Effects of different hydrocolloids on the water migration, rheological and 3D printing characteristics of β-carotene loaded yam starch-based hydrogel

Indirect prediction of the 3D printability of polysaccharide gels using multiple machine learning (ML) models

In this paper, the capabilities of NIR spectroscopy and LF-NMR data were compared for rapidly predicting the rheological properties of polysaccharide gels and assessing their printability. Seven machine learning (ML) models were established for rheological property prediction based on partial least squares regression (PLSR), support vector regression (SVR), back propagation artificial neural network (BPANN), one-dimensional convolutional neural network (1D CNN), recurrent neural network (RNN), long short-term memory (LSTM), and Transformer. The results showed that among the seven models, the SVR, BPANN, and 1D CNN models based on NIR spectroscopy effectively predicted the rheological parameters of polysaccharide gels, with the highest R2 in the prediction set reaching 0.9796 and the highest RPD reaching 7.0708. For most polysaccharide gels, using the LF-NMR relaxation time distribution curves provided better predictions of rheological properties than using transverse relaxation time and peak area. Among the seven models, the PLSR, SVR, 1D CNN, and Transformer models effectively predicted the rheological characteristics based on LF-NMR parameters, with the highest R2 in the prediction set reaching 0.9869 and the highest RPD reaching 8.7220. This study successfully established a prediction system for the rheological behaviors and 3D printing performance of polysaccharide gels using NIR spectroscopy and LF-NMR data combined with ML methods, achieving an intelligent assessment of the 3D printing behavior of polysaccharide gels.

Citrus peel powder alters the rheological properties and 3D printing performance of potato starch gel

Owing to the growing interest in sustainable resource utilization, the current study explores the potential replacement of pectin with citrus peel powder (CP) in starch-based 3D food printing ink formulations. The effect of different concentrations of pectin (1 %, 2 %, 3 %) and CP (1 %, 2 %, 3 %) on the printing fidelity, microstructure, rheological and textural properties of potato starch gel were investigated. The results showed that the 3D printing performance of CP-added inks was higher than that of pectin-added inks at all tested concentrations. The storage modulus of CP-added ink was higher than that of pectin-added ink proving higher printing fidelity of CP-added inks. Additionally, hardness, gumminess, springiness and chewiness of food ink increased with an increase in the concentration of CP while decreased with an increase in concentration of pectin. Interestingly, pectin and CP-added inks displayed similar in vitro digestibility, suggesting an insignificant effect of replacing pectin with CP on in vitro glucose release. Moreover, the antioxidant activity of CP-added ink was higher than pectin-added ink demonstrating the potential applications of CP-added ink in functional ink development. Therefore, this study claims for effective replacement of pectin with CP in starch-based 3D food printing ink formulations as a promising sustainable additive.

Interactions between rice starch and flavor components and their impact on flavor

Flavor is considered one of the most significant factors affecting food quality. However, it is often susceptible to environmental factors, so encapsulation is highly necessary to facilitate proper handling and processing. In this study, the structural changes in starch encapsulation and their effects on flavor retention were investigated using indica starch (RS) as a matrix to encapsulate three flavoring compounds, namely nonanoic acid, 1-octanol, and 2-pentylfuran. The rheological and textural results suggested that the inclusion of flavor compounds improved the intermolecular interactions between starch molecules, resulting in a significant increase in the physicochemical properties of starch gels in the order: nonanoic acid > 1-octanol > 2-pentylfuran. The XRD results confirmed the successful preparation of v-starch. Additionally, the inclusion complexes (ICs) were characterized using FT-IR, SEM, and DSC techniques. The results showed that v-starch formed complexes with Flavor molecules. The higher enthalpy of the complexes suggested that the addition of alcohols and acids could improve the intermolecular complexation between starch molecules. The retention rates of three flavor compounds in starch were determined using HS-GC, with the values of 51.7 %, 32.37 %, and 35.62 %. Overall, this study provides insights into novel approaches to enhance the quality and flavor retention, improve the storability and stability, reduce losses during processing and storage, and extend the shelf life of starchy products.

Personalized nutrition with 3D-printed foods: A systematic review on the impact of different additives

Three-dimensional (3D) printing is one of the world's top novel technologies in the food industry due to the production of food in different conditions and places (restaurants, homes, catering, schools, for dysphagia patients, and astronauts' food) and the production of personalized food. Nowadays, 3D printers are used in the main food industries, including meat, dairy, cereals, fruits, and vegetables, and have been able to produce successfully on a small scale. However, due to the expansion of this technology, it has challenges such as high-scale production, selection of printable food, formulation optimization, and food production according to the consumer's opinion. Food additives (gums, enzymes, proteins, starches, polyphenols, spices, probiotics, algae, edible insects, oils, salts, vitamins, flavors, and by-products) are one of the main components of the formulation that can be effective in food production according to the consumer's attitude. Food additives can have the highest impact on textural and sensory characteristics, which can be effective in improving consumer attitudes and reducing food neophobia. Most of the 3D-printed food cannot be printed without the presence of hydrocolloids, because the proper flow of the selected formulation is one of the key factors in improving the quality of the printed product. Functional additives such as probiotics can be useful for specific purposes and functional food production. Food personalization for specific diseases with 3D printing technology requires a change in the formulation, which is closely related to the selection of correct food additives. For example, the production of 3D-printed plant-based steaks is not possible without the presence of additives, or the production of food for dysphagia patients is possible in many cases by adding hydrocolloids. In general, additives can improve the textural, rheological, nutritional, and sensory characteristics of 3D printed foods; so, investigating the mechanism of the additives on all the characteristics of the printed product can provide a wide perspective for industrial production and future studies.

3D Printing of Polysaccharide-Based Hydrogel Scaffolds for Tissue Engineering Applications: A Review

In tissue engineering, 3D printing represents a versatile technology employing inks to construct three-dimensional living structures, mimicking natural biological systems. This technology efficiently translates digital blueprints into highly reproducible 3D objects. Recent advances have expanded 3D printing applications, allowing for the fabrication of diverse anatomical components, including engineered functional tissues and organs. The development of printable inks, which incorporate macromolecules, enzymes, cells, and growth factors, is advancing with the aim of restoring damaged tissues and organs. Polysaccharides, recognized for their intrinsic resemblance to components of the extracellular matrix have garnered significant attention in the field of tissue engineering. This review explores diverse 3D printing techniques, outlining distinctive features that should characterize scaffolds used as ideal matrices in tissue engineering. A detailed investigation into the properties and roles of polysaccharides in tissue engineering is highlighted. The review also culminates in a profound exploration of 3D polysaccharide-based hydrogel applications, focusing on recent breakthroughs in regenerating different tissues such as skin, bone, cartilage, heart, nerve, vasculature, and skeletal muscle. It further addresses challenges and prospective directions in 3D printing hydrogels based on polysaccharides, paving the way for innovative research to fabricate functional tissues, enhancing patient care, and improving quality of life.

Development of interpenetrating network hydrogels: Enhancing the release and bioaccessibility of green tea polyphenols

Green Tea polyphenols (GTP) are important bioactive compounds with excellent physiological regulation functions. However, they are easily destroyed by the gastric environment during digestion. In this work, a sodium alginate (SA)-gellan gum (GG) interpenetrating network (IPN) hydrogel was synthesized to protect and delivery GTP. The ratio of SA/GG significantly affects the network structure of IPN hydrogels and the performance of delivering GTP. The hydrogel formed by interpenetrating 20 % GG with 80 % SA as the main network had the highest water uptake (55 g/g), holding capacity (950 mg/g), and freeze-thaw stability, with springiness reaching 0.933 and hardness reaching 1300 g, which due to the filling effect and non-covalent interaction. Rheological tests showed that the crosslink density of IPN hydrogel in SA-dominated network was improved by the addition of GG to make it better bound to GTP, and the higher water uptake meant that the system could absorb more GTP-containing solution. This IPN hydrogel maintained 917.3 mg/g encapsulation efficiency at the highest loading capacity (1080 mg/g) in tests as delivery system. In in vitro digestion simulations, owing to the pH responsiveness, the IPN hydrogel reduced the loss of GTP in gastric fluid, achieving a bioaccessibility of 71.6 % in the intestinal tract.

Recent advances on enhancing 3D printing quality of protein-based inks: A review

3D printing is an additive manufacturing technology that locates constructed models with computer-controlled printing equipment. To achieve high-quality printing, the requirements on rheological properties of raw materials are extremely restrictive. Given the special structure and high modifiability under external physicochemical factors, the rheological properties of proteins can be easily adjusted to suitable properties for 3D printing. Although protein has great potential as a printing material, there are many challenges in the actual printing process. This review summarizes the technical considerations for protein-based ink 3D printing. The physicochemical factors used to enhance the printing adaptability of protein inks are discussed. The post-processing methods for improving the quality of 3D structures are described, and the application and problems of fourth dimension (4D) printing are illustrated. The prospects of 3D printing in protein manufacturing are presented to support its application in food and cultured meat. The native structure and physicochemical factors of proteins are closely related to their rheological properties, which directly link with their adaptability for 3D printing. Printing parameters include extrusion pressure, printing speed, printing temperature, nozzle diameter, filling mode, and density, which significantly affect the precision and stability of the 3D structure. Post-processing can improve the stability and quality of 3D structures. 4D design can enrich the sensory quality of the structure. 3D-printed protein products can meet consumer needs for nutritional or cultured meat alternatives.

Investigation of the structure, rheology and 3D printing characteristics of corn starch regulated by glycyrrhizic acid

This study aimed to construct a novel corn starch-glycyrrhizic acid (CS-GA) ink and systematically investigate the effects of GA on the water distribution, microstructure, rheology and 3D printing properties of CS hydrogels. The results showed that the CS chains could form strong hydrogen bonds with GA molecules, inhibit the formation of short-range ordered structure of CS and reduce the content of B-type starch. The low-field nuclear magnetic results showed that the introduction of GA could increase bound water content in CS-GA hydrogels. With the increase of GA content, the CS-GA hydrogel changed from CS-dominated to a GA-dominated gel network system. Rheological results showed that all samples exhibited typical shear thinning behavior. High GA concentration was beneficial to increasing the self-supporting properties and thixotropic recovery of CS-GA hydrogels. Compared with the pure CS hydrogel, the 3D printing characteristics of CS-GA hydrogels were significantly enhanced due to the increased bound water content and the enhancement of rheological properties. At 40 % GA content, CS-GA hydrogel showed the highest printing accuracy of 96.4 % ± 0.30 %. The printed product could perfectly replicate the preset model. Therefore, this study provided a theoretical basis for regulating starch's rheology and 3D printing characteristics and developing novel food-grade 3D printing inks.

Development of 3D printed k-carrageenan-based gummy candies modified by fenugreek gum: Correlating 3D printing performance with sol-gel transition

Temperature-responsive inks were formulated using k-carrageenan, fenugreek gum (FG), rose extracts, and sugar, of which the first two were used as the gelling agents. The interactions among components in these mixed ink formulations were investigated. Sol-gel transition and rheological properties of these inks were also correlated with extrusion, shape formation, and self (shape)-supporting aspects of 3D printing. Results indicated that incorporating FG increased inks' gelation temperature from 39.7 °C to 44.7-49.6 °C, affecting the selection of printing temperature (e.g., 0 % FG: 40 °C, 0.15 % FG: 45 °C, 0.3 % FG-0.6 % FG: 50 °C). Inks in solution states with lower viscosity (<5 Pa·s) were amenable to ensure their smooth extrusion through the tip of the printing nozzle. A shorter sol-gel transition time (approximately 100 s) during the shape formation stage facilitated the solidification of inks after extrusion. The addition of FG significantly (p<0.05) improved the mechanical properties (elastic modulus, hardness, etc.) of the printed models, which facilitated their self-supporting behavior. Low field nuclear magnetic resonance indicated that the inclusion of FG progressively restricted water mobility, consequently reducing the water syneresis rate of the mixed inks by 0.86 %-3.6 %. FG enhanced hydrogen bonding interactions among the components of these mixed inks, and helped to form a denser network.

Modulation of starch structure, swallowability and digestibility of 3D-printed diabetic-friendly food for the elderly by dry heating

Elderly people often experience difficulty in swallowing and have impaired regulation of the nervous system. Furthermore, their blood glucose level can rise easily after eating. Therefore, functional foods that are easy to swallow and can maintain blood glucose at a lower level have been an important research topic in recent years. In this study, 3D printing was combined with dry heating to modify the starch in white quinoa and brown rice to develop whole grain foods with Osmanthus flavor that meet the dietary habits of the elderly. The samples were tested for printability, swallowing performance, and in vitro digestion. The results showed that after dry heating, all samples had shear-thinning properties and could pass through the extrusion nozzle of the printer smoothly. Both white quinoa and brown rice showed improved printability and self-support compared to the control. B45 (white quinoa, dry heating for 45 min) and C45 (brown rice, dry heating for 45 min) had significant elasticity and greater internal interaction strength during swallowing to resist disintegration of food particles during chewing. B45, C30, and C45, conformed to class 4 consistency and were characterized by easy swallowing of the diet. Further, dry heating resulted in greater resistance to enzymatic degradation of white quinoa and brown rice starch, with overall in vitro digestibility lower than the control.

Undaria pinnatifida gel inks for food 3D printing are developed based on the colloidal properties of Undaria pinnatifida slurry and protein/colloidal/starch substances

Currently, people eat Undaria pinnatifida (UP) in a single way, and processing homogeneity is serious. However, UP has not gained any traction in the 3D printing industry to date. This study explored the incorporation of soy protein isolate (SPI), pea protein (PP), xanthan gum (XG), guar gum (GG), corn starch (CS), and potato starch (PS) into UP slurry liquid, the primary component of the study, to formulate a UP gel ink. The UP gel 3D printing ink system based on UP paste was established and characterized. The results show that hydrogen bonds are formed, and three-dimensional gel network structure is formed in all UP gel inks. UP gel inks containing high concentrations of SPI and GG exhibited good texture and rheological qualities and good 3D printing effect, with storage modulus (G') values of 8440.405 ± 3.893 and 8111.730 ± 3.585 Pa. The loss of modulus (G″) values were 1409.107 ± 3.524 and 1071.673 ± 3.669 Pa. Unfortunately, the properties of other UP gel inks are not suitable, resulting in poor 3D printing results. The food 3D printing method developed in this study provides valuable insights for expanding food 3D printing material choices and achieving high-value applications of UP.

Effects of wheat protein on hot-extrusion 3D-printing performance and the release behaviours of caffeic acid-loaded wheat starch

In this study, the effects of wheat protein (WP) on the hot-extrusion 3D-printing (HE-3DP) performance of wheat starch (WS) gels, as well as effects of such gels on the encapsulation of caffeic acid, were investigated for the first time. The HE-3DP results show that the addition of WP can reduce print-line width and improve printing accuracy and fidelity, and the best printing results were achieved when using gels with 10 % WP. The rheological results show that WP reduced the gels' linear viscoelastic region (LVR), yield stress (τy), flow stress (τf) and consistency factor (K) but increased their structural recovery rate, which facilitated smooth extrusion during 3D printing and, thus, improved printing accuracy. The analysis of X-ray diffraction and small-angle X-ray scattering indicates that adding WP to WS could increase the mass fractal dimension and lead to denser gel network structures. The results regarding release kinetics demonstrate that the maximum release of caffeic acid from gels decreased by 28 % with the addition of WP, indicating slow-release behaviour. This study provided valuable information about processing wheat products via 3D printing.

Investigation of 3D printing product of powder-based white mushroom incorporated with soybean protein isolate as dysphagia diet

The elderly people are prone to dysphagia due to weakened muscle strength. 3D food printing could modify the nutritional ratio and shape design to produce personalized nutritious food suitable for patients with dysphagia. White mushroom (Agaricus bisporus) is rich in a variety of active ingredients such as polysaccharides and polyphenols which are beneficial to human body, but its unique texture is not suitable for patients with dysphagia to chew. This study investigated the impact of different concentrations of soybean protein isolate (SPI, 3%, 5%, 7%, w/w) on 3D food printing of white mushroom powder and carried out the hierarchical representation of dysphagia diet within the framework of International Dysphagia Diet Standardization Initiative (IDDSI). The results illustrated that SPI addition to white mushroom gel reduced water mobility and promoted hydrogen bond formation, which significantly improved the mechanical strength and cohesiveness of printing inks, including yield stress, viscosity and hardness. IDDSI tests showed that the SPI addition of 3% and 5% helped the printing ink pass the spoon tilt test and the fork drip test, which could be classified as level 5 minced and moist food under the consideration of the fork pressure test. The 3D printing results indicated that the 7% SPI addition made the yield stress too high and was not easy for extrusion, resulting in the appearance defects of the printed sample. The addition of 3% SPI could make the printed sample have smooth surface and excellent self-supporting capacity. This work provides insights of white mushroom 3D printing technology as a more visually appealing dysphagia diet.

Investigation of 3D printing of toddler foods with special shape and function based on fenugreek gum and flaxseed protein

The practicability of using corn and flaxseed protein as printing inks for manufacture of printed products specifically designed for toddlers as a dysphagia diet with high precision and special shapes with addition of fenugreek gum (FGG) was investigated. 3D printing was used to process grains and dysphagia-compatible food (corn) into a dietary product with attractive appearance which was also easy to swallow. Rheological measurements shown that appropriate amount of flaxseed protein (FP, 0-10 %) can reduce the stickiness and yield strength of printing material. Based on FTIR measurements, FP weakened the hydrogen bond strength of inks, but it was still an important gradient for the formation of the ink suitable for precision 3D printing. The TPA results shown that the addition of FP (0-10 %) remarkably reduced both the stickiness and hardness of the ink. These results shown that compared with the control group, materials with FGG additions possessed higher printing accuracy and self-supporting ability. Ink with 5 % FP content exhibited the best printability and swallowability, while ink with 10 % FP content had the lowest viscosity and hardness, but it was not suitable for 3D printing. 3D printing of objects printed using Ink-C (5%FP and 0.8 %FGG) showed high support characteristic and attractive appearance. According to the international IDDSI testing standards, Ink-C (5%FP and 0.8 %FGG), Ink-E (15%FP and 0.8 %FGG), and Ink-F (20%FP and 0.8 %FGG) were defined as level 5-minced and moist foods.

A Study on the Structural and Digestive Properties of Rice Starch-Hydrocolloid Complexes Treated with Heat-Moisture Treatment

Rice starch-hydrophilic colloid complexes (SHCs) were prepared by incorporating xanthan gum and locust bean gum into natural rice starch. Subsequently, they underwent hygrothermal treatment (H-SHC) to investigate their structural and digestive properties with varying colloid types and added amounts of H-SHC. The results demonstrated that heat-moisture treatment (HMT) led to an increase in resistant starch (RS) content in rice starch. This effect was more pronounced after the addition of hydrophilic colloid, causing RS content to surge from 8.42 ± 0.39% to 38.36 ± 3.69%. Notably, the addition of locust bean gum had a more significant impact on enhancing RS content, and the RS content increased with the addition of hydrophilic colloids. Enzyme digestion curves indicated that H-SHC displayed a lower equilibrium concentration (C∞), hydrolysis index (HI), and gluconeogenesis index (eGI). Simultaneously, HMT reduced the solubility and swelling power of starch. However, the addition of hydrophilic colloid led to an increase in the solubility and swelling power of the samples. Scanning electron microscopy revealed that hydrophilic colloid encapsulated the starch granules, affording them protection. X-ray diffraction (XRD) showed that HMT resulted in the decreased crystallinity of the starch granules, a trend mitigated by the addition of hydrophilic colloid. Infrared (IR) results demonstrated no formation of new covalent bonds but indicated increased short-range ordering in H-SHC. Rapid viscosity analysis and differential scanning calorimetry indicated that HMT substantially decreased peak viscosity and starch breakdown, while it significantly delayed the onset, peak, and conclusion temperatures. This effect was further amplified by the addition of colloids. Rheological results indicated that H-SHC displayed lower values for G', G″, and static rheological parameters compared to natural starch. In summary, this study offers valuable insights into the development of healthy, low-GI functional foods.

Recent trends of 3D printing based on starch-hydrocolloid in food, biomedicine and environment

People are exploring the potential application of 3D printing in food, biomedicine and environment, but it is urgent to find suitable bio-ink. Bio-ink compounded with starch and hydrocolloid can not only improve the rheology, structure and printability of starch-based edible bio-ink, but also endow it with other functional characteristics, so that it can be applied to food, biomedicine and even the environment, and meet the strategic needs of national health, green and sustainable development. In this paper, hydrocolloids are reviewed as potential means to regulate the physicochemical properties of starch, which endows it with good printability and presents excellent printing products. The specific applications of the bio-ink in the fields of food, biomedicine and environment in hypoglycemic, lipid-lowering, swallowable food, delivery, intelligent materials, and bio-sensor are also discussed. Then, the challenges and future development trends of realizing large-scale application are prospected. Proper physicochemical properties of starch-hydrocolloid are positively correlated with printability. The presentation of excellent printability has realized the application in different fields, not only satisfies most people, but also create benefits for some specific people. This review is expected to provide some theoretical guidance for the further development of 3D printing technology and its large-scale application.

Microstructural, physicochemical properties and starch digestibility of brown rice flour treated with extrusion and heat moisture

Effects of heat moisture treatment (HMT), extrusion treatment (ET), and the combination treatment (HMT-ET) on microstructural, physicochemical properties, and starch digestibility of brown rice flour (BRF) were investigated. With a rise in resistant starch (RS), melting temperature, and a decrease in swelling capacity (SC), peak viscosity, and apparent amylose content (AAC), the HMT-ET BRF showed a significant lower expected glycemic index (eGI) than HMT and ET. XRD and FTIR results showed ET, HMT-ET caused the transition of starch crystals from amorphous to crystalline region, suggesting the formation of the starch-lipid complex. The analysis of DSC and RVA proved HMT-ET flours induced starch gelatinization and inhibited the starch retrogradation of BRF compared with the other three flours. Correlation analysis suggested that the combined effect of HMT and ET was response for the changes in physicochemical properties and reduction of in vitro starch digestibility. Overall, the BRF after HMT-ET with improved physicochemical properties and starch digestibility could be better utilized as a good substitute for carbohydrate sources.

Impact of Apricot Pulp Concentration on Cylindrical Gel 3D Printing

The process of 3D food printing is a rapidly growing field that involves the use of specialized 3D printers to produce food items with complex shapes and textures. This technology allows the creation of customized, nutritionally balanced meals on demand. The objective of this study was to evaluate the effect of apricot pulp content on printability. Additionally, the degradation of bioactive compounds of gels before and after printing was evaluated to analyze the effect of the process. For this proposal, physicochemical properties, extrudability, rheology, image analysis, Texture Profile Analysis (TPA), and bioactive compounds content were evaluated. The rheological parameters lead to higher mechanical strength and, thus, a decrease in elastic behavior before and after 3D printing as the pulp content increases. An increase in strength was observed when the pulp content increased; thus, sample gels with 70% apricot pulp were more rigid and presented better buildability (were more stable in their dimensions). On the other hand, a significant (p < 0.05) degradation of total carotenoid content after printing was observed in all samples. From the results obtained, it can be said that the gel with 70% apricot pulp food ink was the best sample in terms of printability and stability.

Recent advances in exploiting carrageenans as a versatile functional material for promising biomedical applications

Carrageenans are a group of biopolymers widely found in red seaweeds. Commercial carrageenans have been traditionally used as emulsifiers, stabilizers, and thickening and gelling agents in food products. Carrageenans are regarded as bioactive polysaccharides with disease-modifying and microbiota-modulating activities. Novel biomedical applications of carrageenans as biocompatible functional materials for fabricating hydrogels and nanostructures, including carbon dots, nanoparticles, and nanofibers, have been increasingly exploited. In this review, we describe the unique structural characteristics of carrageenans and their functional relevance. We summarize salient physicochemical features, including thixotropic and shear-thinning properties, of carrageenans. Recent results from clinical trials in which carrageenans were applied as both antiviral and antitumor agents and functional materials are discussed. We also highlight the most recent advances in the development of carrageenan-based targeted drug delivery systems with various pharmaceutical formulations. Promising applications of carrageenans as a bioink material for 3D printing in tissue engineering and regenerative medicine are systematically evaluated. We envisage some key hurdles and challenges in the commercialization of carrageenans as a versatile material for clinical practice. This comprehensive review of the intimate relationships among the structural features, unique rheological properties, and biofunctionality of carrageenans will provide novel insights into their biomedicine application potential.

In Vitro Digestion and Storage Stability of β-Carotene-Loaded Nanoemulsion Stabilized by Soy Protein Isolate (SPI)-Citrus Pectin (CP) Complex/Conjugate Prepared with Ultrasound

In this study, we employed the ultrasound-prepared electrostatic complex and covalent conjugate of soy protein isolate (SPI) and citrus pectin (CP) to prepare β-carotene-loaded nanoemulsions. The in vitro digestion and storage stability of nanoemulsions stabilized by different types of emulsifiers were investigated and compared. Nanoemulsions stabilized by ultrasound-treated complex/conjugate showed the highest encapsulation efficiency; during gastric digestion, these nanoemulsions also demonstrated the smallest droplet sizes and the highest absolute values of zeta potential, indicating that both electrostatic complexation/covalent conjugation and ultrasound treatment could significantly improve the stability of the resulting nanoemulsions. In comparison, complexes were more beneficial for the controlled release of β-carotene; however, the conjugate-stabilized nanoemulsion showed an overall higher bioaccessibility. The results were also confirmed by optical micrographs. Furthermore, nanoemulsions stabilized by ultrasound-prepared complexes/conjugates exhibited the highest stability during 14-day storage at 25 °C. The results suggested that ultrasound-prepared SPI–CP complexes and conjugates had great application potential for the delivery of hydrophobic nutrients.