Raman spectroscopy of heat-induced fine-stranded and particulate β-lactoglobulin gels

Effects of chickpea protein-stabilized Pickering emulsion on the structure and gelling properties of hairtail fish myosin gel

The effects of different amount (0-12%) of chickpea protein-stabilized Pickering emulsion (CPE) on the gelling properties, intermolecular interactions, microstructure, and physicochemical stability of hairtail fish myosin gels were investigated. The myosin gel with 6%-9% CPE demonstrated significantly higher viscoelasticity, gel strength, hardness, water-holding capacity and whiteness, compared to the control (P < 0.05). In addition, Raman spectroscopy showed that CPE changed the microenvironment of the myosin, which promoted the changes in protein secondary structures, disulfide bond conformation and the local environments of the composite gels. The addition of 6%-9% CPE also enhanced the disulfide bond and hydrophobic interaction of myosin gels which induced more compact gel network structures. Furthermore, CPE improved the lipid oxidative stability and freeze-thaw stability of myosin gel. The results indicated that CPE could improve the gelling properties of myosin, making it a potential new additive and lipid substitute for the development of new emulsion gel products.

Effects of pulsed ultrasound treatment on the physicochemical and textural properties of chicken myofibrillar protein gel

This study explored the effects of varying the time of pulsed ultrasound (PUS) treatment on the physicochemical and textural properties of chicken myofibrillar protein (CMP) gel. The solubility rapidly increased at ≤ 6 min and then steadily decreased, while the particle size showed the opposite trend. At longer PUS treatment times, the total sulfhydryl（-SH）and reactive SH content of CMP gel all decreased. The absolute value of the zeta potential and surface hydrophobicity at 6 min were higher. The most hydrogen bonds were formed. G' and G″ were also optimal, indicating that a more viscoelastic gel was formed. Meanwhile, the textural properties (including hardness and springiness) were significantly improved by PUS. These findings show that PUS significantly affected the physicochemical and textural properties of CMP gel, and at 6 min, the best gel hardness and springiness were achieved.

Whey protein films reinforced with bacterial cellulose nanowhiskers: Improving edible film properties via a circular economy approach

Edible films were developed using whey protein concentrate (WPC) and a natural bio-polymer, namely bacterial cellulose (BC). BC was produced via fermentation from orange peels and subsequently acid-hydrolyzed to obtain BC nanowhiskers (BCNW) with high crystallinity (XRD analysis). Morphology of BCNW was analyzed by SEM, TEM, and AFM. WPC/BCNW film composites, containing different amounts of BCNW (0.5-15%, w/w) were developed and characterized. WPC/BCNW film composite was analyzed by Raman spectroscopy, indicating the successful incorporation and the homogenous distribution of BCNW into the WPC film matrix. Mechanical characterization showed that BCNW behaved as a reinforcing filler in the WPC film, increasing tensile strength and Young's modulus by 32% and 80%, respectively. In addition, water vapor permeability was reduced by 33.9% upon the addition of 0.5% BCNW. This study presented a sustainable approach towards the production of WPC films with improved tensile and water barrier properties, suggesting its potential application as a packaging material.

The effect of shower time, electrolyte treatment, and electrical stimulation on meat quality of cattle longissimus thoracis muscle in cold weather

The effects of three treatments (two levels each), namely shower time (ST), electrolyte treatment (ET), and electrical stimulation (ES), on meat quality were investigated using 112 cattle which were randomly allocated to different combinations of each treatment level. ST2, compared with ST1, increased ultimate pH from 6.05 to 6.23 and blood adrenaline levels while deteriorating beef color. ST2 also improved the water-holding capacity (WHC), exhibiting more immobilized water and less free water. Finally, it promoted protein unfolding and the conversion of α-helix to random coil, thus producing tenderer beef. In contrast, results indicated that ET either decreased pH_u in ST1 groups or relieved pre-slaughter stress in ST2 groups. ES accelerated pH₁ drop with maximum efficiency in an ST1-ET combination, but it did not alter pH_u. In addition, ES decreased WHC with an enlarged relaxation time for bound water while causing beef tenderization through protein unfolding. ST1-ET(-ES/NES) maximized pH_u reduction and provided an alternative for dark-cutting prevention in cold weather.

New insights into food O/W emulsion gels: Strategies of reinforcing mechanical properties and outlook of being applied to food 3D printing

3D printing technology has been widely used in food processing with its advantages of customized food design, personalized nutrition design, and simplified food supply chain. Food emulsion gels have application value and prospects in food 3D printing due to their promising properties, including biodegradability, biocompatibility, as well as dual characteristics of emulsions and biopolymer gels. Food emulsion gels with appropriate mechanical properties, as a new type of food inks, expand the types and functions of the inks. However, food emulsion gels without adequate reinforced mechanical properties may suffer from defects in shape, texture, mouthfeel, and functionality during 3D printing and subsequent applications. Therefore, it is necessary to summarize the strategies to improve the mechanical properties of food emulsion gels. According to the methods of characterizing the mechanical properties of emulsion gels, this article summarizes four strategies for improving the mechanical properties of emulsion gels through two ways: inside-out (reinforcement of interface and reinforcement of cross-linking) and outside-in (physical approaches and environmental regulations), as well as their basic mechanisms. The application status and future research trends of emulsion gels in food 3D printing are finally discussed.

Effects of γ-polyglutamic acid on the gelling properties and non-covalent interactions of fish gelatin

The effects of γ-polyglutamic aid (γ-PGA) on the gelling properties and non-covalent interactions of fish gelatin were investigated. The gel strength and melting temperature of fish gelatin gradually increased, with increasing γ-PGA concentration, although there was no significant change when the γ-PGA concentration was greater than 0.04%. As the concentration of γ-PGA increased, the electrostatic interaction of fish gelatin increased and the hydrophobic interaction between gelatin molecules decreased. The fish gelatin system was comprised of γ-PGA concentrations of 0.04 and 0.06% showing a strong hydrogen bond. When the γ-PGA concentration increased from 0 to 0.04%, more phenolic hydroxyl groups in the tyrosine residue tended to form hydrogen bonds with the protein. However, an additional increase in γ-PGA concentration to 0.1% led to enhanced hydrogen bonding with water molecules. The results of this study showed that hydrogen bonds played an important role in improving the gelling properties of gelatin by γ-PGA.

Effect of the Solid Fat Content on Properties of Emulsion Gels and Stability of β-Carotene

Whey-protein-isolate-based emulsion gels were prepared through a cold-set gelation process, and the effect of the solid fat (coconut oil) content in the oil phase on gel properties and β-carotene stability was investigated. An increase in solid fat content (0, 20, 50, 80, and 100% of the oil phase) resulted in a smaller droplet size, higher viscosity, and improved creaming stability of the emulsions. When glucono-δ-lactone was added to initiate gelation, a higher solid fat content contributed to an earlier onset of gelation and a higher storage modulus of the gels. Textural analysis indicated that the increase in the solid fat content allowed for an increase in fracture stress and Young's modulus of the emulsion gels. Microscopic observation revealed that emulsions containing a higher solid fat content formed gels with a denser and more uniform particulate network structure. The stability of β-carotene against thermal treatment (55 °C for 12 days) and ultraviolet light exposure (8 h) was determined. The results suggested that the solidification of the oil phase can improve the stability of β-carotene, and gels with higher hardness were capable of retaining more β-carotene after the treatments. These findings indicated that emulsion gels with a solidified oil phase could be potential delivery systems for lipophilic bioactive compounds.

Characterization of zein assemblies by ultra-small-angle X-ray scattering

Zein, a major corn protein, has an amphiphilic molecule capable of self-assembling into distinctly different structures, i.e., rods, sheets, and spheres. In this work, ultra-small-angle X-ray scattering (USAXS) was applied to investigate the formation of self-assembled zein structures in binary solvent systems of ethanol and water. The study included observing structural changes due to aging. Three distinctive regions, each corresponding to different co-existing structures having a hierarchical organization, were observed in zein-solvent systems. Rod shaped (R_g = 1.5-2.5 nm, P = 1) primary structural units were identified, believed to be molecular zein. Two-dimensional sheet-like structures (R_g = 80-200 nm, 2 < P < 3) were observed, believed to be formed by primary units first assembled into one-dimensional fibers and then into 2D sheet structures. Also, large three-dimensional spherical aggregates were observed (R_g > 1000 nm, P = 4), believed to have assembled from two-dimensional sheet structures. Aging did not change the size or the shape of the primary units, but USAXS detected changes in R_g and P values of the intermediate structures, pointing to a further level of self-assembly where proteins develop a more regular and organized structure. The viscoelastic moduli (G' and G''), the consistency index (K) and the flow behavior index (n), were also measured to investigate the effect of zein structural development by self-assembly on rheological behavior. Samples became more solid-like with aging. Raman spectra suggested that zein underwent secondary structure transformations from α-helix to β-sheets, which influenced the size and morphology of molecular assemblies and ultimately the rheological properties of zein solutions.

Structure of Spherulites in Insulin, β-Lactoglobulin, and Amyloid β

Under denaturing conditions such as low pH and elevated temperatures, proteins in vitro can misfold and aggregate to form long rigid rods called amyloid fibrils; further self-assembly can lead to larger structures termed spherulites. Both of these aggregates resemble amyloid tangles and plaques associated with Alzheimer's disease in vivo. The ability to form such aggregates in a multitude of different proteins suggests that it is a generic ability in their mechanism to form. Little is known about the structure of these large spherulites ranging from 5 to 100 microns and whether they can reproducibly form in amyloid β (1-40) (Aβ40), a 40-amino acid residue peptide, which is one of the major components of Alzheimer's amyloid deposits. Here, we show that spherulites can readily form in Aβ40 under certain monomerization and denaturing conditions. Using polarized and nonpolarized Raman spectroscopy, we analyzed the secondary structure of spherulites formed from three different proteins: insulin, β-lactoglobulin (BLG), and Aβ40. Visually, these spherulites have a characteristic "Maltese Cross" structure under crossed polarizers through an optical microscope. However, our results indicate that insulin and Aβ40 spherulites have similar core structures consisting mostly of random coils with radiating fibrils, whereas BLG mostly contains β-sheets and fibrils that are likely to be spiraling from the core to the edge.

Effect of high intensity ultrasound on transglutaminase-catalyzed soy protein isolate cold set gel

The effects of high intensity ultrasound (HIU, 105-110 W/cm(2) for 5 or 40 min) pre-treatment of soy protein isolate (SPI) on the physicochemical properties of ensuing transglutaminase-catalyzed soy protein isolate cold set gel (TSCG) were investigated in this study. The gel strength of TSCG increased remarkably from 34.5 to 207.1 g for TSCG produced from SPI with 40 min HIU pre-treatment. Moreover, gel yield and water holding capacity also increased after HIU pre-treatments. Scanning electron microscopy showed that HIU of SPI resulted in a more uniform and denser microstructure of TSCG. The content of free sulfhydryl (SH) groups was higher in HIU TSCG than non-HIU TSG, even though greater decrease of the SH groups present in HIU treated SPI was observed when the TSCG was formed, suggesting the involvement of disulfide bonds in gel formation. Protein solubility of TSCG in both denaturing and non-denaturing solvents was higher after HIU pretreatment, and changes in hydrophobic amino acid residues as well as in polypeptide backbone conformation and secondary structure of TSCG were demonstrated by Raman spectroscopy. These results suggest that increased inter-molecular ε-(γ-glutamyl) lysine isopeptide bonds, disulfide bonds and hydrophobic interactions might have contributed to the HIU TSCG gel network. In conclusion, HIU changed physicochemical and structural properties of SPI, producing better substrates for TGase. The resulting TSCG network structure was formed with greater involvement of covalent and non-covalent interactions between SPI molecules and aggregates than in the TSCG from non-HIU SPI.

Structural Changes in Rice Bran Protein upon Different Extrusion Temperatures: A Raman Spectroscopy Study

Raman spectroscopy is critically evaluated to establish the limits to which it may be used to detect changes in protein conformation upon extrusion. Rice bran protein (RBP) extruded with different temperatures (100, 120, 140, and 160°C, labeled as ERBP-) was considered. DSC showed that extrusion at 100°C increasedTDof RBP but decreased itsΔH, while, after extrusion treatment at 120°C, RBP completely denatured. A progressive increase in unordered structure and a general decrease inα-helix structure andβ-sheet structure of extruded RBP were observed from Raman study. Meanwhile the content of unordered structure increased up to 140°C and then decreased at 160°C, while the trend ofα-helix andβ-sheet content was opposite, which was contributed to the composite effect of formation of some more protein aggregation and protein denaturation. Extrusion generally induced a significant decrease in Trp band near 760 cm−1but an increase at 160°C. No significant difference was observed in Tyr doublet ratios between controlled RBP samples and extruded RBP below 160°C, whereas Tyr doublet ratios of extruded RBP decreased at 160°C. Intensity of the band assigned toCHnbending decreased progressively and then increased as extrusion temperature increased, indicating changes in microenvironment and polarity.

Concomitant Raman spectroscopy and dynamic light scattering for characterization of therapeutic proteins at high concentrations

A Raman spectrometer and dynamic light scattering system were combined in a single platform (Raman-DLS) to provide concomitant higher order structural and hydrodynamic size data for therapeutic proteins at high concentration. As model therapeutic proteins, we studied human serum albumin (HSA) and intravenous immunoglobulin (IVIG). HSA concentration and temperature interval during heating did not affect the onset temperatures for conformation perturbation or aggregation. The impact of pH on thermal stability of HSA was tested at pHs 3, 5, and 8. Stability was the greatest at pH 8, but distinct unfolding and aggregation behaviors were observed at the different pHs. HSA structural transitions and aggregation kinetics were also studied in real time during isothermal incubations at pH 7. In a forced oxidation study, it was found that hydrogen peroxide (H2O2) treatment reduced the thermal stability of HSA. Finally, the structure and thermal stability of IVIG were studied, and a comprehensive characterization of heating-induced structural perturbations and aggregation was obtained. In conclusion, by providing comprehensive data on protein tertiary and secondary structures and hydrodynamic size during real-time heating or isothermal incubation experiments, the Raman-DLS system offers unique physical insights into the properties of high-concentration protein samples.

An experimental and theoretical study of the amino acid side chain Raman bands in proteins

The Raman spectra of a series of tripeptides with the basic formula GlyAAGly where the central amino acid (AA) was tryptophan, tyrosine, phenylalanine, glycine, methionine, histidine, lysine and leucine were measured in H2O. The theoretical Raman spectra obtained using density functional theory (DFT) calculations at the B3LYP/6-311+G(2df,2pd) level of theory allows a precise attribution of the vibrational bands. The experimental results show that there is a blue shift in the frequencies of several bands of the amino acid side chains in tripeptides compared to free amino acids, especially in the case of AAs containing aromatic rings. On the other hand, a very good agreement was found between the Raman bands of AA residues in tripeptides and those measured on three model proteins: bovine serum albumin, β-lactoglobulin and lysozyme. The present analysis contributes to an unambiguous interpretation of the protein Raman spectra that is useful in monitoring the biological reactions involving AA side chains alteration.

Investigation of the structure of alpha-lactalbumin protein nanotubes using optical spectroscopy

Alpha-lactalbumin (α-la) is one of the major proteins in whey. When partially hydrolysed with Bacillus licheniformis protease, it produces nanotubular structures in the presence of calcium ions by a self-assembly process. This study presents investigation of α-la protein structure during hydrolysis and nanotube formation using optical spectroscopy. Before spectroscopic measurements, nanotubes were examined with microscopy. The observed α-la nanotubes (α-LaNTs) were in the form of regular hollow strands with a diameter of about 20 nm and the average length of 1 μm. Amide and backbone vibration bands of the Raman spectra displayed remarkable conformational changes in α and β domains in the protein structure during nanotube growth. This was confirmed by the Fourier-transform infrared (FTIR) spectroscopy data. Also, FTIR analysis revealed certain bands at calcium (Ca++) binding sites of COO− groups in hydrolysed protein. These sites might be critical in nanotube elongation.

The self-assembly, aggregation and phase transitions of food protein systems in one, two and three dimensions

The aggregation of proteins is of fundamental relevance in a number of daily phenomena, as important and diverse as blood coagulation, medical diseases, or cooking an egg in the kitchen. Colloidal food systems, in particular, are examples that have great significance for protein aggregation, not only for their importance and implications, which touches on everyday life, but also because they allow the limits of the colloidal science analogy to be tested in a much broader window of conditions, such as pH, ionic strength, concentration and temperature. Thus, studying the aggregation and self-assembly of proteins in foods challenges our understanding of these complex systems from both the molecular and statistical physics perspectives. Last but not least, food offers a unique playground to study the aggregation of proteins in three, two and one dimensions, that is to say, in the bulk, at air/water and oil/water interfaces and in protein fibrillation phenomena. In this review we will tackle this very ambitious task in order to discuss the current understanding of protein aggregation in the framework of foods, which is possibly one of the broadest contexts, yet is of tremendous daily relevance.

Structural characterisation of partially glycosylated whey protein as influenced by pH and heat using surface-enhanced Raman spectroscopy

Maillard-induced glycosylation of whey protein improves solubility and thermal stability over a wide pH range. However, the relationship between structural changes and functional enhancement upon glycosylation is not well-characterized. Therefore, our objective was to characterise these structural changes and determine the protein conformation at various pH and thermal treatments, using surface-enhanced Raman-spectroscopy. The spectra of glycosylated protein revealed a new peak at 983 cm(-1) that can be used as a Raman marker for the early stage glycosylation. Upon glycosylation, structural variations were significant at the disulfide, hydrophobic, amide III, amide II, and amide I regions. Ionisation of carboxyl groups at all tested pH values, and increased β-sheet configuration were also observed. The noted structural modifications imparted molecular rigidity and a consequent resistance to denaturation upon thermal treatment over a wide pH range. These findings can be used to explain various functional enhancements of whey protein upon glycosylation.

Analysis of the mechanism of lysozyme pressure denaturation from Raman spectroscopy investigations, and comparison with thermal denaturation

Pressure denaturation of lysozyme dissolved in H(2)O and D(2)O was analyzed using Raman investigations in a wide frequency range. The simultaneous analysis of regions corresponding to the molecular fingerprint of the protein (500-1800 cm(-1)), and the low- (50-450 cm(-1)) and high- (2600-3800 cm(-1)) frequency spectra, allow us to probe protein denaturation and the organization of water molecules. The pressure- and heat-induced transformations are compared. Both pressure- and heat-denatured states are obtained through an intermediate state characterized by intact secondary structure and enhanced water penetration in the tertiary structure. As a consequence of a weaker penetration upon pressurizing, it was found that the pressure-denatured state was partially unfolded compared with the heat-denatured state. The mechanism of pressure denaturation was related to the disruption of the hydrogen-bond network of water onto a set of clusters characterized by strengthened O - H interactions, inducing a hardening of protein dynamics. The mechanism is opposite to that observed upon heating, i.e., the softening of the hydrogen bond network of water inducing a softer protein dynamics. The analysis of the intramolecular O-H stretching reveals that pressurizing lysozyme aqueous solution favors the development of low-density water from the protein surface to the bulk, contrasting to the compression of pure water leading to crystallization of high-density ice-VI.

Thermal denaturation of beta-lactoglobulin and stabilization mechanism by trehalose analyzed from Raman spectroscopy investigations

The thermal denaturation process of beta-lactoglobulin has been analyzed in the 20-100 degrees C temperature range by Raman spectroscopy experiments simultaneously performed in the region of amide modes (800-1800 cm(-1)) and in the low-frequency range (10-350 cm(-1)). The analysis of amide modes reveals a two-step thermal denaturation process in the investigated temperature range. The first step corresponds to the dissociation of dimers associated with an increase of flexibility of the tertiary structure. In the second step, large conformational changes are detected in the secondary structure and described as a loss of alpha-helix structures and a concomitant formation of beta-sheets. Raman investigations in the low-frequency range provide important information on the origin of the denaturation process through the analysis of the solvent dynamics and its coupling with that of the protein. The softening of the tetrahedral structure of water induces the dissociation of dimers and makes the tertiary structure softer, leading to the water penetration in the protein interior. The methodology based on Raman investigations of amide modes and in the low-frequency region was used to analyze the mechanism of beta-lactoglobulin thermostabilization by trehalose. The main effect of trehalose is determined to be related to its capabilities to distort the tetrahedral organization of water molecules.

Additional supra-self-assembly of human serum albumin under amyloid-like-forming solution conditions

Protein aggregation has a multitude of consequences ranging from affecting protein expression to its implication in different diseases. Of recent interest is the specific form of aggregation leading to the formation of amyloid fibrils, structures associated with diseases such as Alzheimer's disease. These fibrils can further associate in other more complex structures such as fibrillar gels, plaques, or spherulitic structures. In the present work, we describe the physical and structural properties of additional supraself-assembled structures of human serum albumin under solution conditions in which amyloid-like fibrils are formed. We have detected the formation of ordered aggregates of amyloid fibrils, i.e., spherulites which possess a radial arrangement of the fibrils around a disorganized protein core and sizes of several micrometers by means of polarized optical microscopy, laser confocal microscopy, and transmission electron microscopy. These spherulites are detected both in solution and embedded in an isotropic matrix of fibrillar gels. In this regard, we have also noted the formation of protein gels when the protein concentration and/or ionic strength exceds a threshold value (the gelation point) as observed by rheometry. Fibrillar gels are formed through intermolecular nonspecific association of amyloid fibrils at a pH far away from the isolectric point of the protein where protein molecules seem to display a "solid-like" behavior due to the existence of non-DLVO (Derjaguin-Landau-Verwey-Overbeck) intermolecular repulsive forces. As the solution ionic strength increases, a coarsening of this type of gel is observed by environmental scanning microscopy. In contrast, at pH close to the protein isoelectric point, particulate gels are formed due to a faster aggregation process, which does not allow substantial structural reorganization to enable the formation of ordered structures. This behavior also additionally corroborates that the existence of particulates might also be a generic property of all polypeptide chains as amyloid fibril formation under suitable conditions.

Multiscale characterization of individualized beta-lactoglobulin microgels formed upon heat treatment under narrow pH range conditions

Aqueous dispersions of demineralized beta-lactoglobulin (beta-lg) were held at 85 degrees C for 15 min at a constant protein concentration of 1 wt % in the pH range of 3.0-7.0. This led to denatured protein content ranging from 20% (pH 3.0) to 90% (pH 5.0). The protein aggregates formed were characterized as to their stability to sedimentation (turbidity), morphology, size, surface charge, ANS surface hydrophobicity, and content in accessible thiol groups. Additionally, the changes in secondary structures of the protein upon heating were followed by Fourier transform infrared spectroscopy (FTIR). Stable dispersions (no sedimentation for 10 min) of individualized beta-lg microgels were obtained at specific pH 4.6 and 5.8, corresponding to an aggregation yield of about 80%. The width of the pH region leading to these microgels was 0.3 pH unit below or above the two specific pH values. Microgels were characterized by a spherical shape and remarkably low polydispersity in size (<0.2). Their z-average hydrodynamic diameter determined by dynamic light scattering (DLS) was between 160 and 220 nm, and their zeta-potential was +30 or -40 mV, depending on the initial pH before heating. Microgels obtained at pH 4.6 displayed a lower binding capacity for ANS and a lower content of accessible thiol groups as compared to those obtained at pH 5.8. Both types of microgels might therefore differ in their internal and interfacial structures. Between pH 4.6 and 5.8, large sedimenting protein particulates were obtained, whereas soluble aggregates were formed at pH <4.6 or >5.8. Interestingly, DLS experiments showed that before heating, beta-lg was mainly present in an oligomeric state at pH 4.6 and 5.8. This result was confirmed by FTIR measurements indicating the stronger contribution of the 1616-1624 cm(-1) spectral band corresponding to intermolecular beta-sheets in the pH range of 4.0-6.0. Upon heating, FTIR spectroscopy revealed that individualized microgels were obtained under pH conditions where a balance between attractive forces arising from protein unfolding leading to the formation of intermolecular beta-sheets (1616-1624 cm(-1 )band) and the repulsive electrostatic forces due to the initial protein net charge was achieved.

Amyloid fibril-like structure underlies the aggregate structure across the pH range for beta-lactoglobulin

The protein beta-lactoglobulin aggregates into two apparently distinct forms under different conditions: amyloid fibrils at pH values away from the isoelectric point, and spherical aggregates near it. To understand this apparent dichotomy in behavior, we studied the internal structure of the spherical aggregates by employing a range of biophysical approaches. Fourier transform infrared studies show the aggregates have a high beta-sheet content that is distinct from the native beta-lactoglobulin structure. The structures also bind the amyloidophilic dye thioflavin-T, and wide-angle x-ray diffraction showed reflections corresponding to spacings typically observed for amyloid fibrils composed of beta-lactoglobulin. Combined with small-angle x-ray scattering data indicating the presence of one-dimensional linear aggregates at the molecular level, these findings indicate strongly that the aggregates contain amyloid-like substructure. Incubation of beta-lactoglobulin at pH values increasingly removed from the isoelectric point resulted in the increasing appearance of fibrillar species, rather than spherical species shown by electron microscopy. Taken together, these results suggest that amyloid-like beta-sheet structures underlie protein aggregation over a much broader range of conditions than previously believed. Furthermore, the results suggest that there is a continuum of beta-sheet structure of varying regularity underlying the aggregate morphology, from very regular amyloid fibrils at high charge to short stretches of amyloid-like fibrils that associate together randomly to form spherical particles at low net charge.