Comparative elemental analysis of dairy milk and plant-based milk alternatives

Effect of lactation on the distribution of mineral elements in goat milk

The distribution of mineral elements in milk is crucial for their absorption and utilization, however, there has been limited attention given to the status of mineral elements in goat milk. In this study, goat milk was collected at 4 lactation periods (1-3, 90, 150, 240 d) and separated into 4 fractions (fat, casein, whey, and aqueous phase). The concentrations of Mg, Ca, Na, K, Zn, Fe, Cu, Mn, Co, Ni, Mo, and Cr in 4 fractions were analyzed using an inductively coupled plasma emission spectrometer. Our findings reveal that Ca, Zn, Fe, Cu, Mn, and Cr exhibit the highest levels in casein, while Mo demonstrates the highest content in whey. Additionally, Mg, Na, K, and Ni display the highest concentrations in the aqueous phase. Specifically, the contents of Ca, Cu and Fe in casein decrease from 1-3 to 150 d of lactation but increase from 150 to 240 d of lactation. Furthermore, the content of Mg in the aqueous phase decreases from 1-3 to 90 d of lactation but increases from 90 to 240 d of lactation. The content of Na and K in the aqueous phase decreases from 1-3 to 150 d of lactation. Notably, the content of Mo in whey increases from 1-3 to 150 d of lactation and decreases from 150 to 240 d. Our research contributes to the advancement of understanding the bioavailability of mineral elements in goat milk.

Evaluation of rheological, textural, and sensory characteristics of optimized vegan rice puddings prepared by various plant-based milks

Nowadays, plant-based milks are being considered as an alternative to dairy milk due to their advantages, such as sustainability, reduced allergenicity, health benefits, and lactose-free nature. Plant-based milks are widely used in the preparation of desserts, cheese-like products, and beverages, among other applications. The aim of the present study was to formulate vegan rice puddings using various commercially available plant-based milks as a sustainable alternative to dairy milk. For this aim, central composition design was applied to optimize the key processing parameters of the Thermomix®, including temperature (80-90°C), time (6-14 min), and the amount of rice flour (6-10%, w/v), using response surface methodology (RSM). According to the RSM results, the optimum conditions were found to be 90°C for 12.5 min with 6.5% rice flour, as they exhibited minimal phase separation and similar rheological and textural properties to dairy rice pudding. Soya milk pudding had the highest hardness value among the other plant-based milk puddings, and whole fat milk, soya, oat, coconut, and cow's milks showed the best gel unity, according to the cohesiveness results. Phase separation, an important parameter for storage stability, was not observed during 7-day storage at 4°C in all groups, except for pistachio milk rice pudding. Rheological results demonstrated that all vegan pudding samples exhibited a gel-like structure with storage modulus (G') exceeding loss modulus (G″) values. According to the descriptive sensory evaluation, coconut, oat, and soya milk rice puddings received the highest scores in overall acceptability. Our findings suggest that industrial plant-based rice puddings have great potential as a novel product that meets the dietary needs of the vegan community by offering acceptable flavor and texture.

Measurement of 90Sr and 87Sr/86Sr isotope ratio in Japanese cow milk sample using thermal ionization mass spectrometry

The pure beta emitter 90Sr (T1/2 = 28.8y) is a typical contaminant released by nuclear accidents and nuclear explosions. In the event of a nuclear disaster, it is crucial to identify radioactive pollutants quickly, to expedite the public's awareness of radiation exposure. In this work, a rapid 90Sr analysis protocol using thermal ionization mass spectrometry (TIMS) was developed for milk samples. With the improved sample preparation, Sr separation, and a newly developed TIMS method, 18 milk samples can be analyzed in less than 30 h and only 1 mL of cow milk is required for the complete analysis. The minimum detectable activity concentration of 90Sr is affected by the stable Sr concentration therefore, it is around 500 mBq·kg-1 (∼100ag·g-1). Additionally, 87Sr/86Sr isotope ratios (0.71518(9)-0.74132(4)) were determined for the first time in Japanese cow milk samples.

Influence of pre-treatment methods on quality indicators and mineral composition of plant milk from different sources of raw materials

BACKGROUND

Pre-treatment of plant materials is essential in producing plant-based products and can affect their various organoleptic and physicochemical characteristics. This work aimed to study the effect of pre-treatment of vegetable raw materials, namely ultrasonic processing and freezing of raw materials under various low-temperature conditions, to obtain multiple types of vegetable milk and determine their characteristics.

RESULTS

It is shown that by applying a certain kind of pre-treatment of vegetable raw materials it is possible to adjust organoleptic parameters and the content of solids, protein, fat, carbohydrates, fiber and mineral composition of various types of vegetable milk from soy, rice, oats, wheat, peas, buckwheat, pumpkin seeds and lentils. Ultrasound pre-treatment allows increasing of polyphenol content by an average of 15-20% for all types of plant milk, except for lentil milk. The results showed that ultrasound treatment for 3 min had the most significant effect on the overall acceptability for lentils, pumpkin, rice and pea milk. Pre-freezing at a temperature regime of -17 and -85 °C contributed to an increase in Fe, K, Zn, Ca, Mg, Si and P by an average of 30-100%, depending on the plant material.

CONCLUSION

Pre-treatment of vegetable raw materials, including freezing and ultrasonic treatment, can positively affect the macro- and micronutrient composition of plant milk. However, the effect may vary depending on the type of raw material and processing conditions. © 2023 Society of Chemical Industry.

Physical and Chemical Properties, Flavor and Organoleptic Characteristics of a Walnut and Purple Rice Fermented Plant Drink

In recent years, green and healthy foods have attracted much attention. Plant-based foods have become an alternative to animal-derived foods. In this study, we used walnut and purple rice as the primary raw materials to produce a fermented plant drink. The process included boiling, mixing, grinding, inoculation, fermentation, and sterilization. We then analyzed the similarities and differences between the resulting walnut and purple rice fermented plant drink and an unfermented walnut and purple rice plant drink, as well as dairy-based yoghurt, in terms of physical chemistry, flavor, and sensory characteristics. We also examined the similarities and differences between the walnut and purple rice fermented plant drink and room-temperature yoghurt. The study results revealed that the walnut and purple rice fermented plant drink exhibited greater viscosity than the walnut and purple rice unfermented plant drink and room-temperature yoghurt. Additionally, the former displayed enhanced stability and recovery ability. Notably, distinguishable differences were observed between the three samples in terms of the presence of unknown volatiles and the umami signal, as indicated by electronic nose/tongue and GC-IMS analyses. The umami flavor of the walnut and purple rice fermented plant drink surpasses that of room-temperature yoghurt, while its taste is less salty than that of the walnut and purple rice plant drink. Despite possessing a weaker aroma than dairy-based yogurt, it is more potent than the walnut and purple rice plant drink. Additionally, its relative abundance of olefins, ketones, and alcohols enhances its unique flavor profile, surpassing both other options. Based on sensory analysis, it can be deduced that walnut and purple rice fermented plant drink has the highest overall acceptance rate.

Leveraging new opportunities and advances in high-pressure homogenization to design non-dairy foods

High-pressure homogenization (HPH) and ultrahigh-pressure homogenization (UHPH) are emerging food processing techniques for stabilizing emulsions and food components under the pressure range from 60 to 400 MPa. Apart from this, they also support increasing nutritional profile, food preservation, and functionality enhancement. Even though the food undergoes the shortest processing operation, the treatment leads to modification of physical, chemical, and techno-functional properties, in addition to the formation of micro-sized particles. This study focuses on recent advances in using HPH/UHPH on plant-based milk sources such as soybeans, almonds, hazelnuts, and peanuts. Overall, this systematic review provides an in-depth analysis of the principles of HPH/UHPH, the mechanism of action, and their applications in other nondairy areas such as fruits and vegetables, meat, fish, and marine species. This work also deciphers the role of HPH/UHPH in modifying food components, their functional quality enhancement, and their provision of oxidative resistance to many foods. HPH is not only perceived as a technique for size reduction and homogenization; however, it does various functions like microbial inactivation, improvement of rheologies like texture and consistency, decreasing of lipid oxidation, and making positive modifications to proteins such as changes to the secondary structure and tertiary structure thereby enhancing the emulsifying properties, hydrophobicity of proteins, and other associated functional properties in many nondairy sources at pressures of 100-300 MPa. Thus, HPH is an emerging technique with a high throughput and commercialization value in food industries.

Selenium in plant-based beverages: Total content, estimated bioaccessibility and contribution to daily intake

BACKGROUND

The search for alternative protein sources has increased the consumption and commercialization of plant-based beverages (PBBs). This study aimed to determine the total Se content, estimate the bioaccessibility of selenium (Se) in commercial PBBs derived from different raw materials, and evaluate their contribution to the reference daily intake (RDI).

METHODS

An ultrasound assisted acid digestion method and ICP-MS was used to determine Se, and the INFOGEST method to estimate the bioaccessible percentages. Validation of this method was also performed, and the parameters obtained were: LOD and LOQ were 2.1 and 4.0 µg/kg, respectively. For accuracy, recovery percentages ranged from 99 % and 111 % (certified reference materials), and 95 % and 101 % (spiked experiments for bioaccessible extracts as recoveries).

RESULTS

The PBBs presented total Se content between 4 and 226 µg/kg. Bioaccessible percentages ranged from 63.5 % (mix of plant sources) to 95.9 % (produced with organic cashew nuts). Only one cashew nut PBBs supplied the daily demand of Se, representing 64.6 %, 75.3 % and 82.2 % of the RDI; for lactating and pregnant women, children (≥ 4 years) and adults, respectively.

CONCLUSIONS

The Se determination method through acid digestion assisted by ultrasound and ICP-MS was considered adequate for the PBBs samples. Se content varied according to the raw material used in sample preparation. High percentages (> 60 %) of bioaccessibility were observed and only one PBBs derived from organic cashew nuts supplied the recommended Se demand for different groups of individuals.

Analysis of Eight Types of Plant-based Milk Alternatives from the United States Market for Target Minerals and Trace Elements

A wide variety of commercial plant-based foods that are marketed and sold as alternatives for milk (plant-based milk alternatives or PBMAs) are available to consumers. In this study, PBMAs from the United States (n=85) were subjected to analysis for target minerals (magnesium, phosphorus, selenium, and zinc) to compare their variability across PBMA types, brands, and production lots. Samples were also screened for the environmental contaminant elements arsenic, cadmium, and lead. The eight PBMA types sampled were produced from almond, cashew, coconut, hemp, oat, pea, rice, and soy. Elemental analysis was conducted using microwave-assisted acid digestion followed by inductively coupled plasma-mass spectrometry. The results showed that pea PBMAs contained the highest mean amounts of phosphorus, selenium, and zinc, while soy PBMAs were highest in magnesium. Mean amounts of minerals were lower than those found in milk for the majority of PBMA types. There was significant variation (P<0.05) in amounts of minerals across the majority of product brands. The amounts of phosphorus and magnesium varied across production lots (P<0.05), but the absolute value of these differences was low. Total arsenic was highest in rice PBMAs; amounts of cadmium and lead across PBMAs were generally found at low or non-quantifiable amounts. These results underscore the importance of generating analytical data on the elemental composition of products within the rapidly growing category of PBMA.

Assessment of the Accuracy of Nutrition Label and Chemical Composition of Plant-Based Milks Available on the Italian Market

Growing health, environmental, and ethical concerns have encouraged interest in plant-based milks (PBMs), but it remains questionable whether the nutrition labeling of these products is adequately reliable for consumers, and whether nutritional standards can be defined for a given PBM type. On this basis, cereal, pseudocereal, nut, and legume PBMs available on the Italian market were analyzed in order to check the accuracy of nutritional labels on packages and generate new or updated compositional data. Most labels provided inaccurate information, especially with respect to the declared energy, fat, and saturated fat. Cereal- and pseudocereal-based PBMs were generally characterized by high MUFA (34.04-59.35%) and PUFA (21.61-52.27%). Almond, soy, rice, and hazelnut beverages displayed the highest levels of total tocopherols (11.29-13.68 mg/L), while buckwheat and spelt PBMs had the highest total polyphenol content (34.25-52.27 mg GAE/100 mL). Major and trace elements greatly varied among samples, being more abundant in buckwheat and coconut-based drinks. A PCA confirmed that nutritional standards cannot be unequivocally established for a given PBM, and indicated that, among the investigated variables, inorganic elements had more weight in the sample differentiation. Overall, to reliably guide consumers in their dietary choices, there is a need for greater accuracy in the development of nutrition labels for PBMs, as well as greater effort in assessing the nutritional quality of the ever-increasing variety of products available on the market.

Impact of Dairy Products and Plant-Based Alternatives on Dental Health: Food Matrix Effects

The impact of dairy products on dental health has been researched widely and shows an important role of various constituents, as well as the specific product matrix, in maintaining and improving dental health. These include, for instance, the position of lactose as the least cariogenic fermentable sugar, the high levels of calcium and phosphate, the presence of phosphopeptides as well as the antibacterial peptides lactoferrin and lysozyme and high buffering capacity. With plant-based alternatives for dairy products being developed and marketed these days, the specific benefits of dairy products in relation to dental health are often overlooked and most products contain more cariogenic carbohydrates, lack phosphopeptides, and have fewer minerals and less buffering capacity. Comparative studies performed to date indeed suggest that plant-based products do not match dairy counterparts when it comes to maintaining and improving dental health. Careful consideration of these aspects is required in relation to future developments of products and human diets. In this paper, we review the impact of dairy products and plant-based dairy alternatives on dental health.

“Got Milk Alternatives?” Understanding Key Factors Determining U.S. Consumers’ Willingness to Pay for Plant-Based Milk Alternatives

Milk is an important dairy product in U.S. food retail. Lifestyle changes toward climate-conscious consumption, animal welfare, and food safety concerns have increased the popularity of plant-based milk alternatives. This study is focused on such beverages and provides insights and best practice recommendations for marketing managers in the U.S. food retail sector. An online survey was distributed to explore factors explaining the intentions of U.S. consumers to purchase and pay a premium for plant-based milk alternatives. Food curiosity and food price inflation were identified as relevant for both willingness to buy and willingness to pay a price premium. In addition, animal welfare concerns and the green and clean product image of plant-based alternatives were relevant to the willingness to pay a premium for plant-based milk.

Market Basket Survey of the Micronutrients Vitamin A, Vitamin D, Calcium, and Potassium in Eight Types of Commercial Plant-Based Milk Alternatives from United States Markets

We performed a market basket survey of plant-based milk alternatives (PBMAs) from the US market for vitamin A, vitamin D, calcium, and potassium to identify the amount and variability of these micronutrients across various PBMAs. The PBMA types included in this analysis were almond, cashew, coconut, hemp, oat, pea, rice, and soy (n=90 total product units). Analyses for vitamin A (as retinyl palmitate), vitamin D2/D3, and minerals were performed using high-performance liquid chromatography, liquid chromatography-tandem mass spectrometry, and inductively coupled plasma-mass spectrometry, respectively. A majority of PBMA types had significant differences (P<0.05) in the amounts of target micronutrients across brands. The coefficient of variation (%CV) for micronutrient concentrations within one lot of a single brand ranged from 4.1-42.2% for vitamin A, 1.5-44.1% for vitamin D, 1.7%-37.6% for calcium, and 0.7%-39.0% for potassium. The variability of these micronutrients should be taken into account when considering the nutritional value of PBMAs.

Cow's Milk in Human Nutrition and the Emergence of Plant-Based Milk Alternatives

Cow's milk is considered a complete food, providing high-quality protein and essential micronutrients, including vitamins and minerals. For medical reasons or as a lifestyle choice, consumers are replacing cow's milk with plant-based milk alternatives (PBMA); some perceive them as healthier alternatives to cow's milk due to their low saturated fatty acid content and no cholesterol content. However, the nutritional composition of PBMA is quite variable between different types and even within, which makes a comparison with cow's milk a complex issue. Furthermore, the consumption of PBMA has been associated with the development of some diseases in infants and children. Meanwhile, the consumption of cow's milk in human health is a controversial issue since it has been associated with a favorable effect in some diseases (such as obesity, type 2 diabetes, and Alzheimer's) and a negative effect in others (such as prostate cancer risk and Parkinson's disease); while in some diseases, there is no consensus in the cow's milk consumption effect. The aim of this review is to make a nutritional comparison of cow's milk with PBMA and to clarify the potential health issues related to their consumption.

Quantitative Determination of Bisphenol A and Its Congeners in Plant-Based Beverages by Liquid Chromatography Coupled to Tandem Mass Spectrometry

The consumption of plant-based beverages as an alternative to cow's milk has recently gained vast attention worldwide. The aim of this work is to monitor the intake of Bisphenol A (BPA), Bisphenol B (BPB) and Bisphenol S (BPS) in the Italian population through the consumption of these foodstuffs. Specifically, the development and validation of an analytical procedure for the quantitative determination of the analytes by liquid chromatography coupled to tandem mass spectrometry was reported. Thirty-four samples of plant-based beverages (soya, coconut, almond, oats and rice) of popular brands marketed in Italy were analyzed. BPA was found in 32% of the samples, while BPB was found in 3% of the samples. The risk assessment using the Rapid Assessment of Contaminant Exposure (RACE) tool demonstrated that there was no risk for all population groups, when using the current Tolerable Daily Intake (TDI) of 4 ng/kg body weight (bw)/day as a toxicological reference point. In contrast, using the new temporary TDI of 0.04 ng/kg bw/day, the existing risk was found to be real for all population groups. If this value were to become final, even more attention would have to be paid to the possible presence of BPA in food to protect consumer health.

Essential and Non-essential Trace Elements in Milks and Plant-Based Drinks

Although milk and plant-based drinks are widely consumed foodstuffs with high nutritional value, their consumption may also mean intake of non-essential/toxic elements becoming a risk for human health. This study was aimed at determining the concentrations of essential (Ca, Co, K, Mg, Mn, Na, Ni and P) and non-essential/toxic (Hg, Pb, U and V) elements in milks (cow and goat), plant-based drinks (soy, almond, rice and oat) and infant formulas from organic and conventional production systems. Lactose-free, fresh and ultra-high-temperature (UHT) milks were also included. Chemical analyses were performed by means of inductively coupled plasma-mass spectrometry (ICP-MS). The content of the elements hereby assessed did not depend on the production system and the presence of lactose. However, significant differences were found in the concentrations of multiple elements when comparing sterilization methods, source (animal vs. plant-based) and animal species. Non-essential elements were not detected in milks and plant-based drinks, excepting Pb, which was detected in three samples. While the consumption of goat milk is recommended, considering the global intake of essential elements and the absence of non-essential elements, further studies should be conducted to confirm the absence of non-target toxic elements at very low trace levels. On the other hand, the best plant-based drinks are those made up with almonds (intake of Ca) and soy (K and Mg). The current results should be useful to help the population to balance the benefits and risks from milks and plant-based drinks consumption, as well as to adapt their dietary habits.

Nutritional assessment of plant-based beverages in comparison to bovine milk

Plant-based beverages (PBB) are often marketed and used by consumers as alternatives to ruminant milks, particularly bovine milk (hereafter referred to as milk). However, much research has established that there is variation in nutritional composition among these products, as well as demonstrating that they are largely not nutritional replacements for milk. A survey of the prices and nutrition labels of PBB available in New Zealand supermarkets was undertaken. Selected almond, coconut, oat, rice, and soy PBB products were then analyzed for nutritional content, including energy, fat, protein, amino acid, bioavailable amino acid, and trace element contents. Finally, the protein and calcium contents of well-mixed and unshaken products were analyzed to ascertain the impact of colloidal stability on nutrient content. All PBB groups were more expensive than milk on average, while their declared nutrient contents on package labels was highly variable within and between groups. Analyses of selected PBB revealed that soy products had the most similar proximate composition to milk, while all other PBB groups contained less than 1.1 g protein per 100 mL on average. Many PBB were fortified with calcium to a similar concentration as that in milk. Shaken and unshaken samples showed divergent protein and calcium content for several PBB products but had no effect on the composition of milk, indicating that the nutrient content of PBB at the point of consumption will be dependent on whether the product has been shaken. Only the soy PBB had comparable amino acid content and bioavailability to milk. Overall, our results demonstrate the diversity in composition and nutritional properties of PBB available in New Zealand. While the existent environmental footprint data on PBB shows that they generally have lower carbon emissions than milk, milk currently accounts for approximately 1% of the average New Zealand resident’s consumption-based emissions. Except for calcium-fortified soy PBB, none of the commercially available PBB had nutritional compositions that were broadly comparable to milk.

Morpho-physiological and molecular responses of Lepidium sativum L. seeds induced by bismuth exposure

Bismuth (Bi) is considered a "green metal" as its toxicity has been reported to be lower than other metals, particularly lead. Even though the low presence in the environment, an increase of Bi concentrations in soil and wastewater is predictable due to its enhanced uses for many industrial and medical applications. Therefore, given the little literature on the matter, particularly in plants, information on the effects of Bi on living organisms is needed. In this study, seeds of garden cress (Lepidium sativum L.), a model plant for ecotoxicological assays (OECD), were exposed to increasing Bi concentrations (0 to 485 mg L^-1 Bi(NO₃)₃·5H₂O in deionised water) in petri plates. After 72 h, the percent germination index (GI%) revealed no effects at the lowest Bi concentrations, while a slight toxicity occurred at 242 and 485 mg L^-1 Bi nitrate. A significant reduction of the root length was observed in Bi-treated seedlings, especially at the highest Bi concentrations. Consistently, the Alkaline Comet Assay revealed a genotoxic effect induced by Bi exposure in garden cress seedlings. A Bi concentration-dependent metal accumulation in plantlets was also observed, with a Bi concentration higher than 1200 mg kg^-1 found in plantlets at the highest Bi concentration assayed. The toxicity effects observed in the study were discussed, as contribution to the expansion of knowledge on Bi ecotoxicity and genotoxicity in plants.

A Comparative Analysis of Plant-Based Milk Alternatives Part 1: Composition, Sensory, and Nutritional Value

Consumers are becoming increasingly interested in reducing the consumption of animal-based foods for health, sustainability, and ethical reasons. The food industry is developing products from plant-based ingredients that mimic animal-based foods’ nutritional and sensory characteristics. In this study, the focus is on plant-based milk alternatives (PBMAs). A potential problem with plant-based diets is the deficiency of important micronutrients, such as vitamin B12, B2, and calcium. Therefore, an analysis of micronutrients in PBMAs was conducted to assess their nutritional value. The second main focus was on the sensory description of the PBMAs, done by a trained panel, and instrumental assessment to characterize the sensory attributes. Almond drinks met the daily micronutrient requirements the least, while soy drinks came closest to cow’s milk in macro- and micronutrients. The experimentally determined electronic tongue and volatile compound results confirmed the sensory panel’s evaluations and could therefore be used as a method for easy and effective assessments of PBMAs. The PBMAs evaluated in this study could not completely replace cow’s milk’s nutritional and sensory properties. They are products in their own product group and must be evaluated accordingly. Given the variety of products, consumers should experiment and make their decisions regarding the substitution of cow’s milk.

Multielement Characterization and Antioxidant Activity of Italian Extra-Virgin Olive Oils

Food product safety and quality are closely related to the elemental composition of food. This study combined multielement analysis and chemometric tools to characterize 237 extra-virgin olive oil (EVOO) samples from 15 regions of Italy, and to verify the possibility of discriminating them according to different quality factors, such as varietal or geographical origin or whether they were organically or traditionally produced. Some elements have antioxidant properties, while others are toxic to humans or can promote oxidative degradation of EVOO samples. In particular, the antioxidant activity of oils’ hydrophilic fraction was estimated and the concentrations of 45 elements were determined by inductively coupled plasma mass spectrometry (ICP-MS). At first, univariate and multivariate analyses of variance were used to compare the element concentrations, and statistically significant differences were found among samples from different regions. Successively, discriminant classification approaches were used to build a model for EVOO authentication, considering, in turn, various possible categorizations. The results have indicated that chemometric methods coupled with ICP-MS have the potential to discriminate and characterize the different types of EVOO, and to provide “typical” elemental fingerprints of the various categories of samples.

Reusable Water Bottles: Release of Inorganic Elements, Phthalates, and Bisphenol A in a “Real Use” Simulation Experiment

Reusable water bottles are growing in popularity; thus, possible chemical release from the internal surface into water should be carefully considered to control related health risks. We experimentally evaluated the release into deionized water of 40 elements, six phthalates, and bisphenol-A for 20 different reusable bottles by simulating the use in real world scenario. The 20 bottles, identified as those most purchased in Italy, were made of various materials (stainless steel, aluminum, plastic, and silicone). The experiment was carried out for four consecutive weeks in duplicate for each type of bottle. Our results showed the release, to various extents, of inorganic elements from all 20 bottles, while the release of phthalates and bisphenol-A was never found. The elements most frequently released were Al, Sr, Mo, and Cr, while the highest concentrations were for Ca, K, Mg, and Na; the release of toxic elements (such as Pb, Cd, Ni, Sb) also occurred. The comparison of our results with regulatory limits on drinking water quality revealed no exceeding values except for Al. However, these releases represent a further intake, and the related risks cannot be neglected, especially for highly susceptible populations. Thus, it is essential to correctly inform consumers both with dedicated interventions and exhaustive labelling.

An Analytical Method for the Biomonitoring of Mercury in Bees and Beehive Products by Cold Vapor Atomic Fluorescence Spectrometry

Bees and their products are useful bioindicators of anthropogenic activities and could overcome the deficiencies of air quality networks. Among the environmental contaminants, mercury (Hg) is a toxic metal that can accumulate in living organisms. The first aim of this study was to develop a simple analytical method to determine Hg in small mass samples of bees and beehive products by cold vapor atomic fluorescence spectrometry. The proposed method was optimized for about 0.02 g bee, pollen, propolis, and royal jelly, 0.05 g beeswax and honey, or 0.1 g honeydew with 0.5 mL HCl, 0.2 mL HNO₃, and 0.1 mL H₂O₂ in a water bath (95 °C, 30 min); samples were made up to a final volume of 5 mL deionized water. The method limits sample manipulation and the reagent mixture volume used. Detection limits were lower than 3 µg kg⁻¹ for a sample mass of 0.02 g, and recoveries and precision were within 20% of the expected value and less than 10%, respectively, for many matrices. The second aim of the present study was to evaluate the proposed method’s performances on real samples collected in six areas of the Lazio region in Italy.

Quinoa (Chenopodium quinoa Willd.) Seeds Increase Intestinal Protein Uptake

SCOPE

Within the last decade, quinoa seeds have gained much popularity as a new food and have recently been proposed as an appropriate food for early introduction in infants. Quinoa contains high levels of saponins, which are known for their adjuvant activity and effect on the intestinal barrier function. The aim of this study is to investigate the impact of quinoa on intestinal permeability and inflammation in comparison with the positive controls; cholera toxin (CT), and capsaicin.

METHODS AND RESULTS

The effect of quinoa on intestinal barrier function and inflammation is investigated in vitro using a Caco-2 cell line and in vivo using a Brown Norway rat model. Effects in vivo are analyzed by protein uptake, histology, gene expression, antibody levels, and flow cytometry. Quinoa and the positive controls all increased the intestinal permeability, but distinct patterns of absorbed protein are observed in the epithelium, Peyer's patches, lamina propria, and serum. The quinoa-mediated effect on intestinal barrier function is found to be distinct from the effect of the two positive controls.

CONCLUSION

The findings demonstrate the ability of quinoa to increase intestinal permeability and to promote compartment-specific protein uptake via mechanisms that may differ from CT and capsaicin.

Determination of 40 Elements in Powdered Infant Formulas and Related Risk Assessment

The aim of the study was to analyze all powdered infant formulas authorized and commercialized in Italy at the time of the study to measure the concentrations of 40 elements, and to estimate the infants’ intake of some toxic heavy metals for assessing possible related health risks. For this purpose, an optimized multi-element method was used through inductively coupled plasma mass spectrometry. Be, B, Al, Zr, Nb, Sb, Te, W, V, Cr and As concentrations were <LOD in more than 30% of samples. The levels of the other elements resulted to be very variable (more than 2000 µg g⁻¹ for Ca and K or less than 1 ng g⁻¹ for others). The results were similar to those reported by other European Union (EU) studies, but different from those recovered outside the EU. These differences should be eliminated to guarantee the right to health worldwide. The concentrations of Cd, Mn, Ni, Pb, and Zn in the infant formulas studied were always below the considered limits. However, it is important to check for potentially toxic elements in infant formulas to protect the health of this sensitive population. The data found in this study could be used as benchmark data for future research.

An optimized method for sample preparation and elemental analysis of extra-virgin olive oil by inductively coupled plasma mass spectrometry

The accurate determination of trace elements in vegetable edible oils is still an analytical challenge, owing to their low concentration levels and the complex matrix of the vegetable oils. The aim of this study was to develop a fast and simple analytical method to quantify 45 elements in small mass samples (0.5 g) of extra virgin olive oils by inductively coupled plasma mass spectrometry. To evaluate the best and fastest sample preparation procedure, ultrasonic extraction and wet digestion methods were compared using oil certified reference material with different reagent mixtures, reagent volumes, and times for sample extraction or digestion. The use of 5 mL reagent mixture F [10% (v/v) HNO₃ and H₂O₂, 2:1 (v/v)] for sample digestion in a water bath (95 °C, 40 min) was found to produce satisfactory results in all cases as validated from sample recovery experiments over three different extra virgin olive oil samples.

Lactose Intolerance and Its Dietary Management: An Update

Milk is the most common food consumed worldwide and is also a major ingredient in the preparation of various dairy products. However, despite the high production and consumption of milk and milk-based products, there is a large percent of the world's population that suffer from allergies to milk solids and lactose intolerance. Lactose intolerance specifically means the inability of the body to breakdown the sugar to its simplest form for assimilation and it is due to the inefficiency or lack of the enzyme in the human body. The most convenient prevention method for the affected population is to avoid milk and milk-based products but this may be a cause of development of other health related issues that result from inadequate nutrient consumption. To help find an alternative to this problem, this study aims at first studying the underlying information on lactose intolerance and then studying plant-based beverages as a possible alternative to milk and milk-based products. Key teaching pointsLactose intolerance specifically means the inability of the body to breakdown the sugar to its simplest form for assimilation and it is due to the inefficiency or lack of the enzyme in the human body.Consumption of probiotics may help relieve the symptoms of lactose intolerance.Soy beverage can be an economical alternative for lactose intolerant populations and has calcium content comparable to bovine milk.Calcium absorption in fortified plant based beverages depends upon type of calcium salt used.

Elemental concentration and migratability in bioplastics derived from organic waste

In line with the Circular Economy approach, the production of polyhydroxyalkanoate (PHA) with organic waste as the feedstock may a biotechnological application to reduce waste and recover high-value materials. The potential contaminants that could transfer from bio-waste to a PHA include inorganic elements, such as heavy metals. Hence, the total content and migratability of certain elements were evaluated in several PHA samples produced from different origins and following different methods. The total content of certain elements in PHA ranged between 0.0001 (Be) and 49,500 mg kg^-1 (Na). The concentrations of some alkaline (Na and K) and alkaline earth (Ca and Mg) metals were highest, which are of little environmental concern. The feedstock type and PHA stabilisation and extraction procedures affected the element contents. Several sets of experiments were conducted to evaluate the migration of elements from the PHA samples under different storage times, temperatures, and pH levels. The total contents of some heavy metals (As, Cd, Fe, Hg, Ni, Pb, and Zn) in PHA produced from fruit waste or crops (commercial PHA) were lower than those in the PHA samples produced from the mixture of the organic fraction of municipal waste and sludge from wastewater treatment. Both the PHA obtained by extraction from wet biomass (acid storage) with aqueous phase extraction reagents and commercial PHA were below the migration limits stipulated by the current Toy Safety Directive and by Commission Regulation (EU) October 2011 on plastic materials and articles intended to come into contact with food under frozen and refrigerated conditions.

Recent Techniques in Nutrient Analysis for Food Composition Database

Food composition database (FCD) provides the nutritional composition of foods. Reliable and up-to date FCD is important in many aspects of nutrition, dietetics, health, food science, biodiversity, plant breeding, food industry, trade and food regulation. FCD has been used extensively in nutrition labelling, nutritional analysis, research, regulation, national food and nutrition policy. The choice of method for the analysis of samples for FCD often depends on detection capability, along with ease of use, speed of analysis and low cost. Sample preparation is the most critical stage in analytical method development. Samples can be prepared using numerous techniques; however it should be applicable for a wide range of analytes and sample matrices. There are quite a number of significant improvements on sample preparation techniques in various food matrices for specific analytes highlighted in the literatures. Improvements on the technology used for the analysis of samples by specific instrumentation could provide an alternative to the analyst to choose for their laboratory requirement. This review provides the reader with an overview of recent techniques that can be used for sample preparation and instrumentation for food analysis which can provide wide options to the analysts in providing data to their FCD.

Effectiveness of Different Sample Treatments for the Elemental Characterization of Bees and Beehive Products

Bee health and beehive products’ quality are compromised by complex interactions between multiple stressors, among which toxic elements play an important role. The aim of this study is to optimize and validate sensible and reliable analytical methods for biomonitoring studies and the quality control of beehive products. Four digestion procedures, including two systems (microwave oven and water bath) and different mixture reagents, were evaluated for the determination of the total content of 40 elements in bees and five beehive products (beeswax, honey, pollen, propolis and royal jelly) by using inductively coupled plasma mass and optical emission spectrometry. Method validation was performed by measuring a standard reference material and the recoveries for each selected matrix. The water bath-assisted digestion of bees and beehive products is proposed as a fast alternative to microwave-assisted digestion for all elements in biomonitoring studies. The present study highlights the possible drawbacks that may be encountered during the elemental analysis of these biological matrices and aims to be a valuable aid for the analytical chemist. Total elemental concentrations, determined in commercially available beehive products, are presented.