Effect of micro- and nano-starch on the gel properties, microstructure and water mobility of myofibrillar protein from grass carp

Effects of cross-linked/acetylated tapioca starches on the gelling properties, rheological behaviors and microstructure of myofibrillar protein gels: Perspective on molecular interactions and phase transition

The present work mainly investigated the changes of gel characteristics, rheological properties and ultrastructure of myofibrillar protein (MP) gels with varying amounts (2, 4, 6, and 8 %, w/w) of cross-linked tapioca starch (CTS) or acetylated tapioca starch (ATS). The findings showed that CTS or ATS notably improved the gelling characteristics (such as gel strength and water retention) of mixed MP gels in a dose-dependent manner (P < 0.05), which was clearly verified by the results of rheological behavior tests under different modes. Moreover, compared to ATS, CTS rendered higher gel strength and promoted the formation of a more uniform and smoother mixed MP gel matrix, which was mainly attributed to the higher peak viscosity of CTS. Furthermore, the images of iodine staining indicated that in mixed MP gels, the continuous phase supported by MP was gradually transited to being starch supported as the amounts of CTS or ATS increased between 2 % and 8 %. Additionally, hydrophobic interactions and disulfide bonds were the principal chemical forces of mixed MP gels, which could promote the occurrence phase transition. Briefly, our present work provided some vital understanding of the molecular interactions between MP and modified tapioca starches, which could efficiently modulate the quality profiles of meat products.

Insight into the effects of ultrasound-assisted intermittent tumbling on the gelation properties of myofibrillar proteins: Conformational modifications, intermolecular interactions, rheological properties and microstructure

The aim of the present study was to evaluate the effects of ultrasound-assisted intermittent tumbling (UT) at 300 W, 20 kHz and 40 min on the conformation, intermolecular interactions and aggregation of myofibrillar proteins (MPs) and its induced gelation properties at various tumbling times (4 and 6 h). Raman results showed that all tumbling treatments led the helical structure of MPs to unfold. In comparison to the single intermittent tumbling treatment (ST), UT treatment exerted more pronounced effects on strengthening the intermolecular hydrogen bonds and facilitating the formation of an ordered β-sheet structure. When the tumbling time was the same, UT treatment caused higher surface hydrophobicity, fluorescence intensity and disulfide bond content in the MPs, inducing the occurrence of hydrophobic interaction and disulfide cross-linking between MPs molecules, thus forming the MPs aggregates. Additionally, results from the solubility, particle size, atomic force microscopy and SDS-PAGE further indicated that, relative to the ST treatment, UT treatment was more potent in promoting the polymerization of myosin heavy chain. The MPs aggregates in the UT group were more uniform than those in the ST group. During the gelation process, the pre-formed MPs aggregates in the UT treatment increased the thermal stability of myosin, rendering it more resistant to heat-induced unfolding of the myosin rod region. Furthermore, they improved the protein tail-tail interaction, resulting in the formation of a well-structured gel network with higher gel strength and cooking yield compared to the ST treatment.

Incorporation of cross-linked/acetylated tapioca starches on the gelling properties, rheological behaviour, and microstructure of low-salt myofibrillar protein gels: Perspective on phase transition

This study investigated the gelling properties, rheological behaviour, and microstructure of heat-induced, low-salt myofibrillar protein (MP) gels containing different levels (2%, 4%, 6%, and 8%, w/w) of cross-linked (CTS) or acetylated (ATS) tapioca starch. The results indicated that either CTS or ATS significantly enhanced the gel strength and water-holding capacity of low-salt MP gels (P < 0.05), an outcome verified by the rheological behaviour test results under different modes. Furthermore, iodine-staining images indicated that the MP-dominated continuous phase gradually transited to a starch-dominated phase with increasing CTS or ATS levels, and 4% was the critical point for this phase transition. In addition, hydrophobic interactions and disulphide bonds constituted the major intermolecular forces of low-salt MP gels, effectively promoting phase transition. In brief, modified tapioca starches possess considerable potential application value in low-salt meat products.

Impact of konjac glucomannan with varied deacetylation degrees on plant-based meat analogue: Study on the gel properties, digestibility, and microstructure

Polysaccharides are widely used to improve the quality of plant-based meat analogue (PMA). In this study, four kinds of konjac glucomannan (KG) with different deacetylation degrees (DD) were prepared, namely KG1 (native KG, DD = 0.00 %), KG2 (DD = 41.40 %), KG3 (DD = 80.01 %) and KG4 (DD = 89.07 %), and their effects on the quality of PMA were studied. Results manifested that KG3 improved the hardness (from 3017.16 g to 3307.16 g) and protein digestibility (from 49.65 % to 53.01 %) of PMA without reducing the P21, KG2 and KG4 were less effective than KG3, while KG1 led to a significant decline in the hardness and protein digestibility of PMA. The rheological properties and intermolecular force analysis showed that the partially deacetylated KG was more conducive to improving the G' of the protein system during heating and the proportion of covalent bonds in PMA. These findings suggested that partially deacetylated KG was more promising than native or highly deacetylated KG in PMA. Furthermore, scanning electron microscopy revealed that the morphology of KG gradually changed from fine filaments, to coarse filaments, short filaments and granules as DD increased. This study provides a theoretical basis for the application of partially deacetylated KG in PMA.

Impact of Packaging Methods Coupled with High Barrier Packaging Loaded with TiO2 on the Preservation of Chilled Pork

This study investigated the impact of packaging methods coupled with high barrier packaging loaded with titanium dioxide (TiO2) on the quality of chilled pork. The experiment consisted of three treatment groups: air packaging (AP), vacuum packaging (VP), and vacuum antibacterial packaging (VAP). Changes in total viable count (TVC), pH value, total volatile basic nitrogen (TVB-N) value, sensory attributes, and water holding capacity of pork were analyzed at 0, 3, 6, 9, and 12 d. TVC of the VAP group was 5.85 Log CFU/g at 12 d, which was lower than that of AP (6.95 Log CFU/g) and VP (5.93 Log CFU/g). The antibacterial film incorporating TiO2 effectively inhibited microorganism growth. The VAP group exhibited the lowest pH value and TVB-N value among all the treatment groups at this time. The findings demonstrated that the application of VAP effectively preserved the sensory attributes of pork, the hardness, cohesiveness and adhesiveness of pork in VAP group were significantly superior than those in AP group (p<0.05), but not significantly compared with VP group. On the 12 d, the CIE a* value of pork in VAP group was significantly higher (p<0.05). This exhibited that VAP could effectively maintain the freshness of chilled pork and extend the shelf life for 3 d compared to the AP group. These findings provide empirical evidence to support the practical implementation of TiO2-loaded packaging film in the food industry.

Effects of Different Types of Starch on Physicochemical Properties and Microstructure of Beef during Cold Storage

The purpose of this study was to identify the most effective method for enhancing the quality of beef gel during refrigeration. To achieve this objective, the effects of various types of starch on the physicochemical properties and microstructure of beef gel during refrigeration were investigated. In this study, ground beef gel was chosen as the research subject, and six different types of starch were added: 6% tapioca starch, cassava-modified starch (acetylated distarch phosphate, ADSP), potato starch (PSP), modified potato starch (acetate starch, SA), corn starch (CSP), and modified corn starch (hydroxypropyl distarch phosphate, HPDSP). The quality indicators of ground beef were measured and analyzed throughout the cold storage at 4 °C on days 1, 3, 5, 7, and 9. The results demonstrated that the water capacity of beef mince supplemented with PSP and HPDSP was significantly greater (p < 0.05). Additionally, the gel strength was found to be the highest, while the mesh structure formed in the ADSP group was the greatest. Furthermore, HPDSP, PSP, and SA effectively inhibited the oxidation of meat fat, with SA showing a relatively good effect on delaying the oxidation of meat mince protein. The addition of starch can, to a certain extent, inhibit lipid and protein oxidation in meat mince. In conclusion, starch significantly enhances the quality of beef mince by improving water retention, gel strength, and microstructure during refrigeration.

Effect of Soy Protein Isolate on the Quality Characteristics of Silver Carp Surimi Gel during Cold Storage

This study mainly investigated the effect of soy protein isolate (SPI) on the gel quality of silver carp surimi under different storage conditions (storage temperatures of 4 °C, -20 °C, and -40 °C, and storage times of 0, 15, and 30 d). The results found that 10% SPI could inhibit the growth of ice crystals, improve the water distribution, enhance the water holding capacity of the gels, and strengthen the interaction between surimi and proteins. Compared to the control group, the composite silver carp surimi gel exhibited superior quality in texture, chemical interactions, and rheological properties during cold storage. Fourier transform infrared spectroscopy revealed an increasing trend in α-helix and β-turn content and a decreasing trend of β-sheet and random coil content. As storage time increased, the gel deterioration during cold storage inhibitory effect of the treatment group was superior to the control group, with the best results observed at -40 °C storage conditions. Overall, SPI was a good choice for maintaining the quality of silver carp surimi gel during cold storage, which could significantly reduce the changes in the textural properties during cold storage with improved water holding capacity.

Enhancement of the gelling properties of Aristichthys nobilis: Insights into intermolecular interactions between okra polysaccharide and myofibrillar protein

The effects of various contents of okra polysaccharide (OP) (0%-1%) on myofibrillar protein (MP) gelation and the interaction mechanism between OP and MP were investigated. OP improved the gelling properties of MP with an additive limitation of 0.75%. Rheological analysis demonstrated that the addition of OP enhanced the interactions between MPs, resulting in a denser intermolecular gel network structure. The addition of OP shifted the I850/I830 of Fourier transform infrared spectroscopy, indicating that hydrogen bonds were formed between OP and MP. Adding OP promoted the transition from α-helix to β-sheet in the MP. OP exposed the hydrophobic groups of MPs and increased the number of hydrophobic interactions between them, favoring the formation of a dense gel network. Molecular docking predicted that hydrogen bonds were the main force involved in the binding of OP and MP. Moderate OP promoted the aggregation of MPs and improved their functional properties, facilitating heat-induced gelation.

An oral gel suitable for swallowing: The effect of micronization on the gel properties and microstructure of κ-carrageenan

κ-Carrageenan (κ-Car) is an important material for preparing food gels and hydrogels. However, κ-Car gel has issues with high hardness and low water-holding capacity. Modification strategy of micronization is proposed for the first time to explore its influence on texture properties and gelling process of κ-Car gel, and to investigate the feasibility of κ-Car as a food matrix with low strength. κ-Car undergoing 60 min of micronization, the d(0.9) decreased by 79.33 %, SBET and Vtotal increased by 89.23 % and 95.27 %. The swelling rate and degree of gelling process increased significantly, and the microstructure changed from loose large pores to dense small pores resembling a "honeycomb". Importantly, the hardness of gel-60, Milk-60 and PNS-60 decreased by 72.52 %, 49.25 % and 81.37 %. In addition, WHC of gel-60, Milk-60 and PNS-60 was improved. IDDSI tests showed that κ-Car gels, milk gels and PNS gels can be categorized as level 6 (soft and bite-sized), except for PNS-60, which belongs to level 5 (crumbly and moist). Furthermore, the texture and bitter masking effect of milk gels and PNS gels were improved. In conclusion, this study demonstrated that micronization can be a novel approach to improve the gel properties of κ-Car, laying the groundwork for developing dysphagia foods.

Rheological, thermal, and structural properties of heat-induced gluten gel: Effects of starch with varying degrees of debranching

This study evaluated the effects of starch with varying degree of debranching on the rheological, thermal, and structural properties of heat-induced gluten gel. As the duration of starch debranching treatment increased from 0 to 8 h, the viscoelasticity of the gel containing debranched starch (DBS) improved. Compared with the gluten gel (G), the gel strength of the G + DBS (8 h) sample increased by 65.2 %. The degradation temperature of gluten was minimally affected by DBS, while the weight loss rate increased by 4.4 %. Furthermore, the α-helical structure of gluten decreased, concomitant with an increase in β-sheet content. Notably, DBS treated for 8 h exhibited more hydrogen bonds with the tyrosine of gluten and triggered disulfide bridge conformation to transition from g-g-g to t-g-g, thereby reducing the stability of the molecular conformation of gluten proteins, as evidenced by the decreased height and width of the molecular chains observed in atomic force microscopy images. Overall, the composite gel structure induced by DBS exhibited a more continuous and homogeneous owing to the improved compatibility between DBS and gluten proteins, favoring the formation of a robust gel. These findings provide valuable insights for utilizing DBS to enhance gluten gel properties.

Effects of different polysaccharide colloids on the structure and physicochemical properties of peanut protein and wheat gluten composite system under extrusion

The structure and physicochemical properties of the complex system of peanut protein and gluten with different concentrations (0 %, 0.5 %, 1 %, and 2 %) of carboxymethyl cellulose (CMC) or sodium alginate (SA) under high-moisture extrusion were studied. The water absorption index and low-field nuclear magnetic resonance showed that adding 0.5 % SA could significantly improve the water uniformity of peanut protein extrudates, while the increase in water absorption was not significant. The texture properties showed that adding CMC or SA increased the hardness, vertical shearing force, and parallel shearing force of the system. Furthermore, adding 0.5 % SA increased approximately 33 % and 75.2 % of the tensile distance and strength of the system, respectively. The secondary structure showed that CMC or SA decreased the proportion of α-helix, β-turn, and random coil, while increased β-sheet proportion. The results of hydrophobicity, unextractable protein, and endogenous fluorescence revealed that CMC and SA reduced the surface hydrophobicity of the system and caused fluorescence quenching in the system. Additionally, it was found that CMC generally increased the free sulfhydryl group content, while SA exhibited the opposite effect.

Effect of starch and peanut oil on physicochemical and gel properties of myofibrillar protein: Amylose content and addition form

Starch and peanut oil (PO) were widely used to improve the gel properties of surimi, however, the impact mechanism of addition forms on the denaturation and aggregation behavior of myofibrillar protein (MP) is not clear. Therefore, the effect of starch, PO, starch/PO mixture, and starch-based emulsion on the physicochemical and gel properties of MP was investigated. The results showed that amylose could accelerate the aggregation of MP, while amylopectin was conducive to the improvement of gel properties. The addition of PO, starch/PO mixture, or starch-based emulsion increased the turbidity, solubility, sulfhydryl content of MP, and improved the gel strength, whiteness, and texture of MP gel. However, compared with starch/PO mixture group, the gel strength of MP with waxy, normal and high amylose corn starch-based emulsion increased by 22.68 %, 10.27 %, and 32.89 %, respectively. The MP containing emulsion had higher storage modulus than MP with starch/PO mixture under the same amylose content. CLSM results indicated that the oil droplets aggregated in PO or starch/PO mixture group, while emulsified oil droplets filled the protein gel network more homogeneously. Therefore, the addition of starch and PO in the form of emulsion could effectively play the filling role to improve the gel properties of MP.

Exploring the versatility of carbohydrates in surimi and surimi products: novel applications and future perspectives

Carbohydrate is one kind of the most important additives in the production of surimi and surimi products, mainly due to its wide range of sources and superior functionality. In recent years, new carbohydrates (oligosaccharides and polysaccharides) have been gradually applied in the production of surimi and surimi products which is mainly driven by consumer requirement on nutritional and the flavors or taste quality and producer requirement on extending the shelf life, like low calorie intake, dietary fiber enrichment, rich taste and improvement of antioxidant properties. Besides anti-freezing and improvement in gelling ability, novel functionalities have been explored such as fat substitution, improving flavor, antibacterial effect, antioxidant effect and improving three-dimensional printability. With an in-depth study of the mechanism of carbohydrate improving the qualities of surimi and surimi products, the application of carbohydrates in surimi would be more effective. Therefore, this review summarizes the new carbohydrates applied in the processing of surimi and surimi products, and their novel functionalities. Additionally, progress of the research on the mechanism of carbohydrate improving the qualities of surimi is also reviewed. © 2023 Society of Chemical Industry.

Comparative analysis of soluble and insoluble dietary fiber on improving the gelation performance and fishy odors of silver carp surimi

This work investigated the effects and mechanisms of soluble and insoluble dietary fiber (SDF and IDF) on the gelation performance and fishy odors of silver carp surimi. The results showed that the gel properties of surimi increased and then decreased with increasing SDF content, and the best gel properties were achieved at 1 wt% SDF. The gel strength, elasticity and deformation resistance of surimi increased in a dose-dependent manner as affected by IDF, but its effect on viscosity and recovery ratio was similar to SDF. Moreover, 2 wt% SDF and 1 wt% IDF reduced the content and odor activity value (OAV) of most fishy compounds in surimi, and the latter was superior to the former. The rheological characteristics indicated that SDF affected the thermal gelation properties of surimi mainly through filling, concentration and volume exclusion, and IDF mainly through filling, concentration and intermolecular interactions between IDF and myofibrillar protein. Additionally, SDF and IDF inhibited the release of fishy odors by improving the gel network structure and their adsorption, but more SDF (2 wt%) promoted the formation of escape channels for odors release. In summary, 1 wt% IDF could simultaneously improve the gelation performance and fishy odors of silver carp surimi.

Salmon protein gel enhancement for dysphagia diets: Konjac glucomannan and composite emulsions as texture modifiers

The growing prevalence of dysphagia among the aging population presents a significant challenge. Many highly nutritious foods, like salmon, are often unsuitable for the elderly due to their firm texture when heated. To address this concern, a combination of salmon myofibrillar protein (SMP), Konjac glucomannan (KGM), and different emulsion fillers-such as oil droplets, octenyl succinic anhydride (OSA)-modified potato starch emulsion, and high methoxylated pectin (HMP) emulsions-was selected to enhance the network of salmon protein gels with the aims to create potential applications as dysphagia-friendly foods. The International Dysphagia Dietary Standardization Initiative (IDDSI) test indicated that all gel samples were classified as level 5. The OSA-SMP-KGM gel exhibited notably higher cohesiveness (P < 0.05), reduced adhesion, and enhanced mouthfeel. The OSA-SMP-KGM gel exhibited a smooth surface and excellent water retention (92.4 %), rendering it suitable for individuals with swallowing difficulties, particularly those prone to experiencing dry mouth. The yield stress of OSA-SMP-KGM gel was 594.14 Pa and stable structure was maintained during chewing and swallowing (γe/γv = 62.5). This study serves as a valuable reference for developing salmon-based products that are not only highly nutritious but also fulfill the criteria for a desirable swallowing texture.

A mini review on manipulation of carbohydrate for better use in surimi and surimi products: modification and compounding

Carbohydrate is widely used in the production of surimi and surimi products to improve their qualities, such as anti-freezing capability, gelling ability, nutrition, flavor and 3D printability. More and more native carbohydrates have been modified through physical methods (e.g., ball milling, irradiation and differential sedimentation), chemical method (e.g., deacetylation, hydroxypropylation and acetic acid esterification) or enzymatic method (e.g., chitosanase) before being used in the processing of surimi and surimi products in recent years. At the same time, different carbohydrates are compounded and applied to surimi and surimi products. The modified and compounded carbohydrates in surimi have been proved to improve quality of surimi and surimi products more pronouncedly than native carbohydrates. Therefore, this review summarizes the manipulation of carbohydrate by modification and compounding to improve the qualities of surimi and surimi products. Moreover, the prospects for carbohydrate modification and compounding for use in surimi and surimi products are discussed. © 2023 Society of Chemical Industry.

Probabilistic health risk assessment of heavy metals (Cd, Pb, and As) in Cocoa powder (Theobroma cacao) in Tehran, Iran market

The concentrations of toxic elements were analyzed by using Flame Atomic Absorption Spectrophotometer (FAAS). Moreover, the human health risk was estimated by Total Target Hazard Quotient (TTHQ) and Cancer Risk (CR) in Monte Carlo Simulation (MCS) technique. The mean concentrations (mg/kg) of Cd (0.08 ± 0.08), Pb (0.23 ± 0.46), and As (0.06 ± 0.04), were in a good compliance with ISO (Iranian standard organization). TTHQ for adults and children was equal to 0.009 and 0.042, respectively and also mean CR in adults and children consumers was equal to 9.73E-7 and 9.08E-7, respectively. Consequently, the concentration of toxic elements (Cd, Pb, and As) in cocoa powder did not pose any safety concerns. Moreover, probabilistic health risk assessment revealed that both adults and children were not at considerable non-carcinogenic (THQ and/or TTHQ ≤ 1) and carcinogenic risk (CR ≤ 1E-6). Even though, seeking for mitigating solutions and applying them to suppress the dangers of food containing toxic elements is a critical subject.

In-depth insight into the effects of tapioca or corn acetylated distarch phosphate on the gel properties and in vitro digestibility of kung-wan

Modified starch is increasingly applied in the meat industry as an effective functional ingredient to provide meat products with the desired textural properties and appearance. This study aimed to investigate the effects of incorporating tapioca acetylated distarch phosphate (TADSP) or corn acetylated distarch phosphate (CADSP) on the gel properties and in vitro digestibility of Chinese-style meatballs known as kung-wan. The results showed that TADSP and CADSP significantly enhanced the textural properties of kung-wan in a dose-dependent manner (P < 0.05), as well as enhanced the rheological behavior of meat batters. TADSP resulted in a denser meat protein gel network compared to CADSP, primarily because the lower pasting temperature of TADSP made it gelatinize earlier and more completely during heating than CADSP and subsequently filled in the meat protein gel network. The intermolecular forces observed in kung-wan with TADSP or CADSP were hydrogen bonds and hydrophobic interactions. Furthermore, the protein digestibility of kung-wan was increased with higher levels of TADSP and CADSP (P < 0.05). Notably, kung-wan with TADSP exhibited significantly higher protein digestibility than those with CADSP at the same level (P < 0.05). Our results offer valuable insights into the potential application of acetylated distarch phosphate in kung-wan.

LF-NMR determination of water distribution and its relationship with protein- related properties of yak and cattle during postmortem aging

The water distribution have a profound influence on meat quality, and proteins play a critical role in water distribution. The water distribution detected with proton NMR and its relationship with protein related properties were investigated. Three populations of water were detected: bound water (T21, P21), immobilized water (T22, P22), and free water (T23, P23). The decreased T22 and T23 indicated an increase in water-holding capacity in both muscles from 3 days of aging. The P22 in cattle was higher than that in yak and the P23 in cattle was lower than that in yak, suggesting that cattle exhibited a greater water-holding capacity compared to yak. Moreover, postmortem aging affected muscle protein oxidation, denaturation, and degradation. Correlation analysis suggested that protein oxidation and denaturation caused muscle water loss and protein degradation could allow the muscle to retain water. It provides a basis for the optimization of quality of meat and products.

Evaluation of sono-physico-chemical and processing effects in the mixed sarcoplasmic protein/soy protein isolate system

Since it may be employed to guide the production of high-quality plant protein as a partial substitute for animal protein using sono-physico-chemical effects, it is important to investigate the mixing of animal and plant protein in ultrasound (UID)-assisted processing systems. A study group of sono-physico-chemical processing with five distinct soy protein isolate (SPI)/ sarcoplasmic protein (SPN) ratios was developed in this work. The results showed that adding additional SPN to the mixed protein can increase its sono-physico-chemical impact, and this effect is greatest when the ratio of SPI to SPN is 1:3. The high SPN group's grafting rate rose from 39.13% to 55.26% in comparison to the high SPI content group. Quercetin (Que) may more readily modify SPN than SPI in the "dual protein" system used in this work, highlighting the critical function of plant protein in controlling the effects of UID-assisted processing in the "dual protein" system. Changes in apparent viscosity and microstructure are the primary parameters that affect the severity of sono-physico-chemical effects in SPI/SPN mixed protein systems, in addition to structural variables.

Investigation of the effects and mechanism of incorporation of cross-linked/acetylated tapioca starches on the gel properties and in vitro digestibility of kung-wan

The effects and mechanism of incorporation of cross-linked tapioca starch (CTS) or acetylated tapioca starch (ATS) on the gel properties and in vitro digestibility of kung-wan (a Chinese-style meatball) were evaluated. The results indicated that incorporation of either CTS or ATS significantly enhanced the gel properties of kung-wan in a dose-dependent manner (P < 0.05), as well as the rheological properties of meat batter. Moreover, hydrogen bonds and electrostatic interaction were the major intermolecular forces in kung-wan when incorporated with CTS or ATS. Meanwhile, CTS and ATS acted as fillers in the meat protein gel matrix, which was further verified by the microstructure of kung-wan. However, CTS produced a more uniform and dense meat protein gel network than ATS, which was mainly due to its limited swelling characteristics. In addition, the incorporation of CTS or ATS significantly increased the in vitro digestibility of protein in kung-wan with increasing level of addition (P < 0.05). However, no significant differences in protein digestibility were detected between the CTS and ATS groups at the same addition level (P > 0.05). Our results provided some critical points for the actual application of modified tapioca starch to promote the quality profiles of kung-wan.

Green nanocoating-based polysaccharides decorated with ZnONPs doped Egyptian kaolinite for antimicrobial coating paper

Paper coating plays an important role in the paper properties, printability and application. The nanocoating is a multifunction layer that provides the paper with unique features. In this work, nanocoating formulas were prepared using a green method and component. The nanocoating formulas were based on biopolymers nanostarch NSt and nanochitosan NCh (NCS) decorated with Egyptian kaolinite Ka doped with zinc nanoparticles NCS@xka/ZnONPs (x represents different ratios) support for multifunctional uses. The nanocoating formulas were characterized using a physiochemical analysis as well as a topographical study. FTIR, XRD, SEM and TEM techniques were used. Additionally, the antimicrobial activity of the tested samples was assessed against six microorganisms including Gram-negative and Gram-positive bacteria. The prepared nanocoating formulas affirmed excellent antimicrobial activity as a broad-spectrum antimicrobial active agent with excellent activity against all representative microbial communities. The nanocoating with the highest ratio of Ka/ZnONPs (NCS@40 ka/ZnONPs) showed excellent antimicrobial activity with an inhibition percentage of more than 70% versus all microorganisms presented. The paper was coated with the prepared suspensions and characterized concerning optical, mechanical and physical properties. When Ka/ZnONPs were loaded into NCS in a variety of ratios, the characteristics of coated paper were enhanced compared to blank paper. The sample NCS@40 ka/ZnONPs increased tensile strength by 11%, reduced light scattering by 12%, and improved brightness and whiteness by 1%. Paper coated with NCh suspension had 35.32% less roughness and 188.6% less porosity. When coated with the sample NCS@10 ka/ZnONPs, the coated paper's porosity was reduced by 94% and its roughness was reduced by 10.85%. The greatest reduction in water absorptivity was attained by coating with the same sample, with a reduction percentage of 132%.

Effect of oil-modified crosslinked starch as a new fat replacer on gel properties, water distribution, and microstructures of pork meat batter

This work investigated the effects of oil-modified crosslinked starch (Oil-CTS) as a fat replacer on the gel properties, water distribution, microstructures, and fatty acid composition of pork meat batter. Results showed that the replacement of pork back fat by Oil-CTS could improve the gel performance in terms of rheological property, texture, and water-holding capacity (WHC), and reduce the water mobility of pork meat gels, which caused by the formation of a more ordered and denser protein network structure. Additionally, when the fat was replaced by Oil-CTS partially or totally (25-100 %), the total fat content in pork meat gels decreased by 16.5-82 % and the saturated fatty acids (SFAs) content decreased from 5.87 g/100 g in untreated sample to 1.17-4.88 g/100 g in starch-replacing-fat samples, indicating Oil-CTS could be used as a fat replacer to prepare the low-fat meat products.

Yam Bean (Pachyrhizus erosus L. Urban) Powder Improves Grass Carp Myofibrillar Protein Gel by Forming Disulfide Bonds, Hydrogen Bonds, and Proper Microstructure

This study aimed to analyze the impact of different additions (0-1.25%) of yam bean powder (YBP) on myofibrillar protein (MP) gel characteristics such as the structure, water-holding capacity (WHC), chemical interaction strength of grass carp MP, and texture. The results showed that the YBP exhibited a strong water absorption capacity and filled in the protein heat-induced polymerization gel network well, which enabled the gel network to capture and retain water effectively, resulting in MP gels containing YBP with excellent WHC and gel strength (0.75%). In addition, YBP induced the formation of hydrogen and disulfide bonds in proteins and inhibited the conversion of α-helices to β-sheets and β-turn structures, facilitating the formation of high-strength gel networks (p < 0.05). In conclusion, YBP can significantly improve the thermally induced gelling properties of grass carp MP. In particular, the addition of 0.75% YBP had the best effect in terms of filling the gel network of grass carp MP, resulting in the formation of a continuous and dense protein network, leading to the composite gel with the best WHC and texture.

Recent trends of 3D printing based on starch-hydrocolloid in food, biomedicine and environment

People are exploring the potential application of 3D printing in food, biomedicine and environment, but it is urgent to find suitable bio-ink. Bio-ink compounded with starch and hydrocolloid can not only improve the rheology, structure and printability of starch-based edible bio-ink, but also endow it with other functional characteristics, so that it can be applied to food, biomedicine and even the environment, and meet the strategic needs of national health, green and sustainable development. In this paper, hydrocolloids are reviewed as potential means to regulate the physicochemical properties of starch, which endows it with good printability and presents excellent printing products. The specific applications of the bio-ink in the fields of food, biomedicine and environment in hypoglycemic, lipid-lowering, swallowable food, delivery, intelligent materials, and bio-sensor are also discussed. Then, the challenges and future development trends of realizing large-scale application are prospected. Proper physicochemical properties of starch-hydrocolloid are positively correlated with printability. The presentation of excellent printability has realized the application in different fields, not only satisfies most people, but also create benefits for some specific people. This review is expected to provide some theoretical guidance for the further development of 3D printing technology and its large-scale application.

Effect of gamma irradiation treatment on microstructure, water mobility, flavor, sensory and quality properties of smoked chicken breast

Effect of gamma irradiation on quality, flavor and sensory properties of smoked chicken breasts were investigated. Results indicated irradiation doses >3 kGy were effective for sterilization, while also produced a significant effect on overall quality of smoked chicken breast. Irradiation treatment could inhibit protein oxidation and accelerate lipid oxidation of smoked chicken breasts. High irradiation doses could increase the instability of free and bound water, as well as increase muscle fiber gap and juice loss significantly. Irradiation treatment also promoted free fatty acids and taste-presenting nucleotides degradation, effectively increased fresh-tasting amino acids contents and decreased bitter and sweet-tasting amino acids contents. The types and relative contents of volatiles, especially aldehydes, alcohols, aromatic hydrocarbons, and phenolic compounds, also changed after irradiation, while tartaric, pyruvic, and malic acids decreased. Results obtained can provide valuable reference data for improving the quality and flavor of smoked chicken breasts using gamma irradiation technology.

Insight into the spatial distribution and interaction model of heat-induced micro- and nano-starch/myofibrillar protein blends

This work investigated the gelatinizing and hydration properties of raw and milled tapioca starches at micron and nano scale as well as their effects on gelation of myofibrillar proteins (MP) from Ctenopharyngodon idellus by analyzing rheology, texture and microstructure of heat-induced MP/starch blends. Milling induced starch granules damage to micron and nano scale, causing a fall in starch swelling power and a jump in water solubility. Among raw and milled starches, nano-starch had the best reinforcement effect on MP gel, i.e., MP/nano-starch showed the lowest critical gel concentration, highest G', strongest resistance to deformation and highest texture performance. Correlation analysis revealed that starch water solubility was responsible for the reinforced MP gel rather than starch swelling power. A schematic model was proposed for illustrating the interaction of starches and MP. All the blends had the ordered filamentous network as the basic skeleton, with some starches (granules and their fragments) in the voids or on the edge or surface of MP filaments as inert fillers, and some (chain segments) embedded in the filaments as active fillers. Almost all nano-starch were actively filled into the MP filaments to enhance the strength of filaments, thus achieving the best reinforcement effect on MP gel.

Insight into the effect of garlic peptides on the physicochemical and anti-staling properties of wheat starch

The staling of wheat starch in storage seriously damages the quality of starch-based foods, and how to delay the staling has become a topic focus. To solve the problem, this study analyzed the effect of garlic peptides on the physical and retrogradation behaviors of wheat starch during storage. The rheological, pasting, swelling properties, molecular order, water migration, and microstructure of wheat starch gels were evaluated. Our results showed that garlic peptides effectively reduced the storage and loss modulus of wheat starch. The physical properties indicated that garlic peptides suppressed the swelling and gelatinization of starch, which exhibited higher water holding capacity and lower water migration. In addition, garlic peptides incorporated wheat starch exhibited the lowest gel hardness during storage. X-ray diffraction and Fourier Transform Infrared Spectroscopy analysis indicated that garlic peptides could reduce the crystallinity and inhibit the formation of ordered structures in wheat starch gel. The microstructure observation showed that the gel with garlic peptides maintained the integrity of the network structure. Consequently, garlic peptides are expected to be an effective natural additive to inhibit starch staling and provide new insights for starch-based foods.

The migration and loss of water in emulsified surimi gels prepared with different phase states of lipids: Effect of freeze-thawing treatments

The freeze-thawing (FT) stability generally correlates well with the economic value and acceptability of frozen surimi-based products. However, quality changes of emulsified surimi gels under FT conditions are still unclear. Therefore, the gel properties of samples with different phase states of lipids (lard, lard + soybean oil, and soybean oil) were investigated at FT conditions. Results showed that the soybean oil evidently improved the rheological behaviors of sols/gels compared to the lard group. The moisture content of samples with different lipids decreased by 2.40%-2.71% after 4 FT cycles. With increasing FT cycles, the water-holding capacity decreased accompanied by the increase of cooking loss. Spin-spin relaxation spectra and hydrogen proton density images proved the occurrence of water migration of gels during these processes. Better gel integrity was observed in samples consisting of soybean oil, where the proportion of pores was lower than those with lard regardless of FT treatments. Additionally, the intermolecular forces of gels also changed under FT treatments. There results suggested that the lipids with different phase states affected the migration and loss of water in emulsified surimi gels under FT cycles. PRACTICAL APPLICATION: The quality changes of heating-induced surimi gel products under frozen storage have been ignored, especially the emulsified surimi gels. This study discloses the changes of the gel properties in emulsified gel products with different phase states of lipids after FT treatments, which provides critical insights into the quality improvement of this novel emulsified surimi product during processing, storage, and transportation.

The Relationship between Penetration, Tension, and Torsion for the Fracture of Surimi Gels: Application of Digital Image Correlation (DIC)

A standardized method to evaluate the material properties of surimi gels has to be updated because of the lack of accuracy and the repeatability of data obtained from conventional ways. To investigate the relationships between the different texture measurement methods used in surimi gels, 250 batches of different surimi gels were used. The textural properties of surimi gels made with or without whey protein concentrate (SG-WP), potato starch (SG-PS), or dried egg white (SG-EW) were measured under torsion, tensile, and penetration tests. The correlation between the textural properties related to the deformation and hardness of surimi gels without any added ingredients (SG) was linear (R2 > 0.85). However, the R2 values of the shear strain and tensile strain of SG-WP and SG-EW were significantly lower than that of SG. The strain distributions of surimi gels with and without added ingredients were estimated by digital image correlation (DIC) analysis. The results showed that the local strain concentration in SG-WP and SG-EW was significantly higher than that of SG in the failure ring tensile test and the torsion test (p < 0.05). DIC analysis was an effective tool for evaluating the strain distribution characteristics of surimi gels upon fracture from torsion, penetration, and tension.

Strategies to optimize the structural and functional properties of myofibrillar proteins: Physical and biochemical perspectives

Myofibrillar protein (MP), as the main meat protein, have high nutritional value. However, the relatively poor solubility of MP at low ionic strength sometimes limits the utilization of MP to produce products rich in meat protein. Accordingly, appropriate modification of MP is needed to improve their functional properties. In general, MP modification strategies are categorized into biochemical and physical approaches. Different from other available reviews, the review focuses on summarizing the principles and applications of several techniques of physical modification, briefly depicting biochemical modification as a comparison. Modification of MP with a certain intensity of direct current magnetic field, ultrasound, high pressure, microwave, or radio frequency can improve solubility, emulsification, stability, and gel formation. Of these, magnetic field and microwave-modified MP have shown some potential in reducing salt in meat. These physical techniques can also have synergistic effects with other conditions (temperature, pH, physical or chemical techniques) to compensate for the deficiencies of individual treatment techniques. However, these strategies still need further research for practical applications.HIGHLIGHTSThe current status and findings of research on direct current magnetic field in meat processing are presented.Several physical strategies to modify the microstructure and functional properties of MPs.The synergistic effects of these techniques in combination with other methods to modify MPs are discussed.

Effects and mechanism of antifreeze peptides from silver carp scales on the freeze-thaw stability of frozen surimi

The objective of this work was to investigate the cryoprotective effects of antifreeze peptides obtained from silver carp scales (ScAFPs) on the freeze-thaw stability of surimi, and to explore the action mechanisms of ScAFPs on frozen surimi. The comprehensive analysis of ice crystal size, myofibril protein oxidation, water retention, surimi gel properties, and rheological properties of surimi after different freeze-thaw cycles were investigated. Results showed that frozen surimi treated with ScAFPs exhibited a higher Ca²⁺-ATPase activity, salt-soluble protein concentration and sulfhydryl group content, while lower surface hydrophobicity, carbonyl content and disulfide bond content. Moreover, the gel properties and water holding capacity of surimi and surimi gel were improved significantly by regulating the size of ice crystals during freeze-thaw process. These findings indicate that ScAFPs could serviced as a new food ingredient with anti-freezing function for frozen products.

The Effectiveness of Clove Extract on Oxidization-Induced Changes of Structure and Gelation in Porcine Myofibrillar Protein

This study aimed to investigate the structural characteristics and gelation behavior of myofibrillar proteins (MPs) with or without clove extract (CE) at different oxidation times (0, 1, 3, and 5 h). Circular dichroism spectra and Fourier transform infrared spectra showed that samples with CE addition had significantly higher α-helix content after oxidation than those without CE addition. However, prolonged oxidation (5 h) would make the effect of CE addition less pronounced. Similarly, the ultraviolet-visible (UV) spectra analysis revealed that CE controlled the oxidative stretching of the protein tertiary structure and reduced the exposure of aromatic amino acids. In addition, the particle size and turbidity values of the CE group significantly decreased after oxidation compared to the non-CE group. CE increased the gel strength by 10.05% after 5 h of oxidation, which could be observed by scanning electron microscopy (SEM) as a more homogeneous, dense, less porous, network-like gel structure. Therefore, these results showed that oxidation induced significant changes in the structure and gel properties of MPs, but the addition of CE effectively inhibited these destructive changes.

Effects of quinoa protein Pickering emulsion on the properties, structure and intermolecular interactions of myofibrillar protein gel

The effects of quinoa protein Pickering emulsion (QPE) on the gel properties, protein structure and intermolecular interactions of myofibrillar protein (MP) gels were studied. Compared with the MP gels without QPE, the MP gels with 5.0%-7.5% added QPE showed significant increasing trends in storage modulus (G'), whiteness, gel strength and water holding capacity (WHC). The content of disulfide bonds in the gel increased with the addition of QPE and the disulfide bond conformation changed from gauche-gauche-gauche to gauche-gauche-trans. Moreover, the increase of hydrogen bonds after QPE addition confirmed the transformation from α-helix to β-sheet, as β-sheet structure was stabilized by interchain hydrogen bonds. The added QPE also enhanced the hydrophobic interaction and electrostatic interaction of MP gels. To conclude, the addition of 5.0%-7.5% QPE improved the intermolecular interactions and the structure stability of MP gels, and enhanced the gelation and WHC of MP gels.

Magnetic chitosan stabilized Cu(II)-tetrazole complex: an effective nanocatalyst for the synthesis of 3-imino-2-phenylisoindolin-1-one derivatives under ultrasound irradiation

In the present research, a recyclable catalyst has been prepared via a simple approach using chitosan as a linear polysaccharide. This paper reports the synthesis of novel copper(II) complex of 5-phenyl-1H-tetrazole immobilized on magnetic chitosan (MCS@PhTet@Cu(II)) as an effective catalyst. Transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), vibrating sample magnetometer (VSM), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), and inductively coupled plasma mass spectrometry (ICP-MS) techniques were applied for the characterization of the catalyst. The catalytic activity of MCS@PhTet@Cu(II) was evaluated in the ultrasound-assisted synthesis of 3-imino-2-phenylisoindolin-1-one derivatives via the reaction between benzoyl chloride and arylcyanamides in ethanol at ambient temperature. Utilizing a wide variety of arylcyanamides under mild conditions, no use of toxic organic solvents, moderate reaction time, high yields along with catalyst excellent reusability and easy separation of the products without any tedious separation techniques, made this method a novel and simple process. The resulting heterogeneous catalyst showed valuable advantages such as easier work-up, better stability, and greater separation ability using an external magnet. The catalyst showed high efficacy and recyclability even after five cycles with no significant loss of its efficacy. The present methodology provides a path for the preparation of structurally diverse heterocyclic compounds, which may exhibit important biological activity.

Modified chitosan-zeolite supported Pd nanoparticles: A reusable catalyst for the synthesis of 5-substituted-1H-tetrazoles from aryl halides

A novel heterogeneous catalyst has been developed using chitosan-zeolite supported Pd nanoparticles (PdNPs@CS-Zeo) and used in an efficient synthesis of 5-substituted-1H-tetrazoles from aryl halides with high yields for relatively short reaction times with an easy work-up procedure. In this method, highly effective and reusable PdNPs@CS-Zeo catalyst was used in the reaction of various aryl iodides/bromides with K₄[Fe(CN)₆] as a non-toxic cyanide source to catalyze the [2 + 3] cycloaddition of the corresponding aryl nitriles with NaN₃ in the sequential one-pot preparation of 5-substituted-1H-tetrazoles. The synthesized PdNPs@CS-Zeo nanocatalyst was characterized using XRD, FTIR, TEM, HRTEM, XPS, Raman, TG-DTG, ICP-OES, BET, and EDS mapping. Additionally, the nanocatalyst could be effectively separated by filtration and reused for multiple times without significant decrease of catalytic activity.

The artificial neural network-based QSPR and DFT prediction of lipophilicity for thioguanine

By the importance of exploring anti-cancer properties of thioguanine (TG), the relationships between quantum chemical indices and lipophilicity of TG tautomers were investigated using the quantitative structure-property relationship (QSPR) approach in two isolated and chitosan-encapsulated states. Accordingly, twenty numbers of different tautomeric forms of TG were selected to predict the logP using the QSPR models. Density functional theory (DFT) calculations along with Dragon package were applied to estimate the required quantum chemical descriptors. The Pearson correlation coefficient statistical test and Kennard-Stone algorithm were used to measure the statistical relationship and data splitting into training and testing set, respectively. Furthermore, the multiple linear regression (MLR) and artificial neural network (ANN) methods were employed for generating the models. In this regard, the analysis of variance (ANOVA) was used to form a basis criterion for testing the significance of MLR and ANN results. Moreover, the leave one out (LOO) method was used for examining the prediction efficiency of select models. The obtained result indicated benefits of proposed models for predicting reliable results of logP.

Fabrication of chitosan-based food packaging film impregnated with turmeric essential oil (TEO)-loaded magnetic-silica nanocomposites for surimi preservation

Successful modification of chitosan (CS) film using magnetic-silica nanocomposite to encapsulate turmeric essential oil (TEO) obtained by super critical CO2 extraction for enhanced preservation of surimi was performed. TEO exhibited antioxidant and antibacterial activities against Bacillus cereus. The core magnetic nanoparticles (MNPs) were capped with porous silica (Si) to form core-shell nanocomposites, into which TEO was loaded with 75.24% encapsulation efficiency. The fabricated nanocomposite was characterized, blended with CS to cast a bionanocomposite active film and characterized for efficient impregnation of bionanocomposite. The physical and mechanical properties of film were significantly improved after adding MNPs/Si/TEO nanocomposite. Uncontrolled release of TEO from CS film resulted in bacterial growth after 6 days of storage whereas bionanocomposites exhibited a sustained release of TEO that controlled the microbial load from 4.0 log CFU/g to 2.78 log CFU/g over 14 days. The overall study demonstrated that the CS/MNPs/Si/TEO bionanocomposite film was efficient as a packaging material for prolonged shelf-life of surimi.

Changes in Gel Structure and Chemical Interactions of Hypophthalmichthys molitrix Surimi Gels: Effect of Setting Process and Different Starch Addition

The modifications of histological properties and chemical forces on heated surimi gels with starch addition (0-12 g/100 g surimi) were investigated. Two types of heating processes (direct heating and two-step heating) were carried out on surimi gels in order to reveal the effect of setting on mixed matrices. The results of transverse relaxation time showed less immobile water and free water converted into bound water in a matrix subjected to the setting process. Scanning electron microscope and light microscopy images revealed inefficient starch-swelling in two-step heated gels. Chemical interactions and forces in direct cooking gels were more vulnerable to starch addition, resulting in significant decreases in hydrophobic interaction and sulfhydryl content (p < 0.05). With the increment of starch, the disulfide stretching vibrations of the gauche-gauche-gauche conformation were reduced in both gel matrices. The structural variations of different components collectively resulted in changes in texture profile analysis and water holding capacity. Overall, the results demonstrated that starch addition had a great and positive effect on the weak gel matrix by direct heating.