Fluorescence detection of malachite green in fish tissue using red emissive Se,N,Cl-doped carbon dots

Construction of eco-friendly dual carbon dots ratiometric fluorescence probe for highly selective and efficient sensing mercury ion

In present work, blue carbon dots (b-CDs) were derived from ammonium citrate and guanidine hydrochloride, and red carbon dots (r-CDs) were stemmed from malonate, ethylenediamine and meso‑tetra (4-carboxyphenyl) porphin based on facile hydrothermal method. Eco-friendly ratiometric fluorescence probe was innovatively constructed to effectively measure Hg2+ utilizing b-CDs and r-CDs. The developed probe displayed two typical emission peaks at 450 nm from b-CDs and 650 nm from r-CDs under the excitation at 360 nm. Mercury ion has strong quenching effect on the fluorescence intensity at 450 nm due to the electron transfer process and the fluorescence change at 450 nm was used as the response signal, whereas the fluorescence intensity at 650 nm kept unchangeable which resulted from the chemical inertness between Hg2+ and r-CDs, serving as the reference signal in the sensing system. Under optimal circumstances, this probe exhibited an excellent linearity between the fluorescence response values of ΔF450/F650 and Hg2+ concentrations over range of 0.01-10 µmol/L, and the limit of detection was down to 5.3 nmol/L. Furthermore, this probe was successfully employed for sensing Hg2+ in practical environmental water samples with satisfied recoveries of 98.5%-105.0%. The constructed ratiometric fluorescent probe provided a rapid, environmental-friendly, reliable, and efficient platform for measuring trace Hg2+ in environmental field.

A highly selective dual-signal response ratiometric fluorescence sensing strategy for malachite green in fish based on carbon dots/copper nanoclusters nanocomposite

Malachite green (MG), a widely used antiparasitic agent, poses health risks to human due to its genotoxic and carcinogenic properties. Herein, a stable dual-emission fluoroprobe of carbon dots/copper nanoclusters is prepared for highly selective detection of MG based on the inner filter effect. This probe exhibits characteristic emission bands at 435 and 625 nm when excited at 376 nm. After adding MG, the both emission signals were significantly quenched, and the ratio of fluorescence intensity (F435/F625) was linearly related to the concentration of MG in the range of 0.05-40 μmol L-1 with a limit of detection of 18.2 nmol L-1. Meanwhile, the two signals exhibit linear relationships with the concentration of MG, respectively, and the corresponding detection results were consistent. The fluoroprobe was successfully used for the detection of MG in fish samples with the recoveries ranging from 96.0% to 103.8% and a relative standard deviation of <3.3%.

Reliable detection of malachite green by self-assembled SERS substrates based on gold-silicon heterogeneous nano pineapple structures

Morphology regulation of heterodimer nanoparticles and the use of their asymmetric features for further practical applications are crucial because of the rich optical properties and various combinations of heterodimers. This work used silicon to asymmetrically wrap half of a gold sphere and grew gold branches on the bare gold surface to form heterogeneous nano pineapples (NPPs) which can effectively improve Surface-enhanced Raman scattering (SERS) properties through chemical enhancement and lightning-rod effect respectively. The asymmetric structures of NPPs enabled them to self-assemble into the monolayer membrane with consistent branch orientation. The prepared substrate had high homogeneity and better SERS ability than disorganized substrates, and achieved reliable detection of malachite green (MG) in clams with a detection limit of 7.8 × 10-11 M. This work provided a guide to further revise the morphology of heterodimers and a new idea for the use of asymmetric dimers for practically photochemical and biomedical sensing.

Highly Sensitive and Selective Fluorescence and Smartphone-Based Sensor for Detection of Rutin Using Boron Nitrogen Co-doped Graphene Quantum Dots

This research explores the fluorescence properties and photostability of boron nitrogen co-doped graphene quantum dots (BN-GQDs), evaluating their effectiveness as sensors for rutin (RU). BN-GQDs are biocompatible and exhibit notable absorbance and fluorescence characteristics, making them suitable for sensing applications. The study utilized various analytical techniques to investigate the chemical composition, structure, morphology, optical attributes, elemental composition, and particle size of BN-GQDs. Techniques included X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM). The average particle size of the BN-GQDs was determined to be approximately 3.5 ± 0.3 nm. A clear correlation between the emission intensity ratio and RU concentration was identified across the range of 0.42 to 4.1 μM, featuring an impressively low detection limit (LOD) of 1.23 nM. The application of BN-GQDs as fluorescent probes has facilitated the development of a highly sensitive and selective RU detection method based on Förster resonance energy transfer (FRET) principles. This technique leverages emission at 465 nm. Density Functional Theory (DFT) analyses confirm that FRET is the primary mechanism behind fluorescence quenching, as indicated by the energy levels of the lowest unoccupied molecular orbitals (LUMOs) of BN-GQDs and RU. The method's effectiveness has been validated by measuring RU concentrations in human serum samples, showing a recovery range between 97.8% and 103.31%. Additionally, a smartphone-based detection method utilizing BN-GQDs has been successfully implemented, achieving a detection limit (LOD) of 49 nM.

Smartphone-based dual inverse signal MOFs fluorescence sensing for intelligent on-site visual detection of malachite green

The development of intelligent, sensitive, and visual methods for the rapid detection of veterinary drug residues is essential to ensure food quality and safety. Here, a smartphone-based dual inverse signal MOFs fluorescence sensing system was proposed for intelligent in-site visual detection of malachite green (MG). A UiO-66-NH2@RhB-dual-emission fluorescent probe was successfully synthesized in one step using a simple one-pot method. The inner filter effect (IFE) quenches the red fluorescence, while hydrogen bonding interaction enhances the blue fluorescence, enabling highly sensitive, accurate, and visual detection of MG dual inverse signals through fluorescence analysis. The probe showed great linearity over a wide range of 0.1-100 μmol/L, with a limit of detection (LOD) of 20 nmol/L. By integrating smartphone photography and RGB (red, green, and blue) analysis, accurate quantitative analysis of MG in water and actual fish samples can be achieved within 5 min. This developed platform holds great promise for the on-site detection of MG in practical applications, with the advantages of simplicity, cost-effectiveness, and rapidity. Consequently, it may open up a new pathway for on-site evaluation of food safety and environmental health.

Facile fluorescence detection of malachite green in fish using molecularly imprinted polymers doped CdTe quantum dots based system

Malachite green (MG) possesses high toxicity, therefore, the detection of MG in fish tissues is of vital importance. A novel core-shell MIPs doped CdTe quantum dots coated silica nanoparticles (CdTe-MIP/SiO2 NPs) were synthesized via a simple one-pot strategy. The materials were characterized carefully. The resulting CdTe-MIP/SiO2 NPs were coated on the thin layer chromatography plate, and coupled with miniaturized fluorimeter for fluorescence detection of MG in fish samples. The resulting CdTe-MIP/SiO2 NPs based system possessed good linearity (0.01 ∼ 20 μmol/L), high recoveries (98.36 %∼101.45 %) and low detection limit (3.7 nmol/L) for MG. Furthermore, CdTe-MIP/SiO2 NPs based system were employed to measure fish samples spiked with MG, meanwhile, HPLC was utilized to evaluate the accuracy and reliability. And the paired t-test was conducted to evaluate differences between fluorescence method and HPLC, P > 0.05 means no significant difference was observed, the results demonstrated that both fluorescence method and HPLC are suitable for MG analysis.

Nitrogen and Chlorine Co-doped Carbon Dots as a Highly Selective and Sensitive Fluorescent Probe for Sensing of PH, Tetracycline Detection and Cell Imaging

Carbon dots have been widely focused on the field of sensing and detection due to their excellent optical property. Herein, novel orange fluorescent nitrogen and chlorine co-doped carbon dots (N,Cl-CDs) are obtained by one-pot hydrothermal method using o-phenylenediamine and neutral red. Based on the inner filter effect, the prepared N,Cl-CDs can be innovatively developed as an effective "signal-off" multifunctional sensing platform for sensitive determination of tetracycline. The proposed sensor was utilized to realize the determination of tetracycline in Rirver water samples/milk samples (λex = 390 nm, λem = 606 nm) with satisfactory recoveries and relative standard deviations. The linear range of are 0.05 to 45 μM and 45 to135 μM, and detection limit is 3.9 nM (3σ/m). Meanwhile, the luminescent intensity of N,Cl-CDs was reduced gradually when pH changed continuously from 12 to 2, showing a pH-responsive fluorescence property with two linear ranges of pH 3-7 and pH 7-10. In addition, due to the characteristics of low toxicity and excellent biocompatibility, the N, Cl-CDs were also used in the imaging of oocystis cells, which is hopeful to realize the detection of tetracycline in living cells.

A dual-mode sensing platform coupling two-signal ratiometric and colorimetric methods for detecting Au3+ based on surface state-regulated carbon nanodot

The considerable risk posed by Au3+ residues to the environment and human health has sparked interest in researching Au3+ monitoring techniques. The detection results in the usual ratio mode are more reliable. In this work, we develop a dual-mode strategy based on reducing carbon dots coupling with two-signal ratiometric and colorimetric methods for high-sensitivity, good-selectivity, and wide-range detection of Au3+. Cyan carbon dots (C-CDs) were synthesized by a simple and efficient one-step hydrothermal method. The C-CDs with rich amino group used m-phenylenediamine as carbon source, which made it have the potential as a reducing agent. After the addition of Au3+, Au3+ was reduced to Au0, generating stable gold nanoparticles (AuNPs). The fluorescence signal (F490) of C-CDs decreased. At the same time, the large size of AuNPs enhances the second-order scattering signal (S770) and produces the UV-visible absorption peak of AuNPs. Therefore, the dual-mode sensing strategy combining S770/F490 ratiometric and colorimetric detection of Au3+ is realized with high accuracy and sensitivity. Au3+ was determined in real samples and a good recovery was obtained. The dual-mode method has good performance and practicality, so it shows great potential for environment testing in a simple and reliable way.

Facile synthesis of nitrogen-doped carbon dots for ultrasensitive detection of anticancer drug gefitinib based on IFE

Gefitinib, a highly significant antitumor drug, is now commonly employed in clinical settings as a first-line treatment for patients with advanced or metastatic non-small cell lung cancer, colon cancer, and breast cancer. Herein, a convenient, rapid, and accurate fluorescence method based on nitrogen-doped carbon dots (NCDs) was designed for ultrasensitive detection of gefitinib. The NCDs were easily synthesized through one-pot hydrothermal process using p-phenylenediamine and D-glutamic acid as the precursors. The sensing strategy relied on the fluorescence of NCDs at 345 nm, which was selectively reduced by gefitinib based on the inner filter effect (IFE). With a broad linear range of 0.025-30 μg/mL and a low limit of detection of 5.5 ng/mL, the probe was successfully applied to the detection of gefitinib in human serum samples, demonstrating strong practicality, affordability, and high accuracy. The proposed sensor is simple in design, fast in detection and cost-effective, and exhibits promising application in drug real-time analysis.

The future of plant based green carbon dots as cancer Nanomedicine: From current progress to future Perspectives and beyond

BACKGROUND

The emergence of carbon dots (CDs) as anticancer agents had sparked a transformation in cancer research and treatment strategies. These fluorescent CDs, initially introduced in the early 2000 s, possess exceptional biocompatibility, tunable fluorescence, and surface modification capabilities, positioning them as promising tools in biomedical applications.

AIM OF REVIEW

The review encapsulates the transformative trajectory of green CDs as future anticancer nanomedicine, poised to redefine the strategies employed in the ongoing fight against cancer.

KEY SCIENTIFIC CONCEPTS OF REVIEW

The versatility of CDs was rooted in their various synthesis approaches and sustainable strategies, enabling their adaptability for diverse therapeutic uses. In vitro studies had showcased CDs' selective cytotoxicity against cancer cells while sparing healthy counterparts, forming the basis for targeted therapeutic potential. This selectivity had been attributed to the reactive oxygen species (ROS) generation, which opened avenues for targeted interventions. The role of CDs in combination therapies, synergizing with chemotherapy, radiotherapy, and targeted approaches was then investigated to heighten their anticancer efficacy. Notably, in vivo studies highlight CDs' remarkable biocompatibility and minimal side effects, endorsing their translational promise. Integration with conventional cancer treatments such as chemotherapy, radiotherapy, and immunotherapy amplified the versatility and effectiveness of CDs. The exploration of CDs' applications in photo-induced treatments further solidified their significance, positioning them as photosensitizers (PS) in photodynamic therapy (PDT) and photothermal agents (PA) in photothermal therapy (PTT). In PDT, CDs triggered the generation of ROS upon light exposure, facilitating cancer cell elimination, while in PTT, they induced localized hyperthermia within cancer cells, enhancing therapeutic outcomes. In vitro and in vivo investigations validated CDs' efficacy in PDT and PTT, affirming their potential for integration into combination therapies. Looking ahead, the future of CDs in anticancer treatment encompasses bioavailability, biocompatibility, synergistic treatments, tumor targeting, artificial intelligence (AI) and robotics integration, personalized medicine, and clinical translation. This transformative odyssey of CDs as future anticancer agents is poised to redefine the paradigm of cancer treatment strategies.

Cobalt oxyhydroxide nanosheet-modulated ratiometric fluorescence platform for the selective detection of malachite green in fish

A ratiometric fluorescence platform was developed based on the cobalt oxyhydroxide (CoOOH) nanosheet-modulated fluorescence response of blue emissive copper nanoclusters (Cu NCs) and yellow emissive o-phenylenediamine (OPD). CoOOH nanosheets showed dual function of strong absorption and oxidation ability, which can effectively quench the blue fluorescence of Cu NCs, with an excitation and emission peak maximum at 390 and 450 nm, respectively , and transfer the OPD into yellow fluorescence products, with an excitation and emission peak maximum at 390 and 560 nm, respectively. Upon introducing butyrylcholinesterase (BChE) and its substrates, CoOOH nanosheets were decomposed into Co2+, and malachite green (MG) showed strong inhibition ability to this  process. This resulted in the obvious difference on the ratio of blue and yellow fluorescence recorded on the system in the presence and absence of MG, which was utilized for the quantitative detection of MG, with a limit of detection of 0.140 μM and a coefficient of variation of 3.5%. The fluorescence ratiometric assay showed excellent detection performances in practical sample analysis.

A recyclable Eu3+-functionalized dual-emissive metal-organic framework for portable, rapid detection and efficient removal of malachite green

A europium-functionalized, dual-emissive, metal-organic framework-based fluorescence sensor (EuUCNDA) was constructed via post-synthetic modification of an UiO-66-type precursor through coordination interactions. EuUCNDA exhibited extremely high selectivity and sensitivity for malachite green (MG) with a low detection limit of 13.01 nM, a wide linear concentration range (0.05-50 μM), excellent anti-interference properties, a rapid response (<1 min), and the possibility of recycling. The good sensing performance of EuUCNDA enables the practical detection of MG in fish pond water and grass carp with good recoveries. Moreover, EuUCNDA can be reused for sensing MG and over 90% of fluorescence intensity can be restored after 7 cycles. Furthermore, EuUCNDA-embedded paper-based sensors combined with smartphone imaging afford portable and visual monitoring of MG in real samples. Notably, besides good sensing performance, EuUCNDA could efficiently remove MG from water. Hence, this work provides a recyclable and sensitive fluorescence sensor for portable, visual, rapid detection and efficient removal of MG.

Perspectives of different colour-emissive nanomaterials in fluorescent ink, LEDs, cell imaging, and sensing of various analytes

In the past 2 decades, multicolour light-emissive nanomaterials have gained significant interest in chemical and biological sciences because of their unique optical properties. These materials have drawn much attention due to their unique characteristics towards various application fields. The development of novel nanomaterials has become the pinpoint for different application areas. In this review, the recent progress in the area of multicolour-emissive nanomaterials is summarized. The different emissions (white, orange, green, red, blue, and multicolour) of nanostructure materials (metal nanoclusters, quantum dots, carbon dots, and rare earth-based nanomaterials) are briefly discussed. The potential applications of different colour-emissive nanomaterials in the development of fluorescent inks, light-emitting diodes, cell imaging, and sensing devices are briefly summarized. Finally, the future perspectives of multicolour-emissive nanomaterials are discussed.

Dual-functional marine algal carbon-based materials with highly efficient dye removal and disinfection control

The design and simple, green preparation of dual-functional materials for the decontamination of both hazardous dyes and pathogenic microorganisms from wastewater remain challenging currently. Herein, a promising marine algal carbon-based material (named C-SA/SP) with both highly efficient dye adsorptive and antibacterial properties was fabricated based on the incorporation of sodium alginate and a low dose of silver phosphate via a facile and eco-friendly approach. The structure, removal of malachite green (MG) and congo red (CR), and their antibacterial performance were studied, and the adsorption mechanism was further interpreted by the statistical physics models, besides the classic models. The results show that the maximum simulated adsorption capacity for MG reached 2798.27 mg/g, and its minimal inhibit concentration for Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) was 0.4 mg/mL and 0.2 mg/mL, respectively. The mechanistic study suggests that silver phosphate exerted the effects of catalytic carbon formation and pore formation, while reducing the electronegativity of the material as well, thus improving its dye adsorptive performance. Moreover, the MG adsorption onto C-SA/SP showed vertical orientation and a multi-molecular way, and its adsorption sites were involved in the adsorption process with the increase of temperature. Overall, the study indicates that the as-made dual-functional materials have good applied prospects for water remediation.

A dual-emissive supramolecular sensor for fast and ratiometric determination of carprofen in meat

Carprofen (CPF) is a non-steroidal anti-inflammatory drug that has been widely used in livestock for the treatment of fever and inflammation. Yet the massive use of CPF comes at the cost of its residue ubiquitous in the environment thus leading to a huge risk to human health. Therefore, development of a convenient analytical method for monitoring CPF is of considerable importance. In this study, a dual-emissive supramolecular sensor was facilely constructed using bovine serum albumin as the host and an environmentally sensitive dye as the guest. This sensor, for the first time, successfully realized the fluorescent detection of CPF with a rapid response, high sensitivity and selectivity. More importantly, this sensor exhibited a very unique ratiometric response to CPF, which endowed this method with satisfactory detection accuracy for food analysis. To the best of our knowledge, this is the first fluorescent method for fast determination of CPF in food.

The synthesis of N-doped carbon dots for visual differentiating and detection of tetracyclines

N-doped carbon dots (N-CDs) were synthesized from L-glutamine and triethanolamine using a one-step hydrothermal method. The N-CDs emitting blue fluorescence had selective responses to tetracyclines (TCs) and could be used as a fluorescent probe to realize the quantitative detection and qualitative analysis of TCs. A method for the determination of TCs using the N-CDs in actual samples was successfully established. The recovery rate was maintained at 97.50-105.60%, and the relative standard deviation (RSD) was less than 3%. In addition, TCs can be visually distinguished using filter paper by the different fluorescence colours (light green, dark blue, and yellow-green) of the N-CDs/TCs system under ultraviolet light. This study provides a relatively simple method to detect and identify TCs.

Quantitative detection of malachite green in sediment by a time-resolved immunofluorescence method combined with a portable 3D printing equipment platform

Rapid detection technology of aquaculture fishery drug residues is needed to supplement large-scale instrument methods. To do this, the time-resolved fluorescence immunoassay (TRFIA) method and portable three-dimensional (3D) printing equipment platform were used, in combination with smartphones, to detect malachite green (MG) in pond sediments. The TRFIA was coupled to MG monoclonal antibodies (mAb) through lanthanide metal microspheres europium (Eu³⁺). The labeled antibody produced competitive immunity in the immune reaction system, and the specific fluorescence intensity in the product was determined by a portable 3D printing equipment platform to achieve quantitative analysis. To test this method, leucomalachite green (LMG) was converted to MG by oxidation of dicyanoquinone (DDQ), and a qualitative analysis was achieved. Methodological evaluation results were satisfactory, recoveries were 83 %-104 %, the limit of detection (LOD) was 0.3 ng/g, the limit of quantitation (LOQ) was 0.7 ng/g, and the coefficient of variation was 1.3 %-7.3 %. The linear equation y = -0.1496x + 0.5585 was in the range of 0-10 ng/g. The linear regression correlation coefficient was 99.2 %. The TRFIA was confirmed and positive samples were measured. Results were consistent with the standard method, which demonstrated that the TRFIA was feasible and that the detection results were reliable. Compared with the national standard method, the TRFIA saves time, is more convenient, and has high sensitivity. It provides an efficient technical method for the rapid screening of MG in the sediments of aquaculture environments.

Dummy Template-Based Molecularly Imprinted Membrane Coating for Rapid Analysis of Malachite Green and Its Metabolic Intermediates in Shrimp and Fish

A novel malachite green molecularly imprinted membrane (MG-MIM) with specific selectivity for malachite green (MG) and leucomalachite green (LMG) was prepared using a hydrophobic glass fiber membrane as the polymer substrate, methyl violet as a template analog, 4-vinyl benzoic acid as the functional monomer, and ethyleneglycol dimethacrylate as the crosslinking agent. MG-MIM and non-imprinted membrane (NIM) were structurally characterized using scanning electron microscopy, surface area analyzer, Fourier-transform infrared spectrometer and synchronous thermal analyzer. The results showed that MG-MIM possessed a fluffier surface, porous and looser structure, and had good thermal stability. Adsorption properties of MG-MIM were investigated under optimal conditions, and adsorption equilibrium was reached in 20 min. The saturated adsorption capacities for MG and LMG were 24.25 ng·cm^-2 and 13.40 ng·cm^-2, and the maximum imprinting factors were 2.41 and 3.20, respectively. Issues such as "template leakage" and "embedding" were resolved. The specific recognition ability for the targets was good and the adsorption capacity was stable even after five cycles. The proposed method was successfully applied for the detection of MG and LMG in real samples, and it showed good linear correlation in the range of 0 to 10.0 μg·L^-1 (R² = 0.9991 and 0.9982), and high detection sensitivity (detection limits of MG and LMG of 0.005 μg/kg and 0.02 μg·kg^-1 in shrimp, and 0.005 μg/kg and 0.02 μg/kg in fish sample). The recoveries and relative standard deviations were in the range of 76.31-93.26% and 0.73-3.72%, respectively. The proposed method provides a simple, efficient and promising alternative for monitoring MG and LMG in aquatic products.

Ratiometric Fluorescence Immunoassay Based on Carbon Quantum Dots for Sensitive Detection of Malachite Green in Fish

Malachite green (MG) is a synthetic poisonous organic compound that has been banned in many countries as a veterinary drug for aquaculture. An efficient, fast and sensitive method is urgently needed for monitoring the illegal use of malachite green (MG) in aquaculture. In this study, a novel ratiometric fluorescence immunoassay was established. Nitrogen-doped carbon quantum dots were used as ratiometric fluorescent probes with a fluorescence peak at 450 nm. Horseradish peroxidase was employed to convert o-phenylenediamine to 2,3-diaminophenazine, with a new fluorescence peak at 580 nm and a strong absorption at 420 nm. The inner filter effect between N-CQD fluorescence and DAP absorption was identified. It allows for the ratiometric detection of MG using a fluorescent immunoassay. The results demonstrated a linear ratiometric fluorescence response for MG between 0.1 and 12.8 ng·mL^-1. The limit of detection of this method was verified to be 0.097 μg·kg^-1 with recoveries ranging from 81.88 to 108%, and the relative standard deviations were below 3%. Furthermore, this method exhibited acceptable consistency with the LC-MS/MS results when applied for MG screening in real samples. These results demonstrated a promising application of this novel ratiometric fluorescence immunoassay for MG screening with the merits of rapid detection, simple sample preparation, and stable signal readout. It can be an alternative to other traditional methods if there are difficulties in the availability of expensive instruments, and achieve comparable results or even more sensitivity than other reported methods.

Red-emitting carbon dots aggregates-based fluorescent probe for monitoring Cu2

R-CDAs have been synthesized in a one-pot solvothermal procedure starting from 3,4-diaminobenzoic acid in an acidic medium. Transmission electron microscopy (TEM) revealed that R-CDAs nanoparticles exhibited a much larger diameter of 7.2-28.8 nm than traditional monodisperse carbon dots. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FT-IR) revealed the presence of polar functional groups (hydroxyl, amino, carboxyl) on the surface of R-CDAs. Upon excitation with visible light (550 nm), R-CDAs emit stable, red fluorescence with a maximum at 610 nm. Under the optimum conditions, Cu²⁺ ions quench the fluorescence of this probe, and the signal is linear in a concentration range of copper ions between 5 and 600 nM with the detection limit of only 0.4 nM. Recoveries from 98.0 to 105.0% and relative standard deviations (RSD) from 2.8 to 4.5% have been obtained for detection of Cu²⁺ in real water samples. Furthermore, the R-CDAs fluorescent probe showed negligible cytotoxicity toward HeLa cells and good bioimaging ability, suggesting its potential applicability as a diagnostic tool in biomedicine.

Construction of ratiometric fluorescence sensor and test strip with smartphone based on dual-emission carbon dots for the specific detection of chlortetracycline

Concerns about environmental and food contamination caused by chlortetracycline (CTC) residues have prompted people to explore efficient and convenient CTC monitoring platforms. However, the reported fluorescent probes generally fail to selectively detect CTC due to the structural similarity of tetracycline antibiotics. Herein, an intrinsic dual-emission carbon dots (D-CDs) ratiometric fluorescence sensor was prepared for highly sensitive and selective determination of CTC over other tetracyclines by one-step synthesis. The sensor exhibited a significant fluorescence enhancement at 425 nm after introducing CTC. The fluorescence "turn on" of the sensing system is due to aggregation-induced emission (AIE) phenomenon formed by hydrogen bonds and π conjugation promoting the specific recognition of CTC by D-CDs. The linear detection varied from 0.98 to 143.67 ng mL^-1 with a low limit of detection (LOD) of 1.29 ng mL^-1 (R² = 0.998), which was lower than most reported in the literature. The D-CDs sensor was applied to detect CTC in spiked milk, blocked normal human serum, and fish samples with recoveries of 95.5-104.2% and relative standard deviations (RSDs) of 2.6%. Particularly, D-CDs based test papers with a smartphone were prepared for portable and visual detection of CTC by analyzing the various color changes of RGB of fluorescence color, with an LOD of 7.18 ng mL^-1 (R² = 0.9909). The fluorescence sensor designed in this work could be used as a rapid tool with high performance and selectivity for monitoring control in foods.

A Review on Carbon Dots: Synthesis, Characterization and Its Application in Optical Sensor for Environmental Monitoring

The development of carbon dots (CDs), either using green or chemical precursors, has inevitably led to their wide range application, from bioimaging to optoelectronic devices. The reported precursors and properties of these CDs have opened new opportunities for the future development of high-quality CDs and applications. Green precursors were classified into fruits, vegetables, flowers, leaves, seeds, stem, crop residues, fungi/bacteria species, and waste products, while the chemical precursors were classified into acid reagents and non-acid reagents. This paper quickly reviews ten years of the synthesis of CDs using green and chemical precursors. The application of CDs as sensing materials in optical sensor techniques for environmental monitoring, including the detection of heavy metal ions, phenol, pesticides, and nitroaromatic explosives, was also discussed in this review. This profound review will offer knowledge for the upcoming community of researchers interested in synthesizing high-quality CDs for various applications.

Simple synthesis of green luminescent N-doped carbon dots for malachite green determination

In this paper, novel N-doped carbon dots (N-CDs) were prepared from fuchsin basic and ethylenediamine tetraacetic acid-disodium salt (EDTA-2Na). The N-CDs were characterized by a series of techniques and it was found that the average particle size was 2.75 nm, and the surface had functional groups such as -NH₂ and -COOH. Interestingly, N-CDs exhibited a fast and sensitive response to malachite green (MG), which may be due to the inner filter effect (IFE). A method for the detection of MG in water samples from Jinyang Lake was developed using N-CDs, with a limit of detection (LOD) as low as 27.28 nM. Furthermore, N-CDs were utilized in the biological imaging of Arabidopsis thaliana.

A Rapid Tricolour Immunochromatographic Assay for Simultaneous Detection of Tricaine and Malachite Green

In this research, we designed a rapid tricolour immunochromatographic test strip with double test lines (TS-DTL) and two-colour AuNP probes, which realised the simultaneous detection of tricaine mesylate (TMS) and malachite green (MG). Through a distinct tricolour system (red T₁ line, blue T₂ line and purple C line), a visual identification of TMS (0.2 μg/mL) and MG (0.5 μg/mL) was quickly achieved on site, which improved the accuracy of naked eye observations. The LODs of TMS in aquaculture water, fish and shrimp were 11.0, 29.6 and 61.4 ng/mL, respectively. MG LODs were 47.0 ng/mL (aquaculture water), 82.8 ng/mL (fish) and 152.4 ng/mL (shrimp). The LOD of MG was close to the similar TS methods. However, visual detection of TMS could meet the requirements of the residue limit (1 μg/mL) of TMS in the USA, and the quantitative detection of TMS was over 16 times lower than the USA standard. The developed platform was rapid (~20 min, HPLC~3 h) and accurate, which was verified using a traditional HPLC method. The recovery rates ranged from 82.2% to 108.6% in three types of real samples, indicating a potential application in on-site fast screening or multiple detection for TMS and MG residues in aquatic products.

Green synthesis of fluorescent carbon nanospheres from chrysanthemum as a multifunctional sensor for permanganate, Hg(II), and captopril

A simple and green method for the synthesis of fluorescent carbon nanospheres (CNs) was proposed using chrysanthemum as a natural precursor and ethylenediamine as the co-reagent. The prepared CNs show strong blue fluorescence in water with quantum yield of 13.7 %, and distinguished fluorescent stability against photobleaching and ion strength. Meanwhile, the fluorescence signal of CNs is reversible and sensitive to temperature in the range of 20-80 °C, which makes CNs useful as a temperature sensor. More importantly, the CNs can serve as excellent fluorescent sensors for detecting MnO₄^- and Hg²⁺ with the detection limit of 0.72 and 0.26 μM, respectively. MnO₄^- quenches the fluorescence of CNs through inner filter effect and static quenching mechanism, while Hg²⁺ forms a stable complex with the amino group on the surface of CNs, resulting in the fluorescence quenching of CNs. However, the stronger affinity between Hg²⁺ and captopril (Cap) results in the fluorescence quenched by Hg²⁺ recovery after the addition of Cap. Thus, the CNs-Hg²⁺ system is employed as a novel sensitive and selective fluorescence "turn-on" sensor for Cap in the range of 0-75 μM. Inspired by the sensing results, the developed sensors were successfully used for the determination of MnO₄^-, Hg²⁺ in river water samples and Cap in the pharmaceutical and urine samples.

A portable smartphone-assisted ratiometric fluorescence sensor for intelligent and visual detection of malachite green

Developing intelligent, sensitive, and visual methods for rapidly detecting veterinary drug residues is essential for ensuring food quality and safety. A portable smartphone-assisted ratiometric fluorescent sensor was successfully designed using fluorescent Al-MOF nanosheet and rhodamine B (RhB) as fluorescent probes to adjust to the requirement of malachite green (MG) detection. The developed ratiometric fluorescent sensor allowed sensitive and selective detection of MG with good linear relationships in a wide range of 0.5-200 μg/mL. The Quantitative linearrange is 5.3 μg/mL to 200 μg/mL. The limit of detection (LOD) and limit of quantification (LOQ) were calculated to be 1.6 μg/mL and 5.3 μg/mL respectively. The practicability of the proposed method was verified using high performance liquid chromatography (HPLC) in spiked fish tissues with satisfying recoveries and RSD. Moreover, portable smartphone-assisted fluorescent test papers were fabricated for the intelligent detection of MG. This integration of smartphones and fluorescent test papers was economical and saved time, providing an alternative strategy for the qualitative discernment and semi-quantitative analysis of MG on-site.

Fluorescence "off-on" probe for lead (II) detection based on Atractylodes III CQDs and bioimaging

In this work, a type of carbon quantum dots (CQDs) with bright blue emission were readily fabricated through one-step hydrothermal treatment from Atractylodes III. We explored the surface morphology and optical properties of CQDs by Transmission electron microscope (TEM), X-ray diffraction patterns (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FT-IR) and UV-vis spectrophotometer. The obtained CQDs possessed good photoluminescence properties, water solubility and biocompatibility. The fluorescence quantum yield of them was 3.72%. It was found that the fluorescence intensity of CQDs will be quenched by picric acid (PA). After adding lead (II), the fluorescence can be effectively recovered. Hence, an "off-on" fluorescence probe was designed to detect lead (II) in the range of 0-580 μM and the limit of detection (LOD) was 0.068 μM. In the meanwhile, the experiments showed that the CQDs can be successfully used in bioimaging and as a hidden fluorescent ink.

Eco-green C, O co-doped porous BN adsorbent for aqueous solution with superior adsorption efficiency and selectivity

Toxic dyes in wastewater will become a significant hazard to human health if they are not treated effectively. Therefore, it is significant to separate and remove dyes from the aqueous solution. C and O co-doped BN (BCNO) with high adsorption capacity and outstanding cycle efficiency is a simple and efficient adsorbent for the cationic dye malachite green (MG). Glucose is characterized as an eco-friendly and cheap source of C and O. Benefited by the high specific surface area (1515.6 m²/g), the maximum adsorption capacity of MG is 1511.1 mg/g. Besides, the curves of adsorption fitting correspond to the Langmuir model and the pseudo-second-order model, respectively. Moreover, after 5 cycles, the adsorption efficiency reached 78% of the first time and the adsorption capacity remained above 780 mg/g. Furthermore, in the selectivity adsorption study, the cationic dyes (MG, neutral red (NR), methylene blue (MB)) can be removed more effectively in the binary dye system of MG-methyl orange (MO), NR-MO, MB-MO, MG-Orange II (OR), MB-OR, or NR-OR. BCNO-2 has a promising application in the removal of cationic dyes from complex dye wastewaters.

PVP–gold–copper nanocluster based NIR fluorescence probe for sensitive detection of malachite green

A novel NIR fluorescent probe based on PVP–Au/CuNCs has been developed, exhibiting good selectivity and stability for detecting malachite green (MG).

Orange-emissive N,S-co-doped carbon dots for label-free and sensitive fluorescence assay of vitamin B12

N,S-CDs with orange fluorescent emission were synthesized via a hydrothermal method using o-phenylenediamine and thiourea. A novel fluorometric method for the determination of VB12 based on the IFE was established.

Fluorescent sensing platform based on green luminescence carbon dots and AuNPs for clenbuterol detection in pork liver

In this paper, water-soluble green fluorescent carbon dots (G-CDs) were prepared using p-phenylenediamine and glutathione (GSH) as the precursors. The G-CDs exhibit excellent optical properties, and the maximum emission wavelength is located at 522 nm (under 410 nm excitation), which greatly overlaps with the absorption spectrum of AuNPs. Consequently, an effective “off–on” fluorescent sensing platform involved in G-CDs and AuNPs for detection of clenbuterol (CLB) was constructed. The fluorescence of G-CDs was strongly quenched by AuNPs due to the inner filter effect (IFE). As CLB was introduced, the quenched fluorescence intensity was recovered due to the specific interaction between the AuNPs and CLB. The recovered fluorescence intensity is linear to CLB concentration in the range of 13–270 ng mL⁻¹ with a low detection limit of 3.75 ng mL⁻¹. The prepared sensor has been successfully applied for CLB detection in pork liver and could be utilized in food analysis.

Carbon dots (G-CDs) with bright green fluorescence are synthesized by hydrothermal treatment of p-phenylenediamine and glutathione. Employing the G-CDs and AuNPs as sensing platform, a simple fluorescence sensor to detect clenbuterol was established.

A colorimetric and fluorescent dual-readout probe based on red emission carbon dots for nitrite detection in meat products

Nitrite (NO₂^-) is widely present in the human environment and accurate, sensitive and selective detecting of nitrite is of vital significance for food safety and water quality. Herein, a novel red emission carbon dots (r-CDs) fluorescent probe was fabricated for dual-mode detection of nitrite, which was capable of both convenient colorimetric analysis and accurate fluorometric detection. When NO₂^- is added to the rose-red r-CDs solution, NO₂^- interacts with the amino groups which on the surface of r-CDs to form diazotized substance, resulting in that the colorimetric color of r-CDs solution realizes the transition from rose red to light purple, and the red fluorescence is gradually quenched. The detection limits of colorimetric and fluorescence for NO₂^- were 0.193 μM and 0.149 μM, respectively. Furthermore, the dual-readout probe revealed satisfactory recovery and reliability when analyzing the concentration of NO₂^- in ham and bacon samples..

Fluorescent carbon dots from Indian Bael patra as effective sensing tool to detect perilous food colorant

Herein a simple strategy has been demonstrated for the synthesis of environmentally amiable and highly fluorescent carbon dots from the most useful plant of Indian classical Ayurveda i.e. Bael patra fruit. The morphological features and chemical composition of the prepared carbon dots were characterized through High resolution transmission electron microscopy, Field emission scanning electron microscopy and X-ray photoelectron spectroscopy. Owing to their highly emission nature, the applicability of carbon dots was tested against various food colorant i.e. Allura red. Under the optimized conditions, the decreased fluorescence intensity exhibited a good linear relationship with increasing concentration of Allura red. Additionally, an extensive research was carried out to determine the adsorption efficiency of carbon dots for Allura red and heavy metals. Based on the context, here we report the novelty of this work, demonstrating the decontamination of various samples from Allura red and heavy metals with the application of carbon dots.

Herbal medicine derived carbon dots: synthesis and applications in therapeutics, bioimaging and sensing

Since the number of raw material selections for the synthesis of carbon dots (CDs) has grown extensively, herbal medicine as a precursor receives an increasing amount of attention. Compared with other biomass precursors, CDs derived from herbal medicine (HM-CDs) have become the most recent incomer in the family of CDs. In recent ten years, a great many studies have revealed that HM-CDs tend to be good at theranostics without drug loading. However, the relevant development and research results are not systematically reviewed. Herein, the origin and history of HM-CDs are outlined, especially their functional performances in medical diagnosis and treatment. Besides, we sort out the herbal medicine precursors, and analyze the primary synthetic methods and the key characteristics. In terms of the applications of HM-CDs, medical therapeutics, ion and molecular detection, bioimaging, as well as pH sensing are summarized. Finally, we discuss the crucial challenges and future prospects.

One-Step Synthesis of Green Fluorescent Carbon Dots for Chloride Detecting and for Bioimaging

The chloride ion is an essential ion in organisms, which plays an important role in maintaining normal cell functions. It is involved in many cell activities, such as cell proliferation, cell excitability regulation, immune response, and volume regulation. Accurate detection of the chloride ion can balance its concentration in vivo, which is of great significance. In this study, we developed a green fluorescent carbon quantum dot to detect chloride concentration through the “off–on” mechanism. First, the fluorescence of carbon dots is quenched by the complex of sulfhydryl and silver ions on the surface of carbon dots. Then, the addition of chloride ions pulls away the silver ions and restores the fluorescence. The fluorescence recovery is linearly related to the concentration of chloride ions, and the limit of detection is 2.817 μM, which is much lower than those of other reported chloride probes. Besides, cell and zebrafish experiments confirmed the biosafety and biocompatibility of the carbon dots, which provided a possibility for further applications in bioimaging in vivo.

One-step synthesis of N, S-doped carbon dots with orange emission and their application in tetracycline antibiotics, quercetin sensing, and cell imaging

Water soluble N, S-doped carbon dots (N, S-CDs) with orange emission were synthesized from basic fuchsin and sulfosalicylic acid by the typical hydrothermal route. Based on the inner filter effect (IFE), the prepared N, S-CDs can be innovatively developed as an effective "signal-off" multifunctional sensing platform for sensitive determination of tetracycline antibiotics (for example, chlortetracycline (CTC)) and quercetin. The proposed sensor was utilized to realize the determination of CTC in water and milk samples and quercetin in beer sample (λex = 375 nm, λem = 605 nm) with satisfactory recoveries and relative standard deviations (RSD). The linear range and detection limit (LOD) of CTC is 1.24-165 μM and 32.36 nM, respectively. For quercetin, the linear ranges are 0.98-34 μM and 34-165 μΜ, and the LOD is 6.87 nM (3σ/m). By virtue of the good biocompatibility and long-wavelength emission, N, S-CDs were also used in the imaging of oocystis cells and yeast cells, which demonstrated promising applicability for bio-imaging and sensing. In this paper, N, S-doped carbon dots (N, S-CDs) with orange emission (λem = 605 nm) were synthesized from basic fuchsin and sulfosalicylic acid. Based on the inner filter effect (IFE), the prepared N, S-CDs can be innovatively developed as an effective "signal-off" multifunctional sensing platform for the sensing of tetracycline antibiotics (for example: chlortetracycline (CTC)) and quercetin. The sensor has been successfully applied to the determination of CTC in water and milk samples and quercetin in beer sample (λex = 375 nm, λem = 605 nm). The linear range and detection limit (LOD) of CTC is 1.24-165 μM and 32.36 nM respectively. For quercetin, the linear ranges are 0.98-34 μM and 34-165 μΜ, and the LOD is 6.87 nM (3σ/m). In addition, due to the characteristics of good biocompatibility and long-wavelength emission, the N, S-CDs were also used in the imaging of oocystis cells and yeast cells, which demonstrated promising applicability for bioimaging and sensing.

Towards Red Emissive Systems Based on Carbon Dots

Carbon dots (C-dots) represent an emerging class of nontoxic nanoemitters that show excitation wavelength-dependent photoluminescence (PL) with high quantum yield (QY) and minimal photobleaching. The vast majority of studies focus on C-dots that exhibit the strongest PL emissions in the blue/green region of the spectrum, while longer wavelength emissions are ideal for applications such as bioimaging, photothermal and photodynamic therapy and light-emitting diodes. Effective strategies to modulate the PL emission of C-dot-based systems towards the red end of the spectrum rely on extensive conjugation of sp2 domains, heteroatom doping, solvatochromism, surface functionalization and passivation. Those approaches are systematically presented in this review, while emphasis is given on important applications of red-emissive suspensions, nanopowders and polymer nanocomposites.

Sensitive and selective determination of tetracycline in milk based on sulfur quantum dot probes

A novel fluorescent probe based on sulfur quantum dots (SQDs) was fabricated for sensitive and selective detection of tetracycline (TC) in milk samples. The blue emitting SQDs were synthesized via a top-down method with assistance of H2O2. The synthesized SQDs showed excellent monodispersity, water solubility and fluorescence stability, with a quantum yield (QY) of 6.30%. Furthermore, the blue fluorescence of the obtained SQDs could be effectively quenched in the presence of TC through the static quenching effect (SQE) and inner filter effect (IFE) between TC and SQDs. Under the optimum conditions, a rapid detection of TC could be accomplished within 1 min and a wide linear range could be obtained from 0.1 to 50.0 μM with a limit of detection (LOD) of 28.0 nM at a signal-to-noise ratio of 3. Finally, the SQD-based fluorescent probe was successfully applied for TC determination in milk samples with satisfactory recovery and good relative standard deviation (RSD). These results indicate that the SQD-based fluorescent probe shows great potential in practical analysis of TC in real samples with high rapidity, selectivity, and sensitivity.

Blue/yellow emissive carbon dots coupled with curcumin: a hybrid sensor toward fluorescence turn-on detection of fluoride ion

Trace detection of fluoride ion has gained increasing attention due to fluoride's close association with biological and environmental processes. Herein, we construct a novel hybrid nanosystem consisting of carbon dots and curcumin for sensitive and selective sensing of F^-. Carbon dots are synthesized by hydrothermal treatment of 2,3-diaminopyridine and selenourea in hydrochloric acid. This material is employed as the fluorescent indicator that exhibits intense blue and yellow emission with quantum yields of 12% and 33%, respectively. Curcumin, possessing an absorption peak at 532 nm, can significantly quench the yellow fluorescence of carbon dots through inner filter effect. Curcumin is also used to specifically recognize F^-. When F^- is added, the curcumin-F^- complex generates, which leads to the hypochromatic shift of the absorption band from 532 to 430 nm. In such a case, the inner filter effect reduces, and yellow fluorescence of carbon dots recovers. Thus, a fluorescence turn-on sensor of F^- is built based on the carbon dots/curcumin system. The limits of detection and quantitation are measured to be 0.39 and 1.30 μM, respectively. For real usage, the proposed method is applied to determinate F^- in tap water and milk samples with relative standard deviations below 7.9%.

Visible Light Driven Photocatalytic Decolorization and Disinfection of Water Employing Reduced TiO2 Nanopowders

Defect-engineering of TiO2 can have a major impact on its photocatalytic properties for the degradation of persisting and non-biodegradable pollutants. Herein, a series of intrinsic and extrinsic defects are induced by post annealing of crystalline TiO2 under different reducing atmospheres. A detailed optoelectronic characterization sheds light on the key characteristics of the defect-engineered TiO2 nanopowders that are linked to the photocatalytic performance of the prepared photocatalysts. The photodegradation of a model dye, malachite green, as well as the inactivation of bacterial endospores of the Geobacillus stearothermophilus species were studied in the presence of the developed catalysts under visible light illumination. Our results indicate that a combination of certain defects is necessary for the improvement of the photocatalytic process for water purification and disinfection under visible light.