A novel magnetic β-cyclodextrin modified graphene oxide adsorbent with high recognition capability for 5 plant growth regulators

Regulating the defects of MIL-101(Cr) for the efficient and simultaneous determination of eleven plant growth regulators in fresh fruit juice

This work presents an efficient sorbent for plant growth regulators (PGRs) by regulating the defects of a metal-organic framework MIL-101(Cr). Using the regulated MIL-101(Cr), we developed a simple and effective method for the simultaneous determination of eleven PGRs in fresh fruit juice. The extraction conditions were optimized by an orthogonal array design. Under optimal conditions, the method showed a satisfactory limit of detection (0.1-1.2 ng/g), recovery rates (83.4-110.2 %), and precision (2.9-18.0 % for intra-day and 2.7-10.8 % for inter-day), as well as a greatly suppressed matrix effect. Notably, regulating the defects significantly enhanced the desorption of PGRs on MIL-101(Cr). The sorbent didn't need to be destroyed to release the adsorbed PGRs and could be reused at least 6 times. Furthermore, the defects of MIL-101(Cr) and interactions between the sorbent and PGRs were studied by TGA, ATR-IR, XPS, NH3-TPD and UV-Vis DRS.

Preparation of amphiphilic poly(divinylbenzene-co-N-vinylpyrrolidone)-functionalized polydopamine magnetic nanoadsorbents for enrichment of synthetic cannabinoids in wastewater

Concerns have been raised about synthetic cannabinoids (SCs), which are among the most often trafficked and used illegal substances. An analytical method that holds promise for determining illicit drug use in the general population is wastewater-based epidemiology (WBE). Unfortunately, the concentration of SCs in wastewater is often extremely low on account of their hydrophobic nature, thus presenting a significant obstacle to the accurate detection and quantification of SCs using WBE. In this study, we present novel magnetic nanomaterials as amphiphilic adsorbents for pretreatment of wastewater using magnetic solid phase extraction (MSPE). Polydopamine-modified Fe3O4 nanoparticles were used as the magnetic core and further functionalized with poly(divinylbenzene-N-vinylpyrrolidone). Coupled with UHPLC-MS/MS analysis, an analytical method to simultaneously detect nine SCs at trace-levels in wastewater was developed and validated, enriching 50 mL wastewater to 100 μL with limits of detection (LOD) being 0.005-0.5 ng L-1, limits of quantification (LOQ) being 0.01-1.0 ng L-1, recoveries ranging from 73.99 to 110.72%, and the intra- and inter-day precision's relative standard deviations less than 15%. In comparison to the time-consuming conventional column-based solid phase extraction, the entire MSPE procedure from sample pre-treatment to data acquisition could be finished in one hour, thus largely facilitating the WBE method for drug surveillance and control.

Determination of chloropropanol esters and glycidyl esters in instant noodles based on solid-phase microextraction with chitosan-β-cyclodextrin coated fiber

We developed a method for the determination of chloropropanol esters and glycidyl esters (GE) in instant noodles using solid-phase microextraction with chitosan-β-cyclodextrin (CS-β-CD) coated fiber coupled with gas chromatography-tandem mass spectrometry. The developed low-cost fiber coating can improve the sensitivity of the method. Immobilized enzymes can improve operational stability and reusability compared to free enzymes, thereby reducing costs. The adsorption isotherm was modeled using the Langmuir model, while the adsorption kinetics followed the pseudo second-order model. The limit of detection was 0.3 ng/L. The method exhibited satisfactory recoveries for the analytes, ranging from 80.2 % to 105.3 %, with relative standard deviations < 9.9 %. Furthermore, the results of the exposure assessment showed that chloropropanol esters do not pose unacceptable risks to different age groups. However, the margin of exposure for GE suggested a potential health risk for populations between the ages of 3 and 12 years old.

Studies on the Removal of Malachite Green from Its Aqueous Solution Using Water-Insoluble β-Cyclodextrin Polymers

The rising global pollution of natural waters by dyes has brought to light the need for adaptable and efficient removal techniques. To create water-insoluble β-cyclodextrin (β-CD) polymers like CA/-CD, TA/-CD, and MA/-CD, several organic acids including citric acid (CA), tartaric acid (TA), and malic acid (MA) were cross-linked with β-cyclodextrin in this study. The obtained polymers were characterized by different advanced analytical techniques such as FTIR, SEM, and UV-vis spectrophotometry. Malachite green dye was removed from aqueous solutions using the synthesized polymers by adsorption. The adsorption investigation was conducted under several conditions, including pH, adsorbent mass, dye concentration, temperature, contact time, adsorption isotherm, and kinetics. The adsorbent CA/β-CD shows the highest adsorption of MG dye in all of the conditions because it contains a high number of carboxyl groups. The negatively charged carboxyl ions of CA/β-CD attract the positively charged MG dye electrostatically and remove MG from aqueous media with an efficiency of 91%. As a result, the findings indicated that water-insoluble polymers based on β-cyclodextrin are well-suited as inexpensive adsorbents to remove colors from aqueous media.

Novel ferrofluid based on water-based deep eutectic solvents: application in dispersive liquid-liquid microextraction of naphthalene-derived plant growth regulators in edible oil

A new ferrofluid extractant (Fe3O4 @SiO2-WDES) was ingeniously prepared by coating magnetic Fe3O4 @SiO2 microspheres with water-based deep eutectic solvent (WDES) and used for dispersive liquid-liquid microextraction (DLLME) and HPLC determination of naphthalene-derived plant growth regulators (PGRs, i.e., 1-naphthylacetic acid, 2-naphthylacetic acid, 1-naphthoxy acetic acid, 2-naphthyloxyacetic acid and 1-naphthylacetamide) in edible oil. Herein, mass transfer of the analytes in DLLME was significantly enhanced via increasing the contact surface by employing the microspheres as the supporter and dispersant of WDES, and phase separation can be efficiently achieved using an external magnet rather than centrifugation in traditional DLLME. Response surface methodology (RSM) based on Box-Behnken design (BBD) was employed for the optimization of core experimental conditions, and Analytical Eco-Scale and Analytical GREEnness Metric Approaches were adopted to evaluate the degree of greenness of the procedure. Under the optimal conditions, satisfactory performances of linearity ranged from 5 to 100 μg/L (R2 ≥ 0.9982), limit of detection (0.58-0.91 μg/L), limit of quantitation (1.9-3.0 μg/L), precision (RSDs ≤ 5.5%), recovery (81.3%-108.1%) and negligible matrix effect were achieved, which introduced a promising alternative route for the determination of naphthalene-derived plant growth regulators in edible oil.

β-cyclodextrin polymer composites for the removal of pharmaceutical substances, endocrine disruptor chemicals, and dyes from aqueous solution- A review of recent trends

Cyclodextrin (CD) and its derivatives are receiving attention as a new-generation adsorbent for water pollution treatment due to their external hydrophilic and internal hydrophobic properties. Among types of CD, β-Cyclodextrin (βCD) has been a material of choice with a proven track record for a range of utilities in distinct domains, owing to its unique cage-like structural conformations and inclusion complex-forming ability, especially to mitigate emerging contaminants (ECs). This article outlines βCD composites in developing approaches of their melds and composites for purposes such as membranes for removal of the ECs in aqueous setups have been explored with emphasis on recent trends. Electrospinning has bestowed an entirely different viewpoint on polymeric materials, comprising βCD, in the framework of diverse functions across a multitude of niches. Besides, this article especially discusses βCD polymer composite membrane-based removal of contaminants such as pharmaceutical substances, endocrine disruptors chemicals, and dyes. Finally, in this article, the challenges and future directions of βCD-based adsorbents are discussed, which may shed light on pragmatic commercial applications of βCD polymer composite membranes.

Surveying the elimination of hazardous heavy metal from the multi-component systems using various sorbents: a review

In this review, several adsorbents were studied for the elimination of heavy metal ions from multi-component wastewaters. These utilized sorbents are mineral materials, microbes, waste materials, and polymers. It was attempted to probe the structure and chemistry characteristics such as surface morphology, main functional groups, participated elements, surface area, and the adsorbent charges by SEM, FTIR, EDX, and BET tests. The uptake efficiency for metal ions, reusability studies, isotherm models, and kinetic relations for recognizing the adsorbent potentials. Besides, the influential factors such as acidity, initial concentration, time, and heat degree were investigated for selecting the optimum operating conditions in each of the adsorbents. According to the results, polymers especially chitosan, have displayed a higher adsorption capacity relative to the other common adsorbents owing to the excellent surface area and more functional groups such as amine, hydroxyl, and carboxyl species. The high surface area generates the possible active sites for trapping the particles, and the more effective functional groups can complex more metal ions from the polluted water. Also, it was observed that the uptake capacity of each metal ion in the multi-component solutions was different because the ionic radii of each metal ion were different, which influence the competition of metal ions for filling the active sites. Finally, the reusability of the polymers was suitable, because they can use several cycles which proves the economic aspect of the polymers as the adsorbent.

Nanotechnological Interventions in Agriculture

Agriculture is an important sector that plays an important role in providing food to both humans and animals. In addition, this sector plays an important role in the world economy. Changes in climatic conditions and biotic and abiotic stresses cause significant damage to agricultural production around the world. Therefore, the development of sustainable agricultural techniques is becoming increasingly important keeping in view the growing population and its demands. Nanotechnology provides important tools to different industrial sectors, and nowadays, the use of nanotechnology is focused on achieving a sustainable agricultural system. Great attention has been given to the development and optimization of nanomaterials and their application in the agriculture sector to improve plant growth and development, plant health and protection and overall performance in terms of morphological and physiological activities. The present communication provides up-to-date information on nanotechnological interventions in the agriculture sector. The present review deals with nanoparticles, their types and the role of nanotechnology in plant growth, development, pathogen detection and crop protection, its role in the delivery of genetic material, plant growth regulators and agrochemicals and its role in genetic engineering. Moreover, the role of nanotechnology in stress management is also discussed. Our aim in this review is to aid researchers to learn quickly how to use plant nanotechnology for improving agricultural production.

Recent Advancements in Cyclodextrin-Based Adsorbents for the Removal of Hazardous Pollutants from Waters

Water is an essential substance for the survival on Earth of all living organisms. However, population growth has disturbed the natural phenomenon of living, due to industrial growth to meet ever expanding demands, and, hence, an exponential increase in environmental pollution has been reported in the last few decades. Moreover, water pollution has drawn major attention for its adverse effects on human health and the ecosystem. Various techniques have been used to treat wastewater, including biofiltration, activated sludge, membrane filtration, active oxidation process and adsorption. Among the mentioned, the last method is becoming very popular. Moreover, among the sorbents, those based on cyclodextrin have gained worldwide attention due to their excellent properties. This review article overviewed recent contributions related to the synthesis of Cyclodextrin (CD)-based adsorbents to treat wastewater, and their applications, especially for the removal of heavy metals, dyes, and organic pollutants (pharmaceuticals and endocrine disruptor chemicals). Furthermore, new adsorption trends and trials related to CD-based materials are also discussed regarding their regenerative potential. Finally, this review could be an inspiration for new research and could also anticipate future directions and challenges associated with CD-based adsorbents.

Green Extraction Techniques as Advanced Sample Preparation Approaches in Biological, Food, and Environmental Matrices: A Review

Green extraction techniques (GreETs) emerged in the last decade as greener and sustainable alternatives to classical sample preparation procedures aiming to improve the selectivity and sensitivity of analytical methods, simultaneously reducing the deleterious side effects of classical extraction techniques (CETs) for both the operator and the environment. The implementation of improved processes that overcome the main constraints of classical methods in terms of efficiency and ability to minimize or eliminate the use and generation of harmful substances will promote more efficient use of energy and resources in close association with the principles supporting the concept of green chemistry. The current review aims to update the state of the art of some cutting-edge GreETs developed and implemented in recent years focusing on the improvement of the main analytical features, practical aspects, and relevant applications in the biological, food, and environmental fields. Approaches to improve and accelerate the extraction efficiency and to lower solvent consumption, including sorbent-based techniques, such as solid-phase microextraction (SPME) and fabric-phase sorbent extraction (FPSE), and solvent-based techniques (μQuEChERS; micro quick, easy, cheap, effective, rugged, and safe), ultrasound-assisted extraction (UAE), and microwave-assisted extraction (MAE), in addition to supercritical fluid extraction (SFE) and pressurized solvent extraction (PSE), are highlighted.

Nanomaterials and nanotechnology for the delivery of agrochemicals: strategies towards sustainable agriculture

Nanomaterials (NMs) have received considerable attention in the field of agrochemicals due to their special properties, such as small particle size, surface structure, solubility and chemical composition. The application of NMs and nanotechnology in agrochemicals dramatically overcomes the defects of conventional agrochemicals, including low bioavailability, easy photolysis, and organic solvent pollution, etc. In this review, we describe advances in the application of NMs in chemical pesticides and fertilizers, which are the two earliest and most researched areas of NMs in agrochemicals. Besides, this article concerns with the new applications of NMs in other agrochemicals, such as bio-pesticides, nucleic acid pesticides, plant growth regulators (PGRs), and pheromone. We also discuss challenges and the industrialization trend of NMs in the field of agrochemicals. Constructing nano-agrochemical delivery system via NMs and nanotechnology facilitates the improvement of the stability and dispersion of active ingredients, promotes the precise delivery of agrochemicals, reduces residual pollution and decreases labor cost in different application scenarios, which is potential to maintain the sustainability of agricultural systems and improve food security by increasing the efficacy of agricultural inputs.

Phosphate-crosslinked β-cyclodextrin polymer for highly efficient removal of Pb(ii) from acidic wastewater

Novel phosphate-crosslinked β-cyclodextrin polymer was synthesized for highly efficient Pb(ii) removal from acidic wastewater.

A review on remediation technologies using functionalized Cyclodextrin

Modern lifestyle and alleviated anthropogenic activities have increased the pollutant load, ultimately causing stress on the environment. In industrialization, many harmful compounds are released into the environment polluting air, water, and soil, triggering adverse impacts on the ecosystem and human beings. Therefore, the development of advanced remediation technologies turns out as a significant environmental priority. Less polar cyclic oligosaccharide Cyclodextrin (CD) with cavity binding organic compounds attracted attention by helping effectively as environmental application. The formation of inclusion complexes and modified Cyclodextrin by cross-linking or surface modification enhances their capacity to abate pollutant effectively from the environment. Modification results in the formation of several novel materials such as CD-based composites, nanocomposites, crosslinked polymer or hydrogels, potent cross-linkers, CD-based membranes, and CD immobilized supports. Several environmental remediation technologies based on Cyclodextrin and modified Cyclodextrin have been discussed in detail in this review. Various environmental applications of Cyclodextrin and its derivatives have been discussed, along with their formation, properties, and characterization. Effective removal of organic pollutants, inorganic pollutants, micropollutants, volatile compounds etc., has been explained using several remediation technologies. Based on CD innocuity, this is referred to as the green process. The reversible equilibrium corresponded by the inclusion phenomenon sets a significant trend in the field of CD environmental application to develop techniques by incorporating supramolecular chemistry as well as irreversible methods such as biodegradation and advanced oxidation. It helps in the complete removal of pollutants and ultimately recycling the CD.

Pyridine ionic liquid functionalized bimetallic MOF solid-phase extraction coupled with high performance liquid chromatography for separation/analysis sunset yellow

An effective method based on the pyridine ionic liquid functionalized bimetallic MOF solid-phase extractant (Cu/Co-MOF@[PrPy][Br]) coupled with high performance liquid chromatography (HPLC) for the separation/analysis sunset yellow was established. Cu/Co-MOF@[PrPy][Br] was characterized by FTIR, XRD, SEM and TEM. Several important factors, such as pH, amount of extractant, extract time, and types of eluents were investigated in detail. Under the optimal conditions, linear range of the method was 0.05–40.00 μg mL⁻¹, the detection limit was 0.02 μg mL⁻¹, and the linear correlation was good (R² = 0.9992). The analysis of sunset yellow in soda, effervescent tablet and jelly proved that the method was simple and effective.

An effective method based on the pyridine ionic liquid functionalized bimetallic MOF solid-phase extractant (Cu/Co-MOF@[PrPy][Br]) coupled with high performance liquid chromatography (HPLC) for the separation/analysis sunset yellow was established.

Highly sensitive fluorescent sensing platform for imidacloprid and thiamethoxam by aggregation-induced emission of the Zr(Ⅳ) metal - organic framework

A novel luminescent UiO-66-NH₂ (UN) demonstrated great potentials to sense imidacloprid (IM) and thiamethoxam (TH) pesticides with high sensitivity and desirable selectivity. The UN exhibits superb luminescence emission properties, which have been found to enhance the aggregation-induced emission (AIE) of IM and TH. The enhanced AIE of IM and TH on UN has been applied for the sensitive sensing of IM and TH, and a limit of detection (LOD) of IM was estimated to be 5.57 μg/L. LOD of TH was found to be 0.98 μg/L, respectively. Interestingly, the other neonicotinoid pesticides showed a low interference response in recognition of IM and TH. More importantly, we have further demonstrated that the UN are successfully used to sense IM and TH in real samples of fruit juice with a high recovery of 85-116%, and relative standard deviation (RSD) were from 3.42% to 16.07%.

[Novel adsorption material for solid phase extraction in sample pretreatment of plant hormones]

植物激素在植物生长过程中具有重要作用,调节植物生长、发育及抗逆的各个过程。植物激素超微精准定量分析一直是植物生理学研究的瓶颈问题。植物激素的准确、高效检测目前大多是基于液相色谱-串联质谱联用技术。样品前处理是植物激素色谱-质谱分析中必不可少的一个步骤,直接影响后续检测方法的灵敏度和准确性。在植物激素各种前处理方法中,固相萃取(SPE)技术应用非常广泛。在萃取小柱基础上发展了多种新形式(分散固相萃取、磁性固相萃取、固相微萃取等,称之为SPE相关方法)。在上述SPE相关方法中,吸附材料的选择均是关键因素,决定了样品前处理过程的目标物提取、净化和富集效果。碳基材料(包括碳纳米管、石墨烯、碳氮化合物等)和有机骨架材料(包括金属有机骨架、共价有机材料)拥有结构可设计、比表面积大、稳定性良好等特性,非常适合作为吸附材料。分子印迹聚合物和超分子化合物依靠主-客体特异性分子识别作用,能显著提高样品前处理方法的选择性。本文重点针对植物激素样品前处理中的SPE技术,综述了近5年来上述几类功能化吸附材料的最新应用进展,并对其发展趋势进行展望。

Combination of pipette tip solid phase extraction and high performance liquid chromatography for determination of plant growth regulators in food samples based on the electrospun covalent organic framework/polyacrylonitrile nanofiber as highly efficient sorbent

Facile and sensitive determination of plant growth regulators (PGRs) in food samples is important but still remains great challenge. Herein, a pipette tip solid phase extraction (PT-SPE) method was developed for fast and sensitively detecting PGRs. The PT-SPE adsorbent was prepared by integrating a novel covalent organic framework (COF) of schiff base network 3 (SNW-3) and polyacrylonitrile (PAN) through electrospinning. The SNW-3 can easily adsorb PGRs with high special affinity through electrovalent bands between the ammonium ions of SNW-3 and the carboxy groups of PGRs. The polymer of PAN acts as scaffold material for SNW-3, which can lower seepage pressure hence accelerates adsorption/desorption kinetics. By combination with HPLC-DAD, a satisfactory method was successfully developed for simultaneous determination of ten PGRs in watermelon. Good analytical performances were achieved with this proposed method, including good linearity (5-500 ng/mL) with high correlation coefficients (R ≥ 0.9981), low limits of detection (S/N = 3, 0.24-3.19 ng/mL) and limits of quantification (S/N = 10, 1.65-5.72 ng/mL), satisfactory precision (intra-day RSDs ≤ 2.7%, inter-day RSDs ≤ 3.7%), and high accuracy (recovery: 82.8-113.0%). The method developed in this study shows high potential for design of high target-affinity adsorbents for food sample preparing.

Magnetic dispersive solid-phase extraction of triazole and triazine pesticides from vegetable samples using a hydrophilic-lipophilic sorbent based on maltodextrin- and β-cyclodextrin-functionalized graphene oxide

Maltodextrin- and β-cyclodextrin-functionalized magnetic graphene oxide (mGO/β-CD/MD), a novel hydrophilic-lipophilic composite, was successfully fabricated and used for the co-extraction of triazines and triazoles from vegetable samples before HPLC-UV analysis. mGO/β-CD/MD was synthesized by chemical bonding of β-CD and MD to the surface of mGO, using epichlorohydrin (ECH) as a linker. The successful synthesis of mGO/β-CD/MD was confirmed by characterization tests, including attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), vibrating sample magnetometry (VSM), thermogravimetric analysis (TGA), energy-dispersive X-ray spectroscopy (EDX), Brunauer-Emmett-Teller (BET), and Barrett-Joyner-Halenda (BJH) analyses. The hydrophobic cavity of β-CD and a large number of hydroxyl groups on the MD structure contributed to the co-extraction of mentioned pesticides with a wide range of polarity. Under the optimized condition (sorbent amount, 30 mg; desorption time, 10 min; desorption solvent volume, 300 μL; desorption solvent, methanol/acetonitrile (1:1) containing 5% (v/v) acetic acid; extraction time, 20 min; and pH of sample solution, 7.0), good linearity within the range 1.0-1000 μg L^-1 (r² ≥ 0.992) was achieved. Extraction efficiencies were in the range 66.4-95.3%, and the limits of detection were 0.01-0.08 μg L^-1. Relative recoveries for spiked samples were obtained in the range 88.4-112.0%, indicating that the matrix effect was insignificant, and good precisions (intra- and inter-day) were also achieved (RSDs < 9.0%, n = 3). The results confirmed that the developed method was efficient for the determination  of trace amounts of pesticides in potato, tomato, and corn samples.

[Recent developments of pesticide adsorbents based on cyclodextrins]

The invention and application of pesticides have greatly increased the yield of crops, greatly contributing to ensuring people's basic livelihoods and gradually improving their livelihoods to a well-off level. However, foods, water sources, and soil, containing high levels of pesticide residues, result in increasingly serious pollution. Pesticide residues usually have the characteristics of micro toxicity, difficult biodegradation, and bioaccumulation, and thus pose serious threat to living organisms and ecosystems. In recent years, pesticide pollution has earned worldwide focus. Thus, methods for the efficient detection of trace pesticides and reduction of the harm caused by pesticide pollution are urgently required. Researchers have used catalysis, electrochemistry, membrane separation, adsorption, and other methods to enrich pesticides from complex matrices. Among these, adsorbents have attracted much attention owing to their advantages of simple operation steps, rapid treatment process, and low amounts of organic solvents required. Research on adsorption materials has always been a very active field, and is also the key to the success of separation and enrichment of pesticides from complex matrices. Development of adsorbents with the advantages of simple synthesis, environment-friendliness, high stability, and strong reusability is of great significance. There has been some progress in the field of pesticide adsorption using supramolecular compounds. Cyclodextrin is a macrocyclic compound with a cavity after crown ether, which can form inclusion complexes via host guest interactions as the main body. Cyclodextrin can also be modified by etherification, esterification, oxidation, and other chemical reactions to improve its adsorption performance. Pesticides can be classified into organic and inorganic substances. One of the most widely used inorganic fungicides is the Bordeaux solution, whose main component is Cu²⁺. Organic fungicides, insecticides, herbicides, and plant growth regulators are basically organic molecules, whose hydroxyl and carboxyl groups can form complexes with Cu²⁺. As a matrix, cyclodextrin not only increases the surface area of the materials, but also provides the binding sites of hydroxyl and carboxyl groups, which guarantees efficient enrichment of Cu²⁺. Organic pesticides with high polarity, high electron density, and strong hydrophobicity could be better adsorbed. In this paper, the application of cyclodextrin-based adsorbents in pesticide adsorption was reviewed, and on this basis, reference to future development directions and application prospects were provided. The adsorption capacity of individual pesticide adsorbents based on cyclodextrin, as reviewed in this paper, is not high enough. Therefore, improving the adsorption capacity is currently a major research target. Some of the above-mentioned adsorbents have unclear degradation mechanisms and can easily cause secondary pollution. Therefore, the development of environment-friendly pesticide adsorbents that are easy to regenerate is a promising research direction for the future. After adsorption, some detection methods are used to determine whether the pesticide residues are up to the standard; however, the detection instruments are expensive. Therefore, the development of a combined detection mechanism that can reduce workload and cost is a promising research direction. Finally, the development of smart cyclodextrin-based adsorbents is also an efficient and rapid method to reduce the cost of detecting residual pesticide concentrations and the risk of pesticide pollution. For example, intelligent materials, whose color changes can be observed by the naked eye, not only adsorb pesticides, but also respond according to the concentration of residual pesticides.

Fabrication and Adsorption Optimization of Novel Magnetic Core-shell Chitosan/Graphene Oxide/β-cyclodextrin Composite Materials for Bisphenols in Aqueous Solutions

A novel magnetic composite material, Fe3O4@SiO2/chitosan/graphene oxide/β-cyclodextrin (MCGC), was prepared by multi-step methods. Various methods were used to systematically characterize the morphology, composition, structure, and magnetic properties of MCGC. The results obtained show that the composite material has good morphology and crystal structure and can be separated quickly by an external magnetic field. The operation is relatively easy, and the raw materials used to prepare this material are economical, easy to obtain, and environmentally friendly. The performance and adsorption mechanism for using this material as an adsorbent to remove bisphenol A (BPA) and bisphenol F (BPF) from water were studied. The adsorption parameters were optimized. Under optimal conditions, MCGC was found to remove more than 90% of BPA and BPF in a mixed solution (20 mg/L, 50 mL); the adsorption process for BPA and BPF on MCGC was found to follow a Redlich-Peterson isotherm model and Pseudo-second-order kinetic model. The adsorption mechanism for MCGC may involve a combination of various forces. Recycling experiments showed that after five uses, MCGC retained a more than 80% removal effect for BPA and BPF, and through real sample verification, MCGC can be used for wastewater treatment. Therefore, MCGC is economical, environmentally friendly, and easy to separate and collect, and has suitable stability and broad application prospects.

Zirconium(Ⅳ)-based metal-organic framework for determination of imidacloprid and thiamethoxam pesticides from fruits by UPLC-MS/MS

Zirconium(Ⅳ)-based metal-organic framework (MOF)-UiO-66-NH₂ was fabricated to adsorb the imidacloprid and thiamethoxam in fruit samples before analysis using UPLC-MS/MS. The UiO-66-NH₂ was confirmed by SEM, FTIR, and XRD. Key experimental parameters were investigated by response surface methodology (RSM). The desirability recovery of imidacloprid was 94.52% under optimum conditions (mount of adsorbent = 52.48 mg, volume of eluent = 5.18 mL, pH = 9, extraction time = 15 min). The desirability recovery of thiamethoxam was 93.57% under optimum conditions (mount of adsorbent = 50.58 mg, volume of eluent = 2.6 mL, pH = 5.65, extraction time = 11.94 min). Under the optimal conditions, the actual recovery of imidacloprid and thiamethoxam was 92.39% and 94.37%, respectively. Besides, the method was applied successfully to detect imidacloprid and thiamethoxam in different fruit samples. The results demonstrated that the UiO-66-NH₂ is an excellent adsorbent for the extraction imidacloprid and thiamethoxam from fruit samples.

Facile extraction and determination of organophosphorus pesticides in vegetables via magnetic functionalized covalent organic framework nanocomposites

Facile enrichment and determination of trace organophosphorus pesticides (OPPs) in foods has been a constantly pursuing goal in food safety field. Herein, Zr⁴⁺-immobilized covalent organic frameworks (Fe₃O₄@COF@Zr⁴⁺) have been first constructed and utilized as the powerful adsorbents for magnetic solid-phase extraction (MSPE) of OPPs. Owing to the π-π stacking interaction, hydrogen bonding and Zr⁴⁺-phosphate coordination reaction, the composites exhibited excellent selectivity and superior affinity to OPPs. Under optimized conditions, the proposed MSPE method coupled with GC-FPD showed good linearity (R² ≥ 0.9990) and yielded low limits of detection (0.7-3.0 μg kg^-1) for OPPs. Moreover, the developed method was successfully employed for the quantitation of OPPs in spiked vegetable samples and obtained satisfactory recoveries in the range of 87-121% with the relative standard deviations (RSDs) ≤ 8.9%. These results demonstrated that the prepared nanoparticles hold unique advantages for trace OPPs analysis in foodstuffs.

The fabrication of a thiol-modified chitosan magnetic graphene oxide nanocomposite and its adsorption performance towards the illegal drug clenbuterol in pork samples

A novel thiol (provided by (3-mercaptopropyl) trimethoxysilane, MPTS)-modified chitosan magnetic graphene oxide nanocomposite (Fe₃O₄@SiO₂/GO/CS/MPTS) was synthesized and characterized for the first time as an efficient magnetic sorbent for the enrichment and extraction of trace levels of clenbuterol in pork samples (muscle, fat, heart and liver). Various greatly influential parameters were optimized using a Box-Behnken design (BBD) through the response surface methodology (RSM) to obtain more satisfactory recovery. Under optimum conditions, the method detection limits (MDLs) were in the range of 0.054-0.136 ng g^-1. The recoveries of three spiked levels ranged from 84.7% to 101.1%, and the relative standard deviations (RSDs) were lower than 9.3%. The results of the adsorption experiments showed that the maximum adsorption capacity of Fe₃O₄@SiO₂/GO/CS/MPTS for clenbuterol was 214.13 mg g^-1. The adsorption process was most consistent with pseudo second-order kinetics and Langmuir adsorption isotherm, indicating a homogeneous process with a chemisorptive nature. Also, the nanocomposite exhibited high adsorption capability for clenbuterol compared with Fe₃O₄@SiO₂/GO and Fe₃O₄@SiO₂/GO/CS. In addition, regeneration of the nanocomposite was effectively achieved, and it retained about 82% of its initial capacity after four cycles. All these results indicate that the synthetic nanocomposite is a promising efficient adsorbent for the adsorption of clenbuterol with high adsorption capacity and low cost.

Development, validation, comparison, and implementation of a highly efficient and effective method using magnetic solid-phase extraction with hydrophilic-lipophilic-balanced materials for LC-MS/MS analysis of pesticides in seawater

To achieve multi-pesticides residue analysis in seawater, hydrophilic-lipophilic-balanced magnetic particles were designed and fabricated by swelling polymerization of divinyl benzene (DVB) and N-vinyl pyrrolidone (NVP) on the surface of Fe₃O₄@SiO₂ magnetic particles. The ratio of DVB to NVP was adjusted to achieve a proper balance in hydrophilicity and lipophilicity. The obtained magnetic particles were systematically characterized by TEM, SEM, FT-IR and vibrating sample magnetization. Based on the optimized magnetic nanoparticles, a sensitive magnetic solid-phase extraction method was developed for the simultaneous pre-concentration and determination of 96-pesticide residues from large-volume seawater samples prior to being detected by liquid chromatography-tandem mass spectrometry. Recoveries of pesticides in spiked seawater samples (0.001, 0.01, 0.1, 1.0 μg L^-1) ranged from 62% to 112% with RSDs less than 21%. The method limits of detection of 96 pesticides ranged from 0.13 to 0.42 ng L^-1, the method limits of quantification of 96 pesticides ranged from 1.0 to 10 ng L^-1. The method was successfully applied to pesticide residue analysis in water samples from Jiulong River Estuary of China, demonstrating the prospects of this technique as a potential method for the rapid determination of trace levels of multi-pesticide residues in seawater.

Novel cyclodextrin-based adsorbents for removing pollutants from wastewater: A critical review

Over the past few decades, cyclodextrin-based adsorbents have drawn worldwide attention as new-generation adsorbents for wastewater treatment due to its extraordinary physicochemical properties. This review outlined the recent development in the synthesis of cyclodextrin-based adsorbents as well as highlighted their applications in the removal of heavy metals, dyes, endocrine disrupting chemicals (EDCs), and mixed pollutants from water. The cross-linked and immobilized cyclodextrin-based adsorbents exhibited excellent adsorption performances. The removal of dyes and heavy metals were effectively controlled by ion exchanging, mainly depending upon the pH; while the adsorptions of EDCs always occurred in cyclodextrin cavities and pH-independent. An easier separation process between aqueous and adsorbents could be achieved compared to native cyclodextrin, which promoted the application of cyclodextrin-based adsorbents in practical industry. This review could provide an inspiration for the advanced study in the development of cyclodextrin-based adsorbents for high efficiency wastewater treatment.

A novel Fe3O4/graphene oxide/citrus peel-derived bio-char based nanocomposite with enhanced adsorption affinity and sensitivity of ciprofloxacin and sparfloxacin

To create more active adsorption sites on biochar, the Fe₃O₄/GO/citrus peel-derived magnetic bio-nanocomposite (mGOCP) with hierarchically porous architectures was synthesized by a facile one-pot hydrothermal approach for efficient removal of fluoroquinolone antibiotics ciprofloxacin (CIP) and sparfloxacin (SPA). The characterization analysis of bio-nanocomposites showed that the incorporation of GO could ensure relatively higher surface area (1556 cm² g^-1), more abundant pore structure, and higher thermal stability within mGOCP bio-nanocomposites than Fe₃O₄/citrus peel-derived magnetic bio-nanocomposites (mCP). And the mGOCP-1% attained outstanding adsorption capacity for CIP (283.44 mg g^-1) and SPA (502.37 mg g^-1), respectively. The primary adsorption mechanisms for CIP and SPA included π-π electron donor-acceptor interaction, H-bonding, hydrophobic interaction and electrostatic interaction. Overall, the surface morphology and structural composition of biochars could be regulated with GO to facilitate the adsorption capacity. Moreover, the developed mGOCP could be extended as a potential adsorbent for removal of other emerging organic pollutants in water.

A high efficient adsorbent for plant growth regulators based on ionic liquid and β-cyclodextrin functionalized magnetic graphene oxide

Four types of ionic liquids which composed of cation with imidazole ring and anion with benzene, naphthalene, anthraquinone and naphthoquinone ring were prepared and named VOIm⁺BenSO₃^-, VOIm⁺NapSO₃^-, VOIm⁺AQSO₃^- and VOIm⁺NQSO₃^-, respectively. Then, ionic liquids and β-cyclodextrin functionalized magnetic graphene oxide materials were firstly synthesized for the extraction of 23 plant growth regulators in vegetable samples. The synthesized materials anticipated the unique properties of ionic liquids, β-cyclodextrin, graphene oxide and Fe₃O₄@SiO₂, including high surface area, high supramolecular recognition capability, superparamagnetism and large delocalized π-electron system, which were successfully characterized. Among four kinds of ionic liquids functionalized adsorbents, the VOIm⁺AQSO₃^- modified material exhibited high adsorption capability to 7 plant growth regulators compared with Fe₃O₄@SiO₂/GO/β-CD, Fe₃O₄@SiO₂/GO and other three types of ionic liquids based adsorbents. Parameters that could affect the recoveries of 7 plant growth regulators were investigated, such as mass ratio of Fe₃O₄@SiO₂/GO/β-CD to ionic liquids, salt concentration, pH, amount of adsorbent, extraction time and desorption solvent. Under the optimal condition, the magnetic solid phase extraction method using VOIm⁺AQSO₃^- and β-cyclodextrin functionalized magnetic graphene oxide material (Fe₃O₄@SiO₂/GO/β-CD/IL) as adsorbent was developed and coupled with ultra-high performance liquid chromatography-triple quadrupole linear ion trap mass spectrometry for the determination of 7 plant growth regulators in vegetable samples. Validation results showed that the limit of detection and limit of quantitation were in the range of 0.01-0.18 μg/kg and 0.03-0.58 μg/kg, respectively. The satisfactory linearities were acquired in the concentration of 2-50 μg/kg with the correlation coefficients higher than 0.9982. Taken together, the synthesized Fe₃O₄@SiO₂/GO/β-CD/IL was a highly effective magnetic solid phase extraction adsorbent for the enrichment of trace level of plant growth regulators in vegetable samples.

Electrostatically in situ binding of zwitterionic glycine on the surface of MGO for determination of nitrite in various real samples

Zwitterionic dispersive magnetic solid phase extraction (ZI-DMSPE) was developed through in situ binding of glycine on the magnetic graphene oxide, electrostatically. This highly selective sorbent was applied for the determination and preconcentration of trace levels of nitrite in soil, sausage, water samples (tap, mineral, and rain), and vegetables (potato, onion, spinach, radish, and lettuce) prior to its determination by UV-Vis spectrophotometry. The major advantage of the method is the analyte adsorption in both acidic and basic media. The sorbent was characterized by SEM, XRD, EDS, and FT-IR. Several parameters affecting ZI-DMSPE were optimized. Under the optimal conditions, LOD and RSD were obtained 17 ng L^-1 and 1.3% respectively. Preconcentration factor and sorption capacity of the proposed method were 666 and 238 mg g^-1 respectively. Accuracy was assessed by comparing results with those obtained by direct determination using ion chromatography and spiked real samples.

Determination of three tetracyclines in bovine milk using magnetic solid phase extraction in tandem with dispersive liquid-liquid microextraction coupled with HPLC

A novel analytical method namely magnetic solid phase extraction in tandem with dispersive liquid-liquid microextraction was developed and used for the extraction/preconcentration of tetracycline (TCN), oxytetracycline (OTC) and doxycycline (DC) from bovine milk sample before HPLC-UV analysis. The β-cyclodextrin functionalized silica-coated magnetic graphene oxide (Fe₃O₄@SiO₂@GO-β-CD) was used as an adsorbent. The adsorbent was fully characterized using FT-IR, SEM, EDX and Zeta potential techniques. The effective parameters on the performance of the method such as extraction solvent type and volume, adsorbent amount, desorption solvent type and volume, disperser solvent type, desorption time, ionic strength and pH value were investigated. The limit of detection (LOD) and limit of quantification (LOQ) were obtained in the ranges of 1.8-2.9 μg L^-1 and 6.1-9.7 μg L^-1, respectively. The linearity was in the range of 10.0-200.0 μg L^-1 with satisfactory determination coefficients (R²) higher than 0.9929 and a good precision (RSD < 8.8%). The recovery percentages for the analytes in real samples (bovine milk and water) were achieved in a range from 70.6 to 121.5%.

Adsorption behavior and mechanism of β-cyclodextrin–styrene-based polymer for cationic dyes

These figures show that the cyclodextrin polymer was synthesized successfully and possessed good thermal stability.