A comparative study on the effect of homogenization conditions on the properties of the film-forming emulsions and the resultant films

Structure of yuba films at the air/liquid interface as effected by the interfacial adsorption behavior of protein aggregates

The effects of adsorption behavior and assembly mechanism of proteins and lipids at the interface on the formation of yuba films were investigated. The thickness of yuba films increased rapidly from nano to micro scale within minutes according to the scanning electron microscopy (SEM) images. The confocal laser scanning microscope (CLSM), SEM images, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis revealed that the formation of protein aggregates (40-100 nm) was an essential requirement for the development of yuba. Meanwhile, a relatively loose spatial structure was formed by protein aggregates under the influence of water vapor. This structure served as the foundation for incorporating lipids. Interfacial adsorption kinetics indicated that increasing the concentration (from 3 to 9 mg/mL) of protein aggregates enhanced the rearrangement rate. This finding demonstrated that the variations of interfacial protein aggregate concentration were a crucial factor leading to the non-linear growth of film thickness.

Improved moisture barrier and mechanical properties of rice protein/sodium alginate films for banana and oil preservation: Effect of the type and addition form of fatty acid

Attenuating the moisture sensitivity of hydrophilic protein/polysaccharide-based films without impairing other properties remains a challenge. Fatty acid dispersed in Pickering emulsion was proposed to overcome such issue. An increase in fatty acid chain length slightly reduced the water vapor permeability (WVP) of emulsion films. As the number of fatty acid double bonds increased from 0 to 1, the WVP of emulsion films was significantly decreased by 14.02% while mechanical properties were significantly enhanced. More hydrogen bonds and stronger electrostatic interactions in the presence of fatty acids were observed by molecular dynamics simulation. The weight loss of bananas coated with oleic acid-incorporated film-forming emulsion was 6.81% lower than that of uncoated group after 4 days, and the corresponding film was more effective to delay oil oxidation than the commercial polypropylene film, indicating that the film is a promising alternative to food coating and packaging material.

Physicochemical and antimicrobial properties of soy protein isolate films incorporating high internal phase emulsion loaded with thymol

Oil-in-water (O/W) high internal phase (HIP) emulsion was prepared to investigate its effects on the physicochemical properties and antimicrobial properties of soy protein isolate (SPI)-based films. The particle size and migration degree of oil droplets in the SPI film-forming solution with HIP emulsion and the films were lower than those with conventional O/W emulsion or oil. The SPI-based emulsion films with HIP emulsion containing 30 % oil had the lowest water vapor permeability (1.15 × 10-10 g·m-1·s-1·Pa-1), glass transition temperature (40.93 °C) and tensile strength (4.47 MPa), and the highest transparency value (12.87) and elongation at break (160.83 %). The antimicrobial test of the SPI-based emulsion films loaded with thymol showed that the thymol encapsulation efficiency, sustained release effect, and growth inhibition effect on microbes were higher for the films with HIP emulsion than those for the films with O/W emulsion or oil.

Insights into recent innovations in barrier resistance of edible films for food packaging applications

The utilization of biopolymer-based food packaging holds significant promise in aligning with sustainability goals and enhancing food safety by offering a renewable, biodegradable, and safer alternative to traditional synthetic polymers. However, these biopolymer-derived films often exhibit poor barrier and mechanical properties, potentially limiting their commercial viability. Desirable barrier properties, such as moisture and oxygen resistance, are critical for preserving and maintaining the quality of packaged food products. This review comprehensively explores different traditional and advance methodologies employed to access the barrier properties of edible films. Additionally, this review thoroughly examines various approaches aimed at enhancing the barrier properties of edible films, such as the fabrication of multilayer films, the selection of biopolymers for composite films, as well as the integration of plasticizers, crosslinkers, hydrophobic agents, and nanocomposites. Moreover, the influence of process conditions, such as preparation techniques, homogenization, drying conditions, and rheological behavior, on the barrier properties of edible films has been discussed. The review provides valuable insights and knowledge for researchers and industry professionals to advance the use of biopolymer-based packaging materials and contribute to a more sustainable and food-safe future.

Improving the storage and oxidative stability of essential fatty acids by different encapsulation methods; a review

Linoleic acid and α-linolenic acid are the only essential fatty acids (EFAs) known to the human body. Other fatty acids (FAs) of the omega-6 and omega-3 families originate from linoleic acid and α-linolenic acid, respectively, by the biological processes of elongation and desaturation. In diets with low fish consumption or vegetarianism, these FAs play an exclusive role in providing two crucial FAs for maintaining our body's vital functions; docosahexaenoic acid and arachidonic acid. However, these polyunsaturated FAs are inherently sensitive to oxidation, thereby adversely affecting the storage stability of oils containing them. In this study, we reviewed encapsulation as one of the promising solutions to increase the stability of EFAs. Accordingly, five main encapsulation techniques could be classified: (i) spray drying, (ii) freeze drying, (iii) emulsification, (iv) liposomal entrapment, and (v) other methods, including electrospinning/spraying, complex coacervation, etc. Among these, spray drying was the frequently applied technique for encapsulation of EFAs, followed by freeze dryers. In addition, maltodextrin and gum Arabic were the main wall materials in carriers. Paying attention to industrial scalability and lower cost of the encapsulation process by the other methods are the important aspects that should be given more attention in the future.

Properties of konjac glucomannan/curdlan-based emulsion films incorporating camellia oil and the preservation effect as coatings on 'Kyoho' grapes

The strategy of emulsion coating was used for grape preservation. Camellia oil (CO) was incorporated with KGM/curdlan (KC) to fabricate KC-CO emulsion systems. KC-CO emulsions were analyzed by droplet size distribution and confocal laser scanning microscopy (CLSM), and KC-CO films were investigated by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), mechanical properties, dissolution, gas permeability, water contact angle (WCA). KC-CO coating was used for preservation of 'Kyoho' grapes. The results indicated that the addition of CO had a positive effect on KC system. CO could form a uniform emulsion with KC, and the droplets were evenly dispersed in the KC matrix. KC-CO films displayed a continuous microstructure, and elongation at break (EAB) was improved, while tensile strength decreased. The dissolution, water vapor permeability (WVP), and WCA were significantly enhanced, while the permeability of oxygen and carbon dioxide exhibited no advantage compared with KC film. KC-CO-10 possessed optimal properties and was selected as an emulsion coating for preservation. The results suggested that KC-CO-10 significantly maintained the appearance, total solid and acid content of 'Kyoho' grapes, and delayed the weight loss and firmness decrease. This study contributed to the understanding of polysaccharide-lipid emulsion system and the applications.

Films Based on Biopolymers Incorporated with Active Compounds Encapsulated in Emulsions: Properties and Potential Applications-A Review

The rising consumer demand for safer, healthier, and fresher-like food has led to the emergence of new concepts in food packaging. In addition, the growing concern about environmental issues has increased the search for materials derived from non-petroleum sources and biodegradable options. Thus, active films based on biopolymers loaded with natural active compounds have great potential to be used as food packaging. However, several lipophilic active compounds are difficult to incorporate into aqueous film-forming solutions based on polysaccharides or proteins, and the hydrophilic active compounds require protection against oxidation. One way to incorporate these active compounds into film matrices is to encapsulate them in emulsions, such as microemulsions, nanoemulsions, Pickering emulsions, or double emulsions. However, emulsion characteristics can influence the properties of active films, such as mechanical, barrier, and optical properties. This review addresses the advantages of using emulsions to encapsulate active compounds before their incorporation into biopolymeric matrices, the main characteristics of these emulsions (emulsion type, droplet size, and emulsifier nature), and their influence on active film properties. Furthermore, we review the recent applications of the emulsion-charged active films in food systems.

Development of intelligent and active potato starch films based on purple corn cob extract and molle essential oil

The present study aims to develop of an active and "intelligent" film that uses potato starch as a polymeric matrix, anthocyanins from purple corn cob as a natural dye, and molle essential oil as an antibacterial compound. The color of anthocyanin solutions is pH-dependent, and the developed films shows a visual color change from red to brown after immersion in solutions with pH values ranging from 2 to 12. SEM and FTIR analyses suggested that anthocyanins have favorable dispersibility and good compatibility with the starch-glycerol matrix. The study found that both anthocyanins and molle essential oil significantly enhanced the ultraviolet-visible light barrier performance; moreover, tensile strength, elongation at break, and elastic modulus reached values of 3.21 MPa, 62.16 %, and 12.87 MPa, respectively. The biodegradation rate in vegetal compost also accelerated during the three-week period, achieving a weight loss of 95 %. Moreover, the film presented an inhibition halo for Escherichia coli, indicating its antibacterial activity. The results suggest that the developed film has the potential to be used as food-packaging material.

Fortification of polysaccharide-based packaging films and coatings with essential oils: A review of their preparation and use in meat preservation

As the demand for botanical food additives and eco-friendly food packaging materials grows, the use of essential oils, edible biodegradable films and coatings are becoming more popular in packaging. In this review, we discussed the recent research trends in the use of natural essential oils, as well as polysaccharide-based coatings and films: from the composition of the substrates to preparing formulations for the production of film-forming technologies. Our review emphasized the functional properties of polysaccharide-based edible films that contain plant essential oils. The interactions between essential oils and other ingredients in edible films and coatings including polysaccharides, lipids, and proteins were discussed along with effects on film physical properties, essential oil release, their active role in meat preservation. We presented the opportunities and challenges related to edible films and coatings including essential oils to increase their industrial value and inform the development of edible biodegradable packaging, bio-based functional materials, and innovative food preservation technologies.

Effects of pre-emulsion prepared using sucrose esters with different hydrophile-lipophile balances on characteristics of soy protein isolate emulsion films

The preparation of emulsion films using pre-emulsification has received extensive attention due to the enhancement of oil binding capacity. However, the different effects of water in oil (W/O) and oil in water (O/W) pre-emulsions on the physicochemical properties of films are still unclear. Therefore, the soy protein isolate (SPI) based emulsion films were prepared by W/O or O/W pre-emulsion using sucrose esters with different hydrophile-lipophile balances to investigate the properties of SPI emulsion (SPIE) films. The viscosity, storage moduli, and loss moduli of film-forming solutions (FFSs) with O/W pre-emulsion were higher than those of FFSs with W/O pre-emulsion. The oil droplets of FFSs with W/O pre-emulsion were large and uneven, and the oil droplet size increased after drying. Phase separation and macroporous network appeared in cross-sectional of SPIE films with W/O pre-emulsion according to scanning electron microscope images. Meanwhile, the SPIE films with W/O pre-emulsion demonstrated higher oil concentration and hydrophobicity on the upper surface compared with the SPIE films with O/W pre-emulsion. Low tensile strength, glass transition temperature, and high elongation at break and transparency value of SPIE films with O/W pre-emulsions were founded. The water vapor permeability of SPIE films with W/O pre-emulsion increased with the addition of oil, whereas the opposite trend appeared in that with O/W pre-emulsion. In conclusion, the structure and porosity of emulsion films could be affected by the pre-emulsion types, which can determine the application ranges.

Film-Forming Properties of Topical Formulations for Skin and Hair: In Vivo and In Vitro Studies Using Biophysical and Imaging Techniques

The film-forming effect is an important property of formulations for skin improvement and hair protection. Reflectance confocal microscopy, an advanced imaging technique, is an important tool for its evaluation. Thus, the aim of this study was to evaluate the film-forming properties of cosmetic formulations based on starches and containing a Spirulina maxima extract after their application to skin and hair, using sensorial analysis and instrumental measurements, with emphasis on reflectance confocal microscopy. Two formulations based on starches and PEG-75 lanolin containing or not (Vehicle) a Spirulina maxima dry extract were developed. The rheological behavior and sensorial properties of both formulations were evaluated. The film-forming property on the skin was evaluated in terms of skin hydration by RCM imaging analysis and transepidermal water loss (TEWL). The hair tresses were evaluated in terms of mechanical properties and RCM imaging analysis. The formulations showed pseudoplastic behavior and a low hysteresis area. In addition, the presence of Spirulina in the formulation did not interfere in the rheological parameters. Both formulations reduced TEWL and maintained the stratum corneum water content. The protective effect was also observed in the hair, since the application of the formulation with Spirulina showed a better performance in the tensile test when compared to vehicle. Thus, the proposed formulation showed film formation on the skin and hair surface that brought immediate benefits such as a reduction of TEWL. Finally, the formulations were shown to have film-forming effects and their use can be suggested for skin and hair protection against daily damage.

Effects of beeswax emulsified by octenyl succinate starch on the structure and physicochemical properties of acid-modified starchfilms

This work aimed to develop a novel strategy to modulate the distribution of beeswax in acid-modified starch films via tuning octenyl succinate starch (OSS) ratios and to elucidate their structure-property relationships. The apparent viscosity and storage modulus of the film-forming solution decreased with the increase of OSS ratio. Attenuated total reflectance-fourier transform infrared (ATR-FTIR) spectroscopy revealed that the hydrogen bond in the film-forming network was cleaved with the presence of OSS. Scanning electron microscope (SEM), atomic force microscope (AFM), and X-ray diffraction (XRD) demonstrated that OSS ratio had an obvious effect on the formation and distribution of beeswax crystal particles. Uniform distribution of beeswax effectively enhanced the hydrophobicity and water barrier properties of films and performed preferable elongation at break but at the expense of tensile strength and optical properties. The films with higher OSS ratio (>12 %) presented higher thermal stability. This study provides new information on the rational design of emulsified films to obtain desirable physicochemical properties by tuning the distribution of beeswax.

Application of Clove Oil and Sonication Process on the Influence of the Functional Properties of Mung Bean Flour-Based Edible Film

The present study was aimed to investigate the effects of sonication and clove oil incorporation on the improvement of physical, antioxidant, and antimicrobial properties and lipid oxidation inhibiting abilities of mung bean flour (MF)-based films. There were three groups of films tested (1) MF: mung bean flour alone, (2) MFC: MF incorporated with 2% clove oil (C), and (3) MFCU: MFC prepared with sonication (25 kHz, 100% amplitude, 10 min). Film thickness and bulk density showed slight differences, and moisture content, solubility, and water vapor permeability significantly differed between the formulations. Tensile strength, elongation at break, and Young’s modulus were highest for the MFCU films, followed by MFC and MF in rank order. Furthermore, the Fourier-transform infrared spectroscopy results also demonstrated that the clove oil and sonication treatment had improved the interconnections of the biopolymers, thus increasing the physical strength of the film. Phytochemicals in terms of total phenolics and total flavonoids were elevated in the MFCU films and contributed to stronger radical scavenging abilities (p < 0.05). MFC and MFCU films showed a strong antibacterial control of the Gram-positive Staphylococcus aureus (S. aureus) and also of the Gram-negative Campylobacter jejuni (C. jejuni). Overall, the lipid oxidation indicators Thiobarbituric acid reactive substances (TBARS, peroxide value, p-anisidine value, and totox value) showed significantly high inhibition, attributed to radical scavenging activities in the MFCU and MFC samples. The mung bean flour films incorporated with clove oil and prepared with sonication have good potential as packaging materials for food due to strong physical, antimicrobial, and antioxidant properties, as well as lipid oxidation inhibiting abilities.

Biodegradable carboxymethyl cellulose-polyvinyl alcohol composite incorporated with Glycyrrhiza Glabra L. essential oil: Physicochemical and antibacterial features

Glycyrrhiza glabra L. root essential oil (GGEO) has well-known antimicrobial and therapeutic features. In this study, a new antimicrobial carboxymethyl cellulose-polyvinyl alcohol (CMC-PVA) binary film was developed using GGEO as an active compound. The effects of various concentrations of GGEO (0.25%, 0.50%, and 0.75%) were scrutinized on the physicochemical and antibacterial properties of composites. It was discovered that GGEO significantly reduced the composite ultimate tensile strength from 17.01 to 3.86 MPa. Further, by increasing the concentration of GGEO to 0.75%, the water vapor permeability and moisture content increased to 13.61 × 10-9 g/m s-1 Pa-1 and 41.06%, respectively. The results indicated that the active films possessed good inhibitory effects against the gram-positive bacteria (L. monocytogenes and Staphylococcus aureus) and were less powerful against gram-negative bacteria (Escherichia coli and S. typhimurium). Finally, the results highlighted that GGEO can act as an excellent antimicrobial agent in combination with CMC-PVA composite.

P. S. AK, Olaiya NG, Abdullah CK, Alfatah T, Gopakumar DA, Pasquini D. Improved Hydrophobicity of Macroalgae Biopolymer Film Incorporated with Kenaf Derived CNF Using Silane Coupling Agent

Hydrophilic behaviour of carrageenan macroalgae biopolymer, due to hydroxyl groups, has limited its applications, especially for packaging. In this study, macroalgae were reinforced with cellulose nanofibrils (CNFs) isolated from kenaf bast fibres. The macroalgae CNF film was after that treated with silane for hydrophobicity enhancement. The wettability and functional properties of unmodified macroalgae CNF films were compared with silane-modified macroalgae CNF films. Characterisation of the unmodified and modified biopolymers films was investigated. The atomic force microscope (AFM), SEM morphology, tensile properties, water contact angle, and thermal behaviour of the biofilms showed that the incorporation of Kenaf bast CNF remarkably increased the strength, moisture resistance, and thermal stability of the macroalgae biopolymer films. Moreover, the films’ modification using a silane coupling agent further enhanced the strength and thermal stability of the films apart from improved water-resistance of the biopolymer films compared to unmodified films. The morphology and AFM showed good interfacial interaction of the components of the biopolymer films. The modified biopolymer films exhibited significantly improved hydrophobic properties compared to the unmodified films due to the enhanced dispersion resulting from the silane treatment. The improved biopolymer films can potentially be utilised as packaging materials.