Microstructure and physico-chemical evaluation of nano-emulsion-based antimicrobial peptides embedded in bioactive packaging films

Recent approaches in the application of antimicrobial peptides in food preservation

Antimicrobial peptides (AMPs) are small peptides existing in nature as an important part of the innate immune system in various organisms. Notably, the AMPs exhibit inhibitory effects against a wide spectrum of pathogens, showcasing potential applications in different fields such as food, agriculture, medicine. This review explores the application of AMPs in the food industry, emphasizing their crucial role in enhancing the safety and shelf life of food and how they offer a viable substitute for chemical preservatives with their biocompatible and natural attributes. It provides an overview of the recent advancements, ranging from conventional approaches of using natural AMPs derived from bacteria or other sources to the biocomputational design and usage of synthetic AMPs for food preservation. Recent innovations such as structural modifications of AMPs to improve safety and suitability as food preservatives have been discussed. Furthermore, the active packaging and creative fabrication strategies such as nano-formulation, biopolymeric peptides and casting films, for optimizing the efficacy and stability of these peptides in food systems are summarized. The overall focus is on the spectrum of applications, with special attention to potential challenges in the usage of AMPs in the food industry and strategies for their mitigation.

Physical Properties of Cellulose Derivative-Based Edible Films Elaborated with Liposomes Encapsulating Grape Seed Tannins

Combined use of edible films (EF) with nanoencapsulation systems could be an effective alternative for improving the films' physical properties and maintaining bioactive compounds' stability. This research work focuses on the combined use of EF of cellulose-derived biopolymers enriched with liposomes that encapsulate grape seed tannins and on the subsequent evaluation of the physical properties and wettability. Tannin-containing liposomal suspensions (TLS) showed 570.8 ± 6.0 nm particle size and 99% encapsulation efficiency. In vitro studies showed that the release of tannins from liposomes was slower than that of free tannins, reaching a maximum release of catechin of 0.13 ± 0.01%, epicatechin of 0.57 ± 0.01%, and gallic acid of 3.90 ± 0.001% over a 144 h period. Adding liposomes to biopolymer matrices resulted in significant decrease (p < 0.05) of density, surface tension, tensile strength, elongation percentage, and elastic modulus in comparison to the control, obtaining films with greater flexibility and lower breaking strength. Incorporating TLS into EF formulations resulted in partially wetting the hydrophobic surface, reducing adhesion and cohesion compared to EF without liposomes. Results indicate that the presence of liposomes improves films' physical and wettability properties, causing them to extend and not contract when applied to hydrophobic food surfaces.

Development of Functional Composite Edible Films or Coatings for Fruits Preservation with Addition of Pomace Oil-Based Nanoemulsion for Enhanced Barrier Properties and Caffeine for Enhanced Antioxidant Activity

The aim of this study was to develop functional composite edible films or coatings for fruit preservation by the addition of bioactive components in combinations that have not yet been thoroughly studied, according to the relevant literature. Edible films were initially composed of (i) chitosan (CH), cellulose nanocrystals (CNC) and beta-cyclodextrin (CD) (50%-37.5%-12.5% ratio), and (ii) hydroxypropyl methylcellulose (HPMC), cellulose nanocrystals (CNC) and beta-cyclodextrin (CD) (50%-37.5%-12.5% ratio). The bioactive components incorporated (5, 10 and 15% v/v) were as follows: (i) pomace oil-based nanoemulsion (NE) aiming to enhance barrier properties, and (ii) caffeine (C), aiming to enhance the antioxidant activity of films, respectively. Indeed, NE addition led to very high barrier properties (low oxygen and water vapor permeability), increased flexibility and reduced color. Furthermore, the contribution of these coatings to fresh strawberries' preservation under cold storage was investigated, with very promising results concerning weight loss, color difference, and preservation of fruit moisture and quantity of O2 and CO2 inside the packages. Additionally, C addition led to very high antioxidant activity, reduced color and improved barrier properties. Finally, the contribution of these coatings to avocado's preservation under cold storage was investigated, with very encouraging results for color difference, hardness and peroxide value of the fruit samples.

Liposomal and Liposomes-Film Systems as Carriers for Bioactives from Paeonia tenuifolia L. Petals: Physicochemical Characterization and Biological Potential

Paeonia tenuifolia L. (steppe peony) petal extract was proficiently encapsulated into liposomes and biopolymer films in the current work, both times utilizing a single-step procedure. The encapsulation efficiency, size of the particles, and index of polydispersity (PDI), as well as the ζ potential of the obtained liposomes were determined, whereas in the case of films, the test included moisture content and mechanical property assessment. Fourier transform infrared spectroscopy (FT-IR) was used to evaluate the chemical composition and existence of numerous interactions in the systems. All the obtained encapsulates were subjected to antibacterial, antifungal and antibiofilm activity testing of the pathogens associated with human skin. The results indicated that the liposomes prepared using Phospholipon had the highest encapsulation efficiency (72.04%), making them the most favorable ones in the release study as well. The biological assays also revealed that Phospholipon was the most beneficial phospholipid mixture for the preparation of liposomes, whereas the film containing these liposomes did not have the ability to inhibit pathogen growth, making the double encapsulation of P. tenuifolia L. petal extract needless. These findings may be a first step toward the potential use of steppe peony extract-loaded films and liposomes in pharmaceutical and cosmetical industries.

Polysaccharide-Based Edible Films/Coatings for the Preservation of Meat and Fish Products: Emphasis on Incorporation of Lipid-Based Nanosystems Loaded with Bioactive Compounds

The high water and nutritional contents of meat and fish products make them susceptible to spoilage. Thus, one of the most important challenges faced by the meat industry is extending the shelf life of meat and fish products. In recent years, increasing concerns associated with synthetic compounds on health have limited their application in food formulations. Thus, there is a great need for natural bioactive compounds. Direct use of these compounds in the food industry has faced different obstacles due to their hydrophobic nature, high volatility, and sensitivity to processing and environmental conditions. Nanotechnology is a promising method for overcoming these challenges. Thus, this article aims to review the recent knowledge about the effect of biopolymer-based edible films or coatings on the shelf life of meat and fish products. This study begins by discussing the effect of biopolymer (pectin, alginate, and chitosan) based edible films or coatings on the oxidation stability and microbial growth of meat products. This is followed by an overview of the nano-encapsulation systems (nano-emulsions and nanoliposomes) and the effect of edible films or coatings incorporated with nanosystems on the shelf life of meat and fish products.

Development of a multifunctional food packaging for meat products by incorporating carboxylated cellulose nanocrystal and beetroot extract into sodium alginate films

Consumers' pursuit for safe meat products is challenging to develop smart food packaging with proper mechanical properties and multifunctional properties. Therefore, this work attempted to introduce carboxylated cellulose nanocrystal (C-CNC) and beetroot extract (BTE) into sodium alginate (SA) matrix films to enhance their mechanical properties and endow them with antioxidant properties and pH-responsive capacity. The rheological results showed the C-CNC and BTE were consistently dispersed in the SA matrix. The incorporation of C-CNC made the surface and cross-section of the films rough but still dense, thus significantly improving the mechanical properties of the films. The integration of BTE provided antioxidant properties and pH responsiveness without significantly changing the thermal stability of the film. The highest tensile strength (55.74 ± 4.52 MPa) and strongest antioxidant capacities were achieved for the SA-based film with BTE and 10 wt% C-CNC. Additionally, the films possessed higher UV-light barrier properties after incorporating BTE and C-CNC. More notably, the pH-responsive films discolored when TVB-N value exceeded 18.0 mg/100 g during storage of pork at 4 °C and 20 °C, respectively. Therefore, the SA-based film with enhanced mechanical and functional properties has a high potential for quality detection in smart food packaging applications.

Preparation and Application of pH-Sensitive Film Containing Anthocyanins Extracted from Lycium ruthenicum Murr

A new pH-sensitive film was developed using Artemisia sphaerocephala Krasch. gum (ASKG), soybean protein isolate (SPI), and natural anthocyanin extracted from Lycium ruthenicum Murr. The film was prepared by adsorbing anthocyanins dissolved in an acidified alcohol solution on a solid matrix. ASKG and SPI were used as the solid matrix for the immobilization of the Lycium ruthenicum Murr. anthocyanin extract, which was absorbed into the film as a natural dye using the facile-dip method. Regarding the mechanical properties of the pH-sensitive film, the tensile strength (TS) values increased approximately 2-5-fold, but the elongation at break (EB) values decreased significantly by about 60% to 95%. With the increase in anthocyanin concentration, the oxygen permeability (OP) values first decreased by about 85%, and then increased by about 364%. The water vapor permeability (WVP) values increased by about 63%, and then decreased by about 20%. Colorimetric analysis of the films revealed variations in color at different pH values (pH 2.0-10.0). Fourier-transform infrared (FT-IR) spectra and XRD patterns indicated compatibility among ASKG, SPI, and anthocyanin extracts. In addition, an application test was conducted to establish a correlation between film color change and carp meat spoilage. At storage temperatures of 25 °C and 4 °C, when the meat was totally spoiled, the TVB-N values reached 99.80 ± 2.53 mg/100 g and 58.75 ± 1.49 mg/100 g, and the film's color changed from red to light brown and from red to yellowish green, respectively. Therefore, this pH-sensitive film could be used as an indicator to monitor the freshness of meat during storage.

Fish gelatin films incorporated with cinnamaldehyde and its sulfobutyl ether-β-cyclodextrin inclusion complex and their application in fish preservation

For food preservation, the packaging film needs to have higher antibacterial activity in initial phase and keep longer activity. In this study, cinnamaldehyde (CA) and its sulfobutyl ether-β-cyclodextrin inclusion complex (CA/S) were used to fabricate fish gelatin antibacterial composite films. The addition enhanced the elongation at break and light barrier property of the films. Film forming solution incorporated with CA and CA/S presented the most excellent inhibition ratio against Pseudomonas aeruginosa, which was 98.43 ± 1.11% in initial period and still 82.97 ± 4.55% at 72 h. Further, the packaging solution of gelatin combined CA and CA/S effectively inhibited the growth of microorganisms during preservation of grass carp slices. Especially, the total volatile salt-based nitrogen (TVB-N) did not exceed 10 mg/100 g at the end of storage, indicating that the active coating could obviously extend the shelf life of fish muscle. This work provided a promising food packaging system with antimicrobial and environmentally friendly.

Application of Nanotechnology to Improve the Performance of Biodegradable Biopolymer-Based Packaging Materials

There is great interest in developing biodegradable biopolymer-based packaging materials whose functional performance is enhanced by incorporating active compounds into them, such as light blockers, plasticizers, crosslinkers, diffusion blockers, antimicrobials, antioxidants, and sensors. However, many of these compounds are volatile, chemically unstable, water-insoluble, matrix incompatible, or have adverse effects on film properties, which makes them difficult to directly incorporate into the packaging materials. These challenges can often be overcome by encapsulating the active compounds within food-grade nanoparticles, which are then introduced into the packaging materials. The presence of these nanoencapsulated active compounds in biopolymer-based coatings or films can greatly improve their functional performance. For example, anthocyanins can be used as light-blockers to retard oxidation reactions, or they can be used as pH/gas/temperature sensors to produce smart indicators to monitor the freshness of packaged foods. Encapsulated botanical extracts (like essential oils) can be used to increase the shelf life of foods due to their antimicrobial and antioxidant activities. The resistance of packaging materials to external factors can be improved by incorporating plasticizers (glycerol, sorbitol), crosslinkers (glutaraldehyde, tannic acid), and fillers (nanoparticles or nanofibers). Nanoenabled delivery systems can also be designed to control the release of active ingredients (such as antimicrobials or antioxidants) into the packaged food over time, which may extend their efficacy. This article reviews the different kinds of nanocarriers available for loading active compounds into these types of packaging materials and then discusses their impact on the optical, mechanical, thermal, barrier, antioxidant, and antimicrobial properties of the packaging materials. Furthermore, it highlights the different kinds of bioactive compounds that can be incorporated into biopolymer-based packaging.

Application of Encapsulation Technology in Edible Films: Carrier of Bioactive Compounds

Nutraceuticals, functional foods, immunity boosters, microcapsules, nanoemulsions, edible packaging, and safe food are the new progressive terms, adopted to describe the food industry. Also, the rising awareness among the consumers regarding these has created an opportunity for the food manufacturers and scientists worldwide to use food as a delivery vehicle. Packaging performs a very imminent role in the food supply chain as well as it is a consequential part of the process of food manufacturing. Edible packaging is a swiftly emerging art of science in which edible biopolymers like lipids, polysaccharides, proteins, resins, etc. and other consumable constituents extracted from various non-conventional sources like microorganisms are used alone or imbibed together. These edible packaging are indispensable and are meant to be consumed with the food. This shift in paradigm from traditional food packaging to edible, environment friendly, delivery vehicles for bioactive compounds have opened new avenues for the packaging industry. Bioactive compounds imbibed in food systems are gradually degenerated, or may change their properties due to internal or external factors like oxidation reactions, or they may react with each other thus reducing their bioavailability and ultimately may result in unacceptable color or flavor. A combination of novel edible food-packaging material and innovative technologies can serve as an excellent medium to control the bioavailability of these compounds in food matrices. One promising technology for overcoming the aforesaid problems is encapsulation. It can be used as a method for entrapment of desirable flavors, probiotics, or other additives in order to apprehend the impediments of the conventional edible packaging. This review explains the concept of encapsulation by exploring various encapsulating materials and their potential role in augmenting the performance of edible coatings/films. The techniques, characteristics, applications, scope, and thrust areas for research in encapsulation are discussed in detail with focus on development of sustainable edible packaging.

Advances in biopolymeric active films incorporated with emulsified lipophilic compounds: a review

The attention towards active films has increased due to consumer demand for high-quality foods without chemical additives. Active biopolymer-based films have shown great potential for active films by impacting food safety, acting as the carriers of various natural antioxidant and antimicrobial compounds, and decreasing environmental pollution from petrol-derived packaging materials. However, there is a wide range of challenges concerning the different characteristics of biopolymers and plasticizers, often hygroscopic/hydrophilic, compared to numerous lipophilic bioactive compounds. Therefore, recent studies have focused on applying oil-in-water emulsion-based systems to enhance the lipophilic bioactive compounds' dispersibility into the film matrix, improving their performance. It is worth emphasizing that resulting complex systems give rise to new challenges such as (i) dispersion technology of the bioactive compounds with minimum adverse effects on its bioactivities, (ii) interactions between different components of the active films, giving rise to new physicochemical properties, and (iii) the change of the diffusion properties of bioactive compounds into the active films, resulting in different release properties. These challenges are profound and critically discussed in this review, as well as the encapsulation techniques employed in preparing emulsions loaded with lipophilic bioactive compounds for the active film development. An outlook of future directions in the research, development, and application of these active films are given.

Edible films and coatings: properties for the selection of the components, evolution through composites and nanomaterials, and safety issues

Edible films and coatings, despite their practical applications, have only entered the food industry in the last decade. Their main functions are to protect the food products from mechanical damage and from physical, chemical and microbiological deteriorative changes. The ingredients used for their formation are polysaccharides, proteins and lipids, in individual or combined formulations. The edible films and coatings have already been applied on various food products, such as fruits, vegetables, meat products, seafood products, cheese, baked products and deep fat fried products. The techniques for their application on foods are of particular interest. Nowadays, composite edible films and coatings are also being studied, based on combinations of the properties of individual components. In addition to conventional materials, new ones, such as nanomaterials, are being investigated, aiming to enhance the resulting properties. However, before the incorporation of new materials to films and coatings, they must be thoroughly checked according to the legislation, to assure their lawful use. This review covers the recent developments on the edible films and coatings area in terms of the contribution of novel constituting materials to the improvement of their properties.

Recent developments in antimicrobial and antifouling coatings to reduce or prevent contamination and cross-contamination of food contact surfaces by bacteria

Illness as the result of ingesting bacterially contaminated foodstuffs represents a significant annual loss of human quality of life and economic impact globally. Significant research investment has recently been made in developing new materials that can be used to construct food contacting tools and surfaces that might minimize the risk of cross-contamination of bacteria from one food item to another. This is done to mitigate the spread of bacterial contamination and resultant foodborne illness. Internet-based literature search tools such as Web of Science, Google Scholar, and Scopus were utilized to investigate publishing trends within the last 10 years related to the development of antimicrobial and antifouling surfaces with potential use in food processing applications. Technologies investigated were categorized into four major groups: antimicrobial agent-releasing coatings, contact-based antimicrobial coatings, superhydrophobic antifouling coatings, and repulsion-based antifouling coatings. The advantages for each group and technical challenges remaining before wide-scale implementation were compared. A diverse array of emerging antimicrobial and antifouling technologies were identified, designed to suit a wide range of food contact applications. Although each poses distinct and promising advantages, significant further research investment will likely be required to reliably produce effective materials economically and safely enough to equip large-scale operations such as farms, food processing facilities, and kitchens.

Development of active packaging films based on chitosan and nano-encapsulated luteolin

Luteolin is a flavone with potent antioxidant and antimicrobial activities. In this study, luteolin was encapsulated in oil-in-water nanoemulsions that were emulsified by glycerol monooleate and Tween 20. Results showed 68 mg luteolin-loaded nanoemulsions had the highest stability (zeta potential of -39.8 mV) and encapsulation efficiency (89.52%). Then, active packaging films were developed by incorporating free or nano-encapsulated luteolin into chitosan-based matrix. The microstructure, physical and functional properties of CS film containing free luteolin (CS-LL) or nano-encapsulated luteolin (CS-LLNEs) were compared. Different from CS film, CS-LL and CS-LLNEs films had compact inner microstructure and strengthened intermolecular interactions. Moreover, CS-LLNEs film was more homogenous and compact than CS-LL film. As a result, CS-LLNEs film presented higher water vapor and oxygen barrier abilities and mechanical properties in comparison with CS-LL film. In addition, CS-LLNEs film showed slower release rate of luteolin in 95% ethanol (fatty food stimulant) as compared with CS-LL film. The controlled release of luteolin from film matrix could guarantee CS-LLNEs film to exert antioxidant activity up to 10 days. Our results suggest CS-LLNEs film can be developed as an emerging active packaging material that has potential applications in food industry.

Green Design of Novel Starch-Based Packaging Materials Sustaining Human and Environmental Health

A critical overview of current approaches to the development of starch-containing packaging, integrating the principles of green chemistry (GC), green technology (GT) and green nanotechnology (GN) with those of green packaging (GP) to produce materials important for both us and the planet is given. First, as a relationship between GP and GC, the benefits of natural bioactive compounds are analyzed and the state-of-the-art is updated in terms of the starch packaging incorporating green chemicals that normally help us to maintain health, are environmentally friendly and are obtained via GC. Newer approaches are identified, such as the incorporation of vitamins or minerals into films and coatings. Second, the relationship between GP and GT is assessed by analyzing the influence on starch films of green physical treatments such as UV, electron beam or gamma irradiation, and plasma; emerging research areas are proposed, such as the use of cold atmospheric plasma for the production of films. Thirdly, the approaches on how GN can be used successfully to improve the mechanical properties and bioactivity of packaging are summarized; current trends are identified, such as a green synthesis of bionanocomposites containing phytosynthesized metal nanoparticles. Last but not least, bioinspiration ideas for the design of the future green packaging containing starch are presented.

Nanoencapsulation of Promising Bioactive Compounds to Improve Their Absorption, Stability, Functionality and the Appearance of the Final Food Products

The design of functional foods has grown recently as an answer to rising consumers' concerns and demands for natural, nutritional and healthy food products. Nanoencapsulation is a technique based on enclosing a bioactive compound (BAC) in liquid, solid or gaseous states within a matrix or inert material for preserving the coated substance (food or flavor molecules/ingredients). Nanoencapsulation can improve stability of BACs, improving the regulation of their release at physiologically active sites. Regarding materials for food and nutraceutical applications, the most used are carbohydrate-, protein- or lipid-based alternatives such as chitosan, peptide-chitosan and β-lactoglobulin nanoparticles (NPs) or emulsion biopolymer complexes. On the other hand, the main BACs used in foods for health promoting, including antioxidants, antimicrobials, vitamins, probiotics and prebiotics and others (minerals, enzymes and flavoring compounds). Nanotechnology can also play notable role in the development of programmable food, an original futuristic concept promising the consumers to obtain high quality food of desired nutritive and sensory characteristics.

Progresses in Food Packaging, Food Quality, and Safety-Controlled-Release Antioxidant and/or Antimicrobial Packaging

Food packaging is designed to protect foods, to provide required information about the food, and to make food handling convenient for distribution to consumers. Packaging has a crucial role in the process of food quality, safety, and shelf-life extension. Possible interactions between food and packaging are important in what is concerning food quality and safety. This review tries to offer a picture of the most important types of active packaging emphasizing the controlled/target release antimicrobial and/or antioxidant packaging including system design, different methods of polymer matrix modification, and processing. The testing methods for the appreciation of the performance of active food packaging, as well as mechanisms and kinetics implied in active compounds release, are summarized. During the last years, many fast advancements in packaging technology appeared, including intelligent or smart packaging (IOSP), (i.e., time-temperature indicators (TTIs), gas indicators, radiofrequency identification (RFID), and others). Legislation is also discussed.

Fortification of edible films with bioactive agents: a review of their formation, properties, and application in food preservation

Biodegradable films constructed from food ingredients are being developed for food coating and packaging applications to create more sustainable and environmentally friendly alternatives to plastics and other synthetic film-forming materials. In particular, there is a focus on the creation of active packaging materials from natural ingredients, especially plant-based ones. The film matrix is typically constructed from film-forming food components, such as proteins, polysaccharides and lipids. These matrices can be fortified with active ingredients, such as antioxidants and antimicrobials, so as to enhance their functional properties. Edible active films must be carefully designed to have the required optical, mechanical, barrier, and preservative properties needed for commercial applications. This review focuses on the fabrication, properties, and functional performance of edible films constructed from natural active ingredients. It provides an overview of the type of active ingredients that can be used, how they interact with the film matrix, how they migrate through the films, and how they are released. It also discusses the potential application of these active films for food preservation. Finally, future trends are highlighted and areas where further research are required are discussed.

Bacteriocin nanoconjugates: boon to medical and food industry

Resistance to antibiotics is an ongoing problem in the biomedical industry. Developing active, alternative drug therapies would reduce our reliance on antibiotics that induce resistance in micro-organisms. To date, bacteriocins and antimicrobial peptides have shown a positive outcome as antibiotic substitutes and synergists apart from phage therapy, antibodies and probiotics. Bacteriocins are proteinaceous antimicrobial peptides synthesized by lactic acid bacteria extensively used as bio-preservatives and alternative to traditional antibiotics to overcome the problem of drug-resistant pathogens. Nonetheless, the use of bacteriocins has several limitations such as limited antimicrobial spectrum, requiring high dose, sensitivity to proteolytic enzymes, etc. Nanoparticles are one of the promising area of research explored to improve antimicrobial spectrum of bacteriocins. This review therefore highlights the recent developments and research pertaining to use of nanoparticles and bacteriocin conjugates to tackle the resistance crisis as well as its applications in food industry.

Development of nanochitosan-based active packaging films containing free and nanoliposome caraway (Carum carvi. L) seed extract

The biocompatible active films were prepared based on nanochitosan (NCh) containing free and nanoliposome caraway seed extract (NLCE). The produced films were characterized by physico-mechanical, barrier, structural, color, antimicrobial, and antioxidant properties. The average particle size of NLCE was 78-122 nm, and the encapsulation efficiency (EE%) was obtained 49.87%-73.07%. Nanoliposomes with the lowest size and the highest encapsulation efficiency were merged with the film samples. NCh/CE3% and NCh/NLCE3% films had higher stability compared to other films and showed the highest antimicrobial activity (3.68 mm inhibition) and radical quenching capacity (51%), respectively. Likewise, biodegradable active films containing nanoliposomes had lower antimicrobial potential and higher antioxidant capacity than films containing free extract with similar concentration. The Fourier-transform infrared spectroscopy (FTIR) results revealed new interactions between NCh and nanoliposomes. Scanning electron microscopy (SEM) investigation also exhibited a homogenous structure and nearly smooth surface morphology with a good dispersion for NCh/NLCE films. Despite an increase in yellowness (b value) and a decrease in whiteness (L value) index, the incorporation of nanoliposomes within the NCh films improved the mechanical flexibility (from 10.2% to 15.05%) and reduced water vapor permeability (WVP) (from 14.2 × 10-12 g/m·s·Pa to 11.9 × 10-12 g/m·s·Pa). Today, due to the growing trend toward natural ingredients, the use of nanoparticles derived from plant derivatives has expanded in the food industry owing to their antimicrobial and antioxidant properties.

Combining natural antimicrobials and nanotechnology for disinfecting food surfaces and control microbial biofilm formation

The elimination of microbial surface contaminants is one of the most important steps in Good Manufacturing Practices in order to maintain food safety. This is usually achieved by detergents and chemical sanitizers, although an increased demand exists for the use of natural products for disinfection purposes. Several natural substances present antibacterial activity against the main foodborne pathogens, demonstrating great potential for use in the food industry. Some difficulties such as high volatility, residual taste and/or degradation by exposure to harsh processing conditions have been reported. Nanoparticle encapsulation appears as a strategy to protect bioactive compounds, maintaining their antimicrobial activity and providing controlled release as well. This article presents the potential of natural antimicrobials and their combination with nanotechnological strategies as an alternative for food surface disinfection and prevent microbial biofilm formation.

Bacterial anti-microbial peptides and nano-sized drug delivery systems: The state of the art toward improved bacteriocins

Antimicrobial peptides (AMP) are molecules consisting of 12-100 amino acids synthesized by certain microbes and released extracellularly to inhibit the growth of other microbes. Among the AMP molecules, bacteriocins are produced by both gram-positive and gram-negative bacterial species and are used to kill or inhibit other prokaryotes in the environment. Due to their broad-spectrum antimicrobial activity, some bacteriocins have the potential of becoming the next generation of antibiotics for use in the crisis of multi antibiotic-resistant bacteria. Recently, bacteriocins have even been used to treat cancer. However, bacteriocins present a few drawbacks, such as sensitivity to proteases, immunogenicity issues, and the development of bacteriocin resistance by pathogenic bacteria. In this regard, nanoscale drug delivery systems (Nano-DDS) have led to the expectation that they will eventually improve the treatment of many diseases by addressing these limitations and improving bacteriocin pharmacokinetics and pharmacodynamics. Thus, combining bacteriocins with nano-DDS may be useful in overcoming these drawbacks and thereby reveal the full potential of bacteriocins. In this review article, we highlight the importance of tailoring nano-DDS to address bacteriocin limitations, the successes and failures of this technology thus far, the challenges that this technology still has to overcome before reaching the market, and future perspectives. Therefore, the purpose of this review is to highlight, categorize, compare and contrast the different nano-DDS described in the literature so far, and compare their effectiveness in order to improve the next generation of bacteriocin nano-sized drug delivery systems (Nano-DDS).

Development of novel active packaging films based on whey protein isolate incorporated with chitosan nanofiber and nano-formulated cinnamon oil

Active packaging is designed to extend products shelf life by incorporating active components with biological properties in its structure. The main goal of this research was to develop a biodegradable whey protein isolate (WPI)-based film, incorporated with chitosan nanofiber (CSNF) and cinnamon essential oil (CiEO) (both emulsified and Nanostructured lipid carriers (NLC) form). Then, the physicochemical properties of developed bio-nanocomposite were fully characterized. Both water solubility and the water vapor permeability of WPI film decreased significantly (p < 0.05) by incorporating the CSNF into film structure. The good complexation between WPI and CSNF was confirmed by FTIR. Microstructure revealed that the fiber networks were well distributed throughout the films while the morphological heterogeneity and contributed to the reduction of the tensile strength were evident after addition of CiEO. These obtained results from SEM to be quite in accordance with FT-IR findings that confirmed the incorporation of NLCs into bio-nanocomposite structure have been through physical interactions. The film barrier properties to ultraviolet light were increased by adding all of nano-reinforcements. Moreover, the antibacterial activity of resulting films was enhanced by adding CiEO, especially NLC form. This study introduces a novel ecofriendly bio-nano composite in packaging industries for the shelf life extension of different perishable foods.

Humectability and physical properties of hydroxypropyl methylcellulose coatings with liposome-cellulose nanofibers: Food application

The objective of this study was to investigate the physical, rheological and humectability properties of edible coating forming suspensions (ECS) based on hydroxypropyl methylcellulose (HPMC) containing: liposomes that encapsulate rutin, glycerol and cellulose nanofibers on sliced surfaces of almonds and chocolate. On average, liposomes measured between 110.6 ± 10.0 nm and were characterized as stable and homogeneous suspensions. Adding these liposomes to the edible coatings produced significant changes (p< 0.05) in the density and surface tension, which favor the final appearance of the coating. The presence of liposomes increased the apparent viscosity of the ECS, showing a purely viscous and fluid behavior with a good fit (R² = 0.9996) with the Power Law model. The presence of liposomes and cellulose nanofibers decreased the value of the cohesive energy of the ECS. The studied ECS partially hydrate the surfaces of almond and chocolate as they showed contact angles under 90°.

Effect of various additives on the properties of the films and coatings derived from hydroxypropyl methylcellulose-A review

Edible films and coating materials are commonly used as appropriate packaging materials to extend the shelf life of fresh food. Due to all their properties, edible film and coating materials have been received much attention. They are biodegradable, edible, and good barrier against environmental parameters; thereby, they could carry and deliver food additives protecting food quality. Hydroxypropyl methylcellulose (HPMC), a cellulose derivatives, can act as an excellent film-forming agent for coating food produces. The aim of this study was to provide an overview of the HPMC properties and investigate the effects of various additives on its film-forming properties, such as rheological behavior, water vapor, and gas permeability, as well as mechanical, optical, antioxidant, and antimicrobial properties, with a focus on the recent progress and outputs, which has been recently published. Hydroxypropyl methylcellulose is prone to be commonly used as an advanced film-forming and coating materials for the sake of well miscibility with a wide range of organic and inorganic materials. However, this polymer requires further improvements regarding moisture susceptibility and thermal properties.

Production of Bioactive Peptides from Lactic Acid Bacteria: A Sustainable Approach for Healthier Foods

Traditional fermented foods where lactic acid bacteria (LAB) are present have been associated with beneficial effects on human health, and some of those benefits are related to protein-derived products. Peptides produced by LAB have attracted the interest of food industries because of their diverse applications. These peptides include ribosomally produced (bacteriocins) and protein hydrolysates by-products (bioactive peptides), which can participate as natural preservatives and nutraceuticals, respectively. It is essential to understand the biochemical pathways and the effect of growth conditions for the production of bioactive peptides and bacteriocins by LAB, in order to suggest strategies for optimization. LAB is an important food-grade expression system that can be used in the simultaneous production of peptide-based products for the food, animal, cosmetic, and pharmaceutical industries. This review describes the multifunctional proteinaceous compounds generated by LAB metabolism and discusses a strategy to use a single-step production process, using an alternative protein-based media. This strategy will provide economic advantages in fermentation processes and will also provide an environmental alternative to industrial waste valorization. New technologies that can be used to improve production and bioactivity of LAB-derived peptides are also analyzed.

Nanotechnology interventions in aquaculture and seafood preservation

The inclusion of nanotechnologies in aquaculture and seafood preservation confronts a new edge that deserves attention in the recent trends of global food sector. Nanotechnology, being a novel and innovative approach has paved way to open up new perspective for the analysis of biomolecules, targeted drug delivery, protein or cells, clinical diagnosis, development of non-viral vectors for gene therapy, as transport vehicle for DNA, disease therapeutics etc. The current and potential use of nanotechnology would show the way to progression of smart and high performing fish. The comparative evaluation of extremely sophisticated nanotechnology with conventional process engineering proposes new prospectus in technological developments for superior water and wastewater technology processes. Nanoparticles have comprehensive advantages for management of drugs as liberation of vaccines and therefore hold the assurance for civilized protection of farmed fish against disease-causing pathogens. This review article explores the present concerns of food security, climate change as well as sustainability that are explored by the researchers in the area of nanotechnology, development of marine produce, along with its preservation and aquaculture.