Monitoring zearalenone in corn flour utilizing novel self-enhanced electrochemiluminescence aptasensor based on NGQDs-NH2-Ru@SiO2 luminophore

Rapid, on-site quantitative determination of mycotoxins in grains using a multiple time-resolved fluorescent microsphere immunochromatographic test strip

The label probe plays a crucial role in enhancing the sensitivity of lateral flow immunoassays. However, conventional fluorescent microspheres (FMs) have limitations due to their short fluorescence lifetime, susceptibility to background fluorescence interference, and inability to facilitate multi-component detection. In this study, carboxylate-modified Eu(III)-chelate-doped polystyrene nanobeads were employed as label probes to construct a multiple time-resolved fluorescent microsphere-based immunochromatographic test strip (TRFM-ICTS). This novel TRFM-ICTS facilitated rapid on-site quantitative detection of three mycotoxins in grains: Aflatoxin B1 (AFB1), Zearalenone (ZEN), and Deoxynivalenol (DON). The limit of detection (LOD) for AFB1, ZEN, and DON were found to be 0.03 ng/g, 0.11 ng/g, and 0.81 ng/g, respectively. Furthermore, the TRFM-ICTS demonstrated a wide detection range for AFB1 (0.05-8.1 ng/g), ZEN (0.125-25 ng/g), and DON (1.0-234 ng/g), while maintaining excellent selectivity. Notably, the test strip exhibited remarkable stability, retaining its detection capability even after storage at 4 °C for over one year. Importantly, the detection of these mycotoxins relied solely on simple manual operations, and with a portable reader, on-site detection could be accomplished within 20 min. This TRFM-ICTS presents a promising solution for sensitive on-site mycotoxin detection, suitable for practical application in various settings due to its sensitivity, accuracy, simplicity, and portability.

Detection of zearalenone in miscellaneous beans by functionalized SERS sensor based on sea urchin aptamer

In this work, a sea urchin gold nanoparticles-zearalenone aptamer- tetramethylrhodamine sensor was constructed. Sea urchin gold nanoparticles, prepared using the seed-mediated growth method, were used as Raman substrates. Nucleic acid aptamers were mainly used as specific recognition molecules. Zearalenone detection in miscellaneous beans was accomplished using the principle of conformational change in aptamer. In addition, we evaluated the linear range, sensitivity, and selectivity of our sensor. We observed that at the displacement of 814 cm-1, for Zearalenone concentrations of 0.01-60 ng/mL, the Raman signal intensity linearly correlated with the zearalenone concentration, with a limit of detection of 0.01 ng/mL, and recoveries of 91.7% to 108.3%. The optimum detection time was 30 min. Thus, our sensor exhibited great potential in zearalenone detection in food products.

A novel self-enhanced ECL-RET aptasensor based on the bimetallic MOFs with homogeneous catalytic sites for kanamycin detection

The inappropriate use of antibiotics undoubtedly poses a potential threat to public health, creating an increasing need to develop highly sensitive tests. In this study, we designed a new type of porphyrin metal-organic frameworks (Fe TCPP(Zn) MOFs) with homogeneous catalytic sites. The ferric-based metal ligands of Fe TCPP(Zn) MOFs acted as co-reaction accelerators, which effectively improved the conversion efficiency of H2O2 on the surface of MOFs, then increased the concentration of •OH surrounding porphyrin molecules to achieve self-enhanced electrochemiluminescence (ECL). Based on this, an aptasensor for the specific detection of kanamycin (KAN) in food and environmental water samples was constructed in combination with resonance energy transform (RET), in which Fe TCPP(Zn) MOFs were used as luminescence donor and AuNPs were used as acceptor. Under the best conditions, there was a good linear relationship between the ECL intensity and the logarithm of KAN concentration with a detection limit of 0.28 fM in the range of 1.0 × 10-7-1.0 × 10-13 M, demonstrating satisfactory selectivity and stability. At the same time, the complexity of the detection environment was reduced, which further realized the reliable analysis of KAN in milk, honey and pond water. Overall, this innovative self-enhanced ECL strategy provides a novel approach for constructing efficient ECL systems in MOFs, and also extends the application of MOFs to the analysis and detection of trace antibiotics in food and the environment.

Ternary electrochemiluminescence quenching effects of CuFe2O4@PDA-MB towards self-enhanced Ru(dcbpy)32+ functionalized 2D metal-organic layer and application in carcinoembryonic antigen immunosensing

BACKGROUND

Carcinoembryonic antigen (CEA) is a significant glycosylated protein, and the unusual expression of CEA in human serum is used as a tumor marker in the clinical diagnosis of many cancers. Although scientists have reported many ways to detect CEA in recent years, such as electrochemistry, photoelectrochemistry, and fluorescence, their operation is complex and sensitivity is average. Therefore, finding a convenient method to accurately detect CEA is significance for the prevention of malignant tumors. With high sensitivity, quick reaction, and low background, electrochemiluminescence (ECL) has emerged as an essential method for the detection of tumor markers in blood.

RESULTS

In this work, a "signal on-off" ECL immunosensor for sensitive analysis of CEA ground on the ternary extinction effects of CuFe2O4@PDA-MB towards a self-enhanced Ru(dcbpy)32+ functionalized metal-organic layer [(Hf)MOL-Ru-PEI-Pd] was prepared. The high ECL efficiency of (Hf)MOL-Ru-PEI-Pd originated from the dual intramolecular self-catalysis, including intramolecular co-reaction between polyethylenimine (PEI) and Ru(dcbpy)32+. At the same time, loading Pd NPs onto (Hf)MOL-Ru-PEI could not only improve the electron transfer ability of (Hf)MOL-Ru-PEI, but also provide more active sites for the reaction of Ru(dcbpy)32+ and PEI. In the presence of CEA, CuFe2O4@PDA-MB-Ab2 efficiently quenches the excited states of (Hf)MOL-Ru-PEI-Pd by PDA, Cu2+, and methylene blue (MB) via energy and electron transfer, leading to an ECL signal decrease. Under optimal conditions, the proposed CEA sensing strategy showed satisfactory properties ranging from 0.1 pg mL-1 to 100 ng mL-1 with a detection limit of 20 fg mL-1.

SIGNIFICANCE

The (Hf)MOL-Ru-PEI-Pd and CuFe2O4@PDA-MB were prepared in this work might open up innovative directions to synthesize luminescence-functionalized MOLs and effective quencher. Besides, the ECL quenching mechanism of Ru(dcbpy)32+ by MB was successfully explained by the inner filter effect (ECL-IFE). At last, the proposed immunosensor exhibits excellent repeatability, stability, and selectivity, and may provide an attractive way for CEA and other disease markers determination.

Carboxyl groups on carbon nanodots as co-reactant sites for anodic electrochemiluminescence of tris(2,2-bipyridine)ruthenium(II)

Carbon nanodots (C-dots) with good biocompatibility have been extensively utilized as co-reactants for electrochemiluminescence (ECL) of the tris(2,2'-bipyridine)ruthenium(II) (Ru(bpy)32+) system. However, the ECL intensity of this system is still relatively low and the mechanism of C-dots as co-reactants remains unclear, which greatly limits its further application in bio-analysis. In this work, we revealed that the carboxyl groups on C-dots are co-reactant sites for Ru(bpy)32+ ECL by systematically investigating the contribution of carboxyl, hydroxyl and carbonyl groups on the surface of C-dots to the ECL intensity. Further treatment with hydrogen peroxide to increase the carboxyl-group content on C-dots resulted in a 10-fold increase in ECL intensity over the original Ru(bpy)32+/C-dots system. This work provides new insights for the rational design of ECL systems with C-dots as co-reactants and offers new chances for further applications of C-dots in the field of ECL.

Dual-layers Raman reporter-tagged Au@Ag combined with core-satellite assemblies for SERS detection of Zearalenone

Zearalenone (ZEN) is a prevalent mycotoxin identified in corn. A SERS-based immunosensor by constructing core-satellite assemblies was developed for ZEN detection. ZEN monoclonal antibody modified gold nanostars (AuNSs) were fabricated as the capture probe (core). The Raman signal probes (satellites) utilized ZEN antigen linked to the core-shell structures loaded with two layers of Raman reporter molecules (AuMBA@AgMBANPs). The coupling between AuNSs and AuMBA@AgMBANPs can produce a poweful electromagnetic field, thus considerably amplifying the Raman signal. The detection range of ZEN for corn samples under the optimal conditions was 5 ∼ 400 μg/kg with a LOD of 3 μg/kg, which completely satisfying the requirement of maximum residual level (60 μg/kg). Moreover, the proposed SERS method was consistent with the HPLC-FLD method for the detection of ZEN in naturally contaminated corn samples (90.58% ∼ 105.29%). Conclusively, fabricated immunosensor with exceptional sensitivity and specificity broaden the application of SERS in mycotoxin detection.

Disposable nanosensor for the electrochemical determination of the interaction between DNA, and a mycotoxin, patulin

Silicon dioxide nanoparticles were synthesized and disposable screen-printed electrodes were modified with these nanoparticles to electrochemically detect the interaction between DNA and patulin, a mycotoxin. Firstly, the synthesized silicon dioxide nanoparticles were chemically characterized by X-ray diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR). Microscopic characterization of the nanoparticles was performed by Transmission Electron Microscopy (TEM) and Energy-dispersive X-ray spectroscopy (EDX). The surface of the silicon dioxide nanoparticle-modified screen-printed electrode was characterized by Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM). SiNP modification resulted in a 2-fold increase in surface area and a 2.3-fold enhancement in the signal. The detection limit (LOD) for the electrochemical patulin determination was calculated as 1.15 µg/mL, and the linear concentration range was found to be 3.2-20 µg/mL. The mode of interaction between patulin and dsDNA was determined through a molecular docking study. After the interaction between patulin and dsDNA, approximately 86 % and 23 % decreases were observed in patulin and guanine oxidation signals, respectively. The S % value for patulin was calculated by utilizing the decrease in the guanine signal after the interaction.

A self-enhanced electrochemiluminescence array chip for portable label-free detection of SARS-CoV-2 nucleocapsid protein with smartphone

SARS-CoV-2 antigen detection plays a key role in the rapid diagnosis of COVID-19. However, current clinically used immunoassays are often limited by assay throughput, sensitivity, accuracy, and field operating conditions. To address these challenges, we constructed a self-enhanced electrochemiluminescence (ECL) array chip (SE2AC) for highly sensitive and label-free detection of SARS-CoV-2 nucleocapsid protein (N protein) with a facile and portable assay setup. Firstly, the self-enhanced ECL nanomaterials with inherent film-forming properties were synthesized by co-doping Ru(bpy)32+ and polyethyleneimine (PEI) in silica nanoparticles (Ru/PEI@SiO2). Secondly, a resistance-induced potential difference-based single-electrode electrochemical system (SEES) was adapted to serve as the electrode array to facilitate one-step assembly without the need for chip alignment. Thirdly, the chip electrode array was functionalized with the synthesized self-enhanced ECL emitters and captured antibodies. In addition, a portable detection box equipped with a smartphone was 3D-printed to serve as the chip holder and "dark room" for imaging acquisition. The SE2AC performance was validated with N protein with a limit of detection (LOD) of 0.47 pg/mL in the range of 1-10,000 pg/mL. Furthermore, the chip successfully detected the viral antigen residue as low as 1.92 pg/mL from diluted rehabilitation patients' serum samples. This is the first study reporting label-free detection of SARS-Cov-2 N protein based on a self-enhanced ECL immunosensor, which provides a novel facile method for highly sensitive diagnosis of COVID-19 with high throughput, portability, and low cost.

Novel Ultralow-Potential Electrochemiluminescence Aptasensor for the Highly Sensitive Detection of Zearalenone Using a Resonance Energy Transfer System

An ultralow-potential electrochemiluminescence (ECL) aptasensor has been designed for zearalenone (ZEN) assay based on a resonance energy transfer (RET) system with SnS2 QDs/g-C3N4 as a novel luminophore and CuO/NH2-UiO-66 as a dual-quencher. SnS2 QDs were loaded onto g-C3N4 nanosheets and enhanced the ECL luminescence via strong synergistic effects under an ultralow potential. The UV-vis absorption spectrum of CuO/NH2-UiO-66 exhibits considerable overlap with the ECL emission spectrum of SnS2 QDs/g-C3N4, an important consideration for the RET process. In order to stimulate RET, the ZEN aptamer and complementary DNA are introduced for conjugation between the donor and the acceptor. With the binding interaction between ZEN by its aptamer, CuO/NH2-UiO-66 is removed from the electrode surface, resulting in the inhibition of the RET system and an increase in the ECL signal. Under optimal conditions, the as-prepared aptasensor quantified ZEN from 0.5 μg·mL-1 to 0.1 fg·mL-1 with a low limit of detection of 0.085 fg·mL-1, and it exhibited good stability, excellent specificity, high reproducibility, and desirable practicality. The sensing strategy provides a method for mycotoxins assay to monitor food safety.

An "on-off-on" electrochemiluminescence aptasensor based on a self-enhanced luminophore for ochratoxin A detection

A highly selective and sensitive "on-off-on" electrochemiluminescence (ECL) aptasensor based on a self-enhanced luminophore was developed for the detection of ochratoxin A (OTA). Specifically, polyethyleneimine functionalized multi-walled carbon nanotubes decorated with gold nanoparticles (AuNPs-PEI-MWCNTs) were used as the electrode matrix to accelerate electron transfer and provide a favorable microenvironment for self-enhanced luminophore loading and ECL signal enhancement. In addition, black phosphorus quantum dots (BPQDs) were used as co-reactants of the ECL reagent tris (2,2'-bipyridyl) ruthenium(II) (Ru(bpy)32+) in ECL experiments, and the reaction mechanism was investigated. The self-enhanced luminophore Ru@SiO2-BPQDs was obtained by encapsulating Ru(bpy)32+ in silica (SiO2) nanoparticles and then combining it with BPQDs through electrostatic interaction. In conventional ECL systems, the emitter and its co-reactants reacted via the inter-nanoparticle pathway, leading to long distance electron transfer. However, the electron transfer distance in the self-enhanced luminophore was significantly shortened due to the intra-nanoparticle electron transfer pathway because BPQDs and oxidized Ru(bpy)32+ were bound within one nanoparticle, thereby improving ECL efficiency to achieve the first "switch-on" state. Then, the luminophore was quenched using ferrocenes (Fc) modified on an aptamer to achieve the "switch-off" state. Finally, OTA was specifically identified by the adapter, causing Fc to be released from the sensor interface, restoring the ECL intensity to achieve the second "switch-on" state. Under optimal conditions, the aptasensor exhibited good sensitivity, stability, and reproducibility, with a linear detection range from 0.1 to 320 ng/mL and a detection limit of 0.03 ng/mL. The novel ECL aptasensor provided a common analytical tool for the detection of mycotoxins and other small molecules.

Electrochemical Determination of Hazardous Herbicide Diuron Using MWCNTs-CS@NGQDs Composite-Modified Glassy Carbon Electrodes

Diuron (DU) abuse in weed removal and shipping pollution prevention always leads to pesticide residues and poses a risk to human health. In the current research, an innovative electrochemical sensor for DU detection was created using a glassy carbon electrode (GCE) that had been modified with chitosan-encapsulated multi-walled carbon nanotubes (MWCNTs-CS) combined with nitrogen-doped graphene quantum dots (NGQDs). The NGQDs were prepared by high-temperature pyrolysis, and the MWCNTs-CS@NGQDs composite was further prepared by ultrasonic assembly. TEM, UV-Vis, and zeta potential tests were performed to investigate the morphology and properties of MWCNTs-CS@NGQDs. CV and EIS measurements revealed that the assembly of MWCNTs and CS improved the electron transfer ability and effective active area of MWCNTs. Moreover, the introduction of NGQDs further enhanced the detection sensitivity of the designed sensor. The MWCNTs-CS@NGQDs/GCE electrochemical sensor exhibited a wide linear range (0.08~12 μg mL-1), a low limit of detection (0.04 μg mL-1), and high sensitivity (31.62 μA (μg mL-1)-1 cm-2) for DU detection. Furthermore, the sensor demonstrated good anti-interference performance, reproducibility, and stability. This approach has been effectively employed to determine DU in actual samples, with recovery ranges of 99.4~104% in river water and 90.0~94.6% in soil. The developed electrochemical sensor is a useful tool to detect DU, which is expected to provide a convenient and easy analytical technique for the determination of various bioactive species.

Advances in aptamers, and application of mycotoxins detection: A review

Mycotoxin contamination in food products can easily cause serious health hazards and economic losses to human beings. How to accurately detect and effectively control mycotoxin contamination has become a global concern. Mycotoxins conventional detection techniques e.g; ELISA, HPLC, have limitations like, low sensitivity, high cost and time-consuming. Aptamer-based biosensing technology has the advantages of high sensitivity, high specificity, wide linear range, high feasibility, and non-destructiveness, which overcomes the shortcomings of conventional analysis techniques. This review summarizes the sequences of mycotoxin aptamers that have been reported so far. Based on the application of four classic POST-SELEX strategies, it also discusses the bioinformatics-assisted POST-SELEX technology in obtaining optimal aptamers. Furthermore, trends in the study of aptamer sequences and their binding mechanisms to targets is also discussed. The latest examples of aptasensor detection of mycotoxins are classified and summarized in detail. Newly developed dual-signal detection, dual-channel detection, multi-target detection and some types of single-signal detection combined with unique strategies or novel materials in recent years are focused. Finally, the challenges and prospects of aptamer sensors in the detection of mycotoxins are discussed. The development of aptamer biosensing technology provides a new approach with multiple advantages for on-site detection of mycotoxins. Although aptamer biosensing shows great development potential, still some challenges and difficulties are there in practical applications. Future research need high focus on the practical applications of aptasensors and the development of convenient and highly automated aptamers. This may lead to the transition of aptamer biosensing technology from laboratory to commercialization.

An ultrasensitive ratiometric aptasensor based on the dual-potential electrochemiluminescence of Ru(bpy)32+ in a novel ternary system for detection of Patulin in fruit products

To sensitively monitor trace-level of toxic patulin (PAT), an ultrasensitive PAT ratiometric aptasensor based on the dual-potential electrochemiluminescence (ECL) of Ru(bpy)₃²⁺ was first proposed. Noteworthily, Ru(bpy)₃²⁺-doped trimetallic nanocube (Ru@Tri) innovatively integrated the luminophore and cathode coreaction accelerator (CCA), which could generate strong cathodic ECL in the existence of low concentration of K₂S₂O₈. Simultaneously, anthocyanin-derived carbon quantum dots (anth-CQDs) prepared from purple potato skins was first served as a green anodic coreactant. And SiO₂-coated anth-CQDs (anth-CQDs@SiO₂) exhibited excellent performance for enhancing anodic ECL of Ru@Tri. Based on this, a novel ternary ECL system was established. In the presence of PAT, the ECL intensity ratio of anode to cathode (I_ECL-A/I_ECL-C) was significantly increased, and a low detection limit of 0.05 pg mL^-1 was obtained. Moreover, when proposed method and high performance liquid chromatography (HPLC) were simultaneously applied to series of fruit products, the obtained results were completely consistent, reflecting its practicability.

An improved up-conversion nanoparticles-based immunochromatographic assay for rapid detection of zearalenone in cereals

A novel improved up-conversion nanoparticles-based immunochromatographic assay (IUCNPs-ICA) was developed for the detection of zearalenone (ZEN). Lu³⁺-doped UCNPs were synthesized using the solvothermal method, and the UCNPs doped with 30 % Lu³⁺ displayed optimal optical properties. The IUCNPs-ICA was subsequently developed for the detection of ZEN in cereals under optimized conditions. The detection time and limit of detection (LOD) were 10 min and 0.1 μg/L, respectively. Moreover, a good linear relationship was observed from 0 to 100 μg/L ZEN (r² = 0.9946) and high specificity for other mycotoxins. LODs in spiked maize and wheat reached 0.16 μg/kg, and recovery rates were 82.11-100.76 % and 79.64-98.51 %. There was good consistency between the results of IUCNPs-ICA, colloidal gold-ICA, and high-performance liquid chromatography (HPLC) in the detection of natural cereal samples. The collective results support the utility of IUCNPs-ICA as a reliable on-site screening method for ZEN residue analysis in various cereals.

Newly Developed Electrochemiluminescence Based on Bipolar Electrochemistry for Multiplex Biosensing Applications: A Consolidated Review

Recently, there has been an upsurge in the extent to which electrochemiluminescence (ECL) working in synergy with bipolar electrochemistry (BPE) is being applied in simple biosensing devices, especially in a clinical setup. The key objective of this particular write-up is to present a consolidated review of ECL-BPE, providing a three-dimensional perspective incorporating its strengths, weaknesses, limitations, and potential applications as a biosensing technique. The review encapsulates critical insights into the latest and novel developments in the field of ECL-BPE, including innovative electrode designs and newly developed, novel luminophores and co-reactants employed in ECL-BPE systems, along with challenges, such as optimization of the interelectrode distance, electrode miniaturization and electrode surface modification for enhancing sensitivity and selectivity. Moreover, this consolidated review will provide an overview of the latest, novel applications and advances made in this field with a bias toward multiplex biosensing based on the past five years of research. The studies reviewed herein, indicate that the technology is rapidly advancing at an outstanding purse and has an immense potential to revolutionize the general field of biosensing. This perspective aims to stimulate innovative ideas and inspire researchers alike to incorporate some elements of ECL-BPE into their studies, thereby steering this field into previously unexplored domains that may lead to unexpected, interesting discoveries. For instance, the application of ECL-BPE in other challenging and complex sample matrices such as hair for bioanalytical purposes is currently an unexplored area. Of great significance, a substantial fraction of the content in this review article is based on content from research articles published between the years 2018 and 2023.

Recent Advances in Electrochemiluminescence Biosensors for Mycotoxin Assay

Rapid and efficient detection of mycotoxins is of great significance in the field of food safety. In this review, several traditional and commercial detection methods are introduced, such as high-performance liquid chromatography (HPLC), liquid chromatography/mass spectrometry (LC/MS), enzyme-linked immunosorbent assay (ELISA), test strips, etc. Electrochemiluminescence (ECL) biosensors have the advantages of high sensitivity and specificity. The use of ECL biosensors for mycotoxins detection has attracted great attention. According to the recognition mechanisms, ECL biosensors are mainly divided into antibody-based, aptamer-based, and molecular imprinting techniques. In this review, we focus on the recent effects towards the designation of diverse ECL biosensors in mycotoxins assay, mainly including their amplification strategies and working mechanism.

Novel insights into versatile nanomaterials integrated bioreceptors toward zearalenone ultrasensitive discrimination

Detrimental contamination of zearalenone (ZEN) in crops and foodstuffs has drawn intensive public attention since it poses an ongoing threat to global food security and human health. Highly sensitive and rapid response ZEN trace analysis suitable for complex matrices at different processing stages is an indispensable part of food production. Conventional detection methods for ZEN encounter many deficiencies and demerits such as sophisticated equipment and heavy labor intensity. Alternatively, the nanomaterial-based biosensors featured with high sensitivity, portability, and miniaturization are springing up and emerging as superb substitutes to monitor ZEN in recent years. Herein, we predominantly devoted to overview the progress in the fabrication strategies and applications of various nanomaterial-based biosensors, highlighting rationales on sensing mechanisms, response types, and practical analytical performance. Synchronously, the versatile nanomaterials integrating with diverse recognition elements for augmenting sensing capabilities are emphasized. Finally, critical challenges and perspectives to expedite ZEN detection are outlooked.

Molecular imprinting electrochemiluminescence sensor based on nitrogen-doped carbon quantum dots /Ru(bpy)3@SiO2 for the determination of citrinin

An electrochemiluminescence (ECL) sensor based on molecular imprinting polymer and SiO₂ nanoparticles loaded Ru(bpy)₃ and nitrogen-doped carbon quantum dots (NCQDs) is constructed for citrinin detection. The Ru(bpy)₃ acts as ECL emitter, and the NCQDs cooperate with tri-n-propylamine (TPA) in solution as a coreactant to facilitate the luminescence. The citrinin imprinted poly(p-aminothiophenol) film is deposited on the surface of the luminophore by electrochemical method, which can immobilize the luminophore besides recognizing the target. The obtained ECL sensor exhibits high sensitivity, stability, and reproducibility. The change of ECL intensity and the logarithm of citrinin concentration display a good linear relationship in the range 1.0 to 100 pg mL^-1, and the detection limit is 5 fg mL^-1. When it is applied to the detection of citrinin contents in food sample (i.e., rice and millet) solutions, the RSD is less than 6.1%, and the recoveries for spiked standards range from 95.5 to 102.0%. Hence, this work provides a promising alternative for citrinin detection.

Roles of MXenes in biomedical applications: recent developments and prospects

....With the development of nanomedical technology, the application of various novel nanomaterials in the biomedical field has been greatly developed in recent years. MXenes, which are new inorganic nanomaterials with ultrathin atomic thickness, consist of layered transition metal carbides and nitrides or carbonitrides and have the general structural formula M_n+1X_nT_x (n = 1-3). Based on the unique structural features of MXenes, such as ultrathin atomic thickness and high specific surface area, and their excellent physicochemical properties, such as high photothermal conversion efficiency and antibacterial properties, MXenes have been widely applied in the biomedical field. This review systematically summarizes the application of MXene-based materials in biomedicine. The first section is a brief summary of their synthesis methods and surface modification strategies, which is followed by a focused overview and analysis of MXenes applications in biosensors, diagnosis, therapy, antibacterial agents, and implants, among other areas. We also review two popular research areas: wearable devices and immunotherapy. Finally, the difficulties and research progress in the clinical translation of MXene-based materials in biomedical applications are briefly discussed.

Dual-quenching effects of methylene blue on the luminophore and co-reactant: Application for electrochemiluminescent-electrochemical ratiometric zearalenone detection

Methylene blue (MB) is a common multifunctional indicator, which can be applied as a quencher for electrochemiluminescence (ECL) analysis as well as a classical redox probe. Although it is relatively prevalent for MB to study the mechanism with Ru-based luminophores in ECL systems, there are few studies on the effects between MB and co-reactants. In this work, we proposed the first investigation of MB on the luminophore and co-reactant of the self-enhanced ECL composites (nitrogen-doped graphene quantum dots on Ru(bpy)₃²⁺-doped silica nanoparticles, NGQDs-Ru@SiO₂), respectively. The relatively narrow ECL spectrum of luminophore (Ru@SiO₂) and the suitable ultraviolet-visible absorption spectrum of MB led to the ECL resonance energy transfer between them, meanwhile the appropriate energy levels among them facilitated the electron transfer, resulting in a decreased ECL signal (quench mode I). Additionally, the co-reactant (NGQDs) was prone to π-π conjugation with MB due to its abundant π-electrons, which reduced the concentration of NGQDs' intermediates and triggered a weakened ECL signal (quench mode II). Therefore, the dual-quenching effects are ingeniously integrated and designed in one ECL-electrochemical (ECL-EC) ratiometric aptasensor for zearalenone detection, for demonstrating its efficacy in enhancing the sensitivity, which is 4.8-fold higher than Ru@SiO₂ alone. This innovative ratiometric aptasensor achieved a relatively wide linear range from 1.0 × 10^-15 to 5.0 × 10^-8 g mL^-1, and obtained a low detection limit of 8.5 × 10^-16 g mL^-1. Our proposed dual-quenching interactions between MB and NGQDs-Ru@SiO₂ will open a new prospective for ECL-EC ratiometric aptasensor, which further broaden the application in sensitive and precise analysis of mycotoxins.

Nanomaterials-Based Electrochemiluminescence Biosensors for Food Analysis: Recent Developments and Future Directions

Developing robust and sensitive food safety detection methods is important for human health. Electrochemiluminescence (ECL) is a powerful analytical technique for complete separation of input source (electricity) and output signal (light), thereby significantly reducing background ECL signal. ECL biosensors have attracted considerable attention owing to their high sensitivity and wide dynamic range in food safety detection. In this review, we introduce the principles of ECL biosensors and common ECL luminophores, as well as the latest applications of ECL biosensors in food analysis. Further, novel nanomaterial assembly strategies have been progressively incorporated into the design of ECL biosensors, and by demonstrating some representative works, we summarize the development status of ECL biosensors in detection of mycotoxins, heavy metal ions, antibiotics, pesticide residues, foodborne pathogens, and other illegal additives. Finally, the current challenges faced by ECL biosensors are outlined and the future directions for advancing ECL research are presented.

Hydrophilic Covalent Organic Frameworks Coated Steel Sheet As a Mass Spectrometric Ionization Source for the Direct Determination of Zearalenone and Its Derivatives

Zearalenone has attracted worldwide attention due to its toxic properties and threat to public health. A rapid determination method for zearalenone and its derivatives by hydrophilic covalent organic frameworks coated steel sheet (HCOFCS) combined with ambient mass spectrometry (AMS) was developed. The HCOFCS behaved as both a tip for solid-phase microextraction and a solid substrate for electrospray ionization mass spectrometry (ESI-MS). To evaluate the HCOFCS-ESI-MS method, five zearalenone and its derivatives in milk samples were determined, including zearalenone (ZEA), α-zearalenol (α-ZEL), β-zearalenol (β-ZEL), α-zearalanol (α-ZAL), and β-zearalanol (β-ZAL). After the extraction procedure, the HCOFCS was directly added with a high voltage for ESI-MS, and the analysis could be completed within 1 min. The developed method showed good linearity in the range 0.1-100 μg/L with a coefficient of determination (R²) > 0.9991. The limits of detection (LODs) and limits of quantitation (LOQs) ranged from 0.05 to 0.1 and 0.2 to 0.3 μg/L, respectively. The results demonstrated that the HCOFCS combined with ESI-MS can be used for the rapid and sensitive determination of trace ZEA and its derivatives in milk samples with satisfactory recoveries from 80.58% to 109.98% and reproducibility with relative standard deviations (RSDs) no more than 11.18%. Furthermore, HCOFCS showed good reusability, which could reuse at least 10 extraction cycles with satisfactory adsorption performance.

Rapid and sensitive detection of zearalenone in corn using SERS-based lateral flow immunosensor

Zearalenone (ZEN) is a universal mycotoxin contaminant in corn and its products. A surface-enhanced Raman scattering (SERS) based test strip was proposed for the detection of ZEN, which had the advantages of simplicity, rapidity, and high sensitivity. Core-shell Au@AgNPs with embedded reporter molecules (4-MBA) were synthesized as SERS nanoprobe, which exhibited excellent SERS signals and high stability. The detection range of ZEN for corn samples was 10-1000 μg/kg with the limit of detection (LOD) of 3.6 μg/kg, which is far below the recommended tolerable level (60 μg/kg). More importantly, the SERS method was verified by HPLC in the application on corn samples contaminated with ZEN, and the coincidence rates were in the range of 86.06%-111.23%, suggesting a high accuracy of the SERS assay. Therefore, the SERS-based test strip with an analysis time of less than 15 min is a promising tool for accurate and rapid detection of ZEN-field contamination.

Application of Nanomaterials for Coping with Mycotoxin Contamination in Food Safety: From Detection to Control

Mycotoxins, which are toxic secondary metabolites produced by fungi, are harmful to humans. Mycotoxin-induced contamination has drawn attention worldwide. Consequently, the development of reliable and sensitive detection methods and high-efficiency control strategies for mycotoxins is important to safeguard food industry safety and public health. With the rapid development of nanotechnology, many novel nanomaterials that provide tremendous opportunities for greatly improving the detection and control performance of mycotoxins because of their unique properties have emerged. This review comprehensively summarizes recent trends in the application of nanomaterials for detecting mycotoxins (fluorescence, colorimetric, surface-enhanced Raman scattering, electrochemical, and point-of-care testing) and controlling mycotoxins (inhibition of fungal growth, mycotoxin absorption, and degradation). These detection methods possess the advantages of high sensitivity and selectivity, operational simplicity, and rapidity. With research attention on the control of mycotoxins and the gradual excavation of the properties of nanomaterials, nanomaterials are also employed for the inhibition of fungal growth, mycotoxin absorption, and mycotoxin degradation, and impressive controlling effects are obtained. This review is expected to provide the readers insight into this state-of-the-art area and a reference to design nanomaterials-based schemes for the detection and control of mycotoxins.

Label-free ratiometric homogeneous electrochemical aptasensor based on hybridization chain reaction for facile and rapid detection of aflatoxin B1 in cereal crops

Aflatoxin B1 (AFB1) contamination has raised global concerns in agricultural and food industry; thus, sensitive, accurate and rapid AFB1 sensors are essential in many circumstances. Herein, we developed a label-free and immobilization-free ratiometric homogeneous electrochemical aptasensor based on hybridization chain reaction (HCR) for facile and rapid determination of AFB1. Methylene blue (MB) and ferrocene (Fc) were used as label-free probes to produce a response signal (I_MB) and a reference signal (I_Fc) in solution phase, respectively. The ratio of I_MB/I_Fc was used as a yardstick to quantify AFB1. HCR was exploited to enlarge the intensity of I_MB as well as ratiometric signal. By combining label-free homogeneous assay and ratiometric strategy, the resulting aptasensor offered sensitive, rapid, and reliable determinations of AFB1 with a detection limit of 38.8 pg mL^-1. The aptasensor was then used to determine AFB1 in cereal samples with comparable reliability as HPLC-MS.

An ultra-high-sensitivity electrochemiluminescence aptasensor for Pb2+ detection based on the synergistic signal-amplification strategy of quencher abscission and G-quadruplex generation

Signal amplification provides an effective way to improve detection performance. Herein, an ultrasensitive electrochemiluminescence (ECL) aptasensor for Pb²⁺ detection was developed based on a dual signal-amplification strategy of the abscission of a quencher and the generation of a G-quadruplex by one-step and simultaneous way. Nitrogen-doped carbon quantum dots linked with complementary DNA (cDNA-NCQDs) at the sensing interface was applied as the quencher of a tris(4,4'-dicarboxylic acid-2,2'-bipyridyl)ruthenium(II) (Ru(dcbpy)₃²⁺)/tripropylamine system to minimize the ECL signal due to the intermolecular hydrogen bond-induced energy-transfer process. Upon the addition of Pb²⁺, its specific binding with the aptamer triggered the abscission of cDNA-NCQDs, accompanied by the formation of G-quadruplex on the surface of the electrode, both of which amplified the intensity of the light emission. The ECL amplification efficiency induced by the above two mechanisms (78.6%) was valuably greater than that of their sum value (69.3%). This synergistic effect resulted in high detection sensitivity of the ECL aptasensor, which allowed to thereby obtain Pb²⁺ measurements in the range of 1 fM - 10 nM with an ultra-low detection limit of 0.19 fM. The Pb²⁺-mediated synergistic signal-amplification ECL strategy can provide a new approach for integrating various amplification strategies.

Signal enhancing strategies in aptasensors for the detection of small molecular contaminants by nanomaterials and nucleic acid amplification

Small molecular contaminants (such as mycotoxins, antibiotics, pesticide residues, etc.) in food and environment have given rise to many biological and ecological toxicities, which has attracted worldwide attention in recent years. Meanwhile, due to the advantages of aptamers such as high specificity and stability, easy synthesis and modification, as well as low cost and immunogenicity, various aptasensors for the detection of small molecular contaminants have been flourishing. An aptasensor as a whole is composed of an aptamer-based target recognizer and a signal transducer, which are fields of concentrated research. In the practical detection applications, in order to achieve the quantitative detection of small molecular contaminants at low abundance in real samples, a large number of signal enhancing strategies have been utilized in the development of aptasensors. Recent years is a vintage period for efficient signal enhancing strategies of aptasensors by the aid of nanomaterials and nucleic acid amplification that are applied in the elements for target recognition and signal conversion. Therefore, this paper meticulously reviews the signal enhancing strategies based on nanomaterials (including the (quasi-)zero-dimensional, one-dimensional, two-dimensional and three-dimensional nanomaterials) and nucleic acid amplification (including enzyme-assisted nucleic acid amplification and enzyme-free nucleic acid amplification). Furthermore, the challenges and future trends of the abovementioned signal enhancing strategies for application are also discussed in order to inspire the practitioners in the research and development of aptasensors for small molecular contaminants.

A sensitive electrochemiluminescence biosensor for assay of cancer biomarker (MMP-2) based on NGQDs-Ru@SiO2 luminophore

A sensitive biosensor that can be used for the determination of matrix metalloproteinase 2 (MMP-2) was proposed. The biosensor was developed by using an excellent self-enhanced nanocomposites as an illuminant and a peptide as a recognition element. For the electrostatic attraction between Ru(bpy)₃²⁺ and nitrogen-doped graphene quantum dots (NGQDs), the self-enhanced electrochemiluminescence (ECL) nanocomposites of NGQDs-Ru(bpy)₃²⁺-doped silica nanoparticles (NGQDs-Ru@SiO₂) were synthesized through a simple sol-gel process. Then, a specific peptide (labeled sulfhydryl) was combined with the self-enhanced ECL nanocomposites (carboxyl in NGQDs) via acylation reaction to obtain the peptide-NGQDs-Ru@SiO₂ nanoprobe, which was fabricated onto the gold electrode surface via Au-S bond. The peptide of the ECL nanoprobe was exposed to cleavage in the presence of MMP-2, which caused the signal substance to move farther away from the electrode, leading to a decrease of the ECL signal. The proposed NGQDs-Ru@SiO₂-labeled peptide ECL biosensor displayed a lower detection limit of 6.5 pg mL^-1 than those of reported ECL methods. The proposed biosensor provided an outlook for future applications in other disease-associated biomarkers.

Coreactant-Free and Direct Electrochemiluminescence from Dual-Stabilizer-Capped InP/ZnS Nanocrystals: A New Route Involving n-Type Luminophore

Electrochemiluminescence (ECL) is conventionally generated in either an annihilation or a coreactant route, and the overwhelming majority of ECL research is conducted in the coreactant route via oxidizing or reducing the coexisting coreactant and luminophore. The coreacant-free ECL generated via merely oxidizing the luminophore would break through the ceiling of coreactant ECL via excluding the detrimental effects of exogenous coreactant and dissolved oxygen. Herein, by exploiting the rich-electron nature of n-type nanocrystals (NCs), coreacant-free ECL is achieved via merely oxidizing 3-mercaptopropionic acid (MPA) and mercaptosuccinic acid (MSA) capped InP/ZnS NCs, i.e., InP/ZnS_MPA-MSA. The electron-rich InP/ZnS_MPA-MSA can be electrochemically injected with holes via two oxidative processes at around +0.75 and +1.37 V (vs Ag/AgCl), respectively, and the exogenous hole can directly combine the conduction band (CB) electron of InP/ZnS_MPA-MSA, resulting in two coreactant-free ECL processes without employing any exogenous coreactant. The deprotonation process for the carboxyl group of the capping agents can provide a negatively charged surface to InP/ZnS_MPA-MSA and enhance the coreactant-free ECL. The hole-injecting process at +1.37 is much stronger than that at +0.75 V and eventually enables an ∼2000-fold enhanced ECL at +1.37 V than that at +0.75 V. The ECL at +1.37 V can be utilized for coreactant-free ECL immunoassay with prostate-specific antigen (PSA) as analyte, which exhibits an acceptable linear response from 5 pg·mL^-1 to 1 ng·mL^-1 with a limit of detection of 0.3 pg·mL^-1. The coreactant-free ECL route would provide an alternative to both annihilation and coreactant routes, simplify the ECL assay procedure and deepening the ECL mechanism investigations.

A novel approach to design electrochemical aptamer-based biosensor for ultrasensitive detecting of zearalenone as a prevalent estrogenic mycotoxin

BACKGROUND

Zearalenone is a well-known estrogenic mycotoxin produced by Fusarium species, a serious threat to the agricultural and food industries worldwide. Zearalenone, with its known metabolites, are biomarkers of exposure to certain fungi, primarily through food. It has considerable toxic effects on biological systems due to its carcinogenicity, mutagenicity, renal toxicity, teratogenicity, and immunotoxicity.

INTRODUCTION

This study aims to design a simple, quick, precise, and cost-effective method on a biosensor platform to evaluate the low levels of this toxin in foodstuffs and agricultural products.

METHODS

An aptamer-based electrochemical biosensor was introduced that utilizes screen-printed gold electrodes instead of conventional electrodes. The electrode position process was employed to develop a gold nanoparticle-modified surface to enhance the electroactive surface area. Thiolated aptamers were immobilized on the surface of gold nanoparticles, and subsequently, the blocker and analyte were added to the modified surface. In the presence of a redox probe, electrochemical characterization of differential pulse voltammetry, cyclic voltammetry, and electrochemical impedance spectroscopy were used to investigate the various stages of aptasensor fabrication.

RESULTS

The proposed aptasensor for zearalenone concentration had a wide linear dynamic range covering the 0.5 pg/mL to 100 ng/mL with a 0.14 pg/mL detection limit. Moreover, this aptasensor had high specificity so that a non-specific analyte cannot negatively affect the selectivity of the aptasensor.

CONCLUSION

Overall, due to its simple design, high sensitivity, and fast performance, this aptasensor showed a high potential for assessing zearalenone in real samples, providing a clear perspective for designing a portable and cost-effective device.

Novel electrochemiluminescent assay for the aptamer-based detection of testosterone

This work presents a proof-of-concept assay for the detection and quantification of small molecules based on aptamer recognition and electrochemiluminescence (ECL) readout. The testosterone-binding (TESS.1) aptamer was used to demonstrate the novel methodology. Upon binding of the target, the TESS.1 aptamer is released from its complementary capture probe - previously immobilized at the surface of the electrode - producing a decrease in the ECL signal after a washing step removing the released (labeled) TESS.1 aptamer. The analytical capability of the ECL assay towards testosterone detection was investigated displaying a linear range from 0.39 to 1.56 μM with a limit of detection of 0.29 μM. The selectivity of the proposed assay was assessed by performing two different negative control experiments; i) detection of testosterone with a randomized ssDNA sequence and ii) detection of two other steroids, i.e. deoxycholic acid and hydrocortisone with the TESS.1 aptamer. In parallel, complementary analytical techniques were employed to confirm the suggested mechanism: i) native nano-electrospray ionization mass spectrometry (native nESI-MS) was used to determine the stoichiometry of the binding, and to characterize aptamer-target interactions; and, ii) isothermal titration calorimetry (ITC) was carried out to elucidate the dissociation constant (K_d) of the complex of testosterone and the TESS.1 aptamer. The combination of these techniques provided a complete understanding of the aptamer performance, the binding mechanism, affinity and selectivity. Furthermore, this important characterization carried out in parallel validates the real functionality of the aptamer (TESS.1) ensuring its use towards selective testosterone binding in further biosensors. This research will pave the way for the development of new aptamer-based assays coupled with ECL sensing for the detection of relevant small molecules.

Recent achievements and advances in optical and electrochemical aptasensing detection of ATP based on quantum dots

The design and fabrication of high sensitive and selective biosensing platforms areessential goals to precisely recognize biomaterials in biological assays. In particular, determination of adenosine triphosphate (ATP) as the main energy currency of the cells and one of the most important biomolecules in living organisms is a pressing need in advanced biological detection. Recently, aptamer-based biosensors are introduced as a new direct strategy in which the aptamers (Apts) directly bind to the different targets and detect them on the basis of conformational changes and physical interactions. They can also be conjugated to optical and electronic probes such as quantum dot (QD) nanomaterials and provide unique QD aptasensing platforms. Currently, these Apt-based biosensors with excellent recognition features have attracted extensive attention due to the high specificity, rapid response and facile construction. Therefore, in this review article, recent achievements and advances in aptasensing detection of ATP based on different detection methods and types of QDs are discussed. In this regard, the optical and electrochemical aptasensors have been categorized based on detection methods; fluorescence (FL), electrochemiluminescence (ECL) and photoelectrochemical (PEC) and they have been also divided to two main groups based on QDs; metal-based (M-based) and carbon-based (C-based) materials. Then, their advantages and limitations have been highlighted, compared and discussed in detail.

Aptasensors for mycotoxins in foods: Recent advances and future trends

Mycotoxin contamination in foods has posed serious threat to public health and raised worldwide concern. The development of simple, rapid, facile, and cost-effective methods for mycotoxin detection is of urgent need. Aptamer-based sensors, abbreviated as aptasensors, with excellent recognition capacity to a wide variety of mycotoxins have attracted ever-increasing interest of researchers because of their simple fabrication, rapid response, high sensitivity, low cost, and easy adaptability for in situ measurement. The past few decades have witnessed the rapid advances of aptasensors for mycotoxin detection in foods. Therefore, this review first summarizes the reported aptamer sequences specific for mycotoxins. Then, the recent 5-year advancements in various newly developed aptasensors, which, according to the signal output mode, are divided into electrochemical, optical and photoelectrochemical categories, for mycotoxin detection are comprehensively discussed. A special attention is taken on their strengths and limitations in real-world application. Finally, the current challenges and future perspectives for developing novel highly reliable aptasensors for mycotoxin detection are highlighted, which is expected to provide powerful references for their thorough research and extended applications. Owing to their unique advantages, aptasensors display a fascinating prospect in food field for safety inspection and risk assessment.

Label-free Hg(II) electrochemiluminescence sensor based on silica nanoparticles doped with a self-enhanced Ru(bpy)32+-carbon nitride quantum dot luminophore

Herein, a label-free, self-enhanced electrochemiluminescence (ECL) sensing strategy for divalent mercury (Hg(II)) detection was presented. First, a novel self-enhanced ECL luminophore was prepared by combining the ECL reagent tris(2, 2'-bipyridyl) dichlororuthenium(II) hexahydrate (Ru(bpy)₃²⁺) and its co-reactant carbon nitride quantum dots (CNQDs) via electrostatic interactions. In contrast to traditional ECL systems where the emitter and its co-reactant underwent an intermolecular reaction, the self-enhanced ECL system exhibited a shortened electron-transfer distance and enhanced luminous efficiency because the electrons transferred from CNQDs to oxidized Ru(bpy)₃²⁺ via an intramolecular pathway. Furthermore, the as-prepared self-enhanced ECL material was encapsulated in silica (SiO₂) nanoparticles to generate a Ru-QDs@SiO₂ luminophore. Based on the different affinity of Ru-QDs@SiO₂ nanoparticles for single-stranded DNA (ssDNA) and Hg(II)-triggered double-stranded DNA (dsDNA), a label-free ECL biosensor for Hg(II) detection was developed as follows: in the absence of Hg(II), ssDNA was adsorbed on Ru-QDs@SiO₂ surface via hydrogen bond, electrostatic, and hydrophobic interaction. Thus, quenched ECL signal was observed. On the contrary, in the presence of Hg(II), stable dsDNA was formed and carried the ssDNA separating from Ru-QDs@SiO₂ surface, resulting in most of Ru-QDs@SiO₂ existing in their free state. Therefore, a recovered ECL intensity was obtained. On this basis, Hg(II) was measured by the proposed method in the range of 0.1 nM-10 μM, with a detection limit of 33 pM. Finally, Hg(II) spiked in water samples was measured to evaluate the practicality of the fabricated biosensor.

An intermolecular hydrogen-bond-induced quench-type Ru(dcbpy)32+/TPA electrochemiluminescence system by nitrogen-doped carbon quantum dots

Here, we show that nitrogen-doped carbon quantum dots (NCQDs) strongly inhibits the anodic electrochemiluminescence (ECL) signal of a tris(4,4'-dicarboxylic acid-2,2'-bipyridyl) ruthenium(II) (Ru(dcbpy)₃²⁺)/tripropylamine (TPA) aqueous system. To determine the ECL-quenching mechanism, we used photoluminescence spectroscopy, UV-Visible absorption spectroscopy and dynamic simulation technology. Quenching of the ECL signal of Ru(dcbpy)₃²⁺/TPA by NCQDs was predominantly attributed to the interaction between Ru(dcbpy)₃²⁺ and NCQDs rather than that between TPA and NCQDs. Specifically, when Ru(dcbpy)₃²⁺ and NCQDs were in aqueous solution together, the carboxyl (-COOH) groups of Ru(dcbpy)₃²⁺ were in contact with oxygen- and nitrogen-containing groups on the surface of NCQDs and formed intermolecular hydrogen bonds. This process involved energy transfer from the excited-state Ru(dcbpy)₃²⁺ to the intermolecular hydrogen bonds, thus resulting in a decrease in the Ru(dcbpy)₃²⁺ ECL signal. On this basis, a quenching-type ECL sensor for the quantification of NCQDs was fabricated. The sensor had a wide linear range and an estimated detection limit of 0.0012 mg mL^-1, as well as excellent stability and selectivity. Satisfactory recoveries of 97.0-99.5% were obtained using the ECL sensor to quantify NCQDs in tap water. NCQDs could potentially be used as a quenching probe of Ru(dcbpy)₃²⁺ to construct various biosensors with widespread applications in the sensing field.

Fast construction of core-shell structured magnetic covalent organic framework as sorbent for solid-phase extraction of zearalenone and its derivatives prior to their determination by UHPLC-MS/MS

Magnetic covalent organic framework nanocomposite denoted as Fe₃O₄@TAPB-Tp with core-shell structure was fabricated via a simple template-mediated precipitation polymerization method at mild conditions. The polyimine network shell was created through the polymerization of 1,3,5-tris(4-aminophenyl)-benzene (TAPB) and 1,3,5-triformyl-phloroglucinol (Tp) in tetrahydrofuran (THF) by the Schiff-base reaction. Featuring with large specific surface area (163.19 m² g^-1), good solution dispersibility, and high stability, the obtained Fe₃O₄@TAPB-Tp exhibited high adsorption capacities and fast adsorption for zearalenone and its derivatives (ZEAs). The adsorption isotherms showed multilayer adsorption dominated at low concentration and monolayer adsorption at high concentration between the interface of ZEAs and Fe₃O₄@TAPB-Tp. With the Fe₃O₄@TAPB-Tp as sorbent, a magnetic solid-phase extraction-ultrahigh performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method was established for simultaneous adsorption and detection of five ZEAs in complex samples. The proposed method displayed favorable linearity, low limits of detection (0.003 ~ 0.018 μg kg^-1), and good repeatability (2.37~10.4%). The developed method has been applied for real sample analysis, with recoveries of 81.27~90.26%. These results showed that Fe₃O₄@TAPB-Tp has a good application potential for the adsorption of ZEAs in food samples. Magnetic covalent organic framework nanocomposite (Fe₃O₄@TAPB-Tp) were quickly fabricated at mild conditions and used as effective adsorbent for magnetic solid-phase extraction of zearalenone and its derivatives (ZEAs) from food samples prior to ultrahigh performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) analysis.