Sensing of mercury ions in Porphyra by Copper @ Gold nanoclusters based ratiometric fluorescent aptasensor

Recent progress in nanomaterial-based aptamers as biosensors for point of care detection of Hg2+ ions and its environmental applications

Among the foremost persistent heavy metal ions in the ecosystem, mercury (Hg2+) remains intimidating to the environment by producing a catastrophic effect on the environment as well as on mankind due to the exacerbation of anthropogenic activities. Therefore, it has become necessary to develop superlative techniques for its detection even at low concentrations. The conventional approaches for Hg2+ ions are quite laborious, and expensive, and require expertise in operating sophisticated instruments. To overcome these limitations, aptamer-based biosensors emerged as a promising tool for its detection. DNA-based aptamers have evolved as a significant technique by detecting them even in ppb levels. This review outlines the progress in aptamer-based biosensors from the year 2019-2023 by inducing changes in the electrochemical signal or by fluorescent/colorimetric approaches. The electrochemical sensors used nanomaterial electrodes for increasing the sensitivity whereas fluorescent and colorimetric sensors exhibit quenching or strong fluorescence in the presence of Hg2+ ions depending upon the prevailing mechanism or visible color changes. This perturbation in the signals could be attributed to the formation of the T-Hg2+ -T complex with the aptamers in the presence of ions revealing its real-time and biological applications in living or cancerous cells. Furthermore, next-generation biosensors are suggested to bring a paradigm shift to the integration of high-end smartphones, machine learning, artificial intelligence, etc.

AIE fluorescent nanozyme-based dual-mode biosensor for analysis of the bioactive component hypoxanthine in meat products

The development of facile, low-cost reliable, and precise onsite assays for the bioactive component hypoxanthine (Hx) in meat products is significant for safeguarding food safety and public health. Herein, we proposed a smartphone-assissted aggregation-induced emission (AIE) fluorogen tetraphenylethene (TPE)-incorporated amorphous Fe-doped phosphotungstates (Fe-Phos@TPE) nanozyme-based ratiometric fluorescence-colorimetric dual-mode biosensor for achieving the onsite visual detection of Hx. When the Hx existed, xanthine oxidase (XOD) catalyzed Hx into H2O2 to be further catalyzed into •OH by the prominent peroxidase activity of Fe-Phos@TPE at pH = 6.5, resulting in the oxidization of nonfluorescent o-phenylenediamine (OPD, naked-eye colorless) to be yellow fluorescent emissive 2,3-diaminophenazine (DAP, naked-eye dark yellow) at 550 nm as well as the intrinsic blue fluorescence of Fe-Phos@TPE at 440 nm to be decreased via inner-filter effect (IFE) action, thereby realizing a multi-enzyme cascade catalytic reaction at near-neutral pH to overcome the traditional acidity dependence-induced time-consuming and low sensitivity troublesome.

Mercury (II) sensing using a simple turn-on fluorescent graphene oxide based aptasensor in serum and water samples

A simple, highly sensitive, and selective fluorometric aptasensing platform based on aptamer and graphene oxide (GO) is proposed for the determination of mercury (II) ion (Hg2+). In the designed assay, two aptamer probes, a carboxy-fluorescein (FAM) labeled aptamer (aptamer A) and its complementary (aptamer B) with partial complement containing several mismatches and GO as the quencher were used. In the absence of Hg2+, both A and B aptamers were adsorbed on the surface of GO by π-π-stacking, leading to fluorescence quenching of FAM due to fluorescence resonance energy transfer (FRET). Upon exposure to Hg2+, the A and B aptamer strands bind Hg2+ and form T-Hg2+-T complexes, leading to the formation of a stable double-stranded aptamer. The double-stranded aptamer is detached from the GO surface, resulting in the recovery of FAM fluorescence. The fluorescence intensity (FI) of the developed sensor was correlated with the Hg2+ concentration under optimized experimental conditions in two wide linear ranges, even in the presence of 10 divalent cations as interferences. The linear ranges were obtained from 200.0 to 900.0 fM and 5.0 to 33.0 pM, a limit of detection (LOD) of 106.0 fM, and a limit of quantification (LOQ) of 321.3 fM. The concentration of Hg2+ was determined in five real samples containing three water and two serum samples, using spiking and standard addition methods and the results were compared with the spiked amounts and atomic absorption (AAS) as standard method respectively, with acceptable recoveries. Furthermore, in the standard addition method, to overcome the effects of matrix influence of real samples in quantitative predictions, the excitation-emission matrix (EEM) data for samples was simultaneously analyzed by multivariate curve resolution with alternating least squares (MCR-ALS) as a second-order standard addition method (SOSAM).

Xanthan gum-capped Chromia Nanoparticles (XG-CrNPs): A promising nanoprobe for the detection of heavy metal ions

The present study reports on the selective and sensitive detection of metals using xanthan gum-capped chromia nanoparticles (XG-CrNPs). The nanoparticles were synthesized by the chemical reduction method using sodium borohydride and xanthan gum as the reducing and capping agents, respectively. The synthesis of XG-CrNPs was confirmed by the appearance of the two absorption peaks at 272 nm and 371 nm in the UV-visible region. The nanoparticles have been extensively characterized by FTIR, TEM-EDX, XRD, and TGA analyses. The well-dispersed XG-CrNPs exhibited a quasi-spherical structure with an average particle size of 3 nm. A significantly low amount (2 μg/L) of XG-CrNPs was used for selective and sensitive detection of heavy metal ions. It showed excellent metal detecting properties by quenching its band gap signal which was extraordinarily conspicuous for Co(II), Hg(II), and Cd(II) in comparison to other metal ions like Ag(I), Ba(II), Mg(II), Mn(II), Ni(II), and Zn(II). The limit of detection of Co(II), Cd(II), and Hg(II) with this nanoprobe was found to be 2.167 μM, 1.065 μM, and 0.601 μM respectively. The nanoparticles manifested higher shelf-life and can be reused up to three consecutive cycles where most of its activity was conserved even after being used. Thus, it may find use in metal sensor devices for the detection of hazardous metals.

A portable smartphone-assisted Tb-MOF-based agar-slice probe for the rapid and on-site fluorescence assay of malachite green in aquatic products

In this study, a new Tb-MOF fluorescence probe was developed for the detection of malachite green (MG) in real aquatic products. Fluorescence sensing experiments revealed that MG can effectively quench the green fluorescence of Tb-MOF suspensions, and the detection process exhibits the advantages of high sensitivity, a wide linear range (0-80 μM), a low detection limit (10.8 nM) and a rapid response time. Selective detection of MG is achieved primarily through fluorescence resonance energy transfer (FRET) and photoinduced electron transfer (PET) mechanisms. Furthermore, a smartphone-assisted Tb-MOF-based agar slice detection platform was constructed for the visual and quantitative detection of MG. Additionally, the on-site detection of MG in crucian and shrimp samples was accomplished with high recoveries (99.8 %-107.99 %) and low relative standard deviations (RSD < 2.2 %). This developed detection platform introduced a low-cost, portable and user-friendly approach for MG detection.

Ratiometric fluorescence detection of Hg2+ based on gold nanocluster/carbon quantum dots nanohybrids

Ratiometric fluorescence sensing methods are widely used in analysis and detection due to their high sensitivity and stability. In this work, a ratiometric fluorescence method for sensitive detection of Hg2+ was established using a gold nanoclusters/carbon quantum dots (AuNCs/CQDs) nanohybrid probe. The AuNCs/CQDs nanohybrids probe were simply constructed by mixing blue-light-emitting gold nanoclusters (AuNCs) with an orange-emissive carbon quantum dots (CQDs). The probe had two fluorescence emission peaks at 434 nm and 561 nm when the excitation wavelength was 375 nm. With the addition of Hg2+, the fluorescence at 434 nm decreased and the fluorescence at 561 nm remained unchanged; the fluorescence intensity ratio Δ(F434/F561) and Hg2+ concentration have a good linear relationship in the range of 8.32 × 10-7 to 7.69 × 10-5 mol L-1, and the limit of detection (LOD) is 3.58 × 10-7 mol L-1. The method was applied in the detection of Hg2+ in cosmetics and wastewater, and has potential applications for detecting Hg2+ in other samples.

Aptamer functionalized gold nanoclusters as an emerging nanoprobe in biosensing, diagnostic, catalysis and bioimaging

DNA nanostructures, with their fascinating luminescent and detecting capabilities, provide a basis that can accommodate a wide range of applications. The unique electronic configurations, and physical and chemical properties of aptamer-assembled gold nanoclusters (apt-AuNCs) as a novel type of fluorophore have gradually piqued the interest of the scientific community. Bending DNA sequences and other templates/legends as a stabilizing agent with Au metal has produced an abundance of biosensors, along with catalytic and imaging properties. This review article summarizes the synthesis, conjugation tactics, advantages, and sensing mechanisms of AuNCs aptasensor after providing a brief introduction to the topic. Moreover, the application of DNA/aptamer functionalization has been briefly discussed in the fields of food safety and quality, catalysis, clinical diagnosis, cancer cell bioimaging, detection of cancer cell indicators, and therapy. We also concluded the current obstacles and made recommendations about the future prospects of AuNCs for fundamental research and applications in line with the developments in DNA/aptamer-AuNCs.

Nanomaterials-based aptasensors: An efficient detection tool for heavy-metal and metalloid ions in environmental and biological samples

In light of potential risks of heavy metal exposure, diverse aptasensors have been developed through the combination of aptamers with nanomaterials for the timely and efficient detection of metals in environmental and biological matrices. Aptamer-based sensors can benefit from multiple merits such as heightened sensitivity, facile production, uncomplicated operation, exceptional specificity, enhanced stability, low immunogenicity, and cost-effectiveness. This review highlights the detection capabilities of nanomaterial-based aptasensors for heavy-metal and metalloid ions based on their performance in terms of the basic quality assurance parameters (e.g., limit of detection, linear dynamic range, and response time). Out of covered studies, dendrimer/CdTe@CdS QDs-based ECL aptasensor was found as the most sensitive option with an LOD of 2.0 aM (atto-molar: 10-18 M) detection for Hg2+. The existing challenges in the nanomaterial-based aptasensors and their scientific solutions are also discussed.

Ultrasensitive detection and efficient removal of mercury ions based on covalent organic framework spheres with double active sites

In present work, a new spherical covalent organic framework (TFPB-APTU COF) with good photoelectric property and double active sites (secondary amine (-NH-) group and sulfur (S) atom) was prepared for ultrasensitive detection and efficient removal of mercury ions (Hg2+). The -NH- group and S atom can capture free Hg2+ by coordination and chelation interaction, and the related steric hindrance effect reduces the photocurrent signal of the TFPB-APTU COF, resulting in the highly sensitive photoelectrochemical analysis of Hg2+ with a wide linear response range (0.01-100000 nM) and low detection limit (0.006 nM). On the other hand, the developed TFPB-APTU COF has large removal capacity (2692 mg g-1), good regeneration capability, and high removal speed for Hg2+ removal based on the double active sites (-NH- group and S atom), large specific surface area and porous spherical structure. The developed TFPB-APTU COF spheres show great potential in monitoring and treatment of environmental pollution of Hg2+.

A fluorescent probe based on aptamer gold nanoclusters for rapid detection of mercury ions

The mercuric ion (Hg2+) is a hazardous pollutant that is widely distributed in living organisms, foods, and environments with highly toxic and bio-accumulative properties. In the present study, a fluorescent probe based on aptamer gold nanoclusters (apt-AuNCs) was prepared for the ultrasensitive detection of Hg2+ in food. The principle underlying the prepared probe was the quenching of the fluorescence of apt-AuNCs in the presence of Hg2+ due to the strong metallophilic interactions between the 5d10 centers of Hg2+ and Au+. Under optimal conditions, the proposed fluorescent probe exhibited a linear relationship with Hg2+ concentration within the range of 2-200 nM (R2 = 0.9960). In addition, the limit of detection (LOD) was 0.0158 nM, which is below the Chinese standard value of 25 nM for Hg2+ in food. Furthermore, the apt-AuNCs were applied to detect Hg2+ in spinach and crawfish samples, with recovery percentages of 91.99%∼108.06%, meaning that apt-AuNCs could be used as a promising probe to detect Hg2+ in complex food samples.

A fluorescent probe based on an enhanced ICT effect for Hg2+ detection and cell imaging

The mercury ion (Hg²⁺) has hindered society to some extent due to its high biological toxicity, and a rapid method for Hg²⁺ detection is urgently needed. In the present work, two fluorescent probes, YF-Hg and YF-Cl-Hg, were developed. YF-Cl-Hg was produced by introducing an electron-withdrawing substituent (-Cl) into the structure of YF-Hg. The probe YF-Cl-Hg possesses a larger Stokes shift and a more pronounced UV-vis absorption redshift compared to YF-Hg in a pH = 7.4 environment. The reasons for the superior spectral performance of YF-Cl-Hg over YF-Hg were explored by density functional theory (DFT) calculations and UV-vis absorption spectroscopy. Furthermore, the good biocompatibility suggests that YF-Cl-Hg possesses the potential to be a tool for Hg²⁺ detection in cells.

A dual-modal biosensor coupling cooperative catalysis strategy for sensitive detection of AFB1 in agri-products

Herein, the cooperative catalysis effect between nanocomposite (AgPd NPs/POD-M/PEI-rGO) and horseradish peroxidase (HRP) was applied for the fast and sensitive detection of aflatoxin B1 (AFB₁). Upon specific and competitive binding of HRP@DNA and AFB₁ to cDNA, the working electrode presented different catalytic capacities for supporting electrolytes (TMB and H₂O₂). In the redox mechanism of TMB and H₂O₂, HRP and nanocomposite effectively catalyzed the oxidization of TMB to form the one-electron oxidation intermediate TMB+, and contributed the electrical signals and absorbance signals. Electrochemistry and colorimetric analyses were successfully realized for AFB₁ detection with 0.2 pg/mL and 8 pg/mL of detection limits, respectively, which is much lower than that of traditional HPLC methods. Overall, this method had significant reliability and sensitivity, offering a promising potential for conveniently evaluating the quality of agri-products polluted with AFB₁. Moreover, this approach provides a new idea for fast and accurate detection of mycotoxin.

Coal humus acid functionalized high stability fluorescent copper nanoclusters for tumor identification by sequential off-on-off monitoring tryptophan and Hg2

The abnormalities of Tryptophan (Trp) and mercury ions (Hg²⁺) not only easily activate diseases, including mental illness and cancer, but also seriously affect human wellbeing. Fluorescent sensors are profoundly attractive options for identifying amino acids and ions; however, most sensors remain challenging due to the multipliable cost and deviation from the asynchronous quenching detection. In particular, fluorescent copper nanoclusters with high stability that quantitatively monitoring Trp and Hg²⁺ successively have seldom been reported. Herein, we employ coal humus acid (CHA) as a protective ligand and successfully construct weak cyan fluorescent copper nanoclusters (CHA-CuNCs) by a rapid, environmentally benign and cost-effective method. Significantly, the fluorescence of CHA-CuNCs is obviously improved by introducing Trp, because the indole group of Trp enhances the radiative recombination and aggregation-induced emissions. Interestingly, CHA-CuNCs not only realizes the highly selective and specific detection of Trp with a linear range of 25-200 μM and a detection limit of 0.043 μM based on the turn-on fluorescence strategy, but also quickly achieves the consecutive turn-off detection of Hg²⁺ due to the chelation interaction between Hg²⁺ and pyrrole heterocycle in Trp. Moreover, this method is successfully applied in the analysis of Trp and Hg²⁺ in real samples. Furthermore, the confocal fluorescent imaging of tumor cells demonstrates that CHA-CuNCs can be used for bioimaging and cancer cell recognition with Trp and Hg²⁺ abnormalities. These findings provide new guidance for the eco-friendly synthesis of CuNCs with eminent sequential off-on-off optical sensing property, indicating good prospects in biosensing and clinical medicine applications.

Real-time monitoring of mercury(II) in water and food samples using a quinoline-based ionic probe

Herein, a novel ionic fluorescent probe for mercury(II) detection is presented consisting of a functional quinoline-based IL. Interestingly, the probe displayed high sensitivity (0.8 nM) and selectivity through the regulation function of electrostatic attraction, where its performance was significantly superior to that of quinoline probes without negative charge. Furthermore, the probe was found to exhibit two different fluorescent signals and colorimetric signals in the presence of different concentrations of mercury(II), which was consistent with the reaction mechanisms of the generation of large conjugated systems and the formation of anion-mercury(II) complexes. Moreover, this probe could be further loaded on a simple filter paper to serve as a visual paper sensor due to its adequate response time of less than 5 s. This regulation function strategy of electrostatic attraction has excellent potential for use in the precise detection of targeted analytes in real complex samples with improved accuracy and selectivity.

The first fluorescent sensor for the detection of closantel in meat

Closantel is widely used in the management of parasitic infestation in livestock, but is contraindicated in humans due to its high toxic to human retina. Thus, development of a fast and selective method for the detection of closantel residues in animal products is highly needed yet still challenging. In the present study, we report a supramolecular fluorescent sensor for closantel detection through a two-step screening process. The fluorescent sensor can detect closantel with a fast response (<10 s), high sensitivity, and high selectivity. The limit of detection is 0.29 ppm, which is much lower than the maximum residue level set by government. Moreover, the applicability of this sensor has been demonstrated in commercial drugs tablets, injection fluids, and real edible animal products (muscle, kidney, and liver). This work provides the first fluorescence analytical tool for accurate and selective determination of closantel, and may inspire more sensor design for food analysis.

A novel ratiometric fluorescent probe for sensitive detection of jasmonic acid in crops

Herein, a novel ratiometric fluorescent probe was proposed for sensitive detection of jasmonic acid (JA) based on NCQDs@Co-MOFs@MIPs. The prepared NCQDs, with uniquely dual-emissive performance, are insensitive to JA due to electrostatic repulsion. Interestingly, the introduction of Co-MOFs not only avoided the self-aggregation of NCQDs, but changed the surface charge of NCQDs and triggered the response of NCQDs to JA. More importantly, the imprinted recognition sites from MIPs provided "key-lock" structures to specifically capture JA molecules, greatly improving the selectivity of the probe to JA. Under the synergistic actions of Co-MOFs and MIPs, JA can interact with NCQDs through photo-induced electron transfer (PET), resulting in the changes on emission intensity of the probe at E_m = 367 nm and 442 nm. Based on the observations, the quantification of JA was realized in the range of 1-800 ng/mL with the limit of detection (LOD) of 0.35 ng/mL. In addition, the probe was used for detecting JA in rice with satisfactory analysis results, indicating the probe holds great potential for monitoring JA levels in crops. Overall, this strategy provides new insights into the construction of practical probes for sensitive detection of plant hormones in crops.

A smartphone-assisted down/up-conversion dual-mode ratiometric fluorescence sensor for visual detection of mercury ions and l-penicillamine

Establishment of a rapid, sensitive, visual, accurate and low-cost fluorescence detection system to detect multiple targets was of great significance in food safety evaluation, ecological environment monitoring and human health monitoring. In this work, a smartphone-assisted down/up-conversion dual-mode ratiometric fluorescence sensor was proposed based on metal-organic framework (NH₂-MIL-101(Fe)) and CdTe quantum dots (CdTe QDs) for visual detection of mercury ions (Hg²⁺) and L-penicillamine (L-PA), in which NH₂-MIL-101(Fe) was used as the reference signal and CdTe QDs was used as the response signal. The down-conversion fluorescence system at excitation wavelength of 300 nm (ex: 330 nm) was used to detect Hg²⁺ and L-PA, in which the detection limit of Hg²⁺ was 0.053 nM with the fluorescence color changed from green to blue, and the detection limit of L-PA was 1.10 nM with the fluorescence color changed from blue to green. Meanwhile, the up-conversion fluorescence system at excitation wavelength of 700 nm (ex: 700 nm) was used to detect Hg²⁺ and L-PA. The detection limits of Hg²⁺ and L-PA were 0.11 nM and 2.93 nM, respectively. The detection of Hg²⁺ and L-PA were also carried out based on the color extraction RGB values identified by the smartphone with a detection limit of 0.091 nM for Hg²⁺ and 8.97 nM for L-PA. In addition, the concentrations of Hg²⁺ and L-PA were evaluated by three-dimensional dynamic analysis in complex environments. The smartphone-assisted down/up-conversion dual-mode ratiometric fluorescence sensor system provides a new strategy for detection Hg²⁺ and L-PA in food safety evaluation, environmental monitoring and human health monitoring.

Ratiometric fluorescent detection of sulfide ions in Radix Codonopsis and living cells based on PVP-supported gold/copper nanoclusters with tunable dual emission

Herein, a novel fluorometric-sensor with dual-emission system was constructed on the basis of polyvinylpyrrolidone (PVP) and 2-mercaptobenzothiazole (MBT) co-functionalized gold/copper nanoclusters (PVP/MBT-Au@CuNCs) by a facile and eco-friendly one-pot approach. The sensor exhibited ratiometric fluorescence emission (F_{590 nm}/F_{422 nm}) for visual and selective detection of S^2- with a sensitive detection limit of 11.9 nM. Besides, fluorescence quenched sensing of S^2- was chalked up by a quickly selectivity monitoring time of 30 s, owing to the strongly binding of Cu₂S and Au₂S by hard-soft-acid-base theory and the destruction of the aggregated structure of PVP/MBT-Au@CuNCs. Furthermore, the platform also provided the portable analysis for visual detection of S^2- by capturing the change in fluorescence color with a single dual-emissive ratiometric paper strip. It is worth mentioning that the fluorescent gold-copper nanoclusters showed excellent application activities in the selective detection of S^2- in Radix Codonopsis or Tremella samples and recognition of S^2- in HeLa cells or macrophages by confocal microscopy fluorescent imaging. Overall, the sensing system paved a new avenue for effectively developing a convenient ratiometric fluorescent sensor platform for evaluating the safety of food with S^2- pollution in environment and biological system.

Aptamer-based NanoBioSensors for seafood safety

Chemical and biological contaminants are of primary concern in ensuring seafood safety. Rapid detection of such contaminants is needed to keep us safe from being affected. For over three decades, immunoassay (IA) technology has been used for the detection of contaminants in seafood products. However, limitations inherent to antibody generation against small molecular targets that cannot elicit an immune response, along with the instability of antibodies under ambient conditions greatly limit their wider application for developing robust detection and monitoring tools, particularly for non-biomedical applications. As an alternative, aptamer-based biosensors (aptasensors) have emerged as a powerful yet robust analytical tool for the detection of a wide range of analytes. Due to the high specificity of aptamers in recognising targets ranging from small molecules to large proteins and even whole cells, these have been suggested to be viable molecular recognition elements (MREs) in the development of new diagnostic and biosensing tools for detecting a wide range of contaminants including heavy metals, antibiotics, pesticides, pathogens and biotoxins. In this review, we discuss the recent progress made in the field of aptasensors for detection of contaminants in seafood products with a view of effectively managing their potential human health hazards. A critical outlook is also provided to facilitate translation of aptasensors from academic laboratories to the mainstream seafood industry and consumer applications.

S,N-rich luminous covalent organic frameworks for Hg2+ detection and removal

The challenge for simultaneous detection and removal of Hg²⁺ is the design of bifunctional materials bearing abundant accessible chelating sites with high affinity. Covalent-organic frameworks (COFs) are attracting more and more attention as potential bifunctional materials for Hg²⁺ detection due to their large specific surface area, ordered pores, and abundant chelating sites. Here, a new luminous S,N-rich COF_BTT-AMPD based on hydrophilic block unit of 2,2'-azobis(2-methylpropionamidine) dihydrochloride (AMPD) was constructed, which improved the solubility and affinity for Hg²⁺ greatly. Another S-rich fused-ring unit of benzotrithiophene tricarbalaldehyde (BTT) enhanced the conjugation of COF_BTT-AMPD, and the methyl-rich chains block unit of AMPD effectively suppressed the aggregation-caused quenching. Thus, the COF_BTT-AMPD emitted strong fluorescence at 546 nm in liquid and solid as well as different solvent with a wide pH range, which was used for the visual detection and removal of Hg²⁺ (detection limit: 2.6 nM, linear range: 8.6 × 10^-3-20 μM, monolayer adsorption capacity: 476.19 mg g^-1) successfully. COF_BTT-AMPD-based fabric and light-emitting diode coatings were further constructed to realize the visual detection of Hg²⁺ vapor. The results reveal the potential of S,N-rich luminous COF_BTT-AMPD for Hg²⁺ detection and remediation in the environment.

Detection of Heavy Metal Ions by Ratiometric Photoelectric Sensor

In recent years, heavy metal pollution has become increasingly serious. Heavy metals exist in an environment mainly in the form of ions (heavy metal ions, HMs). They can contaminate food, water, soil, and the atmosphere, leading to serious harm to plants and animals. With high bioavailability and nonbiodegradability, HMs can accumulate through biomagnification. Consequently, heavy metal pollution has become the cause of many fatal diseases threatening human health and ecological environment. Therefore, the accurate detection of HMs is vital and necessary. In this paper, the harm and limit standards of heavy metals were systematically summarized and the common analysis methods were overviewed and compared. Specifically, the latest research progress of ratiometric photoelectric sensor, including optical and electrical sensor, were mainly described. The research status and advantages and disadvantages of a photoelectric sensor were summarized. Furthermore, the future directions were proposed, which provided the reference for the further research and application of the ratiometric photoelectric sensor.

Heavy Metal Ions Detection Using Nanomaterials-Based Aptasensors

Heavy metals ions as metallic pollutants are a growing global issue due to their adverse effects on the aquatic ecosystem, and human health. Unfortunately, conventional detection methods such as atomic absorption spectrometry exhibit a relatively low limit of detection and hold numerous disadvantages, and therefore, the development of an efficient method for in-situ and real-time detection of heavy metal residues is of great importance. The aptamer-based sensors offer distinct advantages over antibodies and emerged as a robust sensing platform against various heavy metals due to their high sensitivity, ease of production, simple operations, excellent specificity, better stability, low immunogenicity, and cost-effectiveness. The nucleic acid aptamers in conjugation with nanomaterials can bind to the metal ions with good specificity/selectivity and can be used for on-site monitoring of metal ion residues. This review aimed to provide background information about nanomaterials-based aptasensor, recent advancements in aptamer conjunction on nanomaterials surface, the role of nanomaterials in improving signal transduction, recent progress of nanomaterials-based aptasening procedures (from 2010 to 2022), and future perspectives toward the practical applications of nanomaterials-based aptasensors against hazardous metal ions for food safety and environmental monitoring.

Smartphone based aptasensors as intelligent biodevice for food contamination detection in food and soil samples: Recent advances

Nowadays, the integration of conventional analytical approaches with smartphones has been developed novel, emerging and affordable devices for improving on-site detection platforms in the fields of food safety. Smartphone-based aptasensors as the next generation of portable aptasensing technique has attracted considerable attention as it offers a semi-automated user interface that can be exploited by inexpert characters. Wireless data transferability is an undeniable advantage that home-testing platforms have as well as it can suggest high computational power. In addition, these types of biodevices can provide real-time monitoring in terms of exchanging digital networks in real-time. To elaborate, the ability of smartphones to connect through the Internet is one of the most critical advantages of smartphone-based aptasensor that can be uploaded to Cloud databases and results can be disseminated as spatio-temporal maps across the globe. This review focused on the recent progress and technical breakthroughs of aptasensor on the smartphone as a groundbreaking enterprise in the field of biochemical analysis, importantly in the aspect of the combination of different types of biosensors including electrochemical, optical and colorimetric. In our opinion, this review can broaden our understanding of using smartphones as a portable sensing approach by addressing the current challenges and future perspectives.

A review of spectroscopic probes constructed from aptamer-binding gold/silver nanoparticles or their dimers in environmental pollutants' detection

The issue of environmental pollutant residues has gained wide public attention all along. Therefore, it is necessary to develop simple, rapid, economical, portable, and sensitive detection techniques, which have become the focus of research in the pollutants detection field. Spectroscopy is one of the most convenient, simple, rapid, and intuitive analytical tools that can provide accurate information, such as ultraviolet spectroscopy, fluorescence spectroscopy, Raman spectroscopy, plasmon resonance spectroscopy, etc. Gold nanoparticles, silver nanoparticles, and their dimers with unique optical properties are commonly used in the construction of spectroscopic probes. As a class of oligonucleotides that can recognize specific target molecules, aptamers also have a strong ability to recognize small-molecule pollutants. The application of aptamer-binding metal nanoparticles in biosensing detection presents significant advantages for instance high sensitivity, good selectivity, and rapid analysis. And many spectroscopic probes constructed by aptamer-binding gold nanoparticles, silver nanoparticles, or their dimers have been successfully demonstrated for detecting pollutants. This review summarizes the progress, advantages, and disadvantages of aptamer sensing techniques constructed by visual colorimetric, fluorescence, Raman, and plasmon resonance spectroscopic probes combining gold/silver nanoparticles or their dimers in the field of pollutants detection, and discusses the prospects and challenges for their future.

Recent advances in the visual detection of ions and molecules based on gold and silver nanoclusters

Gold and silver nanoclusters (Au/AgNCs) exhibit excellent application potential in optical biosensors because of their low toxicity, excellent biocompatibility, and unique optical properties. Au/AgNCs-based visual analysis methods have emerged as powerful tools for detecting various targets with convenient readout. In this review, the applications of Au/AgNCs in the visual detection and bioimaging of metal ions, inorganic anions, small molecules, and biomacromolecules in various devices are summarized. Furthermore, this review also discusses the future perspectives of the field.

A ratiometric electrochemical strategy based on Fe (III) and Pt (IV) for immobilization-free detection of Escherichia coli

A new ratiometric electrochemical strategy for immobilization-free detection of Escherichia coli (E. coli) was constructed by using a capture DNA-polyaniline/copper ferrite nanoparticles/graphene oxide (cDNA-PANI/CuFe₂O₄/GO) composite as capture probes, which has a high specific surface area and good magnetic properties. Then trigger DNA/Au nanoparticles (tDNA/Au NPs) were used as signal amplification labels, and Pt (IV) and Fe (III) were chosen as the signal probes. In the presence of targets, the sandwich format among cDNA-PANI/CuFe₂O₄/GO, E. coli and auxiliary DNA (aDNA) was realized by using the aptamer recognition system. Then, the tDNA/Au binding could be anchored on the sandwich format due to the principle of base complementation between unpaired aDNA and tDNA. And the unbounded tDNA of tDNA/Au NPs could bind an amount of Pt (IV). After separation using a magnet, a handful of unbound Pt (IV) which remained in the supernatant reacted with a large number of Fe (III) ions, leading to a markedly increased I_Fe(III)/I_Pt(IV) value. Oppositely, the sandwich format could not appear in the absence of targets, and even the tDNA/Au could not be immobilized on it. So, the redox reaction between a large amount of Pt (IV) residue in the supernatant and Fe (III) was significantly successful, causing a low I_Fe(III)/I_Pt(IV) value. Under optimal conditions, we found that I_Fe(III)/I_Pt(IV) was linearly related to the logarithmic E. coli concentration with a low limit of detection (1.862 × 10³ cfu mL^-1). This devised ratiometric electrochemical method may develop into a powerful and effective means for the detection of E. coli in real samples, which may also be developed as a universal tool for another microorganism.

Au NP-Decorated g-C3N4-Based Photoelectochemical Biosensor for Sensitive Mercury Ions Analysis

Herein, an efficient and feasible photoelectrochemical (PEC) biosensor based on gold nanoparticle-decorated graphitic-like carbon nitride (Au NPs@g-C₃N₄) with excellent photoelectric performance was designed for the highly sensitive detection of mercury ions (Hg²⁺) . The proposed Au NPs@g-C₃N₄ was first modified on the surface of the electrode, which possessed a remarkable photocurrent conversion efficiency and could produce a strong initial photocurrent. Then, the thymine-rich DNA (S1) was immobilized on the surface of the modified electrode via Au-N bonds. Subsequently, 1-hexanethiol (HT) was added to the resultant electrode to block nonspecific binding sites. Finally, the target Hg²⁺ was incubated on the surface of the modified glassy carbon electrode (GCE). In the presence of target Hg²⁺, the thymine-Hg²⁺-thymine (T-Hg²⁺-T) structure formed due to the selective capture capability of thymine base pairs toward Hg²⁺, resulting in the significantly decrease of the photocurrent. Thereafter, the proposed PEC biosensor was successfully used for sensitive Hg²⁺ detection, as it possessed a wide linear range from 1 pM to 1000 nM with a low detection limit of 0.33 pM. Importantly, this study demonstrates a new method of detecting Hg²⁺ and provides a promising platform for the detection of other heavy metal ions of interest.

Rapid Trace Detection of Pesticide Residues on Tomato by Surface-Enhanced Raman Spectroscopy and Flexible Tapes

The non-judicious use of pesticides in agro-food poses a severe threat to food safety and human health. As an emerging chromatographic fingerprint provider, surface-enhanced Raman spectroscopy analysis (SERS) sheds bright light on sensitive and nondestructive detection of pesticide residues. This research proposed a novel strategy to detect three-pesticide residues (thiabendazole, carbendazim, and chlorpyrifos) on tomato peel based on the flexible and sticky SERS substrate. After selecting the best commercial adhesive tape (3M9080), the SERS substrate was constructed by optimizing the parameters in the preparation process of AuNPs. Therefore, a new simple “tape-wrapped SERS” way for pesticide residue analysis was established with a simple procedure of “absorption, separation, and drop addition.” Based on chemometrics method, the limit of semiquantitative detection was 20, 36, and 80 ng/cm2 for thiabendazole, carbendazim, and chlorpyrifos, respectively, on tomato surface, which indicated that the proposed method could meet the requirement of actual application with a large prospect in agro-food safety detection.

Ultrasmall Gold Nanoclusters-Enabled Fabrication of Ultrafine Gold Aerogels as Novel Self-Supported Nanozymes

Metal aerogels represent an emerging type of functional porous materials with promising applications in diverse fields, but the fabrication of metal aerogels with specific structure and property still remains a challenge. Here, the authors report a new approach to fabricate metal aerogels by using ultrasmall metal nanoclusters (NCs) as functional building blocks. By taking D-penicillamine-stabilized gold NCs (AuNCs) with a diameter of 1.4 nm as an example, Au aerogels with ultrafine ligament size (3.5 nm) and good enzyme-mimic properties are synthesized. Detailed characterization shows that the obtained Au aerogels possess typical 3D self-supported porous network structure with high gold purity and surface area. Time-lapse spectroscopic and microscopic monitoring of the gelation process reveal that these ultrasmall AuNCs first grow into large nanoparticles before fusion into nanowire networks, during which both pH and the precursor concentration are identified to be the determining factor. Owing to their highly porous structure and abundant metal nodes, these self-supported Au aerogels display excellent peroxidase-like properties. This work provides a strategy for fabricating advanced metal aerogels by taking ultrasmall-sized metal NCs as building blocks, which also opens new avenues for engineering the structure and properties of metal aerogels for further advancing their applications.

The ultrathin palladium nanosheets for sensitive and visual Hg2+ detection in the food chain

The detection of mercury, one of the ten most dangerous chemicals, is significant to provide helpful information for assessing mercury toxicity and health risks. However, it is a challenge to explore simple, sensitive, accurate, and cheap Hg²⁺ detection methods. Noble metal nanomaterials are used for Hg²⁺ detection by the colorimetric method widely. Still, the pure noble metal materials' detection limit of Hg²⁺ is high, and sensitivity enhancement usually requires further complex modification. Here, we use a facile one-step route to synthesize ultra-thin two-dimensional palladium nanosheets (PdNS), which have high selectivity and sensitivity for Hg²⁺ detection by colorimetric method with a low detection limit (0.55 ppb). The detection of Hg²⁺ by PdNS involves multiple mechanisms, including the formation of amalgam and PdO to improve the peroxidase-mimic activity of PdNS and PdNS motor function to increase its collision probability with the detection reactant. The PdNS can be used to detect Hg²⁺ in various actual samples. The detection results are highly consistent with the data obtained by the atomic fluorescence spectrometer (AFS). Then, we developed a Hg²⁺ detection kit, which can realize simple, sensitive, and accurate Hg²⁺ detection by naked eye or cellphone at a meager cost (0.3 dollars each sample).

Rapid, ultrasensitive, highly selective detection of toxic Hg(II) ions in seabass, swordfish and water samples

A novel fluorescent probe bearing triphenylamine, thiophene and thiosemicarbazide (TPA-TSC) was developed, and its distinct features were investigated. TPA-TSC demonstrated excellent selectivity towards Hg²⁺ ions, with a limit of detection (0.14 nM) among the lowest reported to date. It also exhibited a turn-off response by forming stable complex for a brief period (<30 s). Job plot analysis and high-resolution mass spectrometry (HRMS) revealed that TPA-TSC bound to Hg²⁺ with a 2:1 stoichiometry in an aqueous environment, remarkably the probe successfully detected Hg²⁺ ions in seabass, swordfish and different samples of water. In all, TPA-TSC offers a promising method for accurately determining the quality of seafood and water samples polluted with Hg²⁺.

A Competitive Assay Based on Dual-Mode Au@Pt-DNA Biosensors for On-Site Sensitive Determination of Carbendazim Fungicide in Agricultural Products

Carbendazim (CBZ), a systemic, broad-spectrum benzimidazole fungicide, is widely used to control fungal diseases in agricultural products. Its residues might pose risks to human health and the environment. Therefore, it is warranted to establish a rapid and reliable method for its residual quantification. Herein, we proposed a competitive assay that combined aptamer (DNA) specific recognition and bimetallic nanozyme gold@platinum (Au@Pt) catalysis to trace the CBZ residue. The DNA was labeled onto bimetallic nanozyme Au@Pt surface to produce Au@Pt probes (Au@Pt-DNA). The magnetic Fe₃O₄ was functionalized with a complementary strand of DNA (C-DNA) to form Fe₃O₄ probes (Fe₃O₄-C-DNA). Subsequently, the CBZ and the Fe₃O₄ probes competitively react with Au@Pt probes to form two Au@Pt-DNA biosensors (Au@Pt-ssDNA-CBZ and Au@Pt-dsDNA-Fe₃O₄). The Au@Pt-ssDNA-CBZ biosensor was designed for qualitative analysis through a naked-eye visualization strategy in the presence of CBZ. Meanwhile, Au@Pt-dsDNA-Fe₃O₄ biosensor was developed to quantitatively analyze CBZ using a multifunctional microplate reader. A competitive assay based on the dual-mode Au@Pt-DNA biosensors was established for onsite sensitive determination of CBZ. The limit of detection (LOD) and recoveries of the developed assay were 0.038 ng/mg and 71.88-110.11%, with relative standard deviations (RSDs) ranging between 3.15 and 10.91%. The assay demonstrated a good correlation with data acquired from liquid chromatography coupled with mass spectrometry/mass spectrometry analysis. In summary, the proposed competitive assay based on dual-mode Au@Pt-DNA biosensors might have a great potential for onsite sensitive detection of pesticides in agro-products.

Simple Design Concept for Dual-Channel Detection of Ochratoxin A Based on Bifunctional Metal-Organic Framework

A simple fluorescence and electrochemical dual-channel biosensor based on bifunctional Zr(IV)-based metal-organic framework (Zr-MOF) was proposed to detect Ochratoxin A (OTA). The bifunctional Zr-MOF, with photoluminescence properties and enormous electroactive ligands, was exploited to load OTA-specific aptamers for designing signal probes, greatly simplifying the probe-fabrication process and improving sensing reliability. Upon specific recognition of aptamer toward OTA, the anchored probe was released from the sensing interface into the reaction solution. In this circumstance, the increased amount of the signal probe in reaction solution led to an enhanced fluorescence response, while the decreased amount of the signal probe on the sensing interface resulted in a diminished electrochemical response. According to the dual-channel signal change with increasing OTA concentration, the visual fluorescence strategy was established for intuitive OTA detection, and meanwhile, sensitive electrochemical assay with a detection limit of 0.024 pg/mL was also achieved with the help of one-step electrodeposition as a sensing platform. Moreover, the proposed dual-channel assay has been successfully applied to determine OTA levels in corn samples with rapid response, superior accuracy, and high anti-interference capability, providing a promising method for food safety monitoring.

Ultrasensitive electrochemical sensor for mercury ion detection based on molybdenum selenide and Au nanoparticles via thymine-Hg2+-thymine coordination

An ultrasensitive and specific-selection electrochemical sensor was constructed for Hg²⁺ detection based on Au nanoparticles and molybdenum selenide (Au NPs@MoSe₂) as well as the thymine-Hg²⁺-thymine (T-Hg²⁺-T) coordination. Herein, Au NPs@MoSe₂ not only could improve the sensitivity due to the large surface area and good electrical conductivity but also offered more sites to immobilize thiol-labeled T-rich hairpin DNA probes (P-1), which has a specific recognition for Hg²⁺ and methylene blue-labeled T-rich DNA probes (MB-P). When Hg²⁺ and MB-P exist, P-1 and MB-P can form a stable T-Hg²⁺-T complex. Then, methylene blue can be close to the electrode and detectable via differential pulse voltammetry (DPV). Benefiting from the specific recognition of T-Hg²⁺-T and the merits of Au NPs and MoSe₂, the fabricated biosensor presented an ultrasensitive and highly selective performance. The DPV responses had a positive linear relationship with Hg²⁺ concentrations over ten orders of magnitude from 1.0 × 10^-16 to 1.0 × 10^-7 mol L^-1. The detection limit was down to 1.1 × 10^-17 mol L^-1. Moreover, the developed sensor exhibited a promising application for trace Hg²⁺determination in water samples.

A novel electrochemical aptasensor based on layer-by-layer assembly of DNA-Au@Ag conjugates for rapid detection of aflatoxin M1 in milk samples

Aflatoxin M₁ (AFM₁) is a common toxin in dairy products that causes acute and chronic human health disorders. Thus, the development of a rapid and accurate AFM₁ detection method is of vital importance for food safety monitoring. This work was to develop a novel electrochemical aptasensor for sensitive and specific determination of AFM_1. The dendritic-like nanostructure was formed on the gold electrode surface by layer-by-layer assembly of gold-silver core-shell nanoparticles modified with DNA conjugates. In the presence of AFM₁, the specific recognition between AFM₁ and Apt caused the disassociation of the DNA controlled dual Au@Ag conjugates from the surface of the electrode, causing less methylene blue to bind to the surface and weakening the electrochemical signal. The more AFM₁ there is, the weaker the electrochemical signal. Transmission electron microscope results showed that the successfully synthesized Au@Ag nanoparticles exhibited a core-shell structure with Au as core and Ag as shell, and their average diameter was about 30 nm. Under optimal conditions, the electrochemical aptasensor showed a wide detection ranging from 0.05 ng mL^-1 to 200 ng mL^-1, and a low detection limit of 0.02 ng mL^-1. Moreover, the proposed strategy has been successfully applied to the detection of AFM₁ in cow, goat, and sheep milk samples with satisfactory recoveries ranging from 91.10% to 104.05%. This work can provide a novel rapid detection method for AFM₁, and also provide a new sensing platform for the detection of other toxins.

Nitrogen, boron-doped Ti3C2 MXene quantum dot-based ratiometric fluorescence sensing platform for point-of-care testing of tetracycline using an enhanced antenna effect by Eu3

The Ti₃C₂ MXene quantum dots (Ti₃C₂ MQDs) derived from Ti₃C₂ MXene have received much attention because of their remarkable advantages in biosensing. Nevertheless, the functionalization of Ti₃C₂ MQDs to improve their properties is just in its infant stage. Herein, we firstly synthesized nitrogen and boron co-doped Ti₃C₂ MQDs (N, B-Ti₃C₂ MQDs) with good water solubility, strong stability, and high optical characteristics. The N, B-Ti₃C₂ MQDs exhibit excitation wavelength-dependent blue photoluminescence with optimal excitation/emission peaks at 335/439 nm. Nowadays, the development of fast and real-time detection of tetracycline (TC) in animal derived food is very essential. In this work, a novel point-of-care testing (POCT) platform was established based on ratiometric fluorescence method using N, B-Ti₃C₂ MQDs coupled with Eu³⁺. Upon addition of TC in the Eu³⁺/N, B-MQDs system, blue fluorescence emission of N, B-Ti₃C₂ MQDs was quenched and red fluorescence emission of Eu³⁺ was enhanced gradually, which was ascribed to the synergistic inner filter effect and antenna effect. Moreover, we prepared test papers with N, B-Ti₃C₂ MQDs and Eu³⁺ for TC detection based on the change of fluorescence color, which could be recognized by color recognizer app installed in the smartphone. Therefore, great promise for POCT of TC is given with the merits of simplicity and visible detection possibility. The proposed method demonstrated a low detection limit of 20 nM. Application of the platform for TC quantification in milk samples opened a novel means for the potential use of N, B-Ti₃C₂ MQDs in food safety.

Synthesis of Copper Nanocluster and Its Application in Pollutant Analysis

Copper nanoclusters (Cu NCs) with their inherent optical and chemical advantages have gained increasing attention as a kind of novel material that possesses great potential, primarily in the use of contaminants sensing and bio-imaging. With a focus on environmental safety, this article comprehensively reviews the recent advances of Cu NCs in the application of various contaminants, including pesticide residues, heavy metal ions, sulfide ions and nitroaromatics. The common preparation methods and sensing mechanisms are summarized. The typical high-quality sensing probes based on Cu NCs towards various target contaminants are presented; additionally, the challenges and future perspectives in the development and application of Cu NCs in monitoring and analyzing environmental pollutants are discussed.