adult population, and that the digesta in the adult model exhibit higher functional properties.

Investigating the impact of ultrasound on the structural, physicochemical, and emulsifying characteristics of Dioscorin: Insights from experimental data and molecular dynamics simulation

This study investigated the impact of ultrasound treatment on dioscorin, the primary storage protein found in yam tubers. Three key factors, namely ultrasound power, duration, and frequency, were focused on. The research revealed that ultrasound-induced cavitation effects disrupted non-covalent bonds, resulting in a reduction in α-helix and β-sheet contents, decreased thermal stability, and a decrease in the apparent hydrodynamic diameter (Dh) of dioscorin. Additionally, previously hidden amino acid groups within the molecule became exposed on its surface, resulting in increased surface hydrophobicity (Ho) and zeta-potential. Under specific ultrasound conditions (200 W, 25 kHz, 30 min), Dh decreased while Ho increased, facilitating the adsorption of dioscorin molecules onto the oil-water interface. Molecular dynamics (MD) simulations showed that at lower frequencies and pressures, the structural flexibility of dioscorin's main chain atoms increased, leading to more significant fluctuations between amino acid residues. This transformation improved dioscorin's emulsifying properties and its oil-water interface affinity.

Manothermosonication - A potential alternative to thermal pasteurisation of liquid whole egg: Comparison of physico-chemical attributes

Liquid egg products are typically exposed to a defined thermal load to achieve the required safety level, under which their functional properties can be adversely affected. In this study, manothermosonication (MTS) (132 μm, 300 kPa) was investigated as alternative preservation for liquid whole egg (LWE) compared to thermal pasteurisation (60 °C, 3.5 min), assessing results against untreated (fresh) LWE in terms of selected physico-chemical properties. Results showed that MTS resulted in improved LWE foaming properties, increasing foam capacity by a 3.2-fold factor compared to thermal treatment. Emulsion stability was also enhanced after MTS, exhibiting smaller droplet size, and a higher elasticity of gels was obtained. Regarding the protein properties, favourable protein changes (protein unfolding) were identified for MTS through direct (asymmetric flow field flow fractionation) and indirect (surface hydrophobicity and sulfhydryl group content) measurements. In addition, an increase in protein solubility of 11.4 % was observed in MTS compared to thermal treatment.

Emulsifying properties of egg proteins: Influencing factors, modification techniques, and applications

As an essential food ingredient with good nutritional and functional properties and health benefits, eggs are widely utilized in food formulations. In particular, egg proteins have good emulsification properties and can be commonly used in various food products, such as mayonnaise and baked goods. Egg protein particles can act as stabilizers for Pickering emulsions because they can effectively adsorb at the oil-water interface, reduce interfacial tension, and form a stable physical barrier. Due to their emulsifying properties, biocompatibility, controlled release capabilities, and ability to protect bioactive substances, egg proteins have become ideal carriers for encapsulating and delivering functional substances. The focus of this review is to summarize current advances in using egg proteins as emulsifiers. The effects of influencing factors (temperature, pH, and ionic strength) and various modification methods (physical, chemical, and biological modification) on the emulsifying properties of egg proteins are discussed. In addition, the application of egg proteins as emulsifiers in food products is presented. Through in-depth research on the emulsifying properties of egg proteins, the optimization of their applications in food, biomedical, and other fields can be achieved.

Possibility and challenge of plant-derived ferritin cages encapsulated polyphenols in the precise nutrition field

Polyphenols have attracted extensive attention due to their rich functional activities, such as antioxidant, anti-inflammatory and anti-tumor. However, the low solubility and poor stability limit their bioavailability and functional activities. Plant-derived ferritin cages have a unique hollow cage structure that can embed polyphenols to improve their unfavorable properties. Therefore, it is essential to adequately elaborate and summarize plant-derived ferritin cages to maximize their potential benefits in nutritional interventions. This review focuses on the fundamental properties of plant-derived ferritin cages, including the preparation process, purification technology, identification methods, and structural and functional properties. The relevant research on ferritin cages in polyphenol delivery has been summarized, including the delivery of water/lipid soluble polyphenols, modification of ferritin cages, and the interaction between polyphenols and ferritin cages. The research progress, shortcomings and prospects of plant-derived ferritin cages in precise nutrition are introduced. In addition, the relevant research on ferritin in immune response and protein engineering is also discussed to provide the theoretical basis for applying plant-derived ferritin cages in many frontier fields.

Modifications of the Structural, Nutritional, and Allergenic Properties of Atlantic Cod Induced by Novel Thermal Glycation Treatments

This study aimed to assess the effect of novel thermal glycation, utilizing microwave processing (100-150 °C) combined with sugars (glucose and lactose), on the in vitro protein digestibility, peptides, secondary structures, microstructures, and allergenic properties of Atlantic cod. The research demonstrated that microwave heating at 150 °C with glucose significantly reduced cod allergenicity by up to 16.16%, while also enhancing in vitro protein digestibility to 69.05%. Glucose was found to be more effective than lactose in conjunction with microwave heating in reducing the allergenicity of Atlantic cod. Moreover, treatments conducted at 150 °C were more effective in increasing in vitro protein digestibility and peptide content compared to those at 100 °C. This study revealed that the novel processing technique of thermal glycation effectively reduced the allergenicity of Atlantic cod. It also offered fresh insights into the potential benefits of combining microwave heating with sugars.

Effect of dual physical modifications on structural and functional properties of gluten and whey protein: Ultrasound and microwave

In this study, the effect of dual modification using ultrasound (100 and 300 W for 5, 10, and 15 min) and microwave (600 W for 45 s) treatments on functional properties of wheat gluten protein (WGP) and whey protein concentrate (WPC), as two by-products of food industry with different primary functional properties, was investigated. Ultrasound treatment did not affect the solubility of both proteins significantly but the emulsion and foam properties were increased up to 10 min. Nevertheless, microwave treatment after ultrasound caused a significant decrease in the solubility of both proteins. However, the foam stability of the WPC and WGP was not significantly modified after microwave treatment. The obtained results showed a more positive effect of ultrasound at 100 W for 10 min than other ultrasound treatments on the functional and structural properties of both proteins. The zeta potential of both proteins was decreased after dual physical modifications, but thermal stability of proteins was improved after microwave treatment.

Phycocyanin from microalgae: A comprehensive review covering microalgal culture, phycocyanin sources and stability

As food safety continues to gain prominence, phycocyanin (PC) is increasingly favored by consumers as a natural blue pigment, which is extracted from microalgae and serves the dual function of promoting health and providing coloration. Spirulina-derived PC demonstrates exceptional stability within temperature ranges below 45 °C and under pH conditions between 5.5 and 6.0. However, its application is limited in scenarios involving high-temperature processing due to its sensitivity to heat and light. This comprehensive review provides insights into the efficient production of PC from microalgae, covers the metabolic engineering of microalgae to increase PC yields and discusses various strategies for enhancing its stability in food applications. In addition to the most widely used Spirulina, some red algae and Thermosynechococcus can serve as good source of PC. The genetic and metabolic manipulation of microalgae strains has shown promise in increasing PC yield and improving its quality. Delivery systems including nanoparticles, hydrogels, emulsions, and microcapsules offer a promising solution to protect and extend the shelf life of PC in food products, ensuring its vibrant color and health-promoting properties are preserved. This review highlights the importance of metabolic engineering, multi-omics applications, and innovative delivery systems in unlocking the full potential of this natural blue pigment in the realm of food applications, provides a complete overview of the entire process from production to commercialization of PC, including the extraction and purification.

Legume protein fermented by lactic acid bacteria: Specific enzymatic hydrolysis, protein composition, structure, and functional properties

In recent years, with increasing emphasis on healthy, green, and sustainable consumption concepts, plant-based foods have gained popularity among consumers. As widely sourced plant-based raw materials, legume proteins are considered sustainable and renewable alternatives to animal proteins. However, legume proteins have limited functional properties, which hinder their application in food products. LAB fermentation is a relatively natural processing method that is safer than chemical/physical modification methods and can enrich the functional properties of legume proteins through biodegradation and modification. Therefore, changes in legume protein composition, structure, and functional properties and their related mechanisms during LAB fermentation are described. In addition, the specific enzymatic hydrolysis mechanisms of different LAB proteolytic systems on legume proteins are also focused in this review. The unique proteolytic systems of different LAB induce specific enzymatic hydrolysis of legume proteins, resulting in the production of hydrolysates with diverse functional properties, including solubility, emulsibility, gelability, and foamability, which are determined by the composition (peptide/amino acid) and structure (secondary/tertiary) of legume proteins after LAB fermentation. The correlation between LAB-specific enzymatic hydrolysis, protein composition and structure, and protein functional properties will assist in selecting legume protein raw materials and LAB strains for legume plant-based food products and expand the application of legume proteins in the food industry.

Endogenous reactive oxygen species (ROS)-driven protein oxidation regulates emulsifying and foaming properties of liquid egg white

Highly oxidative reactive oxygen species (ROS) attack protein structure and regulate its functional properties. The molecular structures and functional characteristics of egg white (EW) protein (EWP) during 28 d of aerobic or anaerobic storage were explored to investigate the "self-driven" oxidation mechanism of liquid EW mediated by endogenous ROS signaling. Results revealed a significant increase in turbidity during the storage process, accompanied by protein crosslinking aggregation. The ROS yield initially increased and then decreased, leading to a substantial increase in carbonyl groups and tyrosine content. The free sulfhydryl groups and molecular flexibility in EWP exhibited synchronicity with ROS production, reflecting the self-repairing ability of cysteine residues in EWP. Fourier-transform infrared spectroscopy indicated stable crosslinking between EWP molecules in the early oxidation stage. However, continuous ROS attacks accelerated EWP degradation. Compared with the control group, the aerobic-stimulated EWP showed a significant decrease in foaming capacity from 30.5 % to 9.6 %, whereas the anaerobic-stimulated EWP maintained normal levels. The emulsification performance exhibited an increasing-then-decreasing trend. In conclusion, ROS acted as the predominant factor causing deterioration of liquid EW, triggering moderate oxidation that enhanced the superior foaming and emulsifying properties of EWP, and excessive oxidation diminished the functional characteristics by affecting the molecular structure.

Plant-based proteins from agro-industrial waste and by-products: Towards a more circular economy

There is a pressing need for affordable, abundant, and sustainable sources of proteins to address the rising nutrient demands of a growing global population. The food and agriculture sectors produce significant quantities of waste and by-products during the growing, harvesting, storing, transporting, and processing of raw materials. These waste and by-products can sometimes be converted into valuable protein-rich ingredients with excellent functional and nutritional attributes, thereby contributing to a more circular economy. This review critically assesses the potential for agro-industrial wastes and by-products to contribute to global protein requirements. Initially, we discuss the origins and molecular characteristics of plant proteins derived from agro-industrial waste and by-products. We then discuss the techno-functional attributes, extraction methods, and modification techniques that are applied to these plant proteins. Finally, challenges linked to the safety, allergenicity, anti-nutritional factors, digestibility, and sensory attributes of plant proteins derived from these sources are highlighted. The utilization of agro-industrial by-products and wastes as an economical, abundant, and sustainable protein source could contribute towards achieving the Sustainable Development Agenda's 2030 goal of a "zero hunger world", as well as mitigating fluctuations in food availability and prices, which have detrimental impacts on global food security and nutrition.

Electrical Fields in the Processing of Protein-Based Foods

Electric field-based technologies offer interesting perspectives which include controlled heat dissipation (via the ohmic heating effect) and the influence of electrical variables (e.g., electroporation). These factors collectively provide an opportunity to modify the functional and technological properties of numerous food proteins, including ones from emergent plant- and microbial-based sources. Currently, numerous scientific studies are underway, contributing to the emerging body of knowledge about the effects on protein properties. In this review, "Electric Field Processing" acknowledges the broader range of technologies that fall under the umbrella of using the direct passage of electrical current in food material, giving particular focus to the ones that are industrially implemented. The structural and biological effects of electric field processing (thermal and non-thermal) on protein fractions from various sources will be addressed. For a more comprehensive contextualization of the significance of these effects, both conventional and alternative protein sources, along with their respective ingredients, will be introduced initially.

Flours from fermented lentil and quinoa grains as ingredients with new techno-functional properties

The need to provide novel, nutritious plant-based products requires seeking high-value, sustainable protein sources, like quinoa and lentils, having an increased digestibility and lacking antinutrients. Fungal fermentation has evidenced enhanced nutritional value of flours obtained from these grains. However, research into techno-functional properties, essential to the new product development, is lacking. This study investigated the techno-functional properties of flours made from lentil and quinoa after fermenting them with Pleurotus ostreatus and subjecting them to two drying techniques (lyophilisation and hot air drying). In both cases, the fermentation led to noteworthy improvements in swelling and water holding capacity, especially in those lyophilised than those dried. In contrast, the emulsifying, foaming, thickening, and gelling capacities decreased significantly. The loss of abilities was more severe for dried grains than for lyophilized ones. The thermomechanical analysis of the fermented flours showed lower thickening and gelling potential compared to untreated flours. Microscopy images revealed that the state and structure of starch granules were affected by both fermentation and drying processes. Starch granules in lentils were partly pre-gelatinised and trapped in the cotyledon cell, resulting in limited thickening and gelling abilities. In contrast, in quinoa, starch underwent pre-gelatinisation and retrogradation during the fermentation process, promoting the production of resistant starch and increasing fibre content. This study presents the potential of treated flours as ingredients possessing unique attributes compared to protein and fibre-rich conventional products.

Enhancing the Techno-Functional Properties of Lentil Protein Isolate Dispersions Using In-Line High-Shear Rotor-Stator Mixing

In response to global challenges such as climate change and food insecurity, plant proteins have gained interest. Among these, lentils have emerged as a promising source of proteins due to their good nutritional profile and sustainability considerations. However, their widespread use in food products has been impeded by limited solubility. This study aimed to investigate the potential of high-shear mixing, a resource-efficient technique, to enhance lentil protein solubility and its functional properties. Red lentil protein isolate powders were rehydrated and subjected to a semi-continuous in-line high-shear treatment at 10,200 rpm for a timespan ranging from 0 to 15 min. The results highlighted a significant (p < 0.05) increase in solubility from 46.87 to 68.42% after 15 min of shearing and a reduction in particle size as a result of the intense shearing and disruption provided by the rotor and forced passage through the perforations of the stator. The volume-weighted mean diameter decreased from 5.13 to 1.72 µm after 15 min of shearing, also highlighted by the confocal micrographs which confirmed the breakdown of larger particles into smaller and more uniform particles. Rheological analysis indicated consistent Newtonian behaviour across all dispersions, with apparent viscosities ranging from 1.69 to 1.78 mPa.s. Surface hydrophobicity increased significantly (p < 0.05), from 830 to 1245, indicating exposure of otherwise buried hydrophobic groups. Furthermore, colloidal stability of the dispersion was improved, with separation rates decreasing from 71.23 to 24.16%·h-1. The significant enhancements in solubility, particle size reduction, and colloidal stability, highlight the potential of in-line high-shear mixing in improving the functional properties of lentil protein isolates for formulating sustainable food products with enhanced techno-functional properties.

Replacing animal proteins with plant proteins: Is this a way to improve quality and functional properties of hybrid cheeses and cheese analogs?

The growing emphasis on dietary health has facilitated the development of plant-based foods. Plant proteins have excellent functional attributes and health-enhancing effects and are also environmentally conscientious and animal-friendly protein sources on a global scale. The addition of plant proteins (including soy protein, pea protein, zein, nut protein, and gluten protein) to diverse cheese varieties and cheese analogs holds the promise of manufacturing symbiotic products that not only have reduced fat content but also exhibit improved protein diversity and overall quality. In this review, we summarized the utilization and importance of various plant proteins in the production of hybrid cheeses and cheese analogs. Meanwhile, classification and processing methods related to these cheese products were reviewed. Furthermore, the impact of different plant proteins on the microstructure, textural properties, physicochemical attributes, rheological behavior, functional aspects, microbiological aspects, and sensory characteristics of both hybrid cheeses and cheese analogs were discussed and compared. Our study explores the potential for the development of cheeses made from full/semi-plant protein ingredients with greater sustainability and health benefits. Additionally, it further emphasizes the substantial chances for scholars and developers to investigate the optimal processing methods and applications of plant proteins in cheeses, thereby improving the market penetration of plant protein hybrid cheeses and cheese analogs.

How does ultrasound-assisted ionic liquid treatment affect protein? A comprehensive review of their potential mechanisms, safety evaluation, and physicochemical and functional properties

Proteins are essential to human health with enormous food applications. Despite their advantages, plant and animal proteins often exhibit limited molecular flexibility and poor solubility due to hydrogen bonds, hydrophobic interactions, and ionic interactions within their molecular structures. Thus, there is an urgent need to modify the rigid structure of proteins to enhance their stability and functional properties. Ultrasound-assisted ionic liquid (UA-IL) treatment for developing compound modification and producing proteins with excellent functional properties has received interest. However, no review specifically addresses the interactions between UA-ILs and proteins. Hence, this review focused on recent research advancements concerning the effects and potential reaction mechanisms of UA-ILs on the physicochemical properties (including particle size; primary, secondary, and tertiary structure; and surface morphology) as well as the functionality (such as solubility, emulsifying properties, and foaming ability) of proteins. Moreover, the safety evaluation of modified proteins was also discussed from various perspectives, such as acute and chronic toxicity, genotoxicity, cytotoxicity, and environmental and microbial toxicity. This review demonstrated that UA-IL treatment-induced protein structural changes significantly impact the functional characteristics of proteins. This treatment approach efficiently promotes protein structure stretching and spatial rearrangement through cavitation, thermal effects, and ionic interactions. As a result, the functional properties of modified proteins exhibited an obvious enhancement, thereby bringing more opportunities to utilize modified protein products in the food industry. Potential future directions for protein modification using UA-ILs were also proposed.

The technical potential of a sous-vide processing method for developing high-moisture textured soy protein

This study explored the potential of sous-vide processing as a novel technique for transforming low-moisture textured soy protein (TSP) into a product with high moisture content and texture comparable to meat. We hypothesized that the sous-vide treatment would enable precise control of the TSP microstructure. In the ensuing process, the TSP maintained the moisture content at approximately 70% and changed color towards darker tones. Additionally, the porous microstructure changed, transitioning from a large to a smaller air layer. As the treatment continued, both the hardness and texturization index of the TSP were reduced. Furthermore, the secondary structure of the protein exhibited an increase in β-sheet and α-helix structures, indicating enhanced hydrogen bonds, hydrophobic interactions, and disulfide bonds. Optimally, a sample with 24 h at 90℃ displayed textural characteristics similar to chicken breast. The investigation underlines the sous-vide method as a revolutionary technique yielding high-moisture content and improved texture for TSP.

Transglutaminase-Induced Polymerization of Pea and Chickpea Protein to Enhance Functionality

Pulse proteins, such as pea and chickpea proteins, have inferior functionality, specifically gelation, compared to soy protein, hindering their applications in different food products, such as meat analogs. To close the functionality gap, protein polymerization via targeted modification can be pursued. Accordingly, transglutaminase-induced polymerization was evaluated in pea protein isolate (PPI) and chickpea protein isolate (ChPI) to improve their functionality. The PPI and ChPI were produced following a scaled-up salt extraction coupled with ultrafiltration (SE-UF) process. Transglutaminase (TGase)-modified PPI and ChPI were evaluated in comparison to unmodified counterparts and to commercial protein ingredients. Protein denaturation and polymerization were observed in the TG PPI and TG ChPI. In addition, the TGase modification led to the formation of intermolecular β-sheet and β-turn structures that contributed to an increase in high-molecular-weight polymers, which, in turn, significantly improved the gel strength. The TG ChPI had a significantly higher gel strength but a lower emulsification capacity than the TG PPI. These results demonstrated the impact of the inherent differences in the protein fractions on the functional behavior among species. For the first time, the functional behavior of the PPI and ChPI, produced on a pilot scale under mild processing conditions, was comprehensively evaluated as impacted by the TGase-induced structural changes.

Effect of atmospheric cold plasma treatment on acid gelation properties of skim milk: Rheology and textural studies

Cold plasma processing is a non-thermal food processing technique that has been shown to improve the gelling properties of plant proteins by altering their structure through oxidation and crosslinking. This study aimed to investigate the effects of cold plasma treatment on the rheological properties of skim milk under different conditions, focusing on the impact of feed gas and treatment time on skim milk's sulfhydryl content, flow properties, and acid gelling behavior. Results showed that free sulfhydryl content decreased with treatment time, with a notable reduction observed after 2 min of N2-O2 plasma treatment. Skim milk treated with N2 plasma experienced a more gradual decrease in free SH content. Cold plasma increased skim milk viscosity over time. N2-O2 plasma treatment significantly affected G'40 and G'4 storage moduli, with an increase observed after 2 min of exposure but no change beyond that time. Acid gels' greenness (a* value) decreased with increasing treatment time compared to the control. Acid gel firmness of milk treated with N2-O2 plasma for 1 min significantly increased from 1.804 N to 1.912 N, and further to 2.072 N after 2 min of treatment. However, longer exposure times led to lower firmness in gels. N2 plasma treatment also significantly impacted acid gel firmness. Syneresis in acid gels decreased from 63.4 % to 57.7 % and 58.7 % after 1 and 2 min of N2-O2 plasma treatment, respectively, but increased to about 70 % after 4 min. Acid gels made from milk treated with N2 plasma experienced considerably less syneresis. The cold plasma treatment under different conditions significantly affected the properties of skim milk, with various impacts on sulfhydryl content, flow properties, and acid gelling behavior. These findings demonstrate the potential applications of cold plasma processing in the food industry to improve product properties.

Modification of low-salt myofibrillar protein using combined ultrasound pre-treatment and konjac glucomannan for improving gelling properties: Intermolecular interaction and filling effect

The quality deterioration of low-salt meat products has been gained ongoing focus of researchers. In this study, konjac glucomannan (KGM) was used to alleviate the finiteness of ultrasound treatment on the quality improvement of low-salt myofibrillar protein (MP), and the modification sequence was also investigated. The results revealed that the single and double sequential modification by utilizing KGM and ultrasound significantly influenced the gelation behavior of low-salt MPs. The uniform MP-KGM mixture formed by a single ultrasound treatment had limited protein unfolding, resulting in relatively weak intermolecular forces in the composite gel. Importantly, ultrasound pre-treatment combined with KGM modification promoted the unfolding and moderate thermal aggregation of proteins and remarkably improved the rheological behaviors and gel strength of the composite gel. This result could also be corroborated by the highest percentage of trans-gauche-trans conformation of SS bridges and maximum β-sheet proportion. Furthermore, molecular dynamic simulation and molecular docking elucidated that the hydrogen bond length between protein and KGM was shortened after ultrasound pre-treatment, which was the molecular basis for the enhanced intermolecular interactions. Therefore, ultrasound pre-treatment combined with KGM can effectively improve the gelling properties of low-salt MPs, providing a practical method for the processing of low-salt meat products.

Tackling food allergens-The role of food processing on proteins' allergenicity

This chapter examines how innovative and emerging food processing technologies, such as those that use heat, electricity, electromagnetic waves, and pressure, can modify protein denaturation, aggregation, and intermolecular interactions pathways, which can result in varying immunoreactive responses. It emphasizes the need to understand how these processing methods affect the protein epitopes recognized by antibodies and their respective priming pathways, especially during the sensitization stage that precedes an allergic response. Although traditional processing methods have been investigated, the impact of novel technologies on food protein allergenicity remains largely unknown. The chapter specifically focuses on milk proteins, which have clinical significance and are associated with cow's milk allergy, one of the most common food allergies in young children. Additionally, it examines potential scientific advancements that novel processing methods may bring to this field.

Impact of emerging food processing technologies on structural and functional modification of proteins in plant-based meat alternatives: An updated review

In the past decade, the plant-based meat alternative industry has grown rapidly due to consumers' demand for environmental-friendly, nutritious, sustainable and humane choices. Consumers are not only concerned about the positive relationship between food consumption and health, they are also keen on the environmental sustainability. With such increased consumers' demand for meat alternatives, there is an urgent need for identification and modification of protein sources to imitate the functionality, textural, organoleptic and nutritional characteristics of traditional meat products. However, the plant proteins are not readily digestible and require more functionalization and modification are required. Proteins has to be modified to achieve high quality attributes such as solubility, gelling, emulsifying and foaming properties to make them more palatable and digestible. The protein source from the plant source in order to achieve the claims which needs more high protein digestibility and amino acid bioavailability. In order to achieve these newer emerging non-thermal technologies which can operate under mild temperature conditions can reach a balance between feasibility and reduced environmental impact maintaining the nutritional attributes and functional attributes of the proteins. This review article has discussed the mechanism of protein modification and advancements in the application of non-thermal technologies such as high pressure processing and pulsed electric field and emerging oxidation technologies (ultrasound, cold plasma, and ozone) on the structural modification of plant-based meat alternatives to improve, the techno-functional properties and palatability for successful food product development applications.

Technological advances in protein extraction, structure improvement and assembly, digestibility and bioavailability of plant-based foods

Plant-based foods are being considered seriously to replace traditional animal-origin foods for various reasons. It is well known that animals release large amounts of greenhouse gases into the environment during feeding, and eating animal-origin foods may also cause some health problems. Moreover, animal resources will likely be in short supply as the world population grows. It is highly likely that serious health problems ascribed to insufficient protein intake in some areas of the world will occur. Studies have shown that environmentally friendly, abundant, and customizable plant-based foods can be an effective alternative to animal-based foods. However, currently, available plant-based foods lack nutrients unique to animal-based foods. Innovative processing technologies are needed to improve the nutritional value and functionality of plant-based foods and make them acceptable to a wider range of consumers. Therefore, protein extraction technologies (e.g., high-pressure extraction, ultrasound extraction, enzyme extraction, etc.), structure improvement and assembly technologies (3D printing, micro-encapsulation, etc.), and technologies to improve digestibility and utilization of bioactive substances (microbial fermentation, physical, etc.) in the field of plant-based foods processing are reviewed. The challenges of plant-based food processing technologies are summarized. The advanced technologies aim to help the food industry solve production problems using efficient, environmentally friendly, and economical processing technologies and to guide the development of plant-based foods in the future.

Effect of Stir-Frying on Physicochemical and Functional Properties of Oat Protein Isolates

The heat treatment required for the deactivation of enzymes was carried out on crop species such as oats. Stir-frying, a frequently employed method for enzyme inactivation to preserve their desirable shelf life, can result in diminished nutritional value and protein degeneration. The mechanism by which stir-frying affects the oat protein remains largely unknown. Therefore, this study aimed to investigate the physicochemical and functional properties of the extracted oat protein isolates (OPI) at different stir-frying durations (0, 10, 20, and 30 min) at a temperature of 230 °C. The findings of this study demonstrated that stir-frying led to a decrease in the content of amino acids (AA), potentially attributed to the involvement of certain amino acids in the Maillard reaction. As the time of stir-frying increased, the secondary structure of OPI underwent changes: specifically, β-turns transformed into β-sheets. The process of protein denaturation and redistribution of chemical bonds resulted in an increase in the disulfide bond content of OPI, leading to aggregation, large particle size, and reduced digestibility. However, the water retention properties, foaming properties, and emulsification properties of OPI showed improvement. These findings provide valuable insights for the controlled and precise processing of oats and highlight the potential of OPI as a functional food.

Modifications to functional and biological properties of proteins of cowpea pulse crop by ultrasound-assisted extraction

Natural resource depletion, negative environmental effects and the challenge to secure global food security led to the establishment of the Sustainable Development Goals (SDGs). In need to explore underutilized sustainable protein sources, this study aims at isolating protein from cowpea by ultrasound-assisted extraction (UAE), where the techno-functional characteristics of the protein isolates were studied at different sonication conditions i.e., 100 W and 200 W at processing times ranging from 5 to 20 min. The US at 200 W-10 min produced the optimal results for all properties. In this process combination, there was an increase in protein yield, solubility, water-holding capacity, foaming capacity and stability, emulsion activity and stability, zeta-potential, and in-vitro protein digestibility from 31.78% to 58.96%, 57.26% to 68.85%, 3.06 g/g to 3.68 g/g 70.64% to 83.74%, 30.76% to 60.01%, 47.48% to 64.26%, 56.59% to 87.71%, -32.9 mV to -44.2 mV and 88.27% to 89.99%, respectively and particle size dropped from 763 nm to 559 nm in comparison to control. The microstructure and secondary-structure alterations of proteins caused by sonication were validated by SEM images, SDS-PAGE, and FTIR analyses. Sonication leads to acoustic cavitation and penetrate the cell walls, improving extraction from the solid to liquid phase. After sonication, the hydrophobic protein groups were exposed and proteins were partially denatured which increased its functionality. The findings demonstrated that UAE of cowpea protein improved yield, modify characteristics to fit the needs of the food industry, and contribute to achieving SDGs 2, 3, 7, 12, and 13.

Cold plasma as a pre-treatment for processing improvement in food: A review

Thermal processes can be very damaging to the nutritional and sensory quality of foods. Non-thermal technologies have been applied to reduce the impact of heat on food, reducing processing time and increasing its efficiency. Among many non-thermal technologies, cold plasma is an emerging technology with several potential applications in food processing. This technique can be used to preserve and sanitize food products, and act as a pre-treatment for drying, extraction, cooking, curing, and hydrogenation of foods. Furthermore, the reacting plasma species formed during the plasma application can change positively the sensory and nutritional aspects of foods. The aim of this review is to analyze the main findings on the application of cold plasma as a pre-treatment technology to improve food processing. In its current maturity stage, the cold plasma technology is suitable for reducing drying time, increasing extraction efficiency, as well as curing meats. This technology can convert unsaturated into saturated fats, without forming trans isomers, which can be an alternative to healthier foods. Although many advantages come from cold plasma applications, this technology still has several challenges, such as the scaling up, especially in increasing productivity and treating foods with large formats. Optimization and control of the effects of plasma on nutritional and sensory quality are still under investigation. Further improvement of the technology will come with a higher knowledge of the effects of plasma on the different chemical groups present in foods, and with the development of bigger or more powerful plasma systems.

Physical treatment synergized with natural surfactant for improving gas-water interfacial behavior and foam characteristics of α-lactalbumin

The purpose of this study was to investigate effect of physical treatment (ultrasound, U/high pressure homogenization, H/combined treatment, UH or HU) and surfactant (Mogroside V, Mog) on air/water interface adsorption and foaming properties of α-lactalbumin (ALa). Firstly, the binding of Mog and all physical-treated ALa was a static quenching process. Mog had the greatest binding affinity for HU-ALa among all treated samples. U or H treatment could change surface hydrophobicity of ALa/Mog complex. Secondly, at the molar ratio (ALa:Mog) of 1:50, foaming ability (FA) of all ALa samples got the maximum. The sequence of FA in ALa and ALa/Mog complex was listed as follow: HU > U > H > UH. Moreover, foaming stability (FS) of HU-ALa was the highest, followed by H-ALa, U-ALa and UH-ALa. Meanwhile, low concentration Mog increased FS of ALa or UH-ALa, but it reduced FS of H-ALa, U-ALa and HU-ALa. Quartz crystal microbalance with dissipation monitoring (QCM-D) experiment indicated that ALa/Mog complex after U or H treatment was quickly absorbed at air/water interface, compared with the treated ALa, and HU-ALa/Mog had the largest frequency shift. In addition, HU-ALa had the thickest bubble membrane and the highest dissipation shift in all samples, indicating that the absorbed membrane thickness and viscoelasticity of samples was correlated with foam stability. Therefore, U and H treatment synergism with Mog was an effective approach to enhance foam properties of ALa, which indicated that HU-treated ALa/Mog complex could be viewed as the safe and efficient foaming agent applied in food processing.

Tremella fuciform Polysaccharides: Extraction, Physicochemical, and Emulsion Properties at Different pHs

The chemical composition, macromolecular characteristics, and structure of four types of Tremella fuciform polysaccharides (TPS) were analyzed, including one TPS that was extracted in the laboratory (L-TPS) and three commercial TPS. The effects of pH on the properties of TPS emulsions were investigated by analyzing their zeta potential, particle size, apparent viscosity, and stability. The results showed that L-TPS presented a higher percentage content of protein (2.33%) than commercial TPS (0.73–0.87%), and a lower molecular mass (17.54 × 106 g/mol). Thus, L-TPS exhibited the best emulsifying activity but gave poor emulsion stability. The droplet sizes and apparent viscosity of commercial TPS-stabilized emulsions were larger or higher in acidic environments. At pH 2, the apparent viscosity was the lowest for L-TPS. Commercial TPS emulsions were most stable at pH 6, while the L-TPS-stabilized emulsion was most stable at pH 2. The obtained results revealed that the emulsifying properties of TPS varied and the effects of pH on emulsion characteristics differed, as determined from the molecular mass, macromolecular characteristics, and structure. This research is useful for expanding the application of TPS as a novel food ingredient in emulsions.

Developments in Plant Proteins Production for Meat and Fish Analogues

In recent years, there have been significant developments in plant proteins production for meat and fish analogues. Some of the key developments include the use of new plant protein sources such as soy, legumes, grains, potatoes, and seaweed, as well as insect proteins, leaf proteins, mushrooms, and microbial proteins. Furthermore, to improve the technological and functional properties of plant proteins, they can be subjected to traditional and unconventional treatments such as chemical (glycosylation, deamidation, phosphorylation, and acylation), physical (pulsed electric fields, ultrasound, high hydrostatic pressure, dynamic high-pressure treatment, and cold plasma), and biological (fermentation and enzymatic modification). To obtain the high quality and the desired texture of the food product, other ingredients besides proteins, such as water, fat, flavors, binders, dyes, vitamins, minerals, and antioxidants, also have to be used. The final product can be significantly influenced by the matrix composition, variety of ingredients, and water content, with the type of ingredients playing a role in either enhancing or constraining the desired texture of the food. There are several types of technologies used for meat and fish analogues production, including extrusion, shear cell technology, spinning, 3D printing, and others. Overall, the technologies used for meat and fish analogues production are constantly evolving as new innovations are developed and existing methods are improved. These developments have led to the creation of plant-based products that have a similar texture, taste, and nutritional profile to meat and fish, making them more appealing to consumers seeking alternatives to animal-based products.

Consumer Perception and Acceptability of Lupin-Derived Products: A Systematic Review

The addition of lupin into other foods can enhance their nutritional value and may be an acceptable approach to introducing lupin into the food supply, particularly as an ingredient. Lupin could be used in many food products (bakery products, pasta, beverages, meat products and dairy products) to improve their protein content and possible nutraceutical effects. The main aim of this study is to summarise the recent formulation trends with lupin as an ingredient of new food products based on consumer perception and acceptability. The present systematic literature review was conducted through the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. The eligibility criteria for the articles to be considered were: (a) the manufacturing of a food product with lupin as a formulation ingredient; (b) the food product developed was tested by a sensorial panel. A total of 33 studies filled the inclusion criteria and were incorporated into the qualitative synthesis. The sensory analysis of each product was notoriously different based on the jury evaluators and measurement scales used but revealed high acceptability rates for possible future consumers. The high protein and fibre contents of lupin were the most cited reason associated with the importance of nutrient-rich food products for consumers. More research on foods with high nutrition profiles and well-established sustainability parameters is crucial to promote healthier food environments.

Effects of Sequential Enzymolysis and Glycosylation on the Structural Properties and Antioxidant Activity of Soybean Protein Isolate

The effects of limited hydrolysis following glycosylation with dextran on the structural properties and antioxidant activity of the soybean protein isolate (SPI) were investigated. Three SPI hydrolysate (SPIH) fractions, F30 (>30 kDa), F30-10 (10-30 kDa), and F10 (<10 kDa), were confirmed using gel permeation chromatography. The results demonstrated that the glycosylation of F30 was faster than that of F30-10 or F10. The enzymolysis caused the unfolding of the SPI to expose the internal hydrophobic cores, which was further promoted by the grafting of dextran, making the obtained conjugates have a loose spatial structure, strong molecular flexibility, and enhanced thermal stability. The grafting of dextran significantly enhanced the DPPH radical or •OH scavenging activity and the ferrous reducing power of the SPI or SPIH fractions with different change profiles due to their different molecular structures. The limited enzymolysis following glycosylation was proven to be a promising way to obtain SPI-based food ingredients with enhanced functionalities.

Ultrasound-assisted processing: Changes in gel properties, water-holding capacity, and protein aggregation of low-salt Hypophthalmichthys molitrix surimi by soy protein isolate

The effects of ultrasound combined (25 kHz, 400 ± 20 W/L, ultrasonic time of 5, 10 and 15 min) with soy protein isolate processing on gelling properties of low-salt silver carp surimi, aggregation and conformation of myofibrillar protein were investigated. The results revealed that, compared with only adding soy protein isolate components, ultrasound-assisted soy protein isolate had a more obvious effect on the protein structure in low-salt surimi, leading to the decrease in α-helix and total sulfhydryl contents, and the increase in β-sheet content and protein solubility. As a result, more proteins participated in the formation of the gel network, and significant improvements in hardness, gel strength and water-holding capacity of the low-salt surimi gel were observed, while the myosin heavy chain in SDS-PAGE was weakened. The low-field NMR results showed that the initial relaxation time of T₂ was apparently shorter, the free water content decreased and the bound water content increased under the action of ultrasound. Scanning electron microscope observation found that the surimi gel treated by ultrasound exhibited smaller holes, and had a more stable and denser network structure. In conclusion, the results of our work demonstrated that ultrasound combined with soy protein isolate can significantly improve the gel quality properties of low-salt silver carp.

Irradiation impact on biological activities of Anthraquinone pigment produced from Talaromyces purpureogenus and its evaluation, characterization and application in beef burger as natural preservative

BACKGROUND

The demand for natural coloring and preservative agents in food industry is increasing day by day as a result of awareness of the negative health effects of synthetic color preservatives. Consumers want foods with less processing, a longer shelf life, and clear labels that list only natural ingredients and food additives with familiar names that promote good health. In order to meet consumer demands and regain consumers' confidence in the safety of food products, the food industry was compelled to search for natural alternatives with strong antibacterial and antioxidant properties. Therefore, the objective of this study was to produce a microbial pigment that not only serve as food coloring agents but also provide health advantages owing to their bioactivities. Additionally, the potential use of anthraquinone pigment (AQP) as a natural food preservative compared to gamma irradiation was also examined to extend the shelf life of the beef burger and improve its hygienic quality.

RESULTS

This study used Talaromyces purpureogenus AUMC2603 to produce the red natural pigment, which was identified as an anthraquinone pigment (AQP). According to the results, gamma (γ) radiation had no significant effect on AQP's antibacterial properties. However, it has a negative, considerable effect on antioxidant activity, where a large dose of γ-ray may change the antioxidant components and lessen the AQP's capacity to scavenge free radicals. Additionally, the γ ray-treated AQP had a strong cytotoxic activity in relation to a high γ-ray dose. As a result, it is suggested that AQP-containing foods should not be irradiated. The extracted AQP was applied as a food additive to improve the quality and increase the shelf life of beef burgers. Significant antibacterial and antioxidant action has been shown at 2% (w/v) AQP. The findings demonstrated that the treatment of beef burger with AQP decreased the initial total bacterial count and psychrophilic bacteria and extended the shelf-life of beef burger in comparison to the control (beef burger with no addition of AQP, butylated hydroxytoluene (BHT) or gamma radiation treatment). On the other hand, there was no substantial difference in the overall amount of mold and yeast or coliform at zero time. According to sensory characteristics, beef burgers had a shelf life of 6 days for controls and 9, 12, and 15 days for AQP-treated samples at 0.5, 1 and 2%, respectively, compared to γ- irradiated samples, 9 and 21 days, at 3 and 5 Kilo Gray (KGy), respectively.

CONCLUSIONS

This research provides a natural red pigment from Talaromyces purpureogenus with potent biological activities as antimicrobials and antioxidants to be applied as coloring, additive, and preservative agent in the food industry. Also, the tested pigment offers a powerful alternative to gamma irradiation for extending the shelf life of food products.

Improving the Functional Performance of Date Seed Protein Concentrate by High-Intensity Ultrasonic Treatment

Date kernel is a plant-derived byproduct that has the potential to be converted into a high-value-added food ingredient, such as protein concentrate, in the food industry. Ultrasound, which is an alternative method for improving the functional properties of food proteins, is an effective physical treatment for modifying protein functionality. Solubility is the main criterion that primarily affects other functional properties of protein concentrates, such as emulsification, foaming, and water and oil binding. The aim of this study is to enhance the techno-functional performance of date seed protein concentrate (DSPC) by maximizing the solubility via a high-intensity ultrasound (HIUS) treatment at a fixed frequency of 20 kHz. The effect of ultrasonic homogenization under varying amplitudes and times (amplitude of 40, 60, and 80% for 5, 10, and 15 min, respectively) on the functional properties of the DSPC was investigated by using the response surface methodology (RSM). A face-centered central composite design (FC-CCD) revealed that the optimal process conditions of HIUS were at an amplitude of 80% for 15 min. The physicochemical and functional properties of the ultrasound-applied concentrate (DSPC-US) were determined under the optimum HIUS conditions, and then these properties of DSPC-US were compared to the native DSPC. The results showed that the solubility of all DSPC samples treated by HIUS was significantly (p < 0.05) higher than that of the native DSPC. In addition, emulsion activity/stability, foaming activity/stability, and oil-binding capacity increased after HIUS homogenization treatments, whereas the water-binding capacity decreased. These changes in the techno-functional properties of the DSPC-US were explained by the modification to the physicochemical structure of the DSPC (particle size, zeta potential, SDS-PAGE, SEM, FTIR, DSC, free SH content, surface hydrophobicity, and intrinsic emission). This work revealed that HIUS could be an effective treatment for enhancing the functional properties of date seed protein concentrate.

Effect of high hydrostatic pressure processing on the structure, functionality, and nutritional properties of food proteins: A review

Proteins are important food ingredients that possess both functional and nutritional properties. High hydrostatic pressure (HHP) is an emerging nonthermal food processing technology that has been subject to great advancements in the last two decades. It is well established that pressure can induce changes in protein folding and oligomerization, and consequently, HHP has the potential to modify the desired protein properties. In this review article, the research progress over the last 15 years regarding the effect of HHP on protein structures, as well as the applications of HHP in modifying protein functionalities (i.e., solubility, water/oil holding capacity, emulsification, foaming and gelation) and nutritional properties (i.e., digestibility and bioactivity) are systematically discussed. Protein unfolding generally occurs during HHP treatment, which can result in increased conformational flexibility and the exposure of interior residues. Through the optimization of HHP and environmental conditions, a balance in protein hydrophobicity and hydrophilicity may be obtained, and therefore, the desired protein functionality can be improved. Moreover, after HHP treatment, there might be greater accessibility of the interior residues to digestive enzymes or the altered conformation of specific active sites, which may lead to modified nutritional properties. However, the practical applications of HHP in developing functional protein ingredients are underutilized and require more research concerning the impact of other food components or additives during HHP treatment. Furthermore, possible negative impacts on nutritional properties of proteins and other compounds must be also considered.

Nanofibrils of food-grade proteins: Formation mechanism, delivery systems, and application evaluation

Due to the high aspect ratio, appealing mechanical characteristics, and various adjustable functional groups on the surface proteins, food-grade protein nanofibrils have attracted great research interest in the field of food science. Fibrillation, known as a process of peptide self-assembly, is recognized as a common attribute for food-grade proteins. Converting food-grade proteins into nanofibrils is a promising strategy to broaden their functionality and applications, such as improvement of the properties of gelling and emulsifying, especially for constructing various delivery systems for bioactive compounds. Protein source and processing conditions have a great impact on the size, structure, and morphology of nanofibrils, resulting in extreme differences in functionality. With this feature, it is possible to engineer nanofibrils into four different delivery systems, including gels, microcapsules, emulsions, and complexes. Construction of nanofibril-based gels via multiple cross-linking methods can endow gels with special network structures to efficiently capture bioactive compounds and extra mechanical behavior. The adsorption behavior of nanofibrils at the interface is highly complex due to the influence of several intrinsic factors, which makes it challenging to form stabilized nanofibril-based emulsion systems. Based on electrostatic interactions, microcapsules and complexes prepared using nanofibrils and polysaccharides have combined functional properties, resulting in adjustable release behavior and higher encapsulation efficiency. The bioactive compounds delivery system based on nanofibrils is a potential solution to enhance their absorption in the gastrointestinal tract, improve their bioavailability, and deliver them to target organs. Although food-grade protein nanofibrils show unknown toxicity to humans, further research can contribute to broadening the application of nanofibrils in delivery systems.

Strategies to optimize the structural and functional properties of myofibrillar proteins: Physical and biochemical perspectives

Myofibrillar protein (MP), as the main meat protein, have high nutritional value. However, the relatively poor solubility of MP at low ionic strength sometimes limits the utilization of MP to produce products rich in meat protein. Accordingly, appropriate modification of MP is needed to improve their functional properties. In general, MP modification strategies are categorized into biochemical and physical approaches. Different from other available reviews, the review focuses on summarizing the principles and applications of several techniques of physical modification, briefly depicting biochemical modification as a comparison. Modification of MP with a certain intensity of direct current magnetic field, ultrasound, high pressure, microwave, or radio frequency can improve solubility, emulsification, stability, and gel formation. Of these, magnetic field and microwave-modified MP have shown some potential in reducing salt in meat. These physical techniques can also have synergistic effects with other conditions (temperature, pH, physical or chemical techniques) to compensate for the deficiencies of individual treatment techniques. However, these strategies still need further research for practical applications.HIGHLIGHTSThe current status and findings of research on direct current magnetic field in meat processing are presented.Several physical strategies to modify the microstructure and functional properties of MPs.The synergistic effects of these techniques in combination with other methods to modify MPs are discussed.

A review of protein-phenolic acid interaction: reaction mechanisms and applications

Phenolic acids (PA) are types of phytochemicals with health benefits. The interaction between proteins and PAs can cause minor or extensive changes in the structure of proteins and subsequently affect various protein properties. This study investigates the protein/PA (PPA) interaction and its effects on the structural, physicochemical, and functional properties of the system. This work particularly focused on the ability of PAs as a subgroup of phenolic compounds (PC) on the modification of proteins. Different aspects including the influence of structure affinity relationship and molecular weight of PA on the protein interaction have been discussed in this review. The physicochemical properties of PPA change mainly due to the change of hydrophilic/hydrophobic parts and/or the formation of some covalent and non-covalent interactions. Furthermore, PPA interactions affecting functional properties were discussed in separate sections. Due to insufficient studies on the interaction of PPAs, understanding the mechanism and also the type of binding between protein and PA can help to develop a new generation of PPA. These systems seem to have good capabilities in the formulation of low-fat foods like high internal Phase Emulsions, drug delivery systems, hydrogel structures, multifunctional fibers or packaging films, and 3 D printing in the meat processing industry.

Recent advances on the impact of novel non-thermal technologies on structure and functionality of plant proteins: A comprehensive review

The recent trend in consumption of plant-based protein over animal protein opens up a new avenue for sustainable agriculture practice, less environmental impact and greenhouse gas emission. The modification of plant-based proteins by novel non-thermal technologies includes the structural transformation followed by the modulation of their functional properties that are exploited to develop a protein ingredient system for application in food formulation. This review explores the impact of non-thermal process technologies on structural modification of plant proteins followed by improvement in protein's function in food formulation. Novel concepts articulating the impact of non-thermal technologies on structural and functional modification of plant proteins affecting it's digestibility and bioavailability are addressed. Limitations and prospects of applying non-thermal technologies in developing an alternative plant-based protein food system are also summarized. Non-thermal processes are considered as the emerging technologies that results in conformational changes in secondary, tertiary and quaternary structure of plant proteins which helps in modification of functional properties without jeopardizing the organoleptic properties and bioactivity of the protein. However, extensive future study is needed to optimize the non-thermal process parameters along with the finding of new protein sources to achieve healthy and sustainable plant-based food system.

The Effects of Phosphorylation and Microwave Treatment on the Functional Characteristics of Freeze-Dried Egg White Powder

The effects of phosphorylation pre-treatments at 1.5, 2.5, and 3.5% levels, as well as microwave application at 200, 400, and 700 watts levels for 2 min, on the functional parameters of egg white powder obtained by the freeze dryer procedure were investigated. P1.5-M200 had the highest oil-holding capacity, emulsion stability, and emulsion activity, while P2.5-M200 had the highest foam capacity. The P2.5-M400 had the largest particle size, and P3.5-M200 had the highest degree of phosphorylation and protein solubility. On the other hand, P3.5-M200 had the highest solution viscosity by 1% (w/v), water-holding capacity, and foam stability, in the treatments that used phosphorylation and microwave treatment simultaneously. FTIR spectroscopy of the unfolding structure of egg white protein revealed changes in the protein’s secondary structure, such as the development of β-sheets and β-turns, as well as the binding of negatively charged phosphate groups on the serine, threonine, and tyrosine side chains. The phosphorylation and microwave treatments reduced the particle size of the egg white protein powder while increasing the surface area of the protein molecules, according to SEM analyses.

Effects of ultrasonic treatment on ovomucin: Structure, functional properties and bioactivity

The effects of ultrasonic treatment on the structure, functional properties and bioactivity of Ovomucin (OVM) were investigated in this study. Ultrasonic treatment could significantly enhance OVM solubility without destroying protein molecules. The secondary structure changes, including β-sheet reduction and random coil increase, indicate more disorder in OVM structure. After ultrasonic treatment, the OVM molecule was unfolded partially, resulting in the exposure of hydrophobic regions. The changes in OVM molecules led to an increase in intrinsic fluorescence and surface hydrophobicity. By detecting the particle size of protein solution, it was confirmed that ultrasonic treatment disassembled the OVM aggregations causing a smaller particle size. Field emission scanning electron microscopy (FE-SEM) images showed that ultrasonic cavitation significantly reduced the tendency of OVM to form stacked lamellar structure. Those changes in structure resulted in the improvement of foaming, emulsification and antioxidant capacity of OVM. Meanwhile, the detection results of ELISA showed that ultrasonic treatment did not change the biological activity of OVM. These results suggested that the relatively gentle ultrasound treatment could be utilized as a potential approach to modify OVM for property improvement.

The Current Situation of Pea Protein and Its Application in the Food Industry

Pea (Pisum sativum) is an important source of nutritional components and is rich in protein, starch, and fiber. Pea protein is considered a high-quality protein and a functional ingredient in the global industry due to its low allergenicity, high protein content, availability, affordability, and deriving from a sustainable crop. Moreover, pea protein has excellent functional properties such as solubility, water, and oil holding capacity, emulsion ability, gelation, and viscosity. Therefore, these functional properties make pea protein a promising ingredient in the food industry. Furthermore, several extraction techniques are used to obtain pea protein isolate and concentrate, including dry fractionation, wet fractionation, salt extraction, and mild fractionation methods. Dry fractionation is chemical-free, has no loss of native functionality, no water use, and is cost-effective, but the protein purity is comparatively low compared to wet extraction. Pea protein can be used as a food emulsifier, encapsulating material, a biodegradable natural polymer, and also in cereals, bakery, dairy, and meat products. Therefore, in this review, we detail the key properties related to extraction techniques, chemistry, and structure, functional properties, and modification techniques, along with their suitable application and health attributes.