Improving method, properties and application of polysaccharide as emulsifier

A nanoemulgel formulation of acetylated Crataegus pinnatifida polysaccharide for the treatment of skin photoaging in mice

Ultraviolet (UV) radiation is a primary factor contributing to photoaging, a form of premature skin aging characterized by the appearance of wrinkles, fine lines, uneven pigmentation, and reduced skin elasticity. Plant-derived polysaccharides exhibit notable antioxidant and anti-inflammatory properties, making them promising candidates for the management of skin photoaging. Nevertheless, the hydrophilic nature and large molecular size of polysaccharides make them less effective for topical application. This study aimed to develop a method to increase polysaccharide transdermal absorption, using Crataegus pinnatifida polysaccharide (CPP) as a model. Acetylation was employed to modify the CPP, yielding three derivatives with varying degrees of substitution (DS): 0.16 (Ace-CPP1), 0.43 (Ace-CPP2), and 0.56 (Ace-CPP3). The in vitro antioxidant activity increased with increasing degree of substitution. A nanoemulgel formulation was developed, achieving approximately 72 % permeation of the native CPP. Furthermore, the acetylated CPP derivatives demonstrated enhanced permeation, exceeding 92 % within 4 h. In vivo studies revealed that the Ace-CPP3-based nanoemulgel significantly outperformed the native CPP in alleviating UVB-induced photoaging. This was evidenced by reduced oxidative stress, suppression of tissue inflammation, and promotion of collagen deposition. These findings underscore the potential of nanoemulgel formulation of acetylated CPP derivatives to advance applications in dermatology and cosmeceuticals.

The delivery carriers and applications for Xiaobojian

Berberine, also known as Xiaobojian (XBJ), is a quaternary ammonium alkaloid isolated from the traditional Chinese medicine Coptis chinensis, and is the main effective ingredient for antibacterial purpose. This work systematically reviewed recent researches on XBJ in the whole range of delivery technologies. Compared with XBJ monomer administration, other forms of drug administration, such as tablets, pellets, XBJ polymer delivery system, lipid delivery system, superdeformed vesicles nanocrystallization or emulsification of XBJ and some special substances, will increase the absorption of XBJ. XBJ can be administered through various carriers, including oral administration and topical application. The importance of XBJ carrier administration is mainly reflected in wide application prospects, various pharmacological effects, and improving drug efficacy.

Effects of molecular weight of chitosan on its binding ability with OSA starch and oil-water interface behavior of complex-stabilized emulsion

This work examined the effects of molecular weight (2-15 kDa) and concentration (10-30 mg/mL) of chitosan (CTS) on the binding capacity and interface behavior between octenyl succinic acid sodium starch (OSS) and CTS, as well as their effects on the storage stability of emulsions. The results of the isothermal calorimetry titration demonstrated that OSS and CTS were complexed by electrostatic interaction and spontaneous hydrogen bonding driven by enthalpy (ΔH from -3931 to -7983 cal/mol, ΔS from -38.5 to -49.2 cal/mol/deg., ΔG from -6436.6 to -7542.0 cal/mol), and the affinity and binding capacity (N = 2.83-22.90 sites) were reinforced with CTS molecular weight. The interfacial adsorption kinetics revealed that the OSS/CTS complexes with high-molecular-weight CTS exhibited a markedly accelerated rate of interfacial diffusion and recombination, and rapidly reduced interfacial tension. CTS incorporation enhanced mass (1980.32-3522.56 ng/cm2), thickness (35.12-51.29 nm), viscosity (52.81-67.06 kPa), and elasticity (1.70-3.49 kPa) of interfacial film through the dissipative quartz crystal microbalance. OSS/CTS complexes displayed superior emulsification properties and adjustable interfacial viscoelastic ratio in response to frequency interference. Emulsions stabilized by the OSS/CTS complexes with high molecular weight and concentration of CTS exhibited more uniform spherical structures and superior storage stability. This work will facilitate the broader utilization of OSS and CTS in the emulsion delivery system.

Unlocking flaxseed oleosomes (oil bodies) potential: Optimal extraction and functional insights through enzymolysis or dehulling treatment

Oleosomes are intracellular vesicles within a phospholipid monolayer membrane and have significant potential for use in various food applications as natural emulsions. Flaxseed, an underexplored yet promising crop, shows promise for oleosome utilization. However, the high mucopolysaccharide content in hulls may pose challenges to the extraction efficiency of natural flaxseed oleosomes (N-FOs). In this study, two pretreatment methods were employed prior to aqueous extraction: enzymatic hydrolysis using a cellulase-pectinase-xylanase cocktail and dehulling. Both pretreatment methods significantly improved the extraction yield, with dehulling flaxseed oleosomes (D-FOs) achieving 51.3 % and enzymatically hydrolyzed flaxseed oleosomes (E-FOs) reaching 53.1 %, representing an increase by a factor of five compared to N-FOs. The average droplet size of E-FOs ranged from 1.5 to 1.7 μm across pH 2.0 to pH 10.0, while the absolute value of the zeta-potential for E-FOs at pH 10.0 was the highest at -39.6 mV. Cryo-SEM imaged that E-FOs and N-FOs exhibited a more complete structure than D-FOs, which might be attributed to the increased electrostatic repulsion generated by flaxseed protein and spatial hindrance of incompletely hydrolyzed polysaccharides. LF-NMR spectra showed shorter T2 values of E-FOBs, confirming increased interactions between residual polysaccharides and oleosomes. The tight and solid-like interfacial film affirmed by the emulsifying activity and rheological results could protect emulsion droplets against flocculation and disproportionation, thus contributing to enhanced emulsification stability. Enzymatic hydrolysis demonstrated a favorable balance between extraction yield and functional properties compared to dehulling or no pretreatment, making it a suitable approach for efficient oleosome extraction from flaxseeds for various plant-based food applications.

Characterization and Rheological Properties of a New Exopolysaccharide Overproduced by Rhizobium sp. L01

The exopolysaccharides produced by rhizobia play an important role in their biotechnological and bioremediation properties. The characteristics and properties of an exopolysaccharide produced by Rhizobium sp. L01 were investigated. Strain Rhizobium sp. L01 was identified as Rhizobium tropici and produced a high yield of exopolysaccharides (REPS-L01), reaching 22.8 g/L after 63 h of fermentation in a 5 L bioreactor with glucose as the carbon source. REPS-L01 was composed of glucose and galactose in a ratio of 2.95:1, carrying pyruvate, acetate, and succinate groups. REPS-L01 had good shear-thinning properties in aqueous solutions at various concentrations and revealed typical non-crosslinked polymer properties. REPS-L01 revealed thermal stability up to 275 °C. REPS-L01 had the potential to be thicker, being suitable for use under conditions ranging from 4 to 60 °C, pH between 2 and 12, and salt concentrations up to 20,000 mg/L. REPS-L01 showed strong emulsifying activity, particularly with n-hexane; even at concentrations as low as 0.25 wt%, the emulsification index could reach more than 50%. Even more impressively, stable n-hexane emulsion gel was formed with 2 wt% REPS-L01 solution. Rheological studies showed that the solid-like emulsion gel had a high storage modulus, and the SEM studies of the emulsion gel indicated that n-hexane could fill the pores of REPS-L01.

Quinoa Polysaccharides: Extraction, Purification, Structure, Functional Properties, and Applications in Food Science and Health

Quinoa polysaccharides have attracted significant research interest in recent years due to their diverse biological activities, including antiviral, anti-inflammatory, antioxidant, and immunoregulatory properties. These attributes align with the growing global demand for natural, functional food ingredients, positioning quinoa polysaccharides as a valuable resource in food science and technology. This review presents an overview of the various bioactivities of quinoa polysaccharides, critically evaluates the methods used for their extraction and purification, describes their structural characteristics, and discusses their practical applications across multiple areas within the food industry, including food additives, meat products, health foods, and innovative food packaging. This study examines the relationship between the preparation methods and the structural characteristics of quinoa polysaccharides, as well as their versatile applications in the food industry, such as improving product quality and shelf life, enhancing nutritional value and antioxidant activity, and providing health benefits in functional foods. This review also emphasizes the need for further research on the emulsification and gelation properties of quinoa polysaccharides and highlights their significant market potential, driven by their diverse functional properties. From our perspective, quinoa polysaccharides, with their wide range of functional and health benefits, hold a promising future in the food and health industries, driven by technological advancements and consumer demands.

Preparation and characterization of microcrystalline cellulose from rice bran

BACKGROUND

Rice bran, a by-product of rice processing, has not been fully utilized except for the small amount used for raising animals. The raw material source requirements of microcrystalline cellulose are becoming increasingly extensive. However, the characteristics of preparing microcrystalline cellulose from rice bran have not been reported, which limits the application of rice bran.

RESULTS

Microcrystalline cellulose was obtained from rice bran by alkali treatment, delignification, bleaching and acid hydrolysis. The morphology, particle size distribution, degree of polymerization, crystallinity, and thermal stability of rice bran microcrystalline cellulose were analyzed. The chemical compositions, scanning electron microscopy and Fourier-transform infrared analysis for rice bran microcrystalline cellulose showed that the lignin and hemicellulose were successfully removed from the rice bran fiber matrix. The morphology of rice bran microcrystalline cellulose was shown to be of a short rod-shaped porous structure with an average diameter of 65.3 μm. The polymerization degree of rice bran microcrystalline cellulose was 150. The X-ray diffraction pattern of rice bran microcrystalline cellulose showed the characteristic peak of natural cellulose (type I), and its crystallization index was 71%. The rice bran microcrystalline cellulose may be used in biological composites with temperatures between 150 °C and 250 °C.

CONCLUSION

These results suggest the feasibility of using rice bran as a low-price source of microcrystalline cellulose. © 2024 Society of Chemical Industry.

A novel gellan-based nanoemulgel delivery system for co-encapsulation and in vitro digestion of hydrophilic/hydrophobic nutraceuticals

Preventive healthcare strategies are gaining attention over traditional approach of treating and managing diseases. The use of food hydrocolloids has garnered interest in developing innovative food formulations promoting healthy eating habits. Among emerging carrier systems, nanoemulgel holds significant potential with its ability to deliver hydrophilic and lipophilic nutraceuticals through a combination of nanoemulsion and hydrogel technology. For the first time, this study utilized gellan as an emulsifier and gelling agent to develop a novel nanoemulgel functional food system. Initially, a nanoemulsion composed of gellan and clove oil was prepared, having an average size of 40.10 ± 9.42 nm, which was stable under different physiological conditions. Further, nanoemulsion was combined with gellan hydrogel fabricated using ʟ-Glutamic acid as bio-linker to formulate nanoemulgel that was characterized thoroughly. We employed this system to co-encapsulate hydrophobic naringenin and hydrophilic vitamin B12. Additionally, encapsulation efficiency and release rate studies revealed high stability of bioactive at acidic pH. Moreover, release mechanism followed Korsmeyer-Peppas model and zero-order kinetics. During simulated in vitro digestion studies, site-directed release of nutraceuticals was observed. Therefore, present study represents a significant effort in developing novel functional food systems that aid in disease prevention and maintaining healthy lifestyle.

Ultrasound-Assisted Ionic Liquid Extraction of Polysaccharides From Crataegus songarica K. Koch Fruits: Structural Characterization and Antioxidant Activity

In this study, we optimal the ultrasound-assisted ionic liquid extraction (UAILE) process of polysaccharides from Crataegus songarica K. Koch fruits. The optimal conditions determined were ultrasonic power of 400 W, temperature of 79°C, extraction time of 78 min, ethylammonium dodecyl sulfate (EADS) concentration of 1.52 mg/mL, and liquid-solid ratio of 51:1 mL/g. Under these conditions, the polysaccharides yield was 34.37%, which was significantly higher than that obtained by the conventional ultrasound-assisted extraction (UAE) and hot water extraction (HWE) methods. After purification, we studied the chemical composition, physicochemical properties, and structural characteristics of polysaccharides (CSP). The results showed that CSP is a heteropolysaccharide containing α-linkage glucopyranose, which is mainly composed of mannose, arabinose, galactose, and glucose, with a molecular weight (Mw) of 27.82 × 104 Da. In addition, CSP demonstrated significant free radical scavenging ability and was able to efficiently reduce the H2O2-induced HepG2 cellular malondialdehyde (MDA) content, while enhancing superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) activities, showing its superior antioxidant activity. On the basis of these properties, CSP is expected to be used as a novel efficacy factor in the food and pharmaceutical industries.

Characterization and Pickering emulsifying ability of Adinandra nitida leaf polysaccharides

Herein, Adinandra nitida leaf polysaccharides (ANPs) were isolated, identified, and used as a particle emulsifier to stabilize Pickering emulsions. ANP was identified as a polysaccharide with a weight-average molecular weight of 383.10 ± 8.57 kDa that was mainly composed of galacturonic acid (43.94 ± 3.63 mol%), arabinose (17.44 ± 1.06 mol%), glucose (8.53 ± 0.65 mol%), and rhamnose (4.88 ± 0.32 mol%). The main glycosidic linkages included t-Ara(f)-(1→, →4)-Gal(p)-(1→, and →4)-Gal(p)-UA-(1→, with molar percentage ratios of 8.97 %, 19.68 %, and 47.05 %, respectively. ANP possessed a reducing power and ABTS radical scavenging ability. ANP could also reduce the interfacial tension between medium-chain triglycerides (MCT) and water in a concentration-dependent manner, demonstrating its emulsifying role. When the addition amount (c) ≥ 3 %, ANP could stabilize the O/W-type MCT-based Pickering emulsion gel with an oil-phase volume fraction of 70 %, and c was proportional to mechanical parameters such as gel strength, macroscopic viscosity index, and elastic index.

A new thermochromic crystal violet lactone/lactic acid/myristyl alcohol ternary mixture encapsulated with a poplar-based cellulose/lignin/SiO2 framework

Two thermochromic poplar-based composites, TPC-1 and TPC-2, were fabricated using a crystal violet lactone (CVL)/lactic acid/myristyl alcohol ternary mixture. The mass ratios for TPC-1 and TPC-2 were 10: 3: 200 and 10: 80: 200, respectively. TPC-1 exhibits a common thermochromic property, reversibly changing color from blue to the natural hue of poplar within the temperature range of 28-48 °C. In contrast, TPC-2 demonstrates a novel thermochromic behavior, shifting from light blue to dark blue within the range of 30-52 °C. This work elucidates the correlations between the distinctive mass ratios in the ternary mixtures, the resulting CVL structures, and the consequent thermochromic properties. The blue TPC-1 exhibits an open lactone ring with a HO-C=O in its CVL structure. Similarly, the light-blue TPC-2 displays an open lactone ring with a HO-C=O. However, the dark-blue TPC-2 features an open lactone ring with a HO-C=O and a C-O-C. TPC-2 is a ternary mixture encapsulated with a poplar-based cellulose/lignin/SiO2 framework. This integrated framework chemically interacts with the ternary mixture, enhancing phase-changing properties, heat-saving capabilities and mechanical properties of TPC-2. Consequently, TPC-2 is a promising candidate for applications as a temperature-responsive, thermal energy-storing, and structural material in building interiors.

Enhanced Rheological and Structural Properties of the Exopolysaccharide from Rhizobium leguminosarum VF39 Through NTG Mutagenesis

Microbial exopolysaccharides (EPSs) are biopolymer materials with advantages such as biodegradability, biocompatibility, ease of mass production, and reproducibility. The EPS that was isolated from Rhizobium leguminosarum bv. viciae VF39 is an anionic polysaccharide with a backbone structure consisting of one galactose, five glucose molecules, and two glucuronic acids, along with 3-hydroxybutanoyl, acetyl, and pyruvyl functional groups. Through N-methyl-N'-nitro-N-nitrosoguanidine (NTG) mutagenesis, we isolated and purified a mutant EPS from VF39, VF39 #54, which demonstrated enhanced physicochemical and rheological properties compared to the wild-type VF39. The EPS structure of the VF39 #54 mutant strain showed a loss of glucuronic acid and 3-hydroxybutanoyl groups compared to the wild-type, as confirmed by FT-IR, NMR analysis, and uronic acid assays. The molecular weight of the VF39 #54 EPS was 250% higher than that of the wild-type. It also exhibited improved viscoelasticity and thermal stability. In the DSC and TGA analyses, VF39 #54 had a higher endothermic peak (172 °C) compared to the wild-type (142 °C), and its thermal decomposition point was 260 °C, surpassing the wild-type's value of 222 °C. Additionally, the VF39 #54 EPS maintained a similar viscosity to the wild-type in various pH, temperature, and metal salt conditions, while also exhibiting a higher overall viscosity. The cytotoxicity test using HEK-293 cells confirmed that the VF39 #54 EPS was non-toxic. Due to its high viscoelastic properties, the VF39 #54 EPS shows potential for use in products such as thickeners, texture enhancers, and stabilizers. Furthermore, its thermal stability and biocompatibility make it a promising candidate for applications in food, pharmaceuticals, and cosmetic formulations. Additionally, its ability to maintain viscosity under varying environmental conditions highlights its suitability for industrial processes that require consistent performance.

Impact of processing and storage on citrus fiber functionality: Insights from spectroscopic techniques

To deliver their functionality when used in applications, citrus fibers need to be rehydrated. Factors such as chemical composition, structural organization as well as chemical surface composition are known to influence this functionality. Processing and storage conditions can affect these parameters, making it challenging to maintain stable functionality. This study used Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) to evaluate the effects of preparation and storage on citrus fibers. Samples dried at different scales and stored for 360 days under room and accelerated conditions were assessed for water holding capacity (WHC), water swelling capacity (WSC), and gel rigidity (G'). The results showed a decline in WHC, WSC, and G' over time, confirming that aging negatively impacts moisture retention, particularly under higher water content or temperature. Drying scale had no effect on chemical composition or structure, but changes in the elemental surface composition of carbon and oxygen were noted. While prolonged storage altered the polysaccharides' chemical composition and structure, leading to functionality loss, XPS analysis revealed no changes in surface composition. Loss of functionality cannot be explained by chemical surface composition modifications.

Chitosan-based emulsive liquid-liquid microextraction for the determination of strobilurin fungicides in water samples

Strobilurin fungicides are widely used pesticides globally; however, their residues pose a risk to environmental safety and human health. This study aimed to develop a rapid and green method for detecting strobilurin fungicide residues. Chitosan and magnetic deep eutectic solvent-based emulsive liquid-liquid microextraction method combined with high-performance liquid chromatography was developed to determine strobilurin fungicides in water samples. A high-concentration oil-in-water emulsion containing chitosan solution and extractant was formulated, followed by the addition of samples to form a low-concentration oil-in-water emulsion to complete the rapid pretreatment, therefore solving the limitation of emulsive liquid-liquid microextraction in the inapplicability of extractants. Traditional microextraction required toxic solvents and complex equipment to facilitate the dispersion of extractants, whereas this study used only chitosan solution to aid in emulsifying extractants. The new green magnetic deep eutectic solvent synthesized by tetraoctylammonium bromide, ferric chloride, and oleic acid was used instead of toxic extractants. An external magnetic field assisted the extractant phase collection, which shortened the separation time. Under optimal conditions, the recovery of this method was 83.3 %-107.4 %, the limit of detection was 0.0010-0.0021 mg L-1, and the coefficient of determination was >0.994. This rapid, green, simple, and efficient chitosan-based microextraction method could detect strobilurin fungicide residues in water samples because of its enhanced compatibility with hydrophobicity extractants.

Spatially selective catalysis of OSA starch for preparation of Pickering emulsions with high emulsification properties

The traditional strategies of chemical catalysis and biocatalysis for producing octenyl succinic anhydride modified starch can only randomly graft hydrophobic groups on the surface of starch, resulting in unsatisfactory emulsification performance. In this work, a lipase-inorganic hybrid catalytic system with multi-scale flower like structure is designed and applied to spatially selective catalytic preparation of ocenyl succinic anhydride modified starch. With the appropriate floral morphology and petal density, lipases distributed in the "flower center" can selectively catalyze the grafting of hydrophobic groups in a spatial manner, the hydrophobic groups are concentrated on one side of starch particles. The obtaining OSA starch exhibits excellent emulsifying property, and the pickering emulsion has good protective effect on the embedded curcumin. This work provides a direction for the development of high-performance starch-based emulsifiers for the food and pharmaceutical industries, which is of great significance for improving the preparation and emulsification theory research of modified starch.

Adsorption study on the formation of interfacial layers based on birch glucuronoxylans

Glucuronoxylans (GX), particularly crude fractions obtained by pressurized hot water extraction of birch wood, act as potent emulsifiers and stabilizers against physical separation and lipid oxidation. Herein, we studied the adsorption of GX on hydrophobic interfaces to correlate their multicomponent character towards the formation of interfacial layers in emulsions. Dynamic interfacial tension (DIFT) and quartz crystal microgravimetry with dissipation monitoring (QCM-D) were applied to various GX fractions and the results compared with those from cellulose-based emulsifiers. The roles of residual lignin and polysaccharides are discussed considering the formation of interfacial layers during emulsification. The DIFT of the different GXs reached quasi-equilibrium faster as the lignin concentration increased, implying a correlation between the rate of adsorption and the residual lignin content. The effect of NaCl addition was more pronounced in polysaccharide-rich fractions, indicating that the polysaccharide fraction modulated the effect of ionic strength. QCM-D showed that despite the fast adsorption exhibited by the lignin-rich GX extract in the DIFT curves, the adsorbed materials were lightweight, suggesting that the polysaccharide fraction built the bulk of the interfacial layer. These results provide a foundation towards understanding the role of GX in interfacial stabilization beyond traditional plant-based counterparts.

Simple Genomic Traits Predict Rates of Polysaccharide Biodegradation

Natural and chemically modified polysaccharides are extensively employed across a wide array of industries, leading to their prevalence in the waste streams of industrialized societies. With projected increasing demand, a pressing challenge is to swiftly assess and predict their biodegradability to inform the development of new sustainable materials. In this study, we developed a scalable method to evaluate polysaccharide breakdown by measuring microbial growth and analyzing microbial genomes. Our approach, applied to polysaccharides with various structures, correlates strongly with well-established regulatory methods based on oxygen demand. We show that modifications to the polysaccharide structure decreased degradability and favored the growth of microbes adapted to break down chemically modified sugars. More broadly, we discovered two main types of microbial communities associated with different polysaccharide structures─one dominated by fast-growing microbes and another by specialized degraders. Surprisingly, we were able to predict biodegradation rates based only on two genomic features that define these communities: the abundance of genes related to rRNA (indicating fast growth) and the abundance of glycoside hydrolases (enzymes that break down polysaccharides), which together predict nearly 70% of the variation in polysaccharide breakdown. This suggests a trade-off, whereby microbes are either adapted for fast growth or for degrading complex polysaccharide chains, but not both. Finally, we observe that viral elements (prophages) encoded in the genomes of degrading microbes are induced in easily degradable polysaccharides, leading to complex dynamics in biomass accumulation during degradation. In summary, our work provides a practical approach for efficiently assessing polymer degradability and offers genomic insights into how microbes break down polysaccharides.

Polysaccharides from Platycodon grandiflorum: A review of their extraction, structures, modifications, and bioactivities

Platycodon grandiflorum (P. grandiflorum) has long been used as a food and traditional herbal medicine. As a food, P. grandiflorum is often transformed into pickles for consumption, and as a traditional Chinese medicine, P. grandiflorum clears the lung, nourishes the pharynx, dispels phlegm, and discharges pus. Polysaccharides are among the main active components of P. grandiflorum. Recent literature has described the preparation, identification, and pharmacological activity of these polysaccharides. Studies have shown that these polysaccharides exhibit a variety of significant biological effects in vitro and in vivo, such as immune stimulation and antioxidant, anti-liver injury, anti-apoptosis and antitumour effects. However, there is no systematic summary of the related research articles on P. grandiflorum polysaccharide, which undoubtedly brings some difficulties to the future research. The purpose of this review is to comprehensively describe research progress on the extraction, purification, structural characterization, modification, and biological activity of P. grandiflorum polysaccharides. The shortcomings of recent research are summarized, further research on their biological activity is proposed to provide new reference value for the application of P. grandiflorum polysaccharides in drugs and health products in the future.

Effect of structural characteristics on the physicochemical properties and functional activities of dietary fiber: A review of structure-activity relationship

Dietary fibers come from a wide range of sources and have a variety of preparation methods (including extraction and modification). The different structural characteristics of dietary fibers caused by source, extraction and modification methods directly affect their physicochemical properties and functional activities. The relationship between structure and physicochemical properties and functional activities is an indispensable basic theory for realizing the directional transformation of dietary fibers' structure and accurately regulating their specific properties and activities. In this paper, since a brief overview about the structural characteristics of dietary fiber, the effect of structural characteristics on a variety of physicochemical properties (hydration, electrical, thermal, rheological, emulsifying property, and oil holding capacity, cation exchange capacity) and functional activities (hypoglycemic, hypolipidemic, antioxidant, prebiotic and harmful substances-adsorption activity) of dietary fiber explored by researchers in last five years are emphatically reviewed. Moreover, the future perspectives of structure-activity relationship are discussed. This review aims to provide theoretical foundation for the targeted regulation of properties and activities of dietary fiber, so as to improve the quality of their applied products and physiological efficiency, and then to realize high value utilization of dietary fiber resources.

Stabilization of emulsions prepared by ball milling and cellulase treated pomelo peel insoluble dietary fiber: Integrity of porous fiber structure dominates the stability

Emulsion gels from the pomelo peel insoluble dietary fiber (PIDF) were developed. The emulsification potentials of PIDFs subjected to various degrees of ball milling (M-PIDFs), cellulase hydrolysis (C-PIDF), and cellulase hydrolysis followed by ball milling (CM-PIDFs) were evaluated. Emulsions prepared by M-PIDFs for different lengths of ball milling time exhibited similar stability characteristics, confirming that M-PIDF emulsion stability might be determined by the three-dimensional structure formed by M-PIDF stacking and oil droplet capture. C-PIDF had characteristics resembling those of Pickering particles. CM-PIDF emulsions got destabilized with ball milling time prolongation. Interface tension and particle size of C/CM-PIDF decreased gradually during ball milling. Rheological and fluorescence microscopy results revealed that the intact internal crosslinking structure frameworks were disrupted in CM-PIDF emulsions. Therefore, intact fiber-based networks, rather than small particle size or low interfacial tension, determine the stability of PIDF emulsions. This study deepens the understanding of PIDF as a clean emulsifier.

Oriented Interpenetrating Capillary Network with Surface Engineering by Porous ZnO from Wood for Membrane Emulsification

Membrane emulsification technology has garnered increasing interest in emulsion preparation due to controllable droplet size, narrower droplet size distribution, low energy consumption, simple process design and excellent reproducibility. Nevertheless, the pore structure and surface engineering in membrane materials design play a crucial role in achieving high-quality emulsions with high throughput simultaneously. In this work, an oriented interpenetrating capillary network composed of highly aligned and interconnected wood cell lumens has been utilized to fabricate an emulsion membrane. A novel honeycomb porous ZnO layer obtained by a seed prefabrication-hydrothermal growth method was designed to reconstruct wood channel surfaces for enhanced microfluid mixing. The results show that through the unique capillary mesh microstructure of wood, the emulsion droplets were smaller in size, had narrower pore-size distribution, and were easy to obtain under high throughput conditions. Meanwhile, a well-designed ZnO layer could further improve the emulsion quality of a wood membrane, while the emulsifying throughput is still maintained at a higher level. This demonstrates that the convection process of the microfluid in these wood capillary channels was intensified markedly. This study not only develops advanced membrane materials in emulsion preparation, but also introduces a brand-new field for functional applications of wood.

Glycated Walnut Meal Peptide-Calcium Chelates: Preparation, Characterization, and Stability

Finding stable and bioavailable calcium supplements is crucial for addressing calcium deficiency. In this study, glycated peptide-calcium chelates (WMPHs-COS-Ca) were prepared from walnut meal protein hydrolysates (WMPHs) and chitosan oligosaccharides (COSs) through the Maillard reaction, and the structural properties and stability of the WMPHs-COS-Ca were characterized. The results showed that WMPHs and COSs exhibited high binding affinities, with a glycation degree of 64.82%. After glycation, Asp, Lys, and Arg decreased by 2.07%, 0.46%, and 1.06%, respectively, which indicated that these three amino acids are involved in the Maillard reaction. In addition, compared with the WMPHs, the emulsifying ability and emulsion stability of the WMPHs-COS increased by 10.16 mg2/g and 52.73 min, respectively, suggesting that WMPHs-COS have better processing characteristics. After chelation with calcium ions, the calcium chelation rate of peptides with molecular weights less than 1 kDa was the highest (64.88%), and the optimized preparation conditions were 5:1 w/w for WMPH-COS/CaCl2s, with a temperature of 50 °C, a chelation time of 50 min, and a pH of 7.0. Scanning electron microscopy showed that the "bridging role" of WMPHs-COS changed to a loose structure. UV-vis spectroscopy and Fourier transform infrared spectrometry results indicated that the amino nitrogen atoms, carboxyl oxygen atoms, and carbon oxygen atoms in WMPHs-COS chelated with calcium ions, forming WMPHs-COS-Ca. Moreover, WMPHs-COS-Ca was relatively stable at high temperatures and under acidic and alkaline environmental and digestion conditions in the gastrointestinal tract, indicating that WMPHs-COS-Ca have a greater degree of bioavailability.

Exploring fungal bioemulsifiers: insights into chemical composition, microbial sources, and cross-field applications

The demand for emulsion-based products is crucial for economic development and societal well-being, spanning diverse industries such as food, cosmetics, pharmaceuticals, and oil extraction. Formulating these products relies on emulsifiers, a distinct class of surfactants. However, many conventional emulsifiers are derived from petrochemicals or synthetic sources, posing potential environmental and human health risks. In this context, fungal bioemulsifiers emerge as a compelling and sustainable alternative, demonstrating superior performance, enhanced biodegradability, and safety for human consumption. From this perspective, the present work provides the first comprehensive review of fungal bioemulsifiers, categorizing them based on their chemical nature and microbial origin. This includes polysaccharides, proteins, glycoproteins, polymeric glycolipids, and carbohydrate-lipid-protein complexes. Examples of particular interest are scleroglucan, a polysaccharide produced by Sclerotium rolfsii, and mannoproteins present in the cell walls of various yeasts, including Saccharomyces cerevisiae. Furthermore, this study examines the feasibility of incorporating fungal bioemulsifiers in the food and oil industries and their potential role in bioremediation events for oil-polluted marine environments. Finally, this exploration encourages further research on fungal bioemulsifier bioprospecting, with far-reaching implications for advancing sustainable and eco-friendly practices across various industrial sectors.

Effect of Different Molecular Weight Hyaluronic Acids on Skim Milk Functional Properties

Hyaluronic acid (HA), a naturally occurring polysaccharide with recognized health benefits, has gained approval for use in the food industry as a food additive, ingredient, and health supplement in numerous countries. HA can increase viscosity in solutions and is available commercially in various molecular weights (MW) depending on end applications. Nevertheless, no research has explored the impact of different MW HAs on functionality, rheological properties, and texture-building benefits in the dairy product matrix wherein they are incorporated. Therefore, the objective of this study was to evaluate how varying MWs of HA-specifically 8 kDa, 320 kDa, 980 kDa, and 2550 kDa at 0.25% (w/w) concentration-impact rheological characteristics, functional attributes, heat stability, protein stability, protein structure, and protein fractions within skim milk. The addition of HA led to an increase in the apparent viscosity of all samples. A higher G″ value over G' values for all HA samples was observed in frequency sweep, indicating the absence of interparticle interactions between HA particles. Protein stability and heat stability were significantly lower for 980 kDa and 2550 kDa HA as compared to the control and 8 kDa HA samples. As the MW increased, WHC, emulsion properties, and foaming stability notably increased. However, reversed results were found in the case of foaming activity. Moreover, no significant changes were observed in the percent area of individual protein fractions and the hydrodynamic diameter of protein particles. This study would help to understand the effect of HA when incorporated in dairy products for water binding or enhancement in viscosity-based applications.

Structurally Modified Polysaccharides: Physicochemical Properties, Biological Activities, Structure-Activity Relationship, and Applications

Polysaccharides are an important class of biomolecules derived from several sources. However, the inherent structure of polysaccharides prevents them from exhibiting favorable physicochemical properties, which restricts their development in agriculture, industry, food, and biomedicine. This paper systematically summarizes the changes in the primary and advanced structures of modified polysaccharides, and focuses on the effects of various modification methods on the hydrophobicity, rheological properties, emulsifying properties, antioxidant activity, hypoglycemic, and hypolipidemic activities of polysaccharides. Then there is a list the applications of modified polysaccharides in treating heavy metal pollutants, purifying water resources, improving beverage stability and bread quality, and precisely delivering the drug. When summarized and reviewed, the information above can shed further light on the relationship between polysaccharide structure and function. Determining the structure-activity relationship provides a scientific basis for the direction of molecular modifications of polysaccharides.

Emulsification Characteristics of Insoluble Dietary Fibers from Pomelo Peel: Effects of Acetylation, Enzymatic Hydrolysis, and Wet Ball Milling

To improve the application potential of pomelo peel insoluble dietary fiber (PIDF) in emulsion systems, acetylation (PIDF-A), cellulase hydrolysis (PIDF-E), and wet ball milling (PIDF-M) were investigated in this paper as methods to change the emulsification properties of PIDF. The impact of the methods on PIDF composition, structure, and physicochemical properties was also assessed. The results demonstrated that both acetylation modification and cellulase hydrolysis could significantly improve the emulsification properties of PIDF. The emulsions stabilized with PIDF-A and PIDF-E could be stably stored at 25 °C for 30 d without phase separation at particle concentrations above 0.8% (w/v) and had higher storage stability: The D4,3 increments of PIDF-A- and PIDF-E-stabilized emulsions were 0.98 μm and 0.49 μm, respectively, at particle concentrations of 1.2% (w/v), while the storage stability of PIDF-M-stabilized emulsion (5.29 μm) significantly decreased compared with that of PIDF (4.00 μm). Moreover, PIDF-A showed the highest water retention capacity (21.84 g/g), water swelling capacity (15.40 mL/g), oil retention capacity (4.67 g/g), and zeta potential absolute (29.0 mV) among the PIDFs. In conclusion, acetylation modification was a promising method to improve the emulsifying properties of insoluble polysaccharides.

Effects of different extraction methods on the physico-chemical characteristics and biological activities of polysaccharides from Clitocybe squamulosa

This study comparatively evaluated the effects of the commonly used six extraction methods (acidic, alkaline, enzymatic, ultrasonic, high-pressure, and microwave) on the physico-chemical properties, processing characteristics, and biological activities of polysaccharides from Clitocybe squamulosa (CSFPs). The results show that polysaccharides extracted using an enzyme-assisted extraction method has a relatively high extraction yield (4.46 ± 1.62 %) and carbohydrate content (70.79 ± 6.25 %) compared with others. Furthermore, CSFPs were all composed of glucose, galactose, mannose, xylose, and glucosamine hydrochloride. Only ultrasonic-assisted extraction of polysaccharides (CSFP-U) has a triple helix chain conformation. Scanning electron microscopy (SEM) revealed significant differences in the microstructure of polysaccharides prepared using different methods. Besides that, the polysaccharides prepared by alkali extraction (CSFP-B) and high-pressure assisted extraction (CSFP-H) have good water (2.86 ± 0.29 g/g and 3.15 ± 0.29 g/g) and oil (8.13 ± 0.32 g/g and 7.97 ± 0.04 g/g) holding properties. The rheological behavior demonstrated that CSFPs solutions were typical non-Newtonian fluid. Apart from this, the antioxidant capacity (clearing DPPH (IC50 = 0.29) and ABTS free radicals (IC50 = 0.19), total reduction ability (IC50 = 3.02)) of polysaccharides prepared by the microwave-assisted extraction (CSFP-M) method was significantly higher than that of other extraction methods. By contrast, the polysaccharide prepared by acid extraction (CSFP-A) has the optimum binding capacity (bile acid salt (71.30 ± 6.78 %) and cholesterol (57.07 ± 3.26 mg/g)). The antibacterial activity of CSFPs was positively correlated with their concentration. Thus, the research results can provide a theoretical basis for the development and utilization of polysaccharides from C. squamulosa.

Improving the emulsifying capacity of brewers' spent grain arabinoxylan by carboxymethylation

Arabinoxylan derived from brewers' spent grain was carboxymethylated, and the emulsifying capacity of carboxymethylated arabinoxylans (CMAX) with different degrees of substitution (DS) was investigated. Results showed that carboxymethylation greatly enhanced the emulsifying capacity and emulsion stability of CMAX compared to the initial arabinoxylan. CMAX developed decreased ζ-potential, higher hydrophilicity, and improved interfacial adsorption capacity. Consequently, the denser and stronger interface on the oil droplet was formed, and the stabilizing mechanism was altered. Moreover, CMAX with lower DS could effectively stabilize emulsions during storage at a concentration of 0.5 % and pH between 6 and 7. Higher DS, however, led to poorer emulsion stability and greater flocculation as a result of the fragile interface formed by excess intermolecular ionic force. The research found CMAX potential in emulsion stabilizing and further applications in food processing.

A review of high internal phase Pickering emulsions: Stabilization, rheology, and 3D printing application

High internal phase Pickering emulsion (HIPPE) is renowned for its exceptionally high-volume fraction of internal phase, leading to flocculated yet deformed emulsion droplets and unique rheological behaviors such as shear-thinning property, viscoelasticity, and thixotropic recovery. Alongside the inherent features of regular emulsion systems, such as large interfacial area and well-mixture of two immiscible liquids, the HIPPEs have been emerging as building blocks to construct three-dimensional (3D) scaffolds with customized structures and programmable functions using an extrusion-based 3D printing technique, making 3D-printed HIPPE-based scaffolds attract widespread interest from various fields such as food science, biotechnology, environmental science, and energy transfer. Herein, the recent advances in preparing suitable HIPPEs as 3D printing inks for various applied fields are reviewed. This work begins with the stabilization mechanism of HIPPEs, followed by introducing the origin of their distinctive rheological behaviors and strategies to adjust the rheological behaviors to prepare more eligible HIPPEs as printing inks. Then, the compatibility between extrusion-based 3D printing and HIPPEs as building blocks was discussed, followed by a summary of the potential applications using 3D-printed HIPPE-based scaffolds. Finally, limitations and future perspectives on preparing HIPPE-based materials using extrusion-based 3D printing were presented.

Astonishing emulsifying properties of a novel exopolysaccharide produced from Bacillus velezensis BABA50

Microbial exopolysaccharides (EPSs) are currently under intensive research in various applications. However, studies on EPS from Bacillus velezensis are rare and the emulsifying properties of this EPS have not been studied previously. An EPS produced by a novel B. velezensis BABA50 strain isolated from an Algerian hot spring was characterised. The results of structural, morphological and thermal analyses showed a heteropolymeric structure containing galactose, glucose, glucuronic acid and N-acetyl glucosamine. Analyses revealed the presence of carbonyl and hydroxyl groups, branched and highly porous structure and relevant thermal stability compared to other EPSs with a high degradation temperature of 260 °C and 38% of residual mass at 800 °C. EPS from B. velezensis BABA50 presents distinct polymer in terms of structure and composition compared to previously described EPS with excellent emulsifying and antioxidant activities; this EPS holds great potential in the food and cosmetic industries as a thermostable emulsifier and antioxidant agent.

Noncovalent interactions between biomolecules facilitated their application in food emulsions' construction: A review

The use of biomolecules, such as proteins, polysaccharides, saponins, and phospholipids, instead of synthetic emulsifiers in food emulsion creation has generated significant interest among food scientists due to their advantages of being nontoxic, harmless, edible, and biocompatible. However, using a single biomolecule may not always meet practical needs for food emulsion applications. Therefore, biomolecules often require modification to achieve ideal interfacial properties. Among them, noncovalent interactions between biomolecules represent a promising physical modification method to modulate their interfacial properties without causing the health risks associated with forming new chemical bonds. Electrostatic interactions, hydrophobic interactions, and hydrogen bonding are examples of noncovalent interactions that facilitate biomolecules' effective applications in food emulsions. These interactions positively impact the physical stability, oxidative stability, digestibility, delivery characteristics, response sensitivity, and printability of biomolecule-based food emulsions. Nevertheless, using noncovalent interactions between biomolecules to facilitate their application in food emulsions still has limitations that need further improvement. This review introduced common biomolecule emulsifiers, the promotion effect of noncovalent interactions between biomolecules on the construction of emulsions with different biomolecules, their positive impact on the performance of emulsions, as well as their limitations and prospects in the construction of biomolecule-based emulsions. In conclusion, the future design and development of food emulsions will increasingly rely on noncovalent interactions between biomolecules. However, further improvements are necessary to fully exploit these interactions for constructing biomolecule-based emulsions.

Lentinula edodes Sing Polysaccharide: Extraction, Characterization, Bioactivities, and Emulsifying Applications

In the present work, the optimization of extraction, emulsifying properties, and biological activities of polysaccharides from Lentinula edodes Sing (LES) were studied. The results showed LES polysaccharides extracted by hot water or ultrasonication are a group of β-glucan. Among all the samples, the one extracted by hot water showed the best emulsifying capacity. In addition, the results demonstrated that LES polysaccharide had strong scavenging activities in vitro on DPPH and ABTS radicals, which reached the highest level for the one extracted by 90 min ultrasonication (p < 0.05). Overall, Lentinula edodes Sing polysaccharides (LESPs) may have potential applications as emulsifying agents in food industries.

Physicochemical characterization and antioxidant activity of polysaccharides from Chlorella sp. by microwave-assisted enzymatic extraction

Microwave-assisted enzymatic extraction (MAEE) was used for the separation of polysaccharides from micro-Chlorella. The extraction condition of MAEE was optimized by Box-Behnken design and response surface methodology. Results showed that the optimal condition for the extraction of Chlorella sp. crude polysaccharides (CSCP) was at 50°C for 2.3 h with 380 W of microwave power and 0.31% of enzyme dosage. Under the optimal extraction condition, the extraction yield of CSCP reached 0.72%. Similarly, the α-amylase modification conditions of the CSCP were also optimized, in which the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging rate was used as the response value. The scavenging rate of DPPH free radicals was 17.58% when enzyme dosage was 271 U/g at 51°C for 14 min. Moreover, the enzyme-modified CSCP presented a typical heteropolysaccharide mainly including glucose (48.84%), ribose (13.57%) and mannose (11.30%). MAEE used in this work achieved a high extraction yield of CSCP, which provides an efficient method for the extraction of CSCP from Chlorella sp.

Preparation and Antioxidant Activity of Acetylated Mung Bean Peel Polysaccharides

Mung bean peel polysaccharides are one of the main active components in mung bean peel. Acetylated mung bean peel polysaccharides were prepared by extracting and acetylating them, and characterized by infrared and ultraviolet methods to preliminarily understand the structural characteristics and activity of acetylated mung bean peel polysaccharides. Acetylation modification can improve the structure of polysaccharides, thereby causing changes in their properties. The product obtained after acetylation modification exhibited new characteristic absorption peaks at 1732 cm-1 , and the scavenging ability of hydroxyl radicals was improved. Therefore, acetylation modification of mung bean peel polysaccharides could enhance the activity by improving the structure, which provided an experimental basis for the application of mung bean peel polysaccharides.

Preparation and analysis of polysaccharide from Solanum tuberdsm

The crude Solanum tuberdsm polysaccharides (STP) were extracted with hot water. In the process of extraction, proteins, pigments, small molecules and salts in the mixture were removed by Sevage reagent, diatomite and distilled water dialysis, respectively. In addition, the process conditions of protein removal by response surface methodology (RSM) were optimized, and the optimum process conditions of Sevage method were established as follows: ultrasound power 350 W, ultrasound time 20 min, deproteinization twice, volume ratio of polysaccharide solution to Sevage reagent 1:1 (mL/mL). Under these conditions, the protein removal rate was 93.14%.

Structural characterization of a heteropolysaccharide from the fruit of Crataegus pinnatifida and its bioactivity on the gut microbiota of immunocompromised mice

Crataegus pinnatifida is a common food in China, Europe and North America. In order to confirm polysaccharide was the material basis for C. pinnatifida to exert immune regulation. A polysaccharide (CPP) with a molecular weight of 13.58 kDa was isolated from C. pinnatifida. The structure of CPP was determined to be a backbone composed of → 3,5)-α-l-Araf-(1→, with two branches consisting of → 4)-α-d-Galp-(1 → and → 5)-α-l-Araf-(1→, with α-l-Araf and α-d-Manp as the terminal unit. CPP (10 ∼ 500 μg/mL) could promote the secretion of nitric oxide, interleukin-2, interleukin-6 and tumor necrosis factor-α in vitro. CPP could significantly restore the body weight of immunosuppressive mice and improve the immune organ index and interleukin-2, interleukin-6, and tumor necrosis factor-α secretion. In addition, CPP increased the abundance of Bacteroidetes and Verrucomicrobia and decreased the abundance of Proteobacteria at the phylum level. So CPP can regulate the gut microbiota and play an important role in immune regulation.

Strategies for modulating the lipid digestion of emulsions in the gastrointestinal tract

The structural changes in emulsion products can be used to control the bioavailability of fatty acids and lipophilic compounds. After ingestion, lipid droplets undergo breakdown and structural changes as they pass through the gastrointestinal tract. The oil-water interface plays a critical role in modulating the digestive behavior of lipid droplets because changes in the interfacial layer control the adsorption of lipase and bile salts and determine the overall rate and extent of lipid digestion. Therefore, lipid digestibility can be tuned by selecting the appropriate types and levels of stabilizers. The stabilizer can change the lipase accessibility and exposure of lipid substrates, resulting in variable digestion rates. However, emulsified lipids are not only added to food matrixes but are also co-ingested from other dietary components. Therefore, overall consumption behaviors can affect the digestion rate and digestibility of emulsified lipids. Although designing an emulsion structure is challenging, controlling lipid digestion can improve the health benefits of products. Therefore, a thorough understanding of the process of emulsified lipid digestion is required to develop food products that enable specific physiological responses. The targeted or delayed release of lipophilic molecules and fatty acids through emulsion systems has significant applications in healthcare and pharmaceuticals.

Extraction, Physicochemical Properties, Functional Activities and Applications of Inulin Polysaccharide: a Review

Inulin is a naturally soluble dietary fiber that is widely distributed and primarily derived from plants. As a reserve biopolysaccharide in plants, inulin is considered an indigestible carbohydrate of fructan because of its unique β-(2,1)-glycosidic bond structure. Numerous recent animal and human experimental studies have shown that functional inulin possesses multiple bioactivities, including immunomodulatory, antioxidant, antitumor, hepatoprotective, hypoglycemic, and gastrointestinal protective activities. Due to its increasing popularity, people tend to consume foods containing inulin. Moreover, inulin holds promise as a bioactive compound for use in the development of various food products. Therefore, this paper provides a detailed review of the extraction method, physicochemical properties, functional activity, and application development of inulin polysaccharides, to provide a theoretical foundation for further advancements in the fields of preparation and application of functional foods.

Ultrasonic-assisted extraction, characteristics and activity of Ipomoea batatas polysaccharide

Ipomoea batatas polysaccharides (IBPs) have many important physiological functions. The optimal extraction conditions were extraction time of 40 min, solid-liquid ratio of 1:8 and ultrasonic power of 240 W. 1D/2D nuclear magnetic resonance (1D/2D NMR) analysis showed that the main chain of IBP-1A was mainly composed of →4)-α-D-Glcp-(1→ and →3, 6)-β-D-Glcp-(1→ residues. In vivo experiments showed that polysaccharide significantly increased the levels of antioxidation-related enzymes and metabolites in older mice. It could significantly relieve oxidative stress injury and delay aging. Therefore, this study provided a new theoretical basis for the development of IBPs as antioxidant food.

Ultrasound-assisted extraction and analysis of maidenhairtree polysaccharides

The maidenhairtree polysaccharides (MTPs) have important application prospects. So, the extraction, purification, structure, derivatization and biological activities of polysaccharides from leaves, fruits, and testae of maidenhairtree were disscussed. Polysaccharides were extracted by collaborative extraction methods such as ultrasound-assisted extraction and microwave-assisted extraction. The ultrasound-assisted extraction had higher content and higher efficiency. The structural characteristics and structure-activity relationship of maidenhairtree polysaccharides were studied in order to provide theoretical basis and technical support for the further development and utilization of maidenhairtree polysaccharides.

Ultrasound-assisted extraction and characteristics of maize polysaccharides from different sites

Antitumor, antioxidant, hypoglycemic, and immunomodulatory properties are all exhibited by maize polysaccharides. With the increasing sophistication of maize polysaccharide extraction methods, enzymatic method is no longer limited to a single enzyme to extract polysaccharides, and is more often used in combination with ultrasound or microwave, or combination with different enzymes. Ultrasound has a good cell wall-breaking effect, making it easier to dislodge lignin and hemicellulose from the cellulose surface of the maize husk. The "water extraction and alcohol precipitation" method is the simplest but most resource- and time-consuming process. However, the "ultrasound-assisted extraction" and "microwave-assisted extraction" methods not only compensate for the shortcoming, but also increase the extraction rate. Herein, the preparation, structural analysis, and activities of maize polysaccharides were analyzed and discussed.

Preparation and Analysis of Pueraria lobata Polysaccharides

Pueraria lobata polysaccharides (PLPs) were obtained by a hot water extraction method. Starting from the single factor experiment, the extraction was optimized by response surface methodology, and the following optimal extraction parameters were obtained: the extraction temperature was 84 °C, the liquid-solid ratio was 11 mL/g, the extraction time was 73 min, and the extraction rate of polysaccharides was 8.59%. The Sevag method was used to remove the protein soluble in water and H₂O₂ was used to remove the pigment; then PLPs were precipitated with three times of anhydrous ethanol, soluble salts and other small molecules were removed by dialysis, and finally refined PLPs were obtained by freeze-drying.

W/O/W emulsions stabilized with whey protein concentrate and pectin: Effects on storage, pasteurization, and gastrointestinal viability of Lacticaseibacillus rhamnosus

Probiotics have demonstrated various bioactive functions but poor storage and application stability, and encapsulation a promising method of increasing its viability. In this study, whey protein concentrate (WPC) and pectin (PEC) formed non-covalent complexes through electrostatic interaction at pH 3.0. The formed WPC-PEC complexes showed superior particle size, absolute potential, emulsification properties, and structural changes when PEC concentration was >0.8 % (w/v). This made them appropriate as a hydrophilic emulsifier to stabilize W/O/W emulsions. Then, Lacticaseibacillus rhamnosus, one representative of probiotics, was encapsulated in the internal aqueous phase of W/O/W emulsions. We obtained higher encapsulation efficiency (78.49 %) and smaller D_4,3 (9.72 μm) with 0.8 % (w/v) PEC concentration. Encapsulation of Lacticaseibacillus rhamnosus in W/O/W emulsions improved its viability under harsh conditions, including 28 days storage at 4 °C, simulated pasteurization, and simulated gastrointestinal digestion. W/O/W emulsions stabilized by WPC-PEC non-covalent complexes further improved the survival of Lacticaseibacillus rhamnosus against various adverse conditions as compared to WPC. These findings suggest that the studied W/O/W emulsions systems have the potential to deliver probiotics in food substrates to enhance their viability during production processing, storage transportation, and digestion.

Xylans extracted from branches and leaves of Protium puncticulatum: antioxidant, cytotoxic, immunomodulatory, anticoagulant, antitumor, prebiotic activities and their structural characterization

This work aimed to isolate and characterize xylans from branches and leaves of Protium puncticulatum, in addition to evaluating its in vitro biological and prebiotic potential. The results showed that the chemical structure of the obtained polysaccharides is similar being classified as homoxylans. The xylans presented an amorphous structure, in addition to being thermally stable and presenting a molecular weight close to 36 g/mol. With regard to biological activities, it was observed that xylans were able to promote low antioxidant activity (< 50%) in the different assays evaluated. The xylans also showed no toxicity against normal cells, in addition to being able to stimulate cells of the immune system and showing promise as anticoagulant agents. In addition to presenting promising antitumor activity in vitro. In assays of emulsifying activity, xylans were able to emulsify lipids in percentages below 50%. Regarding in vitro prebiotic activity, xylans were able to stimulate and promote the growth of different probiotics. Therefore, this study, in addition to being a pioneer, contributes to the application of these polysaccharides in the biomedical and food areas.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03506-1.

Matrine-producing endophytic fungus Galactomyces candidum TRP-7: screening, identification, and fermentation conditions optimization for Matrine production

Matrine (MA) is an alkaloid extracted from the root of genus Sophora with various pharmacological activities. Production of MA by endophytic fungi offers an alternative challenge to reduce the massive consumption to meet the increasing demand of MA. In the current study, the positive strains with MA producing ability were screened from endophytic fungal isolated from the root of Sophora tonkinensis Gagnep. Chromatographic analyses verified the identity of the produced MA. Among these fungi, Galactomyces candidum strain TRP-7 was the most valuable strain for MA production with the initial yield 8.26 mg L^-1. The MA production was efficiently maximized up to 17.57 mg L^-1 of fermentation broth, after optimization of eight process parameters using Plackett-Burman and Box-Behnken designs. The statistical optimization resulted in a 1.127 times increase in MA production as compared to the initial yield of TRP-7. This is the first report to isolate endophytic fungi with MA-producing activity from S. tonkinensis Gagnep., and to identify an endophytic fungus G. candidum TRP-7 as a new promising start strain for a higher MA yield.

Ultrasound-assisted extraction and properties of polysaccharide from Ginkgo biloba leaves

Response surface methodology (RSM) was used to optimize the ultrasound-assisted extraction conditions of Ginkgo biloba leaves polysaccharide (GBLP). The optimum extraction conditions for the ultrasound-assisted extraction of GBLP were obtained as liquid to material ratio of 30 mL/g, ultrasonic power of 340 W, and extraction time of 50 min. Under these conditions, the yield of GBLP was 5.37 %. Two chemically modified polysaccharides, CM-GBLP and Ac-GBLP, were obtained by carboxymethylation and acetylation of GBLP. The physicochemical properties of these three polysaccharides were comparatively studied and their in vitro antioxidant activities were evaluated comprehensively. The results showed that the solubility of the chemically modified polysaccharides was significantly enhanced and the in vitro antioxidant activity was somewhat improved. This suggests that carboxymethylation and acetylation are effective methods to enhance polysaccharide properties, but the results exhibited some uncontrollability. At the same time, GBLP has also shown high potential for research and application.

Naturally and chemically acetylated polysaccharides: Structural characteristics, synthesis, activities, and applications in the delivery system: A review

Acetylated polysaccharides refer to polysaccharides containing acetyl groups on sugar units. In the past, the acetylation modification of wall polysaccharides has been a hot research topic for scientists. However, in recent years, many studies have reported that acetylation-modified plant, animal, and microbial polysaccharide show great potential in delivery systems. From the latest perspective, this review systematically presents the different sources of naturally acetylated polysaccharides, the regularity of their modification, the chemical preparation of acetylation modifications, the biological activities and functions of acetylated polysaccharides, and the application in the delivery system. In nature, acetylated polysaccharides are extensively distributed in plants, microorganism, and animals. The level of acetylation modification, the distribution of chains, and the locations of acetylation modification sites differ between species. An increasing number of acetylated polysaccharides were prepared in the aqueous medium, which is safe, environment friendly, and low-cost. In addition to being necessary for plant growth and development, acetylated polysaccharides have immunomodulatory, antioxidant, and anticancer properties. The above-mentioned multiple sources, multifunctional and multi-active acetylated polysaccharides, make them an increasingly important part of delivery systems. We conclude by discussing the future directions for research and development and the potential uses for acetylated polysaccharides.