Eco-friendly active packaging consisting of nanostructured biopolymer matrix reinforced with TiO2 and essential oil: Application for preservation of refrigerated meat

Flavor profile analysis of grilled lamb seasoned with classic salt, chili pepper, and cumin (Cuminum cyminum) through HS-SPME-GC-MS, HS-GC-IMS, E-nose techniques, and sensory evaluation on Sonit sheep

In this study, the volatile flavor profiles of grilled lamb seasoned with salt, chili pepper, and cumin were analyzed employing HS-SPME-GC-MS, HS-GC-IMS, E-nose, and sensory evaluation techniques. The E-nose was found effective in differentiating the samples seasoned variously. A total of 67 volatile compounds were identified by HS-SPME-GC-MS, and 59 by HS-GC-IMS. The PCA demonstrated a correlation between the seasonings and the volatile compounds, with five principal components accounting for 99.54% of the total variance. 1-octen-3-ol, 3-furanmethanol, acetic acid, and heptanal were introduced by salt; compounds like propyl acetate were correlated with chili pepper; a broader range, including ethyl 3-methylbutanoate and high concentrations of alpha-pinene, was associated with cumin. Samples seasoned with all three ingredients showed similarities to those associated with cumin, alongside unique compounds such as gamma-octalactone and alpha-pinene. Sensory evaluations by consumers indicated that the combination of these seasonings significantly enhanced the overall acceptability of the grilled lamb. PRACTICAL APPLICATION: Utilizing modern analytical techniques, this study has successfully revealed the distinct impacts of seasonings-salt, chili pepper, and cumin-on the flavor profile of grilled lamb. By providing experimental data on how each seasonings influence the flavor profile of grilled lamb prepared with Sonit sheep. The research offers theoretical foundation for the development of grilled lamb products. By conducting a thorough comparison between GC-MS and GC-IMS, this study has expanded the understanding of the distinct characteristics of these two technologies. It has also provided a clearer analysis of some flavor compounds dimers produced in GC-IMS system.

Effect of cinnamaldehyde-nanoemulsion and nanostructured lipid carriers on physicochemical attributes of reduced-nitrite sausages

This study aimed to produce cinnamaldehyde (CA)-loaded nanostructured lipid carriers (NLC) and nanoemulsion (NE) to replace nitrite in sausage. The NLC and NE droplet sizes were 132 and 116 nm with encapsulation efficiency of 98 and 96 %, respectively. In in vitro antimicrobial assessment, the free CA and NE showed higher microbial activity against S. aureus and E. coli than NLC. Meanwhile, NE showed a faster release profile for CA than NLC. Among the samples, NE and NE + nitrite indicated the lowest peroxide value (3.7 ± 0.1), TVBN amount (8.6 ± 0.2), acidity (0.3 ± 0.02), microbial quality (against E. coli, C. perfringens, lactic acid bacteria, psychrophilic bacteria, total mold and yeast, and total viable counts), and sensory attribute, while the NE + nitrite sample exhibited better color properties and higher oxymyoglobin content (5-10 % higher). Therefore, NE + nitrite can be the best choice due to supporting the different quality parameters of sausage.

Recent advances in reinforced bioplastics for food packaging - A critical review

Recently, diversifying the material, method, and application in food packaging has been massively developed to find more environment-friendly materials. However, the mechanical and barrier properties of the bioplastics are major hurdles to expansion in commercial realization. The compositional variation with the inclusion of different fillers could resolve the lacking performance of the bioplastic. This review summarizes the various reinforcement fillers and their effect on bioplastic development. In this review, we first discussed the status of bioplastics and their definition, advantages, and limitations regarding their performance in the food packaging application. Further, the overview of different fillers and development methods has been discussed thoroughly. The application of reinforced bioplastic for food packaging and its effect on food quality and shelf life are highlighted. The environmental issues, health concerns, and future perspectives of the reinforced bioplastic are also discussed at the end of the manuscript. Adding different fillers into the bioplastic improves physical, mechanical, barrier, and active properties, which render the required protective functions to replace conventional plastic for food packaging applications. Various fillers, such as natural and chemically synthesized, could be incorporated into the bioplastic, and their overall properties improve significantly for the food packaging application.

Fabrication of multifunctional ethyl cellulose/gelatin-based composite nanofilm for the pork preservation and freshness monitoring

In this study, an active and intelligent nanofilm for monitoring and maintaining the freshness of pork was developed using ethyl cellulose/gelatin matrix through electrospinning, with the addition of natural purple sweet potato anthocyanin. The nanofilm exhibited discernible color variations in response to pH changes, and it demonstrated a higher sensitivity towards volatile ammonia compared with casting film. Notably, the experimental findings regarding the wettability and pH response performance indicated that the water contact angle between 70° and 85° was more favorable for the smart response of pH sensitivity. Furthermore, the film exhibited desirable antioxidant activities, water vapor barrier properties and also good antimicrobial activities with the incorporation of ε-polylysine, suggesting the potential as a food packaging film. Furthermore, the application preservation outcomes revealed that the pork packed with the nanofilm can prolong shelf life to 6 days, more importantly, a distinct color change aligned closely with the points indicating the deterioration of the pork was observed, changing from light pink (indicating freshness) to light brown (indicating secondary freshness) and then to brownish green (indicating spoilage). Hence, the application of this multifunctional film in intelligent packaging holds great potential for both real-time indication and efficient preservation of the freshness of animal-derived food items.

Bio-nanocomposite active packaging films based on carboxymethyl cellulose, myrrh gum, TiO2 nanoparticles and dill essential oil for preserving fresh-fish (Cyprinus carpio) meat quality

This study developed a composite film for packaging refrigerated common carp fillets using carboxymethyl cellulose (CMC) (1.5 % w/v)/Myrrh gum (MG) (0.25 % w/v) base with the addition of titanium dioxide nanoparticles (TiO2 NPs) (0.25 %, 0.5 %, and 1 %) and Dill essential oil (DEO) (1.5 %, 2.25 %, and 3 %). The film was produced using a casting method and optimized for mechanical and barrier properties. The incorporation of DEO and TiO2 NPs into CMC/MG composite films significantly reduced moisture content (MC) and water vapor permeability (WVP), improved their tensile strength (TS), and increased their antimicrobial and antioxidant properties. Moreover, MG can improve the physicomechanical properties of the CMC/MG composite films. The film components had good compatibility without significant aggregation or cracks. In conclusion, the optimized CMC/MG (1.5 %/0.25 %) film containing TiO2 NPs (0.5 %), and DEO (2.25 %) has the best overall performance and can be a good source for making edible film. Functionally, this bioactive nanocomposite film significantly increased the shelf life of refrigerated fish fillet samples for 12 days by inhibiting microbial growth and reducing the oxidation rate compared to the control sample. The knowledge obtained from this study can guide the development of bio-nanocomposite and biodegradable food packaging films based on CMC/MG to increase the shelf life of food products and environmental protection.

Enhancing the lipid stability of foods of animal origin using edible packaging systems

Foods of animal origin are prone to oxidation due to their high lipid content and fatty acid profile. Edible packaging systems have evolved as a new way of preserving animal-derived foods and have been reported to retard lipid oxidation using antioxidant molecules from side-streams, waste, and agricultural by-products. Studies have evaluated previously undocumented film materials and novel bioactive molecules as additives for edible packaging for animal-derived foods. However, none of the studies is specifically focused on evaluating the packaging systems available for enhancing lipid stability. This paper thoroughly examines and discusses the application of edible packaging containing novel antioxidant molecules for controlling the lipid oxidation of animal-derived foods. The paper analyses and interprets the main findings of the recently published research papers. The materials and active principles used for enhancing lipid stability have been summarised and the underlying mechanisms discussed in detail. Studies should aim at using cheaper and readily available natural ingredients in future for the production of affordable packaging systems.

Development and characterization of smart double-layer nanofiber mats based on potato starch-turnip peel anthocyanins and guar gum-cinnamaldehyde

This experiment was conducted with the objectives of developing bilayer nanofiber mats based on potato starch-turnip peel extract (PS-TPE) and guar gum-cinnamaldehyde (GG-CA) for freshness monitoring and enhancing the quality of lamb meat during cooled storage conditions. Encapsulating CA/TPE into the nanofibers resulted in reduced tensile strength, water vapor permeability, moisture content, and water solubility. Colorimetric nanofibers, including PS-GG-TPE 6%, PS-GG-TPE 6%-CA 0.5%, and PS-GG-TPE 6%-CA 1%, presented red color at pH 1-4, purplish red at pH 5-7, green at pH 8-10, and brown at pH 11-12. The color of PS-GG-TPE 6% nanofiber mats changed from white to purplish red, signaling that the lamb meats had turned from fresh to spoiled. PS-GG-CA 1%, PS-GG-TPE 6%-CA 0.5%, and PS-GG-TPE 6%-CA 1% nanofibers have the potential to be utilized to control the growth of spoilage-related microorganisms for extending the shelf-life of fresh lamb meat under cooled storage conditions up to 13 days.

Nanocellulose Composite Films in Food Packaging Materials: A Review

Owing to the environmental pollution caused by petroleum-based packaging materials, there is an imminent need to develop novel food packaging materials. Nanocellulose, which is a one-dimensional structure, has excellent physical and chemical properties, such as renewability, degradability, sound mechanical properties, and good biocompatibility, indicating promising applications in modern industry, particularly in food packaging. This article introduces nanocellulose, followed by its extraction methods and the preparation of relevant composite films. Meanwhile, the performances of nanocellulose composite films in improving the mechanical, barrier (oxygen, water vapor, ultraviolet) and thermal properties of food packaging materials and the development of biodegradable or edible packaging materials in the food industry are elaborated. In addition, the excellent performances of nanocellulose composites for the packaging and preservation of various food categories are outlined. This study provides a theoretical framework for the development and utilization of nanocellulose composite films in the food packaging industry.

Smart packaging films based on corn starch/polyvinyl alcohol containing nano SIM-1 for monitoring food freshness

There is at present an acute need for the construction of biopolymer-based smart packaging material that can be applied for the real-time visual monitoring of food freshness. Herein, a nano-sized substituted imidazolate material (SIM-1) with ammonia-sensitive and antibacterial ability was effectively manufactured and then anchored within corn starch/polyvinyl alcohol (CS/PVA) blend to construct biopolymeric smart active packaging material. The structure, physical and functional performances of CS/PVA-based films with different content of SIM-1 (0.5, 1.0 and 2.0 wt% on CS/PVA basis) were then explored in detail. Results revealed that the incorporated SIM-1 nanocrystals were equally anchored within the CS/PVA matrix owing to the establishment of potent hydrogen-bonding interactions, which produced an obvious improvement in the compatibility of CS/PVA blend film, as well as its mechanical strength, water/oxygen barrier and UV-screening performances. The constructed CS/PVA/SIM-1 blend films further demonstrated superior long-term color stability property, ammonia-sensitive and antibacterial functions. Furthermore, the CS/PVA/SIM-1 blend films were utilized for effectively monitoring the deterioration of shrimp via observable color alteration. The above findings suggested the potential applications of CS/PVA/SIM-1 blend films in smart active packaging.

Gelatin-sodium alginate packaging film with date pits extract: An eco-friendly packaging for extending raw minced beef shelf life

Gelatin-sodium alginate-based active packaging films were formulated by including date pits extracts (DPE), as bioactive compound, in raw minced beef meat packaging. The DPE effects at 0.37, 0.75 and 1.5% (w/w, DPE/ gelatin-sodium alginate) on physical, optical, antioxidant and antibacterial properties of established films were assessed. Findings showed that film lightness decreased with the incorporation of DPE. Physical, antioxidant and anti-food-borne pathogens capacities were enhanced by increasing DPE concentration in the films. For 2,2-Diphenyl-1-picrylhydrazyl (DPPH) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), the films with 1.5% DPE had the greatest levels (94 and 88%, respectively). DPE films (1.5%) also exhibited the highest anti-Listeria moncytogenes activity, with an inhibition zone of 25 mm. Moreover, during 14 days at 4 °C, the bio-preservative impact of gelatin-sodium alginate film impregnated with DPE at three levels on microbial, chemical, and sensory characteristics of meat beef samples was evaluated. By the end of the storage, DPE at 1.5% enhanced the instrumental color, delayed chemical oxidation and improved sensory traits. By chemometric techniques (principal component analysis (PCA) and heat maps), all data allowed to obtain helpful information by segregating all the samples at each storage time. PCA and heat maps could connect oxidative chemical changes, instrumental color parameters, and microbiological properties to sensory attributes. These data offer an approach to well interpreting the sensory quality and how they are affected by chemical and microbiological changes in the studied meat samples. Our findings indicated the potential of the gelatin-sodium alginate film incorporated with DPE for enhancing meat safety and quality.

The Extraction and Impact of Essential Oils on Bioactive Films and Food Preservation, with Emphasis on Antioxidant and Antibacterial Activities-A Review

Essential oils, consisting of volatile compounds, are derived from various plant parts and possess antibacterial and antioxidant properties. Certain essential oils are utilized for medicinal purposes and can serve as natural preservatives in food products, replacing synthetic ones. This review describes how essential oils can promote the performance of bioactive films and preserve food through their antioxidant and antibacterial properties. Further, this article emphasizes the antibacterial efficacy of essential oil composite films for food preservation and analyzes their manufacturing processes. These films could be an attractive delivery strategy for improving phenolic stability in foods and the shelf-life of consumable food items. Moreover, this article presents an overview of current knowledge of the extraction of essential oils, their effects on bioactive films and food preservation, as well as the benefits and drawbacks of using them to preserve food products.

Recent advances in the production of bionanomaterials for development of sustainable food packaging: A comprehensive review

Polymers originating from natural macromolecule based polymeric materials have gained popularity due to the demand for green resources to develop unique, eco-friendly, and high-quality biopolymers. The objective of this review is to address the utilization of bionanomaterials to improve food quality, safety, security, and shelf life. Bionanomaterials are synthesized by integrating biological molecules with synthetic materials at the nanoscale. Nanostructured materials derived from biopolymers such as cellulose, chitin, or collagen can be employed for the development of sustainable food packaging. Green materials are cost-effective, biocompatible, biodegradable, and renewable. The interaction of nanoparticles with biological macromolecules must be analyzed to determine the properties of the packaging film. The nanoparticles control the growth of bacteria that cause food spoiling by releasing distinctive chemicals. Bio-nanocomposites and nanoencapsulation systems have been used in antimicrobial bio-based packaging solutions to improve the efficiency of synergism. Nanomaterials can regulate gas and moisture permeability, screen UV radiation, and limit microbial contamination, keeping the freshness and flavor of the food. Food packaging based on nanoparticles embedded biopolymers can alleviate environmental concerns by lowering the amount of packaging materials required and enhancing packaging recyclability. This results in less waste and a more eco-sustainable approach to food packaging. The study on current advances in the production of bionanomaterials for development of sustainable food packaging involves a detailed investigation of the available data from existing literature, as well as the compilation and analysis of relevant research results using statistical approaches.

Storage stability of chocolate can be enhanced using locust protein-based film incorporated with E. purpurea flower extract-based nanoparticles

The study aimed to develop a locust protein (Loct-Prot)-based film to enhance the lipid oxidative and storage stability of chocolate. The E. purpurea flower extract based-nanoparticles (EFNPs) were developed using ultrasonication (500 W and 20 kHz for 10 min) following a green method of synthesis. The EFPNs were incorporated at different levels [T0 (0%), T1 (1.0%), T2 (1.5%), and T3 (2.0%)] to impart bioactive properties to the Loct-Prot-based films which were used for packaging of white chocolate during 90 days trial. The addition of EFPNs increased (P < 0.05) the density of the Loct-Prot-based film which in turn decreased (P < 0.05) the transmittance (%) and WVTR (water vapour transmission rate, mg/mt2) with increasing levels of addition. While brightness (L*) showed a decrease, redness (a*) and yellowness (b*) increased with increasing concentration of EFPNs. No significant (P > 0.05) effect was recorded on other physicomechanical parameters of the film. The addition of EFPNs (P < 0.05) increased the mean values of all the antioxidant and antimicrobial parameters (total flavonoid and phenolic contents, FRAP, DPPH, and ABTS activities, antioxidant release and inhibitory halos) of the film. The presence of Loct-Prot-based film decreased the lipid (TBARS and free fatty acids) and protein (total carbonyl content) oxidation of the chocolate samples during storage. A significant (P < 0.05) increase was observed in the antioxidant properties [FRAP (µM TE/100 g) and DPPH and ABTS activities (% inhibition)] of the chocolate samples after one month and the sensory and microbial qualities towards the end of the storage. The gastrointestinal digestion simulation showed a positive impact on the antioxidant properties of the chocolate. Based on our results, Loct-Prot-based film incorporated with EFPNs can be used to enhance the storage stability of chocolate during storage.

Properties of Allicin-Zein Composite Nanoparticle Gelatin Film and Their Effects on the Quality of Cold, Fresh Beef during Storage

Allicin is a kind of natural antimicrobial active substance, but its water solubility is poor, and it is easy to degrade. In order to improve the stability and bioavailability of allicin, allicin-zein composite nanoparticles (Al-Ze) were prepared by the combination method of antisolvent precipitation and electrostatic deposition, and their characteristic parameters, such as average particle size, polydispersity index (PDI), and ζ-potential, were analyzed. Then, Al-Ze was used as the delivery carrier for the active substance (allicin), and gelatin with good film-forming properties was selected as the film-forming matrix to prepare Al-Ze gelatin films. The optical properties, mechanical properties, and characterization parameters were used to analyze the prepared composite materials; the results confirmed that Al-Ze gelatin film has good mechanical properties and barrier properties. The prepared film was applied to the storage of cold, fresh beef, and the quality change of beef was monitored at 4 °C. The results showed that Al-Ze gelatin film could effectively delay the quality deterioration of beef. This paper provides a new idea and data support for the application of Al-Ze gelatin film in meat storage and fresh-keeping, and offers new insight for the promotion and application of allicin in the food industry.

Recent Trends in Active Packaging Using Nanotechnology to Inhibit Oxidation and Microbiological Growth in Muscle Foods

Muscle foods are highly perishable products that require the use of additives to inhibit lipid and protein oxidation and/or the growth of spoilage and pathogenic microorganisms. The reduction or replacement of additives used in the food industry is a current trend that requires the support of active-packaging technology to overcome novel challenges in muscle-food preservation. Several nano-sized active substances incorporated in the polymeric matrix of muscle-food packaging were discussed (nanocarriers and nanoparticles of essential oils, metal oxide, extracts, enzymes, bioactive peptides, surfactants, and bacteriophages). In addition, the extension of the shelf life and the inhibitory effects of oxidation and microbial growth obtained during storage were also extensively revised. The use of active packaging in muscle foods to inhibit oxidation and microbial growth is an alternative in the development of clean-label meat and meat products. Although the studies presented serve as a basis for future research, it is important to emphasize the importance of carrying out detailed studies of the possible migration of potentially toxic additives, incorporated in active packaging developed for muscle foods under different storage conditions.

A critical review on biodegradable food packaging for meat: Materials, sustainability, regulations, and perspectives in the EU

The development of biodegradable packaging is a challenge, as conventional plastics have many advantages in terms of high flexibility, transparency, low cost, strong mechanical characteristics, and high resistance to heat compared with most biodegradable plastics. The quality of biodegradable materials and the research needed for their improvement for meat packaging were critically evaluated in this study. In terms of sustainability, biodegradable packagings are more sustainable than conventional plastics; however, most of them contain unsustainable chemical additives. Cellulose showed a high potential for meat preservation due to high moisture control. Polyhydroxyalkanoates and polylactic acid (PLA) are renewable materials that have been recently introduced to the market, but their application in meat products is still limited. To be classified as an edible film, the mechanical properties and acceptable control over gas and moisture exchange need to be improved. PLA and cellulose-based films possess the advantage of protection against oxygen and water permeation; however, the addition of functional substances plays an important role in their effects on the foods. Furthermore, the use of packaging materials is increasing due to consumer demand for natural high-quality food packaging that serves functions such as extended shelf-life and contamination protection. To support the importance moving toward biodegradable packaging for meat, this review presented novel perspectives regarding ecological impacts, commercial status, and consumer perspectives. Those aspects are then evaluated with the specific consideration of regulations and perspective in the European Union (EU) for employing renewable and ecological meat packaging materials. This review also helps to highlight the situation regarding biodegradable food packaging for meat in the EU specifically.

Characterization and Application of Guar Gum/Polyvinyl Alcohol-Based Food Packaging Films Containing Betacyanins from Pokeweed (Phytolacca acinosa Roxb.) Berries and Silver Nanoparticles

Food packaging films were prepared by using guar gum/polyvinyl alcohol (GP) as the film matrix, 2% Ag nanoparticles (AgNPs) as reinforcing filler and antimicrobial agent, and 1%, 2% and 3% pokeweed betacyanins (PB) as the colorant and antioxidant agent. The structures and color-changing, barrier, mechanical, thermal and antioxidant/antibacterial properties of different films were measured. The results show that the PB were pH-sensitive pigments with pink, purple and yellow colors at pH 3-8, pH 9-11 and pH 12, respectively. PB improved the compatibility of guar gum and polyvinyl alcohol through hydrogen bonds. The films with PB showed a color-changing capacity under ammonia vapor and good color stability in chilled storage. AgNPs and PB elevated the barrier capacity of GP film to light, water vapor and oxygen gas. Meanwhile, AgNPs and PB improved the stiffness, thermal stability and antioxidant/antibacterial activity of GP film. The film with AgNPs and 3% PB showed the highest barrier capacity, stiffness, thermal stability and antioxidant/antimicrobial activity. In shrimp spoilage test, the films with AgNPs and 2% and 3% PB indicated shrimp freshness through film color changes. The results reveal the potential use of the prepared films in active and smart packaging.

A bibliometrics visualization analysis of active packaging system for food packaging

This bibliometric study includes publications on the use of active packaging in food packaging from 2000 to 2021. The number of research related to this study tends to increase annually with an annual growth rate of 23.76%, totaling 857 articles. In this study it was found that the most influential countries in the field of Active Packaging are Spain, China, and Brazil. Moreover, the International Journal of Biological Macromolecules and Nerín are the most prolific journal and author in scientific publications, respectively. Active packaging, food packaging, and antimicrobial are often used based on the total link strength out of the 1,775 keywords. The keyword analysis based on time found new terms that are being studied by many researchers, namely, bioplastics as environmentally friendly packaging, based on polysaccharides and nanoparticles, which have the potential to be developed or collaborated for breakthroughs. Therefore, the use of active packaging shows a promising trend for the packaging industry in the future.

Metal-Based Nanoparticles in Food Packaging and Coating Technologies: A Review

Food security has continued to be a topic of interest in our world due to the increasing demand for food. Many technologies have been adopted to enhance food supply and narrow the demand gap. Thus, the attempt to use nanotechnology to improve food security and increase supply has emerged due to the severe shortcomings of conventional technologies, which have made them insufficient to cater to the continuous demand for food products. Hence, nanoparticles have been identified to play a major role in areas involving food production, protection, and shelf-life extensions. Specifically, metal-based nanoparticles have been singled out to play an important role in manufacturing materials with outstanding properties, which can help increase the shelf-life of different food materials. The physicochemical and biological properties of metal-based nanoparticles, such as the large surface area and antimicrobial properties, have made them suitable and adequately useful, not just as a regular packaging material but as a functional material upon incorporation into biopolymer matrices. These, amongst many other reasons, have led to their wide synthesis and applications, even though their methods of preparation and risk evaluation remain a topic of concern. This review, therefore, briefly explores the available synthetic methods, physicochemical properties, roles, and biological properties of metal-based nanoparticles for food packaging. Furthermore, the associated limitations, alongside quality and safety considerations, of these materials were summarily explored. Although this area of research continues to garner attention, this review showed that metal-based nanoparticles possess great potential to be a leading material for food packaging if the problem of migration and toxicity can be effectively modulated.

Edible packaging systems for enhancing the sensory quality of animal-derived foods

Maintaining the sensory quality of animal-derived foods from paddock to plate is a big challenge due to their fatty acid profile and susceptibility to oxidative changes and microbial spoilage. Preventive measures are taken by manufacturers and retailers to offset the adverse effects of storage to present animal foods to consumers with their best sensory attributes. The use of edible packaging systems is one of the emerging strategies that has recently attracted the attention of researchers and food processors. However, a review that specifically covers the edible packaging systems focused on improving the sensory quality of animal-derived foods is missing in the literature. Therefore, the objective of this review is to discuss in detail various edible packaging systems currently available and their mechanisms for enhancing the sensory properties of animal-derived foods. The review includes the findings of recent papers published during the last 5 years and summarises the novel materials and bioactive agents.

Preparation and Application of Active Bionanocomposite Films Based on Sago Starch Reinforced with a Combination of TiO2 Nanoparticles and Penganum harmala Extract for Preserving Chicken Fillets

The aim of this study was to develop sago starch-based bionanocomposite films containing TiO₂ nanoparticles and Penganum harmala extract (PE) to increase the shelf life of chicken fillets. First, sago starch films containing different levels of TiO₂ nanoparticles (1, 3, and 5%) and PE (5, 10, and 15%) were prepared. The barrier properties and antibacterial activity of the films against different bacteria strains were investigated. Then, the produced films were used for the chicken fillets packaging, and the physicochemical and antimicrobial properties of fillets were estimated during 12-day storage at 4 °C. The results showed that the addition of nano TiO₂ and PE in the films increased the antibacterial activity against gram-positive (S. aureus) higher than gram-negative (E. coli) bacteria. The water vapor permeability of the films decreased from 2.9 to 1.26 (×10^-11 g/m·s·Pa) by incorporating both PE and nano TiO₂. Synergistic effects of PE and nano TiO₂ significantly decreased the oxygen permeability of the sago starch films from 8.17 to 4.44 (cc.mil/m²·day). Application results of bionanocomposite films for chicken fillet storage at 4 °C for 12 days demonstrated that the films have great potential to increase the shelf life of fillets. The total volatile basic nitrogen (TVB-N) of chicken fillets increased from 7.34 to 35.28 after 12 days, whereas samples coated with bionanocomposite films increased from 7.34 to 16.4. For other physicochemical and microbiological properties of chicken fillets, similar improvement was observed during cold storage. It means that the bionanocomposite films could successfully improve the shelf life of the chicken fillets by at least eight days compared to the control sample.

Evaluation of the Antioxidant and Antimicrobial Potential of SiO2 Modified with Cinnamon Essential Oil (Cinnamomum Verum) for Its Use as a Nanofiller in Active Packaging PLA Films

One of the main causes of food spoilage is the lipid oxidation of its components, which generates the loss of nutrients and color, together with the invasion of pathogenic microorganisms. In order to minimize these effects, active packaging has played an important role in preservation in recent years. Therefore, in the present study, an active packaging film was developed using polylactic acid (PLA) and silicon dioxide (SiO₂) nanoparticles (NPs) (0.1% w/w) chemically modified with cinnamon essential oil (CEO). For the modification of the NPs, two methods (M1 and M2) were tested, and their effects on the chemical, mechanical, and physical properties of the polymer matrix were evaluated. The results showed that CEO conferred to SiO₂ NPs had a high percentage of 2,2-diphenyl-l-picrylhydrazyl (DPPH) free radical inhibition (>70%), cell viability (>80%), and strong inhibition to E. coli, at 45 and 11 µg/mL for M1 and M2, respectively, and thermal stability. Films were prepared with these NPs, and characterizations and evaluations on apple storage were performed for 21 days. The results show that the films with pristine SiO₂ improved tensile strength (28.06 MPa), as well as Young's modulus (0.368 MPa) since PLA films only presented values of 27.06 MPa and 0.324 MPa, respectively; however, films with modified NPs decreased tensile strength values (26.22 and 25.13 MPa), but increased elongation at break (from 5.05% to 10.32-8.32%). The water solubility decreased from 15% to 6-8% for the films with NPs, as well as the contact angle, from 90.21° to 73° for the M2 film. The water vapor permeability increased for the M2 film, presenting a value of 9.50 × 10^-8 g Pa^-1 h^-1 m^-2. FTIR analysis indicated that the addition of NPs with and without CEO did not modify the molecular structure of pure PLA; however, DSC analysis indicated that the crystallinity of the films was improved. The packaging prepared with M1 (without Tween 80) showed good results at the end of storage: lower values in color difference (5.59), organic acid degradation (0.042), weight loss (24.24%), and pH (4.02), making CEO-SiO₂ a good component to produce active packaging.

Preparation and characterization of carboxymethyl chitosan/pullulan composite film incorporated with eugenol and its application in the preservation of chilled meat

To solve the problem of easy spoilage of chilled meat during storage, we fabricated a novel composite film using carboxymethyl chitosan (CMCS)/pullulan (Pul)/eugenol (E) by casting method. The results showed that the mechanical properties of the films were better when the CMCS/Pul ratio was 2.5/2.5. The Fourier transform infrared spectroscopy (FTIR) results showed that intermolecular hydrogen bonds were formed among E, CMCS, and Pul, which was consistent with the rheological test results. Scanning electron microscopic (SEM) images showed that eugenol was well dispersed in the CMCS/Pul matrix. The addition of eugenol significantly increased the antibacterial properties and antioxidant properties. Moreover, when 5% eugenol was added, the water vapor permeability (WVP) of the film reduced to 2.41 × 10^-11 g/m·s·Pa. Finally, the freshness of the chilled meat wrapped with the eugenol-containing composite film was prolonged, thereby offering a potential alternative to synthetic materials.

Fabrication and characterization of hybrid eco-friendly high methoxyl pectin/gelatin/TiO2/curcumin (PGTC) nanocomposite biofilms for salmon fillet packaging

Hybrid eco-friendly nanocomposite films were fabricated by blending high-methoxyl pectin, gelatin, TiO₂, and curcumin through the solution casting method. Various concentrations (0-5 wt%) of TiO₂ nanoparticles (TNPs) and curcumin as an organic filler were added to the blend solutions. A high TNP concentration affected the surface morphology, roughness, and compactness of the films. Additionally, 3D mapping revealed the nanoparticle distribution in the film layers. Moisture content, water solubility, and light transmittance reduced dramatically with increasing TNP content, in accordance with the water vapor and oxygen permeabilities. X-ray diffraction revealed that the films were semicrystalline nanocomposites, and the thermal properties of the films increased when 5 wt% of TNPs was incorporated into the blend solution. Fourier-transform infrared and Raman analyses revealed interactions among biopolymers, nanoparticles, and organic fillers through hydrogen bonding. The shelf life of fresh salmon fillets was prolonged to six days for all groups, revealed by total viable counts and psychrotrophic bacteria counts, and the pH of the salmon fillets could be extended until the sixth day for all groups. Biodegradation assays demonstrated a significant weight loss in the nanocomposite films. Therefore, a nanocomposite film with 5 wt% TNPs could potentially be cytotoxic to NIH 3T3 cells.

The impact of cold plasma innovative technology on quality and safety of refrigerated hamburger: Analysis of microbial safety and physicochemical properties

Atmospheric cold plasma (ACP) is an innovative non-thermal decontamination technology that is considered a great alternative to conventional preservation methods. Most importantly, improving microbial safety along with maintaining the sensory and quality properties of the treated foods, especially for perishable products. Hence, this study aimed to investigate the antimicrobial effects of novel dielectric barrier discharge (DBD) and Jet cold plasma systems and their impact on the physicochemical, color, and sensory properties of refrigerated hamburger samples. In the current study, hamburger samples were inoculated with Staphylococcus aureus, Escherichia coli, Molds and Yeasts microbial suspension (~10⁶ CFU/mL), and then were treated with argon (Ar), helium (He), nitrogen (N), and atmosphere (Atm) gases at different times (s) (0, 30, 60, 90, 180, 360). Similarly, uninoculated samples were considered for total viable count (TVC) testing. The results exhibited that plasma system type, gas type, and treatment time had a significant antimicrobial effect with a microbial reduction ranging from 0.01 to 2 log CFU/g and 0.04-1.5 log CFU/g for DBD and Jet plasma systems, respectively. Also, a treatment time longer than 90 s for DBD and 180 s for jet resulted in a significant reduction in microbial count. The ability of atmospheric cold plasma to inactivate tested foodborne pathogenic bacteria (E. coli and S. aureus) was stronger than other gases because the concentration of O₃ and NO gases in atmospheric plasma is higher than other used plasma gases. Surface color measurements (L*, a* and b*) of samples in both methods (DBD and Jet) were not significantly affected. Moreover, samples treated with various plasma gases have indicated insignificant oxidation changes (Thiobarbituric acid assay). These outcomes can assist to reduce microbial contamination and oxidation of hamburgers as a high-consumption and perishable product using ACP technology. Owing to the non-thermal nature of ACP, samples treated with ACP have exhibited no or least effects on the physical, chemical, and sensory features of various food products. As a result, cold plasma innovative technology can be proposed and used as an efficient preservative method to increase the shelf life of food products.

Incorporating Portulaca oleracea extract endows the chitosan-starch film with antioxidant capacity for chilled meat preservation

This study aimed to investigate the application potential of Portulaca oleracea extract (POE) in active packaging for the preservation of chilled meat. First, the antioxidant capacity and active ingredients of POE were systematically studied. The results demonstrated that POE has excellent antioxidant capacity and contains abundant antioxidant compounds. Subsequently, antioxidant-active packaging films based on chitosan and starch containing different concentrations of POE (CS/POE films) were successfully developed. The main physicochemical and mechanical properties of the CS/POE films were characterized and evaluated. The CS/POE films exhibited remarkable antioxidant activity and can significantly reduce lipid oxidation in meat. Compared with polyethylene film, the CS/POE films-treated meats had better preservation effects and longer shelf-life. These findings suggested that CS/POE film has the potential to become a good alternative to conventional plastics in food packaging. In conclusion, Portulaca oleracea extract is an excellent natural antioxidant with great potential in active packaging for chilled meat preservation.

Amino modified cellulose fibers loaded zinc oxide nanoparticles via paper-making wet-forming for antibacterial materials

Bacterial infection has become one of the major threats to human health all over the world, and the development and application of antibacterial materials has drawn great attention. Based on the Schiff-base structure, ZnONPs@ACFs are obtained by loading zinc oxide nanoparticles (ZnONPs) on amino cellulose fibers (ACFs) in-situ through the coordination of amino groups with metal ions. The results of FT-IR, XRD and UV-vis demonstrate that ZnONPs are successfully loaded and uniformly dispersed on ACF surface, and the ACFs maintain intact morphology observed by SEM. Furthermore, the zero-span tensile strength of ZnONPs@ACFs is 66.48 N/cm (ROL: 24.98 N/cm/s) under the optimum conditions, which indicates that ZnONPs@ACFs have a certain strength and can be used to make antibacterial sheet materials via paper-making wet-forming process. Accordingly, the ZnONPs@ACF composites show inhibition zones of 4.95 mm and 1.10 mm against E. coli and S. aureus, respectively. The new cellulose-based antibacterial materials demonstrate potential applications in the field of food packaging and biological medicine etc.

The use of essential oils in chitosan or cellulose-based materials for the production of active food packaging solutions: a review

In recent decades, interest in sustainable food packaging systems with additional functionality, able to increase the shelf life of products, has grown steadily. Following this trend, the present review analyzes the state of the art of this active renewable packaging. The focus is on antimicrobial systems containing nanocellulose and chitosan, as support for the incorporation of essential oils. These are the most sustainable and readily available options to produce completely natural active packaging materials. After a brief overview of the different active packaging technologies, the main features of nanocellulose, chitosan, and of the different essential oils used in the field of active packaging are introduced and described. The latest findings about the nanocellulose- and chitosan-based active packaging are then presented. The antimicrobial effectiveness of the different solutions is discussed, focusing on their effect on other material properties. The effect of the different inclusion strategies is also reviewed considering both in vivo and in vitro studies, in an attempt to understand more promising solutions and possible pathways for further development. In general, essential oils are very successful in exerting antimicrobial effects against the most diffused gram-positive and gram-negative bacteria, and affecting other material properties (tensile strength, water vapor transmission rate) positively. Due to the wide variety of biopolymer matrices and essential oils available, it is difficult to create general guidelines for the development of active packaging systems. However, more attention should be dedicated to sensory analysis, release kinetics, and synergetic action of different essential oils to optimize the active packaging on different food products. © 2022 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

What is the role of active packaging in the future of food sustainability? A systematic review

Nowadays, the strong increase in products consumption, the purchase of products on online platforms as well as the requirements for greater safety and food protection are a concern for food and packaging industries. Active packaging brings huge advances in the extension of product shelf-life and food degradation and losses reduction. This systematic work aims to collect and evaluate all existing strategies and technologies of active packaging that can be applied in food products, with a global view of new possibilities for food preservation. Oxygen scavengers, carbon dioxide emitters/absorbers, ethylene scavengers, antimicrobial and antioxidant active packaging, and other active systems and technologies are summarized including the products commercially available and the respective mechanisms of action. © 2022 Society of Chemical Industry.

Quality and Shelf-Life Evaluation of Fresh Beef Stored in Smart Packaging

Beef is a perishable food product susceptible to deterioration due to microbial growth. Therefore, this study aimed to ascertain how active and intelligent packaging performs by tracking the change in the quality of fresh beef stored at low temperatures. The intelligent packaging method employed indicators with solutions of Bromo Phenol Blue (BPB) and Phenol Red (PR) to monitor the change in beef quality. Additionally, active packaging used garlic extract with various concentrations at 0%, 15%, and 20% to maintain the quality of beef packaged at 10 °C temperatures. The findings illustrated that a packaging indicator label can be implemented to monitor the change in the quality of fresh beef stored at 10 °C temperatures. This was signified by a change in the indicator color from dark yellow to orange and red, fading to purple. Meanwhile, observations on active packaging demonstrated that 15% and 20% of garlic extract were the most effective approaches for preserving beef quality. The correlation level of indicator label color analysis and the effectiveness of active packaging with all beef spoilage metrics demonstrated a positive correlation in preserving quality and identifying the degree of beef damage. Therefore, these active and intelligent packaging indicators can be applied to monitor and retain the quality of packaged beef.

Fabrication of multifunctional materials based on chitosan/gelatin incorporating curcumin-clove oil emulsion for meat freshness monitoring and shelf-life extension

A new multifunctional film with active and intelligent effects was developed by incorporating curcumin-clove oil emulsion into natural materials. The basic properties, functional characteristics, and pH/NH₃-sensitivity of films were investigated, and then these films were applied to extend shelf-life and monitor freshness of meat. Curcumin solution and emulsion illustrated significant color variations at different pH values. The incorporation of emulsion improved the UV-vis barrier and water resistance properties of films, which blocked most of UV-light and its water contact angle reached 100.03°. Meanwhile, the films had stronger mechanical strength and higher thermal stability, with elongation at break reaching 79.18 % and the maximum degradation temperature rising to 316 °C. Moreover, emulsion made films have a slow-release effect on clove oil, which not only enhanced the antioxidant property but also significantly improved their antibacterial activity. Additionally, the multifunctional films presented a significant color response to acidic/alkaline environments over a short time interval and could be easily identified by naked eyes. Finally, the films effectively extended the shelf-life of fresh meat by 3 days at 4 °C and visually monitored freshness through color changes in real-time. This knowledge provides insights and ideas for the development of novel food packaging with both active and intelligent functions.

Preparation and characterization of chitosan/whey isolate protein active film containing TiO2 and white pepper essential oil

Active packaging films are designed to improve quality and extend the food shelf life by incorporating functional active ingredients into biopolymer films. This study developed a bioactive film based on chitosan (CS) and whey isolated protein (WPI) incorporated with 0.01 wt% TiO2 and 0.1 wt% white pepper essential oil (WPEO). The physicochemical properties of the prepared film were also evaluated comprehensively. The results showed that water solubility and water vapor permeability of the film incorporated with TiO2 and WPEO were 25.09% and 0.0933 g mm m–2 h–1 KPa–1, respectively, which were significantly higher than those of other films (P &lt; 0.05). In addition, the UV barrier properties of films incorporating TiO2 and WPEO have improved. The films were characterized by Fourier transform infrared (FTIR) and scanning electron microscopy (SEM). The FTIR results showed interactions between TiO2 and WPEO with CS/WPI compound, and the SEM results indicated a good incorporation of TiO2 into the composite films. The antioxidative and antibacterial properties of films were significantly enhanced by incorporating WPEO. According to results, the developed biocomposite film can be considered as a packaging material.

Monitoring the effect of active packaging films with silver-kaolinite using different packaging systems on the quality of beef meat

Active packaging films based on gelatin with silver-kaolinite (Ag-Kln) were developed and their effects on the quality and microbial growth of beef meat stored in different packaging systems (cling film, vacuum and modified atmosphere packaging) at 4 °C for 13 days were evaluated. The analysis revealed that Ag-Kln packaging films had no adverse effects on the pH and colour of the beef samples irrespective of the packaging system used. Beef meat in packaging with active films lost more weight (P < 0.05) than without active films for meat in the vacuum and modified systems on day 13. In general, these gelatin films with Ag-Kln showed the potential as antibacterial films and could enhance the shelf life of food products, however, further studies are required to establish the release rate of silver from packaging films, as well as test the efficiency of these materials under different storage conditions. In conclusion, this study revealed that gelatin film with silver-kaolinite is a promising antibacterial agent and preservation material for food shelf life extension.

An Update on Effectiveness and Practicability of Plant Essential Oils in the Food Industry

Consumer awareness and demands for quality eco-friendly food products have made scientists determined to concentrate their attention on sustainable advancements in the utilization of bioactive compounds for increasing safety and food quality. Essential oils (EOs) are extracted from plants and exhibit antimicrobial (antibacterial and antifungal) activity; thus, they are used in food products to prolong the shelf-life of foods by limiting the growth or survival of microorganisms. In vitro studies have shown that EOs are effective against foodborne bacteria, such as Escherichia coli, Listeria monocytogenes, Salmonella spp., and Staphylococcus aureus. The growing interest in essential oils and their constituents as alternatives to synthetic preservatives has been extensively exploited in recent years, along with techniques to facilitate the implementation of their application in the food industry. This paper’s aim is to evaluate the current knowledge on the applicability of EOs in food preservation, and how this method generally affects technological properties and consumers’ perceptions. Moreover, essential aspects concerning the limitation of the available alternatives are highlighted, followed by a presentation of the most promising trends to streamline the EOs’ usability. Incorporating EOs in packaging materials is the next step for green and sustainable foodstuff production and a biodegradable method for food preservation.

An overview of the natural antimicrobial alternatives for sheep meat preservation

Sheep meat is consumed and appreciated all over the world for its nutritional value and flavor. However, this meat is very perishable and easily subjected to the action of both spoilage and pathogenic microorganisms. For this reason, in combination with cold storage, effective preservation techniques are required. There is increasing interest in the application of natural antimicrobials, such as essential oils, extracts, spices, and by-products of the food industry. This review analyses the studies on natural antimicrobials in sheep meat and sheep meat products and gathers evidence about the encouraging results achieved on the reduction and/or elimination of spoilage and pathogenic microorganisms. The use of these natural antimicrobial alternatives might open up important perspectives for industrial application, considering that this specific meat is often traded over long distances. In fact, on the basis of scientific literature, natural antimicrobials can be considered a sustainable and affordable alternative to extend the shelf life of sheep meat and guarantee its safety, although many factors need to be further investigated, such as the sensory impact, potential toxicity, and economic aspects. For all these issues, investigated in some of the studies reviewed here, it is fundamental to obtain the antimicrobial effect with the minimum amount of effective substance to avoid sensory modifications, toxic effects, and unbearable costs. This study sets foundations for the possible direction of future studies, which will contribute to identify effective solutions for industrial applications of natural antimicrobials in the sheep meat industry.

The Emergence of Edible and Food-Application Coatings for Food Packaging: A Review

Food packaging was not as important in the past as it is now, because the world has more people but fewer food resources. Food packaging will become more prevalent and go from being a nice-to-have to an essential feature of modern life. Food packaging has grown to be an important industry sector in today’s world of more people and more food. Food packaging innovation faces significant challenges in extending perishable food products’ shelf life and contributing to meeting daily nutrient requirements as people nowadays are searching for foods that offer additional health advantages. Modern food preservation techniques have two objectives: process viability and safe, environmentally friendly end products. Long-term storage techniques can include the use of edible coatings and films. This article gives a succinct overview of the supplies and procedures used to coat food products with conventional packaging films and coatings. The key findings summarizing the biodegradable packaging materials are emphasized for their ability to prolong the freshness and flavor of a wide range of food items; films and edible coatings are highlighted as viable alternatives to traditional packaging methods. We discuss the safety concerns and opportunities presented by applying edible films and coatings, allowing it to be used as quality indicators for time-sensitive foods.

Development of pH-responsive konjac glucomannan/pullulan films incorporated with acai berry extract to monitor fish freshness

In this work, konjac glucomannan (KGM)-based film reinforced with pullulan (PL) and acai berry extract (ABE) was developed by solvent casting method. The as-prepared films performed pH-sensitive properties, which can be potentially applied for fish freshness detection. Rheology, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM) were used to characterize chemical structure and morphology of ABE-loaded KGM/PL (KP) films (KP-ABE). FT-IR spectrum indicated that hydrogen bond dominated the formation of KP-ABE films. Adding PL contributed to enhanced mechanical properties of KGM film with increased tensile strength (TS) from 21.25 to 50.27 MPa and elongation at break (EAB) from 10.64 to 19.19 %. Incorporating ABE upgraded flexibility, UV-shielding, thermostability, water barrier (decreased Water vapor permeability (WVP) from 2.07 to 1.67 g·mm/m²·day kPa), antioxidant, and antibacterial ability of KP films, but weakened TS. In addition, KP-ABE films can reflect fish freshness in real time through color variability. Therefore, KP-ABE films exhibited potential applications in intelligent food packaging materials.

Metal and metal oxide-based antiviral nanoparticles: Properties, mechanisms of action, and applications

Certain types of metal-based nanoparticles are effective antiviral agents when used in their original form ("bare") or after their surfaces have been functionalized ("modified"), including those comprised of metals (e.g., silver) and metal oxides (e.g., zinc oxide, titanium dioxide, or iron dioxide). These nanoparticles can be prepared with different sizes, morphologies, surface chemistries, and charges, which leads to different antiviral activities. They can be used as aqueous dispersions or incorporated into composite materials, such as coatings or packaging materials. In this review, we provide an overview of the design, preparation, and characterization of metal-based nanoparticles. We then discuss their potential mechanisms of action against various kinds of viruses. Finally, the applications of some of the most common metal and metal oxide nanoparticles are discussed, including those fabricated from silver, zinc oxide, iron oxide, and titanium dioxide. In general, the major antiviral mechanisms of metal and metal oxide nanoparticles have been observed to be 1) attachment of nanoparticles to surface moieties of viral particles like spike glycoproteins, that disrupt viral attachment and uncoating in host cells; 2) generation of reactive oxygen species (ROS) that denature viral macromolecules such as nucleic acids, capsid proteins, and/or lipid envelopes; and 3) inactivation of viral glycoproteins by the disruption of the disulfide bonds of viral proteins. Several physicochemical properties of metal and metal oxide nanoparticles including size, shape, zeta potential, stability in physiological conditions, surface modification, and porosity can all impact the antiviral efficacy of the nanoparticles.

Recent advances in biobased and biodegradable polymer nanocomposites, nanoparticles, and natural antioxidants for antibacterial and antioxidant food packaging applications

Inorganic nanoparticles (NPs) and natural antioxidant compounds are an emerging trend in the food industry. Incorporating these substances in biobased and biodegradable matrices as polysaccharides (e.g., starch, cellulose, and chitosan) and proteins has highlighted the potential in active food packaging applications due to more significant antimicrobial, antioxidant, UV blocking, oxygen scavenging, water vapor permeability effects, and low environmental impact. In recent years, the migration of metal NPs and metal oxides in food contact packaging and their toxicological potential have raised concerns about the safety of the nanomaterials. In this review, we provide a comprehensive overview of the main biobased and biodegradable polymer nanocomposites, inorganic NPs, natural antioxidants, and their potential use in active food packaging. The intrinsic properties of NPs and natural antioxidant actives in packaging materials are evaluated to extend shelf-life, safety, and food quality. Toxicological and safety aspects of inorganic NPs are highlighted to understand the current controversy on applying some nanomaterials in food packaging. The synergism of inorganic NPs and plant-derived natural antioxidant actives (e.g., vitamins, polyphenols, and carotenoids) and essential oils (EOs) potentiated the antibacterial and antioxidant properties of biodegradable nanocomposite films. Biodegradable packaging films based on green NPs-this is biosynthesized from plant extracts-showed suitable mechanical and barrier properties and had a lower environmental impact and offered efficient food protection. Furthermore, AgNPs and TiO₂ NPs released metal ions from packaging into contents insufficiently to cause harm to human cells, which could be helpful to understanding critical gaps and provide progress in the packaging field.

When Scent Becomes a Weapon—Plant Essential Oils as Potent Bioinsecticides

Crop protection still mostly relies on synthetic pesticides for crop pest control. However, the rationale for their continued use is shaded by the revealed adverse effects, such as relatively long environmental persistence that leads to water and soil contamination and retention of residues in food that brings high risks to human and animal health. As part of integrated pest management, biopesticides may provide crop protection, being eco-friendly and safe for humans and non-target organisms. Essential oils, complex mixtures of low-molecular-weight, highly volatile compounds, have been highlighted as major candidates for plant-derived bioinsecticides that are up to the sustainable biological standard. In this review, we screened the insecticidal activity of essential oils or their purified compounds, with focus given to their modes of action, along with the analyzed advantages and problems associated with their wider usage as plant-derived insecticides in agriculture.