Formation kinetics and rheology of alginate fluid gels produced by in-situ calcium release

Coating seeds with biocontrol bacteria-loaded sodium alginate/pectin hydrogel enhances the survival of bacteria and control efficacy against soil-borne vegetable diseases

Microbial seed coatings serve as effective, labor-saving, and ecofriendly means of controlling soil-borne plant diseases. However, the survival of microbial agents on seed surfaces and in the rhizosphere remains a crucial challenge. In this work, we embedded a biocontrol bacteria (Bacillus subtilis ZF71) in sodium alginate (SA)/pectin (PC) hydrogel as a seed coating agent to control Fusarium root rot in cucumber. The formula of SA/PC hydrogel was optimized with the highest coating uniformity of 90 % in cucumber seeds. SA/PC hydrogel was characterized using rheological, gel content, and water content tests, thermal gravimetric analysis, and Fourier transform infrared spectroscopy. Bacillus subtilis ZF71 within the SA/PC hydrogel network formed a biofilm-like structure with a high viable cell content (8.30 log CFU/seed). After 37 days of storage, there was still a high number of Bacillus subtilis ZF71 cells (7.23 log CFU/seed) surviving on the surface of cucumber seeds. Pot experiments revealed a higher control efficiency against Fusarium root rot in ZF71-SA/PC cucumber seeds (53.26 %) compared with roots irrigated with a ZF71 suspension. Overall, this study introduced a promising microbial seed coating strategy based on biofilm formation that improved performance against soil-borne plant diseases.

Simultaneous viscoelasticity and sprayability in antimicrobial acetic acid-alginate fluid gels

Acetic acid is a promising alternative to antibiotics for topical applications, particularly burn wounds, however its site specificity and retention are impaired by poor material properties. In this study, acetic acid was investigated as both the gelling agent and antimicrobial active in alginate fluid gels. The formed microstructure was found to be directly dependent on acetic acid concentration, leading to highly tuneable material properties. At clinically relevant concentrations of 2.5-5 % acetic acid, the fluid gels were elastically dominated at rest, with viscosities up to 7 orders of magnitude greater than acetic acid alone. These material properties imparted long term surface retention and microparticle barrier function, not seen with either acetic acid or alginate solutions. Most notably, sprayability was enhanced simultaneously with the increased viscosity and elasticity due to the introduction of a discretised microstructure, leading to a remarkable tenfold increase in spray coverage. Formulation was found not to inhibit antimicrobial activity, despite the less acidic pH, with common burn wound pathogens Staphylococcus aureus and Pseudomonas aeruginosa being equally susceptible to the fluid gels as to acetic acid solutions.

Study on Quality Changes of Kelp Gel Edible Granules during Storage

The kelp gel edible granules developed utilizing the gel properties of alginate are prone to quality deterioration if improperly stored during the storage process. This study comprehensively investigated the quality changes of kelp gel edible granules stored at 4 °C and 25 °C by evaluating indicators such as total bacterial count, coliform bacteria, pH, relaxation time, color difference, appearance, texture characteristics, gel strength, and sensory scoring. The results showed that during the storage at 4 °C, the total bacterial count remained within the national standard range, the hardness and chewiness increased, the gel strength first increased and then decreased, the partial exudation of the bound water in the product occurred, and the sensory score slightly decreased, with an overall minor change in quality. During the storage at 25 °C, significant quality changes were observed, with the total bacterial count exceeding the national standard on the 20th day; additionally, the hardness, chewiness, and gel strength all initially increased and then decreased, both the bound water and the restrained water in the product exuded, the moisture stability decreased, and the sensory score significantly decreased between 16 to 20 days. The spoilage of the product was characterized by a significant water loss, reduction in volume, color change from bright green to dark yellow-brown, and a distinct smell of decaying algae. No coliform bacteria was detected in all products during the storage period. In summary, the shelf life endpoint of the product stored at 25 °C is 16 days, and the shelf life of the product stored at 4 °C is greater than 20 days. Storage at 4 °C can better maintain product quality, extend the shelf life, and effectively maintain the overall color of the product.

Gellan Gum as a Unique Microbial Polysaccharide: Its Characteristics, Synthesis, and Current Application Trends

Gellan gum (GG) is a linear, negatively charged exopolysaccharide that is biodegradable and non-toxic. When metallic ions are present, a hard and transparent gel is produced, which remains stable at a low pH. It exhibits high water solubility, can be easily bio-fabricated, demonstrates excellent film/hydrogel formation, is biodegradable, and shows biocompatibility. These characteristics render GG a suitable option for use in food, biomedical, and cosmetic fields. Thus, this review paper offers a concise summary of microbial polysaccharides. Moreover, an in-depth investigation of trends in different facets of GG, such as biosynthesis, chemical composition, and physical and chemical properties, is emphasized. In addition, this paper highlights the process of extracting and purifying GG. Furthermore, an in-depth discussion of the advantages and disadvantages of GG concerning other polysaccharides is presented. Moreover, the utilization of GG across different industries, such as food, medicine, pharmaceuticals, cosmetics, etc., is thoroughly examined and will greatly benefit individuals involved in this field who are seeking fresh opportunities for innovative projects in the future.

Granular Hemostatic Composite of Alginate, Calcium, and Zinc for Rapid and Effective Management of Post-Traumatic Hemorrhage

Post-traumatic hemorrhage, which can result from accidents or battlefield injuries, is a significant global concern due to the high prehospital mortality rate. Substantial efforts have been made to develop hemostatic agents that can effectively reduce hemorrhage in the immediate aftermath of a traumatic event. The present study investigated the potential efficacy of Ca2+ and Zn2+ supplemented sodium alginate-based dry hemostatic particles (SA-CZ DHP) to manage excessive blood loss or post-traumatic hemorrhage. SA-CZ DHP were developed, followed by their physical and biochemical characterization, cytocompatibility and hemocompatibility testing, and critical evaluation of the hemostatic potential in vitro and in vivo. The safe SA-CZ DHP showed high absorption and accelerated blood clotting kinetics with reduced coagulation time (≈70%, p < 0.0001) in whole human blood, observed with insignificant hemolysis and uninterrupted RBC morphology. SA-CZ DHP significantly reduced the mean blood loss (≈90% in SD rats tail incision), and bleeding time (≈60% in BALB/c mice tail incision) was at par with commercially available Celox hemostatic granules. In conclusion, the biocompatible SA-CZ DHP exhibited rapid and effective management of excessive blood loss. It is also pertinent to note that the developed formulation could be a cost-effective alternative to its commercial counterparts.

Ionically annealed zwitterionic microgels for bioprinting of cartilaginous constructs

Foreign body response (FBR) is a pervasive problem for biomaterials used in tissue engineering. Zwitterionic hydrogels have emerged as an effective solution to this problem, due to their ultra-low fouling properties, which enable them to effectively inhibit FBRin vivo. However, no versatile zwitterionic bioink that allows for high resolution extrusion bioprinting of tissue implants has thus far been reported. In this work, we introduce a simple, novel method for producing zwitterionic microgel bioink, using alginate methacrylate (AlgMA) as crosslinker and mechanical fragmentation as a microgel fabrication method. Photocrosslinked hydrogels made of zwitterionic carboxybetaine acrylamide (CBAA) and sulfobetaine methacrylate (SBMA) are mechanically fragmented through meshes with aperture diameters of 50 and 90µm to produce microgel bioink. The bioinks made with both microgel sizes showed excellent rheological properties and were used for high-resolution printing of objects with overhanging features without requiring a support structure or support bath. The AlgMA crosslinker has a dual role, allowing for both primary photocrosslinking of the bulk hydrogel as well as secondary ionic crosslinking of produced microgels, to quickly stabilize the printed construct in a calcium bath and to produce a microporous scaffold. Scaffolds showed ∼20% porosity, and they supported viability and chondrogenesis of encapsulated human primary chondrocytes. Finally, a meniscus model was bioprinted, to demonstrate the bioink's versatility at printing large, cell-laden constructs which are stable for furtherin vitroculture to promote cartilaginous tissue production. This easy and scalable strategy of producing zwitterionic microgel bioink for high resolution extrusion bioprinting allows for direct cell encapsulation in a microporous scaffold and has potential forin vivobiocompatibility due to the zwitterionic nature of the bioink.

Alginate-metal cation interactions: Macromolecular approach

Alginates are a broad family of linear (unbranched) polysaccharides derived from brown seaweeds and some bacteria. Despite having only two monomers, i.e. β-d-mannuronate (M) and its C5 epimer α-l-guluronate (G), their blockwise arrangement in oligomannuronate (..MMM..), oligoguluronate (..GGG..), and polyalternating (..MGMG..) blocks endows it with a rather complex interaction pattern with specific counterions and salts. Classic polyelectrolyte theories well apply to alginate as polyanion in the interaction with monovalent and non-gelling divalent cations. The use of divalent gelling ions, such as Ca2+, Ba2+ or Sr2+, provides thermostable homogeneous or heterogeneous hydrogels where the block composition affects both macroscopic and microscopic properties. The mechanism of alginate gelation is still explained in terms of the original egg-box model, although over the years some novel insights have been proposed. In this review we summarize several decades of research related to structure-functionships in alginates in the presence of non-gelling and gelling cations and present some novel applications in the field of self-assembling nanoparticles and use of radionuclides.

Progress and prospects of polysaccharide-based nanocarriers for oral delivery of proteins/peptides

The oral route has long been recognized as the most preferred route for drug delivery as it offers high patient compliance and requires minimal expertise. Unlike small molecule drugs, the harsh environment of the gastrointestinal tract and low permeability across the intestinal epithelium make oral delivery extremely ineffective for macromolecules. Accordingly, delivery systems that are rationally constructed with suitable materials to overcome barriers to oral delivery are exceptionally promising. Among the most ideal materials are polysaccharides. Depending on the interaction between polysaccharides and proteins, the thermodynamic loading and release of proteins in the aqueous phase can be realized. Specific polysaccharides (dextran, chitosan, alginate, cellulose, etc.) endow systems with functional properties, including muco-adhesiveness, pH-responsiveness, and prevention of enzymatic degradation. Furthermore, multiple groups in polysaccharides can be modified, which gives them a variety of properties and enables them to suit specific needs. This review provides an overview of different types of polysaccharide-based nanocarriers based on different kinds of interaction forces and the influencing factors in the construction of polysaccharide-based nanocarriers. Strategies of polysaccharide-based nanocarriers to improve the bioavailability of orally administered proteins/peptides were described. Additionally, current restrictions and future trends of polysaccharide-based nanocarriers for oral delivery of proteins/peptides were also covered.

Experimental Advances in the Real-Time Recording of Cross-Linking Alginate In Situ Gelation: A Review

Alginate-based hydrogels are promising smart materials widely employed in the food, bioengineering, and energy sectors. The development and optimization of their production require a thorough knowledge of gelation. In recent years, advanced experimental procedures have been developed for real-time cross-linking alginate reaction monitoring. Novel methods, such as customized rheometric setups, enable the recording of mechanical properties and morphological changes during hydrogel formation. These innovative techniques provide important insights into the gelation stages, the reaction rate, the diffusion of cross-linker to polymer chains, and the homogeneity of the gelling structures. Based on real-time experimental data, kinetic models are developed to enhance comprehension of the reaction mechanism and, eventually, to predict the gelation progress. The aim is to enable better control of the characterization of both the complex gelation and the propagated structures. This review aspires to present a comprehensive overview and evaluation of the breakthrough innovations of the real-time in situ recording of cross-linking alginate hydrogels and bead formation. A detailed analysis of the pioneering experimental developments provides a deep comprehension of the alginate gelation, including the parameters controlling the reaction.

A calcium and zinc composite alginate hydrogel for pre-hospital hemostasis and wound care

We developed, characterized, and examined the hemostatic potential of sodium alginate-based Ca²⁺ and Zn²⁺ composite hydrogel (SA-CZ). SA-CZ hydrogel showed substantial in-vitro efficacy, as observed by the significant reduction in coagulation time with better blood coagulation index (BCI) and no evident hemolysis in human blood. SA-CZ significantly reduced bleeding time (≈60 %) and mean blood loss (≈65 %) in the tail bleeding and liver incision in the mice hemorrhage model (p ≤ 0.001). SA-CZ also showed enhanced cellular migration (1.58-fold) in-vitro and improved wound closure (≈70 %) as compared with betadine (≈38 %) and saline (≈34 %) at the 7th-day post-wound creation in-vivo (p < 0.005). Subcutaneous implantation and intra-venous gamma-scintigraphy of hydrogel revealed ample body clearance and non-considerable accumulation in any vital organ, proving its non-thromboembolic nature. Overall, SA-CZ showed good biocompatibility along with efficient hemostasis and wound healing qualities, making it suitable as a safe and effective aid for bleeding wounds.

Investigating pore-opening in hydrogel foams at the scale of free-standing thin films

Controlling the pore connectivity of polymer foams is key for most of their applications, ranging from liquid uptake, mechanics, and acoustic/thermal insulation to tissue engineering. Despite its importance, the scientific phenomena governing the pore-opening processes remain poorly understood, requiring tedious trial-and-error procedures for property optimisation. This lack of understanding is partly explained by the high complexity of the different interrelated, multi-scale processes which take place as the foam transforms from an initially fluid foam into a solid foam. To progress in this field, we take inspiration from long-standing research on liquid foams and thin films to develop model experiments in a microfluidic "Thin Film Pressure Balance". These experiments allow us to investigate isolated thin films under well-controlled environmental conditions reproducing those arising within a foam undergoing cross-linking and drying. Using the example of alginate hydrogel films, we correlate the evolution of isolated thin films undergoing gelation and drying with the evolution of the rheological properties of the same alginate solution in bulk. We introduce the overall approach and use a first set of results to propose a starting point for the phenomenological description of the different types of pore-opening processes and the classification of the resulting pore-opening types. This article is protected by copyright. All rights reserved.

Reprogramming bone progenitor identity and potency through control of collagen density and oxygen tension

The biophysical microenvironment of the cell is being increasingly used to control cell signaling and to direct cell function. Herein, engineered 3D tuneable biomimetic scaffolds are used to control the cell microenvironment of Adipose-derived Mesenchymal Stromal Cells (AMSC), which exhibit a collagen density-specific profile for early and late stage bone cell lineage status. Cell potency was enhanced when AMSCs were cultured within low collagen density environments in hypoxic conditions. A transitional culture containing varied collagen densities in hypoxic conditions directed differential cell fate responses. The early skeletal progenitor identity (PDPN⁺CD146⁻CD73⁺CD164⁺) was rescued in the cells which migrated into low collagen density gels, with cells continuously exposed to the high collagen density gels displaying a transitioned bone-cartilage-stromal phenotype (PDPN⁺CD146⁺CD73⁻CD164^-). This study uncovers the significant contributions of the physical and physiological cell environment and highlights a chemically independent methodology for reprogramming and isolating skeletal progenitor cells from an adipose-derived cell population.

•

Fabrication of a 3D transitional culture to control adipose-derived MSC (AMSC) fate

•

AMSC potency is enhanced in low collagen density gels under hypoxic conditions

•

Early skeletal progenitor identity of AMSCs is enriched in a low collagen density gel

•

Bone-cartilage-stromal identity of AMSCs is enriched in a high collagen density gel

Poly (vinyl alcohol)-alginate as potential matrix for various applications: A focused review

Advances in polymers have made significant contribution in diverse application oriented fields. Multidisciplinary applicability of polymers generates a range of strategies, which is pertinent in a wide range of fields. Blends of natural and synthetic polymers have spawned a different class of materials with synergistic effects. Specifically, poly (vinyl alcohol) (PVA) and alginate (AG) blends (PVAG) have demonstrated some promising results in almost every segment, ranging from biomedical to industrial sector. Combination of PVAG with other materials, immobilization with specific moieties and physical and chemical crosslinking could result in amendments in the structure and properties of the PVAG matrices. Here, we provide an overview of the recent developments in designing PVAG based matrix and complexes with their structural and functional properties. The article also provides a comprehensive outline on the applicability of PVAG matrix in wastewater treatment, biomedical, photocatalysis, food packaging, and fuel cells and sheds light on the challenges that need to be addressed. Finally, the review elaborates the future prospective of PVAG matrices in other unexplored fields like aircraft industry, nuclear science and space exploration.

Direct observation of peptide hydrogel self-assembly

The characterization of self-assembling molecules presents significant experimental challenges, especially when associated with phase separation or precipitation. Transparent window infrared (IR) spectroscopy leverages site-specific probes that absorb in the “transparent window” region of the biomolecular IR spectrum. Carbon–deuterium (C–D) bonds are especially compelling transparent window probes since they are non-perturbative, can be readily introduced site selectively into peptides and proteins, and their stretch frequencies are sensitive to changes in the local molecular environment. Importantly, IR spectroscopy can be applied to a wide range of molecular samples regardless of solubility or physical state, making it an ideal technique for addressing the solubility challenges presented by self-assembling molecules. Here, we present the first continuous observation of transparent window probes following stopped-flow initiation. To demonstrate utility in a self-assembling system, we selected the MAX1 peptide hydrogel, a biocompatible material that has significant promise for use in drug delivery and medical applications. C–D labeled valine was synthetically introduced into five distinct positions of the twenty-residue MAX1 β-hairpin peptide. Consistent with current structural models, steady-state IR absorption frequencies and linewidths of C–D bonds at all labeled positions indicate that these side chains occupy a hydrophobic region of the hydrogel and that the motion of side chains located in the middle of the hairpin is more restricted than those located on the hairpin ends. Following a rapid change in ionic strength to initiate self-assembly, the peptide absorption spectra were monitored as function of time, allowing determination of site-specific time constants. We find that within the experimental resolution, MAX1 self-assembly occurs as a cooperative process. These studies suggest that stopped-flow transparent window FTIR can be extended to other time-resolved applications, such as protein folding and enzyme kinetics.

To facilitate the characterization of phase-transitioning molecules, site-specific non-perturbative infrared probes are leveraged for continuous observation of the self-assembly of fibrils in a peptide hydrogel following stopped-flow initiation.

Alginate Modification and Lectin-Conjugation Approach to Synthesize the Mucoadhesive Matrix

Alginates are natural anionic polyelectrolytes investigated in various biomedical applications, such as drug delivery, tissue engineering, and 3D bioprinting. Functionalization of alginates is one possible way to provide a broad range of requirements for those applications. A range of techniques, including esterification, amidation, acetylation, phosphorylation, sulfation, graft copolymerization, and oxidation and reduction, have been implemented for this purpose. The rationale behind these investigations is often the combination of such modified alginates with different molecules. Particularly promising are lectin conjugate macromolecules for lectin-mediated drug delivery, which enhance the bioavailability of active ingredients on a specific site. Most interesting for such application are alginate derivatives, because these macromolecules are more resistant to acidic and enzymatic degradation. This review will report recent progress in alginate modification and conjugation, focusing on alginate-lectin conjugation, which is proposed as a matrix for mucoadhesive drug delivery and provides a new perspective for future studies with these conjugation methods.

Evaluation of calcium alginate bead formation kinetics: An integrated analysis through light microscopy, rheology and microstructural SAXS

Ca(II)-alginate beads are being produced for a broad spectrum of biotechnological uses. Despite the simplicity of their manufacturing process, in these highly complex arrangements, the final properties of the material strongly depend on the supramolecular scaffolding. Here we present a cost-effective automatized Optical Video Microscopy approach for in situ evaluation of the kinetics of alginate bead formation. With simple mathematic modeling of the acquired data, we obtained key parameters that reveal valuable information on the system: the time course of gel-front migration correlates with the plateau of the storage module, and total volume shrinkage is highly related to the stabilization of shear strain and shear stress at the yield point. Our results provide feasible and reproducible tools, which allow for a better interpretation of bead formation kinetics and a rapid screening technique to use while designing gelling materials with specific properties for technological applications.

3D-Reactive printing of engineered alginate inks

Alginate is a common component of bioinks due to its well-described ionic crosslinking mechanism and tunable viscoelastic properties. Extrusion-based 3D-printing of alginate inks requires additives, such as gelatin and Pluronic, pre- or post-printing crosslinking processes and/or coextrusion with crosslinkers. In this work, we aim to develop a different printing approach for alginate-based inks, introducing 3D-reactive printing. Indeed, the control over the crosslinking kinetics and the printing time allowed printing different inks while maintaining their final composition unaltered to identify a suitable formulation in terms of printability. Alginate solutions were crosslinked with insoluble calcium salts (CaCO₃) inducing a dynamic modification of their microstructure and viscoelastic properties over time. The monitoring of fiber printability and internal microstructure, at different time points of ink gelation, was performed by means of a well-defined set of rheological tests to obtain a priori ink properties for the a posteriori 3D-printing process. This new perspective allowed 3D-reactive printing of alginate fibers with predetermined properties, without involving post-extrusion crosslinking steps and additives.

Engineering the Multi-Enzymatic Activity of Cerium Oxide Nanoparticle Coatings for the Antioxidant Protection of Implants

Imbalance of oxidants is a universal contributor to the failure of implanted devices and tissues. A sustained oxidative environment leads to cytotoxicity, prolonged inflammation, and ultimately host rejection of implanted devices/grafts. The incorporation of antioxidant materials can inhibit this redox/inflammatory cycle and enhance implant efficacy. Cerium oxide nanoparticles (CONP) is a highly promising agent that exhibits potent, ubiquitous, and self-renewable antioxidant properties. Integrating CONP as surface coatings provides ease in translating antioxidant properties to various implants/grafts. Herein, we describe the formation of CONP coatings, generated via the sequential deposition of CONP and alginate, and the impact of coating properties, pH, and polymer molecular weight, on their resulting redox profile. Investigation of CONP deposition, layer formation, and coating uniformity/thickness on their resulting oxidant scavenging activity identified key parameters for customizing global antioxidant properties. Results found lower molecular weight alginates and physiological pH shift CONP activity to a higher H2O2 to O2 --scavenging capability. The antioxidant properties measured for these various coatings translated to distinct antioxidant protection to the underlying encapsulated cells. Information gained from this work can be leveraged to tailor coatings towards specific oxidant-scavenging applications and prolong the function of medical devices and cellular implants.

Alginate-Assisted Lemongrass (Cymbopogon nardus) Essential Oil Dispersions for Antifungal Activity

The use of natural compounds as food preservatives is becoming increasingly popular as it is perceived positively by consumers. Among these substances, essential oils have attracted great interest owing to their antioxidant and antimicrobial properties. However, several challenges impair the use of essential oils in food products, such as their degradation or loss during food processing and storage, the strong aroma, even at low concentrations, which may negatively affect the sensory characteristics of food. In this context, the development of nanoformulations able to stabilize essential oils may represent a smart solution to this issue. The aim of the study was to evaluate the efficiency of alginate-based nanoformulations enriched with lemongrass (Cymbopogon nardus) essential oil (LEO) and Tween 80 against several fungi namely Penicillium expansus, Aspergillus niger and Rhizopus spp. Firstly, the flow behavior of systems at different concentrations of alginate (1%, 2% and 3% w/w) were studied. Then, emulsion-based nanoformulations at different concentrations of lemongrass essential oil in the range of 0-2% w/w were stabilized by a fixed amount of Tween 80, characterized and tested for their antifungal activity. Our results showed that the best nanoformulation able to inhibit Rhizopus spp., Penicillium expansum and Aspergillus niger, for at least 10 days, was constituted by 1% alginate/1.5% LEO/1% Tween 80. Hence, the incorporation of essential oil into nanoformulation systems may represent a valid alternative to overcome the disadvantages that limit the commercial application of essential oils.

Feasibility and safety of calcium alginate hydrogel sealant for the treatment of cryptoglandular fistula-in-ano: phase I/IIa clinical trial

AIM

Complex perianal fistulas pose a challenge to the surgeon since the fistulous tract must be eliminated without impairing continence. Although without strong scientific evidence, some bibliography has demonstrated the efficacy of some sealants in the treatment of anal fistulas. We aimed to assess the feasibility and safety of calcium alginate hydrogel injections into the fistulous tract as treatment for trans-sphincteric cryptoglandular fistulas.

METHODS

A prospective, single-centre, case series of this novel technique was conducted in a level 3 Spanish hospital, including patients diagnosed with trans-sphincteric perianal fistulas and treated with a calcium alginate hydrogel sealant. A strict follow-up was performed by an independent surgeon at 1, 3, 6 and 12 months. The main outcome measures were feasibility, safety (number of adverse events) and efficacy of the treatment.

RESULTS

Twenty patients were treated. The treatment was performed for all patients. Seven adverse events related to the injection product or the surgical procedure were identified. After a 12-month follow-up, 12 patients were completely cured and eight were not cured, with a greater response in the first 6 months. These findings were confirmed by endoanal ultrasound, with a Cohen's kappa concordance rate of 0.89. No statistically significant differences were observed in pain measured using the visual analogue scale, faecal incontinence measured using the Wexner scoring system, and quality of life analysed by the SF-36 Health Survey.

CONCLUSION

The treatment was feasible, safe and with discrete satisfactory healing results. It also demonstrated an acceptable safety profile, without worsening of faecal incontinence, quality of life and pain following treatment.

Printable homocomposite hydrogels with synergistically reinforced molecular-colloidal networks

The design of hydrogels where multiple interpenetrating networks enable enhanced mechanical properties can broaden their field of application in biomedical materials, 3D printing, and soft robotics. We report a class of self-reinforced homocomposite hydrogels (HHGs) comprised of interpenetrating networks of multiscale hierarchy. A molecular alginate gel is reinforced by a colloidal network of hierarchically branched alginate soft dendritic colloids (SDCs). The reinforcement of the molecular gel with the nanofibrillar SDC network of the same biopolymer results in a remarkable increase of the HHG’s mechanical properties. The viscoelastic HHGs show >3× larger storage modulus and >4× larger Young’s modulus than either constitutive network at the same concentration. Such synergistically enforced colloidal-molecular HHGs open up numerous opportunities for formulation of biocompatible gels with robust structure-property relationships. Balance of the ratio of their precursors facilitates precise control of the yield stress and rate of self-reinforcement, enabling efficient extrusion 3D printing of HHGs.

Composites which are made up of a single polymer, and yet allow modulation of the mechanical properties of the matrix without stress concentration, are challenging to fabricate. Here, the authors design a selfreinforced homocomposite alginate hydrogel with enhanced mechanical properties incorporating soft dendritic alginate colloids in the matrix and demonstrate its application in extrusion printing.

Nanostructured lipid carriers containing chitosan or sodium alginate for co-encapsulation of antioxidants and an antimicrobial agent for potential application in wound healing

The high incidence and costs of chronic wounds in the elderly have motivated the search for innovations to improve product performance and the healing process while reducing costs. In this study, bioadhesive nanostructured lipid carriers (NLC) were developed for the co-encapsulation of compounds with antioxidant (α-tocopherol and quercetin) and antimicrobial (tea tree oil) activity for management of wounds. The NLC was produced with shea butter and argan oil, and modified with sodium alginate or chitosan to confer bioadhesive properties. Spherical nanoparticles of ~307-330 nm and zeta potential varying from -21.2 to +11.8 mV were obtained. Thermal analysis demonstrated that the lipid matrix reduced tea tree oil thermal loss (~1.8-fold). Regardless of the type of polysaccharide employed, the NLCs promoted cutaneous localization of antioxidants in damaged (subjected to incision) skin, with a ~74 to 180-fold higher delivery into the skin compared to percutaneous delivery. This result is consistent with the similar bioadhesive properties of chitosan or sodium alginate-modified NLC. Nanoencapsulation of tea tree oil did not preclude its antimicrobial effects against susceptible and resistant strains of S. aureus and P. aeruginosa, while co-encapsulation of antioxidants increased the NLC-induced fibroblasts migration, supporting their potential usefulness for management of wounds.

Ions-induced gelation of alginate: Mechanisms and applications

Alginate is an important natural biopolymer and has been widely used in the food, biomedical, and chemical industries. Ca²⁺-induced gelation is one of the most important functional properties of alginate. The gelation mechanism is well-known as egg-box model, which has been intensively studied in the last five decades. Alginate also forms gels with many other monovalent, divalent or trivalent cations, and their gelation can possess different mechanisms from that of Ca²⁺-induced gelation. The resulted gels also exhibit different properties that lead to various applications. This study is proposed to summarize the gelation mechanisms of alginate induced by different cations, mainly including H⁺, Ca²⁺, Ba²⁺, Cu²⁺, Sr²⁺, Zn²⁺, Fe²⁺, Mn²⁺, Al³⁺, and Fe³⁺. The mechanism of H⁺-induced gelation of alginate mainly depends on the protonation of carboxyl groups. Divalent ions-induced gelation of alginate show different selection towards G, M, and GM blocks. Trivalent ions can bind to carboxyl groups of uronates with no selection. The properties and applications of these ionotropic alginate gels are also discussed. The knowledge gained in this study would provide useful information for the practical applications of alginate.

Hydrogels of Polysaccharide Carboxymethyl Hydroxypropyl Guar Crosslinked by Multivalent Metal Ions

Abstract

Hydrogels of polysaccharide carboxymethyl hydroxypropyl guar crosslinked by chromium(III) ions are synthesized. The effect of crosslinker concentration on the mechanical behavior of the gels is studied, and the amount of chromium compounds able to interact with polymer chains and the amount of carboxyl groups of the polymer involved in crosslinking are compared. It is shown that the elastic modulus of the gels attains a constant value when not all but only about 10% functional groups interact with chromium compounds. At high concentrations, crosslinker molecules basically bind to one functional group; as a result, the gel recharges. This binding proceeds until all carboxyl groups are filled.

Rheological Investigation of Thermoresponsive Alginate-Methylcellulose Gels for Epidermal Growth Factor Formulation

Epidermal growth factors (EGF) serve as promising candidates for skin regeneration and rejuvenation products, but their instability hinders them from widespread use. Protective immobilization and directed release can be achieved through implementing a hydrogel delivery system. Alginate and methylcellulose are both natural polymers offering biocompatibility and environmental sensitivity. This blended gel system was investigated rheologically to understand its performance in topical applications. Alginate and methylcellulose were found to form a synergistic gel system that resulted in superior viscosity and thermoresponsiveness compared to the individual components. Increasing methylcellulose concentration directly enhanced gel elasticity, and higher viscosities provided better thermal protection of EGF. The addition of EGF at 3.33 mg/mL resulted in a decrease of viscosity but an increase in viscoelastic modulus. EGF concentration also played a large role in shear viscosity and thermoresponsiveness of the ternary system. An alginate-methylcellulose system presents promising rheological tunability, which may provide EGF thermal protection in a topical delivery format.

Effect of nanoemulsion modification with chitosan and sodium alginate on the topical delivery and efficacy of the cytotoxic agent piplartine in 2D and 3D skin cancer models

Due to the limited options for topical management of skin cancer, this study aimed at developing and evaluating nanoemulsions (NE) for topical delivery of the cytotoxic agent piplartine (piperlongumine). NEs were modified with chitosan or sodium alginate, and the effects on the physicochemical properties, piplartine delivery and formulation efficacy were evaluated. The nanoemulsion droplets displayed similar size (96-112 nm), but opposite charge; the polysaccharides improved piplartine penetration into and across the skin (1.3-1.9-fold) in a similar manner, increasing the ratio "drug in the skin/receptor phase" by 1.4-1.5-fold compared to the plain NE and highlighting their relevance for cutaneous localization. Oleic acid addition to the chitosan-containing NE further increased drug penetration (~1.9-2.0-fold), as did increases in drug content from 0.5 to 1%. The cytotoxicity of piplartine was ~2.8-fold higher when the drug was incorporated in the chitosan-containing NE compared to its solution (IC50 = 14.6 μM) against melanoma cells. The effects of this nanocarrier on 3D melanoma tissues were concentration-related; at 1%, piplartine elicited marked epidermis destruction. These results support the potential applicability of the chitosan-modified nanoemulsion containing piplartine as a new strategy for local management of skin cancer.

Custom-made rheological setup for in situ real-time fast alginate-Ca2+ gelation

There is a growing interest in the in situ gelation of the alginate-Ca²⁺ system due to its remarkable applications. In this work, we record and evaluate the fast gelation kinetics of alginate-Ca²⁺ using a custom-made rheometric setup. This enables us to inject CaCl₂ into the alginate while we perform the rheological measurements. We successfully measure the in situ gelation reaction from the early stages. As the alginate concentration is increased up to 3 wt.%, we observe a systematic increase of the elastic modulus, G'. Similarly, higher concentrations and injected volumes of CaCl₂ increase the magnitude and initial growth rate of G'. At longer times, the growth rate of G' is lower. It decreases further very slowly, indicating that the chemical reaction requires quite a considerable amount of time to be completed. Finally, from the rheometric data, we estimate the average rates of the elastic modulus during the initial and quasi-steady-state stages.

Effects of Starch Incorporation on the Physicochemical Properties and Release Kinetics of Alginate-Based 3D Hydrogel Patches for Topical Delivery

The development of printable hydrogel inks for extrusion-based 3D printing is opening new possibilities to the production of new and/or improved pharmaceutical forms, specifically for topical application. Alginate and starch are natural polysaccharides that have been extensively exploited due to their biocompatibility, biodegradability, viscosity properties, low toxicity, and relatively low cost. This research work aimed to study the physicochemical and release kinetic effects of starch incorporation in alginate-based 3D hydrogel patches for topical delivery using a quality by design approach. The incorporation of a pregelatinized starch is also proposed as a way to improve the properties of the drug delivery system while maintaining the desired quality characteristics. Critical material attributes and process parameters were identified, and the sensitivity and adequacy of each parameter were statistically analyzed. The impact of alginate, starch, and CaCl₂·2H₂O amounts on relevant quality attributes was estimated crosswise. The amount of starch revealed a synergetic impact on porosity (p = 0.0021). An evident increase in the size and quantity of open pores were detected in the as printed patches as well as after crosslinking (15.6 ± 5.2 µm). In vitro drug release studies from the optimized alginate-starch 3D hydrogel patch, using the probe Rhodamine B, showed an initial high burst release, followed by a controlled release mechanism. The results obtained also showed that the viscoelastic properties, printing accuracy, gelation time, microstructure, and release rates can be modulated by varying the amount of starch added to the system. Furthermore, these results can be considered an excellent baseline for future drug release modulation strategies.

Monitoring of infection volatile markers using CMOS-based luminescent bioreporters

Over the past two decades, whole-cell biosensors (WCBs) have been widely used in the environmental field, with only few applications proposed for use in agricultural. This study describes the development and optimization of a WCB for the detection of volatile organic compounds (VOCs) that is produced specifically by infected potato tubers. First, the effect of calcium-alginate matrix formation (beads vs. tablets) on the membrane uniformity and sensing efficiency was evaluated. Then, important parameters in the immobilization process were examined for their effect on the sensitivity to the presence of VOCs. The highest sensitivity to the target VOC was obtained by 20 min polymerization of bacterial suspension with optical density of 0.2 at 600 nm, dissolved in low-viscosity sodium alginate (1.5% w/v) and exposure to VOC at 4 °C. After optimization, the lowest limit of detection for three infection-sourced VOCs (nonanal, 3-methyl-1-butanol, and 1-octen-3-ol) was 0.17-, 2.03-, and 2.09-mg/L, respectively, and the sensor sensitivity was improved by 8.9-, 3.1- and 2-fold, respectively. Then, the new optimized immobilization protocol was implemented for the CMOS-based application, which increased the sensor sensitivity to VOC by 3-fold during real-time measurement. This is the first step in creating a sensor for real-time monitoring of crop quality by identifying changes in VOC patterns.

Modulating Alginate Hydrogels for Improved Biological Performance as Cellular 3D Microenvironments

The rational choice and design of biomaterials for biomedical applications is crucial for successful in vitro and in vivo strategies, ultimately dictating their performance and potential clinical applications. Alginate, a marine-derived polysaccharide obtained from seaweeds, is one of the most widely used polymers in the biomedical field, particularly to build three dimensional (3D) systems for in vitro culture and in vivo delivery of cells. Despite their biocompatibility, alginate hydrogels often require modifications to improve their biological activity, namely via inclusion of mammalian cell-interactive domains and fine-tuning of mechanical properties. These modifications enable the addition of new features for greater versatility and control over alginate-based systems, extending the plethora of applications and procedures where they can be used. Additionally, hybrid systems based on alginate combination with other components can also be explored to improve the mimicry of extracellular microenvironments and their dynamics. This review provides an overview on alginate properties and current clinical applications, along with different strategies that have been reported to improve alginate hydrogels performance as 3D matrices and 4D dynamic systems.

Disassembling the complexity of mucus barriers to develop a fast screening tool for early drug discovery

Mucus is a natural barrier with a protective role that hinders drug diffusion, representing a steric and interactive barrier to overcome for an effective drug delivery to target sites. In diseases like cystic fibrosis (CF), pulmonary mucus exhibits altered features, which hamper clearance mechanisms and drug diffusion, ultimately leading to lung failure. Effectively modelling the passage through mucus still represents an unmet challenge. An airway CF mucus model is herein proposed to disassemble the complexity of the mucus barrier following a modular approach. A hydrogel, mainly composed of mucin in an alginate (Alg) network, is proposed to specifically model the chemical-physical properties of CF mucus. The steric retention of pathological mucus was reproduced by targeting its mesh size (approximately 50 nm) and viscoelastic properties. The interactive barrier was reproduced by a composition inspired from the CF mucus. Optimized mucus models, composed of 3 mg ml-1 Alg and 25 mg ml-1 mucin, exhibited a G' increasing from ∼21.2 to 55.2 Pa and a G'' ranging from ∼5.26 to 28.8 Pa in the frequency range of 0.1 to 20 Hz. Drug diffusion was tested using three model drugs. The proposed mucus model was able to discriminate between the mucin-drug interaction and the steric barrier of a mucus layer with respect to the parallel artificial membrane permeability (PAMPA) that models the phospholipidic cell membrane, the state-of-the-art screening tool for passive drug diffusion. The mucus model can be proposed as an in vitro tool for early drug discovery, representing a step forward to model the mucus layer. Additionally, the proposed methodology allows to easily include other molecules present within mucus, as relevant proteins, lipids and DNA.

Egg-box model-based gelation of alginate and pectin: A review

Alginate and pectin are emblematic natural polyuronates that have been widely used in food, cosmetics and medicine. Ca-dependent gelation is one of their most important functional properties. The gelation mechanisms of alginate and pectin, known as egg-box model, were believed to be basically the same, because their Ca-binding sites show a mirror symmetric conformation. However, studies have found that the formation and the structure of egg-box dimmers between alginate and pectin were different. Very few studies have reviewed those differences. Therefore, this study was proposed to first summarize the intrinsic and extrinsic factors that can influence the gelation of alginate and pectin. The differences in the effect of these factors on the gelation of alginate and pectin were then discussed. Meanwhile, the similarity and difference in their gelation mechanism was also summarized. The knowledge gained in this review would provide useful information for the practical applications of alginate and pectin.

In-vivo vascular application via ultra-fast bioprinting for future 5D personalised nanomedicine

The design of 3D complex structures enables new correlation studies between the engineering parameters and the biological activity. Moreover, additive manufacturing technology could revolutionise the personalised medical pre-operative management due to its possibility to interplay with computer tomography. Here we present a method based on rapid freeze prototyping (RFP) 3D printer, reconstruction cutting, nano dry formulation, fast freeze gelation, disinfection and partial processes for the 5D digital models functionalisation. We elaborated the high-resolution computer tomography scan derived from a complex human peripheral artery and we reconstructed the 3D model of the vessel in order to obtain and verify the additive manufacturing processes. Then, based on the drug-eluting balloon selected for the percutaneous intervention, we reconstructed the biocompatible eluting-freeform coating containing 40 nm fluorescent nanoparticles (NPs) by means of RFP printer and we tested the in-vivo feasibility. We introduced the NPs-loaded 5D device in a rat's vena cava. The coating dissolved in a few minutes releasing NPs which were rapidly absorbed in vascular smooth muscle cell (VSMC) and human umbilical vein endothelial cell (HUVEC) in-vitro. We developed 5D high-resolution self-dissolving devices incorporating NPs with the perspective to apply this method to the personalised medicine.